hw/alpha_typhoon.c

   1 /*
   2  * DEC 21272 (TSUNAMI/TYPHOON) chipset emulation.
   3  *
   4  * Written by Richard Henderson.
   5  *
   6  * This work is licensed under the GNU GPL license version 2 or later.
   7  */
   8
   9 #include "cpu.h"
  10 #include "exec/exec-all.h"
  11 #include "hw.h"
  12 #include "devices.h"
  13 #include "sysemu.h"
  14 #include "alpha_sys.h"
  15 #include "exec/address-spaces.h"
  16
  17
  18 #define TYPE_TYPHOON_PCI_HOST_BRIDGE "typhoon-pcihost"
  19
  20 typedef struct TyphoonCchip {
  21     MemoryRegion region;
  22     uint64_t misc;
  23     uint64_t drir;
  24     uint64_t dim[4];
  25     uint32_t iic[4];
  26     CPUAlphaState *cpu[4];
  27 } TyphoonCchip;
  28
  29 typedef struct TyphoonWindow {
  30     uint32_t base_addr;
  31     uint32_t mask;
  32     uint32_t translated_base_pfn;
  33 } TyphoonWindow;
  34
  35 typedef struct TyphoonPchip {
  36     MemoryRegion region;
  37     MemoryRegion reg_iack;
  38     MemoryRegion reg_mem;
  39     MemoryRegion reg_io;
  40     MemoryRegion reg_conf;
  41     uint64_t ctl;
  42     TyphoonWindow win[4];
  43 } TyphoonPchip;
  44
  45 #define TYPHOON_PCI_HOST_BRIDGE(obj) \
  46     OBJECT_CHECK(TyphoonState, (obj), TYPE_TYPHOON_PCI_HOST_BRIDGE)
  47
  48 typedef struct TyphoonState {
  49     PCIHostState parent_obj;
  50
  51     TyphoonCchip cchip;
  52     TyphoonPchip pchip;
  53     MemoryRegion dchip_region;
  54     MemoryRegion ram_region;
  55
  56     /* QEMU emulation state.  */
  57     uint32_t latch_tmp;
  58 } TyphoonState;
  59
  60 /* Called when one of DRIR or DIM changes.  */
  61 static void cpu_irq_change(CPUAlphaState *env, uint64_t req)
  62 {
  63     /* If there are any non-masked interrupts, tell the cpu.  */
  64     if (env) {
  65         if (req) {
  66             cpu_interrupt(env, CPU_INTERRUPT_HARD);
  67         } else {
  68             cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
  69         }
  70     }
  71 }
  72
  73 static uint64_t cchip_read(void *opaque, hwaddr addr, unsigned size)
  74 {
  75     CPUAlphaState *env = cpu_single_env;
  76     TyphoonState *s = opaque;
  77     uint64_t ret = 0;
  78
  79     if (addr & 4) {
  80         return s->latch_tmp;
  81     }
  82
  83     switch (addr) {
  84     case 0x0000:
  85         /* CSC: Cchip System Configuration Register.  */
  86         /* All sorts of data here; probably the only thing relevant is
  87            PIP<14> Pchip 1 Present = 0.  */
  88         break;
  89
  90     case 0x0040:
  91         /* MTR: Memory Timing Register.  */
  92         /* All sorts of stuff related to real DRAM.  */
  93         break;
  94
  95     case 0x0080:
  96         /* MISC: Miscellaneous Register.  */
  97         ret = s->cchip.misc | (env->cpu_index & 3);
  98         break;
  99
 100     case 0x00c0:
 101         /* MPD: Memory Presence Detect Register.  */
 102         break;
 103
 104     case 0x0100: /* AAR0 */
 105     case 0x0140: /* AAR1 */
 106     case 0x0180: /* AAR2 */
 107     case 0x01c0: /* AAR3 */
 108         /* AAR: Array Address Register.  */
 109         /* All sorts of information about DRAM.  */
 110         break;
 111
 112     case 0x0200:
 113         /* DIM0: Device Interrupt Mask Register, CPU0.  */
 114         ret = s->cchip.dim[0];
 115         break;
 116     case 0x0240:
 117         /* DIM1: Device Interrupt Mask Register, CPU1.  */
