hw/ide/internal.h

   1 #ifndef HW_IDE_INTERNAL_H
   2 #define HW_IDE_INTERNAL_H
   3
   4 /*
   5  * QEMU IDE Emulation -- internal header file
   6  * only files in hw/ide/ are supposed to include this file.
   7  * non-internal declarations are in hw/ide.h
   8  */
   9 #include <hw/ide.h>
  10 #include "block_int.h"
  11 #include "iorange.h"
  12
  13 /* debug IDE devices */
  14 //#define DEBUG_IDE
  15 //#define DEBUG_IDE_ATAPI
  16 //#define DEBUG_AIO
  17 #define USE_DMA_CDROM
  18
  19 typedef struct IDEBus IDEBus;
  20 typedef struct IDEDevice IDEDevice;
  21 typedef struct IDEDeviceInfo IDEDeviceInfo;
  22 typedef struct IDEState IDEState;
  23 typedef struct BMDMAState BMDMAState;
  24
  25 /* Bits of HD_STATUS */
  26 #define ERR_STAT                0x01
  27 #define INDEX_STAT              0x02
  28 #define ECC_STAT                0x04    /* Corrected error */
  29 #define DRQ_STAT                0x08
  30 #define SEEK_STAT               0x10
  31 #define SRV_STAT                0x10
  32 #define WRERR_STAT              0x20
  33 #define READY_STAT              0x40
  34 #define BUSY_STAT               0x80
  35
  36 /* Bits for HD_ERROR */
  37 #define MARK_ERR                0x01    /* Bad address mark */
  38 #define TRK0_ERR                0x02    /* couldn't find track 0 */
  39 #define ABRT_ERR                0x04    /* Command aborted */
  40 #define MCR_ERR                 0x08    /* media change request */
  41 #define ID_ERR                  0x10    /* ID field not found */
  42 #define MC_ERR                  0x20    /* media changed */
  43 #define ECC_ERR                 0x40    /* Uncorrectable ECC error */
  44 #define BBD_ERR                 0x80    /* pre-EIDE meaning:  block marked bad */
  45 #define ICRC_ERR                0x80    /* new meaning:  CRC error during transfer */
  46
  47 /* Bits of HD_NSECTOR */
  48 #define CD                      0x01
  49 #define IO                      0x02
  50 #define REL                     0x04
  51 #define TAG_MASK                0xf8
  52
  53 #define IDE_CMD_RESET           0x04
  54 #define IDE_CMD_DISABLE_IRQ     0x02
  55
  56 /* ATA/ATAPI Commands pre T13 Spec */
  57 #define WIN_NOP                         0x00
  58 /*
  59  *      0x01->0x02 Reserved
  60  */
  61 #define CFA_REQ_EXT_ERROR_CODE          0x03 /* CFA Request Extended Error Code */
  62 /*
  63  *      0x04->0x07 Reserved
  64  */
  65 #define WIN_SRST                        0x08 /* ATAPI soft reset command */
  66 #define WIN_DEVICE_RESET                0x08
  67 /*
  68  *      0x09->0x0F Reserved
  69  */
  70 #define WIN_RECAL                       0x10
  71 #define WIN_RESTORE                     WIN_RECAL
  72 /*
  73  *      0x10->0x1F Reserved
  74  */
  75 #define WIN_READ                        0x20 /* 28-Bit */
  76 #define WIN_READ_ONCE                   0x21 /* 28-Bit without retries */
  77 #define WIN_READ_LONG                   0x22 /* 28-Bit */
  78 #define WIN_READ_LONG_ONCE              0x23 /* 28-Bit without retries */
  79 #define WIN_READ_EXT                    0x24 /* 48-Bit */
  80 #define WIN_READDMA_EXT                 0x25 /* 48-Bit */
  81 #define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit */
  82 #define WIN_READ_NATIVE_MAX_EXT         0x27 /* 48-Bit */
  83 /*
  84  *      0x28
  85  */
  86 #define WIN_MULTREAD_EXT                0x29 /* 48-Bit */
  87 /*
  88  *      0x2A->0x2F Reserved
