drivers/usb/phy/phy-fsl-usb.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
   4  *
   5  * Author: Li Yang <LeoLi@freescale.com>
   6  *         Jerry Huang <Chang-Ming.Huang@freescale.com>
   7  *
   8  * Initialization based on code from Shlomi Gridish.
   9  */
  10
  11 #include <linux/module.h>
  12 #include <linux/kernel.h>
  13 #include <linux/delay.h>
  14 #include <linux/slab.h>
  15 #include <linux/proc_fs.h>
  16 #include <linux/errno.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/timer.h>
  20 #include <linux/usb.h>
  21 #include <linux/device.h>
  22 #include <linux/usb/ch9.h>
  23 #include <linux/usb/gadget.h>
  24 #include <linux/workqueue.h>
  25 #include <linux/time.h>
  26 #include <linux/fsl_devices.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/uaccess.h>
  29
  30 #include <asm/unaligned.h>
  31
  32 #include "phy-fsl-usb.h"
  33
  34 #ifdef VERBOSE
  35 #define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
  36                                  __func__, ## args)
  37 #else
  38 #define VDBG(stuff...)  do {} while (0)
  39 #endif
  40
  41 #define DRIVER_VERSION "Rev. 1.55"
  42 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
  43 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
  44 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
  45
  46 static const char driver_name[] = "fsl-usb2-otg";
  47
  48 const pm_message_t otg_suspend_state = {
  49         .event = 1,
  50 };
  51
  52 #define HA_DATA_PULSE
  53
  54 static struct usb_dr_mmap *usb_dr_regs;
  55 static struct fsl_otg *fsl_otg_dev;
  56 static int srp_wait_done;
  57
  58 /* FSM timers */
  59 struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
  60         *b_ase0_brst_tmr, *b_se0_srp_tmr;
  61
  62 /* Driver specific timers */
  63 struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
  64         *b_srp_wait_tmr, *a_wait_enum_tmr;
  65
  66 static struct list_head active_timers;
  67
  68 static struct fsl_otg_config fsl_otg_initdata = {
  69         .otg_port = 1,
  70 };
  71
  72 #ifdef CONFIG_PPC32
  73 static u32 _fsl_readl_be(const unsigned __iomem *p)
  74 {
  75         return in_be32(p);
  76 }
  77
  78 static u32 _fsl_readl_le(const unsigned __iomem *p)
  79 {
  80         return in_le32(p);
  81 }
  82
  83 static void _fsl_writel_be(u32 v, unsigned __iomem *p)
  84 {
  85         out_be32(p, v);
  86 }
  87
  88 static void _fsl_writel_le(u32 v, unsigned __iomem *p)
  89 {
  90         out_le32(p, v);
  91 }
  92
  93 static u32 (*_fsl_readl)(const unsigned __iomem *p);
  94 static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
  95
  96 #define fsl_readl(p)            (*_fsl_readl)((p))
  97 #define fsl_writel(v, p)        (*_fsl_writel)((v), (p))
  98
  99 #else
 100 #define fsl_readl(addr)         readl(addr)
 101 #define fsl_writel(val, addr)   writel(val, addr)
 102 #endif /* CONFIG_PPC32 */
 103
 104 int write_ulpi(u8 addr, u8 data)
 105 {
 106         u32 temp;
 107
 108         temp = 0x60000000 | (addr << 16) | data;
 109         fsl_writel(temp, &usb_dr_regs->ulpiview);
 110         return 0;
 111 }
 112
 113 /* -------------------------------------------------------------*/
 114 /* Operations that will be called from OTG Finite State Machine */
 115
 116 /* Charge vbus for vbus pulsing in SRP */
 117 void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 118 {
 119         u32 tmp;
 120
 121         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 122
 123         if (on)
 124                 /* stop discharging, start charging */
 125                 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
 126                         OTGSC_CTRL_VBUS_CHARGE;
 127         else
 128                 /* stop charging */
 129                 tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
 130
 131         fsl_writel(tmp, &usb_dr_regs->otgsc);
 132 }
 133
 134 /* Discharge vbus through a resistor to ground */
 135 void fsl_otg_dischrg_vbus(int on)
 136 {
 137         u32 tmp;
 138
 139         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 140
 141         if (on)
 142                 /* stop charging, start discharging */
 143                 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
 144                         OTGSC_CTRL_VBUS_DISCHARGE;
 145         else
 146                 /* stop discharging */
 147                 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
 148
 149         fsl_writel(tmp, &usb_dr_regs->otgsc);
 150 }
 151
 152 /* A-device driver vbus, controlled through PP bit in PORTSC */
 153 void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 154 {
 155         u32 tmp;
 156
 157         if (on) {
 158                 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
 159                 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
 160         } else {
 161                 tmp = fsl_readl(&usb_dr_regs->portsc) &
 162                       ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
 163                 fsl_writel(tmp, &usb_dr_regs->portsc);
 164         }
 165 }
 166
 167 /*
 168  * Pull-up D+, signalling connect by periperal. Also used in
 169  * data-line pulsing in SRP
 170  */
 171 void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 172 {
 173         u32 tmp;
 174
 175         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 176
 177         if (on)
 178                 tmp |= OTGSC_CTRL_DATA_PULSING;
 179         else
 180                 tmp &= ~OTGSC_CTRL_DATA_PULSING;
 181
 182         fsl_writel(tmp, &usb_dr_regs->otgsc);
 183 }
 184
 185 /*
 186  * Generate SOF by host.  This is controlled through suspend/resume the
 187  * port.  In host mode, controller will automatically send SOF.
