2 * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
4 * Copyright (c) 2004-2007 Fabrice Bellard
5 * Copyright (c) 2007 Jocelyn Mayer
6 * Copyright (c) 2010 David Gibson, IBM Corporation.
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
27 #include "qemu/osdep.h"
28 #include "qapi/error.h"
29 #include "sysemu/sysemu.h"
30 #include "sysemu/numa.h"
33 #include "hw/fw-path-provider.h"
36 #include "sysemu/device_tree.h"
37 #include "sysemu/block-backend.h"
38 #include "sysemu/cpus.h"
39 #include "sysemu/kvm.h"
41 #include "migration/migration.h"
42 #include "mmu-hash64.h"
45 #include "hw/boards.h"
46 #include "hw/ppc/ppc.h"
47 #include "hw/loader.h"
49 #include "hw/ppc/fdt.h"
50 #include "hw/ppc/spapr.h"
51 #include "hw/ppc/spapr_vio.h"
52 #include "hw/pci-host/spapr.h"
53 #include "hw/ppc/xics.h"
54 #include "hw/pci/msi.h"
56 #include "hw/pci/pci.h"
57 #include "hw/scsi/scsi.h"
58 #include "hw/virtio/virtio-scsi.h"
60 #include "exec/address-spaces.h"
62 #include "qemu/config-file.h"
63 #include "qemu/error-report.h"
67 #include "hw/compat.h"
68 #include "qemu/cutils.h"
69 #include "hw/ppc/spapr_cpu_core.h"
70 #include "qmp-commands.h"
74 /* SLOF memory layout:
76 * SLOF raw image loaded at 0, copies its romfs right below the flat
77 * device-tree, then position SLOF itself 31M below that
79 * So we set FW_OVERHEAD to 40MB which should account for all of that
82 * We load our kernel at 4M, leaving space for SLOF initial image
84 #define FDT_MAX_SIZE 0x100000
85 #define RTAS_MAX_SIZE 0x10000
86 #define RTAS_MAX_ADDR 0x80000000 /* RTAS must stay below that */
87 #define FW_MAX_SIZE 0x400000
88 #define FW_FILE_NAME "slof.bin"
89 #define FW_OVERHEAD 0x2800000
90 #define KERNEL_LOAD_ADDR FW_MAX_SIZE
92 #define MIN_RMA_SLOF 128UL
94 #define PHANDLE_XICP 0x00001111
96 #define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
98 static XICSState
*try_create_xics(const char *type
, int nr_servers
,
99 int nr_irqs
, Error
**errp
)
104 dev
= qdev_create(NULL
, type
);
105 qdev_prop_set_uint32(dev
, "nr_servers", nr_servers
);
106 qdev_prop_set_uint32(dev
, "nr_irqs", nr_irqs
);
107 object_property_set_bool(OBJECT(dev
), true, "realized", &err
);
109 error_propagate(errp
, err
);
110 object_unparent(OBJECT(dev
));
113 return XICS_COMMON(dev
);
116 static XICSState
*xics_system_init(MachineState
*machine
,
117 int nr_servers
, int nr_irqs
, Error
**errp
)
119 XICSState
*xics
= NULL
;
124 if (machine_kernel_irqchip_allowed(machine
)) {
125 xics
= try_create_xics(TYPE_XICS_SPAPR_KVM
, nr_servers
, nr_irqs
,
128 if (machine_kernel_irqchip_required(machine
) && !xics
) {
129 error_reportf_err(err
,
130 "kernel_irqchip requested but unavailable: ");
137 xics
= try_create_xics(TYPE_XICS_SPAPR
, nr_servers
, nr_irqs
, errp
);
143 static int spapr_fixup_cpu_smt_dt(void *fdt
, int offset
, PowerPCCPU
*cpu
,
147 uint32_t servers_prop
[smt_threads
];
148 uint32_t gservers_prop
[smt_threads
* 2];
149 int index
= ppc_get_vcpu_dt_id(cpu
);
151 if (cpu
->cpu_version
) {
152 ret
= fdt_setprop_cell(fdt
, offset
, "cpu-version", cpu
->cpu_version
);
158 /* Build interrupt servers and gservers properties */
159 for (i
= 0; i
< smt_threads
; i
++) {
160 servers_prop
[i
] = cpu_to_be32(index
+ i
);
161 /* Hack, direct the group queues back to cpu 0 */
162 gservers_prop
[i
*2] = cpu_to_be32(index
+ i
);
163 gservers_prop
[i
*2 + 1] = 0;
165 ret
= fdt_setprop(fdt
, offset
, "ibm,ppc-interrupt-server#s",
166 servers_prop
, sizeof(servers_prop
));
170 ret
= fdt_setprop(fdt
, offset
, "ibm,ppc-interrupt-gserver#s",
171 gservers_prop
, sizeof(gservers_prop
));
176 static int spapr_fixup_cpu_numa_dt(void *fdt
, int offset
, CPUState
*cs
)
179 PowerPCCPU
*cpu
= POWERPC_CPU(cs
);
180 int index
= ppc_get_vcpu_dt_id(cpu
);
181 uint32_t associativity
[] = {cpu_to_be32(0x5),
185 cpu_to_be32(cs
->numa_node
),
188 /* Advertise NUMA via ibm,associativity */
189 if (nb_numa_nodes
> 1) {
190 ret
= fdt_setprop(fdt
, offset
, "ibm,associativity", associativity
,
191 sizeof(associativity
));
197 static int spapr_fixup_cpu_dt(void *fdt
, sPAPRMachineState
*spapr
)
199 int ret
= 0, offset
, cpus_offset
;
202 int smt
= kvmppc_smt_threads();
203 uint32_t pft_size_prop
[] = {0, cpu_to_be32(spapr
->htab_shift
)};
206 PowerPCCPU
*cpu
= POWERPC_CPU(cs
);
207 DeviceClass
*dc
= DEVICE_GET_CLASS(cs
);
208 int index
= ppc_get_vcpu_dt_id(cpu
);
210 if ((index
% smt
) != 0) {
214 snprintf(cpu_model
, 32, "%s@%x", dc
->fw_name
, index
);
216 cpus_offset
= fdt_path_offset(fdt
, "/cpus");
217 if (cpus_offset
< 0) {
218 cpus_offset
= fdt_add_subnode(fdt
, fdt_path_offset(fdt
, "/"),
220 if (cpus_offset
< 0) {
224 offset
= fdt_subnode_offset(fdt
, cpus_offset
, cpu_model
);
226 offset
= fdt_add_subnode(fdt
, cpus_offset
, cpu_model
);
232 ret
= fdt_setprop(fdt
, offset
, "ibm,pft-size",
233 pft_size_prop
, sizeof(pft_size_prop
));
238 ret
= spapr_fixup_cpu_numa_dt(fdt
, offset
, cs
);
243 ret
= spapr_fixup_cpu_smt_dt(fdt
, offset
, cpu
,
244 ppc_get_compat_smt_threads(cpu
));
252 static hwaddr
spapr_node0_size(void)
254 MachineState
*machine
= MACHINE(qdev_get_machine());
258 for (i
= 0; i
< nb_numa_nodes
; ++i
) {
259 if (numa_info
[i
].node_mem
) {
260 return MIN(pow2floor(numa_info
[i
].node_mem
),
265 return machine
->ram_size
;
268 static void add_str(GString
*s
, const gchar
*s1
)
270 g_string_append_len(s
, s1
, strlen(s1
) + 1);
273 static int spapr_populate_memory_node(void *fdt
, int nodeid
, hwaddr start
,
276 uint32_t associativity
[] = {
277 cpu_to_be32(0x4), /* length */
278 cpu_to_be32(0x0), cpu_to_be32(0x0),
279 cpu_to_be32(0x0), cpu_to_be32(nodeid
)
282 uint64_t mem_reg_property
[2];
285 mem_reg_property
[0] = cpu_to_be64(start
);
286 mem_reg_property
[1] = cpu_to_be64(size
);
288 sprintf(mem_name
, "memory@" TARGET_FMT_lx
, start
);
289 off
= fdt_add_subnode(fdt
, 0, mem_name
);
291 _FDT((fdt_setprop_string(fdt
, off
, "device_type", "memory")));
292 _FDT((fdt_setprop(fdt
, off
, "reg", mem_reg_property
,
293 sizeof(mem_reg_property
))));
294 _FDT((fdt_setprop(fdt
, off
, "ibm,associativity", associativity
,
295 sizeof(associativity
))));
299 static int spapr_populate_memory(sPAPRMachineState
*spapr
, void *fdt
)
301 MachineState
*machine
= MACHINE(spapr
);
302 hwaddr mem_start
, node_size
;
303 int i
, nb_nodes
= nb_numa_nodes
;
304 NodeInfo
*nodes
= numa_info
;
307 /* No NUMA nodes, assume there is just one node with whole RAM */
308 if (!nb_numa_nodes
) {
310 ramnode
.node_mem
= machine
->ram_size
;
314 for (i
= 0, mem_start
= 0; i
< nb_nodes
; ++i
) {
315 if (!nodes
[i
].node_mem
) {
318 if (mem_start
>= machine
->ram_size
) {
321 node_size
= nodes
[i
].node_mem
;
322 if (node_size
> machine
->ram_size
- mem_start
) {
323 node_size
= machine
->ram_size
- mem_start
;
327 /* ppc_spapr_init() checks for rma_size <= node0_size already */
328 spapr_populate_memory_node(fdt
, i
, 0, spapr
->rma_size
);
329 mem_start
+= spapr
->rma_size
;
330 node_size
-= spapr
->rma_size
;
332 for ( ; node_size
; ) {
333 hwaddr sizetmp
= pow2floor(node_size
);
335 /* mem_start != 0 here */
336 if (ctzl(mem_start
) < ctzl(sizetmp
)) {
337 sizetmp
= 1ULL << ctzl(mem_start
);
340 spapr_populate_memory_node(fdt
, i
, mem_start
, sizetmp
);
341 node_size
-= sizetmp
;
342 mem_start
+= sizetmp
;
349 /* Populate the "ibm,pa-features" property */
350 static void spapr_populate_pa_features(CPUPPCState
*env
, void *fdt
, int offset
)
352 uint8_t pa_features_206
[] = { 6, 0,
353 0xf6, 0x1f, 0xc7, 0x00, 0x80, 0xc0 };
354 uint8_t pa_features_207
[] = { 24, 0,
355 0xf6, 0x1f, 0xc7, 0xc0, 0x80, 0xf0,
356 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
357 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
358 0x80, 0x00, 0x80, 0x00, 0x00, 0x00 };
359 uint8_t *pa_features
;
362 switch (env
->mmu_model
) {
363 case POWERPC_MMU_2_06
:
364 case POWERPC_MMU_2_06a
:
365 pa_features
= pa_features_206
;
366 pa_size
= sizeof(pa_features_206
);
368 case POWERPC_MMU_2_07
:
369 case POWERPC_MMU_2_07a
:
370 pa_features
= pa_features_207
;
371 pa_size
= sizeof(pa_features_207
);
377 if (env
->ci_large_pages
) {
379 * Note: we keep CI large pages off by default because a 64K capable
380 * guest provisioned with large pages might otherwise try to map a qemu
381 * framebuffer (or other kind of memory mapped PCI BAR) using 64K pages
382 * even if that qemu runs on a 4k host.
