drivers/usb/mtu3/mtu3_plat.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2016 MediaTek Inc.
   4  *
   5  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
   6  */
   7
   8 #include <linux/clk.h>
   9 #include <linux/dma-mapping.h>
  10 #include <linux/iopoll.h>
  11 #include <linux/kernel.h>
  12 #include <linux/module.h>
  13 #include <linux/of_address.h>
  14 #include <linux/of_irq.h>
  15 #include <linux/platform_device.h>
  16
  17 #include "mtu3.h"
  18 #include "mtu3_dr.h"
  19
  20 /* u2-port0 should be powered on and enabled; */
  21 int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
  22 {
  23         void __iomem *ibase = ssusb->ippc_base;
  24         u32 value, check_val;
  25         int ret;
  26
  27         check_val = ex_clks | SSUSB_SYS125_RST_B_STS | SSUSB_SYSPLL_STABLE |
  28                         SSUSB_REF_RST_B_STS;
  29
  30         ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
  31                         (check_val == (value & check_val)), 100, 20000);
  32         if (ret) {
  33                 dev_err(ssusb->dev, "clks of sts1 are not stable!\n");
  34                 return ret;
  35         }
  36
  37         ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value,
  38                         (value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000);
  39         if (ret) {
  40                 dev_err(ssusb->dev, "mac2 clock is not stable\n");
  41                 return ret;
  42         }
  43
  44         return 0;
  45 }
  46
  47 static int ssusb_phy_init(struct ssusb_mtk *ssusb)
  48 {
  49         int i;
  50         int ret;
  51
  52         for (i = 0; i < ssusb->num_phys; i++) {
  53                 ret = phy_init(ssusb->phys[i]);
  54                 if (ret)
  55                         goto exit_phy;
  56         }
  57         return 0;
  58
  59 exit_phy:
  60         for (; i > 0; i--)
  61                 phy_exit(ssusb->phys[i - 1]);
  62
  63         return ret;
  64 }
  65
  66 static int ssusb_phy_exit(struct ssusb_mtk *ssusb)
  67 {
  68         int i;
  69
  70         for (i = 0; i < ssusb->num_phys; i++)
  71                 phy_exit(ssusb->phys[i]);
  72
  73         return 0;
  74 }
  75
  76 static int ssusb_phy_power_on(struct ssusb_mtk *ssusb)
  77 {
  78         int i;
  79         int ret;
  80
  81         for (i = 0; i < ssusb->num_phys; i++) {
  82                 ret = phy_power_on(ssusb->phys[i]);
  83                 if (ret)
  84                         goto power_off_phy;
  85         }
  86         return 0;
  87
  88 power_off_phy:
  89         for (; i > 0; i--)
  90                 phy_power_off(ssusb->phys[i - 1]);
  91
  92         return ret;
  93 }
  94
  95 static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
  96 {
  97         unsigned int i;
  98
  99         for (i = 0; i < ssusb->num_phys; i++)
 100                 phy_power_off(ssusb->phys[i]);
 101 }
 102
 103 static int ssusb_clks_enable(struct ssusb_mtk *ssusb)
 104 {
 105         int ret;
 106
 107         ret = clk_prepare_enable(ssusb->sys_clk);
 108         if (ret) {
 109                 dev_err(ssusb->dev, "failed to enable sys_clk\n");
 110                 goto sys_clk_err;
 111         }
 112
 113         ret = clk_prepare_enable(ssusb->ref_clk);
 114         if (ret) {
 115                 dev_err(ssusb->dev, "failed to enable ref_clk\n");
 116                 goto ref_clk_err;
 117         }
 118
 119         ret = clk_prepare_enable(ssusb->mcu_clk);
 120         if (ret) {
 121                 dev_err(ssusb->dev, "failed to enable mcu_clk\n");
 122                 goto mcu_clk_err;
 123         }
 124
 125         ret = clk_prepare_enable(ssusb->dma_clk);
 126         if (ret) {
 127                 dev_err(ssusb->dev, "failed to enable dma_clk\n");
 128                 goto dma_clk_err;
 129         }
 130
 131         return 0;
 132
 133 dma_clk_err:
 134         clk_disable_unprepare(ssusb->mcu_clk);
 135 mcu_clk_err:
 136         clk_disable_unprepare(ssusb->ref_clk);
 137 ref_clk_err:
 138         clk_disable_unprepare(ssusb->sys_clk);
 139 sys_clk_err:
 140         return ret;
 141 }
 142
 143 static void ssusb_clks_disable(struct ssusb_mtk *ssusb)
 144 {
 145         clk_disable_unprepare(ssusb->dma_clk);
 146         clk_disable_unprepare(ssusb->mcu_clk);
