drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menuconfig USB_SERIAL
   6         tristate "USB Serial Converter support"
   7         depends on TTY
   8         ---help---
   9           Say Y here if you have a USB device that provides normal serial
  10           ports, or acts like a serial device, and you want to connect it to
  11           your USB bus.
  12
  13           Please read <file:Documentation/usb/usb-serial.txt> for more
  14           information on the specifics of the different devices that are
  15           supported, and on how to use them.
  16
  17           To compile this driver as a module, choose M here: the
  18           module will be called usbserial.
  19
  20 if USB_SERIAL
  21
  22 config USB_SERIAL_CONSOLE
  23         bool "USB Serial Console device support"
  24         depends on USB_SERIAL=y
  25         ---help---
  26           If you say Y here, it will be possible to use a USB to serial
  27           converter port as the system console (the system console is the
  28           device which receives all kernel messages and warnings and which
  29           allows logins in single user mode). This could be useful if some
  30           terminal or printer is connected to that serial port.
  31
  32           Even if you say Y here, the currently visible virtual console
  33           (/dev/tty0) will still be used as the system console by default, but
  34           you can alter that using a kernel command line option such as
  35           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  36           your boot loader (lilo or loadlin) about how to pass options to the
  37           kernel at boot time.)
  38
  39           If you don't have a VGA card installed and you say Y here, the
  40           kernel will automatically use the first USB to serial converter
  41           port, /dev/ttyUSB0, as system console.
  42
  43           If unsure, say N.
  44
  45 config USB_SERIAL_GENERIC
  46         bool "USB Generic Serial Driver"
  47         help
  48           Say Y here if you want to use the generic USB serial driver.  Please
  49           read <file:Documentation/usb/usb-serial.txt> for more information on
  50           using this driver.  It is recommended that the "USB Serial converter
  51           support" be compiled as a module for this driver to be used
  52           properly.
  53
  54 config USB_SERIAL_SIMPLE
  55         tristate "USB Serial Simple Driver"
  56         help
  57           Say Y here to use the USB serial "simple" driver.  This driver
  58           handles a wide range of very simple devices, all in one
  59           driver.  Specifically, it supports:
  60                 - Suunto ANT+ USB device.
  61                 - Medtronic CareLink USB device
  62                 - Fundamental Software dongle.
  63                 - Google USB serial devices
  64                 - HP4x calculators
  65                 - a number of Motorola phones
  66                 - Novatel Wireless GPS receivers
  67                 - Siemens USB/MPI adapter.
  68                 - ViVOtech ViVOpay USB device.
  69                 - Infineon Modem Flashloader USB interface
  70                 - ZIO Motherboard USB serial interface
  71
  72           To compile this driver as a module, choose M here: the module
  73           will be called usb-serial-simple.
  74
  75 config USB_SERIAL_AIRCABLE
  76         tristate "USB AIRcable Bluetooth Dongle Driver"
  77         help
  78             Say Y here if you want to use USB AIRcable Bluetooth Dongle.
  79
  80             To compile this driver as a module, choose M here: the module
  81             will be called aircable.
  82
  83 config USB_SERIAL_ARK3116
  84         tristate "USB ARK Micro 3116 USB Serial Driver"
  85         help
  86           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  87           device.
  88
  89           To compile this driver as a module, choose M here: the
  90           module will be called ark3116
  91
  92 config USB_SERIAL_BELKIN
  93         tristate "USB Belkin and Peracom Single Port Serial Driver"
  94         help
  95           Say Y here if you want to use a Belkin USB Serial single port
  96           adaptor (F5U103 is one of the model numbers) or the Peracom single
  97           port USB to serial adapter.
  98
  99           To compile this driver as a module, choose M here: the
 100           module will be called belkin_sa.
 101
 102 config USB_SERIAL_CH341
 103         tristate "USB Winchiphead CH341 Single Port Serial Driver"
 104         help
 105           Say Y here if you want to use a Winchiphead CH341 single port
 106           USB to serial adapter.
 107
 108           To compile this driver as a module, choose M here: the
 109           module will be called ch341.
 110
 111 config USB_SERIAL_WHITEHEAT
 112         tristate "USB ConnectTech WhiteHEAT Serial Driver"
 113         select USB_EZUSB_FX2
 114         help
 115           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 116           USB to serial converter device.
 117
 118           To compile this driver as a module, choose M here: the
 119           module will be called whiteheat.