 188  * Suspend will block the data on the port.
 189  */
 190 void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 191 {
 192         u32 tmp;
 193
 194         tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
 195         if (on)
 196                 tmp |= PORTSC_PORT_FORCE_RESUME;
 197         else
 198                 tmp |= PORTSC_PORT_SUSPEND;
 199
 200         fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
 201
 202 }
 203
 204 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
 205 void fsl_otg_start_pulse(struct otg_fsm *fsm)
 206 {
 207         u32 tmp;
 208
 209         srp_wait_done = 0;
 210 #ifdef HA_DATA_PULSE
 211         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 212         tmp |= OTGSC_HA_DATA_PULSE;
 213         fsl_writel(tmp, &usb_dr_regs->otgsc);
 214 #else
 215         fsl_otg_loc_conn(1);
 216 #endif
 217
 218         fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 219 }
 220
 221 void b_data_pulse_end(unsigned long foo)
 222 {
 223 #ifdef HA_DATA_PULSE
 224 #else
 225         fsl_otg_loc_conn(0);
 226 #endif
 227
 228         /* Do VBUS pulse after data pulse */
 229         fsl_otg_pulse_vbus();
 230 }
 231
 232 void fsl_otg_pulse_vbus(void)
 233 {
 234         srp_wait_done = 0;
 235         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 236         /* start the timer to end vbus charge */
 237         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 238 }
 239
 240 void b_vbus_pulse_end(unsigned long foo)
 241 {
 242         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 243
 244         /*
 245          * As USB3300 using the same a_sess_vld and b_sess_vld voltage
 246          * we need to discharge the bus for a while to distinguish
 247          * residual voltage of vbus pulsing and A device pull up
 248          */
 249         fsl_otg_dischrg_vbus(1);
 250         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 251 }
 252
 253 void b_srp_end(unsigned long foo)
 254 {
 255         fsl_otg_dischrg_vbus(0);
 256         srp_wait_done = 1;
 257
 258         if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
 259             fsl_otg_dev->fsm.b_sess_vld)
 260                 fsl_otg_dev->fsm.b_srp_done = 1;
 261 }
 262
 263 /*
 264  * Workaround for a_host suspending too fast.  When a_bus_req=0,
 265  * a_host will start by SRP.  It needs to set b_hnp_enable before
 266  * actually suspending to start HNP
 267  */
 268 void a_wait_enum(unsigned long foo)
 269 {
 270         VDBG("a_wait_enum timeout\n");
 271         if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
 272                 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 273         else
 274                 otg_statemachine(&fsl_otg_dev->fsm);
 275 }
 276
 277 /* The timeout callback function to set time out bit */
 278 void set_tmout(unsigned long indicator)
 279 {
 280         *(int *)indicator = 1;
 281 }
 282
 283 /* Initialize timers */
 284 int fsl_otg_init_timers(struct otg_fsm *fsm)
 285 {
 286         /* FSM used timers */
 287         a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
 288                                 (unsigned long)&fsm->a_wait_vrise_tmout);
 289         if (!a_wait_vrise_tmr)
 290                 return -ENOMEM;
 291
 292         a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
 293                                 (unsigned long)&fsm->a_wait_bcon_tmout);
 294         if (!a_wait_bcon_tmr)
 295                 return -ENOMEM;
 296
 297         a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
 298                                 (unsigned long)&fsm->a_aidl_bdis_tmout);
 299         if (!a_aidl_bdis_tmr)
 300                 return -ENOMEM;
 301
 302         b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
 303                                 (unsigned long)&fsm->b_ase0_brst_tmout);
 304         if (!b_ase0_brst_tmr)
 305                 return -ENOMEM;
 306
 307         b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
 308                                 (unsigned long)&fsm->b_se0_srp);
 309         if (!b_se0_srp_tmr)
 310                 return -ENOMEM;
 311
 312         b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
 313                                 (unsigned long)&fsm->b_srp_done);
 314         if (!b_srp_fail_tmr)
 315                 return -ENOMEM;
 316
 317         a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
 318                                 (unsigned long)&fsm);
 319         if (!a_wait_enum_tmr)
 320                 return -ENOMEM;
 321
 322         /* device driver used timers */
 323         b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
 324         if (!b_srp_wait_tmr)
 325                 return -ENOMEM;
 326
 327         b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
 328                                 TB_DATA_PLS, 0);
 329         if (!b_data_pulse_tmr)
 330                 return -ENOMEM;
 331
 332         b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
 333                                 TB_VBUS_PLS, 0);
 334         if (!b_vbus_pulse_tmr)
 335                 return -ENOMEM;
 336
 337         return 0;
 338 }
 339
 340 /* Uninitialize timers */
