]> git.proxmox.com Git - mirror_qemu.git/blob - hw/arm/nseries.c
projects / mirror_qemu.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
[mirror_qemu.git] / hw / arm / nseries.c
1 /*
2 * Nokia N-series internet tablets.
3 *
4 * Copyright (C) 2007 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21 #include "qemu/osdep.h"
22 #include "qapi/error.h"
23 #include "qemu/cutils.h"
24 #include "sysemu/sysemu.h"
25 #include "hw/arm/omap.h"
26 #include "hw/arm/arm.h"
27 #include "hw/irq.h"
28 #include "ui/console.h"
29 #include "hw/boards.h"
30 #include "hw/i2c/i2c.h"
31 #include "hw/devices.h"
32 #include "hw/block/flash.h"
33 #include "hw/hw.h"
34 #include "hw/bt.h"
35 #include "hw/loader.h"
36 #include "sysemu/block-backend.h"
37 #include "hw/sysbus.h"
38 #include "exec/address-spaces.h"
39
40 /* Nokia N8x0 support */
41 struct n800_s {
42 struct omap_mpu_state_s *mpu;
43
44 struct rfbi_chip_s blizzard;
45 struct {
46 void *opaque;
47 uint32_t (*txrx)(void *opaque, uint32_t value, int len);
48 uWireSlave *chip;
49 } ts;
50
51 int keymap[0x80];
52 DeviceState *kbd;
53
54 DeviceState *usb;
55 void *retu;
56 void *tahvo;
57 DeviceState *nand;
58 };
59
60 /* GPIO pins */
61 #define N8X0_TUSB_ENABLE_GPIO 0
62 #define N800_MMC2_WP_GPIO 8
63 #define N800_UNKNOWN_GPIO0 9 /* out */
64 #define N810_MMC2_VIOSD_GPIO 9
65 #define N810_HEADSET_AMP_GPIO 10
66 #define N800_CAM_TURN_GPIO 12
67 #define N810_GPS_RESET_GPIO 12
68 #define N800_BLIZZARD_POWERDOWN_GPIO 15
69 #define N800_MMC1_WP_GPIO 23
70 #define N810_MMC2_VSD_GPIO 23
71 #define N8X0_ONENAND_GPIO 26
72 #define N810_BLIZZARD_RESET_GPIO 30
73 #define N800_UNKNOWN_GPIO2 53 /* out */
74 #define N8X0_TUSB_INT_GPIO 58
75 #define N8X0_BT_WKUP_GPIO 61
76 #define N8X0_STI_GPIO 62
77 #define N8X0_CBUS_SEL_GPIO 64
78 #define N8X0_CBUS_DAT_GPIO 65
79 #define N8X0_CBUS_CLK_GPIO 66
80 #define N8X0_WLAN_IRQ_GPIO 87
81 #define N8X0_BT_RESET_GPIO 92
82 #define N8X0_TEA5761_CS_GPIO 93
83 #define N800_UNKNOWN_GPIO 94
84 #define N810_TSC_RESET_GPIO 94
85 #define N800_CAM_ACT_GPIO 95
86 #define N810_GPS_WAKEUP_GPIO 95
87 #define N8X0_MMC_CS_GPIO 96
88 #define N8X0_WLAN_PWR_GPIO 97
89 #define N8X0_BT_HOST_WKUP_GPIO 98
90 #define N810_SPEAKER_AMP_GPIO 101
91 #define N810_KB_LOCK_GPIO 102
92 #define N800_TSC_TS_GPIO 103
93 #define N810_TSC_TS_GPIO 106
94 #define N8X0_HEADPHONE_GPIO 107
95 #define N8X0_RETU_GPIO 108
96 #define N800_TSC_KP_IRQ_GPIO 109
97 #define N810_KEYBOARD_GPIO 109
98 #define N800_BAT_COVER_GPIO 110
99 #define N810_SLIDE_GPIO 110
100 #define N8X0_TAHVO_GPIO 111
101 #define N800_UNKNOWN_GPIO4 112 /* out */
102 #define N810_SLEEPX_LED_GPIO 112
103 #define N800_TSC_RESET_GPIO 118 /* ? */
104 #define N810_AIC33_RESET_GPIO 118
105 #define N800_TSC_UNKNOWN_GPIO 119 /* out */
106 #define N8X0_TMP105_GPIO 125
107
108 /* Config */
109 #define BT_UART 0
110 #define XLDR_LL_UART 1
111
112 /* Addresses on the I2C bus 0 */
113 #define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */
114 #define N8X0_TCM825x_ADDR 0x29 /* Camera */
115 #define N810_LP5521_ADDR 0x32 /* LEDs */
116 #define N810_TSL2563_ADDR 0x3d /* Light sensor */
117 #define N810_LM8323_ADDR 0x45 /* Keyboard */
118 /* Addresses on the I2C bus 1 */
119 #define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */
120 #define N8X0_MENELAUS_ADDR 0x72 /* Power management */
121
122 /* Chipselects on GPMC NOR interface */
123 #define N8X0_ONENAND_CS 0
124 #define N8X0_USB_ASYNC_CS 1
125 #define N8X0_USB_SYNC_CS 4
126
127 #define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
128
129 static void n800_mmc_cs_cb(void *opaque, int line, int level)
130 {
131 /* TODO: this seems to actually be connected to the menelaus, to
132 * which also both MMC slots connect. */
133 omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
134 }
135
136 static void n8x0_gpio_setup(struct n800_s *s)
137 {
138 qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
139 qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
140 qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
141 }
142
143 #define MAEMO_CAL_HEADER(...) \
144 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \
145 __VA_ARGS__, \
146 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
147
148 static const uint8_t n8x0_cal_wlan_mac[] = {
149 MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
150 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
151 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
152 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
153 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
154 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
155 };
156
157 static const uint8_t n8x0_cal_bt_id[] = {
158 MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
159 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
160 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
161 N8X0_BD_ADDR,
162 };
163
164 static void n8x0_nand_setup(struct n800_s *s)
165 {
166 char *otp_region;
167 DriveInfo *dinfo;
168
169 s->nand = qdev_create(NULL, "onenand");
170 qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
171 /* Either 0x40 or 0x48 are OK for the device ID */
172 qdev_prop_set_uint16(s->nand, "device_id", 0x48);
173 qdev_prop_set_uint16(s->nand, "version_id", 0);
174 qdev_prop_set_int32(s->nand, "shift", 1);
175 dinfo = drive_get(IF_MTD, 0, 0);
176 if (dinfo) {
177 qdev_prop_set_drive(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
178 &error_fatal);
179 }
180 qdev_init_nofail(s->nand);