383 * We dd this bit back here if we are confident this is not an issue
385 pa_features
[3] |= 0x20;
387 if (kvmppc_has_cap_htm() && pa_size
> 24) {
388 pa_features
[24] |= 0x80; /* Transactional memory support */
391 _FDT((fdt_setprop(fdt
, offset
, "ibm,pa-features", pa_features
, pa_size
)));
394 static void spapr_populate_cpu_dt(CPUState
*cs
, void *fdt
, int offset
,
395 sPAPRMachineState
*spapr
)
397 PowerPCCPU
*cpu
= POWERPC_CPU(cs
);
398 CPUPPCState
*env
= &cpu
->env
;
399 PowerPCCPUClass
*pcc
= POWERPC_CPU_GET_CLASS(cs
);
400 int index
= ppc_get_vcpu_dt_id(cpu
);
401 uint32_t segs
[] = {cpu_to_be32(28), cpu_to_be32(40),
402 0xffffffff, 0xffffffff};
403 uint32_t tbfreq
= kvm_enabled() ? kvmppc_get_tbfreq()
404 : SPAPR_TIMEBASE_FREQ
;
405 uint32_t cpufreq
= kvm_enabled() ? kvmppc_get_clockfreq() : 1000000000;
406 uint32_t page_sizes_prop
[64];
407 size_t page_sizes_prop_size
;
408 uint32_t vcpus_per_socket
= smp_threads
* smp_cores
;
409 uint32_t pft_size_prop
[] = {0, cpu_to_be32(spapr
->htab_shift
)};
410 sPAPRDRConnector
*drc
;
411 sPAPRDRConnectorClass
*drck
;
414 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_CPU
, index
);
416 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
417 drc_index
= drck
->get_index(drc
);
418 _FDT((fdt_setprop_cell(fdt
, offset
, "ibm,my-drc-index", drc_index
)));
421 _FDT((fdt_setprop_cell(fdt
, offset
, "reg", index
)));
422 _FDT((fdt_setprop_string(fdt
, offset
, "device_type", "cpu")));
424 _FDT((fdt_setprop_cell(fdt
, offset
, "cpu-version", env
->spr
[SPR_PVR
])));
425 _FDT((fdt_setprop_cell(fdt
, offset
, "d-cache-block-size",
426 env
->dcache_line_size
)));
427 _FDT((fdt_setprop_cell(fdt
, offset
, "d-cache-line-size",
428 env
->dcache_line_size
)));
429 _FDT((fdt_setprop_cell(fdt
, offset
, "i-cache-block-size",
430 env
->icache_line_size
)));
431 _FDT((fdt_setprop_cell(fdt
, offset
, "i-cache-line-size",
432 env
->icache_line_size
)));
434 if (pcc
->l1_dcache_size
) {
435 _FDT((fdt_setprop_cell(fdt
, offset
, "d-cache-size",
436 pcc
->l1_dcache_size
)));
438 error_report("Warning: Unknown L1 dcache size for cpu");
440 if (pcc
->l1_icache_size
) {
441 _FDT((fdt_setprop_cell(fdt
, offset
, "i-cache-size",
442 pcc
->l1_icache_size
)));
444 error_report("Warning: Unknown L1 icache size for cpu");
447 _FDT((fdt_setprop_cell(fdt
, offset
, "timebase-frequency", tbfreq
)));
448 _FDT((fdt_setprop_cell(fdt
, offset
, "clock-frequency", cpufreq
)));
449 _FDT((fdt_setprop_cell(fdt
, offset
, "slb-size", env
->slb_nr
)));
450 _FDT((fdt_setprop_cell(fdt
, offset
, "ibm,slb-size", env
->slb_nr
)));
451 _FDT((fdt_setprop_string(fdt
, offset
, "status", "okay")));
452 _FDT((fdt_setprop(fdt
, offset
, "64-bit", NULL
, 0)));
454 if (env
->spr_cb
[SPR_PURR
].oea_read
) {
455 _FDT((fdt_setprop(fdt
, offset
, "ibm,purr", NULL
, 0)));
458 if (env
->mmu_model
& POWERPC_MMU_1TSEG
) {
459 _FDT((fdt_setprop(fdt
, offset
, "ibm,processor-segment-sizes",
460 segs
, sizeof(segs
))));
463 /* Advertise VMX/VSX (vector extensions) if available
464 * 0 / no property == no vector extensions
465 * 1 == VMX / Altivec available
466 * 2 == VSX available */
467 if (env
->insns_flags
& PPC_ALTIVEC
) {
468 uint32_t vmx
= (env
->insns_flags2
& PPC2_VSX
) ? 2 : 1;
470 _FDT((fdt_setprop_cell(fdt
, offset
, "ibm,vmx", vmx
)));
473 /* Advertise DFP (Decimal Floating Point) if available
474 * 0 / no property == no DFP
475 * 1 == DFP available */
476 if (env
->insns_flags2
& PPC2_DFP
) {
477 _FDT((fdt_setprop_cell(fdt
, offset
, "ibm,dfp", 1)));
480 page_sizes_prop_size
= ppc_create_page_sizes_prop(env
, page_sizes_prop
,
481 sizeof(page_sizes_prop
));
482 if (page_sizes_prop_size
) {
483 _FDT((fdt_setprop(fdt
, offset
, "ibm,segment-page-sizes",
484 page_sizes_prop
, page_sizes_prop_size
)));
487 spapr_populate_pa_features(env
, fdt
, offset
);
489 _FDT((fdt_setprop_cell(fdt
, offset
, "ibm,chip-id",
490 cs
->cpu_index
/ vcpus_per_socket
)));
492 _FDT((fdt_setprop(fdt
, offset
, "ibm,pft-size",
493 pft_size_prop
, sizeof(pft_size_prop
))));
495 _FDT(spapr_fixup_cpu_numa_dt(fdt
, offset
, cs
));
497 _FDT(spapr_fixup_cpu_smt_dt(fdt
, offset
, cpu
,
498 ppc_get_compat_smt_threads(cpu
)));
501 static void spapr_populate_cpus_dt_node(void *fdt
, sPAPRMachineState
*spapr
)
506 int smt
= kvmppc_smt_threads();
508 cpus_offset
= fdt_add_subnode(fdt
, 0, "cpus");
510 _FDT((fdt_setprop_cell(fdt
, cpus_offset
, "#address-cells", 0x1)));
511 _FDT((fdt_setprop_cell(fdt
, cpus_offset
, "#size-cells", 0x0)));
514 * We walk the CPUs in reverse order to ensure that CPU DT nodes
515 * created by fdt_add_subnode() end up in the right order in FDT
516 * for the guest kernel the enumerate the CPUs correctly.
518 CPU_FOREACH_REVERSE(cs
) {
519 PowerPCCPU
*cpu
= POWERPC_CPU(cs
);
520 int index
= ppc_get_vcpu_dt_id(cpu
);
521 DeviceClass
*dc
= DEVICE_GET_CLASS(cs
);
524 if ((index
% smt
) != 0) {
528 nodename
= g_strdup_printf("%s@%x", dc
->fw_name
, index
);
529 offset
= fdt_add_subnode(fdt
, cpus_offset
, nodename
);
532 spapr_populate_cpu_dt(cs
, fdt
, offset
, spapr
);
538 * Adds ibm,dynamic-reconfiguration-memory node.
539 * Refer to docs/specs/ppc-spapr-hotplug.txt for the documentation
540 * of this device tree node.
542 static int spapr_populate_drconf_memory(sPAPRMachineState
*spapr
, void *fdt
)
544 MachineState
*machine
= MACHINE(spapr
);
546 uint64_t lmb_size
= SPAPR_MEMORY_BLOCK_SIZE
;
547 uint32_t prop_lmb_size
[] = {0, cpu_to_be32(lmb_size
)};
548 uint32_t hotplug_lmb_start
= spapr
->hotplug_memory
.base
/ lmb_size
;
549 uint32_t nr_lmbs
= (spapr
->hotplug_memory
.base
+
550 memory_region_size(&spapr
->hotplug_memory
.mr
)) /
552 uint32_t *int_buf
, *cur_index
, buf_len
;
553 int nr_nodes
= nb_numa_nodes
? nb_numa_nodes
: 1;
556 * Don't create the node if there is no hotpluggable memory
558 if (machine
->ram_size
== machine
->maxram_size
) {
563 * Allocate enough buffer size to fit in ibm,dynamic-memory
564 * or ibm,associativity-lookup-arrays
566 buf_len
= MAX(nr_lmbs
* SPAPR_DR_LMB_LIST_ENTRY_SIZE
+ 1, nr_nodes
* 4 + 2)
568 cur_index
= int_buf
= g_malloc0(buf_len
);
570 offset
= fdt_add_subnode(fdt
, 0, "ibm,dynamic-reconfiguration-memory");
572 ret
= fdt_setprop(fdt
, offset
, "ibm,lmb-size", prop_lmb_size
,
573 sizeof(prop_lmb_size
));
578 ret
= fdt_setprop_cell(fdt
, offset
, "ibm,memory-flags-mask", 0xff);
583 ret
= fdt_setprop_cell(fdt
, offset
, "ibm,memory-preservation-time", 0x0);
588 /* ibm,dynamic-memory */
589 int_buf
[0] = cpu_to_be32(nr_lmbs
);
591 for (i
= 0; i
< nr_lmbs
; i
++) {
592 uint64_t addr
= i
* lmb_size
;
593 uint32_t *dynamic_memory
= cur_index
;
595 if (i
>= hotplug_lmb_start
) {
596 sPAPRDRConnector
*drc
;
597 sPAPRDRConnectorClass
*drck
;
599 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB
, i
);
601 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
603 dynamic_memory
[0] = cpu_to_be32(addr
>> 32);
604 dynamic_memory
[1] = cpu_to_be32(addr
& 0xffffffff);
605 dynamic_memory
[2] = cpu_to_be32(drck
->get_index(drc
));
606 dynamic_memory
[3] = cpu_to_be32(0); /* reserved */
607 dynamic_memory
[4] = cpu_to_be32(numa_get_node(addr
, NULL
));
608 if (memory_region_present(get_system_memory(), addr
)) {
609 dynamic_memory
[5] = cpu_to_be32(SPAPR_LMB_FLAGS_ASSIGNED
);
611 dynamic_memory
[5] = cpu_to_be32(0);
615 * LMB information for RMA, boot time RAM and gap b/n RAM and
616 * hotplug memory region -- all these are marked as reserved
617 * and as having no valid DRC.
