hw/char/sh_serial.c

   1 /*
   2  * QEMU SCI/SCIF serial port emulation
   3  *
   4  * Copyright (c) 2007 Magnus Damm
   5  *
   6  * Based on serial.c - QEMU 16450 UART emulation
   7  * Copyright (c) 2003-2004 Fabrice Bellard
   8  *
   9  * Permission is hereby granted, free of charge, to any person obtaining a copy
  10  * of this software and associated documentation files (the "Software"), to deal
  11  * in the Software without restriction, including without limitation the rights
  12  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  13  * copies of the Software, and to permit persons to whom the Software is
  14  * furnished to do so, subject to the following conditions:
  15  *
  16  * The above copyright notice and this permission notice shall be included in
  17  * all copies or substantial portions of the Software.
  18  *
  19  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  20  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  21  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  22  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  23  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  24  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  25  * THE SOFTWARE.
  26  */
  27 #include "qemu/osdep.h"
  28 #include "hw/hw.h"
  29 #include "hw/sh4/sh.h"
  30 #include "sysemu/char.h"
  31 #include "exec/address-spaces.h"
  32 #include "qapi/error.h"
  33
  34 //#define DEBUG_SERIAL
  35
  36 #define SH_SERIAL_FLAG_TEND (1 << 0)
  37 #define SH_SERIAL_FLAG_TDE  (1 << 1)
  38 #define SH_SERIAL_FLAG_RDF  (1 << 2)
  39 #define SH_SERIAL_FLAG_BRK  (1 << 3)
  40 #define SH_SERIAL_FLAG_DR   (1 << 4)
  41
  42 #define SH_RX_FIFO_LENGTH (16)
  43
  44 typedef struct {
  45     MemoryRegion iomem;
  46     MemoryRegion iomem_p4;
  47     MemoryRegion iomem_a7;
  48     uint8_t smr;
  49     uint8_t brr;
  50     uint8_t scr;
  51     uint8_t dr; /* ftdr / tdr */
  52     uint8_t sr; /* fsr / ssr */
  53     uint16_t fcr;
  54     uint8_t sptr;
  55
  56     uint8_t rx_fifo[SH_RX_FIFO_LENGTH]; /* frdr / rdr */
  57     uint8_t rx_cnt;
  58     uint8_t rx_tail;
  59     uint8_t rx_head;
  60
  61     int freq;
  62     int feat;
  63     int flags;
  64     int rtrg;
  65
  66     CharBackend chr;
  67
  68     qemu_irq eri;
  69     qemu_irq rxi;
  70     qemu_irq txi;
  71     qemu_irq tei;
  72     qemu_irq bri;
  73 } sh_serial_state;
  74
  75 static void sh_serial_clear_fifo(sh_serial_state * s)
  76 {
  77     memset(s->rx_fifo, 0, SH_RX_FIFO_LENGTH);
  78     s->rx_cnt = 0;
  79     s->rx_head = 0;
  80     s->rx_tail = 0;
  81 }
  82
  83 static void sh_serial_write(void *opaque, hwaddr offs,
  84                             uint64_t val, unsigned size)
  85 {
  86     sh_serial_state *s = opaque;
  87     unsigned char ch;
  88
  89 #ifdef DEBUG_SERIAL
  90     printf("sh_serial: write offs=0x%02x val=0x%02x\n",
  91            offs, val);
  92 #endif
  93     switch(offs) {
  94     case 0x00: /* SMR */
  95         s->smr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0x7b : 0xff);
  96         return;
  97     case 0x04: /* BRR */
  98         s->brr = val;
  99         return;
 100     case 0x08: /* SCR */
 101         /* TODO : For SH7751, SCIF mask should be 0xfb. */
 102         s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff);
 103         if (!(val & (1 << 5)))
 104             s->flags |= SH_SERIAL_FLAG_TEND;
 105         if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) {
 106             qemu_set_irq(s->txi, val & (1 << 7));
 107         }
 108         if (!(val & (1 << 6))) {
 109             qemu_set_irq(s->rxi, 0);
 110         }
 111         return;
 112     case 0x0c: /* FTDR / TDR */
 113         if (qemu_chr_fe_get_driver(&s->chr)) {
 114             ch = val;
 115             /* XXX this blocks entire thread. Rewrite to use
 116              * qemu_chr_fe_write and background I/O callbacks */
 117             qemu_chr_fe_write_all(&s->chr, &ch, 1);
 118         }
 119         s->dr = val;
 120         s->flags &= ~SH_SERIAL_FLAG_TDE;
 121         return;
 122 #if 0
 123     case 0x14: /* FRDR / RDR */
 124         ret = 0;
 125         break;
 126 #endif
 127     }
 128     if (s->feat & SH_SERIAL_FEAT_SCIF) {
