drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menu "USB Serial Converter support"
   6         depends on USB!=n
   7
   8 config USB_SERIAL
   9         tristate "USB Serial Converter support"
  10         depends on USB
  11         ---help---
  12           Say Y here if you have a USB device that provides normal serial
  13           ports, or acts like a serial device, and you want to connect it to
  14           your USB bus.
  15
  16           Please read <file:Documentation/usb/usb-serial.txt> for more
  17           information on the specifics of the different devices that are
  18           supported, and on how to use them.
  19
  20           To compile this driver as a module, choose M here: the
  21           module will be called usbserial.
  22
  23 config USB_SERIAL_CONSOLE
  24         bool "USB Serial Console device support (EXPERIMENTAL)"
  25         depends on USB_SERIAL=y && EXPERIMENTAL
  26         ---help---
  27           If you say Y here, it will be possible to use a USB to serial
  28           converter port as the system console (the system console is the
  29           device which receives all kernel messages and warnings and which
  30           allows logins in single user mode). This could be useful if some
  31           terminal or printer is connected to that serial port.
  32
  33           Even if you say Y here, the currently visible virtual console
  34           (/dev/tty0) will still be used as the system console by default, but
  35           you can alter that using a kernel command line option such as
  36           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  37           your boot loader (lilo or loadlin) about how to pass options to the
  38           kernel at boot time.)
  39
  40           If you don't have a VGA card installed and you say Y here, the
  41           kernel will automatically use the first USB to serial converter
  42           port, /dev/ttyUSB0, as system console.
  43
  44           If unsure, say N.
  45
  46 config USB_SERIAL_GENERIC
  47         bool "USB Generic Serial Driver"
  48         depends on USB_SERIAL
  49         help
  50           Say Y here if you want to use the generic USB serial driver.  Please
  51           read <file:Documentation/usb/usb-serial.txt> for more information on
  52           using this driver.  It is recommended that the "USB Serial converter
  53           support" be compiled as a module for this driver to be used
  54           properly.
  55
  56 config USB_SERIAL_AIRPRIME
  57         tristate "USB AirPrime CDMA Wireless Driver"
  58         depends on USB_SERIAL
  59         help
  60           Say Y here if you want to use a AirPrime CDMA Wireless PC card.
  61
  62           To compile this driver as a module, choose M here: the
  63           module will be called airprime.
  64
  65 config USB_SERIAL_ANYDATA
  66         tristate "USB AnyData CDMA Wireless Driver"
  67         depends on USB_SERIAL
  68         help
  69           Say Y here if you want to use a AnyData CDMA device.
  70
  71           To compile this driver as a module, choose M here: the
  72           module will be called anydata.
  73
  74 config USB_SERIAL_BELKIN
  75         tristate "USB Belkin and Peracom Single Port Serial Driver"
  76         depends on USB_SERIAL
  77         help
  78           Say Y here if you want to use a Belkin USB Serial single port
  79           adaptor (F5U103 is one of the model numbers) or the Peracom single
  80           port USB to serial adapter.
  81
  82           To compile this driver as a module, choose M here: the
  83           module will be called belkin_sa.
  84
  85 config USB_SERIAL_WHITEHEAT
  86         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  87         depends on USB_SERIAL
  88         help
  89           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
  90           USB to serial converter device.
  91
  92           To compile this driver as a module, choose M here: the
  93           module will be called whiteheat.
  94
  95 config USB_SERIAL_DIGI_ACCELEPORT
  96         tristate "USB Digi International AccelePort USB Serial Driver"
  97         depends on USB_SERIAL
  98         ---help---
  99           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 100           2 port (plus parallel port) and 4 port USB serial converters.  The
 101           parallel port on the USB 2 appears as a third serial port on Linux.
 102           The Digi Acceleport USB 8 is not yet supported by this driver.
 103
 104           This driver works under SMP with the usb-uhci driver.  It does not
 105           work under SMP with the uhci driver.
 106
 107           To compile this driver as a module, choose M here: the
 108           module will be called digi_acceleport.
 109
 110 config USB_SERIAL_CP2101
 111         tristate "USB CP2101 UART Bridge Controller"
 112         depends on USB_SERIAL && EXPERIMENTAL
 113         help
 114           Say Y here if you want to use a CP2101/CP2102 based USB to RS232
 115           converter.
 116
 117           To compile this driver as a module, choose M here: the
 118           module will be called cp2101.