619 dynamic_memory
[0] = cpu_to_be32(addr
>> 32);
620 dynamic_memory
[1] = cpu_to_be32(addr
& 0xffffffff);
621 dynamic_memory
[2] = cpu_to_be32(0);
622 dynamic_memory
[3] = cpu_to_be32(0); /* reserved */
623 dynamic_memory
[4] = cpu_to_be32(-1);
624 dynamic_memory
[5] = cpu_to_be32(SPAPR_LMB_FLAGS_RESERVED
|
625 SPAPR_LMB_FLAGS_DRC_INVALID
);
628 cur_index
+= SPAPR_DR_LMB_LIST_ENTRY_SIZE
;
630 ret
= fdt_setprop(fdt
, offset
, "ibm,dynamic-memory", int_buf
, buf_len
);
635 /* ibm,associativity-lookup-arrays */
637 int_buf
[0] = cpu_to_be32(nr_nodes
);
638 int_buf
[1] = cpu_to_be32(4); /* Number of entries per associativity list */
640 for (i
= 0; i
< nr_nodes
; i
++) {
641 uint32_t associativity
[] = {
647 memcpy(cur_index
, associativity
, sizeof(associativity
));
650 ret
= fdt_setprop(fdt
, offset
, "ibm,associativity-lookup-arrays", int_buf
,
651 (cur_index
- int_buf
) * sizeof(uint32_t));
657 static int spapr_dt_cas_updates(sPAPRMachineState
*spapr
, void *fdt
,
658 sPAPROptionVector
*ov5_updates
)
660 sPAPRMachineClass
*smc
= SPAPR_MACHINE_GET_CLASS(spapr
);
663 /* Generate ibm,dynamic-reconfiguration-memory node if required */
664 if (spapr_ovec_test(ov5_updates
, OV5_DRCONF_MEMORY
)) {
665 g_assert(smc
->dr_lmb_enabled
);
666 ret
= spapr_populate_drconf_memory(spapr
, fdt
);
672 offset
= fdt_path_offset(fdt
, "/chosen");
674 offset
= fdt_add_subnode(fdt
, 0, "chosen");
679 ret
= spapr_ovec_populate_dt(fdt
, offset
, spapr
->ov5_cas
,
680 "ibm,architecture-vec-5");
686 int spapr_h_cas_compose_response(sPAPRMachineState
*spapr
,
687 target_ulong addr
, target_ulong size
,
689 sPAPROptionVector
*ov5_updates
)
691 void *fdt
, *fdt_skel
;
692 sPAPRDeviceTreeUpdateHeader hdr
= { .version_id
= 1 };
696 /* Create sceleton */
697 fdt_skel
= g_malloc0(size
);
698 _FDT((fdt_create(fdt_skel
, size
)));
699 _FDT((fdt_begin_node(fdt_skel
, "")));
700 _FDT((fdt_end_node(fdt_skel
)));
701 _FDT((fdt_finish(fdt_skel
)));
702 fdt
= g_malloc0(size
);
703 _FDT((fdt_open_into(fdt_skel
, fdt
, size
)));
706 /* Fixup cpu nodes */
708 _FDT((spapr_fixup_cpu_dt(fdt
, spapr
)));
711 if (spapr_dt_cas_updates(spapr
, fdt
, ov5_updates
)) {
715 /* Pack resulting tree */
716 _FDT((fdt_pack(fdt
)));
718 if (fdt_totalsize(fdt
) + sizeof(hdr
) > size
) {
719 trace_spapr_cas_failed(size
);
723 cpu_physical_memory_write(addr
, &hdr
, sizeof(hdr
));
724 cpu_physical_memory_write(addr
+ sizeof(hdr
), fdt
, fdt_totalsize(fdt
));
725 trace_spapr_cas_continue(fdt_totalsize(fdt
) + sizeof(hdr
));
731 static void spapr_dt_rtas(sPAPRMachineState
*spapr
, void *fdt
)
734 GString
*hypertas
= g_string_sized_new(256);
735 GString
*qemu_hypertas
= g_string_sized_new(256);
736 uint32_t refpoints
[] = { cpu_to_be32(0x4), cpu_to_be32(0x4) };
737 uint64_t max_hotplug_addr
= spapr
->hotplug_memory
.base
+
738 memory_region_size(&spapr
->hotplug_memory
.mr
);
739 uint32_t lrdr_capacity
[] = {
740 cpu_to_be32(max_hotplug_addr
>> 32),
741 cpu_to_be32(max_hotplug_addr
& 0xffffffff),
742 0, cpu_to_be32(SPAPR_MEMORY_BLOCK_SIZE
),
743 cpu_to_be32(max_cpus
/ smp_threads
),
746 _FDT(rtas
= fdt_add_subnode(fdt
, 0, "rtas"));
749 add_str(hypertas
, "hcall-pft");
750 add_str(hypertas
, "hcall-term");
751 add_str(hypertas
, "hcall-dabr");
752 add_str(hypertas
, "hcall-interrupt");
753 add_str(hypertas
, "hcall-tce");
754 add_str(hypertas
, "hcall-vio");
755 add_str(hypertas
, "hcall-splpar");
756 add_str(hypertas
, "hcall-bulk");
757 add_str(hypertas
, "hcall-set-mode");
758 add_str(hypertas
, "hcall-sprg0");
759 add_str(hypertas
, "hcall-copy");
760 add_str(hypertas
, "hcall-debug");
761 add_str(qemu_hypertas
, "hcall-memop1");
763 if (!kvm_enabled() || kvmppc_spapr_use_multitce()) {
764 add_str(hypertas
, "hcall-multi-tce");
766 _FDT(fdt_setprop(fdt
, rtas
, "ibm,hypertas-functions",
767 hypertas
->str
, hypertas
->len
));
768 g_string_free(hypertas
, TRUE
);
769 _FDT(fdt_setprop(fdt
, rtas
, "qemu,hypertas-functions",
770 qemu_hypertas
->str
, qemu_hypertas
->len
));
771 g_string_free(qemu_hypertas
, TRUE
);
773 _FDT(fdt_setprop(fdt
, rtas
, "ibm,associativity-reference-points",
774 refpoints
, sizeof(refpoints
)));
776 _FDT(fdt_setprop_cell(fdt
, rtas
, "rtas-error-log-max",
777 RTAS_ERROR_LOG_MAX
));
778 _FDT(fdt_setprop_cell(fdt
, rtas
, "rtas-event-scan-rate",
779 RTAS_EVENT_SCAN_RATE
));
782 _FDT(fdt_setprop(fdt
, rtas
, "ibm,change-msix-capable", NULL
, 0));
786 * According to PAPR, rtas ibm,os-term does not guarantee a return
787 * back to the guest cpu.
789 * While an additional ibm,extended-os-term property indicates
790 * that rtas call return will always occur. Set this property.
792 _FDT(fdt_setprop(fdt
, rtas
, "ibm,extended-os-term", NULL
, 0));
794 _FDT(fdt_setprop(fdt
, rtas
, "ibm,lrdr-capacity",
795 lrdr_capacity
, sizeof(lrdr_capacity
)));
797 spapr_dt_rtas_tokens(fdt
, rtas
);
800 static void spapr_dt_chosen(sPAPRMachineState
*spapr
, void *fdt
)
802 MachineState
*machine
= MACHINE(spapr
);
804 const char *boot_device
= machine
->boot_order
;
805 char *stdout_path
= spapr_vio_stdout_path(spapr
->vio_bus
);
807 char *bootlist
= get_boot_devices_list(&cb
, true);
809 _FDT(chosen
= fdt_add_subnode(fdt
, 0, "chosen"));
811 _FDT(fdt_setprop_string(fdt
, chosen
, "bootargs", machine
->kernel_cmdline
));
812 _FDT(fdt_setprop_cell(fdt
, chosen
, "linux,initrd-start",
813 spapr
->initrd_base
));
814 _FDT(fdt_setprop_cell(fdt
, chosen
, "linux,initrd-end",
815 spapr
->initrd_base
+ spapr
->initrd_size
));
817 if (spapr
->kernel_size
) {
818 uint64_t kprop
[2] = { cpu_to_be64(KERNEL_LOAD_ADDR
),
819 cpu_to_be64(spapr
->kernel_size
) };
821 _FDT(fdt_setprop(fdt
, chosen
, "qemu,boot-kernel",
822 &kprop
, sizeof(kprop
)));
823 if (spapr
->kernel_le
) {
824 _FDT(fdt_setprop(fdt
, chosen
, "qemu,boot-kernel-le", NULL
, 0));
828 _FDT((fdt_setprop_cell(fdt
, chosen
, "qemu,boot-menu", boot_menu
)));
830 _FDT(fdt_setprop_cell(fdt
, chosen
, "qemu,graphic-width", graphic_width
));
831 _FDT(fdt_setprop_cell(fdt
, chosen
, "qemu,graphic-height", graphic_height
));
832 _FDT(fdt_setprop_cell(fdt
, chosen
, "qemu,graphic-depth", graphic_depth
));
834 if (cb
&& bootlist
) {
837 for (i
= 0; i
< cb
; i
++) {
838 if (bootlist
[i
] == '\n') {
842 _FDT(fdt_setprop_string(fdt
, chosen
, "qemu,boot-list", bootlist
));
845 if (boot_device
&& strlen(boot_device
)) {
846 _FDT(fdt_setprop_string(fdt
, chosen
, "qemu,boot-device", boot_device
));
849 if (!spapr
->has_graphics
&& stdout_path
) {
850 _FDT(fdt_setprop_string(fdt
, chosen
, "linux,stdout-path", stdout_path
));
857 static void spapr_dt_hypervisor(sPAPRMachineState
*spapr
, void *fdt
)
859 /* The /hypervisor node isn't in PAPR - this is a hack to allow PR
860 * KVM to work under pHyp with some guest co-operation */
862 uint8_t hypercall
[16];
864 _FDT(hypervisor
= fdt_add_subnode(fdt
, 0, "hypervisor"));
865 /* indicate KVM hypercall interface */
866 _FDT(fdt_setprop_string(fdt
, hypervisor
, "compatible", "linux,kvm"));
867 if (kvmppc_has_cap_fixup_hcalls()) {
869 * Older KVM versions with older guest kernels were broken
870 * with the magic page, don't allow the guest to map it.
