]> git.proxmox.com Git - mirror_qemu.git/blob - hw/milkymist-sysctl.c
Merge branch 'usb.64' of git://git.kraxel.org/qemu
[mirror_qemu.git] / hw / milkymist-sysctl.c
1 /*
2 * QEMU model of the Milkymist System Controller.
3 *
4 * Copyright (c) 2010-2012 Michael Walle <michael@walle.cc>
5 *
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2 of the License, or (at your option) any later version.
10 *
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
15 *
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
18 *
19 *
20 * Specification available at:
21 * http://www.milkymist.org/socdoc/sysctl.pdf
22 */
23
24 #include "hw.h"
25 #include "sysbus.h"
26 #include "sysemu.h"
27 #include "trace.h"
28 #include "qemu-timer.h"
29 #include "ptimer.h"
30 #include "qemu-error.h"
31
32 enum {
33 CTRL_ENABLE = (1<<0),
34 CTRL_AUTORESTART = (1<<1),
35 };
36
37 enum {
38 ICAP_READY = (1<<0),
39 };
40
41 enum {
42 R_GPIO_IN = 0,
43 R_GPIO_OUT,
44 R_GPIO_INTEN,
45 R_TIMER0_CONTROL = 4,
46 R_TIMER0_COMPARE,
47 R_TIMER0_COUNTER,
48 R_TIMER1_CONTROL = 8,
49 R_TIMER1_COMPARE,
50 R_TIMER1_COUNTER,
51 R_ICAP = 16,
52 R_DBG_SCRATCHPAD = 20,
53 R_DBG_WRITE_LOCK,
54 R_CLK_FREQUENCY = 29,
55 R_CAPABILITIES,
56 R_SYSTEM_ID,
57 R_MAX
58 };
59
60 struct MilkymistSysctlState {
61 SysBusDevice busdev;
62 MemoryRegion regs_region;
63
64 QEMUBH *bh0;
65 QEMUBH *bh1;
66 ptimer_state *ptimer0;
67 ptimer_state *ptimer1;
68
69 uint32_t freq_hz;
70 uint32_t capabilities;
71 uint32_t systemid;
72 uint32_t strappings;
73
74 uint32_t regs[R_MAX];
75
76 qemu_irq gpio_irq;
77 qemu_irq timer0_irq;
78 qemu_irq timer1_irq;
79 };
80 typedef struct MilkymistSysctlState MilkymistSysctlState;
81
82 static void sysctl_icap_write(MilkymistSysctlState *s, uint32_t value)
83 {
84 trace_milkymist_sysctl_icap_write(value);
85 switch (value & 0xffff) {
86 case 0x000e:
87 qemu_system_shutdown_request();
88 break;
89 }
90 }
91
92 static uint64_t sysctl_read(void *opaque, target_phys_addr_t addr,
93 unsigned size)
94 {
95 MilkymistSysctlState *s = opaque;
96 uint32_t r = 0;
97
98 addr >>= 2;
99 switch (addr) {
100 case R_TIMER0_COUNTER:
101 r = (uint32_t)ptimer_get_count(s->ptimer0);
102 /* milkymist timer counts up */
103 r = s->regs[R_TIMER0_COMPARE] - r;
104 break;
105 case R_TIMER1_COUNTER:
106 r = (uint32_t)ptimer_get_count(s->ptimer1);
107 /* milkymist timer counts up */
108 r = s->regs[R_TIMER1_COMPARE] - r;
109 break;
110 case R_GPIO_IN:
111 case R_GPIO_OUT:
112 case R_GPIO_INTEN:
113 case R_TIMER0_CONTROL:
114 case R_TIMER0_COMPARE:
115 case R_TIMER1_CONTROL:
116 case R_TIMER1_COMPARE:
117 case R_ICAP:
118 case R_DBG_SCRATCHPAD:
119 case R_DBG_WRITE_LOCK:
120 case R_CLK_FREQUENCY:
121 case R_CAPABILITIES:
122 case R_SYSTEM_ID:
123 r = s->regs[addr];
124 break;
125
126 default:
127 error_report("milkymist_sysctl: read access to unknown register 0x"
128 TARGET_FMT_plx, addr << 2);