 129         switch(offs) {
 130         case 0x10: /* FSR */
 131             if (!(val & (1 << 6)))
 132                 s->flags &= ~SH_SERIAL_FLAG_TEND;
 133             if (!(val & (1 << 5)))
 134                 s->flags &= ~SH_SERIAL_FLAG_TDE;
 135             if (!(val & (1 << 4)))
 136                 s->flags &= ~SH_SERIAL_FLAG_BRK;
 137             if (!(val & (1 << 1)))
 138                 s->flags &= ~SH_SERIAL_FLAG_RDF;
 139             if (!(val & (1 << 0)))
 140                 s->flags &= ~SH_SERIAL_FLAG_DR;
 141
 142             if (!(val & (1 << 1)) || !(val & (1 << 0))) {
 143                 if (s->rxi) {
 144                     qemu_set_irq(s->rxi, 0);
 145                 }
 146             }
 147             return;
 148         case 0x18: /* FCR */
 149             s->fcr = val;
 150             switch ((val >> 6) & 3) {
 151             case 0:
 152                 s->rtrg = 1;
 153                 break;
 154             case 1:
 155                 s->rtrg = 4;
 156                 break;
 157             case 2:
 158                 s->rtrg = 8;
 159                 break;
 160             case 3:
 161                 s->rtrg = 14;
 162                 break;
 163             }
 164             if (val & (1 << 1)) {
 165                 sh_serial_clear_fifo(s);
 166                 s->sr &= ~(1 << 1);
 167             }
 168
 169             return;
 170         case 0x20: /* SPTR */
 171             s->sptr = val & 0xf3;
 172             return;
 173         case 0x24: /* LSR */
 174             return;
 175         }
 176     }
 177     else {
 178         switch(offs) {
 179 #if 0
 180         case 0x0c:
 181             ret = s->dr;
 182             break;
 183         case 0x10:
 184             ret = 0;
 185             break;
 186 #endif
 187         case 0x1c:
 188             s->sptr = val & 0x8f;
 189             return;
 190         }
 191     }
 192
 193     fprintf(stderr, "sh_serial: unsupported write to 0x%02"
 194             HWADDR_PRIx "\n", offs);
 195     abort();
 196 }
 197
 198 static uint64_t sh_serial_read(void *opaque, hwaddr offs,
 199                                unsigned size)
 200 {
 201     sh_serial_state *s = opaque;
 202     uint32_t ret = ~0;
 203
 204 #if 0
 205     switch(offs) {
 206     case 0x00:
 207         ret = s->smr;
 208         break;
 209     case 0x04:
 210         ret = s->brr;
 211         break;
 212     case 0x08:
 213         ret = s->scr;
 214         break;
 215     case 0x14:
 216         ret = 0;
 217         break;
 218     }
 219 #endif
 220     if (s->feat & SH_SERIAL_FEAT_SCIF) {
 221         switch(offs) {
 222         case 0x00: /* SMR */
 223             ret = s->smr;
 224             break;
 225         case 0x08: /* SCR */
 226             ret = s->scr;
 227             break;
 228         case 0x10: /* FSR */
 229             ret = 0;
 230             if (s->flags & SH_SERIAL_FLAG_TEND)
 231                 ret |= (1 << 6);
 232             if (s->flags & SH_SERIAL_FLAG_TDE)
 233                 ret |= (1 << 5);
 234             if (s->flags & SH_SERIAL_FLAG_BRK)
 235                 ret |= (1 << 4);
 236             if (s->flags & SH_SERIAL_FLAG_RDF)
 237                 ret |= (1 << 1);
 238             if (s->flags & SH_SERIAL_FLAG_DR)
 239                 ret |= (1 << 0);
 240
 241             if (s->scr & (1 << 5))
 242                 s->flags |= SH_SERIAL_FLAG_TDE | SH_SERIAL_FLAG_TEND;
 243
 244             break;
 245         case 0x14:
 246             if (s->rx_cnt > 0) {
 247                 ret = s->rx_fifo[s->rx_tail++];
 248                 s->rx_cnt--;
 249                 if (s->rx_tail == SH_RX_FIFO_LENGTH)
 250                     s->rx_tail = 0;
 251                 if (s->rx_cnt < s->rtrg)
 252                     s->flags &= ~SH_SERIAL_FLAG_RDF;
 253             }
 254             break;
 255         case 0x18:
 256             ret = s->fcr;
 257             break;
 258         case 0x1c:
 259             ret = s->rx_cnt;
 260             break;
 261         case 0x20:
 262             ret = s->sptr;
 263             break;
 264         case 0x24:
 265             ret = 0;
 266             break;
 267         }
 268     }
 269     else {
 270         switch(offs) {
 271 #if 0
