hw/block/onenand.c

   1 /*
   2  * OneNAND flash memories emulation.
   3  *
   4  * Copyright (C) 2008 Nokia Corporation
   5  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu/osdep.h"
  22 #include "qapi/error.h"
  23 #include "hw/hw.h"
  24 #include "hw/block/flash.h"
  25 #include "hw/irq.h"
  26 #include "hw/qdev-properties.h"
  27 #include "hw/qdev-properties-system.h"
  28 #include "sysemu/block-backend.h"
  29 #include "exec/memory.h"
  30 #include "hw/sysbus.h"
  31 #include "migration/vmstate.h"
  32 #include "qemu/error-report.h"
  33 #include "qemu/log.h"
  34 #include "qemu/module.h"
  35 #include "qom/object.h"
  36
  37 /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
  38 #define PAGE_SHIFT 11
  39
  40 /* Fixed */
  41 #define BLOCK_SHIFT (PAGE_SHIFT + 6)
  42
  43 #define TYPE_ONE_NAND "onenand"
  44 OBJECT_DECLARE_SIMPLE_TYPE(OneNANDState, ONE_NAND)
  45
  46 struct OneNANDState {
  47     SysBusDevice parent_obj;
  48
  49     struct {
  50         uint16_t man;
  51         uint16_t dev;
  52         uint16_t ver;
  53     } id;
  54     int shift;
  55     hwaddr base;
  56     qemu_irq intr;
  57     qemu_irq rdy;
  58     BlockBackend *blk;
  59     BlockBackend *blk_cur;
  60     uint8_t *image;
  61     uint8_t *otp;
  62     uint8_t *current;
  63     MemoryRegion ram;
  64     MemoryRegion mapped_ram;
  65     uint8_t current_direction;
  66     uint8_t *boot[2];
  67     uint8_t *data[2][2];
  68     MemoryRegion iomem;
  69     MemoryRegion container;
  70     int cycle;
  71     int otpmode;
  72
  73     uint16_t addr[8];
  74     uint16_t unladdr[8];
  75     int bufaddr;
  76     int count;
  77     uint16_t command;
  78     uint16_t config[2];
  79     uint16_t status;
  80     uint16_t intstatus;
  81     uint16_t wpstatus;
  82
  83     ECCState ecc;
  84
  85     int density_mask;
  86     int secs;
  87     int secs_cur;
  88     int blocks;
  89     uint8_t *blockwp;
  90 };
  91
  92 enum {
  93     ONEN_BUF_BLOCK = 0,
  94     ONEN_BUF_BLOCK2 = 1,
  95     ONEN_BUF_DEST_BLOCK = 2,
  96     ONEN_BUF_DEST_PAGE = 3,
  97     ONEN_BUF_PAGE = 7,
  98 };
  99
 100 enum {
 101     ONEN_ERR_CMD = 1 << 10,
 102     ONEN_ERR_ERASE = 1 << 11,
 103     ONEN_ERR_PROG = 1 << 12,
 104     ONEN_ERR_LOAD = 1 << 13,
 105 };
 106
 107 enum {
 108     ONEN_INT_RESET = 1 << 4,
 109     ONEN_INT_ERASE = 1 << 5,
 110     ONEN_INT_PROG = 1 << 6,
 111     ONEN_INT_LOAD = 1 << 7,
 112     ONEN_INT = 1 << 15,
 113 };
 114
 115 enum {
 116     ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
 117     ONEN_LOCK_LOCKED = 1 << 1,
 118     ONEN_LOCK_UNLOCKED = 1 << 2,
 119 };
 120
 121 static void onenand_mem_setup(OneNANDState *s)
 122 {
 123     /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
 124      * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
 125      * write boot commands.  Also take note of the BWPS bit.  */
 126     memory_region_init(&s->container, OBJECT(s), "onenand",
 127                        0x10000 << s->shift);
 128     memory_region_add_subregion(&s->container, 0, &s->iomem);
 129     memory_region_init_alias(&s->mapped_ram, OBJECT(s), "onenand-mapped-ram",
 130                              &s->ram, 0x0200 << s->shift,
 131                              0xbe00 << s->shift);
 132     memory_region_add_subregion_overlap(&s->container,
 133                                         0x0200 << s->shift,
 134                                         &s->mapped_ram,
 135                                         1);
 136 }
 137
 138 static void onenand_intr_update(OneNANDState *s)
 139 {
 140     qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
 141 }
 142
 143 static int onenand_pre_save(void *opaque)
 144 {
 145     OneNANDState *s = opaque;
 146     if (s->current == s->otp) {
 147         s->current_direction = 1;
 148     } else if (s->current == s->image) {
 149         s->current_direction = 2;
 150     } else {
 151         s->current_direction = 0;
 152     }
 153
 154     return 0;
 155 }
 156
 157 static int onenand_post_load(void *opaque, int version_id)
