2 # USB Dual Role (OTG-ready) Controller Drivers
3 # for silicon based on Mentor Graphics INVENTRA designs
6 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
8 tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
9 depends on (USB || USB_GADGET)
11 Say Y here if your system has a dual role high speed USB
12 controller based on the Mentor Graphics silicon IP. Then
13 configure options to match your silicon and the board
14 it's being used with, including the USB peripheral role,
15 or the USB host role, or both.
17 Texas Instruments families using this IP include DaVinci
18 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
20 Analog Devices parts using this IP include Blackfin BF54x,
23 If you do not know what this is, please say N.
25 To compile this driver as a module, choose M here; the
26 module will be called "musb-hdrc".
31 bool "MUSB Mode Selection"
32 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
33 default USB_MUSB_HOST if (USB && !USB_GADGET)
34 default USB_MUSB_GADGET if (!USB && USB_GADGET)
38 depends on USB=y || USB=USB_MUSB_HDRC
40 Select this when you want to use MUSB in host mode only,
41 thereby the gadget feature will be regressed.
43 config USB_MUSB_GADGET
44 bool "Gadget only mode"
45 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
48 Select this when you want to use MUSB in gadget mode only,
49 thereby the host feature will be regressed.
51 config USB_MUSB_DUAL_ROLE
53 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
56 This is the default mode of working of MUSB controller where
57 both host and gadget features are enabled.
61 comment "Platform Glue Layer"
63 config USB_MUSB_DAVINCI
65 depends on ARCH_DAVINCI_DMx
69 tristate "DA8xx/OMAP-L1x"
70 depends on ARCH_DAVINCI_DA8XX
73 config USB_MUSB_TUSB6010
75 depends on ARCH_OMAP2PLUS || COMPILE_TEST
76 depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
78 config USB_MUSB_OMAP2PLUS
79 tristate "OMAP2430 and onwards"
80 depends on ARCH_OMAP2PLUS && USB
88 tristate "TI DSPS platforms"
89 select USB_MUSB_AM335X_CHILD
90 depends on ARCH_OMAP2PLUS || COMPILE_TEST
93 config USB_MUSB_BLACKFIN
95 depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
98 tristate "Ux500 platforms"
99 depends on ARCH_U8500 || COMPILE_TEST
101 config USB_MUSB_JZ4740
103 depends on MACH_JZ4740 || COMPILE_TEST
104 depends on USB_MUSB_GADGET
105 depends on USB_OTG_BLACKLIST_HUB
107 config USB_MUSB_AM335X_CHILD
111 prompt 'MUSB DMA mode'
112 default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
113 default USB_UX500_DMA if USB_MUSB_UX500
114 default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
115 default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
116 default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
117 default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
120 Unfortunately, only one option can be enabled here. Ideally one
121 should be able to build all these drivers into one kernel to
122 allow using DMA on multiplatform kernels.
125 bool 'ST Ericsson Ux500'
126 depends on USB_MUSB_UX500
128 Enable DMA transfers on UX500 platforms.
130 config USB_INVENTRA_DMA
132 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
134 Enable DMA transfers using Mentor's engine.
136 config USB_TI_CPPI_DMA
137 bool 'TI CPPI (Davinci)'
138 depends on USB_MUSB_DAVINCI
140 Enable DMA transfers when TI CPPI DMA is available.
142 config USB_TI_CPPI41_DMA
143 bool 'TI CPPI 4.1 (AM335x)'
147 config USB_TUSB_OMAP_DMA
149 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
152 Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
155 bool 'Disable DMA (always use PIO)'
157 All data is copied between memory and FIFO by the CPU.
158 DMA controllers are ignored.
160 Do not choose this unless DMA support for your SOC or board
161 is unavailable (or unstable). When DMA is enabled at compile time,
162 you can still disable it at run time using the "use_dma=n" module
167 endif # USB_MUSB_HDRC