 341 void fsl_otg_uninit_timers(void)
 342 {
 343         /* FSM used timers */
 344         kfree(a_wait_vrise_tmr);
 345         kfree(a_wait_bcon_tmr);
 346         kfree(a_aidl_bdis_tmr);
 347         kfree(b_ase0_brst_tmr);
 348         kfree(b_se0_srp_tmr);
 349         kfree(b_srp_fail_tmr);
 350         kfree(a_wait_enum_tmr);
 351
 352         /* device driver used timers */
 353         kfree(b_srp_wait_tmr);
 354         kfree(b_data_pulse_tmr);
 355         kfree(b_vbus_pulse_tmr);
 356 }
 357
 358 static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
 359 {
 360         struct fsl_otg_timer *timer;
 361
 362         /* REVISIT: use array of pointers to timers instead */
 363         switch (t) {
 364         case A_WAIT_VRISE:
 365                 timer = a_wait_vrise_tmr;
 366                 break;
 367         case A_WAIT_BCON:
 368                 timer = a_wait_vrise_tmr;
 369                 break;
 370         case A_AIDL_BDIS:
 371                 timer = a_wait_vrise_tmr;
 372                 break;
 373         case B_ASE0_BRST:
 374                 timer = a_wait_vrise_tmr;
 375                 break;
 376         case B_SE0_SRP:
 377                 timer = a_wait_vrise_tmr;
 378                 break;
 379         case B_SRP_FAIL:
 380                 timer = a_wait_vrise_tmr;
 381                 break;
 382         case A_WAIT_ENUM:
 383                 timer = a_wait_vrise_tmr;
 384                 break;
 385         default:
 386                 timer = NULL;
 387         }
 388
 389         return timer;
 390 }
 391
 392 /* Add timer to timer list */
 393 void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 394 {
 395         struct fsl_otg_timer *timer = gtimer;
 396         struct fsl_otg_timer *tmp_timer;
 397
 398         /*
 399          * Check if the timer is already in the active list,
 400          * if so update timer count
 401          */
 402         list_for_each_entry(tmp_timer, &active_timers, list)
 403             if (tmp_timer == timer) {
 404                 timer->count = timer->expires;
 405                 return;
 406         }
 407         timer->count = timer->expires;
 408         list_add_tail(&timer->list, &active_timers);
 409 }
 410
 411 static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 412 {
 413         struct fsl_otg_timer *timer;
 414
 415         timer = fsl_otg_get_timer(t);
 416         if (!timer)
 417                 return;
 418
 419         fsl_otg_add_timer(fsm, timer);
 420 }
 421
 422 /* Remove timer from the timer list; clear timeout status */
 423 void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 424 {
 425         struct fsl_otg_timer *timer = gtimer;
 426         struct fsl_otg_timer *tmp_timer, *del_tmp;
 427
 428         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
 429                 if (tmp_timer == timer)
 430                         list_del(&timer->list);
 431 }
 432
 433 static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 434 {
 435         struct fsl_otg_timer *timer;
 436
 437         timer = fsl_otg_get_timer(t);
 438         if (!timer)
 439                 return;
 440
 441         fsl_otg_del_timer(fsm, timer);
 442 }
 443
 444 /* Reset controller, not reset the bus */
 445 void otg_reset_controller(void)
 446 {
 447         u32 command;
 448
 449         command = fsl_readl(&usb_dr_regs->usbcmd);
 450         command |= (1 << 1);
 451         fsl_writel(command, &usb_dr_regs->usbcmd);
 452         while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
 453                 ;
 454 }
 455
 456 /* Call suspend/resume routines in host driver */
 457 int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 458 {
 459         struct usb_otg *otg = fsm->otg;
 460         struct device *dev;
 461         struct fsl_otg *otg_dev =
 462                 container_of(otg->usb_phy, struct fsl_otg, phy);
 463         u32 retval = 0;
 464
 465         if (!otg->host)
 466                 return -ENODEV;
 467         dev = otg->host->controller;
 468
 469         /*
 470          * Update a_vbus_vld state as a_vbus_vld int is disabled
 471          * in device mode
 472          */
 473         fsm->a_vbus_vld =
 474                 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
 475         if (on) {
 476                 /* start fsl usb host controller */
 477                 if (otg_dev->host_working)
 478                         goto end;
 479                 else {
 480                         otg_reset_controller();
 481                         VDBG("host on......\n");
 482                         if (dev->driver->pm && dev->driver->pm->resume) {
 483                                 retval = dev->driver->pm->resume(dev);
 484                                 if (fsm->id) {
 485                                         /* default-b */
 486                                         fsl_otg_drv_vbus(fsm, 1);
 487                                         /*
 488                                          * Workaround: b_host can't driver
 489                                          * vbus, but PP in PORTSC needs to
 490                                          * be 1 for host to work.