 158 {
 159     OneNANDState *s = opaque;
 160     switch (s->current_direction) {
 161     case 0:
 162         break;
 163     case 1:
 164         s->current = s->otp;
 165         break;
 166     case 2:
 167         s->current = s->image;
 168         break;
 169     default:
 170         return -1;
 171     }
 172     onenand_intr_update(s);
 173     return 0;
 174 }
 175
 176 static const VMStateDescription vmstate_onenand = {
 177     .name = "onenand",
 178     .version_id = 1,
 179     .minimum_version_id = 1,
 180     .pre_save = onenand_pre_save,
 181     .post_load = onenand_post_load,
 182     .fields = (const VMStateField[]) {
 183         VMSTATE_UINT8(current_direction, OneNANDState),
 184         VMSTATE_INT32(cycle, OneNANDState),
 185         VMSTATE_INT32(otpmode, OneNANDState),
 186         VMSTATE_UINT16_ARRAY(addr, OneNANDState, 8),
 187         VMSTATE_UINT16_ARRAY(unladdr, OneNANDState, 8),
 188         VMSTATE_INT32(bufaddr, OneNANDState),
 189         VMSTATE_INT32(count, OneNANDState),
 190         VMSTATE_UINT16(command, OneNANDState),
 191         VMSTATE_UINT16_ARRAY(config, OneNANDState, 2),
 192         VMSTATE_UINT16(status, OneNANDState),
 193         VMSTATE_UINT16(intstatus, OneNANDState),
 194         VMSTATE_UINT16(wpstatus, OneNANDState),
 195         VMSTATE_INT32(secs_cur, OneNANDState),
 196         VMSTATE_PARTIAL_VBUFFER(blockwp, OneNANDState, blocks),
 197         VMSTATE_UINT8(ecc.cp, OneNANDState),
 198         VMSTATE_UINT16_ARRAY(ecc.lp, OneNANDState, 2),
 199         VMSTATE_UINT16(ecc.count, OneNANDState),
 200         VMSTATE_BUFFER_POINTER_UNSAFE(otp, OneNANDState, 0,
 201             ((64 + 2) << PAGE_SHIFT)),
 202         VMSTATE_END_OF_LIST()
 203     }
 204 };
 205
 206 /* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
 207 static void onenand_reset(OneNANDState *s, int cold)
 208 {
 209     memset(&s->addr, 0, sizeof(s->addr));
 210     s->command = 0;
 211     s->count = 1;
 212     s->bufaddr = 0;
 213     s->config[0] = 0x40c0;
 214     s->config[1] = 0x0000;
 215     onenand_intr_update(s);
 216     qemu_irq_raise(s->rdy);
 217     s->status = 0x0000;
 218     s->intstatus = cold ? 0x8080 : 0x8010;
 219     s->unladdr[0] = 0;
 220     s->unladdr[1] = 0;
 221     s->wpstatus = 0x0002;
 222     s->cycle = 0;
 223     s->otpmode = 0;
 224     s->blk_cur = s->blk;
 225     s->current = s->image;
 226     s->secs_cur = s->secs;
 227
 228     if (cold) {
 229         /* Lock the whole flash */
 230         memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
 231
 232         if (s->blk_cur && blk_pread(s->blk_cur, 0, 8 << BDRV_SECTOR_BITS,
 233                                     s->boot[0], 0) < 0) {
 234             hw_error("%s: Loading the BootRAM failed.\n", __func__);
 235         }
 236     }
 237 }
 238
 239 static void onenand_system_reset(DeviceState *dev)
 240 {
 241     OneNANDState *s = ONE_NAND(dev);
 242
 243     onenand_reset(s, 1);
 244 }
 245
 246 static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
 247                 void *dest)
 248 {
 249     assert(UINT32_MAX >> BDRV_SECTOR_BITS > sec);
 250     assert(UINT32_MAX >> BDRV_SECTOR_BITS > secn);
 251     if (s->blk_cur) {
 252         return blk_pread(s->blk_cur, sec << BDRV_SECTOR_BITS,
 253                          secn << BDRV_SECTOR_BITS, dest, 0) < 0;
 254     } else if (sec + secn > s->secs_cur) {
 255         return 1;
 256     }
 257
 258     memcpy(dest, s->current + (sec << 9), secn << 9);
 259
 260     return 0;
 261 }
 262
 263 static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
 264                 void *src)
 265 {
 266     int result = 0;
 267
 268     if (secn > 0) {
 269         uint32_t size = secn << BDRV_SECTOR_BITS;
 270         uint32_t offset = sec << BDRV_SECTOR_BITS;
 271         assert(UINT32_MAX >> BDRV_SECTOR_BITS > sec);
 272         assert(UINT32_MAX >> BDRV_SECTOR_BITS > secn);
 273         const uint8_t *sp = (const uint8_t *)src;
 274         uint8_t *dp = 0;
 275         if (s->blk_cur) {
