hw/dma/rc4030.c

   1 /*
   2  * QEMU JAZZ RC4030 chipset
   3  *
   4  * Copyright (c) 2007-2013 Hervé Poussineau
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "qemu/osdep.h"
  26 #include "qemu/units.h"
  27 #include "hw/hw.h"
  28 #include "hw/irq.h"
  29 #include "hw/mips/mips.h"
  30 #include "hw/sysbus.h"
  31 #include "migration/vmstate.h"
  32 #include "qemu/timer.h"
  33 #include "qemu/log.h"
  34 #include "qemu/module.h"
  35 #include "exec/address-spaces.h"
  36 #include "trace.h"
  37
  38 /********************************************************/
  39 /* rc4030 emulation                                     */
  40
  41 typedef struct dma_pagetable_entry {
  42     int32_t frame;
  43     int32_t owner;
  44 } QEMU_PACKED dma_pagetable_entry;
  45
  46 #define DMA_PAGESIZE    4096
  47 #define DMA_REG_ENABLE  1
  48 #define DMA_REG_COUNT   2
  49 #define DMA_REG_ADDRESS 3
  50
  51 #define DMA_FLAG_ENABLE     0x0001
  52 #define DMA_FLAG_MEM_TO_DEV 0x0002
  53 #define DMA_FLAG_TC_INTR    0x0100
  54 #define DMA_FLAG_MEM_INTR   0x0200
  55 #define DMA_FLAG_ADDR_INTR  0x0400
  56
  57 #define TYPE_RC4030 "rc4030"
  58 #define RC4030(obj) \
  59     OBJECT_CHECK(rc4030State, (obj), TYPE_RC4030)
  60
  61 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
  62
  63 typedef struct rc4030State {
  64
  65     SysBusDevice parent;
  66
  67     uint32_t config; /* 0x0000: RC4030 config register */
  68     uint32_t revision; /* 0x0008: RC4030 Revision register */
  69     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
  70
  71     /* DMA */
  72     uint32_t dma_regs[8][4];
  73     uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
  74     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
  75
  76     /* cache */
  77     uint32_t cache_maint; /* 0x0030: Cache Maintenance */
  78     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
  79     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
  80     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
  81     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
  82     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
  83
  84     uint32_t nmi_interrupt; /* 0x0200: interrupt source */
  85     uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
  86     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
  87     uint32_t rem_speed[16];
  88     uint32_t imr_jazz; /* Local bus int enable mask */
  89     uint32_t isr_jazz; /* Local bus int source */
  90
  91     /* timer */
  92     QEMUTimer *periodic_timer;
  93     uint32_t itr; /* Interval timer reload */
  94
  95     qemu_irq timer_irq;
  96     qemu_irq jazz_bus_irq;
  97
  98     /* whole DMA memory region, root of DMA address space */
  99     IOMMUMemoryRegion dma_mr;
 100     AddressSpace dma_as;
 101
 102     MemoryRegion iomem_chipset;
 103     MemoryRegion iomem_jazzio;
 104 } rc4030State;
 105
 106 static void set_next_tick(rc4030State *s)
 107 {
 108     uint32_t tm_hz;
 109     qemu_irq_lower(s->timer_irq);
 110
 111     tm_hz = 1000 / (s->itr + 1);
 112
 113     timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
 114                    NANOSECONDS_PER_SECOND / tm_hz);
 115 }
 116
 117 /* called for accesses to rc4030 */
 118 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
 119 {
 120     rc4030State *s = opaque;
 121     uint32_t val;
 122
 123     addr &= 0x3fff;
 124     switch (addr & ~0x3) {
 125     /* Global config register */
 126     case 0x0000:
 127         val = s->config;
 128         break;
 129     /* Revision register */
 130     case 0x0008:
 131         val = s->revision;
 132         break;