  89  */
  90 #define WIN_WRITE                       0x30 /* 28-Bit */
  91 #define WIN_WRITE_ONCE                  0x31 /* 28-Bit without retries */
  92 #define WIN_WRITE_LONG                  0x32 /* 28-Bit */
  93 #define WIN_WRITE_LONG_ONCE             0x33 /* 28-Bit without retries */
  94 #define WIN_WRITE_EXT                   0x34 /* 48-Bit */
  95 #define WIN_WRITEDMA_EXT                0x35 /* 48-Bit */
  96 #define WIN_WRITEDMA_QUEUED_EXT         0x36 /* 48-Bit */
  97 #define WIN_SET_MAX_EXT                 0x37 /* 48-Bit */
  98 #define CFA_WRITE_SECT_WO_ERASE         0x38 /* CFA Write Sectors without erase */
  99 #define WIN_MULTWRITE_EXT               0x39 /* 48-Bit */
 100 /*
 101  *      0x3A->0x3B Reserved
 102  */
 103 #define WIN_WRITE_VERIFY                0x3C /* 28-Bit */
 104 /*
 105  *      0x3D->0x3F Reserved
 106  */
 107 #define WIN_VERIFY                      0x40 /* 28-Bit - Read Verify Sectors */
 108 #define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - without retries */
 109 #define WIN_VERIFY_EXT                  0x42 /* 48-Bit */
 110 /*
 111  *      0x43->0x4F Reserved
 112  */
 113 #define WIN_FORMAT                      0x50
 114 /*
 115  *      0x51->0x5F Reserved
 116  */
 117 #define WIN_INIT                        0x60
 118 /*
 119  *      0x61->0x5F Reserved
 120  */
 121 #define WIN_SEEK                        0x70 /* 0x70-0x7F Reserved */
 122 #define CFA_TRANSLATE_SECTOR            0x87 /* CFA Translate Sector */
 123 #define WIN_DIAGNOSE                    0x90
 124 #define WIN_SPECIFY                     0x91 /* set drive geometry translation */
 125 #define WIN_DOWNLOAD_MICROCODE          0x92
 126 #define WIN_STANDBYNOW2                 0x94
 127 #define CFA_IDLEIMMEDIATE               0x95 /* force drive to become "ready" */
 128 #define WIN_STANDBY2                    0x96
 129 #define WIN_SETIDLE2                    0x97
 130 #define WIN_CHECKPOWERMODE2             0x98
 131 #define WIN_SLEEPNOW2                   0x99
 132 /*
 133  *      0x9A VENDOR
 134  */
 135 #define WIN_PACKETCMD                   0xA0 /* Send a packet command. */
 136 #define WIN_PIDENTIFY                   0xA1 /* identify ATAPI device   */
 137 #define WIN_QUEUED_SERVICE              0xA2
 138 #define WIN_SMART                       0xB0 /* self-monitoring and reporting */
 139 #define CFA_ACCESS_METADATA_STORAGE     0xB8
 140 #define CFA_ERASE_SECTORS               0xC0 /* microdrives implement as NOP */
 141 #define WIN_MULTREAD                    0xC4 /* read sectors using multiple mode*/
 142 #define WIN_MULTWRITE                   0xC5 /* write sectors using multiple mode */
 143 #define WIN_SETMULT                     0xC6 /* enable/disable multiple mode */
 144 #define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers */
 145 #define WIN_READDMA                     0xC8 /* read sectors using DMA transfers */
 146 #define WIN_READDMA_ONCE                0xC9 /* 28-Bit - without retries */
 147 #define WIN_WRITEDMA                    0xCA /* write sectors using DMA transfers */
 148 #define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - without retries */
 149 #define WIN_WRITEDMA_QUEUED             0xCC /* write sectors using Queued DMA transfers */
 150 #define CFA_WRITE_MULTI_WO_ERASE        0xCD /* CFA Write multiple without erase */
 151 #define WIN_GETMEDIASTATUS              0xDA
