4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
26 #include "qemu/osdep.h"
27 #include "hw/ide/internal.h"
28 #include "hw/scsi/scsi.h"
29 #include "sysemu/block-backend.h"
31 static void ide_atapi_cmd_read_dma_cb(void *opaque
, int ret
);
33 static void padstr8(uint8_t *buf
, int buf_size
, const char *src
)
36 for(i
= 0; i
< buf_size
; i
++) {
44 static inline void cpu_to_ube16(uint8_t *buf
, int val
)
50 static inline void cpu_to_ube32(uint8_t *buf
, unsigned int val
)
58 static inline int ube16_to_cpu(const uint8_t *buf
)
60 return (buf
[0] << 8) | buf
[1];
63 static inline int ube32_to_cpu(const uint8_t *buf
)
65 return (buf
[0] << 24) | (buf
[1] << 16) | (buf
[2] << 8) | buf
[3];
68 static void lba_to_msf(uint8_t *buf
, int lba
)
71 buf
[0] = (lba
/ 75) / 60;
72 buf
[1] = (lba
/ 75) % 60;
76 static inline int media_present(IDEState
*s
)
78 return !s
->tray_open
&& s
->nb_sectors
> 0;
81 /* XXX: DVDs that could fit on a CD will be reported as a CD */
82 static inline int media_is_dvd(IDEState
*s
)
84 return (media_present(s
) && s
->nb_sectors
> CD_MAX_SECTORS
);
87 static inline int media_is_cd(IDEState
*s
)
89 return (media_present(s
) && s
->nb_sectors
<= CD_MAX_SECTORS
);
92 static void cd_data_to_raw(uint8_t *buf
, int lba
)
96 memset(buf
+ 1, 0xff, 10);
100 lba_to_msf(buf
, lba
);
101 buf
[3] = 0x01; /* mode 1 data */
105 /* XXX: ECC not computed */
110 cd_read_sector_sync(IDEState
*s
)
113 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
114 4 * BDRV_SECTOR_SIZE
, BLOCK_ACCT_READ
);
116 #ifdef DEBUG_IDE_ATAPI
117 printf("cd_read_sector_sync: lba=%d\n", s
->lba
);
120 switch (s
->cd_sector_size
) {
122 ret
= blk_read(s
->blk
, (int64_t)s
->lba
<< 2,
126 ret
= blk_read(s
->blk
, (int64_t)s
->lba
<< 2,
127 s
->io_buffer
+ 16, 4);
129 cd_data_to_raw(s
->io_buffer
, s
->lba
);
133 block_acct_invalid(blk_get_stats(s
->blk
), BLOCK_ACCT_READ
);
138 block_acct_failed(blk_get_stats(s
->blk
), &s
->acct
);
140 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
142 s
->io_buffer_index
= 0;
148 static void cd_read_sector_cb(void *opaque
, int ret
)
150 IDEState
*s
= opaque
;
152 #ifdef DEBUG_IDE_ATAPI
153 printf("cd_read_sector_cb: lba=%d ret=%d\n", s
->lba
, ret
);
157 block_acct_failed(blk_get_stats(s
->blk
), &s
->acct
);
158 ide_atapi_io_error(s
, ret
);
162 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
164 if (s
->cd_sector_size
== 2352) {
165 cd_data_to_raw(s
->io_buffer
, s
->lba
);
169 s
->io_buffer_index
= 0;
170 s
->status
&= ~BUSY_STAT
;
172 ide_atapi_cmd_reply_end(s
);
175 static int cd_read_sector(IDEState
*s
)
177 if (s
->cd_sector_size
!= 2048 && s
->cd_sector_size
!= 2352) {
178 block_acct_invalid(blk_get_stats(s
->blk
), BLOCK_ACCT_READ
);
182 s
->iov
.iov_base
= (s
->cd_sector_size
== 2352) ?