 147         clk_disable_unprepare(ssusb->ref_clk);
 148         clk_disable_unprepare(ssusb->sys_clk);
 149 }
 150
 151 static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 152 {
 153         int ret = 0;
 154
 155         ret = regulator_enable(ssusb->vusb33);
 156         if (ret) {
 157                 dev_err(ssusb->dev, "failed to enable vusb33\n");
 158                 goto vusb33_err;
 159         }
 160
 161         ret = ssusb_clks_enable(ssusb);
 162         if (ret)
 163                 goto clks_err;
 164
 165         ret = ssusb_phy_init(ssusb);
 166         if (ret) {
 167                 dev_err(ssusb->dev, "failed to init phy\n");
 168                 goto phy_init_err;
 169         }
 170
 171         ret = ssusb_phy_power_on(ssusb);
 172         if (ret) {
 173                 dev_err(ssusb->dev, "failed to power on phy\n");
 174                 goto phy_err;
 175         }
 176
 177         return 0;
 178
 179 phy_err:
 180         ssusb_phy_exit(ssusb);
 181 phy_init_err:
 182         ssusb_clks_disable(ssusb);
 183 clks_err:
 184         regulator_disable(ssusb->vusb33);
 185 vusb33_err:
 186         return ret;
 187 }
 188
 189 static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
 190 {
 191         ssusb_clks_disable(ssusb);
 192         regulator_disable(ssusb->vusb33);
 193         ssusb_phy_power_off(ssusb);
 194         ssusb_phy_exit(ssusb);
 195 }
 196
 197 static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
 198 {
 199         /* reset whole ip (xhci & u3d) */
 200         mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
 201         udelay(1);
 202         mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
 203 }
 204
 205 /* ignore the error if the clock does not exist */
 206 static struct clk *get_optional_clk(struct device *dev, const char *id)
 207 {
 208         struct clk *opt_clk;
 209
 210         opt_clk = devm_clk_get(dev, id);
 211         /* ignore error number except EPROBE_DEFER */
 212         if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
 213                 opt_clk = NULL;
 214
 215         return opt_clk;
 216 }
 217
 218 static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 219 {
 220         struct device_node *node = pdev->dev.of_node;
 221         struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 222         struct device *dev = &pdev->dev;
 223         struct regulator *vbus;
 224         struct resource *res;
 225         int i;
 226         int ret;
 227
 228         ssusb->vusb33 = devm_regulator_get(&pdev->dev, "vusb33");
 229         if (IS_ERR(ssusb->vusb33)) {
 230                 dev_err(dev, "failed to get vusb33\n");
 231                 return PTR_ERR(ssusb->vusb33);
 232         }
 233
 234         ssusb->sys_clk = devm_clk_get(dev, "sys_ck");
 235         if (IS_ERR(ssusb->sys_clk)) {
 236                 dev_err(dev, "failed to get sys clock\n");
 237                 return PTR_ERR(ssusb->sys_clk);
 238         }
 239
 240         ssusb->ref_clk = get_optional_clk(dev, "ref_ck");
 241         if (IS_ERR(ssusb->ref_clk))
 242                 return PTR_ERR(ssusb->ref_clk);
 243
 244         ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck");
 245         if (IS_ERR(ssusb->mcu_clk))
 246                 return PTR_ERR(ssusb->mcu_clk);
 247
 248         ssusb->dma_clk = get_optional_clk(dev, "dma_ck");
 249         if (IS_ERR(ssusb->dma_clk))
 250                 return PTR_ERR(ssusb->dma_clk);
 251
 252         ssusb->num_phys = of_count_phandle_with_args(node,
 253                         "phys", "#phy-cells");
 254         if (ssusb->num_phys > 0) {
 255                 ssusb->phys = devm_kcalloc(dev, ssusb->num_phys,
 256                                         sizeof(*ssusb->phys), GFP_KERNEL);
 257                 if (!ssusb->phys)
 258                         return -ENOMEM;
 259         } else {
 260                 ssusb->num_phys = 0;
 261         }
 262
 263         for (i = 0; i < ssusb->num_phys; i++) {
 264                 ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i);
 265                 if (IS_ERR(ssusb->phys[i])) {
 266                         dev_err(dev, "failed to get phy-%d\n", i);
 267                         return PTR_ERR(ssusb->phys[i]);
 268                 }
 269         }
 270
 271         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