 152 #define WIN_ACKMEDIACHANGE              0xDB /* ATA-1, ATA-2 vendor */
 153 #define WIN_POSTBOOT                    0xDC
 154 #define WIN_PREBOOT                     0xDD
 155 #define WIN_DOORLOCK                    0xDE /* lock door on removable drives */
 156 #define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives */
 157 #define WIN_STANDBYNOW1                 0xE0
 158 #define WIN_IDLEIMMEDIATE               0xE1 /* force drive to become "ready" */
 159 #define WIN_STANDBY                     0xE2 /* Set device in Standby Mode */
 160 #define WIN_SETIDLE1                    0xE3
 161 #define WIN_READ_BUFFER                 0xE4 /* force read only 1 sector */
 162 #define WIN_CHECKPOWERMODE1             0xE5
 163 #define WIN_SLEEPNOW1                   0xE6
 164 #define WIN_FLUSH_CACHE                 0xE7
 165 #define WIN_WRITE_BUFFER                0xE8 /* force write only 1 sector */
 166 #define WIN_WRITE_SAME                  0xE9 /* read ata-2 to use */
 167         /* SET_FEATURES 0x22 or 0xDD */
 168 #define WIN_FLUSH_CACHE_EXT             0xEA /* 48-Bit */
 169 #define WIN_IDENTIFY                    0xEC /* ask drive to identify itself    */
 170 #define WIN_MEDIAEJECT                  0xED
 171 #define WIN_IDENTIFY_DMA                0xEE /* same as WIN_IDENTIFY, but DMA */
 172 #define WIN_SETFEATURES                 0xEF /* set special drive features */
 173 #define EXABYTE_ENABLE_NEST             0xF0
 174 #define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature */
 175 #define WIN_SECURITY_SET_PASS           0xF1
 176 #define WIN_SECURITY_UNLOCK             0xF2
 177 #define WIN_SECURITY_ERASE_PREPARE      0xF3
 178 #define WIN_SECURITY_ERASE_UNIT         0xF4
 179 #define WIN_SECURITY_FREEZE_LOCK        0xF5
 180 #define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP */
 181 #define WIN_SECURITY_DISABLE            0xF6
 182 #define WIN_READ_NATIVE_MAX             0xF8 /* return the native maximum address */
 183 #define WIN_SET_MAX                     0xF9
 184 #define DISABLE_SEAGATE                 0xFB
 185
 186 /* set to 1 set disable mult support */
 187 #define MAX_MULT_SECTORS 16
 188
 189 #define IDE_DMA_BUF_SECTORS 256
 190
 191 #if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
 192 #error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
 193 #endif
 194
 195 /* ATAPI defines */
 196
 197 #define ATAPI_PACKET_SIZE 12
 198
 199 /* The generic packet command opcodes for CD/DVD Logical Units,
 200  * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
 201 #define GPCMD_BLANK                         0xa1
 202 #define GPCMD_CLOSE_TRACK                   0x5b
 203 #define GPCMD_FLUSH_CACHE                   0x35
 204 #define GPCMD_FORMAT_UNIT                   0x04
 205 #define GPCMD_GET_CONFIGURATION             0x46
 206 #define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
 207 #define GPCMD_GET_PERFORMANCE               0xac
 208 #define GPCMD_INQUIRY                       0x12
 209 #define GPCMD_LOAD_UNLOAD                   0xa6
 210 #define GPCMD_MECHANISM_STATUS              0xbd
 211 #define GPCMD_MODE_SELECT_10                0x55
 212 #define GPCMD_MODE_SENSE_10                 0x5a
 213 #define GPCMD_PAUSE_RESUME                  0x4b
 214 #define GPCMD_PLAY_AUDIO_10                 0x45
 215 #define GPCMD_PLAY_AUDIO_MSF                0x47
 216 #define GPCMD_PLAY_AUDIO_TI                 0x48