181 sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
182 qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
183 omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
184 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
185 otp_region = onenand_raw_otp(s->nand);
186
187 memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
188 memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
189 /* XXX: in theory should also update the OOB for both pages */
190 }
191
192 static qemu_irq n8x0_system_powerdown;
193
194 static void n8x0_powerdown_req(Notifier *n, void *opaque)
195 {
196 qemu_irq_raise(n8x0_system_powerdown);
197 }
198
199 static Notifier n8x0_system_powerdown_notifier = {
200 .notify = n8x0_powerdown_req
201 };
202
203 static void n8x0_i2c_setup(struct n800_s *s)
204 {
205 DeviceState *dev;
206 qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
207 I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
208
209 /* Attach a menelaus PM chip */
210 dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
211 qdev_connect_gpio_out(dev, 3,
212 qdev_get_gpio_in(s->mpu->ih[0],
213 OMAP_INT_24XX_SYS_NIRQ));
214
215 n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
216 qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
217
218 /* Attach a TMP105 PM chip (A0 wired to ground) */
219 dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR);
220 qdev_connect_gpio_out(dev, 0, tmp_irq);
221 }
222
223 /* Touchscreen and keypad controller */
224 static MouseTransformInfo n800_pointercal = {
225 .x = 800,
226 .y = 480,
227 .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
228 };
229
230 static MouseTransformInfo n810_pointercal = {
231 .x = 800,
232 .y = 480,
233 .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
234 };
235
236 #define RETU_KEYCODE 61 /* F3 */
237
238 static void n800_key_event(void *opaque, int keycode)
239 {
240 struct n800_s *s = (struct n800_s *) opaque;
241 int code = s->keymap[keycode & 0x7f];
242
243 if (code == -1) {
244 if ((keycode & 0x7f) == RETU_KEYCODE) {
245 retu_key_event(s->retu, !(keycode & 0x80));
246 }
247 return;
248 }
249
250 tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
251 }
252
253 static const int n800_keys[16] = {
254 -1,
255 72, /* Up */
256 63, /* Home (F5) */
257 -1,
258 75, /* Left */
259 28, /* Enter */
260 77, /* Right */
261 -1,
262 1, /* Cycle (ESC) */
263 80, /* Down */
264 62, /* Menu (F4) */
265 -1,
266 66, /* Zoom- (F8) */
267 64, /* FullScreen (F6) */
268 65, /* Zoom+ (F7) */
269 -1,
270 };
271
272 static void n800_tsc_kbd_setup(struct n800_s *s)
273 {
274 int i;
275
276 /* XXX: are the three pins inverted inside the chip between the
277 * tsc and the cpu (N4111)? */
278 qemu_irq penirq = NULL; /* NC */
279 qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
280 qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
281
282 s->ts.chip = tsc2301_init(penirq, kbirq, dav);
283 s->ts.opaque = s->ts.chip->opaque;
284 s->ts.txrx = tsc210x_txrx;
285
286 for (i = 0; i < 0x80; i++) {
287 s->keymap[i] = -1;
288 }
289 for (i = 0; i < 0x10; i++) {
290 if (n800_keys[i] >= 0) {
291 s->keymap[n800_keys[i]] = i;
292 }
293 }
294
295 qemu_add_kbd_event_handler(n800_key_event, s);
296
297 tsc210x_set_transform(s->ts.chip, &n800_pointercal);
298 }
299
300 static void n810_tsc_setup(struct n800_s *s)
301 {
302 qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
303
304 s->ts.opaque = tsc2005_init(pintdav);
305 s->ts.txrx = tsc2005_txrx;
306
307 tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
308 }
309
310 /* N810 Keyboard controller */
311 static void n810_key_event(void *opaque, int keycode)
312 {
313 struct n800_s *s = (struct n800_s *) opaque;
314 int code = s->keymap[keycode & 0x7f];
315
316 if (code == -1) {
317 if ((keycode & 0x7f) == RETU_KEYCODE) {
318 retu_key_event(s->retu, !(keycode & 0x80));
319 }
320 return;
321 }
322
323 lm832x_key_event(s->kbd, code, !(keycode & 0x80));
324 }
325
326 #define M 0
327
328 static int n810_keys[0x80] = {
329 [0x01] = 16, /* Q */
330 [0x02] = 37, /* K */
331 [0x03] = 24, /* O */
332 [0x04] = 25, /* P */
333 [0x05] = 14, /* Backspace */
334 [0x06] = 30, /* A */
335 [0x07] = 31, /* S */
336 [0x08] = 32, /* D */
337 [0x09] = 33, /* F */
338 [0x0a] = 34, /* G */
339 [0x0b] = 35, /* H */
340 [0x0c] = 36, /* J */
341
342 [0x11] = 17, /* W */
343 [0x12] = 62, /* Menu (F4) */
344 [0x13] = 38, /* L */
345 [0x14] = 40, /* ' (Apostrophe) */
346 [0x16] = 44, /* Z */
347 [0x17] = 45, /* X */
348 [0x18] = 46, /* C */
349 [0x19] = 47, /* V */
350 [0x1a] = 48, /* B */
351 [0x1b] = 49, /* N */
352 [0x1c] = 42, /* Shift (Left shift) */
353 [0x1f] = 65, /* Zoom+ (F7) */
354
355 [0x21] = 18, /* E */
356 [0x22] = 39, /* ; (Semicolon) */
357 [0x23] = 12, /* - (Minus) */
358 [0x24] = 13, /* = (Equal) */
359 [0x2b] = 56, /* Fn (Left Alt) */
360 [0x2c] = 50, /* M */
361 [0x2f] = 66, /* Zoom- (F8) */
362
363 [0x31] = 19, /* R */
364 [0x32] = 29 | M, /* Right Ctrl */
365 [0x34] = 57, /* Space */
366 [0x35] = 51, /* , (Comma) */
367 [0x37] = 72 | M, /* Up */
368 [0x3c] = 82 | M, /* Compose (Insert) */
369 [0x3f] = 64, /* FullScreen (F6) */
370
371 [0x41] = 20, /* T */
372 [0x44] = 52, /* . (Dot) */
373 [0x46] = 77 | M, /* Right */
374 [0x4f] = 63, /* Home (F5) */
375 [0x51] = 21, /* Y */
376 [0x53] = 80 | M, /* Down */
377 [0x55] = 28, /* Enter */
378 [0x5f] = 1, /* Cycle (ESC) */
379
380 [0x61] = 22, /* U */
381 [0x64] = 75 | M, /* Left */
382
383 [0x71] = 23, /* I */
384 #if 0
385 [0x75] = 28 | M, /* KP Enter (KP Enter) */