183 s
->io_buffer
+ 16 : s
->io_buffer
;
185 s
->iov
.iov_len
= 4 * BDRV_SECTOR_SIZE
;
186 qemu_iovec_init_external(&s
->qiov
, &s
->iov
, 1);
188 #ifdef DEBUG_IDE_ATAPI
189 printf("cd_read_sector: lba=%d\n", s
->lba
);
192 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
193 4 * BDRV_SECTOR_SIZE
, BLOCK_ACCT_READ
);
195 ide_buffered_readv(s
, (int64_t)s
->lba
<< 2, &s
->qiov
, 4,
196 cd_read_sector_cb
, s
);
198 s
->status
|= BUSY_STAT
;
202 void ide_atapi_cmd_ok(IDEState
*s
)
205 s
->status
= READY_STAT
| SEEK_STAT
;
206 s
->nsector
= (s
->nsector
& ~7) | ATAPI_INT_REASON_IO
| ATAPI_INT_REASON_CD
;
207 ide_transfer_stop(s
);
211 void ide_atapi_cmd_error(IDEState
*s
, int sense_key
, int asc
)
213 #ifdef DEBUG_IDE_ATAPI
214 printf("atapi_cmd_error: sense=0x%x asc=0x%x\n", sense_key
, asc
);
216 s
->error
= sense_key
<< 4;
217 s
->status
= READY_STAT
| ERR_STAT
;
218 s
->nsector
= (s
->nsector
& ~7) | ATAPI_INT_REASON_IO
| ATAPI_INT_REASON_CD
;
219 s
->sense_key
= sense_key
;
221 ide_transfer_stop(s
);
225 void ide_atapi_io_error(IDEState
*s
, int ret
)
227 /* XXX: handle more errors */
228 if (ret
== -ENOMEDIUM
) {
229 ide_atapi_cmd_error(s
, NOT_READY
,
230 ASC_MEDIUM_NOT_PRESENT
);
232 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
233 ASC_LOGICAL_BLOCK_OOR
);
237 static uint16_t atapi_byte_count_limit(IDEState
*s
)
241 bcl
= s
->lcyl
| (s
->hcyl
<< 8);
248 /* The whole ATAPI transfer logic is handled in this function */
249 void ide_atapi_cmd_reply_end(IDEState
*s
)
251 int byte_count_limit
, size
, ret
;
252 #ifdef DEBUG_IDE_ATAPI
253 printf("reply: tx_size=%d elem_tx_size=%d index=%d\n",
254 s
->packet_transfer_size
,
255 s
->elementary_transfer_size
,
258 if (s
->packet_transfer_size
<= 0) {
259 /* end of transfer */
262 #ifdef DEBUG_IDE_ATAPI
263 printf("end of transfer, status=0x%x\n", s
->status
);
266 /* see if a new sector must be read */
267 if (s
->lba
!= -1 && s
->io_buffer_index
>= s
->cd_sector_size
) {
268 if (!s
->elementary_transfer_size
) {
269 ret
= cd_read_sector(s
);
271 ide_atapi_io_error(s
, ret
);
275 /* rebuffering within an elementary transfer is
276 * only possible with a sync request because we
277 * end up with a race condition otherwise */
278 ret
= cd_read_sector_sync(s
);
280 ide_atapi_io_error(s
, ret
);
285 if (s
->elementary_transfer_size
> 0) {
286 /* there are some data left to transmit in this elementary
288 size
= s
->cd_sector_size
- s
->io_buffer_index
;
289 if (size
> s
->elementary_transfer_size
)
290 size
= s
->elementary_transfer_size
;
291 s
->packet_transfer_size
-= size
;
292 s
->elementary_transfer_size
-= size
;
293 s
->io_buffer_index
+= size
;
294 ide_transfer_start(s
, s
->io_buffer
+ s
->io_buffer_index
- size
,
295 size
, ide_atapi_cmd_reply_end
);
297 /* a new transfer is needed */
298 s
->nsector
= (s
->nsector
& ~7) | ATAPI_INT_REASON_IO
;
299 byte_count_limit
= atapi_byte_count_limit(s
);
300 #ifdef DEBUG_IDE_ATAPI
301 printf("byte_count_limit=%d\n", byte_count_limit
);
303 size
= s
->packet_transfer_size
;
304 if (size
> byte_count_limit
) {
305 /* byte count limit must be even if this case */
306 if (byte_count_limit
& 1)
308 size
= byte_count_limit
;
312 s
->elementary_transfer_size
= size
;
313 /* we cannot transmit more than one sector at a time */
315 if (size
> (s
->cd_sector_size
- s
->io_buffer_index
))
316 size
= (s
->cd_sector_size
- s
->io_buffer_index
);
318 s
->packet_transfer_size
-= size
;
319 s
->elementary_transfer_size
-= size
;
320 s
->io_buffer_index
+= size
;
321 ide_transfer_start(s
, s
->io_buffer
+ s
->io_buffer_index
- size
,
322 size
, ide_atapi_cmd_reply_end
);
324 #ifdef DEBUG_IDE_ATAPI
325 printf("status=0x%x\n", s
->status
);
331 /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
332 static void ide_atapi_cmd_reply(IDEState
*s
, int size
, int max_size
)
336 s
->lba
= -1; /* no sector read */
337 s
->packet_transfer_size
= size
;
338 s
->io_buffer_size
= size
; /* dma: send the reply data as one chunk */
339 s
->elementary_transfer_size
= 0;
342 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
, size
,
344 s
->status
= READY_STAT
| SEEK_STAT
| DRQ_STAT
;
345 ide_start_dma(s
, ide_atapi_cmd_read_dma_cb
);
347 s
->status
= READY_STAT
| SEEK_STAT
;
348 s
->io_buffer_index
= 0;
349 ide_atapi_cmd_reply_end(s
);
353 /* start a CD-CDROM read command */
354 static void ide_atapi_cmd_read_pio(IDEState
*s
, int lba
, int nb_sectors
,
358 s
->packet_transfer_size
= nb_sectors
* sector_size
;
359 s
->elementary_transfer_size
= 0;
360 s
->io_buffer_index
= sector_size
;
361 s
->cd_sector_size
= sector_size
;
363 ide_atapi_cmd_reply_end(s
);
366 static void ide_atapi_cmd_check_status(IDEState
*s
)
368 #ifdef DEBUG_IDE_ATAPI
369 printf("atapi_cmd_check_status\n");
371 s
->error
= MC_ERR
| (UNIT_ATTENTION
<< 4);
372 s
->status
= ERR_STAT
;
376 /* ATAPI DMA support */
378 static void ide_atapi_cmd_read_dma_cb(void *opaque
, int ret
)
380 IDEState
*s
= opaque
;
384 if (ide_handle_rw_error(s
, -ret
, ide_dma_cmd_to_retry(s
->dma_cmd
))) {
385 if (s
->bus
->error_status
) {
392 if (s
->io_buffer_size
> 0) {
394 * For a cdrom read sector command (s->lba != -1),
395 * adjust the lba for the next s->io_buffer_size chunk
396 * and dma the current chunk.