 276             dp = g_malloc(size);
 277             if (!dp || blk_pread(s->blk_cur, offset, size, dp, 0) < 0) {
 278                 result = 1;
 279             }
 280         } else {
 281             if (sec + secn > s->secs_cur) {
 282                 result = 1;
 283             } else {
 284                 dp = (uint8_t *)s->current + offset;
 285             }
 286         }
 287         if (!result) {
 288             uint32_t i;
 289             for (i = 0; i < size; i++) {
 290                 dp[i] &= sp[i];
 291             }
 292             if (s->blk_cur) {
 293                 result = blk_pwrite(s->blk_cur, offset, size, dp, 0) < 0;
 294             }
 295         }
 296         if (dp && s->blk_cur) {
 297             g_free(dp);
 298         }
 299     }
 300
 301     return result;
 302 }
 303
 304 static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
 305                 void *dest)
 306 {
 307     uint8_t buf[512];
 308
 309     if (s->blk_cur) {
 310         uint32_t offset = (s->secs_cur + (sec >> 5)) << BDRV_SECTOR_BITS;
 311         if (blk_pread(s->blk_cur, offset, BDRV_SECTOR_SIZE, buf, 0) < 0) {
 312             return 1;
 313         }
 314         memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
 315     } else if (sec + secn > s->secs_cur) {
 316         return 1;
 317     } else {
 318         memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
 319     }
 320
 321     return 0;
 322 }
 323
 324 static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
 325                 void *src)
 326 {
 327     int result = 0;
 328     if (secn > 0) {
 329         const uint8_t *sp = (const uint8_t *)src;
 330         uint8_t *dp = 0, *dpp = 0;
 331         uint32_t offset = (s->secs_cur + (sec >> 5)) << BDRV_SECTOR_BITS;
 332         assert(UINT32_MAX >> BDRV_SECTOR_BITS > s->secs_cur + (sec >> 5));
 333         if (s->blk_cur) {
 334             dp = g_malloc(512);
 335             if (!dp
 336                 || blk_pread(s->blk_cur, offset, BDRV_SECTOR_SIZE, dp, 0) < 0) {
 337                 result = 1;
 338             } else {
 339                 dpp = dp + ((sec & 31) << 4);
 340             }
 341         } else {
 342             if (sec + secn > s->secs_cur) {
 343                 result = 1;
 344             } else {
 345                 dpp = s->current + (s->secs_cur << 9) + (sec << 4);
 346             }
 347         }
 348         if (!result) {
 349             uint32_t i;
 350             for (i = 0; i < (secn << 4); i++) {
 351                 dpp[i] &= sp[i];
 352             }
 353             if (s->blk_cur) {
 354                 result = blk_pwrite(s->blk_cur, offset, BDRV_SECTOR_SIZE, dp,
 355                                     0) < 0;
 356             }
 357         }
 358         g_free(dp);
 359     }
 360     return result;
 361 }
 362
 363 static inline int onenand_erase(OneNANDState *s, int sec, int num)
 364 {
 365     uint8_t *blankbuf, *tmpbuf;
 366
 367     blankbuf = g_malloc(512);
 368     tmpbuf = g_malloc(512);
 369     memset(blankbuf, 0xff, 512);
 370     for (; num > 0; num--, sec++) {
 371         if (s->blk_cur) {
 372             int erasesec = s->secs_cur + (sec >> 5);
 373             if (blk_pwrite(s->blk_cur, sec << BDRV_SECTOR_BITS,
 374                            BDRV_SECTOR_SIZE, blankbuf, 0) < 0) {
 375                 goto fail;
 376             }
 377             if (blk_pread(s->blk_cur, erasesec << BDRV_SECTOR_BITS,
 378                           BDRV_SECTOR_SIZE, tmpbuf, 0) < 0) {
 379                 goto fail;
 380             }
 381             memcpy(tmpbuf + ((sec & 31) << 4), blankbuf, 1 << 4);
 382             if (blk_pwrite(s->blk_cur, erasesec << BDRV_SECTOR_BITS,
 383                            BDRV_SECTOR_SIZE, tmpbuf, 0) < 0) {
 384                 goto fail;
 385             }
 386         } else {
 387             if (sec + 1 > s->secs_cur) {
 388                 goto fail;
 389             }
 390             memcpy(s->current + (sec << 9), blankbuf, 512);