 133     /* Invalid Address register */
 134     case 0x0010:
 135         val = s->invalid_address_register;
 136         break;
 137     /* DMA transl. table base */
 138     case 0x0018:
 139         val = s->dma_tl_base;
 140         break;
 141     /* DMA transl. table limit */
 142     case 0x0020:
 143         val = s->dma_tl_limit;
 144         break;
 145     /* Remote Failed Address */
 146     case 0x0038:
 147         val = s->remote_failed_address;
 148         break;
 149     /* Memory Failed Address */
 150     case 0x0040:
 151         val = s->memory_failed_address;
 152         break;
 153     /* I/O Cache Byte Mask */
 154     case 0x0058:
 155         val = s->cache_bmask;
 156         /* HACK */
 157         if (s->cache_bmask == (uint32_t)-1) {
 158             s->cache_bmask = 0;
 159         }
 160         break;
 161     /* Remote Speed Registers */
 162     case 0x0070:
 163     case 0x0078:
 164     case 0x0080:
 165     case 0x0088:
 166     case 0x0090:
 167     case 0x0098:
 168     case 0x00a0:
 169     case 0x00a8:
 170     case 0x00b0:
 171     case 0x00b8:
 172     case 0x00c0:
 173     case 0x00c8:
 174     case 0x00d0:
 175     case 0x00d8:
 176     case 0x00e0:
 177     case 0x00e8:
 178         val = s->rem_speed[(addr - 0x0070) >> 3];
 179         break;
 180     /* DMA channel base address */
 181     case 0x0100:
 182     case 0x0108:
 183     case 0x0110:
 184     case 0x0118:
 185     case 0x0120:
 186     case 0x0128:
 187     case 0x0130:
 188     case 0x0138:
 189     case 0x0140:
 190     case 0x0148:
 191     case 0x0150:
 192     case 0x0158:
 193     case 0x0160:
 194     case 0x0168:
 195     case 0x0170:
 196     case 0x0178:
 197     case 0x0180:
 198     case 0x0188:
 199     case 0x0190:
 200     case 0x0198:
 201     case 0x01a0:
 202     case 0x01a8:
 203     case 0x01b0:
 204     case 0x01b8:
 205     case 0x01c0:
 206     case 0x01c8:
 207     case 0x01d0:
 208     case 0x01d8:
 209     case 0x01e0:
 210     case 0x01e8:
 211     case 0x01f0:
 212     case 0x01f8:
 213         {
 214             int entry = (addr - 0x0100) >> 5;
 215             int idx = (addr & 0x1f) >> 3;
 216             val = s->dma_regs[entry][idx];
 217         }
 218         break;
 219     /* Interrupt source */
 220     case 0x0200:
 221         val = s->nmi_interrupt;
 222         break;
 223     /* Error type */
 224     case 0x0208:
 225         val = 0;
 226         break;
 227     /* Memory refresh rate */
 228     case 0x0210:
 229         val = s->memory_refresh_rate;
 230         break;
 231     /* NV ram protect register */
 232     case 0x0220:
 233         val = s->nvram_protect;
 234         break;
 235     /* Interval timer count */
 236     case 0x0230:
 237         val = 0;
 238         qemu_irq_lower(s->timer_irq);
 239         break;
 240     /* EISA interrupt */
 241     case 0x0238:
 242         val = 7; /* FIXME: should be read from EISA controller */
 243         break;
 244     default:
 245         qemu_log_mask(LOG_GUEST_ERROR,
 246                       "rc4030: invalid read at 0x%x", (int)addr);
 247         val = 0;
 248         break;
 249     }
 250
 251     if ((addr & ~3) != 0x230) {
 252         trace_rc4030_read(addr, val);
 253     }
 254
 255     return val;
 256 }
 257
 258 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
 259                          unsigned int size)
 260 {
 261     rc4030State *s = opaque;
 262     uint32_t val = data;
 263     addr &= 0x3fff;
 264
 265     trace_rc4030_write(addr, val);
 266
 267     switch (addr & ~0x3) {
 268     /* Global config register */
 269     case 0x0000:
 270         s->config = val;
 271         break;
 272     /* DMA transl. table base */
 273     case 0x0018:
 274         s->dma_tl_base = val;
 275         break;
 276     /* DMA transl. table limit */
 277     case 0x0020:
 278         s->dma_tl_limit = val;
 279         break;
 280     /* DMA transl. table invalidated */
 281     case 0x0028:
 282         break;
 283     /* Cache Maintenance */
 284     case 0x0030:
 285         s->cache_maint = val;
 286         break;
 287     /* I/O Cache Physical Tag */
 288     case 0x0048:
 289         s->cache_ptag = val;
 290         break;
 291     /* I/O Cache Logical Tag */
 292     case 0x0050:
 293         s->cache_ltag = val;
 294         break;
 295     /* I/O Cache Byte Mask */
 296     case 0x0058:
 297         s->cache_bmask |= val; /* HACK */
 298         break;
 299     /* I/O Cache Buffer Window */
 300     case 0x0060:
 301         /* HACK */
 302         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
 303             hwaddr dest = s->cache_ptag & ~0x1;
 304             dest += (s->cache_maint & 0x3) << 3;
 305             cpu_physical_memory_write(dest, &val, 4);
 306         }
 307         break;
 308     /* Remote Speed Registers */
 309     case 0x0070:
 310     case 0x0078:
 311     case 0x0080:
 312     case 0x0088:
 313     case 0x0090:
 314     case 0x0098:
 315     case 0x00a0:
 316     case 0x00a8:
 317     case 0x00b0:
 318     case 0x00b8:
 319     case 0x00c0:
 320     case 0x00c8:
 321     case 0x00d0:
 322     case 0x00d8:
 323     case 0x00e0:
 324     case 0x00e8:
 325         s->rem_speed[(addr - 0x0070) >> 3] = val;
 326         break;
 327     /* DMA channel base address */
 328     case 0x0100:
 329     case 0x0108:
 330     case 0x0110:
 331     case 0x0118:
 332     case 0x0120:
 333     case 0x0128:
 334     case 0x0130:
 335     case 0x0138:
 336     case 0x0140:
 337     case 0x0148:
 338     case 0x0150:
 339     case 0x0158:
 340     case 0x0160:
 341     case 0x0168:
 342     case 0x0170:
 343     case 0x0178:
 344     case 0x0180:
 345     case 0x0188:
 346     case 0x0190:
 347     case 0x0198:
 348     case 0x01a0:
 349     case 0x01a8:
 350     case 0x01b0:
 351     case 0x01b8:
 352     case 0x01c0:
 353     case 0x01c8:
 354     case 0x01d0:
 355     case 0x01d8:
 356     case 0x01e0:
 357     case 0x01e8:
 358     case 0x01f0:
 359     case 0x01f8:
 360         {
 361             int entry = (addr - 0x0100) >> 5;
 362             int idx = (addr & 0x1f) >> 3;
 363             s->dma_regs[entry][idx] = val;
 364         }
 365         break;
 366     /* Memory refresh rate */
 367     case 0x0210:
 368         s->memory_refresh_rate = val;
 369         break;
 370     /* Interval timer reload */
 371     case 0x0228:
 372         s->itr = val & 0x01FF;
 373         qemu_irq_lower(s->timer_irq);
 374         set_next_tick(s);
 375         break;
 376     /* EISA interrupt */
 377     case 0x0238:
 378         break;
 379     default:
 380         qemu_log_mask(LOG_GUEST_ERROR,
 381                       "rc4030: invalid write of 0x%02x at 0x%x",
 382                       val, (int)addr);
 383         break;
 384     }
 385 }
 386
 387 static const MemoryRegionOps rc4030_ops = {
 388     .read = rc4030_read,
 389     .write = rc4030_write,
 390     .impl.min_access_size = 4,
 391     .impl.max_access_size = 4,
 392     .endianness = DEVICE_NATIVE_ENDIAN,
 393 };
 394
 395 static void update_jazz_irq(rc4030State *s)
 396 {
 397     uint16_t pending;
 398
 399     pending = s->isr_jazz & s->imr_jazz;
 400
 401     if (pending != 0)
 402         qemu_irq_raise(s->jazz_bus_irq);
 403     else