397 * For a command != read (s->lba == -1), just transfer
401 if (s
->cd_sector_size
== 2352) {
403 cd_data_to_raw(s
->io_buffer
, s
->lba
);
405 n
= s
->io_buffer_size
>> 11;
409 s
->packet_transfer_size
-= s
->io_buffer_size
;
410 if (s
->bus
->dma
->ops
->rw_buf(s
->bus
->dma
, 1) == 0)
414 if (s
->packet_transfer_size
<= 0) {
415 s
->status
= READY_STAT
| SEEK_STAT
;
416 s
->nsector
= (s
->nsector
& ~7) | ATAPI_INT_REASON_IO
| ATAPI_INT_REASON_CD
;
421 s
->io_buffer_index
= 0;
422 if (s
->cd_sector_size
== 2352) {
424 s
->io_buffer_size
= s
->cd_sector_size
;
427 n
= s
->packet_transfer_size
>> 11;
428 if (n
> (IDE_DMA_BUF_SECTORS
/ 4))
429 n
= (IDE_DMA_BUF_SECTORS
/ 4);
430 s
->io_buffer_size
= n
* 2048;
434 printf("aio_read_cd: lba=%u n=%d\n", s
->lba
, n
);
437 s
->bus
->dma
->iov
.iov_base
= (void *)(s
->io_buffer
+ data_offset
);
438 s
->bus
->dma
->iov
.iov_len
= n
* 4 * 512;
439 qemu_iovec_init_external(&s
->bus
->dma
->qiov
, &s
->bus
->dma
->iov
, 1);
441 s
->bus
->dma
->aiocb
= ide_buffered_readv(s
, (int64_t)s
->lba
<< 2,
442 &s
->bus
->dma
->qiov
, n
* 4,
443 ide_atapi_cmd_read_dma_cb
, s
);
448 block_acct_failed(blk_get_stats(s
->blk
), &s
->acct
);
450 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
452 ide_set_inactive(s
, false);
455 /* start a CD-CDROM read command with DMA */
456 /* XXX: test if DMA is available */
457 static void ide_atapi_cmd_read_dma(IDEState
*s
, int lba
, int nb_sectors
,
461 s
->packet_transfer_size
= nb_sectors
* sector_size
;
462 s
->io_buffer_size
= 0;
463 s
->cd_sector_size
= sector_size
;
465 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
, s
->packet_transfer_size
,
468 /* XXX: check if BUSY_STAT should be set */
469 s
->status
= READY_STAT
| SEEK_STAT
| DRQ_STAT
| BUSY_STAT
;
470 ide_start_dma(s
, ide_atapi_cmd_read_dma_cb
);
473 static void ide_atapi_cmd_read(IDEState
*s
, int lba
, int nb_sectors
,
476 #ifdef DEBUG_IDE_ATAPI
477 printf("read %s: LBA=%d nb_sectors=%d\n", s
->atapi_dma
? "dma" : "pio",
481 ide_atapi_cmd_read_dma(s
, lba
, nb_sectors
, sector_size
);
483 ide_atapi_cmd_read_pio(s
, lba
, nb_sectors
, sector_size
);
487 void ide_atapi_dma_restart(IDEState
*s
)
490 * At this point we can just re-evaluate the packet command and start over.
491 * The presence of ->dma_cb callback in the pre_save ensures that the packet
492 * command has been completely sent and we can safely restart command.