 272         ssusb->ippc_base = devm_ioremap_resource(dev, res);
 273         if (IS_ERR(ssusb->ippc_base))
 274                 return PTR_ERR(ssusb->ippc_base);
 275
 276         ssusb->dr_mode = usb_get_dr_mode(dev);
 277         if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
 278                 ssusb->dr_mode = USB_DR_MODE_OTG;
 279
 280         if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
 281                 return 0;
 282
 283         /* if host role is supported */
 284         ret = ssusb_wakeup_of_property_parse(ssusb, node);
 285         if (ret)
 286                 return ret;
 287
 288         /* optional property, ignore the error if it does not exist */
 289         of_property_read_u32(node, "mediatek,u3p-dis-msk",
 290                              &ssusb->u3p_dis_msk);
 291
 292         vbus = devm_regulator_get(&pdev->dev, "vbus");
 293         if (IS_ERR(vbus)) {
 294                 dev_err(dev, "failed to get vbus\n");
 295                 return PTR_ERR(vbus);
 296         }
 297         otg_sx->vbus = vbus;
 298
 299         if (ssusb->dr_mode == USB_DR_MODE_HOST)
 300                 return 0;
 301
 302         /* if dual-role mode is supported */
 303         otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
 304         otg_sx->manual_drd_enabled =
 305                 of_property_read_bool(node, "enable-manual-drd");
 306
 307         if (of_property_read_bool(node, "extcon")) {
 308                 otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
 309                 if (IS_ERR(otg_sx->edev)) {
 310                         dev_err(ssusb->dev, "couldn't get extcon device\n");
 311                         return -EPROBE_DEFER;
 312                 }
 313         }
 314
 315         dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk: %x, drd: %s\n",
 316                 ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk,
 317                 otg_sx->manual_drd_enabled ? "manual" : "auto");
 318
 319         return 0;
 320 }
 321
 322 static int mtu3_probe(struct platform_device *pdev)
 323 {
 324         struct device_node *node = pdev->dev.of_node;
 325         struct device *dev = &pdev->dev;
 326         struct ssusb_mtk *ssusb;
 327         int ret = -ENOMEM;
 328
 329         /* all elements are set to ZERO as default value */
 330         ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL);
 331         if (!ssusb)
 332                 return -ENOMEM;
 333
 334         ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 335         if (ret) {
 336                 dev_err(dev, "No suitable DMA config available\n");
 337                 return -ENOTSUPP;
 338         }
 339
 340         platform_set_drvdata(pdev, ssusb);
 341         ssusb->dev = dev;
 342
 343         ret = get_ssusb_rscs(pdev, ssusb);
 344         if (ret)
 345                 return ret;
 346
 347         /* enable power domain */
 348         pm_runtime_enable(dev);
 349         pm_runtime_get_sync(dev);
 350         device_enable_async_suspend(dev);
 351
 352         ret = ssusb_rscs_init(ssusb);
 353         if (ret)
 354                 goto comm_init_err;
 355
 356         ssusb_ip_sw_reset(ssusb);
 357
 358         if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
 359                 ssusb->dr_mode = USB_DR_MODE_HOST;
 360         else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET))
 361                 ssusb->dr_mode = USB_DR_MODE_PERIPHERAL;
 362
 363         /* default as host */
 364         ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL);
 365
 366         switch (ssusb->dr_mode) {
 367         case USB_DR_MODE_PERIPHERAL:
 368                 ret = ssusb_gadget_init(ssusb);
 369                 if (ret) {
 370                         dev_err(dev, "failed to initialize gadget\n");
 371                         goto comm_exit;
 372                 }
 373                 break;
 374         case USB_DR_MODE_HOST:
 375                 ret = ssusb_host_init(ssusb, node);
 376                 if (ret) {
 377                         dev_err(dev, "failed to initialize host\n");
 378                         goto comm_exit;
 379                 }
 380                 break;
 381         case USB_DR_MODE_OTG:
 382                 ret = ssusb_gadget_init(ssusb);