 120
 121 config USB_SERIAL_DIGI_ACCELEPORT
 122         tristate "USB Digi International AccelePort USB Serial Driver"
 123         ---help---
 124           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 125           2 port (plus parallel port) and 4 port USB serial converters.  The
 126           parallel port on the USB 2 appears as a third serial port on Linux.
 127           The Digi Acceleport USB 8 is not yet supported by this driver.
 128
 129           This driver works under SMP with the usb-uhci driver.  It does not
 130           work under SMP with the uhci driver.
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called digi_acceleport.
 134
 135 config USB_SERIAL_CP210X
 136         tristate "USB CP210x family of UART Bridge Controllers"
 137         help
 138           Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
 139           to RS232 converters.
 140
 141           To compile this driver as a module, choose M here: the
 142           module will be called cp210x.
 143
 144 config USB_SERIAL_CYPRESS_M8
 145         tristate "USB Cypress M8 USB Serial Driver"
 146         help
 147           Say Y here if you want to use a device that contains the Cypress
 148           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 149
 150                 Attempted SMP support... send bug reports!
 151
 152           Supported microcontrollers in the CY4601 family are:
 153                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 154
 155           To compile this driver as a module, choose M here: the
 156           module will be called cypress_m8.
 157
 158 config USB_SERIAL_EMPEG
 159         tristate "USB Empeg empeg-car Mark I/II Driver"
 160         help
 161           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 162           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 163           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 164           tidbits of information.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called empeg.
 168
 169 config USB_SERIAL_FTDI_SIO
 170         tristate "USB FTDI Single Port Serial Driver"
 171         ---help---
 172           Say Y here if you want to use a FTDI SIO single port USB to serial
 173           converter device. The implementation I have is called the USC-1000.
 174           This driver has also been tested with the 245 and 232 devices.
 175
 176           See <http://ftdi-usb-sio.sourceforge.net/> for more
 177           information on this driver and the device.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called ftdi_sio.
 181
 182 config USB_SERIAL_VISOR
 183         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 184         help
 185           Say Y here if you want to connect to your HandSpring Visor, Palm
 186           m500 or m505 through its USB docking station. See
 187           <http://usbvisor.sourceforge.net/index.php3> for more information on using this
 188           driver.
 189
 190           To compile this driver as a module, choose M here: the
 191           module will be called visor.
 192
 193 config USB_SERIAL_IPAQ
 194         tristate "USB PocketPC PDA Driver"
 195         help
 196           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 197           or any other PDA running Windows CE 3.0 or PocketPC 2002
 198           using a USB cradle/cable. For information on using the driver,
 199           read <file:Documentation/usb/usb-serial.txt>.
 200
 201           To compile this driver as a module, choose M here: the
 202           module will be called ipaq.
 203
 204 config USB_SERIAL_IR
 205         tristate "USB IR Dongle Serial Driver"
 206         help
 207           Say Y here if you want to enable simple serial support for USB IrDA
 208           devices.  This is useful if you do not want to use the full IrDA
 209           stack.
 210
 211           To compile this driver as a module, choose M here: the
 212           module will be called ir-usb.
 213
 214 config USB_SERIAL_EDGEPORT
 215         tristate "USB Inside Out Edgeport Serial Driver"
 216         ---help---
 217           Say Y here if you want to use any of the following devices from
 218           Inside Out Networks (Digi):
 219           Edgeport/4
 220           Rapidport/4
 221           Edgeport/4t
 222           Edgeport/2
 223           Edgeport/4i
 224           Edgeport/2i
 225           Edgeport/421
 226           Edgeport/21
 227           Edgeport/8
 228           Edgeport/8 Dual
 229           Edgeport/2D8
 230           Edgeport/4D8
 231           Edgeport/8i
 232           Edgeport/2 DIN
 233           Edgeport/4 DIN
 234           Edgeport/16 Dual
 235
 236           To compile this driver as a module, choose M here: the
 237           module will be called io_edgeport.
 238
 239 config USB_SERIAL_EDGEPORT_TI
 240         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 241         help
 242           Say Y here if you want to use any of the devices from Inside Out
 243           Networks (Digi) that are not supported by the io_edgeport driver.
 244           This includes the Edgeport/1 device.
 245
 246           To compile this driver as a module, choose M here: the
 247           module will be called io_ti.
