drivers/video/xilinxfb.c

   1 /*
   2  * Xilinx TFT frame buffer driver
   3  *
   4  * Author: MontaVista Software, Inc.
   5  *         source@mvista.com
   6  *
   7  * 2002-2007 (c) MontaVista Software, Inc.
   8  * 2007 (c) Secret Lab Technologies, Ltd.
   9  * 2009 (c) Xilinx Inc.
  10  *
  11  * This file is licensed under the terms of the GNU General Public License
  12  * version 2.  This program is licensed "as is" without any warranty of any
  13  * kind, whether express or implied.
  14  */
  15
  16 /*
  17  * This driver was based on au1100fb.c by MontaVista rewritten for 2.6
  18  * by Embedded Alley Solutions <source@embeddedalley.com>, which in turn
  19  * was based on skeletonfb.c, Skeleton for a frame buffer device by
  20  * Geert Uytterhoeven.
  21  */
  22
  23 #include <linux/device.h>
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/version.h>
  27 #include <linux/errno.h>
  28 #include <linux/string.h>
  29 #include <linux/mm.h>
  30 #include <linux/fb.h>
  31 #include <linux/init.h>
  32 #include <linux/dma-mapping.h>
  33 #include <linux/of_device.h>
  34 #include <linux/of_platform.h>
  35 #include <linux/io.h>
  36 #include <linux/xilinxfb.h>
  37 #include <linux/slab.h>
  38 #include <asm/dcr.h>
  39
  40 #define DRIVER_NAME             "xilinxfb"
  41
  42
  43 /*
  44  * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
  45  * the VGA port on the Xilinx ML40x board. This is a hardware display
  46  * controller for a 640x480 resolution TFT or VGA screen.
  47  *
  48  * The interface to the framebuffer is nice and simple.  There are two
  49  * control registers.  The first tells the LCD interface where in memory
  50  * the frame buffer is (only the 11 most significant bits are used, so
  51  * don't start thinking about scrolling).  The second allows the LCD to
  52  * be turned on or off as well as rotated 180 degrees.
  53  *
  54  * In case of direct PLB access the second control register will be at
  55  * an offset of 4 as compared to the DCR access where the offset is 1
  56  * i.e. REG_CTRL. So this is taken care in the function
  57  * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
  58  * direct PLB access.
  59  */
  60 #define NUM_REGS        2
  61 #define REG_FB_ADDR     0
  62 #define REG_CTRL        1
  63 #define REG_CTRL_ENABLE  0x0001
  64 #define REG_CTRL_ROTATE  0x0002
  65
  66 /*
  67  * The hardware only handles a single mode: 640x480 24 bit true
  68  * color. Each pixel gets a word (32 bits) of memory.  Within each word,
  69  * the 8 most significant bits are ignored, the next 8 bits are the red
  70  * level, the next 8 bits are the green level and the 8 least
  71  * significant bits are the blue level.  Each row of the LCD uses 1024
  72  * words, but only the first 640 pixels are displayed with the other 384
  73  * words being ignored.  There are 480 rows.
  74  */
  75 #define BYTES_PER_PIXEL 4
  76 #define BITS_PER_PIXEL  (BYTES_PER_PIXEL * 8)
  77
  78 #define RED_SHIFT       16
  79 #define GREEN_SHIFT     8
  80 #define BLUE_SHIFT      0
  81
  82 #define PALETTE_ENTRIES_NO      16      /* passed to fb_alloc_cmap() */
  83
  84 /*
  85  * Default xilinxfb configuration
  86  */
  87 static struct xilinxfb_platform_data xilinx_fb_default_pdata = {
  88         .xres = 640,
  89         .yres = 480,
  90         .xvirt = 1024,
  91         .yvirt = 480,
  92 };
  93
  94 /*
  95  * Here are the default fb_fix_screeninfo and fb_var_screeninfo structures
  96  */
  97 static struct fb_fix_screeninfo xilinx_fb_fix = {
  98         .id =           "Xilinx",
  99         .type =         FB_TYPE_PACKED_PIXELS,
 100         .visual =       FB_VISUAL_TRUECOLOR,
 101         .accel =        FB_ACCEL_NONE
 102 };
 103
 104 static struct fb_var_screeninfo xilinx_fb_var = {
 105         .bits_per_pixel =       BITS_PER_PIXEL,
 106
 107         .red =          { RED_SHIFT, 8, 0 },
 108         .green =        { GREEN_SHIFT, 8, 0 },
 109         .blue =         { BLUE_SHIFT, 8, 0 },
 110         .transp =       { 0, 0, 0 },
 111
 112         .activate =     FB_ACTIVATE_NOW
 113 };
 114
 115
 116 #define PLB_ACCESS_FLAG 0x1             /* 1 = PLB, 0 = DCR */
 117
 118 struct xilinxfb_drvdata {
 119
 120         struct fb_info  info;           /* FB driver info record */
 121
 122         phys_addr_t     regs_phys;      /* phys. address of the control
 123                                                 registers */
 124         void __iomem    *regs;          /* virt. address of the control
 125                                                 registers */
 126
 127         dcr_host_t      dcr_host;
 128         unsigned int    dcr_len;
 129
 130         void            *fb_virt;       /* virt. address of the frame buffer */
 131         dma_addr_t      fb_phys;        /* phys. address of the frame buffer */
 132         int             fb_alloced;     /* Flag, was the fb memory alloced? */
 133
 134         u8              flags;          /* features of the driver */
 135
 136         u32             reg_ctrl_default;
 137
 138         u32             pseudo_palette[PALETTE_ENTRIES_NO];
 139                                         /* Fake palette of 16 colors */
 140 };
 141
 142 #define to_xilinxfb_drvdata(_info) \
 143         container_of(_info, struct xilinxfb_drvdata, info)
 144
 145 /*
 146  * The XPS TFT Controller can be accessed through PLB or DCR interface.