494 s
->unit
= s
->bus
->retry_unit
;
495 s
->bus
->dma
->ops
->restart_dma(s
->bus
->dma
);
499 static inline uint8_t ide_atapi_set_profile(uint8_t *buf
, uint8_t *index
,
502 uint8_t *buf_profile
= buf
+ 12; /* start of profiles */
504 buf_profile
+= ((*index
) * 4); /* start of indexed profile */
505 cpu_to_ube16 (buf_profile
, profile
);
506 buf_profile
[2] = ((buf_profile
[0] == buf
[6]) && (buf_profile
[1] == buf
[7]));
508 /* each profile adds 4 bytes to the response */
510 buf
[11] += 4; /* Additional Length */
515 static int ide_dvd_read_structure(IDEState
*s
, int format
,
516 const uint8_t *packet
, uint8_t *buf
)
519 case 0x0: /* Physical format information */
521 int layer
= packet
[6];
522 uint64_t total_sectors
;
525 return -ASC_INV_FIELD_IN_CMD_PACKET
;
527 total_sectors
= s
->nb_sectors
>> 2;
528 if (total_sectors
== 0) {
529 return -ASC_MEDIUM_NOT_PRESENT
;
532 buf
[4] = 1; /* DVD-ROM, part version 1 */
533 buf
[5] = 0xf; /* 120mm disc, minimum rate unspecified */
534 buf
[6] = 1; /* one layer, read-only (per MMC-2 spec) */
535 buf
[7] = 0; /* default densities */
537 /* FIXME: 0x30000 per spec? */
538 cpu_to_ube32(buf
+ 8, 0); /* start sector */
539 cpu_to_ube32(buf
+ 12, total_sectors
- 1); /* end sector */
540 cpu_to_ube32(buf
+ 16, total_sectors
- 1); /* l0 end sector */
542 /* Size of buffer, not including 2 byte size field */
543 stw_be_p(buf
, 2048 + 2);
545 /* 2k data + 4 byte header */
549 case 0x01: /* DVD copyright information */
550 buf
[4] = 0; /* no copyright data */
551 buf
[5] = 0; /* no region restrictions */
553 /* Size of buffer, not including 2 byte size field */
554 stw_be_p(buf
, 4 + 2);
556 /* 4 byte header + 4 byte data */
559 case 0x03: /* BCA information - invalid field for no BCA info */
560 return -ASC_INV_FIELD_IN_CMD_PACKET
;
562 case 0x04: /* DVD disc manufacturing information */
563 /* Size of buffer, not including 2 byte size field */
564 stw_be_p(buf
, 2048 + 2);
566 /* 2k data + 4 byte header */
571 * This lists all the command capabilities above. Add new ones
572 * in order and update the length and buffer return values.
575 buf
[4] = 0x00; /* Physical format */
576 buf
[5] = 0x40; /* Not writable, is readable */
577 stw_be_p(buf
+ 6, 2048 + 4);
579 buf
[8] = 0x01; /* Copyright info */
580 buf
[9] = 0x40; /* Not writable, is readable */
581 stw_be_p(buf
+ 10, 4 + 4);
583 buf
[12] = 0x03; /* BCA info */
584 buf
[13] = 0x40; /* Not writable, is readable */
585 stw_be_p(buf
+ 14, 188 + 4);
587 buf
[16] = 0x04; /* Manufacturing info */
588 buf
[17] = 0x40; /* Not writable, is readable */
589 stw_be_p(buf
+ 18, 2048 + 4);
591 /* Size of buffer, not including 2 byte size field */
592 stw_be_p(buf
, 16 + 2);
594 /* data written + 4 byte header */
597 default: /* TODO: formats beyond DVD-ROM requires */
598 return -ASC_INV_FIELD_IN_CMD_PACKET
;
602 static unsigned int event_status_media(IDEState
*s
,
605 uint8_t event_code
, media_status
;
609 media_status
= MS_TRAY_OPEN
;
610 } else if (blk_is_inserted(s
->blk
)) {
611 media_status
= MS_MEDIA_PRESENT
;
614 /* Event notification descriptor */
615 event_code
= MEC_NO_CHANGE
;
616 if (media_status
!= MS_TRAY_OPEN
) {
617 if (s
->events
.new_media
) {
618 event_code
= MEC_NEW_MEDIA
;
619 s
->events
.new_media
= false;
620 } else if (s
->events
.eject_request
) {
621 event_code
= MEC_EJECT_REQUESTED
;
622 s
->events
.eject_request
= false;
627 buf
[5] = media_status
;
629 /* These fields are reserved, just clear them. */
633 return 8; /* We wrote to 4 extra bytes from the header */
636 static void cmd_get_event_status_notification(IDEState
*s
,
639 const uint8_t *packet
= buf
;
643 uint8_t polled
; /* lsb bit is polled; others are reserved */
644 uint8_t reserved2
[2];
646 uint8_t reserved3
[2];
649 } QEMU_PACKED
*gesn_cdb
;
653 uint8_t notification_class
;
654 uint8_t supported_events
;
655 } QEMU_PACKED
*gesn_event_header
;
656 unsigned int max_len
, used_len
;
658 gesn_cdb
= (void *)packet
;
659 gesn_event_header
= (void *)buf
;
661 max_len
= be16_to_cpu(gesn_cdb
->len
);
663 /* It is fine by the MMC spec to not support async mode operations */
664 if (!(gesn_cdb
->polled
& 0x01)) { /* asynchronous mode */
665 /* Only polling is supported, asynchronous mode is not. */
666 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
667 ASC_INV_FIELD_IN_CMD_PACKET
);
671 /* polling mode operation */
674 * These are the supported events.
676 * We currently only support requests of the 'media' type.
677 * Notification class requests and supported event classes are bitmasks,
678 * but they are build from the same values as the "notification class"
681 gesn_event_header
->supported_events
= 1 << GESN_MEDIA
;
684 * We use |= below to set the class field; other bits in this byte
685 * are reserved now but this is useful to do if we have to use the
686 * reserved fields later.
688 gesn_event_header
->notification_class
= 0;
691 * Responses to requests are to be based on request priority. The
692 * notification_class_request_type enum above specifies the
693 * priority: upper elements are higher prio than lower ones.
