drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menu "USB Serial Converter support"
   6         depends on USB!=n
   7
   8 config USB_SERIAL
   9         tristate "USB Serial Converter support"
  10         depends on USB
  11         ---help---
  12           Say Y here if you have a USB device that provides normal serial
  13           ports, or acts like a serial device, and you want to connect it to
  14           your USB bus.
  15
  16           Please read <file:Documentation/usb/usb-serial.txt> for more
  17           information on the specifics of the different devices that are
  18           supported, and on how to use them.
  19
  20           To compile this driver as a module, choose M here: the
  21           module will be called usbserial.
  22
  23 config USB_SERIAL_CONSOLE
  24         bool "USB Serial Console device support (EXPERIMENTAL)"
  25         depends on USB_SERIAL=y && EXPERIMENTAL
  26         ---help---
  27           If you say Y here, it will be possible to use a USB to serial
  28           converter port as the system console (the system console is the
  29           device which receives all kernel messages and warnings and which
  30           allows logins in single user mode). This could be useful if some
  31           terminal or printer is connected to that serial port.
  32
  33           Even if you say Y here, the currently visible virtual console
  34           (/dev/tty0) will still be used as the system console by default, but
  35           you can alter that using a kernel command line option such as
  36           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  37           your boot loader (lilo or loadlin) about how to pass options to the
  38           kernel at boot time.)
  39
  40           If you don't have a VGA card installed and you say Y here, the
  41           kernel will automatically use the first USB to serial converter
  42           port, /dev/ttyUSB0, as system console.
  43
  44           If unsure, say N.
  45
  46 config USB_SERIAL_GENERIC
  47         bool "USB Generic Serial Driver"
  48         depends on USB_SERIAL
  49         help
  50           Say Y here if you want to use the generic USB serial driver.  Please
  51           read <file:Documentation/usb/usb-serial.txt> for more information on
  52           using this driver.  It is recommended that the "USB Serial converter
  53           support" be compiled as a module for this driver to be used
  54           properly.
  55
  56 config USB_SERIAL_AIRPRIME
  57         tristate "USB AirPrime CDMA Wireless Driver"
  58         depends on USB_SERIAL
  59         help
  60           Say Y here if you want to use a AirPrime CDMA Wireless PC card.
  61
  62           To compile this driver as a module, choose M here: the
  63           module will be called airprime.
  64
  65 config USB_SERIAL_ARK3116
  66         tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
  67         depends on USB_SERIAL && EXPERIMENTAL
  68         help
  69           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  70           device.
  71
  72           To compile this driver as a module, choose M here: the
  73           module will be called ark3116
  74
  75 config USB_SERIAL_BELKIN
  76         tristate "USB Belkin and Peracom Single Port Serial Driver"
  77         depends on USB_SERIAL
  78         help
  79           Say Y here if you want to use a Belkin USB Serial single port
  80           adaptor (F5U103 is one of the model numbers) or the Peracom single
  81           port USB to serial adapter.
  82
  83           To compile this driver as a module, choose M here: the
  84           module will be called belkin_sa.
  85
  86 config USB_SERIAL_WHITEHEAT
  87         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  88         depends on USB_SERIAL
  89         help
  90           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
  91           USB to serial converter device.
  92
  93           To compile this driver as a module, choose M here: the
  94           module will be called whiteheat.
  95
  96 config USB_SERIAL_DIGI_ACCELEPORT
  97         tristate "USB Digi International AccelePort USB Serial Driver"
  98         depends on USB_SERIAL
  99         ---help---
 100           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 101           2 port (plus parallel port) and 4 port USB serial converters.  The
 102           parallel port on the USB 2 appears as a third serial port on Linux.
 103           The Digi Acceleport USB 8 is not yet supported by this driver.
 104
 105           This driver works under SMP with the usb-uhci driver.  It does not
 106           work under SMP with the uhci driver.
 107
 108           To compile this driver as a module, choose M here: the
 109           module will be called digi_acceleport.
 110
 111 config USB_SERIAL_CP2101
 112         tristate "USB CP2101 UART Bridge Controller"
 113         depends on USB_SERIAL && EXPERIMENTAL
 114         help
 115           Say Y here if you want to use a CP2101/CP2102 based USB to RS232
 116           converter.
 117
 118           To compile this driver as a module, choose M here: the
 119           module will be called cp2101.
 120
 121 config USB_SERIAL_CYPRESS_M8
 122         tristate "USB Cypress M8 USB Serial Driver"
 123         depends on USB_SERIAL && EXPERIMENTAL
 124         help
 125           Say Y here if you want to use a device that contains the Cypress
 126           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 127
 128                 Attempted SMP support... send bug reports!
 129
 130           Supported microcontrollers in the CY4601 family are:
 131                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 132
 133           To compile this driver as a module, choose M here: the
 134           module will be called cypress_m8.