 147  * To perform the read/write on the registers we need to check on
 148  * which bus its connected and call the appropriate write API.
 149  */
 150 static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
 151                                 u32 val)
 152 {
 153         if (drvdata->flags & PLB_ACCESS_FLAG)
 154                 out_be32(drvdata->regs + (offset << 2), val);
 155         else
 156                 dcr_write(drvdata->dcr_host, offset, val);
 157
 158 }
 159
 160 static int
 161 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
 162         unsigned transp, struct fb_info *fbi)
 163 {
 164         u32 *palette = fbi->pseudo_palette;
 165
 166         if (regno >= PALETTE_ENTRIES_NO)
 167                 return -EINVAL;
 168
 169         if (fbi->var.grayscale) {
 170                 /* Convert color to grayscale.
 171                  * grayscale = 0.30*R + 0.59*G + 0.11*B */
 172                 red = green = blue =
 173                         (red * 77 + green * 151 + blue * 28 + 127) >> 8;
 174         }
 175
 176         /* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */
 177
 178         /* We only handle 8 bits of each color. */
 179         red >>= 8;
 180         green >>= 8;
 181         blue >>= 8;
 182         palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) |
 183                          (blue << BLUE_SHIFT);
 184
 185         return 0;
 186 }
 187
 188 static int
 189 xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 190 {
 191         struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi);
 192
 193         switch (blank_mode) {
 194         case FB_BLANK_UNBLANK:
 195                 /* turn on panel */
 196                 xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
 197                 break;
 198
 199         case FB_BLANK_NORMAL:
 200         case FB_BLANK_VSYNC_SUSPEND:
 201         case FB_BLANK_HSYNC_SUSPEND:
 202         case FB_BLANK_POWERDOWN:
 203                 /* turn off panel */
 204                 xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 205         default:
 206                 break;
 207
 208         }
 209         return 0; /* success */
 210 }
 211
 212 static struct fb_ops xilinxfb_ops =
 213 {
 214         .owner                  = THIS_MODULE,
 215         .fb_setcolreg           = xilinx_fb_setcolreg,
 216         .fb_blank               = xilinx_fb_blank,
 217         .fb_fillrect            = cfb_fillrect,
 218         .fb_copyarea            = cfb_copyarea,
 219         .fb_imageblit           = cfb_imageblit,
 220 };
 221
 222 /* ---------------------------------------------------------------------
 223  * Bus independent setup/teardown
 224  */
 225
 226 static int xilinxfb_assign(struct device *dev,
 227                            struct xilinxfb_drvdata *drvdata,
 228                            unsigned long physaddr,
 229                            struct xilinxfb_platform_data *pdata)
 230 {
 231         int rc;
 232         int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
 233
 234         if (drvdata->flags & PLB_ACCESS_FLAG) {
 235                 /*
 236                  * Map the control registers in if the controller
 237                  * is on direct PLB interface.