695 if (gesn_cdb
->class & (1 << GESN_MEDIA
)) {
696 gesn_event_header
->notification_class
|= GESN_MEDIA
;
697 used_len
= event_status_media(s
, buf
);
699 gesn_event_header
->notification_class
= 0x80; /* No event available */
700 used_len
= sizeof(*gesn_event_header
);
702 gesn_event_header
->len
= cpu_to_be16(used_len
703 - sizeof(*gesn_event_header
));
704 ide_atapi_cmd_reply(s
, used_len
, max_len
);
707 static void cmd_request_sense(IDEState
*s
, uint8_t *buf
)
709 int max_len
= buf
[4];
712 buf
[0] = 0x70 | (1 << 7);
713 buf
[2] = s
->sense_key
;
717 if (s
->sense_key
== UNIT_ATTENTION
) {
718 s
->sense_key
= NO_SENSE
;
721 ide_atapi_cmd_reply(s
, 18, max_len
);
724 static void cmd_inquiry(IDEState
*s
, uint8_t *buf
)
726 uint8_t page_code
= buf
[2];
727 int max_len
= buf
[4];
731 unsigned preamble_len
;
733 /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
734 * we are being asked for a specific page of info indicated by byte 2. */
739 buf
[idx
++] = 0x05; /* CD-ROM */
740 buf
[idx
++] = page_code
; /* Page Code */
741 buf
[idx
++] = 0x00; /* reserved */
742 idx
++; /* length (set later) */
746 /* Supported Pages: List of supported VPD responses. */
747 buf
[idx
++] = 0x00; /* 0x00: Supported Pages, and: */
748 buf
[idx
++] = 0x83; /* 0x83: Device Identification. */
752 /* Device Identification. Each entry is optional, but the entries
753 * included here are modeled after libata's VPD responses.
754 * If the response is given, at least one entry must be present. */
756 /* Entry 1: Serial */
757 if (idx
+ 24 > max_len
) {
758 /* Not enough room for even the first entry: */
759 /* 4 byte header + 20 byte string */
760 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
761 ASC_DATA_PHASE_ERROR
);
764 buf
[idx
++] = 0x02; /* Ascii */
765 buf
[idx
++] = 0x00; /* Vendor Specific */
767 buf
[idx
++] = 20; /* Remaining length */
768 padstr8(buf
+ idx
, 20, s
->drive_serial_str
);
771 /* Entry 2: Drive Model and Serial */
772 if (idx
+ 72 > max_len
) {
773 /* 4 (header) + 8 (vendor) + 60 (model & serial) */
776 buf
[idx
++] = 0x02; /* Ascii */
777 buf
[idx
++] = 0x01; /* T10 Vendor */
780 padstr8(buf
+ idx
, 8, "ATA"); /* Generic T10 vendor */
782 padstr8(buf
+ idx
, 40, s
->drive_model_str
);
784 padstr8(buf
+ idx
, 20, s
->drive_serial_str
);
788 if (s
->wwn
&& (idx
+ 12 <= max_len
)) {
789 /* 4 byte header + 8 byte wwn */
790 buf
[idx
++] = 0x01; /* Binary */
791 buf
[idx
++] = 0x03; /* NAA */
794 stq_be_p(&buf
[idx
], s
->wwn
);
800 /* SPC-3, revision 23 sec. 6.4 */
801 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
802 ASC_INV_FIELD_IN_CMD_PACKET
);
809 buf
[0] = 0x05; /* CD-ROM */
810 buf
[1] = 0x80; /* removable */
811 buf
[2] = 0x00; /* ISO */
812 buf
[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
813 /* buf[size_idx] set below. */
814 buf
[5] = 0; /* reserved */
815 buf
[6] = 0; /* reserved */
816 buf
[7] = 0; /* reserved */
817 padstr8(buf
+ 8, 8, "QEMU");
818 padstr8(buf
+ 16, 16, "QEMU DVD-ROM");
819 padstr8(buf
+ 32, 4, s
->version
);
824 buf
[size_idx
] = idx
- preamble_len
;
825 ide_atapi_cmd_reply(s
, idx
, max_len
);
828 static void cmd_get_configuration(IDEState
*s
, uint8_t *buf
)
834 /* only feature 0 is supported */
835 if (buf
[2] != 0 || buf
[3] != 0) {
836 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
837 ASC_INV_FIELD_IN_CMD_PACKET
);
841 /* XXX: could result in alignment problems in some architectures */
842 max_len
= ube16_to_cpu(buf
+ 7);
845 * XXX: avoid overflow for io_buffer if max_len is bigger than
846 * the size of that buffer (dimensioned to max number of
847 * sectors to transfer at once)
849 * Only a problem if the feature/profiles grow.