 217 #define GPCMD_PLAY_CD                       0xbc
 218 #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
 219 #define GPCMD_READ_10                       0x28
 220 #define GPCMD_READ_12                       0xa8
 221 #define GPCMD_READ_CDVD_CAPACITY            0x25
 222 #define GPCMD_READ_CD                       0xbe
 223 #define GPCMD_READ_CD_MSF                   0xb9
 224 #define GPCMD_READ_DISC_INFO                0x51
 225 #define GPCMD_READ_DVD_STRUCTURE            0xad
 226 #define GPCMD_READ_FORMAT_CAPACITIES        0x23
 227 #define GPCMD_READ_HEADER                   0x44
 228 #define GPCMD_READ_TRACK_RZONE_INFO         0x52
 229 #define GPCMD_READ_SUBCHANNEL               0x42
 230 #define GPCMD_READ_TOC_PMA_ATIP             0x43
 231 #define GPCMD_REPAIR_RZONE_TRACK            0x58
 232 #define GPCMD_REPORT_KEY                    0xa4
 233 #define GPCMD_REQUEST_SENSE                 0x03
 234 #define GPCMD_RESERVE_RZONE_TRACK           0x53
 235 #define GPCMD_SCAN                          0xba
 236 #define GPCMD_SEEK                          0x2b
 237 #define GPCMD_SEND_DVD_STRUCTURE            0xad
 238 #define GPCMD_SEND_EVENT                    0xa2
 239 #define GPCMD_SEND_KEY                      0xa3
 240 #define GPCMD_SEND_OPC                      0x54
 241 #define GPCMD_SET_READ_AHEAD                0xa7
 242 #define GPCMD_SET_STREAMING                 0xb6
 243 #define GPCMD_START_STOP_UNIT               0x1b
 244 #define GPCMD_STOP_PLAY_SCAN                0x4e
 245 #define GPCMD_TEST_UNIT_READY               0x00
 246 #define GPCMD_VERIFY_10                     0x2f
 247 #define GPCMD_WRITE_10                      0x2a
 248 #define GPCMD_WRITE_AND_VERIFY_10           0x2e
 249 /* This is listed as optional in ATAPI 2.6, but is (curiously)
 250  * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
 251  * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
 252  * drives support it. */
 253 #define GPCMD_SET_SPEED                     0xbb
 254 /* This seems to be a SCSI specific CD-ROM opcode
 255  * to play data at track/index */
 256 #define GPCMD_PLAYAUDIO_TI                  0x48
 257 /*
 258  * From MS Media Status Notification Support Specification. For
 259  * older drives only.
 260  */
 261 #define GPCMD_GET_MEDIA_STATUS              0xda
 262 #define GPCMD_MODE_SENSE_6                  0x1a
 263
 264 /* Mode page codes for mode sense/set */
 265 #define GPMODE_R_W_ERROR_PAGE           0x01
 266 #define GPMODE_WRITE_PARMS_PAGE         0x05
 267 #define GPMODE_AUDIO_CTL_PAGE           0x0e
 268 #define GPMODE_POWER_PAGE               0x1a
 269 #define GPMODE_FAULT_FAIL_PAGE          0x1c
 270 #define GPMODE_TO_PROTECT_PAGE          0x1d
 271 #define GPMODE_CAPABILITIES_PAGE        0x2a
 272 #define GPMODE_ALL_PAGES                0x3f
 273 /* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
 274  * of MODE_SENSE_POWER_PAGE */
 275 #define GPMODE_CDROM_PAGE               0x0d
 276
 277 /*
 278  * Based on values from <linux/cdrom.h> but extending CD_MINS
 279  * to the maximum common size allowed by the Orange's Book ATIP
 280  *
 281  * 90 and 99 min CDs are also available but using them as the
 282  * upper limit reduces the effectiveness of the heuristic to
 283  * detect DVDs burned to less than 25% of their maximum capacity
 284  */
 285
 286 /* Some generally useful CD-ROM information */