 119
 120 config USB_SERIAL_CYPRESS_M8
 121         tristate "USB Cypress M8 USB Serial Driver"
 122         depends on USB_SERIAL && EXPERIMENTAL
 123         help
 124           Say Y here if you want to use a device that contains the Cypress
 125           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 126
 127                 Attempted SMP support... send bug reports!
 128
 129           Supported microcontrollers in the CY4601 family are:
 130                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called cypress_m8.
 134
 135 config USB_SERIAL_EMPEG
 136         tristate "USB Empeg empeg-car Mark I/II Driver"
 137         depends on USB_SERIAL
 138         help
 139           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 140           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 141           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 142           tidbits of information.
 143
 144           To compile this driver as a module, choose M here: the
 145           module will be called empeg.
 146
 147 config USB_SERIAL_FTDI_SIO
 148         tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
 149         depends on USB_SERIAL && EXPERIMENTAL
 150         ---help---
 151           Say Y here if you want to use a FTDI SIO single port USB to serial
 152           converter device. The implementation I have is called the USC-1000.
 153           This driver has also be tested with the 245 and 232 devices.
 154
 155           See <http://ftdi-usb-sio.sourceforge.net/> for more
 156           information on this driver and the device.
 157
 158           To compile this driver as a module, choose M here: the
 159           module will be called ftdi_sio.
 160
 161 config USB_SERIAL_VISOR
 162         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 163         depends on USB_SERIAL
 164         help
 165           Say Y here if you want to connect to your HandSpring Visor, Palm
 166           m500 or m505 through its USB docking station. See
 167           <http://usbvisor.sourceforge.net/> for more information on using this
 168           driver.
 169
 170           To compile this driver as a module, choose M here: the
 171           module will be called visor.
 172
 173 config USB_SERIAL_IPAQ
 174         tristate "USB PocketPC PDA Driver"
 175         depends on USB_SERIAL
 176         help
 177           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 178           or any other PDA running Windows CE 3.0 or PocketPC 2002
 179           using a USB cradle/cable. For information on using the driver,
 180           read <file:Documentation/usb/usb-serial.txt>.
 181
 182           To compile this driver as a module, choose M here: the
 183           module will be called ipaq.
 184
 185 config USB_SERIAL_IR
 186         tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
 187         depends on USB_SERIAL && EXPERIMENTAL
 188         help
 189           Say Y here if you want to enable simple serial support for USB IrDA
 190           devices.  This is useful if you do not want to use the full IrDA
 191           stack.
 192
 193           To compile this driver as a module, choose M here: the
 194           module will be called ir-usb.
 195
 196 config USB_SERIAL_EDGEPORT
 197         tristate "USB Inside Out Edgeport Serial Driver"
 198         depends on USB_SERIAL
 199         ---help---
 200           Say Y here if you want to use any of the following devices from
 201           Inside Out Networks (Digi):
 202           Edgeport/4
 203           Rapidport/4
 204           Edgeport/4t
 205           Edgeport/2
 206           Edgeport/4i
 207           Edgeport/2i
 208           Edgeport/421
 209           Edgeport/21
 210           Edgeport/8
 211           Edgeport/8 Dual
 212           Edgeport/2D8
 213           Edgeport/4D8
 214           Edgeport/8i
 215           Edgeport/2 DIN
 216           Edgeport/4 DIN
 217           Edgeport/16 Dual
 218
 219           To compile this driver as a module, choose M here: the
 220           module will be called io_edgeport.
 221
 222 config USB_SERIAL_EDGEPORT_TI
 223         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 224         depends on USB_SERIAL
 225         help
 226           Say Y here if you want to use any of the devices from Inside Out
 227           Networks (Digi) that are not supported by the io_edgeport driver.
 228           This includes the Edgeport/1 device.
 229
 230           To compile this driver as a module, choose M here: the
 231           module will be called io_ti.
 232
 233 config USB_SERIAL_GARMIN
 234        tristate "USB Garmin GPS driver"
 235        depends on USB_SERIAL
 236        help
 237          Say Y here if you want to connect to your Garmin GPS.
 238          Should work with most Garmin GPS devices which have a native USB port.
 239
 240          See <http://sourceforge.net/projects/garmin-gps> for the latest
 241          version of the driver.
 242
 243          To compile this driver as a module, choose M here: the
 244          module will be called garmin_gps.
 245
 246 config USB_SERIAL_IPW
 247         tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
 248         depends on USB_SERIAL && EXPERIMENTAL
 249         help
 250           Say Y here if you want to use a IPWireless USB modem such as
 251           the ones supplied by Axity3G/Sentech South Africa.
 252
 253           To compile this driver as a module, choose M here: the
 254           module will be called ipw.