872 if (!kvmppc_get_hypercall(first_cpu
->env_ptr
, hypercall
,
873 sizeof(hypercall
))) {
874 _FDT(fdt_setprop(fdt
, hypervisor
, "hcall-instructions",
875 hypercall
, sizeof(hypercall
)));
880 static void *spapr_build_fdt(sPAPRMachineState
*spapr
,
884 MachineState
*machine
= MACHINE(qdev_get_machine());
885 MachineClass
*mc
= MACHINE_GET_CLASS(machine
);
886 sPAPRMachineClass
*smc
= SPAPR_MACHINE_GET_CLASS(machine
);
892 fdt
= g_malloc0(FDT_MAX_SIZE
);
893 _FDT((fdt_create_empty_tree(fdt
, FDT_MAX_SIZE
)));
896 _FDT(fdt_setprop_string(fdt
, 0, "device_type", "chrp"));
897 _FDT(fdt_setprop_string(fdt
, 0, "model", "IBM pSeries (emulated by qemu)"));
898 _FDT(fdt_setprop_string(fdt
, 0, "compatible", "qemu,pseries"));
901 * Add info to guest to indentify which host is it being run on
902 * and what is the uuid of the guest
904 if (kvmppc_get_host_model(&buf
)) {
905 _FDT(fdt_setprop_string(fdt
, 0, "host-model", buf
));
908 if (kvmppc_get_host_serial(&buf
)) {
909 _FDT(fdt_setprop_string(fdt
, 0, "host-serial", buf
));
913 buf
= qemu_uuid_unparse_strdup(&qemu_uuid
);
915 _FDT(fdt_setprop_string(fdt
, 0, "vm,uuid", buf
));
917 _FDT(fdt_setprop_string(fdt
, 0, "system-id", buf
));
921 if (qemu_get_vm_name()) {
922 _FDT(fdt_setprop_string(fdt
, 0, "ibm,partition-name",
923 qemu_get_vm_name()));
926 _FDT(fdt_setprop_cell(fdt
, 0, "#address-cells", 2));
927 _FDT(fdt_setprop_cell(fdt
, 0, "#size-cells", 2));
929 /* /interrupt controller */
930 spapr_dt_xics(spapr
->xics
, fdt
, PHANDLE_XICP
);
932 ret
= spapr_populate_memory(spapr
, fdt
);
934 error_report("couldn't setup memory nodes in fdt");
939 spapr_dt_vdevice(spapr
->vio_bus
, fdt
);
941 if (object_resolve_path_type("", TYPE_SPAPR_RNG
, NULL
)) {
942 ret
= spapr_rng_populate_dt(fdt
);
944 error_report("could not set up rng device in the fdt");
949 QLIST_FOREACH(phb
, &spapr
->phbs
, list
) {
950 ret
= spapr_populate_pci_dt(phb
, PHANDLE_XICP
, fdt
);
952 error_report("couldn't setup PCI devices in fdt");
958 spapr_populate_cpus_dt_node(fdt
, spapr
);
960 if (smc
->dr_lmb_enabled
) {
961 _FDT(spapr_drc_populate_dt(fdt
, 0, NULL
, SPAPR_DR_CONNECTOR_TYPE_LMB
));
964 if (mc
->query_hotpluggable_cpus
) {
965 int offset
= fdt_path_offset(fdt
, "/cpus");
966 ret
= spapr_drc_populate_dt(fdt
, offset
, NULL
,
967 SPAPR_DR_CONNECTOR_TYPE_CPU
);
969 error_report("Couldn't set up CPU DR device tree properties");
975 spapr_dt_events(spapr
, fdt
);
978 spapr_dt_rtas(spapr
, fdt
);
981 spapr_dt_chosen(spapr
, fdt
);
985 spapr_dt_hypervisor(spapr
, fdt
);
988 /* Build memory reserve map */
989 if (spapr
->kernel_size
) {
990 _FDT((fdt_add_mem_rsv(fdt
, KERNEL_LOAD_ADDR
, spapr
->kernel_size
)));
992 if (spapr
->initrd_size
) {
993 _FDT((fdt_add_mem_rsv(fdt
, spapr
->initrd_base
, spapr
->initrd_size
)));
996 /* ibm,client-architecture-support updates */
997 ret
= spapr_dt_cas_updates(spapr
, fdt
, spapr
->ov5_cas
);
999 error_report("couldn't setup CAS properties fdt");
1006 static uint64_t translate_kernel_address(void *opaque
, uint64_t addr
)
1008 return (addr
& 0x0fffffff) + KERNEL_LOAD_ADDR
;
1011 static void emulate_spapr_hypercall(PowerPCCPU
*cpu
)
1013 CPUPPCState
*env
= &cpu
->env
;
1016 hcall_dprintf("Hypercall made with MSR[PR]=1\n");
1017 env
->gpr
[3] = H_PRIVILEGE
;
1019 env
->gpr
[3] = spapr_hypercall(cpu
, env
->gpr
[3], &env
->gpr
[4]);
1023 #define HPTE(_table, _i) (void *)(((uint64_t *)(_table)) + ((_i) * 2))
1024 #define HPTE_VALID(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_VALID)
1025 #define HPTE_DIRTY(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_HPTE_DIRTY)
1026 #define CLEAN_HPTE(_hpte) ((*(uint64_t *)(_hpte)) &= tswap64(~HPTE64_V_HPTE_DIRTY))
1027 #define DIRTY_HPTE(_hpte) ((*(uint64_t *)(_hpte)) |= tswap64(HPTE64_V_HPTE_DIRTY))
1030 * Get the fd to access the kernel htab, re-opening it if necessary
1032 static int get_htab_fd(sPAPRMachineState
*spapr
)
1034 if (spapr
->htab_fd
>= 0) {
1035 return spapr
->htab_fd
;
1038 spapr
->htab_fd
= kvmppc_get_htab_fd(false);
1039 if (spapr
->htab_fd
< 0) {
1040 error_report("Unable to open fd for reading hash table from KVM: %s",
1044 return spapr
->htab_fd
;
1047 static void close_htab_fd(sPAPRMachineState
*spapr
)
1049 if (spapr
->htab_fd
>= 0) {
1050 close(spapr
->htab_fd
);
1052 spapr
->htab_fd
= -1;
1055 static int spapr_hpt_shift_for_ramsize(uint64_t ramsize
)
1059 /* We aim for a hash table of size 1/128 the size of RAM (rounded
1060 * up). The PAPR recommendation is actually 1/64 of RAM size, but
1061 * that's much more than is needed for Linux guests */
1062 shift
= ctz64(pow2ceil(ramsize
)) - 7;
1063 shift
= MAX(shift
, 18); /* Minimum architected size */
1064 shift
= MIN(shift
, 46); /* Maximum architected size */
1068 static void spapr_reallocate_hpt(sPAPRMachineState
*spapr
, int shift
,
1073 /* Clean up any HPT info from a previous boot */
1074 g_free(spapr
->htab
);
1076 spapr
->htab_shift
= 0;
1077 close_htab_fd(spapr
);
1079 rc
= kvmppc_reset_htab(shift
);
1081 /* kernel-side HPT needed, but couldn't allocate one */
1082 error_setg_errno(errp
, errno
,
1083 "Failed to allocate KVM HPT of order %d (try smaller maxmem?)",
1085 /* This is almost certainly fatal, but if the caller really
1086 * wants to carry on with shift == 0, it's welcome to try */
1087 } else if (rc
> 0) {
1088 /* kernel-side HPT allocated */
1091 "Requested order %d HPT, but kernel allocated order %ld (try smaller maxmem?)",
1095 spapr
->htab_shift
= shift
;
1098 /* kernel-side HPT not needed, allocate in userspace instead */
1099 size_t size
= 1ULL << shift
;
1102 spapr
->htab
= qemu_memalign(size
, size
);
1104 error_setg_errno(errp
, errno
,
1105 "Could not allocate HPT of order %d", shift
);
1109 memset(spapr
->htab
, 0, size
);
1110 spapr
->htab_shift
= shift
;
1112 for (i
= 0; i
< size
/ HASH_PTE_SIZE_64
; i
++) {
1113 DIRTY_HPTE(HPTE(spapr
->htab
, i
));
1118 static void find_unknown_sysbus_device(SysBusDevice
*sbdev
, void *opaque
)
1120 bool matched
= false;
1122 if (object_dynamic_cast(OBJECT(sbdev
), TYPE_SPAPR_PCI_HOST_BRIDGE
)) {
1127 error_report("Device %s is not supported by this machine yet.",
1128 qdev_fw_name(DEVICE(sbdev
)));
1133 static void ppc_spapr_reset(void)
1135 MachineState
*machine
= MACHINE(qdev_get_machine());
1136 sPAPRMachineState
*spapr
= SPAPR_MACHINE(machine
);
1137 PowerPCCPU
*first_ppc_cpu
;
1138 uint32_t rtas_limit
;
1139 hwaddr rtas_addr
, fdt_addr
;
1143 /* Check for unknown sysbus devices */
1144 foreach_dynamic_sysbus_device(find_unknown_sysbus_device
, NULL
);
1146 /* Allocate and/or reset the hash page table */
1147 spapr_reallocate_hpt(spapr
,
1148 spapr_hpt_shift_for_ramsize(machine
->maxram_size
),
1151 /* Update the RMA size if necessary */
1152 if (spapr
->vrma_adjust
) {
1153 spapr
->rma_size
= kvmppc_rma_size(spapr_node0_size(),
1157 qemu_devices_reset();
1160 * We place the device tree and RTAS just below either the top of the RMA,
1161 * or just below 2GB, whichever is lowere, so that it can be
1162 * processed with 32-bit real mode code if necessary
1164 rtas_limit
= MIN(spapr
->rma_size
, RTAS_MAX_ADDR
);
1165 rtas_addr
= rtas_limit
- RTAS_MAX_SIZE
;
1166 fdt_addr
= rtas_addr
- FDT_MAX_SIZE
;
1168 /* if this reset wasn't generated by CAS, we should reset our
1169 * negotiated options and start from scratch */
1170 if (!spapr
->cas_reboot
) {
1171 spapr_ovec_cleanup(spapr
->ov5_cas
);
1172 spapr
->ov5_cas
= spapr_ovec_new();
1175 fdt
= spapr_build_fdt(spapr
, rtas_addr
, spapr
->rtas_size
);
1177 spapr_load_rtas(spapr
, fdt
, rtas_addr
);
1181 /* Should only fail if we've built a corrupted tree */
1184 if (fdt_totalsize(fdt
) > FDT_MAX_SIZE
) {
1185 error_report("FDT too big ! 0x%x bytes (max is 0x%x)",
1186 fdt_totalsize(fdt
), FDT_MAX_SIZE
);
1191 qemu_fdt_dumpdtb(fdt
, fdt_totalsize(fdt
));
1192 cpu_physical_memory_write(fdt_addr
, fdt
, fdt_totalsize(fdt
));
1195 /* Set up the entry state */
1196 first_ppc_cpu
= POWERPC_CPU(first_cpu
);
1197 first_ppc_cpu
->env
.gpr
[3] = fdt_addr
;
1198 first_ppc_cpu
->env
.gpr
[5] = 0;
1199 first_cpu
->halted
= 0;
1200 first_ppc_cpu
->env
.nip
= SPAPR_ENTRY_POINT
;
1202 spapr
->cas_reboot
= false;
1205 static void spapr_create_nvram(sPAPRMachineState
*spapr
)
1207 DeviceState
*dev
= qdev_create(&spapr
->vio_bus
->bus
, "spapr-nvram");
1208 DriveInfo
*dinfo
= drive_get(IF_PFLASH
, 0, 0);
1211 qdev_prop_set_drive(dev
, "drive", blk_by_legacy_dinfo(dinfo
),
1215 qdev_init_nofail(dev
);
1217 spapr
->nvram
= (struct sPAPRNVRAM
*)dev
;
1220 static void spapr_rtc_create(sPAPRMachineState
*spapr
)
1222 DeviceState
*dev
= qdev_create(NULL
, TYPE_SPAPR_RTC
);
1224 qdev_init_nofail(dev
);
1227 object_property_add_alias(qdev_get_machine(), "rtc-time",
1228 OBJECT(spapr
->rtc
), "date", NULL
);
1231 /* Returns whether we want to use VGA or not */
1232 static bool spapr_vga_init(PCIBus
*pci_bus
, Error
**errp
)
1234 switch (vga_interface_type
) {
1241 return pci_vga_init(pci_bus
) != NULL
;
1244 "Unsupported VGA mode, only -vga std or -vga virtio is supported");
1249 static int spapr_post_load(void *opaque
, int version_id
)
1251 sPAPRMachineState
*spapr
= (sPAPRMachineState
*)opaque
;
1254 /* In earlier versions, there was no separate qdev for the PAPR
1255 * RTC, so the RTC offset was stored directly in sPAPREnvironment.
