]> git.proxmox.com Git - mirror_qemu.git/blob - hw/cpu/arm11mpcore.c
Include qemu/module.h where needed, drop it from qemu-common.h
[mirror_qemu.git] / hw / cpu / arm11mpcore.c
1 /*
2 * ARM11MPCore internal peripheral emulation.
3 *
4 * Copyright (c) 2006-2007 CodeSourcery.
5 * Written by Paul Brook
6 *
7 * This code is licensed under the GPL.
8 */
9
10 #include "qemu/osdep.h"
11 #include "qapi/error.h"
12 #include "qemu/module.h"
13 #include "hw/cpu/arm11mpcore.h"
14 #include "hw/intc/realview_gic.h"
15
16
17 static void mpcore_priv_set_irq(void *opaque, int irq, int level)
18 {
19 ARM11MPCorePriveState *s = (ARM11MPCorePriveState *)opaque;
20
21 qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
22 }
23
24 static void mpcore_priv_map_setup(ARM11MPCorePriveState *s)
25 {
26 int i;
27 SysBusDevice *scubusdev = SYS_BUS_DEVICE(&s->scu);
28 DeviceState *gicdev = DEVICE(&s->gic);
29 SysBusDevice *gicbusdev = SYS_BUS_DEVICE(&s->gic);
30 SysBusDevice *timerbusdev = SYS_BUS_DEVICE(&s->mptimer);
31 SysBusDevice *wdtbusdev = SYS_BUS_DEVICE(&s->wdtimer);
32
33 memory_region_add_subregion(&s->container, 0,
34 sysbus_mmio_get_region(scubusdev, 0));
35 /* GIC CPU interfaces: "current CPU" at 0x100, then specific CPUs
36 * at 0x200, 0x300...
37 */
38 for (i = 0; i < (s->num_cpu + 1); i++) {
39 hwaddr offset = 0x100 + (i * 0x100);
40 memory_region_add_subregion(&s->container, offset,
41 sysbus_mmio_get_region(gicbusdev, i + 1));
42 }
43 /* Add the regions for timer and watchdog for "current CPU" and
44 * for each specific CPU.
45 */
46 for (i = 0; i < (s->num_cpu + 1); i++) {
47 /* Timers at 0x600, 0x700, ...; watchdogs at 0x620, 0x720, ... */
48 hwaddr offset = 0x600 + i * 0x100;
49 memory_region_add_subregion(&s->container, offset,
50 sysbus_mmio_get_region(timerbusdev, i));
51 memory_region_add_subregion(&s->container, offset + 0x20,
52 sysbus_mmio_get_region(wdtbusdev, i));
53 }
54 memory_region_add_subregion(&s->container, 0x1000,
55 sysbus_mmio_get_region(gicbusdev, 0));
56 /* Wire up the interrupt from each watchdog and timer.
57 * For each core the timer is PPI 29 and the watchdog PPI 30.
58 */
59 for (i = 0; i < s->num_cpu; i++) {
60 int ppibase = (s->num_irq - 32) + i * 32;
61 sysbus_connect_irq(timerbusdev, i,
62 qdev_get_gpio_in(gicdev, ppibase + 29));
63 sysbus_connect_irq(wdtbusdev, i,
64 qdev_get_gpio_in(gicdev, ppibase + 30));
65 }
66 }
67
68 static void mpcore_priv_realize(DeviceState *dev, Error **errp)
69 {
70 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
71 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(dev);
72 DeviceState *scudev = DEVICE(&s->scu);
73 DeviceState *gicdev = DEVICE(&s->gic);
74 DeviceState *mptimerdev = DEVICE(&s->mptimer);
75 DeviceState *wdtimerdev = DEVICE(&s->wdtimer);
76 Error *err = NULL;
77
78 qdev_prop_set_uint32(scudev, "num-cpu", s->num_cpu);
79 object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
80 if (err != NULL) {
81 error_propagate(errp, err);
82 return;
83 }
84
85 qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu);
86 qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq);
87 object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
88 if (err != NULL) {
89 error_propagate(errp, err);
90 return;
91 }
92
93 /* Pass through outbound IRQ lines from the GIC */
94 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->gic));
95
96 /* Pass through inbound GPIO lines to the GIC */
97 qdev_init_gpio_in(dev, mpcore_priv_set_irq, s->num_irq - 32);
98
99 qdev_prop_set_uint32(mptimerdev, "num-cpu", s->num_cpu);
100 object_property_set_bool(OBJECT(&s->mptimer), true, "realized", &err);
101 if (err != NULL) {
102 error_propagate(errp, err);
103 return;
104 }
105
106 qdev_prop_set_uint32(wdtimerdev, "num-cpu", s->num_cpu);
107 object_property_set_bool(OBJECT(&s->wdtimer), true, "realized", &err);
108 if (err != NULL) {
109 error_propagate(errp, err);
110 return;
111 }
112
113 mpcore_priv_map_setup(s);
114 }
115
116 static void mpcore_priv_initfn(Object *obj)
117 {
118 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
119 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(obj);
120
121 memory_region_init(&s->container, OBJECT(s),
122 "mpcore-priv-container", 0x2000);
123 sysbus_init_mmio(sbd, &s->container);
124
125 sysbus_init_child_obj(obj, "scu", &s->scu, sizeof(s->scu), TYPE_ARM11_SCU);
126
127 sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic), TYPE_ARM_GIC);
128 /* Request the legacy 11MPCore GIC behaviour: */
129 qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 0);
130
131 sysbus_init_child_obj(obj, "mptimer", &s->mptimer, sizeof(s->mptimer),
132 TYPE_ARM_MPTIMER);
133
134 sysbus_init_child_obj(obj, "wdtimer", &s->wdtimer, sizeof(s->wdtimer),
135 TYPE_ARM_MPTIMER);
136 }
137
138 static Property mpcore_priv_properties[] = {
139 DEFINE_PROP_UINT32("num-cpu", ARM11MPCorePriveState, num_cpu, 1),
140 /* The ARM11 MPCORE TRM says the on-chip controller may have
141 * anything from 0 to 224 external interrupt IRQ lines (with another
142 * 32 internal). We default to 32+32, which is the number provided by
143 * the ARM11 MPCore test chip in the Realview Versatile Express
144 * coretile. Other boards may differ and should set this property
145 * appropriately. Some Linux kernels may not boot if the hardware
146 * has more IRQ lines than the kernel expects.
147 */
148 DEFINE_PROP_UINT32("num-irq", ARM11MPCorePriveState, num_irq, 64),
149 DEFINE_PROP_END_OF_LIST(),
150 };
151
152 static void mpcore_priv_class_init(ObjectClass *klass, void *data)
153 {
154 DeviceClass *dc = DEVICE_CLASS(klass);
155
156 dc->realize = mpcore_priv_realize;
157 dc->props = mpcore_priv_properties;
158 }
159
160 static const TypeInfo mpcore_priv_info = {
161 .name = TYPE_ARM11MPCORE_PRIV,
162 .parent = TYPE_SYS_BUS_DEVICE,
163 .instance_size = sizeof(ARM11MPCorePriveState),
164 .instance_init = mpcore_priv_initfn,
165 .class_init = mpcore_priv_class_init,
166 };
167
168 static void arm11mpcore_register_types(void)
169 {
170 type_register_static(&mpcore_priv_info);
171 }
172
173 type_init(arm11mpcore_register_types)