 118         ret = s->cchip.dim[1];
 119         break;
 120     case 0x0280:
 121         /* DIR0: Device Interrupt Request Register, CPU0.  */
 122         ret = s->cchip.dim[0] & s->cchip.drir;
 123         break;
 124     case 0x02c0:
 125         /* DIR1: Device Interrupt Request Register, CPU1.  */
 126         ret = s->cchip.dim[1] & s->cchip.drir;
 127         break;
 128     case 0x0300:
 129         /* DRIR: Device Raw Interrupt Request Register.  */
 130         ret = s->cchip.drir;
 131         break;
 132
 133     case 0x0340:
 134         /* PRBEN: Probe Enable Register.  */
 135         break;
 136
 137     case 0x0380:
 138         /* IIC0: Interval Ignore Count Register, CPU0.  */
 139         ret = s->cchip.iic[0];
 140         break;
 141     case 0x03c0:
 142         /* IIC1: Interval Ignore Count Register, CPU1.  */
 143         ret = s->cchip.iic[1];
 144         break;
 145
 146     case 0x0400: /* MPR0 */
 147     case 0x0440: /* MPR1 */
 148     case 0x0480: /* MPR2 */
 149     case 0x04c0: /* MPR3 */
 150         /* MPR: Memory Programming Register.  */
 151         break;
 152
 153     case 0x0580:
 154         /* TTR: TIGbus Timing Register.  */
 155         /* All sorts of stuff related to interrupt delivery timings.  */
 156         break;
 157     case 0x05c0:
 158         /* TDR: TIGbug Device Timing Register.  */
 159         break;
 160
 161     case 0x0600:
 162         /* DIM2: Device Interrupt Mask Register, CPU2.  */
 163         ret = s->cchip.dim[2];
 164         break;
 165     case 0x0640:
 166         /* DIM3: Device Interrupt Mask Register, CPU3.  */
 167         ret = s->cchip.dim[3];
 168         break;
 169     case 0x0680:
 170         /* DIR2: Device Interrupt Request Register, CPU2.  */
 171         ret = s->cchip.dim[2] & s->cchip.drir;
 172         break;
 173     case 0x06c0:
 174         /* DIR3: Device Interrupt Request Register, CPU3.  */
 175         ret = s->cchip.dim[3] & s->cchip.drir;
 176         break;
 177
 178     case 0x0700:
 179         /* IIC2: Interval Ignore Count Register, CPU2.  */
 180         ret = s->cchip.iic[2];
 181         break;
 182     case 0x0740:
 183         /* IIC3: Interval Ignore Count Register, CPU3.  */
 184         ret = s->cchip.iic[3];
 185         break;
 186
 187     case 0x0780:
 188         /* PWR: Power Management Control.   */
 189         break;
 190
 191     case 0x0c00: /* CMONCTLA */
 192     case 0x0c40: /* CMONCTLB */
 193     case 0x0c80: /* CMONCNT01 */
 194     case 0x0cc0: /* CMONCNT23 */
 195         break;
 196
 197     default:
 198         cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
 199         return -1;
 200     }
 201
 202     s->latch_tmp = ret >> 32;
 203     return ret;
 204 }
 205
 206 static uint64_t dchip_read(void *opaque, hwaddr addr, unsigned size)
 207 {
 208     /* Skip this.  It's all related to DRAM timing and setup.  */
 209     return 0;
 210 }
 211
 212 static uint64_t pchip_read(void *opaque, hwaddr addr, unsigned size)
 213 {
 214     TyphoonState *s = opaque;
 215     uint64_t ret = 0;
 216
 217     if (addr & 4) {
 218         return s->latch_tmp;
 219     }
 220
 221     switch (addr) {
 222     case 0x0000:
 223         /* WSBA0: Window Space Base Address Register.  */
 224         ret = s->pchip.win[0].base_addr;
 225         break;
 226     case 0x0040:
 227         /* WSBA1 */
 228         ret = s->pchip.win[1].base_addr;