 287 #define CD_MINS                       80 /* max. minutes per CD */
 288 #define CD_SECS                       60 /* seconds per minute */
 289 #define CD_FRAMES                     75 /* frames per second */
 290 #define CD_FRAMESIZE                2048 /* bytes per frame, "cooked" mode */
 291 #define CD_MAX_BYTES       (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
 292 #define CD_MAX_SECTORS     (CD_MAX_BYTES / 512)
 293
 294 /*
 295  * The MMC values are not IDE specific and might need to be moved
 296  * to a common header if they are also needed for the SCSI emulation
 297  */
 298
 299 /* Profile list from MMC-6 revision 1 table 91 */
 300 #define MMC_PROFILE_NONE                0x0000
 301 #define MMC_PROFILE_CD_ROM              0x0008
 302 #define MMC_PROFILE_CD_R                0x0009
 303 #define MMC_PROFILE_CD_RW               0x000A
 304 #define MMC_PROFILE_DVD_ROM             0x0010
 305 #define MMC_PROFILE_DVD_R_SR            0x0011
 306 #define MMC_PROFILE_DVD_RAM             0x0012
 307 #define MMC_PROFILE_DVD_RW_RO           0x0013
 308 #define MMC_PROFILE_DVD_RW_SR           0x0014
 309 #define MMC_PROFILE_DVD_R_DL_SR         0x0015
 310 #define MMC_PROFILE_DVD_R_DL_JR         0x0016
 311 #define MMC_PROFILE_DVD_RW_DL           0x0017
 312 #define MMC_PROFILE_DVD_DDR             0x0018
 313 #define MMC_PROFILE_DVD_PLUS_RW         0x001A
 314 #define MMC_PROFILE_DVD_PLUS_R          0x001B
 315 #define MMC_PROFILE_DVD_PLUS_RW_DL      0x002A
 316 #define MMC_PROFILE_DVD_PLUS_R_DL       0x002B
 317 #define MMC_PROFILE_BD_ROM              0x0040
 318 #define MMC_PROFILE_BD_R_SRM            0x0041
 319 #define MMC_PROFILE_BD_R_RRM            0x0042
 320 #define MMC_PROFILE_BD_RE               0x0043
 321 #define MMC_PROFILE_HDDVD_ROM           0x0050
 322 #define MMC_PROFILE_HDDVD_R             0x0051
 323 #define MMC_PROFILE_HDDVD_RAM           0x0052
 324 #define MMC_PROFILE_HDDVD_RW            0x0053
 325 #define MMC_PROFILE_HDDVD_R_DL          0x0058
 326 #define MMC_PROFILE_HDDVD_RW_DL         0x005A
 327 #define MMC_PROFILE_INVALID             0xFFFF
 328
 329 #define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
 330 #define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
 331 #define ATAPI_INT_REASON_REL            0x04
 332 #define ATAPI_INT_REASON_TAG            0xf8
 333
 334 /* same constants as bochs */
 335 #define ASC_ILLEGAL_OPCODE                   0x20
 336 #define ASC_LOGICAL_BLOCK_OOR                0x21
 337 #define ASC_INV_FIELD_IN_CMD_PACKET          0x24
 338 #define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
 339 #define ASC_INCOMPATIBLE_FORMAT              0x30
 340 #define ASC_MEDIUM_NOT_PRESENT               0x3a
 341 #define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
 342 #define ASC_MEDIA_REMOVAL_PREVENTED          0x53
 343
 344 #define CFA_NO_ERROR            0x00
 345 #define CFA_MISC_ERROR          0x09
 346 #define CFA_INVALID_COMMAND     0x20
 347 #define CFA_INVALID_ADDRESS     0x21
 348 #define CFA_ADDRESS_OVERFLOW    0x2f
 349
 350 #define SENSE_NONE            0
 351 #define SENSE_NOT_READY       2
 352 #define SENSE_ILLEGAL_REQUEST 5
 353 #define SENSE_UNIT_ATTENTION  6
 354
 355 #define SMART_READ_DATA       0xd0
 356 #define SMART_READ_THRESH     0xd1
 357 #define SMART_ATTR_AUTOSAVE   0xd2
 358 #define SMART_SAVE_ATTR       0xd3
 359 #define SMART_EXECUTE_OFFLINE 0xd4