 248
 249 config USB_SERIAL_F81232
 250         tristate "USB Fintek F81232 Single Port Serial Driver"
 251         help
 252           Say Y here if you want to use the Fintek F81232 single
 253           port usb to serial adapter.
 254
 255           To compile this driver as a module, choose M here: the
 256           module will be called f81232.
 257
 258 config USB_SERIAL_GARMIN
 259        tristate "USB Garmin GPS driver"
 260        help
 261          Say Y here if you want to connect to your Garmin GPS.
 262          Should work with most Garmin GPS devices which have a native USB port.
 263
 264          See <http://sourceforge.net/projects/garmin-gps> for the latest
 265          version of the driver.
 266
 267          To compile this driver as a module, choose M here: the
 268          module will be called garmin_gps.
 269
 270 config USB_SERIAL_IPW
 271         tristate "USB IPWireless (3G UMTS TDD) Driver"
 272         select USB_SERIAL_WWAN
 273         help
 274           Say Y here if you want to use a IPWireless USB modem such as
 275           the ones supplied by Axity3G/Sentech South Africa.
 276
 277           To compile this driver as a module, choose M here: the
 278           module will be called ipw.
 279
 280 config USB_SERIAL_IUU
 281         tristate "USB Infinity USB Unlimited Phoenix Driver"
 282         help
 283           Say Y here if you want to use a IUU in phoenix mode and get
 284           an extra ttyUSBx device. More information available on
 285           http://eczema.ecze.com/iuu_phoenix.html
 286
 287           To compile this driver as a module, choose M here: the
 288           module will be called iuu_phoenix.o
 289
 290 config USB_SERIAL_KEYSPAN_PDA
 291         tristate "USB Keyspan PDA Single Port Serial Driver"
 292         select USB_EZUSB_FX2
 293         help
 294           Say Y here if you want to use a Keyspan PDA single port USB to
 295           serial converter device.  This driver makes use of firmware
 296           developed from scratch by Brian Warner.
 297
 298           To compile this driver as a module, choose M here: the
 299           module will be called keyspan_pda.
 300
 301 config USB_SERIAL_KEYSPAN
 302         tristate "USB Keyspan USA-xxx Serial Driver"
 303         select USB_EZUSB_FX2
 304         ---help---
 305           Say Y here if you want to use Keyspan USB to serial converter
 306           devices.  This driver makes use of Keyspan's official firmware
 307           and was developed with their support.  You must also include
 308           firmware to support your particular device(s).
 309
 310           See <http://blemings.org/hugh/keyspan.html> for more information.
 311
 312           To compile this driver as a module, choose M here: the
 313           module will be called keyspan.
 314
 315 config USB_SERIAL_KEYSPAN_MPR
 316         bool "USB Keyspan MPR Firmware"
 317         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 318         help
 319           Say Y here to include firmware for the Keyspan MPR converter.
 320
 321 config USB_SERIAL_KEYSPAN_USA28
 322         bool "USB Keyspan USA-28 Firmware"
 323         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 324         help
 325           Say Y here to include firmware for the USA-28 converter.
 326
 327 config USB_SERIAL_KEYSPAN_USA28X
 328         bool "USB Keyspan USA-28X Firmware"
 329         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 330         help
 331           Say Y here to include firmware for the USA-28X converter.
 332           Be sure you have a USA-28X, there are also 28XA and 28XB
 333           models, the label underneath has the actual part number.
 334
 335 config USB_SERIAL_KEYSPAN_USA28XA
 336         bool "USB Keyspan USA-28XA Firmware"
 337         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 338         help
 339           Say Y here to include firmware for the USA-28XA converter.
 340           Be sure you have a USA-28XA, there are also 28X and 28XB
 341           models, the label underneath has the actual part number.
 342
 343 config USB_SERIAL_KEYSPAN_USA28XB
 344         bool "USB Keyspan USA-28XB Firmware"
 345         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 346         help
 347           Say Y here to include firmware for the USA-28XB converter.
 348           Be sure you have a USA-28XB, there are also 28X and 28XA
 349           models, the label underneath has the actual part number.