 229         break;
 230     case 0x0080:
 231         /* WSBA2 */
 232         ret = s->pchip.win[2].base_addr;
 233         break;
 234     case 0x00c0:
 235         /* WSBA3 */
 236         ret = s->pchip.win[3].base_addr;
 237         break;
 238
 239     case 0x0100:
 240         /* WSM0: Window Space Mask Register.  */
 241         ret = s->pchip.win[0].mask;
 242         break;
 243     case 0x0140:
 244         /* WSM1 */
 245         ret = s->pchip.win[1].mask;
 246         break;
 247     case 0x0180:
 248         /* WSM2 */
 249         ret = s->pchip.win[2].mask;
 250         break;
 251     case 0x01c0:
 252         /* WSM3 */
 253         ret = s->pchip.win[3].mask;
 254         break;
 255
 256     case 0x0200:
 257         /* TBA0: Translated Base Address Register.  */
 258         ret = (uint64_t)s->pchip.win[0].translated_base_pfn << 10;
 259         break;
 260     case 0x0240:
 261         /* TBA1 */
 262         ret = (uint64_t)s->pchip.win[1].translated_base_pfn << 10;
 263         break;
 264     case 0x0280:
 265         /* TBA2 */
 266         ret = (uint64_t)s->pchip.win[2].translated_base_pfn << 10;
 267         break;
 268     case 0x02c0:
 269         /* TBA3 */
 270         ret = (uint64_t)s->pchip.win[3].translated_base_pfn << 10;
 271         break;
 272
 273     case 0x0300:
 274         /* PCTL: Pchip Control Register.  */
 275         ret = s->pchip.ctl;
 276         break;
 277     case 0x0340:
 278         /* PLAT: Pchip Master Latency Register.  */
 279         break;
 280     case 0x03c0:
 281         /* PERROR: Pchip Error Register.  */
 282         break;
 283     case 0x0400:
 284         /* PERRMASK: Pchip Error Mask Register.  */
 285         break;
 286     case 0x0440:
 287         /* PERRSET: Pchip Error Set Register.  */
 288         break;
 289     case 0x0480:
 290         /* TLBIV: Translation Buffer Invalidate Virtual Register (WO).  */
 291         break;
 292     case 0x04c0:
 293         /* TLBIA: Translation Buffer Invalidate All Register (WO).  */
 294         break;
 295     case 0x0500: /* PMONCTL */
 296     case 0x0540: /* PMONCNT */
 297     case 0x0800: /* SPRST */
 298         break;
 299
 300     default:
 301         cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
 302         return -1;
 303     }
 304
 305     s->latch_tmp = ret >> 32;
 306     return ret;
 307 }
 308
 309 static void cchip_write(void *opaque, hwaddr addr,
 310                         uint64_t v32, unsigned size)
 311 {
 312     TyphoonState *s = opaque;
 313     uint64_t val, oldval, newval;
 314
 315     if (addr & 4) {
 316         val = v32 << 32 | s->latch_tmp;
 317         addr ^= 4;
 318     } else {
 319         s->latch_tmp = v32;
 320         return;
 321     }
 322
 323     switch (addr) {
 324     case 0x0000:
 325         /* CSC: Cchip System Configuration Register.  */
 326         /* All sorts of data here; nothing relevant RW.  */
 327         break;
 328
 329     case 0x0040:
 330         /* MTR: Memory Timing Register.  */
 331         /* All sorts of stuff related to real DRAM.  */
 332         break;
 333
 334     case 0x0080:
 335         /* MISC: Miscellaneous Register.  */
 336         newval = oldval = s->cchip.misc;
 337         newval &= ~(val & 0x10000ff0);     /* W1C fields */
 338         if (val & 0x100000) {
 339             newval &= ~0xff0000ull;        /* ACL clears ABT and ABW */