1256 * So when migrating from those versions, poke the incoming offset
1257 * value into the RTC device */
1258 if (version_id
< 3) {
1259 err
= spapr_rtc_import_offset(spapr
->rtc
, spapr
->rtc_offset
);
1265 static bool version_before_3(void *opaque
, int version_id
)
1267 return version_id
< 3;
1270 static const VMStateDescription vmstate_spapr
= {
1273 .minimum_version_id
= 1,
1274 .post_load
= spapr_post_load
,
1275 .fields
= (VMStateField
[]) {
1276 /* used to be @next_irq */
1277 VMSTATE_UNUSED_BUFFER(version_before_3
, 0, 4),
1280 VMSTATE_UINT64_TEST(rtc_offset
, sPAPRMachineState
, version_before_3
),
1282 VMSTATE_PPC_TIMEBASE_V(tb
, sPAPRMachineState
, 2),
1283 VMSTATE_END_OF_LIST()
1287 static int htab_save_setup(QEMUFile
*f
, void *opaque
)
1289 sPAPRMachineState
*spapr
= opaque
;
1291 /* "Iteration" header */
1292 qemu_put_be32(f
, spapr
->htab_shift
);
1295 spapr
->htab_save_index
= 0;
1296 spapr
->htab_first_pass
= true;
1298 assert(kvm_enabled());
1305 static void htab_save_first_pass(QEMUFile
*f
, sPAPRMachineState
*spapr
,
1308 bool has_timeout
= max_ns
!= -1;
1309 int htabslots
= HTAB_SIZE(spapr
) / HASH_PTE_SIZE_64
;
1310 int index
= spapr
->htab_save_index
;
1311 int64_t starttime
= qemu_clock_get_ns(QEMU_CLOCK_REALTIME
);
1313 assert(spapr
->htab_first_pass
);
1318 /* Consume invalid HPTEs */
1319 while ((index
< htabslots
)
1320 && !HPTE_VALID(HPTE(spapr
->htab
, index
))) {
1322 CLEAN_HPTE(HPTE(spapr
->htab
, index
));
1325 /* Consume valid HPTEs */
1327 while ((index
< htabslots
) && (index
- chunkstart
< USHRT_MAX
)
1328 && HPTE_VALID(HPTE(spapr
->htab
, index
))) {
1330 CLEAN_HPTE(HPTE(spapr
->htab
, index
));
1333 if (index
> chunkstart
) {
1334 int n_valid
= index
- chunkstart
;
1336 qemu_put_be32(f
, chunkstart
);
1337 qemu_put_be16(f
, n_valid
);
1338 qemu_put_be16(f
, 0);
1339 qemu_put_buffer(f
, HPTE(spapr
->htab
, chunkstart
),
1340 HASH_PTE_SIZE_64
* n_valid
);
1343 (qemu_clock_get_ns(QEMU_CLOCK_REALTIME
) - starttime
) > max_ns
) {
1347 } while ((index
< htabslots
) && !qemu_file_rate_limit(f
));
1349 if (index
>= htabslots
) {
1350 assert(index
== htabslots
);
1352 spapr
->htab_first_pass
= false;
1354 spapr
->htab_save_index
= index
;
1357 static int htab_save_later_pass(QEMUFile
*f
, sPAPRMachineState
*spapr
,
1360 bool final
= max_ns
< 0;
1361 int htabslots
= HTAB_SIZE(spapr
) / HASH_PTE_SIZE_64
;
1362 int examined
= 0, sent
= 0;
1363 int index
= spapr
->htab_save_index
;
1364 int64_t starttime
= qemu_clock_get_ns(QEMU_CLOCK_REALTIME
);
1366 assert(!spapr
->htab_first_pass
);
1369 int chunkstart
, invalidstart
;
1371 /* Consume non-dirty HPTEs */
1372 while ((index
< htabslots
)
1373 && !HPTE_DIRTY(HPTE(spapr
->htab
, index
))) {
1379 /* Consume valid dirty HPTEs */
1380 while ((index
< htabslots
) && (index
- chunkstart
< USHRT_MAX
)
1381 && HPTE_DIRTY(HPTE(spapr
->htab
, index
))
1382 && HPTE_VALID(HPTE(spapr
->htab
, index
))) {
1383 CLEAN_HPTE(HPTE(spapr
->htab
, index
));
1388 invalidstart
= index
;
1389 /* Consume invalid dirty HPTEs */
1390 while ((index
< htabslots
) && (index
- invalidstart
< USHRT_MAX
)
1391 && HPTE_DIRTY(HPTE(spapr
->htab
, index
))
1392 && !HPTE_VALID(HPTE(spapr
->htab
, index
))) {
1393 CLEAN_HPTE(HPTE(spapr
->htab
, index
));
1398 if (index
> chunkstart
) {
1399 int n_valid
= invalidstart
- chunkstart
;
1400 int n_invalid
= index
- invalidstart
;
1402 qemu_put_be32(f
, chunkstart
);
1403 qemu_put_be16(f
, n_valid
);
1404 qemu_put_be16(f
, n_invalid
);
1405 qemu_put_buffer(f
, HPTE(spapr
->htab
, chunkstart
),
1406 HASH_PTE_SIZE_64
* n_valid
);
1407 sent
+= index
- chunkstart
;
1409 if (!final
&& (qemu_clock_get_ns(QEMU_CLOCK_REALTIME
) - starttime
) > max_ns
) {
1414 if (examined
>= htabslots
) {
1418 if (index
>= htabslots
) {
1419 assert(index
== htabslots
);
1422 } while ((examined
< htabslots
) && (!qemu_file_rate_limit(f
) || final
));
1424 if (index
>= htabslots
) {
1425 assert(index
== htabslots
);
1429 spapr
->htab_save_index
= index
;
1431 return (examined
>= htabslots
) && (sent
== 0) ? 1 : 0;
1434 #define MAX_ITERATION_NS 5000000 /* 5 ms */
1435 #define MAX_KVM_BUF_SIZE 2048
1437 static int htab_save_iterate(QEMUFile
*f
, void *opaque
)
1439 sPAPRMachineState
*spapr
= opaque
;
1443 /* Iteration header */
1444 qemu_put_be32(f
, 0);
1447 assert(kvm_enabled());
1449 fd
= get_htab_fd(spapr
);
1454 rc
= kvmppc_save_htab(f
, fd
, MAX_KVM_BUF_SIZE
, MAX_ITERATION_NS
);
1458 } else if (spapr
->htab_first_pass
) {
1459 htab_save_first_pass(f
, spapr
, MAX_ITERATION_NS
);
1461 rc
= htab_save_later_pass(f
, spapr
, MAX_ITERATION_NS
);
1465 qemu_put_be32(f
, 0);
1466 qemu_put_be16(f
, 0);
1467 qemu_put_be16(f
, 0);
1472 static int htab_save_complete(QEMUFile
*f
, void *opaque
)
1474 sPAPRMachineState
*spapr
= opaque
;
1477 /* Iteration header */
1478 qemu_put_be32(f
, 0);
1483 assert(kvm_enabled());
1485 fd
= get_htab_fd(spapr
);
1490 rc
= kvmppc_save_htab(f
, fd
, MAX_KVM_BUF_SIZE
, -1);
1495 if (spapr
->htab_first_pass
) {
1496 htab_save_first_pass(f
, spapr
, -1);
1498 htab_save_later_pass(f
, spapr
, -1);
1502 qemu_put_be32(f
, 0);
1503 qemu_put_be16(f
, 0);
1504 qemu_put_be16(f
, 0);
1509 static int htab_load(QEMUFile
*f
, void *opaque
, int version_id
)
1511 sPAPRMachineState
*spapr
= opaque
;
1512 uint32_t section_hdr
;
1515 if (version_id
< 1 || version_id
> 1) {
1516 error_report("htab_load() bad version");
1520 section_hdr
= qemu_get_be32(f
);
1523 Error
*local_err
= NULL
;
1525 /* First section gives the htab size */
1526 spapr_reallocate_hpt(spapr
, section_hdr
, &local_err
);
1528 error_report_err(local_err
);
1535 assert(kvm_enabled());
1537 fd
= kvmppc_get_htab_fd(true);
1539 error_report("Unable to open fd to restore KVM hash table: %s",
1546 uint16_t n_valid
, n_invalid
;
1548 index
= qemu_get_be32(f
);
1549 n_valid
= qemu_get_be16(f
);
1550 n_invalid
= qemu_get_be16(f
);
1552 if ((index
== 0) && (n_valid
== 0) && (n_invalid
== 0)) {
1557 if ((index
+ n_valid
+ n_invalid
) >
1558 (HTAB_SIZE(spapr
) / HASH_PTE_SIZE_64
)) {
1559 /* Bad index in stream */
1561 "htab_load() bad index %d (%hd+%hd entries) in htab stream (htab_shift=%d)",
1562 index
, n_valid
, n_invalid
, spapr
->htab_shift
);
1568 qemu_get_buffer(f
, HPTE(spapr
->htab
, index
),
1569 HASH_PTE_SIZE_64
* n_valid
);
1572 memset(HPTE(spapr
->htab
, index
+ n_valid
), 0,
1573 HASH_PTE_SIZE_64
* n_invalid
);
1580 rc
= kvmppc_load_htab_chunk(f
, fd
, index
, n_valid
, n_invalid
);
1595 static void htab_cleanup(void *opaque
)
1597 sPAPRMachineState
*spapr
= opaque
;
1599 close_htab_fd(spapr
);
1602 static SaveVMHandlers savevm_htab_handlers
= {
1603 .save_live_setup
= htab_save_setup
,
1604 .save_live_iterate
= htab_save_iterate
,
1605 .save_live_complete_precopy
= htab_save_complete
,
1606 .cleanup
= htab_cleanup
,
1607 .load_state
= htab_load
,
1610 static void spapr_boot_set(void *opaque
, const char *boot_device
,
1613 MachineState
*machine
= MACHINE(qdev_get_machine());
1614 machine
->boot_order
= g_strdup(boot_device
);
1618 * Reset routine for LMB DR devices.
1620 * Unlike PCI DR devices, LMB DR devices explicitly register this reset
1621 * routine. Reset for PCI DR devices will be handled by PHB reset routine
1622 * when it walks all its children devices. LMB devices reset occurs
1623 * as part of spapr_ppc_reset().
1625 static void spapr_drc_reset(void *opaque
)
1627 sPAPRDRConnector
*drc
= opaque
;
1628 DeviceState
*d
= DEVICE(drc
);
1635 static void spapr_create_lmb_dr_connectors(sPAPRMachineState
*spapr
)
1637 MachineState
*machine
= MACHINE(spapr
);
1638 uint64_t lmb_size
= SPAPR_MEMORY_BLOCK_SIZE
;
1639 uint32_t nr_lmbs
= (machine
->maxram_size
- machine
->ram_size
)/lmb_size
;
1642 for (i
= 0; i
< nr_lmbs
; i
++) {
1643 sPAPRDRConnector
*drc
;
1646 addr
= i
* lmb_size
+ spapr
->hotplug_memory
.base
;
1647 drc
= spapr_dr_connector_new(OBJECT(spapr
), SPAPR_DR_CONNECTOR_TYPE_LMB
,
1649 qemu_register_reset(spapr_drc_reset
, drc
);
1654 * If RAM size, maxmem size and individual node mem sizes aren't aligned
1655 * to SPAPR_MEMORY_BLOCK_SIZE(256MB), then refuse to start the guest
1656 * since we can't support such unaligned sizes with DRCONF_MEMORY.
