drivers/usb/storage/Kconfig

   1 #
   2 # USB Storage driver configuration
   3 #
   4
   5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
   6 comment "also be needed; see USB_STORAGE Help for more info"
   7         depends on USB
   8
   9 config USB_STORAGE
  10         tristate "USB Mass Storage support"
  11         depends on USB && SCSI
  12         ---help---
  13           Say Y here if you want to connect USB mass storage devices to your
  14           computer's USB port. This is the driver you need for USB
  15           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
  16           USB flash devices, and memory sticks, along with
  17           similar devices. This driver may also be used for some cameras
  18           and card readers.
  19
  20           This option depends on 'SCSI' support being enabled, but you
  21           probably also need 'SCSI device support: SCSI disk support'
  22           (BLK_DEV_SD) for most USB storage devices.
  23
  24           To compile this driver as a module, choose M here: the
  25           module will be called usb-storage.
  26
  27 config USB_STORAGE_DEBUG
  28         bool "USB Mass Storage verbose debug"
  29         depends on USB_STORAGE
  30         help
  31           Say Y here in order to have the USB Mass Storage code generate
  32           verbose debugging messages.
  33
  34 config USB_STORAGE_DATAFAB
  35         tristate "Datafab Compact Flash Reader support"
  36         depends on USB_STORAGE
  37         help
  38           Support for certain Datafab CompactFlash readers.
  39           Datafab has a web page at <http://www.datafab.com/>.
  40
  41           If this driver is compiled as a module, it will be named ums-datafab.
  42
  43 config USB_STORAGE_FREECOM
  44         tristate "Freecom USB/ATAPI Bridge support"
  45         depends on USB_STORAGE
  46         help
  47           Support for the Freecom USB to IDE/ATAPI adaptor.
  48           Freecom has a web page at <http://www.freecom.de/>.
  49
  50           If this driver is compiled as a module, it will be named ums-freecom.
  51
  52 config USB_STORAGE_ISD200
  53         tristate "ISD-200 USB/ATA Bridge support"
  54         depends on USB_STORAGE
  55         ---help---
  56           Say Y here if you want to use USB Mass Store devices based
  57           on the In-Systems Design ISD-200 USB/ATA bridge.
  58
  59           Some of the products that use this chip are:
  60
  61           - Archos Jukebox 6000
  62           - ISD SmartCable for Storage
  63           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
  64           - Sony CRX10U CD-R/RW drive
  65           - CyQ've CQ8060A CDRW drive
  66           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
  67
  68           If this driver is compiled as a module, it will be named ums-isd200.
  69
  70 config USB_STORAGE_USBAT
  71         tristate "USBAT/USBAT02-based storage support"
  72         depends on USB_STORAGE
  73         help
  74           Say Y here to include additional code to support storage devices
  75           based on the SCM/Shuttle USBAT/USBAT02 processors.