 255
 256 config USB_SERIAL_KEYSPAN_PDA
 257         tristate "USB Keyspan PDA Single Port Serial Driver"
 258         depends on USB_SERIAL
 259         help
 260           Say Y here if you want to use a Keyspan PDA single port USB to
 261           serial converter device.  This driver makes use of firmware
 262           developed from scratch by Brian Warner.
 263
 264           To compile this driver as a module, choose M here: the
 265           module will be called keyspan_pda.
 266
 267 config USB_SERIAL_KEYSPAN
 268         tristate "USB Keyspan USA-xxx Serial Driver"
 269         depends on USB_SERIAL
 270         ---help---
 271           Say Y here if you want to use Keyspan USB to serial converter
 272           devices.  This driver makes use of Keyspan's official firmware
 273           and was developed with their support.  You must also include
 274           firmware to support your particular device(s).
 275
 276           See <http://misc.nu/hugh/keyspan.html> for more information.
 277
 278           To compile this driver as a module, choose M here: the
 279           module will be called keyspan.
 280
 281 config USB_SERIAL_KEYSPAN_MPR
 282         bool "USB Keyspan MPR Firmware"
 283         depends on USB_SERIAL_KEYSPAN
 284         help
 285           Say Y here to include firmware for the Keyspan MPR converter.
 286
 287 config USB_SERIAL_KEYSPAN_USA28
 288         bool "USB Keyspan USA-28 Firmware"
 289         depends on USB_SERIAL_KEYSPAN
 290         help
 291           Say Y here to include firmware for the USA-28 converter.
 292
 293 config USB_SERIAL_KEYSPAN_USA28X
 294         bool "USB Keyspan USA-28X Firmware"
 295         depends on USB_SERIAL_KEYSPAN
 296         help
 297           Say Y here to include firmware for the USA-28X converter.
 298           Be sure you have a USA-28X, there are also 28XA and 28XB
 299           models, the label underneath has the actual part number.
 300
 301 config USB_SERIAL_KEYSPAN_USA28XA
 302         bool "USB Keyspan USA-28XA Firmware"
 303         depends on USB_SERIAL_KEYSPAN
 304         help
 305           Say Y here to include firmware for the USA-28XA converter.
 306           Be sure you have a USA-28XA, there are also 28X and 28XB
 307           models, the label underneath has the actual part number.
 308
 309 config USB_SERIAL_KEYSPAN_USA28XB
 310         bool "USB Keyspan USA-28XB Firmware"
 311         depends on USB_SERIAL_KEYSPAN
 312         help
 313           Say Y here to include firmware for the USA-28XB converter.
 314           Be sure you have a USA-28XB, there are also 28X and 28XA
 315           models, the label underneath has the actual part number.
 316
 317 config USB_SERIAL_KEYSPAN_USA19
 318         bool "USB Keyspan USA-19 Firmware"
 319         depends on USB_SERIAL_KEYSPAN
 320         help
 321           Say Y here to include firmware for the USA-19 converter.
 322
 323 config USB_SERIAL_KEYSPAN_USA18X
 324         bool "USB Keyspan USA-18X Firmware"
 325         depends on USB_SERIAL_KEYSPAN
 326         help
 327           Say Y here to include firmware for the USA-18X converter.
 328
 329 config USB_SERIAL_KEYSPAN_USA19W
 330         bool "USB Keyspan USA-19W Firmware"
 331         depends on USB_SERIAL_KEYSPAN
 332         help
 333           Say Y here to include firmware for the USA-19W converter.
 334
 335 config USB_SERIAL_KEYSPAN_USA19QW
 336         bool "USB Keyspan USA-19QW Firmware"
 337         depends on USB_SERIAL_KEYSPAN
 338         help
 339           Say Y here to include firmware for the USA-19QW converter.
 340
 341 config USB_SERIAL_KEYSPAN_USA19QI
 342         bool "USB Keyspan USA-19QI Firmware"
 343         depends on USB_SERIAL_KEYSPAN
 344         help
 345           Say Y here to include firmware for the USA-19QI converter.
 346
 347 config USB_SERIAL_KEYSPAN_USA49W
 348         bool "USB Keyspan USA-49W Firmware"
 349         depends on USB_SERIAL_KEYSPAN
 350         help
 351           Say Y here to include firmware for the USA-49W converter.
 352
 353 config USB_SERIAL_KEYSPAN_USA49WLC
 354         bool "USB Keyspan USA-49WLC Firmware"
 355         depends on USB_SERIAL_KEYSPAN
 356         help
 357           Say Y here to include firmware for the USA-49WLC converter.
 358
 359 config USB_SERIAL_KLSI
 360         tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
 361         depends on USB_SERIAL && EXPERIMENTAL
 362         ---help---
 363           Say Y here if you want to use a KL5KUSB105 - based single port
 364           serial adapter. The most widely known -- and currently the only
 365           tested -- device in this category is the PalmConnect USB Serial
 366           adapter sold by Palm Inc. for use with their Palm III and Palm V
 367           series PDAs.
