drivers/usb/storage/Kconfig

   1 #
   2 # USB Storage driver configuration
   3 #
   4
   5 comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
   6         depends on USB
   7
   8 config USB_STORAGE
   9         tristate "USB Mass Storage support"
  10         depends on USB
  11         select SCSI
  12         ---help---
  13           Say Y here if you want to connect USB mass storage devices to your
  14           computer's USB port. This is the driver you need for USB
  15           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
  16           USB flash devices, and memory sticks, along with
  17           similar devices. This driver may also be used for some cameras
  18           and card readers.
  19
  20           This option 'selects' (turns on, enables) 'SCSI', but you
  21           probably also need 'SCSI device support: SCSI disk support'
  22           (BLK_DEV_SD) for most USB storage devices.
  23
  24           To compile this driver as a module, choose M here: the
  25           module will be called usb-storage.
  26
  27 config USB_STORAGE_DEBUG
  28         bool "USB Mass Storage verbose debug"
  29         depends on USB_STORAGE
  30         help
  31           Say Y here in order to have the USB Mass Storage code generate
  32           verbose debugging messages.
  33
  34 config USB_STORAGE_DATAFAB
  35         bool "Datafab Compact Flash Reader support (EXPERIMENTAL)"
  36         depends on USB_STORAGE && EXPERIMENTAL
  37         help
  38           Support for certain Datafab CompactFlash readers.
  39           Datafab has a web page at <http://www.datafabusa.com/>.
  40
  41 config USB_STORAGE_FREECOM
  42         bool "Freecom USB/ATAPI Bridge support"
  43         depends on USB_STORAGE
  44         help
  45           Support for the Freecom USB to IDE/ATAPI adaptor.
  46           Freecom has a web page at <http://www.freecom.de/>.
  47
  48 config USB_STORAGE_ISD200
  49         bool "ISD-200 USB/ATA Bridge support"
  50         depends on USB_STORAGE && BLK_DEV_IDE
  51         ---help---
  52           Say Y here if you want to use USB Mass Store devices based
  53           on the In-Systems Design ISD-200 USB/ATA bridge.
  54
  55           Some of the products that use this chip are:
  56
  57           - Archos Jukebox 6000
  58           - ISD SmartCable for Storage
  59           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
  60           - Sony CRX10U CD-R/RW drive
  61           - CyQ've CQ8060A CDRW drive
  62           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
  63
  64 config USB_STORAGE_DPCM
  65         bool "Microtech/ZiO! CompactFlash/SmartMedia support"
  66         depends on USB_STORAGE
  67         help
  68           Say Y here to support the Microtech/ZiO! CompactFlash reader.
  69           There is a web page at <http://www.ziocorp.com/products/>.
  70
  71 config USB_STORAGE_USBAT
  72         bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)"
  73         depends on USB_STORAGE && EXPERIMENTAL
  74         help
  75           Say Y here to include additional code to support storage devices
  76           based on the SCM/Shuttle USBAT/USBAT02 processors.
  77
  78           Devices reported to work with this driver include:
  79           - CompactFlash reader included with Kodak DC3800 camera
  80           - Dane-Elec Zmate CompactFlash reader
  81           - Delkin Efilm reader2
  82           - HP 8200e/8210e/8230e CD-Writer Plus drives
  83           - I-JAM JS-50U
  84           - Jessops CompactFlash JESDCFRU BLACK
  85           - Kingston Technology PCREAD-USB/CF
  86           - Maxell UA4 CompactFlash reader
  87           - Memorex UCF-100
  88           - Microtech ZiO! ICS-45 CF2
  89           - RCA LYRA MP3 portable
  90           - Sandisk ImageMate SDDR-05b
  91
  92 config USB_STORAGE_SDDR09
  93         bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)"
  94         depends on USB_STORAGE && EXPERIMENTAL
  95         help
  96           Say Y here to include additional code to support the Sandisk SDDR-09
  97           SmartMedia reader in the USB Mass Storage driver.
  98           Also works for the Microtech Zio! SmartMedia reader.
  99
 100 config USB_STORAGE_SDDR55
 101         bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)"
 102         depends on USB_STORAGE && EXPERIMENTAL
 103         help
 104           Say Y here to include additional code to support the Sandisk SDDR-55
 105           SmartMedia reader in the USB Mass Storage driver.
 106
 107 config USB_STORAGE_JUMPSHOT
 108         bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)"
 109         depends on USB_STORAGE && EXPERIMENTAL
 110         help
 111           Say Y here to include additional code to support the Lexar Jumpshot
 112           USB CompactFlash reader.
 113