386 #else
387 [0x75] = 15, /* KP Enter (Tab) */
388 #endif
389 };
390
391 #undef M
392
393 static void n810_kbd_setup(struct n800_s *s)
394 {
395 qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
396 int i;
397
398 for (i = 0; i < 0x80; i++) {
399 s->keymap[i] = -1;
400 }
401 for (i = 0; i < 0x80; i++) {
402 if (n810_keys[i] > 0) {
403 s->keymap[n810_keys[i]] = i;
404 }
405 }
406
407 qemu_add_kbd_event_handler(n810_key_event, s);
408
409 /* Attach the LM8322 keyboard to the I2C bus,
410 * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
411 s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
412 "lm8323", N810_LM8323_ADDR);
413 qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
414 }
415
416 /* LCD MIPI DBI-C controller (URAL) */
417 struct mipid_s {
418 int resp[4];
419 int param[4];
420 int p;
421 int pm;
422 int cmd;
423
424 int sleep;
425 int booster;
426 int te;
427 int selfcheck;
428 int partial;
429 int normal;
430 int vscr;
431 int invert;
432 int onoff;
433 int gamma;
434 uint32_t id;
435 };
436
437 static void mipid_reset(struct mipid_s *s)
438 {
439 s->pm = 0;
440 s->cmd = 0;
441
442 s->sleep = 1;
443 s->booster = 0;
444 s->selfcheck =
445 (1 << 7) | /* Register loading OK. */
446 (1 << 5) | /* The chip is attached. */
447 (1 << 4); /* Display glass still in one piece. */
448 s->te = 0;
449 s->partial = 0;
450 s->normal = 1;
451 s->vscr = 0;
452 s->invert = 0;
453 s->onoff = 1;
454 s->gamma = 0;
455 }
456
457 static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
458 {
459 struct mipid_s *s = (struct mipid_s *) opaque;
460 uint8_t ret;
461
462 if (len > 9) {
463 hw_error("%s: FIXME: bad SPI word width %i\n", __FUNCTION__, len);
464 }
465
466 if (s->p >= ARRAY_SIZE(s->resp)) {
467 ret = 0;
468 } else {
469 ret = s->resp[s->p++];
470 }
471 if (s->pm-- > 0) {
472 s->param[s->pm] = cmd;
473 } else {
474 s->cmd = cmd;
475 }
476
477 switch (s->cmd) {
478 case 0x00: /* NOP */
479 break;
480
481 case 0x01: /* SWRESET */
482 mipid_reset(s);
483 break;
484
485 case 0x02: /* BSTROFF */
486 s->booster = 0;
487 break;
488 case 0x03: /* BSTRON */
489 s->booster = 1;
490 break;
491
492 case 0x04: /* RDDID */
493 s->p = 0;
494 s->resp[0] = (s->id >> 16) & 0xff;
495 s->resp[1] = (s->id >> 8) & 0xff;
496 s->resp[2] = (s->id >> 0) & 0xff;
497 break;
498
499 case 0x06: /* RD_RED */
500 case 0x07: /* RD_GREEN */
501 /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
502 * for the bootloader one needs to change this. */
503 case 0x08: /* RD_BLUE */
504 s->p = 0;
505 /* TODO: return first pixel components */
506 s->resp[0] = 0x01;
507 break;
508
509 case 0x09: /* RDDST */
510 s->p = 0;
511 s->resp[0] = s->booster << 7;
512 s->resp[1] = (5 << 4) | (s->partial << 2) |
513 (s->sleep << 1) | s->normal;
514 s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
515 (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
516 s->resp[3] = s->gamma << 6;
517 break;
518
519 case 0x0a: /* RDDPM */
520 s->p = 0;
521 s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
522 (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
523 break;
524 case 0x0b: /* RDDMADCTR */
525 s->p = 0;
526 s->resp[0] = 0;
527 break;
528 case 0x0c: /* RDDCOLMOD */
529 s->p = 0;
530 s->resp[0] = 5; /* 65K colours */
531 break;
532 case 0x0d: /* RDDIM */
533 s->p = 0;
534 s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
535 break;
536 case 0x0e: /* RDDSM */
537 s->p = 0;
538 s->resp[0] = s->te << 7;
539 break;
540 case 0x0f: /* RDDSDR */
541 s->p = 0;
542 s->resp[0] = s->selfcheck;
543 break;
544
545 case 0x10: /* SLPIN */
546 s->sleep = 1;
547 break;
548 case 0x11: /* SLPOUT */
549 s->sleep = 0;
550 s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */
551 break;
552
553 case 0x12: /* PTLON */
554 s->partial = 1;
555 s->normal = 0;
556 s->vscr = 0;
557 break;
558 case 0x13: /* NORON */
559 s->partial = 0;
560 s->normal = 1;
561 s->vscr = 0;
562 break;
563
564 case 0x20: /* INVOFF */
565 s->invert = 0;
566 break;
567 case 0x21: /* INVON */
568 s->invert = 1;
569 break;
570
571 case 0x22: /* APOFF */
572 case 0x23: /* APON */
573 goto bad_cmd;
574
575 case 0x25: /* WRCNTR */
576 if (s->pm < 0) {
577 s->pm = 1;
578 }
579 goto bad_cmd;
580
581 case 0x26: /* GAMSET */
582 if (!s->pm) {
583 s->gamma = ctz32(s->param[0] & 0xf);
584 if (s->gamma == 32) {
585 s->gamma = -1; /* XXX: should this be 0? */
586 }
587 } else if (s->pm < 0) {
588 s->pm = 1;
589 }
590 break;
591
592 case 0x28: /* DISPOFF */
593 s->onoff = 0;
594 break;
595 case 0x29: /* DISPON */
596 s->onoff = 1;
597 break;
598
599 case 0x2a: /* CASET */
600 case 0x2b: /* RASET */
601 case 0x2c: /* RAMWR */
602 case 0x2d: /* RGBSET */
603 case 0x2e: /* RAMRD */
604 case 0x30: /* PTLAR */
605 case 0x33: /* SCRLAR */
606 goto bad_cmd;
607
608 case 0x34: /* TEOFF */
609 s->te = 0;
610 break;
611 case 0x35: /* TEON */
612 if (!s->pm) {
613 s->te = 1;
614 } else if (s->pm < 0) {
615 s->pm = 1;
616 }
617 break;
618
619 case 0x36: /* MADCTR */
620 goto bad_cmd;
621
622 case 0x37: /* VSCSAD */
623 s->partial = 0;
624 s->normal = 0;
625 s->vscr = 1;
626 break;
627
628 case 0x38: /* IDMOFF */
629 case 0x39: /* IDMON */
630 case 0x3a: /* COLMOD */
631 goto bad_cmd;
632
633 case 0xb0: /* CLKINT / DISCTL */
634 case 0xb1: /* CLKEXT */
635 if (s->pm < 0) {
636 s->pm = 2;
637 }
638 break;
639
640 case 0xb4: /* FRMSEL */
641 break;
642
643 case 0xb5: /* FRM8SEL */
644 case 0xb6: /* TMPRNG / INIESC */
645 case 0xb7: /* TMPHIS / NOP2 */