 491                                          * So we set drv_vbus bit in
 492                                          * transceiver to 0 thru ULPI.
 493                                          */
 494                                         write_ulpi(0x0c, 0x20);
 495                                 }
 496                         }
 497
 498                         otg_dev->host_working = 1;
 499                 }
 500         } else {
 501                 /* stop fsl usb host controller */
 502                 if (!otg_dev->host_working)
 503                         goto end;
 504                 else {
 505                         VDBG("host off......\n");
 506                         if (dev && dev->driver) {
 507                                 if (dev->driver->pm && dev->driver->pm->suspend)
 508                                         retval = dev->driver->pm->suspend(dev);
 509                                 if (fsm->id)
 510                                         /* default-b */
 511                                         fsl_otg_drv_vbus(fsm, 0);
 512                         }
 513                         otg_dev->host_working = 0;
 514                 }
 515         }
 516 end:
 517         return retval;
 518 }
 519
 520 /*
 521  * Call suspend and resume function in udc driver
 522  * to stop and start udc driver.
 523  */
 524 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
 525 {
 526         struct usb_otg *otg = fsm->otg;
 527         struct device *dev;
 528
 529         if (!otg->gadget || !otg->gadget->dev.parent)
 530                 return -ENODEV;
 531
 532         VDBG("gadget %s\n", on ? "on" : "off");
 533         dev = otg->gadget->dev.parent;
 534
 535         if (on) {
 536                 if (dev->driver->resume)
 537                         dev->driver->resume(dev);
 538         } else {
 539                 if (dev->driver->suspend)
 540                         dev->driver->suspend(dev, otg_suspend_state);
 541         }
 542
 543         return 0;
 544 }
 545
 546 /*
 547  * Called by initialization code of host driver.  Register host controller
 548  * to the OTG.  Suspend host for OTG role detection.
 549  */
 550 static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 551 {
 552         struct fsl_otg *otg_dev;
 553
 554         if (!otg)
 555                 return -ENODEV;
 556
 557         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 558         if (otg_dev != fsl_otg_dev)
 559                 return -ENODEV;
 560
 561         otg->host = host;
 562
 563         otg_dev->fsm.a_bus_drop = 0;
 564         otg_dev->fsm.a_bus_req = 1;
 565
 566         if (host) {
 567                 VDBG("host off......\n");
 568
 569                 otg->host->otg_port = fsl_otg_initdata.otg_port;
 570                 otg->host->is_b_host = otg_dev->fsm.id;
 571                 /*
 572                  * must leave time for hub_wq to finish its thing
 573                  * before yanking the host driver out from under it,
 574                  * so suspend the host after a short delay.
 575                  */
 576                 otg_dev->host_working = 1;
 577                 schedule_delayed_work(&otg_dev->otg_event, 100);
 578                 return 0;
 579         } else {
 580                 /* host driver going away */
 581                 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
 582                       OTGSC_STS_USB_ID)) {
 583                         /* Mini-A cable connected */
 584                         struct otg_fsm *fsm = &otg_dev->fsm;
 585
 586                         otg->state = OTG_STATE_UNDEFINED;
 587                         fsm->protocol = PROTO_UNDEF;
 588                 }
 589         }
 590
 591         otg_dev->host_working = 0;
 592
 593         otg_statemachine(&otg_dev->fsm);
 594
 595         return 0;
 596 }
 597
 598 /* Called by initialization code of udc.  Register udc to OTG. */
 599 static int fsl_otg_set_peripheral(struct usb_otg *otg,
 600                                         struct usb_gadget *gadget)
 601 {
 602         struct fsl_otg *otg_dev;
 603
 604         if (!otg)
 605                 return -ENODEV;
 606
 607         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 608         VDBG("otg_dev 0x%x\n", (int)otg_dev);
 609         VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
 610         if (otg_dev != fsl_otg_dev)
 611                 return -ENODEV;
 612
 613         if (!gadget) {
 614                 if (!otg->default_a)
 615                         otg->gadget->ops->vbus_draw(otg->gadget, 0);
 616                 usb_gadget_vbus_disconnect(otg->gadget);
 617                 otg->gadget = 0;
 618                 otg_dev->fsm.b_bus_req = 0;
 619                 otg_statemachine(&otg_dev->fsm);
 620                 return 0;
 621         }
 622
 623         otg->gadget = gadget;
 624         otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
 625
 626         otg_dev->fsm.b_bus_req = 1;
 627
 628         /* start the gadget right away if the ID pin says Mini-B */
 629         pr_debug("ID pin=%d\n", otg_dev->fsm.id);
 630         if (otg_dev->fsm.id == 1) {
 631                 fsl_otg_start_host(&otg_dev->fsm, 0);
 632                 otg_drv_vbus(&otg_dev->fsm, 0);
 633                 fsl_otg_start_gadget(&otg_dev->fsm, 1);
 634         }
 635
 636         return 0;
 637 }
 638
 639 /*
 640  * Delayed pin detect interrupt processing.