 340         } else {
 341             newval |= val & 0x00f00000;    /* ABT field is W1S */
 342             if ((newval & 0xf0000) == 0) {
 343                 newval |= val & 0xf0000;   /* ABW field is W1S iff zero */
 344             }
 345         }
 346         newval |= (val & 0xf000) >> 4;     /* IPREQ field sets IPINTR.  */
 347
 348         newval &= ~0xf0000000000ull;       /* WO and RW fields */
 349         newval |= val & 0xf0000000000ull;
 350         s->cchip.misc = newval;
 351
 352         /* Pass on changes to IPI and ITI state.  */
 353         if ((newval ^ oldval) & 0xff0) {
 354             int i;
 355             for (i = 0; i < 4; ++i) {
 356                 CPUAlphaState *env = s->cchip.cpu[i];
 357                 if (env) {
 358                     /* IPI can be either cleared or set by the write.  */
 359                     if (newval & (1 << (i + 8))) {
 360                         cpu_interrupt(env, CPU_INTERRUPT_SMP);
 361                     } else {
 362                         cpu_reset_interrupt(env, CPU_INTERRUPT_SMP);
 363                     }
 364
 365                     /* ITI can only be cleared by the write.  */
 366                     if ((newval & (1 << (i + 4))) == 0) {
 367                         cpu_reset_interrupt(env, CPU_INTERRUPT_TIMER);
 368                     }
 369                 }
 370             }
 371         }
 372         break;
 373
 374     case 0x00c0:
 375         /* MPD: Memory Presence Detect Register.  */
 376         break;
 377
 378     case 0x0100: /* AAR0 */
 379     case 0x0140: /* AAR1 */
 380     case 0x0180: /* AAR2 */
 381     case 0x01c0: /* AAR3 */
 382         /* AAR: Array Address Register.  */
 383         /* All sorts of information about DRAM.  */
 384         break;
 385
 386     case 0x0200: /* DIM0 */
 387         /* DIM: Device Interrupt Mask Register, CPU0.  */
 388         s->cchip.dim[0] = val;
 389         cpu_irq_change(s->cchip.cpu[0], val & s->cchip.drir);
 390         break;
 391     case 0x0240: /* DIM1 */
 392         /* DIM: Device Interrupt Mask Register, CPU1.  */
 393         s->cchip.dim[0] = val;
 394         cpu_irq_change(s->cchip.cpu[1], val & s->cchip.drir);
 395         break;
 396
 397     case 0x0280: /* DIR0 (RO) */
 398     case 0x02c0: /* DIR1 (RO) */
 399     case 0x0300: /* DRIR (RO) */
 400         break;
 401
 402     case 0x0340:
 403         /* PRBEN: Probe Enable Register.  */
 404         break;
 405
 406     case 0x0380: /* IIC0 */
 407         s->cchip.iic[0] = val & 0xffffff;
 408         break;
 409     case 0x03c0: /* IIC1 */
 410         s->cchip.iic[1] = val & 0xffffff;
 411         break;
 412
 413     case 0x0400: /* MPR0 */
 414     case 0x0440: /* MPR1 */
 415     case 0x0480: /* MPR2 */
 416     case 0x04c0: /* MPR3 */
 417         /* MPR: Memory Programming Register.  */
 418         break;
 419
 420     case 0x0580:
 421         /* TTR: TIGbus Timing Register.  */
 422         /* All sorts of stuff related to interrupt delivery timings.  */
 423         break;
 424     case 0x05c0:
 425         /* TDR: TIGbug Device Timing Register.  */
 426         break;
 427
 428     case 0x0600:
 429         /* DIM2: Device Interrupt Mask Register, CPU2.  */
 430         s->cchip.dim[2] = val;
 431         cpu_irq_change(s->cchip.cpu[2], val & s->cchip.drir);
 432         break;
 433     case 0x0640:
 434         /* DIM3: Device Interrupt Mask Register, CPU3.  */