 360 #define SMART_READ_LOG        0xd5
 361 #define SMART_WRITE_LOG       0xd6
 362 #define SMART_ENABLE          0xd8
 363 #define SMART_DISABLE         0xd9
 364 #define SMART_STATUS          0xda
 365
 366 typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
 367
 368 typedef void EndTransferFunc(IDEState *);
 369
 370 /* NOTE: IDEState represents in fact one drive */
 371 struct IDEState {
 372     IDEBus *bus;
 373     uint8_t unit;
 374     /* ide config */
 375     IDEDriveKind drive_kind;
 376     int cylinders, heads, sectors;
 377     int64_t nb_sectors;
 378     int mult_sectors;
 379     int identify_set;
 380     uint8_t identify_data[512];
 381     int drive_serial;
 382     char drive_serial_str[21];
 383     /* ide regs */
 384     uint8_t feature;
 385     uint8_t error;
 386     uint32_t nsector;
 387     uint8_t sector;
 388     uint8_t lcyl;
 389     uint8_t hcyl;
 390     /* other part of tf for lba48 support */
 391     uint8_t hob_feature;
 392     uint8_t hob_nsector;
 393     uint8_t hob_sector;
 394     uint8_t hob_lcyl;
 395     uint8_t hob_hcyl;
 396
 397     uint8_t select;
 398     uint8_t status;
 399
 400     /* set for lba48 access */
 401     uint8_t lba48;
 402     BlockDriverState *bs;
 403     char version[9];
 404     /* ATAPI specific */
 405     uint8_t sense_key;
 406     uint8_t asc;
 407     uint8_t cdrom_changed;
 408     int packet_transfer_size;
 409     int elementary_transfer_size;
 410     int io_buffer_index;
 411     int lba;
 412     int cd_sector_size;
 413     int atapi_dma; /* true if dma is requested for the packet cmd */
 414     /* ATA DMA state */
 415     int io_buffer_size;
 416     QEMUSGList sg;
 417     /* PIO transfer handling */
 418     int req_nb_sectors; /* number of sectors per interrupt */
 419     EndTransferFunc *end_transfer_func;
 420     uint8_t *data_ptr;
 421     uint8_t *data_end;
 422     uint8_t *io_buffer;
 423     /* PIO save/restore */
 424     int32_t io_buffer_total_len;
 425     int cur_io_buffer_offset;
 426     int cur_io_buffer_len;
 427     uint8_t end_transfer_fn_idx;
 428     QEMUTimer *sector_write_timer; /* only used for win2k install hack */
 429     uint32_t irq_count; /* counts IRQs when using win2k install hack */
 430     /* CF-ATA extended error */
 431     uint8_t ext_error;
 432     /* CF-ATA metadata storage */
 433     uint32_t mdata_size;
 434     uint8_t *mdata_storage;
 435     int media_changed;
 436     /* for pmac */
 437     int is_read;
 438     /* SMART */
 439     uint8_t smart_enabled;
 440     uint8_t smart_autosave;
 441     int smart_errors;
 442     uint8_t smart_selftest_count;
 443     uint8_t *smart_selftest_data;
 444 };
 445
 446 struct IDEBus {
 447     BusState qbus;
 448     IDEDevice *master;
 449     IDEDevice *slave;
 450     BMDMAState *bmdma;
 451     IDEState ifs[2];
 452     int bus_id;
 453     uint8_t unit;
 454     uint8_t cmd;
 455     qemu_irq irq;
 456 };
 457
 458 struct IDEDevice {
 459     DeviceState qdev;
 460     uint32_t unit;
 461     BlockConf conf;
 462     char *version;
 463     char *serial;
 464 };
 465
 466 typedef int (*ide_qdev_initfn)(IDEDevice *dev);
 467 struct IDEDeviceInfo {
 468     DeviceInfo qdev;
 469     ide_qdev_initfn init;
 470 };
 471
 472 #define BM_STATUS_DMAING 0x01
 473 #define BM_STATUS_ERROR  0x02
 474 #define BM_STATUS_INT    0x04
 475 #define BM_STATUS_DMA_RETRY  0x08
 476 #define BM_STATUS_PIO_RETRY  0x10