 391             memcpy(s->current + (s->secs_cur << 9) + (sec << 4),
 392                    blankbuf, 1 << 4);
 393         }
 394     }
 395
 396     g_free(tmpbuf);
 397     g_free(blankbuf);
 398     return 0;
 399
 400 fail:
 401     g_free(tmpbuf);
 402     g_free(blankbuf);
 403     return 1;
 404 }
 405
 406 static void onenand_command(OneNANDState *s)
 407 {
 408     int b;
 409     int sec;
 410     void *buf;
 411 #define SETADDR(block, page)                                \
 412     sec = (s->addr[page] & 3) +                             \
 413           ((((s->addr[page] >> 2) & 0x3f) +                 \
 414             (((s->addr[block] & 0xfff) |                    \
 415               (s->addr[block] >> 15 ? s->density_mask : 0)) \
 416              << 6))                                         \
 417            << (PAGE_SHIFT - 9));
 418 #define SETBUF_M()                                                           \
 419     buf = (s->bufaddr & 8) ? s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0]; \
 420     buf += (s->bufaddr & 3) << 9;
 421 #define SETBUF_S()                                          \
 422     buf = (s->bufaddr & 8) ?                                \
 423             s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1]; \
 424     buf += (s->bufaddr & 3) << 4;
 425
 426     switch (s->command) {
 427     case 0x00:  /* Load single/multiple sector data unit into buffer */
 428         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 429
 430         SETBUF_M()
 431         if (onenand_load_main(s, sec, s->count, buf))
 432             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 433
 434 #if 0
 435         SETBUF_S()
 436         if (onenand_load_spare(s, sec, s->count, buf))
 437             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 438 #endif
 439
 440         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 441          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 442          * then we need two split the read/write into two chunks.
 443          */
 444         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 445         break;
 446     case 0x13:  /* Load single/multiple spare sector into buffer */
 447         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 448
 449         SETBUF_S()
 450         if (onenand_load_spare(s, sec, s->count, buf))
 451             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 452
 453         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 454          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 455          * then we need two split the read/write into two chunks.
 456          */
 457         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 458         break;
 459     case 0x80:  /* Program single/multiple sector data unit from buffer */
 460         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 461
 462         SETBUF_M()
 463         if (onenand_prog_main(s, sec, s->count, buf))
 464             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 465
 466 #if 0
 467         SETBUF_S()
 468         if (onenand_prog_spare(s, sec, s->count, buf))
 469             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 470 #endif
 471
 472         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 473          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 474          * then we need two split the read/write into two chunks.
 475          */
 476         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 477         break;
 478     case 0x1a:  /* Program single/multiple spare area sector from buffer */
 479         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 480
 481         SETBUF_S()
 482         if (onenand_prog_spare(s, sec, s->count, buf))
 483             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 484
 485         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 486          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 487          * then we need two split the read/write into two chunks.