646 case 0xb8: /* TMPREAD / MADCTL */
647 case 0xba: /* DISTCTR */
648 case 0xbb: /* EPVOL */
649 goto bad_cmd;
650
651 case 0xbd: /* Unknown */
652 s->p = 0;
653 s->resp[0] = 0;
654 s->resp[1] = 1;
655 break;
656
657 case 0xc2: /* IFMOD */
658 if (s->pm < 0) {
659 s->pm = 2;
660 }
661 break;
662
663 case 0xc6: /* PWRCTL */
664 case 0xc7: /* PPWRCTL */
665 case 0xd0: /* EPWROUT */
666 case 0xd1: /* EPWRIN */
667 case 0xd4: /* RDEV */
668 case 0xd5: /* RDRR */
669 goto bad_cmd;
670
671 case 0xda: /* RDID1 */
672 s->p = 0;
673 s->resp[0] = (s->id >> 16) & 0xff;
674 break;
675 case 0xdb: /* RDID2 */
676 s->p = 0;
677 s->resp[0] = (s->id >> 8) & 0xff;
678 break;
679 case 0xdc: /* RDID3 */
680 s->p = 0;
681 s->resp[0] = (s->id >> 0) & 0xff;
682 break;
683
684 default:
685 bad_cmd:
686 qemu_log_mask(LOG_GUEST_ERROR,
687 "%s: unknown command %02x\n", __func__, s->cmd);
688 break;
689 }
690
691 return ret;
692 }
693
694 static void *mipid_init(void)
695 {
696 struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s));
697
698 s->id = 0x838f03;
699 mipid_reset(s);
700
701 return s;
702 }
703
704 static void n8x0_spi_setup(struct n800_s *s)
705 {
706 void *tsc = s->ts.opaque;
707 void *mipid = mipid_init();
708
709 omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
710 omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
711 }
712
713 /* This task is normally performed by the bootloader. If we're loading
714 * a kernel directly, we need to enable the Blizzard ourselves. */
715 static void n800_dss_init(struct rfbi_chip_s *chip)
716 {
717 uint8_t *fb_blank;
718
719 chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */
720 chip->write(chip->opaque, 1, 0x64);
721 chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */
722 chip->write(chip->opaque, 1, 0x1e);
723 chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */
724 chip->write(chip->opaque, 1, 0xe0);
725 chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */
726 chip->write(chip->opaque, 1, 0x01);
727 chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */
728 chip->write(chip->opaque, 1, 0x06);
729 chip->write(chip->opaque, 0, 0x68); /* Display Mode register */
730 chip->write(chip->opaque, 1, 1); /* Enable bit */
731
732 chip->write(chip->opaque, 0, 0x6c);
733 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
734 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
735 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
736 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
737 chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */
738 chip->write(chip->opaque, 1, 0x03); /* Input X End Position */
739 chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */
740 chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */
741 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
742 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
743 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
744 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
745 chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */
746 chip->write(chip->opaque, 1, 0x03); /* Output X End Position */
747 chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */
748 chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */
749 chip->write(chip->opaque, 1, 0x01); /* Input Data Format */
750 chip->write(chip->opaque, 1, 0x01); /* Data Source Select */
751
752 fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
753 /* Display Memory Data Port */
754 chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
755 g_free(fb_blank);
756 }
757
758 static void n8x0_dss_setup(struct n800_s *s)
759 {
760 s->blizzard.opaque = s1d13745_init(NULL);
761 s->blizzard.block = s1d13745_write_block;
762 s->blizzard.write = s1d13745_write;
763 s->blizzard.read = s1d13745_read;
764
765 omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
766 }
767
768 static void n8x0_cbus_setup(struct n800_s *s)
769 {
770 qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
771 qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
772 qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
773
774 CBus *cbus = cbus_init(dat_out);
775
776 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
777 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
778 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
779
780 cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
781 cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
782 }
783
784 static void n8x0_uart_setup(struct n800_s *s)
785 {
786 CharDriverState *radio = uart_hci_init(
787 qdev_get_gpio_in(s->mpu->gpio, N8X0_BT_HOST_WKUP_GPIO));
788
789 qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_RESET_GPIO,
790 csrhci_pins_get(radio)[csrhci_pin_reset]);
791 qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_WKUP_GPIO,
792 csrhci_pins_get(radio)[csrhci_pin_wakeup]);
793
794 omap_uart_attach(s->mpu->uart[BT_UART], radio);
795 }
796
797 static void n8x0_usb_setup(struct n800_s *s)
798 {
799 SysBusDevice *dev;
800 s->usb = qdev_create(NULL, "tusb6010");
801 dev = SYS_BUS_DEVICE(s->usb);
802 qdev_init_nofail(s->usb);
803 sysbus_connect_irq(dev, 0,
804 qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
805 /* Using the NOR interface */
806 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
807 sysbus_mmio_get_region(dev, 0));
808 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
809 sysbus_mmio_get_region(dev, 1));
810 qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
811 qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