 135
 136 config USB_SERIAL_EMPEG
 137         tristate "USB Empeg empeg-car Mark I/II Driver"
 138         depends on USB_SERIAL
 139         help
 140           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 141           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 142           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 143           tidbits of information.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called empeg.
 147
 148 config USB_SERIAL_FTDI_SIO
 149         tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
 150         depends on USB_SERIAL && EXPERIMENTAL
 151         ---help---
 152           Say Y here if you want to use a FTDI SIO single port USB to serial
 153           converter device. The implementation I have is called the USC-1000.
 154           This driver has also be tested with the 245 and 232 devices.
 155
 156           See <http://ftdi-usb-sio.sourceforge.net/> for more
 157           information on this driver and the device.
 158
 159           To compile this driver as a module, choose M here: the
 160           module will be called ftdi_sio.
 161
 162 config USB_SERIAL_FUNSOFT
 163         tristate "USB Fundamental Software Dongle Driver"
 164         depends on USB_SERIAL
 165         ---help---
 166           Say Y here if you want to use the Fundamental Software dongle.
 167
 168           To compile this driver as a module, choose M here: the
 169           module will be called funsoft.
 170
 171 config USB_SERIAL_VISOR
 172         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 173         depends on USB_SERIAL
 174         help
 175           Say Y here if you want to connect to your HandSpring Visor, Palm
 176           m500 or m505 through its USB docking station. See
 177           <http://usbvisor.sourceforge.net/> for more information on using this
 178           driver.
 179
 180           To compile this driver as a module, choose M here: the
 181           module will be called visor.
 182
 183 config USB_SERIAL_IPAQ
 184         tristate "USB PocketPC PDA Driver"
 185         depends on USB_SERIAL
 186         help
 187           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 188           or any other PDA running Windows CE 3.0 or PocketPC 2002
 189           using a USB cradle/cable. For information on using the driver,
 190           read <file:Documentation/usb/usb-serial.txt>.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called ipaq.
 194
 195 config USB_SERIAL_IR
 196         tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
 197         depends on USB_SERIAL && EXPERIMENTAL
 198         help
 199           Say Y here if you want to enable simple serial support for USB IrDA
 200           devices.  This is useful if you do not want to use the full IrDA
 201           stack.
 202
 203           To compile this driver as a module, choose M here: the
 204           module will be called ir-usb.
 205
 206 config USB_SERIAL_EDGEPORT
 207         tristate "USB Inside Out Edgeport Serial Driver"
 208         depends on USB_SERIAL
 209         ---help---
 210           Say Y here if you want to use any of the following devices from
 211           Inside Out Networks (Digi):
 212           Edgeport/4
 213           Rapidport/4
 214           Edgeport/4t
 215           Edgeport/2
 216           Edgeport/4i
 217           Edgeport/2i
 218           Edgeport/421
 219           Edgeport/21
 220           Edgeport/8
 221           Edgeport/8 Dual
 222           Edgeport/2D8
 223           Edgeport/4D8
 224           Edgeport/8i
 225           Edgeport/2 DIN
 226           Edgeport/4 DIN
 227           Edgeport/16 Dual
 228
 229           To compile this driver as a module, choose M here: the
 230           module will be called io_edgeport.
 231
 232 config USB_SERIAL_EDGEPORT_TI
 233         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 234         depends on USB_SERIAL
 235         help
 236           Say Y here if you want to use any of the devices from Inside Out
 237           Networks (Digi) that are not supported by the io_edgeport driver.
 238           This includes the Edgeport/1 device.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called io_ti.
 242
 243 config USB_SERIAL_GARMIN
 244        tristate "USB Garmin GPS driver"
 245        depends on USB_SERIAL
 246        help
 247          Say Y here if you want to connect to your Garmin GPS.
 248          Should work with most Garmin GPS devices which have a native USB port.
 249
 250          See <http://sourceforge.net/projects/garmin-gps> for the latest
 251          version of the driver.
 252
 253          To compile this driver as a module, choose M here: the
 254          module will be called garmin_gps.
 255
 256 config USB_SERIAL_IPW
 257         tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
 258         depends on USB_SERIAL && EXPERIMENTAL
 259         help
 260           Say Y here if you want to use a IPWireless USB modem such as
 261           the ones supplied by Axity3G/Sentech South Africa.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called ipw.
 265
 266 config USB_SERIAL_KEYSPAN_PDA
 267         tristate "USB Keyspan PDA Single Port Serial Driver"
 268         depends on USB_SERIAL
 269         help
 270           Say Y here if you want to use a Keyspan PDA single port USB to
 271           serial converter device.  This driver makes use of firmware
 272           developed from scratch by Brian Warner.
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called keyspan_pda.