 488          */
 489         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 490         break;
 491     case 0x1b:  /* Copy-back program */
 492         SETBUF_S()
 493
 494         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 495         if (onenand_load_main(s, sec, s->count, buf))
 496             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 497
 498         SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
 499         if (onenand_prog_main(s, sec, s->count, buf))
 500             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 501
 502         /* TODO: spare areas */
 503
 504         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 505         break;
 506
 507     case 0x23:  /* Unlock NAND array block(s) */
 508         s->intstatus |= ONEN_INT;
 509
 510         /* XXX the previous (?) area should be locked automatically */
 511         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 512             if (b >= s->blocks) {
 513                 s->status |= ONEN_ERR_CMD;
 514                 break;
 515             }
 516             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 517                 break;
 518
 519             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 520         }
 521         break;
 522     case 0x27:  /* Unlock All NAND array blocks */
 523         s->intstatus |= ONEN_INT;
 524
 525         for (b = 0; b < s->blocks; b ++) {
 526             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 527                 break;
 528
 529             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 530         }
 531         break;
 532
 533     case 0x2a:  /* Lock NAND array block(s) */
 534         s->intstatus |= ONEN_INT;
 535
 536         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 537             if (b >= s->blocks) {
 538                 s->status |= ONEN_ERR_CMD;
 539                 break;
 540             }
 541             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 542                 break;
 543
 544             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
 545         }
 546         break;
 547     case 0x2c:  /* Lock-tight NAND array block(s) */
 548         s->intstatus |= ONEN_INT;
 549
 550         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 551             if (b >= s->blocks) {
 552                 s->status |= ONEN_ERR_CMD;
 553                 break;
 554             }
 555             if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
 556                 continue;
 557
 558             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
 559         }
 560         break;
 561
 562     case 0x71:  /* Erase-Verify-Read */
 563         s->intstatus |= ONEN_INT;
 564         break;
 565     case 0x95:  /* Multi-block erase */
 566         qemu_irq_pulse(s->intr);
 567         /* Fall through.  */
 568     case 0x94:  /* Block erase */
 569         sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
 570                         (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
 571                 << (BLOCK_SHIFT - 9);
 572         if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
 573             s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
 574
 575         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 576         break;
 577     case 0xb0:  /* Erase suspend */
 578         break;
 579     case 0x30:  /* Erase resume */
 580         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 581         break;
 582
 583     case 0xf0:  /* Reset NAND Flash core */
 584         onenand_reset(s, 0);
 585         break;
 586     case 0xf3:  /* Reset OneNAND */
 587         onenand_reset(s, 0);
 588         break;
 589
 590     case 0x65:  /* OTP Access */
 591         s->intstatus |= ONEN_INT;
 592         s->blk_cur = NULL;
 593         s->current = s->otp;
 594         s->secs_cur = 1 << (BLOCK_SHIFT - 9);
 595         s->addr[ONEN_BUF_BLOCK] = 0;
 596         s->otpmode = 1;
 597         break;
 598
 599     default:
 600         s->status |= ONEN_ERR_CMD;
 601         s->intstatus |= ONEN_INT;
 602         qemu_log_mask(LOG_GUEST_ERROR, "unknown OneNAND command %x\n",
 603                       s->command);
 604     }
 605
 606     onenand_intr_update(s);
 607 }
 608
 609 static uint64_t onenand_read(void *opaque, hwaddr addr,
 610                              unsigned size)
 611 {
 612     OneNANDState *s = (OneNANDState *) opaque;
 613     int offset = addr >> s->shift;
 614
 615     switch (offset) {
 616     case 0x0000 ... 0xbffe:
 617         return lduw_le_p(s->boot[0] + addr);
 618
 619     case 0xf000:  /* Manufacturer ID */
 620         return s->id.man;