 350
 351 config USB_SERIAL_KEYSPAN_USA19
 352         bool "USB Keyspan USA-19 Firmware"
 353         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 354         help
 355           Say Y here to include firmware for the USA-19 converter.
 356
 357 config USB_SERIAL_KEYSPAN_USA18X
 358         bool "USB Keyspan USA-18X Firmware"
 359         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 360         help
 361           Say Y here to include firmware for the USA-18X converter.
 362
 363 config USB_SERIAL_KEYSPAN_USA19W
 364         bool "USB Keyspan USA-19W Firmware"
 365         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 366         help
 367           Say Y here to include firmware for the USA-19W converter.
 368
 369 config USB_SERIAL_KEYSPAN_USA19QW
 370         bool "USB Keyspan USA-19QW Firmware"
 371         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 372         help
 373           Say Y here to include firmware for the USA-19QW converter.
 374
 375 config USB_SERIAL_KEYSPAN_USA19QI
 376         bool "USB Keyspan USA-19QI Firmware"
 377         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 378         help
 379           Say Y here to include firmware for the USA-19QI converter.
 380
 381 config USB_SERIAL_KEYSPAN_USA49W
 382         bool "USB Keyspan USA-49W Firmware"
 383         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 384         help
 385           Say Y here to include firmware for the USA-49W converter.
 386
 387 config USB_SERIAL_KEYSPAN_USA49WLC
 388         bool "USB Keyspan USA-49WLC Firmware"
 389         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 390         help
 391           Say Y here to include firmware for the USA-49WLC converter.
 392
 393 config USB_SERIAL_KLSI
 394         tristate "USB KL5KUSB105 (Palmconnect) Driver"
 395         ---help---
 396           Say Y here if you want to use a KL5KUSB105 - based single port
 397           serial adapter. The most widely known -- and currently the only
 398           tested -- device in this category is the PalmConnect USB Serial
 399           adapter sold by Palm Inc. for use with their Palm III and Palm V
 400           series PDAs.
 401
 402           Please read <file:Documentation/usb/usb-serial.txt> for more
 403           information.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called kl5kusb105.
 407
 408 config USB_SERIAL_KOBIL_SCT
 409         tristate "USB KOBIL chipcard reader"
 410         ---help---
 411           Say Y here if you want to use one of the following KOBIL USB chipcard
 412           readers:
 413
 414             - USB TWIN
 415             - KAAN Standard Plus
 416             - KAAN SIM
 417             - SecOVID Reader Plus
 418             - B1 Professional
 419             - KAAN Professional
 420
 421           Note that you need a current CT-API.
 422           To compile this driver as a module, choose M here: the
 423           module will be called kobil_sct.
 424
 425 config USB_SERIAL_MCT_U232
 426         tristate "USB MCT Single Port Serial Driver"
 427         ---help---
 428           Say Y here if you want to use a USB Serial single port adapter from
 429           Magic Control Technology Corp. (U232 is one of the model numbers).
 430
 431           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 432           BAY, Belkin F5U109, and Belkin F5U409 devices.
 433
 434           To compile this driver as a module, choose M here: the
 435           module will be called mct_u232.
 436
 437 config USB_SERIAL_METRO
 438         tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
 439         ---help---
 440           Say Y here if you want to use a USB POS Metrologic barcode scanner.
 441
 442           To compile this driver as a module, choose M here: the
 443           module will be called metro-usb.
 444
 445 config USB_SERIAL_MOS7720
 446         tristate "USB Moschip 7720 Serial Driver"
 447         ---help---
 448           Say Y here if you want to use USB Serial single and double
 449           port adapters from Moschip Semiconductor Tech.
 450
 451           To compile this driver as a module, choose M here: the
 452           module will be called mos7720.
 453
 454 config USB_SERIAL_MOS7715_PARPORT
 455         bool "Support for parallel port on the Moschip 7715"
 456         depends on USB_SERIAL_MOS7720
 457         depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 458         select PARPORT_NOT_PC
 459         ---help---
 460         Say Y if you have a Moschip 7715 device and would like to use
 461         the parallel port it provides.  The port will register with
 462         the parport subsystem as a low-level driver.
 463
 464 config USB_SERIAL_MOS7840
 465         tristate "USB Moschip 7840/7820 USB Serial Driver"
 466         ---help---
 467           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 468           Dual-Serial port device from MosChip Semiconductor.
 469
 470           The MCS7840 and MCS7820 have been developed to connect a wide range
 471           of standard serial devices to a USB host.  The MCS7840 has a USB
 472           device controller connected to four (4) individual UARTs while the
 473           MCS7820 controller connects to two (2) individual UARTs.
 474
 475           To compile this driver as a module, choose M here: the
 476           module will be called mos7840.  If unsure, choose N.