 641  *
 642  * When the Mini-A cable is disconnected from the board,
 643  * the pin-detect interrupt happens before the disconnect
 644  * interrupts for the connected device(s).  In order to
 645  * process the disconnect interrupt(s) prior to switching
 646  * roles, the pin-detect interrupts are delayed, and handled
 647  * by this routine.
 648  */
 649 static void fsl_otg_event(struct work_struct *work)
 650 {
 651         struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
 652         struct otg_fsm *fsm = &og->fsm;
 653
 654         if (fsm->id) {          /* switch to gadget */
 655                 fsl_otg_start_host(fsm, 0);
 656                 otg_drv_vbus(fsm, 0);
 657                 fsl_otg_start_gadget(fsm, 1);
 658         }
 659 }
 660
 661 /* B-device start SRP */
 662 static int fsl_otg_start_srp(struct usb_otg *otg)
 663 {
 664         struct fsl_otg *otg_dev;
 665
 666         if (!otg || otg->state != OTG_STATE_B_IDLE)
 667                 return -ENODEV;
 668
 669         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 670         if (otg_dev != fsl_otg_dev)
 671                 return -ENODEV;
 672
 673         otg_dev->fsm.b_bus_req = 1;
 674         otg_statemachine(&otg_dev->fsm);
 675
 676         return 0;
 677 }
 678
 679 /* A_host suspend will call this function to start hnp */
 680 static int fsl_otg_start_hnp(struct usb_otg *otg)
 681 {
 682         struct fsl_otg *otg_dev;
 683
 684         if (!otg)
 685                 return -ENODEV;
 686
 687         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 688         if (otg_dev != fsl_otg_dev)
 689                 return -ENODEV;
 690
 691         pr_debug("start_hnp...\n");
 692
 693         /* clear a_bus_req to enter a_suspend state */
 694         otg_dev->fsm.a_bus_req = 0;
 695         otg_statemachine(&otg_dev->fsm);
 696
 697         return 0;
 698 }
 699
 700 /*
 701  * Interrupt handler.  OTG/host/peripheral share the same int line.
 702  * OTG driver clears OTGSC interrupts and leaves USB interrupts
 703  * intact.  It needs to have knowledge of some USB interrupts
 704  * such as port change.