852 /* XXX: assume 1 sector */
856 memset(buf
, 0, max_len
);
858 * the number of sectors from the media tells us which profile
859 * to use as current. 0 means there is no media
861 if (media_is_dvd(s
)) {
862 cpu_to_ube16(buf
+ 6, MMC_PROFILE_DVD_ROM
);
863 } else if (media_is_cd(s
)) {
864 cpu_to_ube16(buf
+ 6, MMC_PROFILE_CD_ROM
);
867 buf
[10] = 0x02 | 0x01; /* persistent and current */
868 len
= 12; /* headers: 8 + 4 */
869 len
+= ide_atapi_set_profile(buf
, &index
, MMC_PROFILE_DVD_ROM
);
870 len
+= ide_atapi_set_profile(buf
, &index
, MMC_PROFILE_CD_ROM
);
871 cpu_to_ube32(buf
, len
- 4); /* data length */
873 ide_atapi_cmd_reply(s
, len
, max_len
);
876 static void cmd_mode_sense(IDEState
*s
, uint8_t *buf
)
881 max_len
= ube16_to_cpu(buf
+ 7);
882 action
= buf
[2] >> 6;
883 code
= buf
[2] & 0x3f;
886 case 0: /* current values */
888 case MODE_PAGE_R_W_ERROR
: /* error recovery */
889 cpu_to_ube16(&buf
[0], 16 - 2);
897 buf
[8] = MODE_PAGE_R_W_ERROR
;
905 ide_atapi_cmd_reply(s
, 16, max_len
);
907 case MODE_PAGE_AUDIO_CTL
:
908 cpu_to_ube16(&buf
[0], 24 - 2);
916 buf
[8] = MODE_PAGE_AUDIO_CTL
;
918 /* Fill with CDROM audio volume */
924 ide_atapi_cmd_reply(s
, 24, max_len
);
926 case MODE_PAGE_CAPABILITIES
:
927 cpu_to_ube16(&buf
[0], 30 - 2);
935 buf
[8] = MODE_PAGE_CAPABILITIES
;
937 buf
[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
940 /* Claim PLAY_AUDIO capability (0x01) since some Linux
941 code checks for this to automount media. */
944 buf
[14] = (1 << 0) | (1 << 3) | (1 << 5);
945 if (s
->tray_locked
) {
948 buf
[15] = 0x00; /* No volume & mute control, no changer */
949 cpu_to_ube16(&buf
[16], 704); /* 4x read speed */
950 buf
[18] = 0; /* Two volume levels */
952 cpu_to_ube16(&buf
[20], 512); /* 512k buffer */
953 cpu_to_ube16(&buf
[22], 704); /* 4x read speed current */
960 ide_atapi_cmd_reply(s
, 30, max_len
);
966 case 1: /* changeable values */
968 case 2: /* default values */
971 case 3: /* saved values */
972 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
973 ASC_SAVING_PARAMETERS_NOT_SUPPORTED
);
979 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
, ASC_INV_FIELD_IN_CMD_PACKET
);
982 static void cmd_test_unit_ready(IDEState
*s
, uint8_t *buf
)
984 /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
985 * come here, we know that it's ready. */
989 static void cmd_prevent_allow_medium_removal(IDEState
*s
, uint8_t* buf
)
991 s
->tray_locked
= buf
[4] & 1;
992 blk_lock_medium(s
->blk
, buf
[4] & 1);
996 static void cmd_read(IDEState
*s
, uint8_t* buf
)
1000 if (buf
[0] == GPCMD_READ_10
) {
1001 nb_sectors
= ube16_to_cpu(buf
+ 7);
1003 nb_sectors
= ube32_to_cpu(buf
+ 6);
1006 lba
= ube32_to_cpu(buf
+ 2);
1007 if (nb_sectors
== 0) {
1008 ide_atapi_cmd_ok(s
);
1012 ide_atapi_cmd_read(s
, lba
, nb_sectors
, 2048);
1015 static void cmd_read_cd(IDEState
*s
, uint8_t* buf
)
1017 int nb_sectors
, lba
, transfer_request
;
1019 nb_sectors
= (buf
[6] << 16) | (buf
[7] << 8) | buf
[8];
1020 lba
= ube32_to_cpu(buf
+ 2);
1022 if (nb_sectors
== 0) {
1023 ide_atapi_cmd_ok(s
);
1027 transfer_request
= buf
[9];
1028 switch(transfer_request
& 0xf8) {
1031 ide_atapi_cmd_ok(s
);
1035 ide_atapi_cmd_read(s
, lba
, nb_sectors
, 2048);
1039 ide_atapi_cmd_read(s
, lba
, nb_sectors
, 2352);
1042 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1043 ASC_INV_FIELD_IN_CMD_PACKET
);
1048 static void cmd_seek(IDEState
*s
, uint8_t* buf
)
1051 uint64_t total_sectors
= s
->nb_sectors
>> 2;
1053 lba
= ube32_to_cpu(buf
+ 2);
1054 if (lba
>= total_sectors
) {
1055 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
, ASC_LOGICAL_BLOCK_OOR
);
1059 ide_atapi_cmd_ok(s
);
1062 static void cmd_start_stop_unit(IDEState
*s
, uint8_t* buf
)
1065 bool start
= buf
[4] & 1;
1066 bool loej
= buf
[4] & 2; /* load on start, eject on !start */
1067 int pwrcnd
= buf
[4] & 0xf0;
1070 /* eject/load only happens for power condition == 0 */
1071 ide_atapi_cmd_ok(s
);
1076 if (!start