 477
 478 config USB_SERIAL_MXUPORT
 479         tristate "USB Moxa UPORT Serial Driver"
 480         ---help---
 481           Say Y here if you want to use a MOXA UPort Serial hub.
 482
 483           This driver supports:
 484
 485           [2 Port]
 486           - UPort 1250 :  2 Port RS-232/422/485 USB to Serial Hub
 487           - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
 488                           Isolation
 489
 490           [4 Port]
 491           - UPort 1410 :  4 Port RS-232 USB to Serial Hub
 492           - UPort 1450 :  4 Port RS-232/422/485 USB to Serial Hub
 493           - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
 494                           Isolation
 495
 496           [8 Port]
 497           - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
 498           - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
 499
 500           [16 Port]
 501           - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
 502           - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
 503
 504           To compile this driver as a module, choose M here: the
 505           module will be called mxuport.
 506
 507 config USB_SERIAL_NAVMAN
 508         tristate "USB Navman GPS device"
 509         help
 510           To compile this driver as a module, choose M here: the
 511           module will be called navman.
 512
 513 config USB_SERIAL_PL2303
 514         tristate "USB Prolific 2303 Single Port Serial Driver"
 515         help
 516           Say Y here if you want to use the PL2303 USB Serial single port
 517           adapter from Prolific.
 518
 519           To compile this driver as a module, choose M here: the
 520           module will be called pl2303.
 521
 522 config USB_SERIAL_OTI6858
 523         tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
 524         help
 525           Say Y here if you want to use the OTi-6858 single port USB to serial
 526           converter device.
 527
 528           To compile this driver as a module, choose M here: the
 529           module will be called oti6858.
 530
 531 config USB_SERIAL_QCAUX
 532         tristate "USB Qualcomm Auxiliary Serial Port Driver"
 533         help
 534           Say Y here if you want to use the auxiliary serial ports provided
 535           by many modems based on Qualcomm chipsets.  These ports often use
 536           a proprietary protocol called DM and cannot be used for AT- or
 537           PPP-based communication.
 538
 539           To compile this driver as a module, choose M here: the
 540           module will be called qcaux.  If unsure, choose N.
 541
 542 config USB_SERIAL_QUALCOMM
 543         tristate "USB Qualcomm Serial modem"
 544         select USB_SERIAL_WWAN
 545         help
 546           Say Y here if you have a Qualcomm USB modem device.  These are
 547           usually wireless cellular modems.
 548
 549           To compile this driver as a module, choose M here: the
 550           module will be called qcserial.
 551
 552 config USB_SERIAL_SPCP8X5
 553         tristate "USB SPCP8x5 USB To Serial Driver"
 554         help
 555           Say Y here if you want to use the spcp8x5 converter chip.  This is
 556           commonly found in some Z-Wave USB devices.
 557
 558           To compile this driver as a module, choose M here: the
 559           module will be called spcp8x5.
 560
 561 config USB_SERIAL_SAFE
 562         tristate "USB Safe Serial (Encapsulated) Driver"
 563
 564 config USB_SERIAL_SAFE_PADDED
 565         bool "USB Secure Encapsulated Driver - Padded"
 566         depends on USB_SERIAL_SAFE
 567
 568 config USB_SERIAL_SIERRAWIRELESS
 569         tristate "USB Sierra Wireless Driver"
 570         help
 571           Say M here if you want to use Sierra Wireless devices.
 572
 573           Many devices have a feature known as TRU-Install. For those devices
 574           to work properly, the USB Storage Sierra feature must be enabled.
 575
 576           To compile this driver as a module, choose M here: the
 577           module will be called sierra.
 578
 579 config USB_SERIAL_SYMBOL
 580         tristate "USB Symbol Barcode driver (serial mode)"
 581         help
 582           Say Y here if you want to use a Symbol USB Barcode device
 583           in serial emulation mode.
 584
 585           To compile this driver as a module, choose M here: the
 586           module will be called symbolserial.
 587
 588 config USB_SERIAL_TI
 589         tristate "USB TI 3410/5052 Serial Driver"
 590         help
 591           Say Y here if you want to use the TI USB 3410 or 5052
 592           serial devices.
 593
 594           To compile this driver as a module, choose M here: the
 595           module will be called ti_usb_3410_5052.