812 }
813
814 /* Setup done before the main bootloader starts by some early setup code
815 * - used when we want to run the main bootloader in emulation. This
816 * isn't documented. */
817 static uint32_t n800_pinout[104] = {
818 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
819 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
820 0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
821 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
822 0x01241800, 0x18181818, 0x000000f0, 0x01300000,
823 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
824 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
825 0x007c0000, 0x00000000, 0x00000088, 0x00840000,
826 0x00000000, 0x00000094, 0x00980300, 0x0f180003,
827 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
828 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
829 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
830 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
831 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
832 0x00000000, 0x00000038, 0x00340000, 0x00000000,
833 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
834 0x005c0808, 0x08080808, 0x08080058, 0x00540808,
835 0x08080808, 0x0808006c, 0x00680808, 0x08080808,
836 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
837 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
838 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
839 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
840 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
841 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
842 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
843 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
844 };
845
846 static void n800_setup_nolo_tags(void *sram_base)
847 {
848 int i;
849 uint32_t *p = sram_base + 0x8000;
850 uint32_t *v = sram_base + 0xa000;
851
852 memset(p, 0, 0x3000);
853
854 strcpy((void *) (p + 0), "QEMU N800");
855
856 strcpy((void *) (p + 8), "F5");
857
858 stl_p(p + 10, 0x04f70000);
859 strcpy((void *) (p + 9), "RX-34");
860
861 /* RAM size in MB? */
862 stl_p(p + 12, 0x80);
863
864 /* Pointer to the list of tags */
865 stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
866
867 /* The NOLO tags start here */
868 p = sram_base + 0x9000;
869 #define ADD_TAG(tag, len) \
870 stw_p((uint16_t *) p + 0, tag); \
871 stw_p((uint16_t *) p + 1, len); p++; \
872 stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
873
874 /* OMAP STI console? Pin out settings? */
875 ADD_TAG(0x6e01, 414);
876 for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
877 stl_p(v++, n800_pinout[i]);
878 }
879
880 /* Kernel memsize? */
881 ADD_TAG(0x6e05, 1);
882 stl_p(v++, 2);
883
884 /* NOLO serial console */
885 ADD_TAG(0x6e02, 4);
886 stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
887
888 #if 0
889 /* CBUS settings (Retu/AVilma) */
890 ADD_TAG(0x6e03, 6);
891 stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
892 stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
893 stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
894 v += 2;
895 #endif
896
897 /* Nokia ASIC BB5 (Retu/Tahvo) */
898 ADD_TAG(0x6e0a, 4);
899 stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
900 stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
901 v++;
902
903 /* LCD console? */
904 ADD_TAG(0x6e04, 4);
905 stw_p((uint16_t *) v + 0, 30); /* ??? */
906 stw_p((uint16_t *) v + 1, 24); /* ??? */
907 v++;
908
909 #if 0
910 /* LCD settings */
911 ADD_TAG(0x6e06, 2);
912 stw_p((uint16_t *) (v++), 15); /* ??? */
913 #endif
914
915 /* I^2C (Menelaus) */
916 ADD_TAG(0x6e07, 4);
917 stl_p(v++, 0x00720000); /* ??? */
918
919 /* Unknown */
920 ADD_TAG(0x6e0b, 6);
921 stw_p((uint16_t *) v + 0, 94); /* ??? */
922 stw_p((uint16_t *) v + 1, 23); /* ??? */
923 stw_p((uint16_t *) v + 2, 0); /* ??? */
924 v += 2;
925
926 /* OMAP gpio switch info */
927 ADD_TAG(0x6e0c, 80);
928 strcpy((void *) v, "bat_cover"); v += 3;
929 stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
930 stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
931 v += 2;
932 strcpy((void *) v, "cam_act"); v += 3;
933 stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
934 stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
935 v += 2;
936 strcpy((void *) v, "cam_turn"); v += 3;
937 stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
938 stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
939 v += 2;
940 strcpy((void *) v, "headphone"); v += 3;
941 stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
942 stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
943 v += 2;
944
945 /* Bluetooth */
946 ADD_TAG(0x6e0e, 12);
947 stl_p(v++, 0x5c623d01); /* ??? */
948 stl_p(v++, 0x00000201); /* ??? */
949 stl_p(v++, 0x00000000); /* ??? */
950
951 /* CX3110x WLAN settings */
952 ADD_TAG(0x6e0f, 8);
953 stl_p(v++, 0x00610025); /* ??? */
954 stl_p(v++, 0xffff0057); /* ??? */
955
956 /* MMC host settings */
957 ADD_TAG(0x6e10, 12);
958 stl_p(v++, 0xffff000f); /* ??? */
959 stl_p(v++, 0xffffffff); /* ??? */
960 stl_p(v++, 0x00000060); /* ??? */
961
962 /* OneNAND chip select */
963 ADD_TAG(0x6e11, 10);
964 stl_p(v++, 0x00000401); /* ??? */
965 stl_p(v++, 0x0002003a); /* ??? */
966 stl_p(v++, 0x00000002); /* ??? */
967
968 /* TEA5761 sensor settings */
969 ADD_TAG(0x6e12, 2);
970 stl_p(v++, 93); /* GPIO num ??? */
971
972 #if 0
973 /* Unknown tag */
974 ADD_TAG(6e09, 0);
975
976 /* Kernel UART / console */
977 ADD_TAG(6e12, 0);
978 #endif