 435         s->cchip.dim[3] = val;
 436         cpu_irq_change(s->cchip.cpu[3], val & s->cchip.drir);
 437         break;
 438
 439     case 0x0680: /* DIR2 (RO) */
 440     case 0x06c0: /* DIR3 (RO) */
 441         break;
 442
 443     case 0x0700: /* IIC2 */
 444         s->cchip.iic[2] = val & 0xffffff;
 445         break;
 446     case 0x0740: /* IIC3 */
 447         s->cchip.iic[3] = val & 0xffffff;
 448         break;
 449
 450     case 0x0780:
 451         /* PWR: Power Management Control.   */
 452         break;
 453
 454     case 0x0c00: /* CMONCTLA */
 455     case 0x0c40: /* CMONCTLB */
 456     case 0x0c80: /* CMONCNT01 */
 457     case 0x0cc0: /* CMONCNT23 */
 458         break;
 459
 460     default:
 461         cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
 462         return;
 463     }
 464 }
 465
 466 static void dchip_write(void *opaque, hwaddr addr,
 467                         uint64_t val, unsigned size)
 468 {
 469     /* Skip this.  It's all related to DRAM timing and setup.  */
 470 }
 471
 472 static void pchip_write(void *opaque, hwaddr addr,
 473                         uint64_t v32, unsigned size)
 474 {
 475     TyphoonState *s = opaque;
 476     uint64_t val, oldval;
 477
 478     if (addr & 4) {
 479         val = v32 << 32 | s->latch_tmp;
 480         addr ^= 4;
 481     } else {
 482         s->latch_tmp = v32;
 483         return;
 484     }
 485
 486     switch (addr) {
 487     case 0x0000:
 488         /* WSBA0: Window Space Base Address Register.  */
 489         s->pchip.win[0].base_addr = val;
 490         break;
 491     case 0x0040:
 492         /* WSBA1 */
 493         s->pchip.win[1].base_addr = val;
 494         break;
 495     case 0x0080:
 496         /* WSBA2 */
 497         s->pchip.win[2].base_addr = val;
 498         break;
 499     case 0x00c0:
 500         /* WSBA3 */
 501         s->pchip.win[3].base_addr = val;
 502         break;
 503
 504     case 0x0100:
 505         /* WSM0: Window Space Mask Register.  */
 506         s->pchip.win[0].mask = val;
 507         break;
 508     case 0x0140:
 509         /* WSM1 */
 510         s->pchip.win[1].mask = val;
 511         break;
 512     case 0x0180:
 513         /* WSM2 */
 514         s->pchip.win[2].mask = val;
 515         break;
 516     case 0x01c0:
 517         /* WSM3 */
 518         s->pchip.win[3].mask = val;
 519         break;
 520
 521     case 0x0200:
 522         /* TBA0: Translated Base Address Register.  */
 523         s->pchip.win[0].translated_base_pfn = val >> 10;
 524         break;
 525     case 0x0240:
 526         /* TBA1 */
 527         s->pchip.win[1].translated_base_pfn = val >> 10;
 528         break;
 529     case 0x0280:
 530         /* TBA2 */
 531         s->pchip.win[2].translated_base_pfn = val >> 10;
 532         break;
 533     case 0x02c0:
 534         /* TBA3 */
 535         s->pchip.win[3].translated_base_pfn = val >> 10;
 536         break;
 537
 538     case 0x0300:
 539         /* PCTL: Pchip Control Register.  */
 540         oldval = s->pchip.ctl;
 541         oldval &= ~0x00001cff0fc7ffull;       /* RW fields */
 542         oldval |= val & 0x00001cff0fc7ffull;
 543
 544         s->pchip.ctl = oldval;
 545         break;
 546
 547     case 0x0340:
 548         /* PLAT: Pchip Master Latency Register.  */
 549         break;
 550     case 0x03c0:
 551         /* PERROR: Pchip Error Register.  */