 404         qemu_irq_lower(s->jazz_bus_irq);
 405 }
 406
 407 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
 408 {
 409     rc4030State *s = opaque;
 410
 411     if (level) {
 412         s->isr_jazz |= 1 << irq;
 413     } else {
 414         s->isr_jazz &= ~(1 << irq);
 415     }
 416
 417     update_jazz_irq(s);
 418 }
 419
 420 static void rc4030_periodic_timer(void *opaque)
 421 {
 422     rc4030State *s = opaque;
 423
 424     set_next_tick(s);
 425     qemu_irq_raise(s->timer_irq);
 426 }
 427
 428 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
 429 {
 430     rc4030State *s = opaque;
 431     uint32_t val;
 432     uint32_t irq;
 433     addr &= 0xfff;
 434
 435     switch (addr) {
 436     /* Local bus int source */
 437     case 0x00: {
 438         uint32_t pending = s->isr_jazz & s->imr_jazz;
 439         val = 0;
 440         irq = 0;
 441         while (pending) {
 442             if (pending & 1) {
 443                 val = (irq + 1) << 2;
 444                 break;
 445             }
 446             irq++;
 447             pending >>= 1;
 448         }
 449         break;
 450     }
 451     /* Local bus int enable mask */
 452     case 0x02:
 453         val = s->imr_jazz;
 454         break;
 455     default:
 456         qemu_log_mask(LOG_GUEST_ERROR,
 457                       "rc4030/jazzio: invalid read at 0x%x", (int)addr);
 458         val = 0;
 459         break;
 460     }
 461
 462     trace_jazzio_read(addr, val);
 463
 464     return val;
 465 }
 466
 467 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
 468                          unsigned int size)
 469 {
 470     rc4030State *s = opaque;
 471     uint32_t val = data;
 472     addr &= 0xfff;
 473
 474     trace_jazzio_write(addr, val);
 475
 476     switch (addr) {
 477     /* Local bus int enable mask */
 478     case 0x02:
 479         s->imr_jazz = val;
 480         update_jazz_irq(s);
 481         break;
 482     default:
 483         qemu_log_mask(LOG_GUEST_ERROR,
 484                       "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
 485                       val, (int)addr);
 486         break;
 487     }
 488 }
 489
 490 static const MemoryRegionOps jazzio_ops = {
 491     .read = jazzio_read,
 492     .write = jazzio_write,
 493     .impl.min_access_size = 2,
 494     .impl.max_access_size = 2,
 495     .endianness = DEVICE_NATIVE_ENDIAN,
 496 };
 497
 498 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
 499                                           IOMMUAccessFlags flag, int iommu_idx)
 500 {
 501     rc4030State *s = container_of(iommu, rc4030State, dma_mr);
 502     IOMMUTLBEntry ret = {
 503         .target_as = &address_space_memory,
 504         .iova = addr & ~(DMA_PAGESIZE - 1),
 505         .translated_addr = 0,
 506         .addr_mask = DMA_PAGESIZE - 1,
 507         .perm = IOMMU_NONE,
 508     };
 509     uint64_t i, entry_address;
 510     dma_pagetable_entry entry;
 511
 512     i = addr / DMA_PAGESIZE;
 513     if (i < s->dma_tl_limit / sizeof(entry)) {
 514         entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
 515         if (address_space_read(ret.target_as, entry_address,
 516                                MEMTXATTRS_UNSPECIFIED, (unsigned char *)&entry,
 517                                sizeof(entry)) == MEMTX_OK) {
 518             ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
 519             ret.perm = IOMMU_RW;
 520         }
 521     }
 522
 523     return ret;
 524 }
 525
 526 static void rc4030_reset(DeviceState *dev)
 527 {
 528     rc4030State *s = RC4030(dev);
 529     int i;
 530