 238                  */
 239                 if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
 240                         dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
 241                                 physaddr);
 242                         rc = -ENODEV;
 243                         goto err_region;
 244                 }
 245
 246                 drvdata->regs_phys = physaddr;
 247                 drvdata->regs = ioremap(physaddr, 8);
 248                 if (!drvdata->regs) {
 249                         dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
 250                                 physaddr);
 251                         rc = -ENODEV;
 252                         goto err_map;
 253                 }
 254         }
 255
 256         /* Allocate the framebuffer memory */
 257         if (pdata->fb_phys) {
 258                 drvdata->fb_phys = pdata->fb_phys;
 259                 drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize);
 260         } else {
 261                 drvdata->fb_alloced = 1;
 262                 drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize),
 263                                         &drvdata->fb_phys, GFP_KERNEL);
 264         }
 265
 266         if (!drvdata->fb_virt) {
 267                 dev_err(dev, "Could not allocate frame buffer memory\n");
 268                 rc = -ENOMEM;
 269                 if (drvdata->flags & PLB_ACCESS_FLAG)
 270                         goto err_fbmem;
 271                 else
 272                         goto err_region;
 273         }
 274
 275         /* Clear (turn to black) the framebuffer */
 276         memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
 277
 278         /* Tell the hardware where the frame buffer is */
 279         xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
 280
 281         /* Turn on the display */
 282         drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 283         if (pdata->rotate_screen)
 284                 drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
 285         xilinx_fb_out_be32(drvdata, REG_CTRL,
 286                                         drvdata->reg_ctrl_default);
 287
 288         /* Fill struct fb_info */
 289         drvdata->info.device = dev;
 290         drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
 291         drvdata->info.fbops = &xilinxfb_ops;
 292         drvdata->info.fix = xilinx_fb_fix;
 293         drvdata->info.fix.smem_start = drvdata->fb_phys;
 294         drvdata->info.fix.smem_len = fbsize;
 295         drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL;
 296
 297         drvdata->info.pseudo_palette = drvdata->pseudo_palette;
 298         drvdata->info.flags = FBINFO_DEFAULT;
 299         drvdata->info.var = xilinx_fb_var;
 300         drvdata->info.var.height = pdata->screen_height_mm;
 301         drvdata->info.var.width = pdata->screen_width_mm;
 302         drvdata->info.var.xres = pdata->xres;
 303         drvdata->info.var.yres = pdata->yres;
 304         drvdata->info.var.xres_virtual = pdata->xvirt;
 305         drvdata->info.var.yres_virtual = pdata->yvirt;
 306
 307         /* Allocate a colour map */
 308         rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
 309         if (rc) {
 310                 dev_err(dev, "Fail to allocate colormap (%d entries)\n",
 311                         PALETTE_ENTRIES_NO);
 312                 goto err_cmap;
 313         }
 314
 315         /* Register new frame buffer */
 316         rc = register_framebuffer(&drvdata->info);
 317         if (rc) {
 318                 dev_err(dev, "Could not register frame buffer\n");
 319                 goto err_regfb;
 320         }
 321
 322         if (drvdata->flags & PLB_ACCESS_FLAG) {
 323                 /* Put a banner in the log (for DEBUG) */
 324                 dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
 325                                         drvdata->regs);
 326         }
 327         /* Put a banner in the log (for DEBUG) */
 328         dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
 329                 (unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
 330
 331         return 0;       /* success */
 332
 333 err_regfb:
 334         fb_dealloc_cmap(&drvdata->info.cmap);
 335
 336 err_cmap:
 337         if (drvdata->fb_alloced)
 338                 dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
 339                         drvdata->fb_phys);
 340         else
 341                 iounmap(drvdata->fb_virt);
 342
 343         /* Turn off the display */
 344         xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 345
 346 err_fbmem:
 347         if (drvdata->flags & PLB_ACCESS_FLAG)
 348                 iounmap(drvdata->regs);
 349
 350 err_map:
 351         if (drvdata->flags & PLB_ACCESS_FLAG)
 352                 release_mem_region(physaddr, 8);
 353
 354 err_region:
 355         kfree(drvdata);
 356         dev_set_drvdata(dev, NULL);
 357
 358         return rc;
 359 }
 360
 361 static int xilinxfb_release(struct device *dev)
 362 {
 363         struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
 364
 365 #if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
 366         xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
 367 #endif
 368
 369         unregister_framebuffer(&drvdata->info);
 370
 371         fb_dealloc_cmap(&drvdata->info.cmap);
 372
 373         if (drvdata->fb_alloced)
 374                 dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
 375                                   drvdata->fb_virt, drvdata->fb_phys);
 376         else
 377                 iounmap(drvdata->fb_virt);
 378
 379         /* Turn off the display */
 380         xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 381
 382         /* Release the resources, as allocated based on interface */
 383         if (drvdata->flags & PLB_ACCESS_FLAG) {
 384                 iounmap(drvdata->regs);
 385                 release_mem_region(drvdata->regs_phys, 8);
 386         } else
 387                 dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
 388
 389         kfree(drvdata);
 390         dev_set_drvdata(dev, NULL);
 391
 392         return 0;
 393 }
 394
 395 /* ---------------------------------------------------------------------
 396  * OF bus binding
 397  */
 398
 399 static int __devinit
 400 xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 401 {
 402         const u32 *prop;
 403         u32 *p;
 404         u32 tft_access;
 405         struct xilinxfb_platform_data pdata;
 406         struct resource res;
 407         int size, rc, start;
 408         struct xilinxfb_drvdata *drvdata;
 409
 410         /* Copy with the default pdata (not a ptr reference!) */
 411         pdata = xilinx_fb_default_pdata;
 412
 413         dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
 414
 415         /* Allocate the driver data region */
 416         drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
 417         if (!drvdata) {
 418                 dev_err(&op->dev, "Couldn't allocate device private record\n");
 419                 return -ENOMEM;
 420         }
 421
 422         /*
 423          * To check whether the core is connected directly to DCR or PLB
 424          * interface and initialize the tft_access accordingly.