 705  */
 706 irqreturn_t fsl_otg_isr(int irq, void *dev_id)
 707 {
 708         struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
 709         struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
 710         u32 otg_int_src, otg_sc;
 711
 712         otg_sc = fsl_readl(&usb_dr_regs->otgsc);
 713         otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
 714
 715         /* Only clear otg interrupts */
 716         fsl_writel(otg_sc, &usb_dr_regs->otgsc);
 717
 718         /*FIXME: ID change not generate when init to 0 */
 719         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 720         otg->default_a = (fsm->id == 0);
 721
 722         /* process OTG interrupts */
 723         if (otg_int_src) {
 724                 if (otg_int_src & OTGSC_INTSTS_USB_ID) {
 725                         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 726                         otg->default_a = (fsm->id == 0);
 727                         /* clear conn information */
 728                         if (fsm->id)
 729                                 fsm->b_conn = 0;
 730                         else
 731                                 fsm->a_conn = 0;
 732
 733                         if (otg->host)
 734                                 otg->host->is_b_host = fsm->id;
 735                         if (otg->gadget)
 736                                 otg->gadget->is_a_peripheral = !fsm->id;
 737                         VDBG("ID int (ID is %d)\n", fsm->id);
 738
 739                         if (fsm->id) {  /* switch to gadget */
 740                                 schedule_delayed_work(
 741                                         &((struct fsl_otg *)dev_id)->otg_event,
 742                                         100);
 743                         } else {        /* switch to host */
 744                                 cancel_delayed_work(&
 745                                                     ((struct fsl_otg *)dev_id)->
 746                                                     otg_event);
 747                                 fsl_otg_start_gadget(fsm, 0);
 748                                 otg_drv_vbus(fsm, 1);
 749                                 fsl_otg_start_host(fsm, 1);
 750                         }
 751                         return IRQ_HANDLED;
 752                 }
 753         }
 754         return IRQ_NONE;
 755 }
 756
 757 static struct otg_fsm_ops fsl_otg_ops = {
 758         .chrg_vbus = fsl_otg_chrg_vbus,
 759         .drv_vbus = fsl_otg_drv_vbus,
 760         .loc_conn = fsl_otg_loc_conn,
 761         .loc_sof = fsl_otg_loc_sof,
 762         .start_pulse = fsl_otg_start_pulse,
 763
 764         .add_timer = fsl_otg_fsm_add_timer,
 765         .del_timer = fsl_otg_fsm_del_timer,
 766
 767         .start_host = fsl_otg_start_host,
 768         .start_gadget = fsl_otg_start_gadget,
 769 };
 770
 771 /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
 772 static int fsl_otg_conf(struct platform_device *pdev)
 773 {
 774         struct fsl_otg *fsl_otg_tc;
 775         int status;
 776
 777         if (fsl_otg_dev)
 778                 return 0;
 779
 780         /* allocate space to fsl otg device */
 781         fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
 782         if (!fsl_otg_tc)
 783                 return -ENOMEM;
 784
 785         fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
 786         if (!fsl_otg_tc->phy.otg) {
 787                 kfree(fsl_otg_tc);
 788                 return -ENOMEM;
 789         }
 790
 791         INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
 792
 793         INIT_LIST_HEAD(&active_timers);
 794         status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
 795         if (status) {
 796                 pr_info("Couldn't init OTG timers\n");
 797                 goto err;
 798         }
 799         mutex_init(&fsl_otg_tc->fsm.lock);
 800
 801         /* Set OTG state machine operations */
 802         fsl_otg_tc->fsm.ops = &fsl_otg_ops;
 803
 804         /* initialize the otg structure */
 805         fsl_otg_tc->phy.label = DRIVER_DESC;
 806         fsl_otg_tc->phy.dev = &pdev->dev;
 807
 808         fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
 809         fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
 810         fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
 811         fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
 812         fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
 813
 814         fsl_otg_dev = fsl_otg_tc;
 815
 816         /* Store the otg transceiver */
 817         status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
 818         if (status) {
 819                 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
 820                 goto err;
 821         }
 822
 823         return 0;
 824 err:
 825         fsl_otg_uninit_timers();
 826         kfree(fsl_otg_tc->phy.otg);
 827         kfree(fsl_otg_tc);
 828         return status;
 829 }
 830
 831 /* OTG Initialization */
 832 int usb_otg_start(struct platform_device *pdev)
 833 {
 834         struct fsl_otg *p_otg;
 835         struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
 836         struct otg_fsm *fsm;
 837         int status;
 838         struct resource *res;
 839         u32 temp;
 840         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 841
 842         p_otg = container_of(otg_trans, struct fsl_otg, phy);
 843         fsm = &p_otg->fsm;
 844
 845         /* Initialize the state machine structure with default values */
 846         SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
 847         fsm->otg = p_otg->phy.otg;
 848
 849         /* We don't require predefined MEM/IRQ resource index */
 850         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 851         if (!res)