1658 static void spapr_validate_node_memory(MachineState
*machine
, Error
**errp
)
1662 if (machine
->ram_size
% SPAPR_MEMORY_BLOCK_SIZE
) {
1663 error_setg(errp
, "Memory size 0x" RAM_ADDR_FMT
1664 " is not aligned to %llu MiB",
1666 SPAPR_MEMORY_BLOCK_SIZE
/ M_BYTE
);
1670 if (machine
->maxram_size
% SPAPR_MEMORY_BLOCK_SIZE
) {
1671 error_setg(errp
, "Maximum memory size 0x" RAM_ADDR_FMT
1672 " is not aligned to %llu MiB",
1674 SPAPR_MEMORY_BLOCK_SIZE
/ M_BYTE
);
1678 for (i
= 0; i
< nb_numa_nodes
; i
++) {
1679 if (numa_info
[i
].node_mem
% SPAPR_MEMORY_BLOCK_SIZE
) {
1681 "Node %d memory size 0x%" PRIx64
1682 " is not aligned to %llu MiB",
1683 i
, numa_info
[i
].node_mem
,
1684 SPAPR_MEMORY_BLOCK_SIZE
/ M_BYTE
);
1690 /* pSeries LPAR / sPAPR hardware init */
1691 static void ppc_spapr_init(MachineState
*machine
)
1693 sPAPRMachineState
*spapr
= SPAPR_MACHINE(machine
);
1694 MachineClass
*mc
= MACHINE_GET_CLASS(machine
);
1695 sPAPRMachineClass
*smc
= SPAPR_MACHINE_GET_CLASS(machine
);
1696 const char *kernel_filename
= machine
->kernel_filename
;
1697 const char *initrd_filename
= machine
->initrd_filename
;
1700 MemoryRegion
*sysmem
= get_system_memory();
1701 MemoryRegion
*ram
= g_new(MemoryRegion
, 1);
1702 MemoryRegion
*rma_region
;
1704 hwaddr rma_alloc_size
;
1705 hwaddr node0_size
= spapr_node0_size();
1706 long load_limit
, fw_size
;
1708 int smt
= kvmppc_smt_threads();
1709 int spapr_cores
= smp_cpus
/ smp_threads
;
1710 int spapr_max_cores
= max_cpus
/ smp_threads
;
1712 if (mc
->query_hotpluggable_cpus
) {
1713 if (smp_cpus
% smp_threads
) {
1714 error_report("smp_cpus (%u) must be multiple of threads (%u)",
1715 smp_cpus
, smp_threads
);
1718 if (max_cpus
% smp_threads
) {
1719 error_report("max_cpus (%u) must be multiple of threads (%u)",
1720 max_cpus
, smp_threads
);
1725 msi_nonbroken
= true;
1727 QLIST_INIT(&spapr
->phbs
);
1729 cpu_ppc_hypercall
= emulate_spapr_hypercall
;
1731 /* Allocate RMA if necessary */
1732 rma_alloc_size
= kvmppc_alloc_rma(&rma
);
1734 if (rma_alloc_size
== -1) {
1735 error_report("Unable to create RMA");
1739 if (rma_alloc_size
&& (rma_alloc_size
< node0_size
)) {
1740 spapr
->rma_size
= rma_alloc_size
;
1742 spapr
->rma_size
= node0_size
;
1744 /* With KVM, we don't actually know whether KVM supports an
1745 * unbounded RMA (PR KVM) or is limited by the hash table size
1746 * (HV KVM using VRMA), so we always assume the latter
1748 * In that case, we also limit the initial allocations for RTAS
1749 * etc... to 256M since we have no way to know what the VRMA size
1750 * is going to be as it depends on the size of the hash table
1751 * isn't determined yet.
1753 if (kvm_enabled()) {
1754 spapr
->vrma_adjust
= 1;
1755 spapr
->rma_size
= MIN(spapr
->rma_size
, 0x10000000);
1758 /* Actually we don't support unbounded RMA anymore since we
1759 * added proper emulation of HV mode. The max we can get is
1760 * 16G which also happens to be what we configure for PAPR
1761 * mode so make sure we don't do anything bigger than that
1763 spapr
->rma_size
= MIN(spapr
->rma_size
, 0x400000000ull
);
1766 if (spapr
->rma_size
> node0_size
) {
1767 error_report("Numa node 0 has to span the RMA (%#08"HWADDR_PRIx
")",
1772 /* Setup a load limit for the ramdisk leaving room for SLOF and FDT */
1773 load_limit
= MIN(spapr
->rma_size
, RTAS_MAX_ADDR
) - FW_OVERHEAD
;
1775 /* Set up Interrupt Controller before we create the VCPUs */
1776 spapr
->xics
= xics_system_init(machine
,
1777 DIV_ROUND_UP(max_cpus
* smt
, smp_threads
),
1778 XICS_IRQS_SPAPR
, &error_fatal
);
1780 /* Set up containers for ibm,client-set-architecture negotiated options */
1781 spapr
->ov5
= spapr_ovec_new();
1782 spapr
->ov5_cas
= spapr_ovec_new();
1784 if (smc
->dr_lmb_enabled
) {
1785 spapr_ovec_set(spapr
->ov5
, OV5_DRCONF_MEMORY
);
1786 spapr_validate_node_memory(machine
, &error_fatal
);
1789 spapr_ovec_set(spapr
->ov5
, OV5_FORM1_AFFINITY
);
1791 /* advertise support for dedicated HP event source to guests */
1792 if (spapr
->use_hotplug_event_source
) {
1793 spapr_ovec_set(spapr
->ov5
, OV5_HP_EVT
);
1797 if (machine
->cpu_model
== NULL
) {
1798 machine
->cpu_model
= kvm_enabled() ? "host" : smc
->tcg_default_cpu
;
1801 ppc_cpu_parse_features(machine
->cpu_model
);
1803 if (mc
->query_hotpluggable_cpus
) {
1804 char *type
= spapr_get_cpu_core_type(machine
->cpu_model
);
1807 error_report("Unable to find sPAPR CPU Core definition");
1811 spapr
->cores
= g_new0(Object
*, spapr_max_cores
);
1812 for (i
= 0; i
< spapr_max_cores
; i
++) {
1813 int core_id
= i
* smp_threads
;
1814 sPAPRDRConnector
*drc
=
1815 spapr_dr_connector_new(OBJECT(spapr
),
1816 SPAPR_DR_CONNECTOR_TYPE_CPU
,
1817 (core_id
/ smp_threads
) * smt
);
1819 qemu_register_reset(spapr_drc_reset
, drc
);
1821 if (i
< spapr_cores
) {
1822 Object
*core
= object_new(type
);
1823 object_property_set_int(core
, smp_threads
, "nr-threads",
1825 object_property_set_int(core
, core_id
, CPU_CORE_PROP_CORE_ID
,
1827 object_property_set_bool(core
, true, "realized", &error_fatal
);
1832 for (i
= 0; i
< smp_cpus
; i
++) {
1833 PowerPCCPU
*cpu
= cpu_ppc_init(machine
->cpu_model
);
1835 error_report("Unable to find PowerPC CPU definition");
1838 spapr_cpu_init(spapr
, cpu
, &error_fatal
);
1842 if (kvm_enabled()) {
1843 /* Enable H_LOGICAL_CI_* so SLOF can talk to in-kernel devices */
1844 kvmppc_enable_logical_ci_hcalls();
1845 kvmppc_enable_set_mode_hcall();
1847 /* H_CLEAR_MOD/_REF are mandatory in PAPR, but off by default */
1848 kvmppc_enable_clear_ref_mod_hcalls();
1852 memory_region_allocate_system_memory(ram
, NULL
, "ppc_spapr.ram",
1854 memory_region_add_subregion(sysmem
, 0, ram
);
1856 if (rma_alloc_size
&& rma
) {
1857 rma_region
= g_new(MemoryRegion
, 1);
1858 memory_region_init_ram_ptr(rma_region
, NULL
, "ppc_spapr.rma",
1859 rma_alloc_size
, rma
);
1860 vmstate_register_ram_global(rma_region
);
1861 memory_region_add_subregion(sysmem
, 0, rma_region
);
1864 /* initialize hotplug memory address space */
1865 if (machine
->ram_size
< machine
->maxram_size
) {
1866 ram_addr_t hotplug_mem_size
= machine
->maxram_size
- machine
->ram_size
;
1868 * Limit the number of hotpluggable memory slots to half the number
1869 * slots that KVM supports, leaving the other half for PCI and other
1870 * devices. However ensure that number of slots doesn't drop below 32.
1872 int max_memslots
= kvm_enabled() ? kvm_get_max_memslots() / 2 :
1873 SPAPR_MAX_RAM_SLOTS
;
1875 if (max_memslots
< SPAPR_MAX_RAM_SLOTS
) {
1876 max_memslots
= SPAPR_MAX_RAM_SLOTS
;
1878 if (machine
->ram_slots
> max_memslots
) {
1879 error_report("Specified number of memory slots %"
1880 PRIu64
" exceeds max supported %d",
1881 machine
->ram_slots
, max_memslots
);
1885 spapr
->hotplug_memory
.base
= ROUND_UP(machine
->ram_size
,
1886 SPAPR_HOTPLUG_MEM_ALIGN
);
1887 memory_region_init(&spapr
->hotplug_memory
.mr
, OBJECT(spapr
),
1888 "hotplug-memory", hotplug_mem_size
);
1889 memory_region_add_subregion(sysmem
, spapr
->hotplug_memory
.base
,
1890 &spapr
->hotplug_memory
.mr
);
1893 if (smc
->dr_lmb_enabled
) {
1894 spapr_create_lmb_dr_connectors(spapr
);
1897 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, "spapr-rtas.bin");
1899 error_report("Could not find LPAR rtas '%s'", "spapr-rtas.bin");
1902 spapr
->rtas_size
= get_image_size(filename
);
1903 if (spapr
->rtas_size
< 0) {
1904 error_report("Could not get size of LPAR rtas '%s'", filename
);
1907 spapr
->rtas_blob
= g_malloc(spapr
->rtas_size
);
1908 if (load_image_size(filename
, spapr
->rtas_blob
, spapr
->rtas_size
) < 0) {
1909 error_report("Could not load LPAR rtas '%s'", filename
);
1912 if (spapr
->rtas_size
> RTAS_MAX_SIZE
) {
1913 error_report("RTAS too big ! 0x%zx bytes (max is 0x%x)",
1914 (size_t)spapr
->rtas_size
, RTAS_MAX_SIZE
);
1919 /* Set up RTAS event infrastructure */
1920 spapr_events_init(spapr
);
1922 /* Set up the RTC RTAS interfaces */
1923 spapr_rtc_create(spapr
);
1925 /* Set up VIO bus */
1926 spapr
->vio_bus
= spapr_vio_bus_init();
1928 for (i
= 0; i
< MAX_SERIAL_PORTS
; i
++) {
1929 if (serial_hds
[i
]) {
1930 spapr_vty_create(spapr
->vio_bus
, serial_hds
[i
]);
1934 /* We always have at least the nvram device on VIO */
1935 spapr_create_nvram(spapr
);
1938 spapr_pci_rtas_init();
1940 phb
= spapr_create_phb(spapr
, 0);
1942 for (i
= 0; i
< nb_nics
; i
++) {
1943 NICInfo
*nd
= &nd_table
[i
];
1946 nd
->model
= g_strdup("ibmveth");
1949 if (strcmp(nd
->model
, "ibmveth") == 0) {
1950 spapr_vlan_create(spapr
->vio_bus
, nd
);
1952 pci_nic_init_nofail(&nd_table
[i
], phb
->bus
, nd
->model
, NULL
);
1956 for (i
= 0; i
<= drive_get_max_bus(IF_SCSI
); i
++) {
1957 spapr_vscsi_create(spapr
->vio_bus
);
1961 if (spapr_vga_init(phb
->bus
, &error_fatal
)) {
1962 spapr
->has_graphics
= true;
1963 machine
->usb
|= defaults_enabled() && !machine
->usb_disabled
;
1967 if (smc
->use_ohci_by_default
) {
1968 pci_create_simple(phb
->bus
, -1, "pci-ohci");
1970 pci_create_simple(phb
->bus
, -1, "nec-usb-xhci");
1973 if (spapr
->has_graphics
) {
1974 USBBus
*usb_bus
= usb_bus_find(-1);
1976 usb_create_simple(usb_bus
, "usb-kbd");
1977 usb_create_simple(usb_bus
, "usb-mouse");
1981 if (spapr
->rma_size
< (MIN_RMA_SLOF
<< 20)) {
1983 "pSeries SLOF firmware requires >= %ldM guest RMA (Real Mode Area memory)",
1988 if (kernel_filename
) {
1989 uint64_t lowaddr
= 0;
1991 spapr
->kernel_size
= load_elf(kernel_filename
, translate_kernel_address
,
1992 NULL
, NULL
, &lowaddr
, NULL
, 1,
1993 PPC_ELF_MACHINE
, 0, 0);
1994 if (spapr
->kernel_size
== ELF_LOAD_WRONG_ENDIAN
) {
1995 spapr
->kernel_size
= load_elf(kernel_filename
,
1996 translate_kernel_address
, NULL
, NULL
,
1997 &lowaddr
, NULL
, 0, PPC_ELF_MACHINE
,
1999 spapr
->kernel_le
= spapr
->kernel_size
> 0;
2001 if (spapr
->kernel_size
< 0) {
2002 error_report("error loading %s: %s", kernel_filename
,
2003 load_elf_strerror(spapr
->kernel_size
));
2008 if (initrd_filename
) {
2009 /* Try to locate the initrd in the gap between the kernel
2010 * and the firmware. Add a bit of space just in case
2012 spapr
->initrd_base
= (KERNEL_LOAD_ADDR
+ spapr
->kernel_size
2013 + 0x1ffff) & ~0xffff;
2014 spapr
->initrd_size
= load_image_targphys(initrd_filename
,
2017 - spapr
->initrd_base
);
2018 if (spapr
->initrd_size
< 0) {
2019 error_report("could not load initial ram disk '%s'",
2026 if (bios_name
== NULL
) {
2027 bios_name
= FW_FILE_NAME
;
2029 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, bios_name
);
2031 error_report("Could not find LPAR firmware '%s'", bios_name
);
2034 fw_size
= load_image_targphys(filename
, 0, FW_MAX_SIZE
);
2036 error_report("Could not load LPAR firmware '%s'", filename
);
2041 /* FIXME: Should register things through the MachineState's qdev
2042 * interface, this is a legacy from the sPAPREnvironment structure
2043 * which predated MachineState but had a similar function */
2044 vmstate_register(NULL
, 0, &vmstate_spapr
, spapr
);
2045 register_savevm_live(NULL
, "spapr/htab", -1, 1,
2046 &savevm_htab_handlers
, spapr
);
2049 QTAILQ_INIT(&spapr
->ccs_list
);
2050 qemu_register_reset(spapr_ccs_reset_hook
, spapr
);
2052 qemu_register_boot_set(spapr_boot_set
, spapr
);
2055 static int spapr_kvm_type(const char *vm_type
)
2061 if (!strcmp(vm_type
, "HV")) {
2065 if (!strcmp(vm_type
, "PR")) {
2069 error_report("Unknown kvm-type specified '%s'", vm_type
);
2074 * Implementation of an interface to adjust firmware path
2075 * for the bootindex property handling.
