fs/Makefile

   1 # SPDX-License-Identifier: GPL-2.0
   2 #
   3 # Makefile for the Linux filesystems.
   4 #
   5 # 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
   6 # Rewritten to use lists instead of if-statements.
   7 #
   8
   9 obj-y :=        open.o read_write.o file_table.o super.o \
  10                 char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
  11                 ioctl.o readdir.o select.o dcache.o inode.o \
  12                 attr.o bad_inode.o file.o filesystems.o namespace.o \
  13                 seq_file.o xattr.o libfs.o fs-writeback.o \
  14                 pnode.o splice.o sync.o utimes.o d_path.o \
  15                 stack.o fs_struct.o statfs.o fs_pin.o nsfs.o
  16
  17 ifeq ($(CONFIG_BLOCK),y)
  18 obj-y +=        buffer.o block_dev.o direct-io.o mpage.o
  19 else
  20 obj-y +=        no-block.o
  21 endif
  22
  23 obj-$(CONFIG_PROC_FS) += proc_namespace.o
  24
  25 obj-y                           += notify/
  26 obj-$(CONFIG_EPOLL)             += eventpoll.o
  27 obj-$(CONFIG_ANON_INODES)       += anon_inodes.o
  28 obj-$(CONFIG_SIGNALFD)          += signalfd.o
  29 obj-$(CONFIG_TIMERFD)           += timerfd.o
  30 obj-$(CONFIG_EVENTFD)           += eventfd.o
  31 obj-$(CONFIG_USERFAULTFD)       += userfaultfd.o
  32 obj-$(CONFIG_AIO)               += aio.o
  33 obj-$(CONFIG_FS_DAX)            += dax.o
  34 obj-$(CONFIG_FS_ENCRYPTION)     += crypto/
  35 obj-$(CONFIG_FILE_LOCKING)      += locks.o
  36 obj-$(CONFIG_COMPAT)            += compat.o compat_ioctl.o
  37 obj-$(CONFIG_BINFMT_AOUT)       += binfmt_aout.o
  38 obj-$(CONFIG_BINFMT_EM86)       += binfmt_em86.o
  39 obj-$(CONFIG_BINFMT_MISC)       += binfmt_misc.o
  40 obj-$(CONFIG_BINFMT_SCRIPT)     += binfmt_script.o
  41 obj-$(CONFIG_BINFMT_ELF)        += binfmt_elf.o
  42 obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
  43 obj-$(CONFIG_BINFMT_ELF_FDPIC)  += binfmt_elf_fdpic.o
  44 obj-$(CONFIG_BINFMT_FLAT)       += binfmt_flat.o
  45
  46 obj-$(CONFIG_FS_MBCACHE)        += mbcache.o
  47 obj-$(CONFIG_FS_POSIX_ACL)      += posix_acl.o
  48 obj-$(CONFIG_NFS_COMMON)        += nfs_common/
  49 obj-$(CONFIG_COREDUMP)          += coredump.o
  50 obj-$(CONFIG_SYSCTL)            += drop_caches.o
  51
  52 obj-$(CONFIG_FHANDLE)           += fhandle.o
  53 obj-$(CONFIG_FS_IOMAP)          += iomap.o
  54
  55 obj-y                           += quota/
  56
  57 obj-$(CONFIG_PROC_FS)           += proc/
  58 obj-$(CONFIG_KERNFS)            += kernfs/
  59 obj-$(CONFIG_SYSFS)             += sysfs/
  60 obj-$(CONFIG_CONFIGFS_FS)       += configfs/
  61 obj-y                           += devpts/
  62
  63 obj-$(CONFIG_PROFILING)         += dcookies.o
  64 obj-$(CONFIG_DLM)               += dlm/
  65
  66 # Do not add any filesystems before this line
  67 obj-$(CONFIG_FSCACHE)           += fscache/
  68 obj-$(CONFIG_REISERFS_FS)       += reiserfs/
  69 obj-$(CONFIG_EXT4_FS)           += ext4/
  70 # We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
  71 # ext2 driver, which doesn't know about journalling!  Explicitly request ext2
  72 # by giving the rootfstype= parameter.