129 break;
130 }
131
132 trace_milkymist_sysctl_memory_read(addr << 2, r);
133
134 return r;
135 }
136
137 static void sysctl_write(void *opaque, target_phys_addr_t addr, uint64_t value,
138 unsigned size)
139 {
140 MilkymistSysctlState *s = opaque;
141
142 trace_milkymist_sysctl_memory_write(addr, value);
143
144 addr >>= 2;
145 switch (addr) {
146 case R_GPIO_OUT:
147 case R_GPIO_INTEN:
148 case R_TIMER0_COUNTER:
149 case R_TIMER1_COUNTER:
150 case R_DBG_SCRATCHPAD:
151 s->regs[addr] = value;
152 break;
153 case R_TIMER0_COMPARE:
154 ptimer_set_limit(s->ptimer0, value, 0);
155 s->regs[addr] = value;
156 break;
157 case R_TIMER1_COMPARE:
158 ptimer_set_limit(s->ptimer1, value, 0);
159 s->regs[addr] = value;
160 break;
161 case R_TIMER0_CONTROL:
162 s->regs[addr] = value;
163 if (s->regs[R_TIMER0_CONTROL] & CTRL_ENABLE) {
164 trace_milkymist_sysctl_start_timer0();
165 ptimer_set_count(s->ptimer0,
166 s->regs[R_TIMER0_COMPARE] - s->regs[R_TIMER0_COUNTER]);
167 ptimer_run(s->ptimer0, 0);
168 } else {
169 trace_milkymist_sysctl_stop_timer0();
170 ptimer_stop(s->ptimer0);
171 }
172 break;
173 case R_TIMER1_CONTROL:
174 s->regs[addr] = value;
175 if (s->regs[R_TIMER1_CONTROL] & CTRL_ENABLE) {
176 trace_milkymist_sysctl_start_timer1();
177 ptimer_set_count(s->ptimer1,
178 s->regs[R_TIMER1_COMPARE] - s->regs[R_TIMER1_COUNTER]);
179 ptimer_run(s->ptimer1, 0);
180 } else {
181 trace_milkymist_sysctl_stop_timer1();
182 ptimer_stop(s->ptimer1);
183 }
184 break;
185 case R_ICAP:
186 sysctl_icap_write(s, value);
187 break;
188 case R_DBG_WRITE_LOCK:
189 s->regs[addr] = 1;
190 break;
191 case R_SYSTEM_ID:
192 qemu_system_reset_request();
193 break;
194
195 case R_GPIO_IN:
196 case R_CLK_FREQUENCY:
197 case R_CAPABILITIES:
198 error_report("milkymist_sysctl: write to read-only register 0x"
199 TARGET_FMT_plx, addr << 2);
200 break;
201
202 default:
203 error_report("milkymist_sysctl: write access to unknown register 0x"
204 TARGET_FMT_plx, addr << 2);
205 break;
206 }
207 }
208
209 static const MemoryRegionOps sysctl_mmio_ops = {
210 .read = sysctl_read,
211 .write = sysctl_write,
212 .valid = {
213 .min_access_size = 4,
214 .max_access_size = 4,
215 },
216 .endianness = DEVICE_NATIVE_ENDIAN,
217 };
218
219 static void timer0_hit(void *opaque)
220 {
221 MilkymistSysctlState *s = opaque;
222
223 if (!(s->regs[R_TIMER0_CONTROL] & CTRL_AUTORESTART)) {
224 s->regs[R_TIMER0_CONTROL] &= ~CTRL_ENABLE;
225 trace_milkymist_sysctl_stop_timer0();
226 ptimer_stop(s->ptimer0);
227 }
228
229 trace_milkymist_sysctl_pulse_irq_timer0();
230 qemu_irq_pulse(s->timer0_irq);
231 }
232
233 static void timer1_hit(void *opaque)
234 {
235 MilkymistSysctlState *s = opaque;
236
237 if (!(s->regs[R_TIMER1_CONTROL] & CTRL_AUTORESTART)) {
238 s->regs[R_TIMER1_CONTROL] &= ~CTRL_ENABLE;
239 trace_milkymist_sysctl_stop_timer1();
240 ptimer_stop(s->ptimer1);
241 }
242