2077 static char *spapr_get_fw_dev_path(FWPathProvider
*p
, BusState
*bus
,
2080 #define CAST(type, obj, name) \
2081 ((type *)object_dynamic_cast(OBJECT(obj), (name)))
2082 SCSIDevice
*d
= CAST(SCSIDevice
, dev
, TYPE_SCSI_DEVICE
);
2083 sPAPRPHBState
*phb
= CAST(sPAPRPHBState
, dev
, TYPE_SPAPR_PCI_HOST_BRIDGE
);
2086 void *spapr
= CAST(void, bus
->parent
, "spapr-vscsi");
2087 VirtIOSCSI
*virtio
= CAST(VirtIOSCSI
, bus
->parent
, TYPE_VIRTIO_SCSI
);
2088 USBDevice
*usb
= CAST(USBDevice
, bus
->parent
, TYPE_USB_DEVICE
);
2092 * Replace "channel@0/disk@0,0" with "disk@8000000000000000":
2093 * We use SRP luns of the form 8000 | (bus << 8) | (id << 5) | lun
2094 * in the top 16 bits of the 64-bit LUN
2096 unsigned id
= 0x8000 | (d
->id
<< 8) | d
->lun
;
2097 return g_strdup_printf("%s@%"PRIX64
, qdev_fw_name(dev
),
2098 (uint64_t)id
<< 48);
2099 } else if (virtio
) {
2101 * We use SRP luns of the form 01000000 | (target << 8) | lun
2102 * in the top 32 bits of the 64-bit LUN
2103 * Note: the quote above is from SLOF and it is wrong,
2104 * the actual binding is:
2105 * swap 0100 or 10 << or 20 << ( target lun-id -- srplun )
2107 unsigned id
= 0x1000000 | (d
->id
<< 16) | d
->lun
;
2108 return g_strdup_printf("%s@%"PRIX64
, qdev_fw_name(dev
),
2109 (uint64_t)id
<< 32);
2112 * We use SRP luns of the form 01000000 | (usb-port << 16) | lun
2113 * in the top 32 bits of the 64-bit LUN
2115 unsigned usb_port
= atoi(usb
->port
->path
);
2116 unsigned id
= 0x1000000 | (usb_port
<< 16) | d
->lun
;
2117 return g_strdup_printf("%s@%"PRIX64
, qdev_fw_name(dev
),
2118 (uint64_t)id
<< 32);
2123 /* Replace "pci" with "pci@800000020000000" */
2124 return g_strdup_printf("pci@%"PRIX64
, phb
->buid
);
2130 static char *spapr_get_kvm_type(Object
*obj
, Error
**errp
)
2132 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2134 return g_strdup(spapr
->kvm_type
);
2137 static void spapr_set_kvm_type(Object
*obj
, const char *value
, Error
**errp
)
2139 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2141 g_free(spapr
->kvm_type
);
2142 spapr
->kvm_type
= g_strdup(value
);
2145 static bool spapr_get_modern_hotplug_events(Object
*obj
, Error
**errp
)
2147 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2149 return spapr
->use_hotplug_event_source
;
2152 static void spapr_set_modern_hotplug_events(Object
*obj
, bool value
,
2155 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2157 spapr
->use_hotplug_event_source
= value
;
2160 static void spapr_machine_initfn(Object
*obj
)
2162 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2164 spapr
->htab_fd
= -1;
2165 spapr
->use_hotplug_event_source
= true;
2166 object_property_add_str(obj
, "kvm-type",
2167 spapr_get_kvm_type
, spapr_set_kvm_type
, NULL
);
2168 object_property_set_description(obj
, "kvm-type",
2169 "Specifies the KVM virtualization mode (HV, PR)",
2171 object_property_add_bool(obj
, "modern-hotplug-events",
2172 spapr_get_modern_hotplug_events
,
2173 spapr_set_modern_hotplug_events
,
2175 object_property_set_description(obj
, "modern-hotplug-events",
2176 "Use dedicated hotplug event mechanism in"
2177 " place of standard EPOW events when possible"
2178 " (required for memory hot-unplug support)",
2182 static void spapr_machine_finalizefn(Object
*obj
)
2184 sPAPRMachineState
*spapr
= SPAPR_MACHINE(obj
);
2186 g_free(spapr
->kvm_type
);
2189 static void ppc_cpu_do_nmi_on_cpu(CPUState
*cs
, void *arg
)
2191 cpu_synchronize_state(cs
);
2192 ppc_cpu_do_system_reset(cs
);
2195 static void spapr_nmi(NMIState
*n
, int cpu_index
, Error
**errp
)
2200 async_run_on_cpu(cs
, ppc_cpu_do_nmi_on_cpu
, NULL
);
2204 static void spapr_add_lmbs(DeviceState
*dev
, uint64_t addr_start
, uint64_t size
,
2205 uint32_t node
, bool dedicated_hp_event_source
,
2208 sPAPRDRConnector
*drc
;
2209 sPAPRDRConnectorClass
*drck
;
2210 uint32_t nr_lmbs
= size
/SPAPR_MEMORY_BLOCK_SIZE
;
2211 int i
, fdt_offset
, fdt_size
;
2213 uint64_t addr
= addr_start
;
2215 for (i
= 0; i
< nr_lmbs
; i
++) {
2216 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2217 addr
/SPAPR_MEMORY_BLOCK_SIZE
);
2220 fdt
= create_device_tree(&fdt_size
);
2221 fdt_offset
= spapr_populate_memory_node(fdt
, node
, addr
,
2222 SPAPR_MEMORY_BLOCK_SIZE
);
2224 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
2225 drck
->attach(drc
, dev
, fdt
, fdt_offset
, !dev
->hotplugged
, errp
);
2226 addr
+= SPAPR_MEMORY_BLOCK_SIZE
;
2228 /* send hotplug notification to the
2229 * guest only in case of hotplugged memory
2231 if (dev
->hotplugged
) {
2232 if (dedicated_hp_event_source
) {
2233 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2234 addr_start
/ SPAPR_MEMORY_BLOCK_SIZE
);
2235 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
2236 spapr_hotplug_req_add_by_count_indexed(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2238 drck
->get_index(drc
));
2240 spapr_hotplug_req_add_by_count(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2246 static void spapr_memory_plug(HotplugHandler
*hotplug_dev
, DeviceState
*dev
,
2247 uint32_t node
, Error
**errp
)
2249 Error
*local_err
= NULL
;
2250 sPAPRMachineState
*ms
= SPAPR_MACHINE(hotplug_dev
);
2251 PCDIMMDevice
*dimm
= PC_DIMM(dev
);
2252 PCDIMMDeviceClass
*ddc
= PC_DIMM_GET_CLASS(dimm
);
2253 MemoryRegion
*mr
= ddc
->get_memory_region(dimm
);
2254 uint64_t align
= memory_region_get_alignment(mr
);
2255 uint64_t size
= memory_region_size(mr
);
2258 if (size
% SPAPR_MEMORY_BLOCK_SIZE
) {
2259 error_setg(&local_err
, "Hotplugged memory size must be a multiple of "
2260 "%lld MB", SPAPR_MEMORY_BLOCK_SIZE
/M_BYTE
);
2264 pc_dimm_memory_plug(dev
, &ms
->hotplug_memory
, mr
, align
, &local_err
);
2269 addr
= object_property_get_int(OBJECT(dimm
), PC_DIMM_ADDR_PROP
, &local_err
);
2271 pc_dimm_memory_unplug(dev
, &ms
->hotplug_memory
, mr
);
2275 spapr_add_lmbs(dev
, addr
, size
, node
,
2276 spapr_ovec_test(ms
->ov5_cas
, OV5_HP_EVT
),
2280 error_propagate(errp
, local_err
);
2283 typedef struct sPAPRDIMMState
{
2287 static void spapr_lmb_release(DeviceState
*dev
, void *opaque
)
2289 sPAPRDIMMState
*ds
= (sPAPRDIMMState
*)opaque
;
2290 HotplugHandler
*hotplug_ctrl
;
2292 if (--ds
->nr_lmbs
) {
2299 * Now that all the LMBs have been removed by the guest, call the
2300 * pc-dimm unplug handler to cleanup up the pc-dimm device.