 621     case 0xf001:  /* Device ID */
 622         return s->id.dev;
 623     case 0xf002:  /* Version ID */
 624         return s->id.ver;
 625     /* TODO: get the following values from a real chip!  */
 626     case 0xf003:  /* Data Buffer size */
 627         return 1 << PAGE_SHIFT;
 628     case 0xf004:  /* Boot Buffer size */
 629         return 0x200;
 630     case 0xf005:  /* Amount of buffers */
 631         return 1 | (2 << 8);
 632     case 0xf006:  /* Technology */
 633         return 0;
 634
 635     case 0xf100 ... 0xf107:  /* Start addresses */
 636         return s->addr[offset - 0xf100];
 637
 638     case 0xf200:  /* Start buffer */
 639         return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
 640
 641     case 0xf220:  /* Command */
 642         return s->command;
 643     case 0xf221:  /* System Configuration 1 */
 644         return s->config[0] & 0xffe0;
 645     case 0xf222:  /* System Configuration 2 */
 646         return s->config[1];
 647
 648     case 0xf240:  /* Controller Status */
 649         return s->status;
 650     case 0xf241:  /* Interrupt */
 651         return s->intstatus;
 652     case 0xf24c:  /* Unlock Start Block Address */
 653         return s->unladdr[0];
 654     case 0xf24d:  /* Unlock End Block Address */
 655         return s->unladdr[1];
 656     case 0xf24e:  /* Write Protection Status */
 657         return s->wpstatus;
 658
 659     case 0xff00:  /* ECC Status */
 660         return 0x00;
 661     case 0xff01:  /* ECC Result of main area data */
 662     case 0xff02:  /* ECC Result of spare area data */
 663     case 0xff03:  /* ECC Result of main area data */
 664     case 0xff04:  /* ECC Result of spare area data */
 665         qemu_log_mask(LOG_UNIMP,
 666                       "onenand: ECC result registers unimplemented\n");
 667         return 0x0000;
 668     }
 669
 670     qemu_log_mask(LOG_GUEST_ERROR, "read of unknown OneNAND register 0x%x\n",
 671                   offset);
 672     return 0;
 673 }
 674
 675 static void onenand_write(void *opaque, hwaddr addr,
 676                           uint64_t value, unsigned size)
 677 {
 678     OneNANDState *s = (OneNANDState *) opaque;
 679     int offset = addr >> s->shift;
 680     int sec;
 681
 682     switch (offset) {
 683     case 0x0000 ... 0x01ff:
 684     case 0x8000 ... 0x800f:
 685         if (s->cycle) {
 686             s->cycle = 0;
 687
 688             if (value == 0x0000) {
 689                 SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 690                 onenand_load_main(s, sec,
 691                                 1 << (PAGE_SHIFT - 9), s->data[0][0]);
 692                 s->addr[ONEN_BUF_PAGE] += 4;
 693                 s->addr[ONEN_BUF_PAGE] &= 0xff;
 694             }
 695             break;
 696         }
 697
 698         switch (value) {
 699         case 0x00f0:  /* Reset OneNAND */
 700             onenand_reset(s, 0);
 701             break;
 702
 703         case 0x00e0:  /* Load Data into Buffer */
 704             s->cycle = 1;
 705             break;
 706
 707         case 0x0090:  /* Read Identification Data */
 708             memset(s->boot[0], 0, 3 << s->shift);
 709             s->boot[0][0 << s->shift] = s->id.man & 0xff;
 710             s->boot[0][1 << s->shift] = s->id.dev & 0xff;
 711             s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
 712             break;
 713
 714         default:
 715             qemu_log_mask(LOG_GUEST_ERROR,
 716                           "unknown OneNAND boot command %" PRIx64 "\n",
 717                           value);
 718         }
 719         break;
 720
 721     case 0xf100 ... 0xf107:  /* Start addresses */
 722         s->addr[offset - 0xf100] = value;
 723         break;
 724
 725     case 0xf200:  /* Start buffer */
 726         s->bufaddr = (value >> 8) & 0xf;
 727         if (PAGE_SHIFT == 11)
 728             s->count = (value & 3) ?: 4;
 729         else if (PAGE_SHIFT == 10)
 730             s->count = (value & 1) ?: 2;
 731         break;
 732
 733     case 0xf220:  /* Command */
 734         if (s->intstatus & (1 << 15))
 735             break;
 736         s->command = value;
 737         onenand_command(s);
 738         break;
 739     case 0xf221:  /* System Configuration 1 */
 740         s->config[0] = value;
 741         onenand_intr_update(s);
 742         qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
 743         break;
 744     case 0xf222:  /* System Configuration 2 */
 745         s->config[1] = value;
 746         break;
 747
 748     case 0xf241:  /* Interrupt */
 749         s->intstatus &= value;
 750         if ((1 << 15) & ~s->intstatus)
 751             s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