243 trace_milkymist_sysctl_pulse_irq_timer1();
244 qemu_irq_pulse(s->timer1_irq);
245 }
246
247 static void milkymist_sysctl_reset(DeviceState *d)
248 {
249 MilkymistSysctlState *s =
250 container_of(d, MilkymistSysctlState, busdev.qdev);
251 int i;
252
253 for (i = 0; i < R_MAX; i++) {
254 s->regs[i] = 0;
255 }
256
257 ptimer_stop(s->ptimer0);
258 ptimer_stop(s->ptimer1);
259
260 /* defaults */
261 s->regs[R_ICAP] = ICAP_READY;
262 s->regs[R_SYSTEM_ID] = s->systemid;
263 s->regs[R_CLK_FREQUENCY] = s->freq_hz;
264 s->regs[R_CAPABILITIES] = s->capabilities;
265 s->regs[R_GPIO_IN] = s->strappings;
266 }
267
268 static int milkymist_sysctl_init(SysBusDevice *dev)
269 {
270 MilkymistSysctlState *s = FROM_SYSBUS(typeof(*s), dev);
271
272 sysbus_init_irq(dev, &s->gpio_irq);
273 sysbus_init_irq(dev, &s->timer0_irq);
274 sysbus_init_irq(dev, &s->timer1_irq);
275
276 s->bh0 = qemu_bh_new(timer0_hit, s);
277 s->bh1 = qemu_bh_new(timer1_hit, s);
278 s->ptimer0 = ptimer_init(s->bh0);
279 s->ptimer1 = ptimer_init(s->bh1);
280 ptimer_set_freq(s->ptimer0, s->freq_hz);
281 ptimer_set_freq(s->ptimer1, s->freq_hz);
282
283 memory_region_init_io(&s->regs_region, &sysctl_mmio_ops, s,
284 "milkymist-sysctl", R_MAX * 4);
285 sysbus_init_mmio(dev, &s->regs_region);
286
287 return 0;
288 }
289
290 static const VMStateDescription vmstate_milkymist_sysctl = {
291 .name = "milkymist-sysctl",
292 .version_id = 1,
293 .minimum_version_id = 1,
294 .minimum_version_id_old = 1,
295 .fields = (VMStateField[]) {
296 VMSTATE_UINT32_ARRAY(regs, MilkymistSysctlState, R_MAX),
297 VMSTATE_PTIMER(ptimer0, MilkymistSysctlState),
298 VMSTATE_PTIMER(ptimer1, MilkymistSysctlState),
299 VMSTATE_END_OF_LIST()
300 }
301 };
302
303 static Property milkymist_sysctl_properties[] = {
304 DEFINE_PROP_UINT32("frequency", MilkymistSysctlState,
305 freq_hz, 80000000),
306 DEFINE_PROP_UINT32("capabilities", MilkymistSysctlState,
307 capabilities, 0x00000000),
308 DEFINE_PROP_UINT32("systemid", MilkymistSysctlState,
309 systemid, 0x10014d31),
310 DEFINE_PROP_UINT32("gpio_strappings", MilkymistSysctlState,
311 strappings, 0x00000001),
312 DEFINE_PROP_END_OF_LIST(),
313 };
314
315 static void milkymist_sysctl_class_init(ObjectClass *klass, void *data)
316 {
317 DeviceClass *dc = DEVICE_CLASS(klass);
318 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
319
320 k->init = milkymist_sysctl_init;
321 dc->reset = milkymist_sysctl_reset;
322 dc->vmsd = &vmstate_milkymist_sysctl;
323 dc->props = milkymist_sysctl_properties;
324 }
325
326 static TypeInfo milkymist_sysctl_info = {
327 .name = "milkymist-sysctl",
328 .parent = TYPE_SYS_BUS_DEVICE,
329 .instance_size = sizeof(MilkymistSysctlState),
330 .class_init = milkymist_sysctl_class_init,
331 };
332
333 static void milkymist_sysctl_register_types(void)
334 {
335 type_register_static(&milkymist_sysctl_info);
336 }
337
338 type_init(milkymist_sysctl_register_types)