 272         case 0x0c:
 273             ret = s->dr;
 274             break;
 275         case 0x10:
 276             ret = 0;
 277             break;
 278         case 0x14:
 279             ret = s->rx_fifo[0];
 280             break;
 281 #endif
 282         case 0x1c:
 283             ret = s->sptr;
 284             break;
 285         }
 286     }
 287 #ifdef DEBUG_SERIAL
 288     printf("sh_serial: read offs=0x%02x val=0x%x\n",
 289            offs, ret);
 290 #endif
 291
 292     if (ret & ~((1 << 16) - 1)) {
 293         fprintf(stderr, "sh_serial: unsupported read from 0x%02"
 294                 HWADDR_PRIx "\n", offs);
 295         abort();
 296     }
 297
 298     return ret;
 299 }
 300
 301 static int sh_serial_can_receive(sh_serial_state *s)
 302 {
 303     return s->scr & (1 << 4);
 304 }
 305
 306 static void sh_serial_receive_break(sh_serial_state *s)
 307 {
 308     if (s->feat & SH_SERIAL_FEAT_SCIF)
 309         s->sr |= (1 << 4);
 310 }
 311
 312 static int sh_serial_can_receive1(void *opaque)
 313 {
 314     sh_serial_state *s = opaque;
 315     return sh_serial_can_receive(s);
 316 }
 317
 318 static void sh_serial_receive1(void *opaque, const uint8_t *buf, int size)
 319 {
 320     sh_serial_state *s = opaque;
 321
 322     if (s->feat & SH_SERIAL_FEAT_SCIF) {
 323         int i;
 324         for (i = 0; i < size; i++) {
 325             if (s->rx_cnt < SH_RX_FIFO_LENGTH) {
 326                 s->rx_fifo[s->rx_head++] = buf[i];
 327                 if (s->rx_head == SH_RX_FIFO_LENGTH) {
 328                     s->rx_head = 0;
 329                 }
 330                 s->rx_cnt++;
 331                 if (s->rx_cnt >= s->rtrg) {
 332                     s->flags |= SH_SERIAL_FLAG_RDF;
 333                     if (s->scr & (1 << 6) && s->rxi) {
 334                         qemu_set_irq(s->rxi, 1);
 335                     }
 336                 }
 337             }
 338         }
 339     } else {
 340         s->rx_fifo[0] = buf[0];
 341     }
 342 }
 343
 344 static void sh_serial_event(void *opaque, int event)
 345 {
 346     sh_serial_state *s = opaque;
 347     if (event == CHR_EVENT_BREAK)
 348         sh_serial_receive_break(s);
 349 }
 350
 351 static const MemoryRegionOps sh_serial_ops = {
 352     .read = sh_serial_read,
 353     .write = sh_serial_write,
 354     .endianness = DEVICE_NATIVE_ENDIAN,
 355 };
 356
 357 void sh_serial_init(MemoryRegion *sysmem,
 358                     hwaddr base, int feat,
 359                     uint32_t freq, Chardev *chr,
 360                     qemu_irq eri_source,
 361                     qemu_irq rxi_source,
 362                     qemu_irq txi_source,
 363                     qemu_irq tei_source,
 364                     qemu_irq bri_source)
 365 {
 366     sh_serial_state *s;
 367
 368     s = g_malloc0(sizeof(sh_serial_state));
 369
 370     s->feat = feat;
 371     s->flags = SH_SERIAL_FLAG_TEND | SH_SERIAL_FLAG_TDE;
 372     s->rtrg = 1;
 373
 374     s->smr = 0;
 375     s->brr = 0xff;
 376     s->scr = 1 << 5; /* pretend that TX is enabled so early printk works */
 377     s->sptr = 0;
 378
 379     if (feat & SH_SERIAL_FEAT_SCIF) {
 380         s->fcr = 0;
 381     }
 382     else {
 383         s->dr = 0xff;
 384     }
 385
 386     sh_serial_clear_fifo(s);
 387
 388     memory_region_init_io(&s->iomem, NULL, &sh_serial_ops, s,
 389                           "serial", 0x100000000ULL);
 390
 391     memory_region_init_alias(&s->iomem_p4, NULL, "serial-p4", &s->iomem,
 392                              0, 0x28);
 393     memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4);
 394
 395     memory_region_init_alias(&s->iomem_a7, NULL, "serial-a7", &s->iomem,
 396                              0, 0x28);
 397     memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7);
 398
 399     if (chr) {
 400         qemu_chr_fe_init(&s->chr, chr, &error_abort);
 401         qemu_chr_fe_set_handlers(&s->chr, sh_serial_can_receive1,
 402                                  sh_serial_receive1,
 403                                  sh_serial_event, s, NULL, true);
 404     }
 405
 406     s->eri = eri_source;
 407     s->rxi = rxi_source;
 408     s->txi = txi_source;
 409     s->tei = tei_source;
 410     s->bri = bri_source;
 411 }