 752                             ONEN_ERR_PROG | ONEN_ERR_LOAD);
 753         onenand_intr_update(s);
 754         break;
 755     case 0xf24c:  /* Unlock Start Block Address */
 756         s->unladdr[0] = value & (s->blocks - 1);
 757         /* For some reason we have to set the end address to by default
 758          * be same as start because the software forgets to write anything
 759          * in there.  */
 760         s->unladdr[1] = value & (s->blocks - 1);
 761         break;
 762     case 0xf24d:  /* Unlock End Block Address */
 763         s->unladdr[1] = value & (s->blocks - 1);
 764         break;
 765
 766     default:
 767         qemu_log_mask(LOG_GUEST_ERROR,
 768                       "write to unknown OneNAND register 0x%x\n",
 769                       offset);
 770     }
 771 }
 772
 773 static const MemoryRegionOps onenand_ops = {
 774     .read = onenand_read,
 775     .write = onenand_write,
 776     .endianness = DEVICE_NATIVE_ENDIAN,
 777 };
 778
 779 static void onenand_realize(DeviceState *dev, Error **errp)
 780 {
 781     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 782     OneNANDState *s = ONE_NAND(dev);
 783     uint32_t size = 1 << (24 + ((s->id.dev >> 4) & 7));
 784     void *ram;
 785     Error *local_err = NULL;
 786
 787     s->base = (hwaddr)-1;
 788     s->rdy = NULL;
 789     s->blocks = size >> BLOCK_SHIFT;
 790     s->secs = size >> 9;
 791     s->blockwp = g_malloc(s->blocks);
 792     s->density_mask = (s->id.dev & 0x08)
 793         ? (1 << (6 + ((s->id.dev >> 4) & 7))) : 0;
 794     memory_region_init_io(&s->iomem, OBJECT(s), &onenand_ops, s, "onenand",
 795                           0x10000 << s->shift);
 796     if (!s->blk) {
 797         s->image = memset(g_malloc(size + (size >> 5)),
 798                           0xff, size + (size >> 5));
 799     } else {
 800         if (!blk_supports_write_perm(s->blk)) {
 801             error_setg(errp, "Can't use a read-only drive");
 802             return;
 803         }
 804         blk_set_perm(s->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE,
 805                      BLK_PERM_ALL, &local_err);
 806         if (local_err) {
 807             error_propagate(errp, local_err);
 808             return;
 809         }
 810         s->blk_cur = s->blk;
 811     }
 812     s->otp = memset(g_malloc((64 + 2) << PAGE_SHIFT),
 813                     0xff, (64 + 2) << PAGE_SHIFT);
 814     memory_region_init_ram_nomigrate(&s->ram, OBJECT(s), "onenand.ram",
 815                            0xc000 << s->shift, &error_fatal);
 816     vmstate_register_ram_global(&s->ram);
 817     ram = memory_region_get_ram_ptr(&s->ram);
 818     s->boot[0] = ram + (0x0000 << s->shift);
 819     s->boot[1] = ram + (0x8000 << s->shift);
 820     s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
 821     s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
 822     s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
 823     s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
 824     onenand_mem_setup(s);
 825     sysbus_init_irq(sbd, &s->intr);
 826     sysbus_init_mmio(sbd, &s->container);
 827     vmstate_register(VMSTATE_IF(dev),
 828                      ((s->shift & 0x7f) << 24)
 829                      | ((s->id.man & 0xff) << 16)
 830                      | ((s->id.dev & 0xff) << 8)
 831                      | (s->id.ver & 0xff),
 832                      &vmstate_onenand, s);
 833 }
 834
 835 static Property onenand_properties[] = {
 836     DEFINE_PROP_UINT16("manufacturer_id", OneNANDState, id.man, 0),
 837     DEFINE_PROP_UINT16("device_id", OneNANDState, id.dev, 0),
 838     DEFINE_PROP_UINT16("version_id", OneNANDState, id.ver, 0),
 839     DEFINE_PROP_INT32("shift", OneNANDState, shift, 0),
 840     DEFINE_PROP_DRIVE("drive", OneNANDState, blk),
 841     DEFINE_PROP_END_OF_LIST(),
 842 };
 843
 844 static void onenand_class_init(ObjectClass *klass, void *data)
 845 {
 846     DeviceClass *dc = DEVICE_CLASS(klass);
 847
 848     dc->realize = onenand_realize;
 849     dc->reset = onenand_system_reset;
 850     device_class_set_props(dc, onenand_properties);
 851 }
 852
 853 static const TypeInfo onenand_info = {
 854     .name          = TYPE_ONE_NAND,
 855     .parent        = TYPE_SYS_BUS_DEVICE,
 856     .instance_size = sizeof(OneNANDState),
 857     .class_init    = onenand_class_init,
 858 };
 859
 860 static void onenand_register_types(void)
 861 {
 862     type_register_static(&onenand_info);
 863 }
 864
 865 void *onenand_raw_otp(DeviceState *onenand_device)
 866 {
 867     OneNANDState *s = ONE_NAND(onenand_device);
 868
 869     return s->otp;
 870 }
 871
 872 type_init(onenand_register_types)