 531     s->config = 0x410; /* some boards seem to accept 0x104 too */
 532     s->revision = 1;
 533     s->invalid_address_register = 0;
 534
 535     memset(s->dma_regs, 0, sizeof(s->dma_regs));
 536
 537     s->remote_failed_address = s->memory_failed_address = 0;
 538     s->cache_maint = 0;
 539     s->cache_ptag = s->cache_ltag = 0;
 540     s->cache_bmask = 0;
 541
 542     s->memory_refresh_rate = 0x18186;
 543     s->nvram_protect = 7;
 544     for (i = 0; i < 15; i++) {
 545         s->rem_speed[i] = 7;
 546     }
 547     s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
 548     s->isr_jazz = 0;
 549
 550     s->itr = 0;
 551
 552     qemu_irq_lower(s->timer_irq);
 553     qemu_irq_lower(s->jazz_bus_irq);
 554 }
 555
 556 static int rc4030_post_load(void *opaque, int version_id)
 557 {
 558     rc4030State *s = opaque;
 559
 560     set_next_tick(s);
 561     update_jazz_irq(s);
 562
 563     return 0;
 564 }
 565
 566 static const VMStateDescription vmstate_rc4030 = {
 567     .name = "rc4030",
 568     .version_id = 3,
 569     .post_load = rc4030_post_load,
 570     .fields = (VMStateField []) {
 571         VMSTATE_UINT32(config, rc4030State),
 572         VMSTATE_UINT32(invalid_address_register, rc4030State),
 573         VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
 574         VMSTATE_UINT32(dma_tl_base, rc4030State),
 575         VMSTATE_UINT32(dma_tl_limit, rc4030State),
 576         VMSTATE_UINT32(cache_maint, rc4030State),
 577         VMSTATE_UINT32(remote_failed_address, rc4030State),
 578         VMSTATE_UINT32(memory_failed_address, rc4030State),
 579         VMSTATE_UINT32(cache_ptag, rc4030State),
 580         VMSTATE_UINT32(cache_ltag, rc4030State),
 581         VMSTATE_UINT32(cache_bmask, rc4030State),
 582         VMSTATE_UINT32(memory_refresh_rate, rc4030State),
 583         VMSTATE_UINT32(nvram_protect, rc4030State),
 584         VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
 585         VMSTATE_UINT32(imr_jazz, rc4030State),
 586         VMSTATE_UINT32(isr_jazz, rc4030State),
 587         VMSTATE_UINT32(itr, rc4030State),
 588         VMSTATE_END_OF_LIST()
 589     }
 590 };
 591
 592 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
 593 {
 594     rc4030State *s = opaque;
 595     hwaddr dma_addr;
 596     int dev_to_mem;
 597
 598     s->dma_regs[n][DMA_REG_ENABLE] &=
 599            ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
 600
 601     /* Check DMA channel consistency */
 602     dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
 603     if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
 604         (is_write != dev_to_mem)) {
 605         s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
 606         s->nmi_interrupt |= 1 << n;
 607         return;
 608     }
 609
 610     /* Get start address and len */
 611     if (len > s->dma_regs[n][DMA_REG_COUNT]) {
 612         len = s->dma_regs[n][DMA_REG_COUNT];
 613     }
 614     dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
 615
 616     /* Read/write data at right place */
 617     address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
 618                      buf, len, is_write);
 619
 620     s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
 621     s->dma_regs[n][DMA_REG_COUNT] -= len;
 622 }
 623
 624 struct rc4030DMAState {
 625     void *opaque;
 626     int n;
 627 };
 628
 629 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
 630 {
 631     rc4030_dma s = dma;
 632     rc4030_do_dma(s->opaque, s->n, buf, len, 0);
 633 }
 634
 635 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
 636 {
 637     rc4030_dma s = dma;