  76
  77           Devices reported to work with this driver include:
  78           - CompactFlash reader included with Kodak DC3800 camera
  79           - Dane-Elec Zmate CompactFlash reader
  80           - Delkin Efilm reader2
  81           - HP 8200e/8210e/8230e CD-Writer Plus drives
  82           - I-JAM JS-50U
  83           - Jessops CompactFlash JESDCFRU BLACK
  84           - Kingston Technology PCREAD-USB/CF
  85           - Maxell UA4 CompactFlash reader
  86           - Memorex UCF-100
  87           - Microtech ZiO! ICS-45 CF2
  88           - RCA LYRA MP3 portable
  89           - Sandisk ImageMate SDDR-05b
  90
  91           If this driver is compiled as a module, it will be named ums-usbat.
  92
  93 config USB_STORAGE_SDDR09
  94         tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
  95         depends on USB_STORAGE
  96         help
  97           Say Y here to include additional code to support the Sandisk SDDR-09
  98           SmartMedia reader in the USB Mass Storage driver.
  99           Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 100
 101           If this driver is compiled as a module, it will be named ums-sddr09.
 102
 103 config USB_STORAGE_SDDR55
 104         tristate "SanDisk SDDR-55 SmartMedia support"
 105         depends on USB_STORAGE
 106         help
 107           Say Y here to include additional code to support the Sandisk SDDR-55
 108           SmartMedia reader in the USB Mass Storage driver.
 109
 110           If this driver is compiled as a module, it will be named ums-sddr55.
 111
 112 config USB_STORAGE_JUMPSHOT
 113         tristate "Lexar Jumpshot Compact Flash Reader"
 114         depends on USB_STORAGE
 115         help
 116           Say Y here to include additional code to support the Lexar Jumpshot
 117           USB CompactFlash reader.
 118
 119           If this driver is compiled as a module, it will be named ums-jumpshot.
 120
 121 config USB_STORAGE_ALAUDA
 122         tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
 123         depends on USB_STORAGE
 124         help
 125           Say Y here to include additional code to support the Olympus MAUSB-10
 126           and Fujifilm DPC-R1 USB Card reader/writer devices.
 127
 128           These devices are based on the Alauda chip and support both
 129           XD and SmartMedia cards.
 130
 131           If this driver is compiled as a module, it will be named ums-alauda.
 132
 133 config USB_STORAGE_ONETOUCH
 134         tristate "Support OneTouch Button on Maxtor Hard Drives"
 135         depends on USB_STORAGE
 136         depends on INPUT=y || INPUT=USB_STORAGE
 137         help
 138           Say Y here to include additional code to support the Maxtor OneTouch
 139           USB hard drive's onetouch button.
 140
 141           This code registers the button on the front of Maxtor OneTouch USB
 142           hard drive's as an input device. An action can be associated with
 143           this input in any keybinding software. (e.g. gnome's keyboard short-
 144           cuts)
 145
 146           If this driver is compiled as a module, it will be named ums-onetouch.
 147
 148 config USB_STORAGE_KARMA
 149         tristate "Support for Rio Karma music player"
 150         depends on USB_STORAGE
 151         help
 152           Say Y here to include additional code to support the Rio Karma
 153           USB interface.
 154
 155           This code places the Rio Karma into mass storage mode, enabling
 156           it to be mounted as an ordinary filesystem. Performing an eject
 157           on the resulting scsi device node returns the Karma to normal
 158           operation.
 159
 160           If this driver is compiled as a module, it will be named ums-karma.
 161
 162 config USB_STORAGE_CYPRESS_ATACB
 163         tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 164         depends on USB_STORAGE
 165         ---help---
 166           Say Y here if you want to use SAT (ata pass through) on devices based
 167           on the Cypress USB/ATA bridge supporting ATACB. This will allow you
 168           to use tools to tune and monitor your drive (like hdparm or smartctl).
 169
 170           If you say no here your device will still work with the standard usb
 171           mass storage class.
 172
 173           If this driver is compiled as a module, it will be named ums-cypress.
 174
 175 config USB_UAS
 176         tristate "USB Attached SCSI"
 177         depends on USB && SCSI
 178         help
 179           The USB Attached SCSI protocol is supported by some USB
 180           storage devices.  It permits higher performance by supporting
 181           multiple outstanding commands.
 182
 183           If you don't know whether you have a UAS device, it is safe to
 184           say 'Y' or 'M' here and the kernel will use the right driver.
 185
 186           If you compile this driver as a module, it will be named uas.
 187
 188 config USB_LIBUSUAL
 189         bool "The shared table of common (or usual) storage devices"
 190         depends on USB
 191         help
 192           This module contains a table of common (or usual) devices
 193           for usb-storage and ub drivers, and allows to switch binding
 194           of these devices without rebuilding modules.
 195
 196           Typical syntax of /etc/modprobe.conf is:
 197
 198                 options libusual bias="ub"
 199
 200           If unsure, say N.