&& !s
->tray_open
&& s
->tray_locked
) {
1077 sense
= blk_is_inserted(s
->blk
)
1078 ? NOT_READY
: ILLEGAL_REQUEST
;
1079 ide_atapi_cmd_error(s
, sense
, ASC_MEDIA_REMOVAL_PREVENTED
);
1083 if (s
->tray_open
!= !start
) {
1084 blk_eject(s
->blk
, !start
);
1085 s
->tray_open
= !start
;
1089 ide_atapi_cmd_ok(s
);
1092 static void cmd_mechanism_status(IDEState
*s
, uint8_t* buf
)
1094 int max_len
= ube16_to_cpu(buf
+ 8);
1096 cpu_to_ube16(buf
, 0);
1097 /* no current LBA */
1102 cpu_to_ube16(buf
+ 6, 0);
1103 ide_atapi_cmd_reply(s
, 8, max_len
);
1106 static void cmd_read_toc_pma_atip(IDEState
*s
, uint8_t* buf
)
1108 int format
, msf
, start_track
, len
;
1110 uint64_t total_sectors
= s
->nb_sectors
>> 2;
1112 max_len
= ube16_to_cpu(buf
+ 7);
1113 format
= buf
[9] >> 6;
1114 msf
= (buf
[1] >> 1) & 1;
1115 start_track
= buf
[6];
1119 len
= cdrom_read_toc(total_sectors
, buf
, msf
, start_track
);
1122 ide_atapi_cmd_reply(s
, len
, max_len
);
1125 /* multi session : only a single session defined */
1130 ide_atapi_cmd_reply(s
, 12, max_len
);
1133 len
= cdrom_read_toc_raw(total_sectors
, buf
, msf
, start_track
);
1136 ide_atapi_cmd_reply(s
, len
, max_len
);
1140 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1141 ASC_INV_FIELD_IN_CMD_PACKET
);
1145 static void cmd_read_cdvd_capacity(IDEState
*s
, uint8_t* buf
)
1147 uint64_t total_sectors
= s
->nb_sectors
>> 2;
1149 /* NOTE: it is really the number of sectors minus 1 */
1150 cpu_to_ube32(buf
, total_sectors
- 1);
1151 cpu_to_ube32(buf
+ 4, 2048);
1152 ide_atapi_cmd_reply(s
, 8, 8);
1155 static void cmd_read_disc_information(IDEState
*s
, uint8_t* buf
)
1157 uint8_t type
= buf
[1] & 7;
1158 uint32_t max_len
= ube16_to_cpu(buf
+ 7);
1160 /* Types 1/2 are only defined for Blu-Ray. */
1162 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1163 ASC_INV_FIELD_IN_CMD_PACKET
);
1169 buf
[2] = 0xe; /* last session complete, disc finalized */
1170 buf
[3] = 1; /* first track on disc */
1171 buf
[4] = 1; /* # of sessions */
1172 buf
[5] = 1; /* first track of last session */
1173 buf
[6] = 1; /* last track of last session */
1174 buf
[7] = 0x20; /* unrestricted use */
1175 buf
[8] = 0x00; /* CD-ROM or DVD-ROM */
1176 /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1177 /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1178 /* 24-31: disc bar code */
1179 /* 32: disc application code */
1180 /* 33: number of OPC tables */
1182 ide_atapi_cmd_reply(s
, 34, max_len
);
1185 static void cmd_read_dvd_structure(IDEState
*s
, uint8_t* buf
)
1189 int format
= buf
[7];
1192 max_len
= ube16_to_cpu(buf
+ 8);
1194 if (format
< 0xff) {
1195 if (media_is_cd(s
)) {
1196 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1197 ASC_INCOMPATIBLE_FORMAT
);
1199 } else if (!media_present(s
)) {
1200 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1201 ASC_INV_FIELD_IN_CMD_PACKET
);
1206 memset(buf
, 0, max_len
> IDE_DMA_BUF_SECTORS
* 512 + 4 ?
1207 IDE_DMA_BUF_SECTORS
* 512 + 4 : max_len
);
1213 ret
= ide_dvd_read_structure(s
, format
, buf
, buf
);
1216 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
, -ret
);
1218 ide_atapi_cmd_reply(s
, ret
, max_len
);
1223 /* TODO: BD support, fall through for now */
1225 /* Generic disk structures */
1226 case 0x80: /* TODO: AACS volume identifier */
1227 case 0x81: /* TODO: AACS media serial number */
1228 case 0x82: /* TODO: AACS media identifier */
1229 case 0x83: /* TODO: AACS media key block */
1230 case 0x90: /* TODO: List of recognized format layers */
1231 case 0xc0: /* TODO: Write protection status */
1233 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
,
1234 ASC_INV_FIELD_IN_CMD_PACKET
);
1239 static void cmd_set_speed(IDEState
*s
, uint8_t* buf
)
1241 ide_atapi_cmd_ok(s
);
1246 * Only commands flagged as ALLOW_UA are allowed to run under a
1247 * unit attention condition. (See MMC-5, section 4.1.6.1)
1252 * Commands flagged with CHECK_READY can only execute if a medium is present.