979
980 /* End of the list */
981 stl_p(p++, 0x00000000);
982 stl_p(p++, 0x00000000);
983 }
984
985 /* This task is normally performed by the bootloader. If we're loading
986 * a kernel directly, we need to set up GPMC mappings ourselves. */
987 static void n800_gpmc_init(struct n800_s *s)
988 {
989 uint32_t config7 =
990 (0xf << 8) | /* MASKADDRESS */
991 (1 << 6) | /* CSVALID */
992 (4 << 0); /* BASEADDRESS */
993
994 cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */
995 &config7, sizeof(config7));
996 }
997
998 /* Setup sequence done by the bootloader */
999 static void n8x0_boot_init(void *opaque)
1000 {
1001 struct n800_s *s = (struct n800_s *) opaque;
1002 uint32_t buf;
1003
1004 /* PRCM setup */
1005 #define omap_writel(addr, val) \
1006 buf = (val); \
1007 cpu_physical_memory_write(addr, &buf, sizeof(buf))
1008
1009 omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */
1010 omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */
1011 omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */
1012 omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */
1013 omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */
1014 omap_writel(0x48008098, 0); /* PRCM_POLCTRL */
1015 omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */
1016 omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */
1017 omap_writel(0x48008158, 1); /* RM_RSTST_MPU */
1018 omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */
1019 omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */
1020 omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */
1021 omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */
1022 omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */
1023 omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */
1024 omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */
1025 omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */
1026 omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */
1027 omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */
1028 omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */
1029 omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */
1030 omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */
1031 omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */
1032 omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */
1033 omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */
1034 omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */
1035 omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */
1036 omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */
1037 omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */
1038 omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */
1039 omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */
1040 omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */
1041 omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */
1042 omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */
1043 omap_writel(0x48008540, /* CM_CLKSEL1_PLL */
1044 (0x78 << 12) | (6 << 8));
1045 omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */
1046
1047 /* GPMC setup */
1048 n800_gpmc_init(s);
1049
1050 /* Video setup */
1051 n800_dss_init(&s->blizzard);
1052
1053 /* CPU setup */
1054 s->mpu->cpu->env.GE = 0x5;
1055
1056 /* If the machine has a slided keyboard, open it */
1057 if (s->kbd) {
1058 qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
1059 }
1060 }
1061
1062 #define OMAP_TAG_NOKIA_BT 0x4e01
1063 #define OMAP_TAG_WLAN_CX3110X 0x4e02
1064 #define OMAP_TAG_CBUS 0x4e03
1065 #define OMAP_TAG_EM_ASIC_BB5 0x4e04
1066
1067 static struct omap_gpiosw_info_s {
1068 const char *name;
1069 int line;
1070 int type;
1071 } n800_gpiosw_info[] = {
1072 {
1073 "bat_cover", N800_BAT_COVER_GPIO,
1074 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1075 }, {
1076 "cam_act", N800_CAM_ACT_GPIO,
1077 OMAP_GPIOSW_TYPE_ACTIVITY,
1078 }, {
1079 "cam_turn", N800_CAM_TURN_GPIO,
1080 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
1081 }, {
1082 "headphone", N8X0_HEADPHONE_GPIO,
1083 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1084 },
1085 { NULL }
1086 }, n810_gpiosw_info[] = {
1087 {
1088 "gps_reset", N810_GPS_RESET_GPIO,
1089 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1090 }, {
1091 "gps_wakeup", N810_GPS_WAKEUP_GPIO,
1092 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1093 }, {
1094 "headphone", N8X0_HEADPHONE_GPIO,
1095 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1096 }, {
1097 "kb_lock", N810_KB_LOCK_GPIO,
1098 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1099 }, {
1100 "sleepx_led", N810_SLEEPX_LED_GPIO,
1101 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
1102 }, {
1103 "slide", N810_SLIDE_GPIO,
1104 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1105 },
1106 { NULL }
1107 };
1108
1109 static struct omap_partition_info_s {
1110 uint32_t offset;
1111 uint32_t size;
1112 int mask;
1113 const char *name;
1114 } n800_part_info[] = {
1115 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1116 { 0x00020000, 0x00060000, 0x0, "config" },
1117 { 0x00080000, 0x00200000, 0x0, "kernel" },
1118 { 0x00280000, 0x00200000, 0x3, "initfs" },
1119 { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
1120
1121 { 0, 0, 0, NULL }
1122 }, n810_part_info[] = {
1123 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1124 { 0x00020000, 0x00060000, 0x0, "config" },
1125 { 0x00080000, 0x00220000, 0x0, "kernel" },
1126 { 0x002a0000, 0x00400000, 0x0, "initfs" },