 368
 369           Please read <file:Documentation/usb/usb-serial.txt> for more
 370           information.
 371
 372           To compile this driver as a module, choose M here: the
 373           module will be called kl5kusb105.
 374
 375 config USB_SERIAL_KOBIL_SCT
 376         tristate "USB KOBIL chipcard reader"
 377         depends on USB_SERIAL
 378         ---help---
 379           Say Y here if you want to use one of the following KOBIL USB chipcard
 380           readers:
 381
 382             - USB TWIN
 383             - KAAN Standard Plus
 384             - KAAN SIM
 385             - SecOVID Reader Plus
 386             - B1 Professional
 387             - KAAN Professional
 388
 389           Note that you need a current CT-API.
 390           To compile this driver as a module, choose M here: the
 391           module will be called kobil_sct.
 392
 393 config USB_SERIAL_MCT_U232
 394         tristate "USB MCT Single Port Serial Driver"
 395         depends on USB_SERIAL
 396         ---help---
 397           Say Y here if you want to use a USB Serial single port adapter from
 398           Magic Control Technology Corp. (U232 is one of the model numbers).
 399
 400           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 401           BAY devices.
 402
 403           To compile this driver as a module, choose M here: the
 404           module will be called mct_u232.
 405
 406 config USB_SERIAL_PL2303
 407         tristate "USB Prolific 2303 Single Port Serial Driver"
 408         depends on USB_SERIAL
 409         help
 410           Say Y here if you want to use the PL2303 USB Serial single port
 411           adapter from Prolific.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called pl2303.
 415
 416 config USB_SERIAL_HP4X
 417         tristate "USB HP4x Calculators support"
 418         depends on USB_SERIAL
 419         help
 420           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 421
 422           To compile this driver as a module, choose M here: the
 423           module will be called hp4x.
 424
 425 config USB_SERIAL_SAFE
 426         tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
 427         depends on USB_SERIAL && EXPERIMENTAL
 428
 429 config USB_SERIAL_SAFE_PADDED
 430         bool "USB Secure Encapsulated Driver - Padded"
 431         depends on USB_SERIAL_SAFE
 432
 433 config USB_SERIAL_TI
 434         tristate "USB TI 3410/5052 Serial Driver"
 435         depends on USB_SERIAL
 436         help
 437           Say Y here if you want to use the TI USB 3410 or 5052
 438           serial devices.
 439
 440           To compile this driver as a module, choose M here: the
 441           module will be called ti_usb_3410_5052.
 442
 443 config USB_SERIAL_CYBERJACK
 444         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
 445         depends on USB_SERIAL && EXPERIMENTAL
 446         ---help---
 447           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 448           reader. This is an interface to ISO 7816 compatible contactbased
 449           chipcards, e.g. GSM SIMs.
 450
 451           To compile this driver as a module, choose M here: the
 452           module will be called cyberjack.
 453
 454           If unsure, say N.
 455
 456 config USB_SERIAL_XIRCOM
 457         tristate "USB Xircom / Entregra Single Port Serial Driver"
 458         depends on USB_SERIAL
 459         help
 460           Say Y here if you want to use a Xircom or Entregra single port USB to
 461           serial converter device.  This driver makes use of firmware
 462           developed from scratch by Brian Warner.
 463
 464           To compile this driver as a module, choose M here: the
 465           module will be called keyspan_pda.
 466
 467 config USB_SERIAL_OPTION
 468         tristate "USB Option PCMCIA serial driver"
 469         depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
 470         help
 471           Say Y here if you want to use an Option card. This is a
 472           GSM card, controlled by three serial ports which are connected
 473           via an OHCI adapter located on a PC card.
 474
 475           To compile this driver as a module, choose M here: the
 476           module will be called option.
 477
 478 config USB_SERIAL_OMNINET
 479         tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 480         depends on USB_SERIAL && EXPERIMENTAL
 481         help
 482           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 483
 484           To compile this driver as a module, choose M here: the
 485           module will be called omninet.
 486
 487 config USB_EZUSB
 488         bool
 489         depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
 490         default y
 491
 492 endmenu
 493