  73 obj-$(CONFIG_EXT2_FS)           += ext2/
  74 obj-$(CONFIG_JBD2)              += jbd2/
  75 obj-$(CONFIG_CRAMFS)            += cramfs/
  76 obj-$(CONFIG_SQUASHFS)          += squashfs/
  77 obj-y                           += ramfs/
  78 obj-$(CONFIG_HUGETLBFS)         += hugetlbfs/
  79 obj-$(CONFIG_CODA_FS)           += coda/
  80 obj-$(CONFIG_MINIX_FS)          += minix/
  81 obj-$(CONFIG_FAT_FS)            += fat/
  82 obj-$(CONFIG_BFS_FS)            += bfs/
  83 obj-$(CONFIG_ISO9660_FS)        += isofs/
  84 obj-$(CONFIG_HFSPLUS_FS)        += hfsplus/ # Before hfs to find wrapped HFS+
  85 obj-$(CONFIG_HFS_FS)            += hfs/
  86 obj-$(CONFIG_ECRYPT_FS)         += ecryptfs/
  87 obj-$(CONFIG_VXFS_FS)           += freevxfs/
  88 obj-$(CONFIG_NFS_FS)            += nfs/
  89 obj-$(CONFIG_EXPORTFS)          += exportfs/
  90 obj-$(CONFIG_NFSD)              += nfsd/
  91 obj-$(CONFIG_LOCKD)             += lockd/
  92 obj-$(CONFIG_NLS)               += nls/
  93 obj-$(CONFIG_SYSV_FS)           += sysv/
  94 obj-$(CONFIG_CIFS)              += cifs/
  95 obj-$(CONFIG_HPFS_FS)           += hpfs/
  96 obj-$(CONFIG_NTFS_FS)           += ntfs/
  97 obj-$(CONFIG_UFS_FS)            += ufs/
  98 obj-$(CONFIG_EFS_FS)            += efs/
  99 obj-$(CONFIG_JFFS2_FS)          += jffs2/
 100 obj-$(CONFIG_UBIFS_FS)          += ubifs/
 101 obj-$(CONFIG_AFFS_FS)           += affs/
 102 obj-$(CONFIG_ROMFS_FS)          += romfs/
 103 obj-$(CONFIG_QNX4FS_FS)         += qnx4/
 104 obj-$(CONFIG_QNX6FS_FS)         += qnx6/
 105 obj-$(CONFIG_AUTOFS_FS)         += autofs/
 106 obj-$(CONFIG_ADFS_FS)           += adfs/
 107 obj-$(CONFIG_FUSE_FS)           += fuse/
 108 obj-$(CONFIG_OVERLAY_FS)        += overlayfs/
 109 obj-$(CONFIG_ORANGEFS_FS)       += orangefs/
 110 obj-$(CONFIG_UDF_FS)            += udf/
 111 obj-$(CONFIG_SUN_OPENPROMFS)    += openpromfs/
 112 obj-$(CONFIG_OMFS_FS)           += omfs/
 113 obj-$(CONFIG_JFS_FS)            += jfs/
 114 obj-$(CONFIG_XFS_FS)            += xfs/
 115 obj-$(CONFIG_9P_FS)             += 9p/
 116 obj-$(CONFIG_AFS_FS)            += afs/
 117 obj-$(CONFIG_NILFS2_FS)         += nilfs2/
 118 obj-$(CONFIG_BEFS_FS)           += befs/
 119 obj-$(CONFIG_HOSTFS)            += hostfs/
 120 obj-$(CONFIG_CACHEFILES)        += cachefiles/
 121 obj-$(CONFIG_DEBUG_FS)          += debugfs/
 122 obj-$(CONFIG_TRACING)           += tracefs/
 123 obj-$(CONFIG_OCFS2_FS)          += ocfs2/
 124 obj-$(CONFIG_BTRFS_FS)          += btrfs/
 125 obj-$(CONFIG_GFS2_FS)           += gfs2/
 126 obj-$(CONFIG_F2FS_FS)           += f2fs/
 127 obj-y                           += exofs/ # Multiple modules
 128 obj-$(CONFIG_CEPH_FS)           += ceph/
 129 obj-$(CONFIG_PSTORE)            += pstore/
 130 obj-$(CONFIG_EFIVAR_FS)         += efivarfs/