1127 { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
1128
1129 { 0, 0, 0, NULL }
1130 };
1131
1132 static bdaddr_t n8x0_bd_addr = {{ N8X0_BD_ADDR }};
1133
1134 static int n8x0_atag_setup(void *p, int model)
1135 {
1136 uint8_t *b;
1137 uint16_t *w;
1138 uint32_t *l;
1139 struct omap_gpiosw_info_s *gpiosw;
1140 struct omap_partition_info_s *partition;
1141 const char *tag;
1142
1143 w = p;
1144
1145 stw_p(w++, OMAP_TAG_UART); /* u16 tag */
1146 stw_p(w++, 4); /* u16 len */
1147 stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
1148 w++;
1149
1150 #if 0
1151 stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
1152 stw_p(w++, 4); /* u16 len */
1153 stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
1154 stw_p(w++, 115200); /* u32 console_speed */
1155 #endif
1156
1157 stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
1158 stw_p(w++, 36); /* u16 len */
1159 strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
1160 w += 8;
1161 strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
1162 w += 8;
1163 stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
1164 stw_p(w++, 24); /* u8 data_lines */
1165
1166 stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
1167 stw_p(w++, 8); /* u16 len */
1168 stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
1169 stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
1170 stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
1171 w++;
1172
1173 stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
1174 stw_p(w++, 4); /* u16 len */
1175 stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
1176 stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
1177
1178 gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
1179 for (; gpiosw->name; gpiosw++) {
1180 stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
1181 stw_p(w++, 20); /* u16 len */
1182 strcpy((void *) w, gpiosw->name); /* char name[12] */
1183 w += 6;
1184 stw_p(w++, gpiosw->line); /* u16 gpio */
1185 stw_p(w++, gpiosw->type);
1186 stw_p(w++, 0);
1187 stw_p(w++, 0);
1188 }
1189
1190 stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
1191 stw_p(w++, 12); /* u16 len */
1192 b = (void *) w;
1193 stb_p(b++, 0x01); /* u8 chip_type (CSR) */
1194 stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
1195 stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
1196 stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
1197 stb_p(b++, BT_UART + 1); /* u8 bt_uart */
1198 memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
1199 b += 6;
1200 stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
1201 w = (void *) b;
1202
1203 stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
1204 stw_p(w++, 8); /* u16 len */
1205 stw_p(w++, 0x25); /* u8 chip_type */
1206 stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
1207 stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
1208 stw_p(w++, -1); /* s16 spi_cs_gpio */
1209
1210 stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
1211 stw_p(w++, 16); /* u16 len */
1212 if (model == 810) {
1213 stw_p(w++, 0x23f); /* unsigned flags */
1214 stw_p(w++, -1); /* s16 power_pin */
1215 stw_p(w++, -1); /* s16 switch_pin */
1216 stw_p(w++, -1); /* s16 wp_pin */
1217 stw_p(w++, 0x240); /* unsigned flags */
1218 stw_p(w++, 0xc000); /* s16 power_pin */
1219 stw_p(w++, 0x0248); /* s16 switch_pin */
1220 stw_p(w++, 0xc000); /* s16 wp_pin */
1221 } else {
1222 stw_p(w++, 0xf); /* unsigned flags */
1223 stw_p(w++, -1); /* s16 power_pin */
1224 stw_p(w++, -1); /* s16 switch_pin */
1225 stw_p(w++, -1); /* s16 wp_pin */
1226 stw_p(w++, 0); /* unsigned flags */
1227 stw_p(w++, 0); /* s16 power_pin */
1228 stw_p(w++, 0); /* s16 switch_pin */
1229 stw_p(w++, 0); /* s16 wp_pin */
1230 }
1231
1232 stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
1233 stw_p(w++, 4); /* u16 len */
1234 stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
1235 w++;
1236
1237 partition = (model == 810) ? n810_part_info : n800_part_info;
1238 for (; partition->name; partition++) {
1239 stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
1240 stw_p(w++, 28); /* u16 len */
1241 strcpy((void *) w, partition->name); /* char name[16] */
1242 l = (void *) (w + 8);
1243 stl_p(l++, partition->size); /* unsigned int size */
1244 stl_p(l++, partition->offset); /* unsigned int offset */
1245 stl_p(l++, partition->mask); /* unsigned int mask_flags */
1246 w = (void *) l;
1247 }
1248
1249 stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
1250 stw_p(w++, 12); /* u16 len */
1251 #if 0
1252 strcpy((void *) w, "por"); /* char reason_str[12] */
1253 strcpy((void *) w, "charger"); /* char reason_str[12] */
1254 strcpy((void *) w, "32wd_to"); /* char reason_str[12] */
1255 strcpy((void *) w, "sw_rst"); /* char reason_str[12] */
1256 strcpy((void *) w, "mbus"); /* char reason_str[12] */
1257 strcpy((void *) w, "unknown"); /* char reason_str[12] */
1258 strcpy((void *) w, "swdg_to"); /* char reason_str[12] */
1259 strcpy((void *) w, "sec_vio"); /* char reason_str[12] */
1260 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1261 strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */
1262 #else
1263 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1264 #endif
1265 w += 6;
1266
1267 tag = (model == 810) ? "RX-44" : "RX-34";
1268 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1269 stw_p(w++, 24); /* u16 len */
1270 strcpy((void *) w, "product"); /* char component[12] */
1271 w += 6;
1272 strcpy((void *) w, tag); /* char version[12] */