 383                 if (ret) {
 384                         dev_err(dev, "failed to initialize gadget\n");
 385                         goto comm_exit;
 386                 }
 387
 388                 ret = ssusb_host_init(ssusb, node);
 389                 if (ret) {
 390                         dev_err(dev, "failed to initialize host\n");
 391                         goto gadget_exit;
 392                 }
 393
 394                 ssusb_otg_switch_init(ssusb);
 395                 break;
 396         default:
 397                 dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode);
 398                 ret = -EINVAL;
 399                 goto comm_exit;
 400         }
 401
 402         return 0;
 403
 404 gadget_exit:
 405         ssusb_gadget_exit(ssusb);
 406 comm_exit:
 407         ssusb_rscs_exit(ssusb);
 408 comm_init_err:
 409         pm_runtime_put_sync(dev);
 410         pm_runtime_disable(dev);
 411
 412         return ret;
 413 }
 414
 415 static int mtu3_remove(struct platform_device *pdev)
 416 {
 417         struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
 418
 419         switch (ssusb->dr_mode) {
 420         case USB_DR_MODE_PERIPHERAL:
 421                 ssusb_gadget_exit(ssusb);
 422                 break;
 423         case USB_DR_MODE_HOST:
 424                 ssusb_host_exit(ssusb);
 425                 break;
 426         case USB_DR_MODE_OTG:
 427                 ssusb_otg_switch_exit(ssusb);
 428                 ssusb_gadget_exit(ssusb);
 429                 ssusb_host_exit(ssusb);
 430                 break;
 431         default:
 432                 return -EINVAL;
 433         }
 434
 435         ssusb_rscs_exit(ssusb);
 436         pm_runtime_put_sync(&pdev->dev);
 437         pm_runtime_disable(&pdev->dev);
 438
 439         return 0;
 440 }
 441
 442 /*
 443  * when support dual-role mode, we reject suspend when
 444  * it works as device mode;
 445  */
 446 static int __maybe_unused mtu3_suspend(struct device *dev)
 447 {
 448         struct platform_device *pdev = to_platform_device(dev);
 449         struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
 450
 451         dev_dbg(dev, "%s\n", __func__);
 452
 453         /* REVISIT: disconnect it for only device mode? */
 454         if (!ssusb->is_host)
 455                 return 0;
 456
 457         ssusb_host_disable(ssusb, true);
 458         ssusb_phy_power_off(ssusb);
 459         ssusb_clks_disable(ssusb);
 460         ssusb_wakeup_enable(ssusb);
 461
 462         return 0;
 463 }
 464
 465 static int __maybe_unused mtu3_resume(struct device *dev)
 466 {
 467         struct platform_device *pdev = to_platform_device(dev);
 468         struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
 469         int ret;
 470
 471         dev_dbg(dev, "%s\n", __func__);
 472
 473         if (!ssusb->is_host)
 474                 return 0;
 475
 476         ssusb_wakeup_disable(ssusb);
 477         ret = ssusb_clks_enable(ssusb);
 478         if (ret)
 479                 goto clks_err;
 480
 481         ret = ssusb_phy_power_on(ssusb);
 482         if (ret)
 483                 goto phy_err;
 484
 485         ssusb_host_enable(ssusb);
 486
 487         return 0;
 488
 489 phy_err:
 490         ssusb_clks_disable(ssusb);
 491 clks_err:
 492         return ret;
 493 }
 494
 495 static const struct dev_pm_ops mtu3_pm_ops = {
 496         SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
 497 };
 498
 499 #define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
 500
 501 #ifdef CONFIG_OF
 502
 503 static const struct of_device_id mtu3_of_match[] = {
 504         {.compatible = "mediatek,mt8173-mtu3",},
 505         {.compatible = "mediatek,mtu3",},
 506         {},
 507 };
 508
 509 MODULE_DEVICE_TABLE(of, mtu3_of_match);
 510
 511 #endif
 512
 513 static struct platform_driver mtu3_driver = {
 514         .probe = mtu3_probe,
 515         .remove = mtu3_remove,
 516         .driver = {
 517                 .name = MTU3_DRIVER_NAME,
 518                 .pm = DEV_PM_OPS,
 519                 .of_match_table = of_match_ptr(mtu3_of_match),
 520         },
 521 };
 522 module_platform_driver(mtu3_driver);
 523
 524 MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
 525 MODULE_LICENSE("GPL v2");
 526 MODULE_DESCRIPTION("MediaTek USB3 DRD Controller Driver");