 552         break;
 553     case 0x0400:
 554         /* PERRMASK: Pchip Error Mask Register.  */
 555         break;
 556     case 0x0440:
 557         /* PERRSET: Pchip Error Set Register.  */
 558         break;
 559
 560     case 0x0480:
 561         /* TLBIV: Translation Buffer Invalidate Virtual Register.  */
 562         break;
 563
 564     case 0x04c0:
 565         /* TLBIA: Translation Buffer Invalidate All Register (WO).  */
 566         break;
 567
 568     case 0x0500:
 569         /* PMONCTL */
 570     case 0x0540:
 571         /* PMONCNT */
 572     case 0x0800:
 573         /* SPRST */
 574         break;
 575
 576     default:
 577         cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
 578         return;
 579     }
 580 }
 581
 582 static const MemoryRegionOps cchip_ops = {
 583     .read = cchip_read,
 584     .write = cchip_write,
 585     .endianness = DEVICE_LITTLE_ENDIAN,
 586     .valid = {
 587         .min_access_size = 4,  /* ??? Should be 8.  */
 588         .max_access_size = 8,
 589     },
 590     .impl = {
 591         .min_access_size = 4,
 592         .max_access_size = 4,
 593     },
 594 };
 595
 596 static const MemoryRegionOps dchip_ops = {
 597     .read = dchip_read,
 598     .write = dchip_write,
 599     .endianness = DEVICE_LITTLE_ENDIAN,
 600     .valid = {
 601         .min_access_size = 4,  /* ??? Should be 8.  */
 602         .max_access_size = 8,
 603     },
 604     .impl = {
 605         .min_access_size = 4,
 606         .max_access_size = 8,
 607     },
 608 };
 609
 610 static const MemoryRegionOps pchip_ops = {
 611     .read = pchip_read,
 612     .write = pchip_write,
 613     .endianness = DEVICE_LITTLE_ENDIAN,
 614     .valid = {
 615         .min_access_size = 4,  /* ??? Should be 8.  */
 616         .max_access_size = 8,
 617     },
 618     .impl = {
 619         .min_access_size = 4,
 620         .max_access_size = 4,
 621     },
 622 };
 623
 624 static void typhoon_set_irq(void *opaque, int irq, int level)
 625 {
 626     TyphoonState *s = opaque;
 627     uint64_t drir;
 628     int i;
 629
 630     /* Set/Reset the bit in CCHIP.DRIR based on IRQ+LEVEL.  */
 631     drir = s->cchip.drir;
 632     if (level) {
 633         drir |= 1ull << irq;
 634     } else {
 635         drir &= ~(1ull << irq);
 636     }
 637     s->cchip.drir = drir;
 638
 639     for (i = 0; i < 4; ++i) {
 640         cpu_irq_change(s->cchip.cpu[i], s->cchip.dim[i] & drir);
 641     }
 642 }
 643
 644 static void typhoon_set_isa_irq(void *opaque, int irq, int level)
 645 {
 646     typhoon_set_irq(opaque, 55, level);
 647 }
 648
 649 static void typhoon_set_timer_irq(void *opaque, int irq, int level)
 650 {
 651     TyphoonState *s = opaque;
 652     int i;
 653
 654     /* Thankfully, the mc146818rtc code doesn't track the IRQ state,
 655        and so we don't have to worry about missing interrupts just
 656        because we never actually ACK the interrupt.  Just ignore any
 657        case of the interrupt level going low.  */
 658     if (level == 0) {
 659         return;
 660     }
 661
 662     /* Deliver the interrupt to each CPU, considering each CPU's IIC.  */
 663     for (i = 0; i < 4; ++i) {
 664         CPUAlphaState *env = s->cchip.cpu[i];
 665         if (env) {
 666             uint32_t iic = s->cchip.iic[i];
 667
 668             /* ??? The verbage in Section 10.2.2.10 isn't 100% clear.