 477 #define BM_STATUS_RETRY_READ  0x20
 478 #define BM_STATUS_RETRY_FLUSH 0x40
 479
 480 #define BM_CMD_START     0x01
 481 #define BM_CMD_READ      0x08
 482
 483 struct BMDMAState {
 484     uint8_t cmd;
 485     uint8_t status;
 486     uint32_t addr;
 487
 488     IDEBus *bus;
 489     /* current transfer state */
 490     uint32_t cur_addr;
 491     uint32_t cur_prd_last;
 492     uint32_t cur_prd_addr;
 493     uint32_t cur_prd_len;
 494     uint8_t unit;
 495     BlockDriverCompletionFunc *dma_cb;
 496     BlockDriverAIOCB *aiocb;
 497     struct iovec iov;
 498     QEMUIOVector qiov;
 499     int64_t sector_num;
 500     uint32_t nsector;
 501     IORange addr_ioport;
 502     QEMUBH *bh;
 503 };
 504
 505 static inline IDEState *idebus_active_if(IDEBus *bus)
 506 {
 507     return bus->ifs + bus->unit;
 508 }
 509
 510 static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
 511 {
 512     assert(bmdma->unit != (uint8_t)-1);
 513     return bmdma->bus->ifs + bmdma->unit;
 514 }
 515
 516 static inline void ide_set_irq(IDEBus *bus)
 517 {
 518     BMDMAState *bm = bus->bmdma;
 519     if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
 520         if (bm) {
 521             bm->status |= BM_STATUS_INT;
 522         }
 523         qemu_irq_raise(bus->irq);
 524     }
 525 }
 526
 527 /* hw/ide/core.c */
 528 extern const VMStateDescription vmstate_ide_bus;
 529
 530 #define VMSTATE_IDE_BUS(_field, _state)                          \
 531     VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
 532
 533 #define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
 534     VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
 535
 536 extern const VMStateDescription vmstate_ide_drive;
 537
 538 #define VMSTATE_IDE_DRIVES(_field, _state) \
 539     VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
 540
 541 void ide_bus_reset(IDEBus *bus);
 542 int64_t ide_get_sector(IDEState *s);
 543 void ide_set_sector(IDEState *s, int64_t sector_num);
 544
 545 void ide_dma_cancel(BMDMAState *bm);
 546 void ide_dma_restart_cb(void *opaque, int running, int reason);
 547 void ide_dma_error(IDEState *s);
 548 void ide_dma_reset(BMDMAState *bm);
 549
 550 void ide_atapi_cmd_ok(IDEState *s);
 551 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
 552 void ide_atapi_io_error(IDEState *s, int ret);
 553
 554 void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
 555 uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
 556 uint32_t ide_status_read(void *opaque, uint32_t addr);
 557 void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
 558 void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
 559 uint32_t ide_data_readw(void *opaque, uint32_t addr);
 560 void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 561 uint32_t ide_data_readl(void *opaque, uint32_t addr);
 562
 563 int ide_init_drive(IDEState *s, BlockDriverState *bs,
 564                    const char *version, const char *serial);
 565 void ide_init2(IDEBus *bus, qemu_irq irq);
 566 void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
 567                                     DriveInfo *hd1, qemu_irq irq);
 568 void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
 569
 570 /* hw/ide/qdev.c */
 571 void ide_bus_new(IDEBus *idebus, DeviceState *dev, int bus_id);
 572 IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
 573
 574 #endif /* HW_IDE_INTERNAL_H */