1253 * Otherwise they report the Not Ready Condition. (See MMC-5, section
1259 * Commands flagged with NONDATA do not in any circumstances return
1260 * any data via ide_atapi_cmd_reply. These commands are exempt from
1261 * the normal byte_count_limit constraints.
1262 * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1267 static const struct AtapiCmd
{
1268 void (*handler
)(IDEState
*s
, uint8_t *buf
);
1270 } atapi_cmd_table
[0x100] = {
1271 [ 0x00 ] = { cmd_test_unit_ready
, CHECK_READY
| NONDATA
},
1272 [ 0x03 ] = { cmd_request_sense
, ALLOW_UA
},
1273 [ 0x12 ] = { cmd_inquiry
, ALLOW_UA
},
1274 [ 0x1b ] = { cmd_start_stop_unit
, NONDATA
}, /* [1] */
1275 [ 0x1e ] = { cmd_prevent_allow_medium_removal
, NONDATA
},
1276 [ 0x25 ] = { cmd_read_cdvd_capacity
, CHECK_READY
},
1277 [ 0x28 ] = { cmd_read
, /* (10) */ CHECK_READY
},
1278 [ 0x2b ] = { cmd_seek
, CHECK_READY
| NONDATA
},
1279 [ 0x43 ] = { cmd_read_toc_pma_atip
, CHECK_READY
},
1280 [ 0x46 ] = { cmd_get_configuration
, ALLOW_UA
},
1281 [ 0x4a ] = { cmd_get_event_status_notification
, ALLOW_UA
},
1282 [ 0x51 ] = { cmd_read_disc_information
, CHECK_READY
},
1283 [ 0x5a ] = { cmd_mode_sense
, /* (10) */ 0 },
1284 [ 0xa8 ] = { cmd_read
, /* (12) */ CHECK_READY
},
1285 [ 0xad ] = { cmd_read_dvd_structure
, CHECK_READY
},
1286 [ 0xbb ] = { cmd_set_speed
, NONDATA
},
1287 [ 0xbd ] = { cmd_mechanism_status
, 0 },
1288 [ 0xbe ] = { cmd_read_cd
, CHECK_READY
},
1289 /* [1] handler detects and reports not ready condition itself */
1292 void ide_atapi_cmd(IDEState
*s
)
1294 uint8_t *buf
= s
->io_buffer
;
1295 const struct AtapiCmd
*cmd
= &atapi_cmd_table
[s
->io_buffer
[0]];
1297 #ifdef DEBUG_IDE_ATAPI
1300 printf("ATAPI limit=0x%x packet:", s
->lcyl
| (s
->hcyl
<< 8));
1301 for(i
= 0; i
< ATAPI_PACKET_SIZE
; i
++) {
1302 printf(" %02x", buf
[i
]);
1309 * If there's a UNIT_ATTENTION condition pending, only command flagged with
1310 * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1311 * condition response unless a higher priority status, defined by the drive
1314 if (s
->sense_key
== UNIT_ATTENTION
&& !(cmd
->flags
& ALLOW_UA
)) {
1315 ide_atapi_cmd_check_status(s
);
1319 * When a CD gets changed, we have to report an ejected state and
1320 * then a loaded state to guests so that they detect tray
1321 * open/close and media change events. Guests that do not use
1322 * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1323 * states rely on this behavior.
1325 if (!(cmd
->flags
& ALLOW_UA
) &&
1326 !s
->tray_open
&& blk_is_inserted(s
->blk
) && s
->cdrom_changed
) {
1328 if (s
->cdrom_changed
== 1) {
1329 ide_atapi_cmd_error(s
, NOT_READY
, ASC_MEDIUM_NOT_PRESENT
);
1330 s
->cdrom_changed
= 2;
1332 ide_atapi_cmd_error(s
, UNIT_ATTENTION
, ASC_MEDIUM_MAY_HAVE_CHANGED
);
1333 s
->cdrom_changed
= 0;
1339 /* Report a Not Ready condition if appropriate for the command */
1340 if ((cmd
->flags
& CHECK_READY
) &&
1341 (!media_present(s
) || !blk_is_inserted(s
->blk
)))
1343 ide_atapi_cmd_error(s
, NOT_READY
, ASC_MEDIUM_NOT_PRESENT
);
1347 /* Nondata commands permit the byte_count_limit to be 0.
1348 * If this is a data-transferring PIO command and BCL is 0,
1349 * we abort at the /ATA/ level, not the ATAPI level.
1350 * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1351 if (cmd
->handler
&& !(cmd
->flags
& NONDATA
)) {
1352 /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */
1353 if (!(atapi_byte_count_limit(s
) || s
->atapi_dma
)) {
1354 /* TODO: Move abort back into core.c and make static inline again */
1355 ide_abort_command(s
);
1360 /* Execute the command */
1362 cmd
->handler(s
, buf
);
1366 ide_atapi_cmd_error(s
, ILLEGAL_REQUEST
, ASC_ILLEGAL_OPCODE
);