 638     rc4030_do_dma(s->opaque, s->n, buf, len, 1);
 639 }
 640
 641 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
 642 {
 643     rc4030_dma *s;
 644     struct rc4030DMAState *p;
 645     int i;
 646
 647     s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);
 648     p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);
 649     for (i = 0; i < n; i++) {
 650         p->opaque = opaque;
 651         p->n = i;
 652         s[i] = p;
 653         p++;
 654     }
 655     return s;
 656 }
 657
 658 static void rc4030_initfn(Object *obj)
 659 {
 660     DeviceState *dev = DEVICE(obj);
 661     rc4030State *s = RC4030(obj);
 662     SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
 663
 664     qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
 665
 666     sysbus_init_irq(sysbus, &s->timer_irq);
 667     sysbus_init_irq(sysbus, &s->jazz_bus_irq);
 668
 669     sysbus_init_mmio(sysbus, &s->iomem_chipset);
 670     sysbus_init_mmio(sysbus, &s->iomem_jazzio);
 671 }
 672
 673 static void rc4030_realize(DeviceState *dev, Error **errp)
 674 {
 675     rc4030State *s = RC4030(dev);
 676     Object *o = OBJECT(dev);
 677
 678     s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
 679                                      rc4030_periodic_timer, s);
 680
 681     memory_region_init_io(&s->iomem_chipset, NULL, &rc4030_ops, s,
 682                           "rc4030.chipset", 0x300);
 683     memory_region_init_io(&s->iomem_jazzio, NULL, &jazzio_ops, s,
 684                           "rc4030.jazzio", 0x00001000);
 685
 686     memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
 687                              TYPE_RC4030_IOMMU_MEMORY_REGION,
 688                              o, "rc4030.dma", 4 * GiB);
 689     address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
 690 }
 691
 692 static void rc4030_unrealize(DeviceState *dev, Error **errp)
 693 {
 694     rc4030State *s = RC4030(dev);
 695
 696     timer_free(s->periodic_timer);
 697
 698     address_space_destroy(&s->dma_as);
 699     object_unparent(OBJECT(&s->dma_mr));
 700 }
 701
 702 static void rc4030_class_init(ObjectClass *klass, void *class_data)
 703 {
 704     DeviceClass *dc = DEVICE_CLASS(klass);
 705
 706     dc->realize = rc4030_realize;
 707     dc->unrealize = rc4030_unrealize;
 708     dc->reset = rc4030_reset;
 709     dc->vmsd = &vmstate_rc4030;
 710 }
 711
 712 static const TypeInfo rc4030_info = {
 713     .name = TYPE_RC4030,
 714     .parent = TYPE_SYS_BUS_DEVICE,
 715     .instance_size = sizeof(rc4030State),
 716     .instance_init = rc4030_initfn,
 717     .class_init = rc4030_class_init,
 718 };
 719
 720 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
 721                                                   void *data)
 722 {
 723     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
 724
 725     imrc->translate = rc4030_dma_translate;
 726 }
 727
 728 static const TypeInfo rc4030_iommu_memory_region_info = {
 729     .parent = TYPE_IOMMU_MEMORY_REGION,
 730     .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
 731     .class_init = rc4030_iommu_memory_region_class_init,
 732 };
 733
 734 static void rc4030_register_types(void)
 735 {
 736     type_register_static(&rc4030_info);
 737     type_register_static(&rc4030_iommu_memory_region_info);
 738 }
 739
 740 type_init(rc4030_register_types)
 741
 742 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
 743 {
 744     DeviceState *dev;
 745
 746     dev = qdev_create(NULL, TYPE_RC4030);
 747     qdev_init_nofail(dev);
 748
 749     *dmas = rc4030_allocate_dmas(dev, 4);
 750     *dma_mr = &RC4030(dev)->dma_mr;
 751     return dev;
 752 }