 276
 277 config USB_SERIAL_KEYSPAN
 278         tristate "USB Keyspan USA-xxx Serial Driver"
 279         depends on USB_SERIAL
 280         ---help---
 281           Say Y here if you want to use Keyspan USB to serial converter
 282           devices.  This driver makes use of Keyspan's official firmware
 283           and was developed with their support.  You must also include
 284           firmware to support your particular device(s).
 285
 286           See <http://misc.nu/hugh/keyspan.html> for more information.
 287
 288           To compile this driver as a module, choose M here: the
 289           module will be called keyspan.
 290
 291 config USB_SERIAL_KEYSPAN_MPR
 292         bool "USB Keyspan MPR Firmware"
 293         depends on USB_SERIAL_KEYSPAN
 294         help
 295           Say Y here to include firmware for the Keyspan MPR converter.
 296
 297 config USB_SERIAL_KEYSPAN_USA28
 298         bool "USB Keyspan USA-28 Firmware"
 299         depends on USB_SERIAL_KEYSPAN
 300         help
 301           Say Y here to include firmware for the USA-28 converter.
 302
 303 config USB_SERIAL_KEYSPAN_USA28X
 304         bool "USB Keyspan USA-28X Firmware"
 305         depends on USB_SERIAL_KEYSPAN
 306         help
 307           Say Y here to include firmware for the USA-28X converter.
 308           Be sure you have a USA-28X, there are also 28XA and 28XB
 309           models, the label underneath has the actual part number.
 310
 311 config USB_SERIAL_KEYSPAN_USA28XA
 312         bool "USB Keyspan USA-28XA Firmware"
 313         depends on USB_SERIAL_KEYSPAN
 314         help
 315           Say Y here to include firmware for the USA-28XA converter.
 316           Be sure you have a USA-28XA, there are also 28X and 28XB
 317           models, the label underneath has the actual part number.
 318
 319 config USB_SERIAL_KEYSPAN_USA28XB
 320         bool "USB Keyspan USA-28XB Firmware"
 321         depends on USB_SERIAL_KEYSPAN
 322         help
 323           Say Y here to include firmware for the USA-28XB converter.
 324           Be sure you have a USA-28XB, there are also 28X and 28XA
 325           models, the label underneath has the actual part number.
 326
 327 config USB_SERIAL_KEYSPAN_USA19
 328         bool "USB Keyspan USA-19 Firmware"
 329         depends on USB_SERIAL_KEYSPAN
 330         help
 331           Say Y here to include firmware for the USA-19 converter.
 332
 333 config USB_SERIAL_KEYSPAN_USA18X
 334         bool "USB Keyspan USA-18X Firmware"
 335         depends on USB_SERIAL_KEYSPAN
 336         help
 337           Say Y here to include firmware for the USA-18X converter.
 338
 339 config USB_SERIAL_KEYSPAN_USA19W
 340         bool "USB Keyspan USA-19W Firmware"
 341         depends on USB_SERIAL_KEYSPAN
 342         help
 343           Say Y here to include firmware for the USA-19W converter.
 344
 345 config USB_SERIAL_KEYSPAN_USA19QW
 346         bool "USB Keyspan USA-19QW Firmware"
 347         depends on USB_SERIAL_KEYSPAN
 348         help
 349           Say Y here to include firmware for the USA-19QW converter.
 350
 351 config USB_SERIAL_KEYSPAN_USA19QI
 352         bool "USB Keyspan USA-19QI Firmware"
 353         depends on USB_SERIAL_KEYSPAN
 354         help
 355           Say Y here to include firmware for the USA-19QI converter.
 356
 357 config USB_SERIAL_KEYSPAN_USA49W
 358         bool "USB Keyspan USA-49W Firmware"
 359         depends on USB_SERIAL_KEYSPAN
 360         help
 361           Say Y here to include firmware for the USA-49W converter.
 362
 363 config USB_SERIAL_KEYSPAN_USA49WLC
 364         bool "USB Keyspan USA-49WLC Firmware"
 365         depends on USB_SERIAL_KEYSPAN
 366         help
 367           Say Y here to include firmware for the USA-49WLC converter.
 368
 369 config USB_SERIAL_KLSI
 370         tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
 371         depends on USB_SERIAL && EXPERIMENTAL
 372         ---help---
 373           Say Y here if you want to use a KL5KUSB105 - based single port
 374           serial adapter. The most widely known -- and currently the only
 375           tested -- device in this category is the PalmConnect USB Serial
 376           adapter sold by Palm Inc. for use with their Palm III and Palm V
 377           series PDAs.
 378
 379           Please read <file:Documentation/usb/usb-serial.txt> for more
 380           information.
 381
 382           To compile this driver as a module, choose M here: the
 383           module will be called kl5kusb105.