 596
 597 config USB_SERIAL_CYBERJACK
 598         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
 599         ---help---
 600           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 601           reader. This is an interface to ISO 7816 compatible contact-based
 602           chipcards, e.g. GSM SIMs.
 603
 604           To compile this driver as a module, choose M here: the
 605           module will be called cyberjack.
 606
 607           If unsure, say N.
 608
 609 config USB_SERIAL_XIRCOM
 610         tristate "USB Xircom / Entrega Single Port Serial Driver"
 611         select USB_EZUSB_FX2
 612         help
 613           Say Y here if you want to use a Xircom or Entrega single port USB to
 614           serial converter device.  This driver makes use of firmware
 615           developed from scratch by Brian Warner.
 616
 617           To compile this driver as a module, choose M here: the
 618           module will be called keyspan_pda.
 619
 620 config USB_SERIAL_WWAN
 621         tristate
 622
 623 config USB_SERIAL_OPTION
 624         tristate "USB driver for GSM and CDMA modems"
 625         select USB_SERIAL_WWAN
 626         help
 627           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 628
 629           This driver also supports several PCMCIA cards which have a
 630           built-in OHCI-USB adapter and an internally-connected GSM modem.
 631           The USB bus on these cards is not accessible externally.
 632
 633           Supported devices include (some of?) those made by:
 634           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 635
 636           To compile this driver as a module, choose M here: the
 637           module will be called option.
 638
 639           If this driver doesn't recognize your device,
 640           it might be accessible via the FTDI_SIO driver.
 641
 642 config USB_SERIAL_OMNINET
 643         tristate "USB ZyXEL omni.net LCD Plus Driver"
 644         help
 645           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 646
 647           To compile this driver as a module, choose M here: the
 648           module will be called omninet.
 649
 650 config USB_SERIAL_OPTICON
 651         tristate "USB Opticon Barcode driver (serial mode)"
 652         help
 653           Say Y here if you want to use a Opticon USB Barcode device
 654           in serial emulation mode.
 655
 656           To compile this driver as a module, choose M here: the
 657           module will be called opticon.
 658
 659 config USB_SERIAL_XSENS_MT
 660         tristate "Xsens motion tracker serial interface driver"
 661         help
 662           Say Y here if you want to use Xsens motion trackers.
 663
 664           This driver supports the new generation of motion trackers
 665           by Xsens. Older devices can be accessed using the FTDI_SIO
 666           driver.
 667
 668           To compile this driver as a module, choose M here: the
 669           module will be called xsens_mt.
 670
 671 config USB_SERIAL_WISHBONE
 672         tristate "USB-Wishbone adapter interface driver"
 673         help
 674           Say Y here if you want to use a USB attached Wishbone bus.
 675
 676           Wishbone is an open hardware SoC bus commonly used in FPGA
 677           designs. Bus access can be serialized using the Etherbone
 678           protocol <http://www.ohwr.org/projects/etherbone-core>.
 679
 680           This driver is intended to be used with devices which attach
 681           their internal Wishbone bus to a USB serial interface using
 682           the Etherbone protocol. A userspace library is required to
 683           speak the protocol made available by this driver as ttyUSBx.
 684
 685           To compile this driver as a module, choose M here: the
 686           module will be called wishbone-serial.
 687
 688 config USB_SERIAL_SSU100
 689         tristate "USB Quatech SSU-100 Single Port Serial Driver"
 690         help
 691           Say Y here if you want to use the Quatech SSU-100 single
 692           port usb to serial adapter.
 693
 694           To compile this driver as a module, choose M here: the
 695           module will be called ssu100.
 696
 697 config USB_SERIAL_QT2
 698         tristate "USB Quatech Serial Driver for USB 2 devices"
 699         help
 700           Say Y here if you want to use the Quatech USB 2
 701           serial adapters.
 702
 703           To compile this driver as a module, choose M here: the
 704           module will be called quatech-serial.
 705
 706 config USB_SERIAL_DEBUG
 707         tristate "USB Debugging Device"
 708         help
 709           Say Y here if you have a USB debugging device used to receive
 710           debugging data from another machine.  The most common of these
 711           devices is the NetChip TurboCONNECT device.
 712
 713           To compile this driver as a module, choose M here: the
 714           module will be called usb-debug.
 715
 716 endif # USB_SERIAL