 852                 return -ENXIO;
 853
 854         /* We don't request_mem_region here to enable resource sharing
 855          * with host/device */
 856
 857         usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
 858         p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
 859         pdata->regs = (void *)usb_dr_regs;
 860
 861         if (pdata->init && pdata->init(pdev) != 0)
 862                 return -EINVAL;
 863
 864         if (pdata->big_endian_mmio) {
 865                 _fsl_readl = _fsl_readl_be;
 866                 _fsl_writel = _fsl_writel_be;
 867         } else {
 868                 _fsl_readl = _fsl_readl_le;
 869                 _fsl_writel = _fsl_writel_le;
 870         }
 871
 872         /* request irq */
 873         p_otg->irq = platform_get_irq(pdev, 0);
 874         status = request_irq(p_otg->irq, fsl_otg_isr,
 875                                 IRQF_SHARED, driver_name, p_otg);
 876         if (status) {
 877                 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
 878                         p_otg->irq, status);
 879                 iounmap(p_otg->dr_mem_map);
 880                 kfree(p_otg->phy.otg);
 881                 kfree(p_otg);
 882                 return status;
 883         }
 884
 885         /* stop the controller */
 886         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 887         temp &= ~USB_CMD_RUN_STOP;
 888         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 889
 890         /* reset the controller */
 891         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 892         temp |= USB_CMD_CTRL_RESET;
 893         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 894
 895         /* wait reset completed */
 896         while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
 897                 ;
 898
 899         /* configure the VBUSHS as IDLE(both host and device) */
 900         temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
 901         fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
 902
 903         /* configure PHY interface */
 904         temp = fsl_readl(&p_otg->dr_mem_map->portsc);
 905         temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
 906         switch (pdata->phy_mode) {
 907         case FSL_USB2_PHY_ULPI:
 908                 temp |= PORTSC_PTS_ULPI;
 909                 break;
 910         case FSL_USB2_PHY_UTMI_WIDE:
 911                 temp |= PORTSC_PTW_16BIT;
 912                 /* fall through */
 913         case FSL_USB2_PHY_UTMI:
 914                 temp |= PORTSC_PTS_UTMI;
 915                 /* fall through */
 916         default:
 917                 break;
 918         }
 919         fsl_writel(temp, &p_otg->dr_mem_map->portsc);
 920
 921         if (pdata->have_sysif_regs) {
 922                 /* configure control enable IO output, big endian register */
 923                 temp = __raw_readl(&p_otg->dr_mem_map->control);
 924                 temp |= USB_CTRL_IOENB;
 925                 __raw_writel(temp, &p_otg->dr_mem_map->control);
 926         }
 927
 928         /* disable all interrupt and clear all OTGSC status */
 929         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 930         temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
 931         temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
 932         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 933
 934         /*
 935          * The identification (id) input is FALSE when a Mini-A plug is inserted
 936          * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
 937          * Also: record initial state of ID pin
 938          */
 939         if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
 940                 p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
 941                 p_otg->fsm.id = 1;
 942         } else {
 943                 p_otg->phy.otg->state = OTG_STATE_A_IDLE;
 944                 p_otg->fsm.id = 0;
 945         }
 946
 947         pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
 948
 949         /* enable OTG ID pin interrupt */
 950         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 951         temp |= OTGSC_INTR_USB_ID_EN;
 952         temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
 953         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 954
 955         return 0;
 956 }
 957
 958 /*
 959  * state file in sysfs
 960  */
 961 static int show_fsl_usb2_otg_state(struct device *dev,
 962                                    struct device_attribute *attr, char *buf)
 963 {
 964         struct otg_fsm *fsm = &fsl_otg_dev->fsm;
 965         char *next = buf;
 966         unsigned size = PAGE_SIZE;
 967         int t;
 968
 969         mutex_lock(&fsm->lock);
 970
 971         /* basic driver infomation */
 972         t = scnprintf(next, size,
 973                         DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
 974                         DRIVER_VERSION);
 975         size -= t;
 976         next += t;
 977
 978         /* Registers */
 979         t = scnprintf(next, size,
 980                         "OTGSC:   0x%08x\n"
 981                         "PORTSC:  0x%08x\n"
 982                         "USBMODE: 0x%08x\n"
 983                         "USBCMD:  0x%08x\n"
 984                         "USBSTS:  0x%08x\n"
 985                         "USBINTR: 0x%08x\n",
 986                         fsl_readl(&usb_dr_regs->otgsc),
 987                         fsl_readl(&usb_dr_regs->portsc),
 988                         fsl_readl(&usb_dr_regs->usbmode),
 989                         fsl_readl(&usb_dr_regs->usbcmd),
 990                         fsl_readl(&usb_dr_regs->usbsts),
 991                         fsl_readl(&usb_dr_regs->usbintr));