 384
 385 config USB_SERIAL_KOBIL_SCT
 386         tristate "USB KOBIL chipcard reader"
 387         depends on USB_SERIAL
 388         ---help---
 389           Say Y here if you want to use one of the following KOBIL USB chipcard
 390           readers:
 391
 392             - USB TWIN
 393             - KAAN Standard Plus
 394             - KAAN SIM
 395             - SecOVID Reader Plus
 396             - B1 Professional
 397             - KAAN Professional
 398
 399           Note that you need a current CT-API.
 400           To compile this driver as a module, choose M here: the
 401           module will be called kobil_sct.
 402
 403 config USB_SERIAL_MCT_U232
 404         tristate "USB MCT Single Port Serial Driver"
 405         depends on USB_SERIAL
 406         ---help---
 407           Say Y here if you want to use a USB Serial single port adapter from
 408           Magic Control Technology Corp. (U232 is one of the model numbers).
 409
 410           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 411           BAY, Belkin F5U109, and Belkin F5U409 devices.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called mct_u232.
 415
 416 config USB_SERIAL_NAVMAN
 417         tristate "USB Navman GPS device"
 418         depends on USB_SERIAL
 419         help
 420           To compile this driver as a module, choose M here: the
 421           module will be called navman.
 422
 423 config USB_SERIAL_PL2303
 424         tristate "USB Prolific 2303 Single Port Serial Driver"
 425         depends on USB_SERIAL
 426         help
 427           Say Y here if you want to use the PL2303 USB Serial single port
 428           adapter from Prolific.
 429
 430           To compile this driver as a module, choose M here: the
 431           module will be called pl2303.
 432
 433 config USB_SERIAL_HP4X
 434         tristate "USB HP4x Calculators support"
 435         depends on USB_SERIAL
 436         help
 437           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 438
 439           To compile this driver as a module, choose M here: the
 440           module will be called hp4x.
 441
 442 config USB_SERIAL_SAFE
 443         tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
 444         depends on USB_SERIAL && EXPERIMENTAL
 445
 446 config USB_SERIAL_SAFE_PADDED
 447         bool "USB Secure Encapsulated Driver - Padded"
 448         depends on USB_SERIAL_SAFE
 449
 450 config USB_SERIAL_SIERRAWIRELESS
 451         tristate "USB Sierra Wireless Driver"
 452         depends on USB_SERIAL
 453         help
 454           Say M here if you want to use a Sierra Wireless device (if
 455           using an PC 5220 or AC580 please use the Airprime driver
 456           instead).
 457
 458           To compile this driver as a module, choose M here: the
 459           module will be called sierra.
 460
 461 config USB_SERIAL_TI
 462         tristate "USB TI 3410/5052 Serial Driver"
 463         depends on USB_SERIAL
 464         help
 465           Say Y here if you want to use the TI USB 3410 or 5052
 466           serial devices.
 467
 468           To compile this driver as a module, choose M here: the
 469           module will be called ti_usb_3410_5052.
 470
 471 config USB_SERIAL_CYBERJACK
 472         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
 473         depends on USB_SERIAL && EXPERIMENTAL
 474         ---help---
 475           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 476           reader. This is an interface to ISO 7816 compatible contactbased
 477           chipcards, e.g. GSM SIMs.
 478
 479           To compile this driver as a module, choose M here: the
 480           module will be called cyberjack.
 481
 482           If unsure, say N.
 483
 484 config USB_SERIAL_XIRCOM
 485         tristate "USB Xircom / Entregra Single Port Serial Driver"
 486         depends on USB_SERIAL
 487         help
 488           Say Y here if you want to use a Xircom or Entregra single port USB to
 489           serial converter device.  This driver makes use of firmware
 490           developed from scratch by Brian Warner.
 491
 492           To compile this driver as a module, choose M here: the
 493           module will be called keyspan_pda.
 494
 495 config USB_SERIAL_OPTION
 496         tristate "USB driver for GSM and CDMA modems"
 497         depends on USB_SERIAL
 498         help
 499           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 500
 501           This driver also supports several PCMCIA cards which have a
 502           built-in OHCI-USB adapter and an internally-connected GSM modem.
 503           The USB bus on these cards is not accessible externally.
 504
 505           Supported devices include (some of?) those made by:
 506           Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or
 507           Anydata.
 508
 509           To compile this driver as a module, choose M here: the
 510           module will be called option.
 511
 512           If this driver doesn't recognize your device,
 513           it might be accessible via the FTDI_SIO driver.
 514
 515 config USB_SERIAL_OMNINET
 516         tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 517         depends on USB_SERIAL && EXPERIMENTAL
 518         help
 519           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 520
 521           To compile this driver as a module, choose M here: the
 522           module will be called omninet.
 523
 524 config USB_EZUSB
 525         bool
 526         depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
 527         default y
 528
 529 endmenu
 530