 669                Bit 24 is the OverFlow bit, RO, and set when the count
 670                decrements past 0.  When is OF cleared?  My guess is that
 671                OF is actually cleared when the IIC is written, and that
 672                the ICNT field always decrements.  At least, that's an
 673                interpretation that makes sense, and "allows the CPU to
 674                determine exactly how mant interval timer ticks were
 675                skipped".  At least within the next 4M ticks...  */
 676
 677             iic = ((iic - 1) & 0x1ffffff) | (iic & 0x1000000);
 678             s->cchip.iic[i] = iic;
 679
 680             if (iic & 0x1000000) {
 681                 /* Set the ITI bit for this cpu.  */
 682                 s->cchip.misc |= 1 << (i + 4);
 683                 /* And signal the interrupt.  */
 684                 cpu_interrupt(env, CPU_INTERRUPT_TIMER);
 685             }
 686         }
 687     }
 688 }
 689
 690 static void typhoon_alarm_timer(void *opaque)
 691 {
 692     TyphoonState *s = (TyphoonState *)((uintptr_t)opaque & ~3);
 693     int cpu = (uintptr_t)opaque & 3;
 694
 695     /* Set the ITI bit for this cpu.  */
 696     s->cchip.misc |= 1 << (cpu + 4);
 697     cpu_interrupt(s->cchip.cpu[cpu], CPU_INTERRUPT_TIMER);
 698 }
 699
 700 PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,
 701                      qemu_irq *p_rtc_irq,
 702                      CPUAlphaState *cpus[4], pci_map_irq_fn sys_map_irq)
 703 {
 704     const uint64_t MB = 1024 * 1024;
 705     const uint64_t GB = 1024 * MB;
 706     MemoryRegion *addr_space = get_system_memory();
 707     MemoryRegion *addr_space_io = get_system_io();
 708     DeviceState *dev;
 709     TyphoonState *s;
 710     PCIHostState *phb;
 711     PCIBus *b;
 712     int i;
 713
 714     dev = qdev_create(NULL, TYPE_TYPHOON_PCI_HOST_BRIDGE);
 715     qdev_init_nofail(dev);
 716
 717     s = TYPHOON_PCI_HOST_BRIDGE(dev);
 718     phb = PCI_HOST_BRIDGE(dev);
 719
 720     /* Remember the CPUs so that we can deliver interrupts to them.  */
 721     for (i = 0; i < 4; i++) {
 722         CPUAlphaState *env = cpus[i];
 723         s->cchip.cpu[i] = env;
 724         if (env) {
 725             env->alarm_timer = qemu_new_timer_ns(rtc_clock,
 726                                                  typhoon_alarm_timer,
 727                                                  (void *)((uintptr_t)s + i));
 728         }
 729     }
 730
 731     *p_rtc_irq = *qemu_allocate_irqs(typhoon_set_timer_irq, s, 1);
 732
 733     /* Main memory region, 0x00.0000.0000.  Real hardware supports 32GB,
 734        but the address space hole reserved at this point is 8TB.  */
 735     memory_region_init_ram(&s->ram_region, "ram", ram_size);
 736     vmstate_register_ram_global(&s->ram_region);
 737     memory_region_add_subregion(addr_space, 0, &s->ram_region);
 738
 739     /* TIGbus, 0x801.0000.0000, 1GB.  */
 740     /* ??? The TIGbus is used for delivering interrupts, and access to
 741        the flash ROM.  I'm not sure that we need to implement it at all.  */
 742
 743     /* Pchip0 CSRs, 0x801.8000.0000, 256MB.  */
 744     memory_region_init_io(&s->pchip.region, &pchip_ops, s, "pchip0", 256*MB);
 745     memory_region_add_subregion(addr_space, 0x80180000000ULL,
 746                                 &s->pchip.region);
 747
 748     /* Cchip CSRs, 0x801.A000.0000, 256MB.  */
 749     memory_region_init_io(&s->cchip.region, &cchip_ops, s, "cchip0", 256*MB);
 750     memory_region_add_subregion(addr_space, 0x801a0000000ULL,
 751                                 &s->cchip.region);
 752
 753     /* Dchip CSRs, 0x801.B000.0000, 256MB.  */
 754     memory_region_init_io(&s->dchip_region, &dchip_ops, s, "dchip0", 256*MB);
 755     memory_region_add_subregion(addr_space, 0x801b0000000ULL,
 756                                 &s->dchip_region);
 757
 758     /* Pchip0 PCI memory, 0x800.0000.0000, 4GB.  */
 759     memory_region_init(&s->pchip.reg_mem, "pci0-mem", 4*GB);
 760     memory_region_add_subregion(addr_space, 0x80000000000ULL,
 761                                 &s->pchip.reg_mem);