1273 w += 6;
1274
1275 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1276 stw_p(w++, 24); /* u16 len */
1277 strcpy((void *) w, "hw-build"); /* char component[12] */
1278 w += 6;
1279 strcpy((void *) w, "QEMU ");
1280 pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
1281 w += 6;
1282
1283 tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
1284 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1285 stw_p(w++, 24); /* u16 len */
1286 strcpy((void *) w, "nolo"); /* char component[12] */
1287 w += 6;
1288 strcpy((void *) w, tag); /* char version[12] */
1289 w += 6;
1290
1291 return (void *) w - p;
1292 }
1293
1294 static int n800_atag_setup(const struct arm_boot_info *info, void *p)
1295 {
1296 return n8x0_atag_setup(p, 800);
1297 }
1298
1299 static int n810_atag_setup(const struct arm_boot_info *info, void *p)
1300 {
1301 return n8x0_atag_setup(p, 810);
1302 }
1303
1304 static void n8x0_init(MachineState *machine,
1305 struct arm_boot_info *binfo, int model)
1306 {
1307 MemoryRegion *sysmem = get_system_memory();
1308 struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s));
1309 int sdram_size = binfo->ram_size;
1310
1311 s->mpu = omap2420_mpu_init(sysmem, sdram_size, machine->cpu_model);
1312
1313 /* Setup peripherals
1314 *
1315 * Believed external peripherals layout in the N810:
1316 * (spi bus 1)
1317 * tsc2005
1318 * lcd_mipid
1319 * (spi bus 2)
1320 * Conexant cx3110x (WLAN)
1321 * optional: pc2400m (WiMAX)
1322 * (i2c bus 0)
1323 * TLV320AIC33 (audio codec)
1324 * TCM825x (camera by Toshiba)
1325 * lp5521 (clever LEDs)
1326 * tsl2563 (light sensor, hwmon, model 7, rev. 0)
1327 * lm8323 (keypad, manf 00, rev 04)
1328 * (i2c bus 1)
1329 * tmp105 (temperature sensor, hwmon)
1330 * menelaus (pm)
1331 * (somewhere on i2c - maybe N800-only)
1332 * tea5761 (FM tuner)
1333 * (serial 0)
1334 * GPS
1335 * (some serial port)
1336 * csr41814 (Bluetooth)
1337 */
1338 n8x0_gpio_setup(s);
1339 n8x0_nand_setup(s);
1340 n8x0_i2c_setup(s);
1341 if (model == 800) {
1342 n800_tsc_kbd_setup(s);
1343 } else if (model == 810) {
1344 n810_tsc_setup(s);
1345 n810_kbd_setup(s);
1346 }
1347 n8x0_spi_setup(s);
1348 n8x0_dss_setup(s);
1349 n8x0_cbus_setup(s);
1350 n8x0_uart_setup(s);
1351 if (usb_enabled()) {
1352 n8x0_usb_setup(s);
1353 }
1354
1355 if (machine->kernel_filename) {
1356 /* Or at the linux loader. */
1357 binfo->kernel_filename = machine->kernel_filename;
1358 binfo->kernel_cmdline = machine->kernel_cmdline;
1359 binfo->initrd_filename = machine->initrd_filename;
1360 arm_load_kernel(s->mpu->cpu, binfo);
1361
1362 qemu_register_reset(n8x0_boot_init, s);
1363 }
1364
1365 if (option_rom[0].name &&
1366 (machine->boot_order[0] == 'n' || !machine->kernel_filename)) {
1367 uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
1368 /* No, wait, better start at the ROM. */
1369 s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
1370
1371 /* This is intended for loading the `secondary.bin' program from
1372 * Nokia images (the NOLO bootloader). The entry point seems
1373 * to be at OMAP2_Q2_BASE + 0x400000.
1374 *
1375 * The `2nd.bin' files contain some kind of earlier boot code and
1376 * for them the entry point needs to be set to OMAP2_SRAM_BASE.
1377 *
1378 * The code above is for loading the `zImage' file from Nokia
1379 * images. */
1380 load_image_targphys(option_rom[0].name,
1381 OMAP2_Q2_BASE + 0x400000,
1382 sdram_size - 0x400000);
1383
1384 n800_setup_nolo_tags(nolo_tags);
1385 cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
1386 g_free(nolo_tags);
1387 }
1388 }
1389
1390 static struct arm_boot_info n800_binfo = {
1391 .loader_start = OMAP2_Q2_BASE,
1392 /* Actually two chips of 0x4000000 bytes each */
1393 .ram_size = 0x08000000,
1394 .board_id = 0x4f7,
1395 .atag_board = n800_atag_setup,
1396 };
1397
1398 static struct arm_boot_info n810_binfo = {
1399 .loader_start = OMAP2_Q2_BASE,
1400 /* Actually two chips of 0x4000000 bytes each */
1401 .ram_size = 0x08000000,
1402 /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
1403 * used by some older versions of the bootloader and 5555 is used
1404 * instead (including versions that shipped with many devices). */
1405 .board_id = 0x60c,
1406 .atag_board = n810_atag_setup,
1407 };
1408
1409 static void n800_init(MachineState *machine)
1410 {
1411 n8x0_init(machine, &n800_binfo, 800);
1412 }
1413
1414 static void n810_init(MachineState *machine)
1415 {
1416 n8x0_init(machine, &n810_binfo, 810);
1417 }
1418
1419 static void n800_class_init(ObjectClass *oc, void *data)
1420 {
1421 MachineClass *mc = MACHINE_CLASS(oc);
1422
1423 mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
1424 mc->init = n800_init;
1425 mc->default_boot_order = "";
1426 }
1427
1428 static const TypeInfo n800_type = {
1429 .name = MACHINE_TYPE_NAME("n800"),
1430 .parent = TYPE_MACHINE,
1431 .class_init = n800_class_init,
1432 };
1433
1434 static void n810_class_init(ObjectClass *oc, void *data)
1435 {
1436 MachineClass *mc = MACHINE_CLASS(oc);
1437
1438 mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
1439 mc->init = n810_init;
1440 mc->default_boot_order = "";
1441 }
1442
1443 static const TypeInfo n810_type = {
1444 .name = MACHINE_TYPE_NAME("n810"),
1445 .parent = TYPE_MACHINE,
1446 .class_init = n810_class_init,
1447 };
1448
1449 static void nseries_machine_init(void)
1450 {
1451 type_register_static(&n800_type);
1452 type_register_static(&n810_type);
1453 }
1454
1455 type_init(nseries_machine_init)
QEMU mirror