 425          */
 426         p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
 427         tft_access = p ? *p : 0;
 428
 429         /*
 430          * Fill the resource structure if its direct PLB interface
 431          * otherwise fill the dcr_host structure.
 432          */
 433         if (tft_access) {
 434                 drvdata->flags |= PLB_ACCESS_FLAG;
 435                 rc = of_address_to_resource(op->node, 0, &res);
 436                 if (rc) {
 437                         dev_err(&op->dev, "invalid address\n");
 438                         goto err;
 439                 }
 440         } else {
 441                 res.start = 0;
 442                 start = dcr_resource_start(op->node, 0);
 443                 drvdata->dcr_len = dcr_resource_len(op->node, 0);
 444                 drvdata->dcr_host = dcr_map(op->node, start, drvdata->dcr_len);
 445                 if (!DCR_MAP_OK(drvdata->dcr_host)) {
 446                         dev_err(&op->dev, "invalid DCR address\n");
 447                         goto err;
 448                 }
 449         }
 450
 451         prop = of_get_property(op->node, "phys-size", &size);
 452         if ((prop) && (size >= sizeof(u32)*2)) {
 453                 pdata.screen_width_mm = prop[0];
 454                 pdata.screen_height_mm = prop[1];
 455         }
 456
 457         prop = of_get_property(op->node, "resolution", &size);
 458         if ((prop) && (size >= sizeof(u32)*2)) {
 459                 pdata.xres = prop[0];
 460                 pdata.yres = prop[1];
 461         }
 462
 463         prop = of_get_property(op->node, "virtual-resolution", &size);
 464         if ((prop) && (size >= sizeof(u32)*2)) {
 465                 pdata.xvirt = prop[0];
 466                 pdata.yvirt = prop[1];
 467         }
 468
 469         if (of_find_property(op->node, "rotate-display", NULL))
 470                 pdata.rotate_screen = 1;
 471
 472         dev_set_drvdata(&op->dev, drvdata);
 473         return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
 474
 475  err:
 476         kfree(drvdata);
 477         return -ENODEV;
 478 }
 479
 480 static int __devexit xilinxfb_of_remove(struct of_device *op)
 481 {
 482         return xilinxfb_release(&op->dev);
 483 }
 484
 485 /* Match table for of_platform binding */
 486 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
 487         { .compatible = "xlnx,xps-tft-1.00.a", },
 488         { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
 489         { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 490         {},
 491 };
 492 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
 493
 494 static struct of_platform_driver xilinxfb_of_driver = {
 495         .owner = THIS_MODULE,
 496         .name = DRIVER_NAME,
 497         .match_table = xilinxfb_of_match,
 498         .probe = xilinxfb_of_probe,
 499         .remove = __devexit_p(xilinxfb_of_remove),
 500         .driver = {
 501                 .name = DRIVER_NAME,
 502         },
 503 };
 504
 505
 506 /* ---------------------------------------------------------------------
 507  * Module setup and teardown
 508  */
 509
 510 static int __init
 511 xilinxfb_init(void)
 512 {
 513         return of_register_platform_driver(&xilinxfb_of_driver);
 514 }
 515
 516 static void __exit
 517 xilinxfb_cleanup(void)
 518 {
 519         of_unregister_platform_driver(&xilinxfb_of_driver);
 520 }
 521
 522 module_init(xilinxfb_init);
 523 module_exit(xilinxfb_cleanup);
 524
 525 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 526 MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
 527 MODULE_LICENSE("GPL");