 762
 763     /* Pchip0 PCI I/O, 0x801.FC00.0000, 32MB.  */
 764     /* ??? Ideally we drop the "system" i/o space on the floor and give the
 765        PCI subsystem the full address space reserved by the chipset.
 766        We can't do that until the MEM and IO paths in memory.c are unified.  */
 767     memory_region_init_io(&s->pchip.reg_io, &alpha_pci_bw_io_ops, NULL,
 768                           "pci0-io", 32*MB);
 769     memory_region_add_subregion(addr_space, 0x801fc000000ULL,
 770                                 &s->pchip.reg_io);
 771
 772     b = pci_register_bus(dev, "pci",
 773                          typhoon_set_irq, sys_map_irq, s,
 774                          &s->pchip.reg_mem, addr_space_io, 0, 64);
 775     phb->bus = b;
 776
 777     /* Pchip0 PCI special/interrupt acknowledge, 0x801.F800.0000, 64MB.  */
 778     memory_region_init_io(&s->pchip.reg_iack, &alpha_pci_iack_ops, b,
 779                           "pci0-iack", 64*MB);
 780     memory_region_add_subregion(addr_space, 0x801f8000000ULL,
 781                                 &s->pchip.reg_iack);
 782
 783     /* Pchip0 PCI configuration, 0x801.FE00.0000, 16MB.  */
 784     memory_region_init_io(&s->pchip.reg_conf, &alpha_pci_conf1_ops, b,
 785                           "pci0-conf", 16*MB);
 786     memory_region_add_subregion(addr_space, 0x801fe000000ULL,
 787                                 &s->pchip.reg_conf);
 788
 789     /* For the record, these are the mappings for the second PCI bus.
 790        We can get away with not implementing them because we indicate
 791        via the Cchip.CSC<PIP> bit that Pchip1 is not present.  */
 792     /* Pchip1 PCI memory, 0x802.0000.0000, 4GB.  */
 793     /* Pchip1 CSRs, 0x802.8000.0000, 256MB.  */
 794     /* Pchip1 PCI special/interrupt acknowledge, 0x802.F800.0000, 64MB.  */
 795     /* Pchip1 PCI I/O, 0x802.FC00.0000, 32MB.  */
 796     /* Pchip1 PCI configuration, 0x802.FE00.0000, 16MB.  */
 797
 798     /* Init the ISA bus.  */
 799     /* ??? Technically there should be a cy82c693ub pci-isa bridge.  */
 800     {
 801         qemu_irq isa_pci_irq, *isa_irqs;
 802
 803         *isa_bus = isa_bus_new(NULL, addr_space_io);
 804         isa_pci_irq = *qemu_allocate_irqs(typhoon_set_isa_irq, s, 1);
 805         isa_irqs = i8259_init(*isa_bus, isa_pci_irq);
 806         isa_bus_irqs(*isa_bus, isa_irqs);
 807     }
 808
 809     return b;
 810 }
 811
 812 static int typhoon_pcihost_init(SysBusDevice *dev)
 813 {
 814     return 0;
 815 }
 816
 817 static void typhoon_pcihost_class_init(ObjectClass *klass, void *data)
 818 {
 819     DeviceClass *dc = DEVICE_CLASS(klass);
 820     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 821
 822     k->init = typhoon_pcihost_init;
 823     dc->no_user = 1;
 824 }
 825
 826 static const TypeInfo typhoon_pcihost_info = {
 827     .name          = TYPE_TYPHOON_PCI_HOST_BRIDGE,
 828     .parent        = TYPE_PCI_HOST_BRIDGE,
 829     .instance_size = sizeof(TyphoonState),
 830     .class_init    = typhoon_pcihost_class_init,
 831 };
 832
 833 static void typhoon_register_types(void)
 834 {
 835     type_register_static(&typhoon_pcihost_info);
 836 }
 837
 838 type_init(typhoon_register_types)