 992         size -= t;
 993         next += t;
 994
 995         /* State */
 996         t = scnprintf(next, size,
 997                       "OTG state: %s\n\n",
 998                       usb_otg_state_string(fsl_otg_dev->phy.otg->state));
 999         size -= t;
1000         next += t;
1001
1002         /* State Machine Variables */
1003         t = scnprintf(next, size,
1004                         "a_bus_req: %d\n"
1005                         "b_bus_req: %d\n"
1006                         "a_bus_resume: %d\n"
1007                         "a_bus_suspend: %d\n"
1008                         "a_conn: %d\n"
1009                         "a_sess_vld: %d\n"
1010                         "a_srp_det: %d\n"
1011                         "a_vbus_vld: %d\n"
1012                         "b_bus_resume: %d\n"
1013                         "b_bus_suspend: %d\n"
1014                         "b_conn: %d\n"
1015                         "b_se0_srp: %d\n"
1016                         "b_ssend_srp: %d\n"
1017                         "b_sess_vld: %d\n"
1018                         "id: %d\n",
1019                         fsm->a_bus_req,
1020                         fsm->b_bus_req,
1021                         fsm->a_bus_resume,
1022                         fsm->a_bus_suspend,
1023                         fsm->a_conn,
1024                         fsm->a_sess_vld,
1025                         fsm->a_srp_det,
1026                         fsm->a_vbus_vld,
1027                         fsm->b_bus_resume,
1028                         fsm->b_bus_suspend,
1029                         fsm->b_conn,
1030                         fsm->b_se0_srp,
1031                         fsm->b_ssend_srp,
1032                         fsm->b_sess_vld,
1033                         fsm->id);
1034         size -= t;
1035         next += t;
1036
1037         mutex_unlock(&fsm->lock);
1038
1039         return PAGE_SIZE - size;
1040 }
1041
1042 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
1043
1044
1045 /* Char driver interface to control some OTG input */
1046
1047 /*
1048  * Handle some ioctl command, such as get otg
1049  * status and set host suspend
1050  */
1051 static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
1052                           unsigned long arg)
1053 {
1054         u32 retval = 0;
1055
1056         switch (cmd) {
1057         case GET_OTG_STATUS:
1058                 retval = fsl_otg_dev->host_working;
1059                 break;
1060
1061         case SET_A_SUSPEND_REQ:
1062                 fsl_otg_dev->fsm.a_suspend_req_inf = arg;
1063                 break;
1064
1065         case SET_A_BUS_DROP:
1066                 fsl_otg_dev->fsm.a_bus_drop = arg;
1067                 break;
1068
1069         case SET_A_BUS_REQ:
1070                 fsl_otg_dev->fsm.a_bus_req = arg;
1071                 break;
1072
1073         case SET_B_BUS_REQ:
1074                 fsl_otg_dev->fsm.b_bus_req = arg;
1075                 break;
1076
1077         default:
1078                 break;
1079         }
1080
1081         otg_statemachine(&fsl_otg_dev->fsm);
1082
1083         return retval;
1084 }
1085
1086 static int fsl_otg_open(struct inode *inode, struct file *file)
1087 {
1088         return 0;
1089 }
1090
1091 static int fsl_otg_release(struct inode *inode, struct file *file)
1092 {
1093         return 0;
1094 }
1095
1096 static const struct file_operations otg_fops = {
1097         .owner = THIS_MODULE,
1098         .llseek = NULL,
1099         .read = NULL,
1100         .write = NULL,
1101         .unlocked_ioctl = fsl_otg_ioctl,
1102         .open = fsl_otg_open,
1103         .release = fsl_otg_release,
1104 };
1105
1106 static int fsl_otg_probe(struct platform_device *pdev)
1107 {
1108         int ret;
1109
1110         if (!dev_get_platdata(&pdev->dev))
1111                 return -ENODEV;
1112
1113         /* configure the OTG */
1114         ret = fsl_otg_conf(pdev);
1115         if (ret) {
1116                 dev_err(&pdev->dev, "Couldn't configure OTG module\n");
1117                 return ret;
1118         }
1119
1120         /* start OTG */
1121         ret = usb_otg_start(pdev);
1122         if (ret) {
1123                 dev_err(&pdev->dev, "Can't init FSL OTG device\n");
1124                 return ret;
1125         }
1126
1127         ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
1128         if (ret) {
1129                 dev_err(&pdev->dev, "unable to register FSL OTG device\n");
1130                 return ret;
1131         }
1132
1133         ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1134         if (ret)
1135                 dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
1136
1137         return ret;
1138 }
1139
1140 static int fsl_otg_remove(struct platform_device *pdev)
1141 {
1142         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
1143
1144         usb_remove_phy(&fsl_otg_dev->phy);
1145         free_irq(fsl_otg_dev->irq, fsl_otg_dev);
1146
1147         iounmap((void *)usb_dr_regs);
1148
1149         fsl_otg_uninit_timers();
1150         kfree(fsl_otg_dev->phy.otg);
1151         kfree(fsl_otg_dev);
1152
1153         device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1154
1155         unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
1156
1157         if (pdata->exit)
1158                 pdata->exit(pdev);
1159
1160         return 0;
1161 }
1162
1163 struct platform_driver fsl_otg_driver = {
1164         .probe = fsl_otg_probe,
1165         .remove = fsl_otg_remove,
1166         .driver = {
1167                 .name = driver_name,
1168                 .owner = THIS_MODULE,
1169         },
1170 };
1171
1172 module_platform_driver(fsl_otg_driver);
1173
1174 MODULE_DESCRIPTION(DRIVER_INFO);
1175 MODULE_AUTHOR(DRIVER_AUTHOR);
1176 MODULE_LICENSE("GPL");