2302 hotplug_ctrl
= qdev_get_hotplug_handler(dev
);
2303 hotplug_handler_unplug(hotplug_ctrl
, dev
, &error_abort
);
2306 static void spapr_del_lmbs(DeviceState
*dev
, uint64_t addr_start
, uint64_t size
,
2309 sPAPRDRConnector
*drc
;
2310 sPAPRDRConnectorClass
*drck
;
2311 uint32_t nr_lmbs
= size
/ SPAPR_MEMORY_BLOCK_SIZE
;
2313 sPAPRDIMMState
*ds
= g_malloc0(sizeof(sPAPRDIMMState
));
2314 uint64_t addr
= addr_start
;
2316 ds
->nr_lmbs
= nr_lmbs
;
2317 for (i
= 0; i
< nr_lmbs
; i
++) {
2318 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2319 addr
/ SPAPR_MEMORY_BLOCK_SIZE
);
2322 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
2323 drck
->detach(drc
, dev
, spapr_lmb_release
, ds
, errp
);
2324 addr
+= SPAPR_MEMORY_BLOCK_SIZE
;
2327 drc
= spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2328 addr_start
/ SPAPR_MEMORY_BLOCK_SIZE
);
2329 drck
= SPAPR_DR_CONNECTOR_GET_CLASS(drc
);
2330 spapr_hotplug_req_remove_by_count_indexed(SPAPR_DR_CONNECTOR_TYPE_LMB
,
2332 drck
->get_index(drc
));
2335 static void spapr_memory_unplug(HotplugHandler
*hotplug_dev
, DeviceState
*dev
,
2338 sPAPRMachineState
*ms
= SPAPR_MACHINE(hotplug_dev
);
2339 PCDIMMDevice
*dimm
= PC_DIMM(dev
);
2340 PCDIMMDeviceClass
*ddc
= PC_DIMM_GET_CLASS(dimm
);
2341 MemoryRegion
*mr
= ddc
->get_memory_region(dimm
);
2343 pc_dimm_memory_unplug(dev
, &ms
->hotplug_memory
, mr
);
2344 object_unparent(OBJECT(dev
));
2347 static void spapr_memory_unplug_request(HotplugHandler
*hotplug_dev
,
2348 DeviceState
*dev
, Error
**errp
)
2350 Error
*local_err
= NULL
;
2351 PCDIMMDevice
*dimm
= PC_DIMM(dev
);
2352 PCDIMMDeviceClass
*ddc
= PC_DIMM_GET_CLASS(dimm
);
2353 MemoryRegion
*mr
= ddc
->get_memory_region(dimm
);
2354 uint64_t size
= memory_region_size(mr
);
2357 addr
= object_property_get_int(OBJECT(dimm
), PC_DIMM_ADDR_PROP
, &local_err
);
2362 spapr_del_lmbs(dev
, addr
, size
, &error_abort
);
2364 error_propagate(errp
, local_err
);
2367 void *spapr_populate_hotplug_cpu_dt(CPUState
*cs
, int *fdt_offset
,
2368 sPAPRMachineState
*spapr
)
2370 PowerPCCPU
*cpu
= POWERPC_CPU(cs
);
2371 DeviceClass
*dc
= DEVICE_GET_CLASS(cs
);
2372 int id
= ppc_get_vcpu_dt_id(cpu
);
2374 int offset
, fdt_size
;
2377 fdt
= create_device_tree(&fdt_size
);
2378 nodename
= g_strdup_printf("%s@%x", dc
->fw_name
, id
);
2379 offset
= fdt_add_subnode(fdt
, 0, nodename
);
2381 spapr_populate_cpu_dt(cs
, fdt
, offset
, spapr
);
2384 *fdt_offset
= offset
;
2388 static void spapr_machine_device_plug(HotplugHandler
*hotplug_dev
,
2389 DeviceState
*dev
, Error
**errp
)
2391 sPAPRMachineClass
*smc
= SPAPR_MACHINE_GET_CLASS(qdev_get_machine());
2393 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
2396 if (!smc
->dr_lmb_enabled
) {
2397 error_setg(errp
, "Memory hotplug not supported for this machine");
2400 node
= object_property_get_int(OBJECT(dev
), PC_DIMM_NODE_PROP
, errp
);
2404 if (node
< 0 || node
>= MAX_NODES
) {
2405 error_setg(errp
, "Invaild node %d", node
);
2410 * Currently PowerPC kernel doesn't allow hot-adding memory to
2411 * memory-less node, but instead will silently add the memory
2412 * to the first node that has some memory. This causes two
2413 * unexpected behaviours for the user.
2415 * - Memory gets hotplugged to a different node than what the user
2417 * - Since pc-dimm subsystem in QEMU still thinks that memory belongs
2418 * to memory-less node, a reboot will set things accordingly
2419 * and the previously hotplugged memory now ends in the right node.
2420 * This appears as if some memory moved from one node to another.
2422 * So until kernel starts supporting memory hotplug to memory-less
2423 * nodes, just prevent such attempts upfront in QEMU.
2425 if (nb_numa_nodes
&& !numa_info
[node
].node_mem
) {
2426 error_setg(errp
, "Can't hotplug memory to memory-less node %d",
2431 spapr_memory_plug(hotplug_dev
, dev
, node
, errp
);
2432 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_SPAPR_CPU_CORE
)) {
2433 spapr_core_plug(hotplug_dev
, dev
, errp
);
2437 static void spapr_machine_device_unplug(HotplugHandler
*hotplug_dev
,
2438 DeviceState
*dev
, Error
**errp
)
2440 sPAPRMachineState
*sms
= SPAPR_MACHINE(qdev_get_machine());
2441 MachineClass
*mc
= MACHINE_GET_CLASS(qdev_get_machine());
2443 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
2444 if (spapr_ovec_test(sms
->ov5_cas
, OV5_HP_EVT
)) {
2445 spapr_memory_unplug(hotplug_dev
, dev
, errp
);
2447 error_setg(errp
, "Memory hot unplug not supported for this guest");
2449 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_SPAPR_CPU_CORE
)) {
2450 if (!mc
->query_hotpluggable_cpus
) {
2451 error_setg(errp
, "CPU hot unplug not supported on this machine");
2454 spapr_core_unplug(hotplug_dev
, dev
, errp
);
2458 static void spapr_machine_device_unplug_request(HotplugHandler
*hotplug_dev
,
2459 DeviceState
*dev
, Error
**errp
)
2461 sPAPRMachineState
*sms
= SPAPR_MACHINE(qdev_get_machine());
2462 MachineClass
*mc
= MACHINE_GET_CLASS(qdev_get_machine());
2464 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
2465 if (spapr_ovec_test(sms
->ov5_cas
, OV5_HP_EVT
)) {
2466 spapr_memory_unplug_request(hotplug_dev
, dev
, errp
);
2468 /* NOTE: this means there is a window after guest reset, prior to
2469 * CAS negotiation, where unplug requests will fail due to the
2470 * capability not being detected yet. This is a bit different than
2471 * the case with PCI unplug, where the events will be queued and
2472 * eventually handled by the guest after boot
2474 error_setg(errp
, "Memory hot unplug not supported for this guest");
2476 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_SPAPR_CPU_CORE
)) {
2477 if (!mc
->query_hotpluggable_cpus
) {
2478 error_setg(errp
, "CPU hot unplug not supported on this machine");
2481 spapr_core_unplug(hotplug_dev
, dev
, errp
);
2485 static void spapr_machine_device_pre_plug(HotplugHandler
*hotplug_dev
,
2486 DeviceState
*dev
, Error
**errp
)
2488 if (object_dynamic_cast(OBJECT(dev
), TYPE_SPAPR_CPU_CORE
)) {
2489 spapr_core_pre_plug(hotplug_dev
, dev
, errp
);
2493 static HotplugHandler
*spapr_get_hotplug_handler(MachineState
*machine
,
2496 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
) ||
2497 object_dynamic_cast(OBJECT(dev
), TYPE_SPAPR_CPU_CORE
)) {
2498 return HOTPLUG_HANDLER(machine
);
2503 static unsigned spapr_cpu_index_to_socket_id(unsigned cpu_index
)
2505 /* Allocate to NUMA nodes on a "socket" basis (not that concept of
2506 * socket means much for the paravirtualized PAPR platform) */
2507 return cpu_index
/ smp_threads
/ smp_cores
;
2510 static HotpluggableCPUList
*spapr_query_hotpluggable_cpus(MachineState
*machine
)
2513 HotpluggableCPUList
*head
= NULL
;
2514 sPAPRMachineState
*spapr
= SPAPR_MACHINE(machine
);
2515 int spapr_max_cores
= max_cpus
/ smp_threads
;
2517 for (i
= 0; i
< spapr_max_cores
; i
++) {
2518 HotpluggableCPUList
*list_item
= g_new0(typeof(*list_item
), 1);
2519 HotpluggableCPU
*cpu_item
= g_new0(typeof(*cpu_item
), 1);
2520 CpuInstanceProperties
*cpu_props
= g_new0(typeof(*cpu_props
), 1);
2522 cpu_item
->type
= spapr_get_cpu_core_type(machine
->cpu_model
);
2523 cpu_item
->vcpus_count
= smp_threads
;
2524 cpu_props
->has_core_id
= true;
2525 cpu_props
->core_id
= i
* smp_threads
;
2526 /* TODO: add 'has_node/node' here to describe
2527 to which node core belongs */
2529 cpu_item
->props
= cpu_props
;
2530 if (spapr
->cores
[i
]) {
2531 cpu_item
->has_qom_path
= true;
2532 cpu_item
->qom_path
= object_get_canonical_path(spapr
->cores
[i
]);
2534 list_item
->value
= cpu_item
;
2535 list_item
->next
= head
;
2541 static void spapr_phb_placement(sPAPRMachineState
*spapr
, uint32_t index
,
2542 uint64_t *buid
, hwaddr
*pio
,
2543 hwaddr
*mmio32
, hwaddr
*mmio64
,
2544 unsigned n_dma
, uint32_t *liobns
, Error
**errp
)
2547 * New-style PHB window placement.
2549 * Goals: Gives large (1TiB), naturally aligned 64-bit MMIO window
2550 * for each PHB, in addition to 2GiB 32-bit MMIO and 64kiB PIO
2553 * Some guest kernels can't work with MMIO windows above 1<<46
2554 * (64TiB), so we place up to 31 PHBs in the area 32TiB..64TiB
2556 * 32TiB..(33TiB+1984kiB) contains the 64kiB PIO windows for each
2557 * PHB stacked together. (32TiB+2GiB)..(32TiB+64GiB) contains the
2558 * 2GiB 32-bit MMIO windows for each PHB. Then 33..64TiB has the
2559 * 1TiB 64-bit MMIO windows for each PHB.
2561 const uint64_t base_buid
= 0x800000020000000ULL
;
2562 const int max_phbs
=
2563 (SPAPR_PCI_LIMIT
- SPAPR_PCI_BASE
) / SPAPR_PCI_MEM64_WIN_SIZE
- 1;
2566 /* Sanity check natural alignments */
2567 QEMU_BUILD_BUG_ON((SPAPR_PCI_BASE
% SPAPR_PCI_MEM64_WIN_SIZE
) != 0);
2568 QEMU_BUILD_BUG_ON((SPAPR_PCI_LIMIT
% SPAPR_PCI_MEM64_WIN_SIZE
) != 0);
2569 QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM64_WIN_SIZE
% SPAPR_PCI_MEM32_WIN_SIZE
) != 0);
2570 QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM32_WIN_SIZE
% SPAPR_PCI_IO_WIN_SIZE
) != 0);
2571 /* Sanity check bounds */
2572 QEMU_BUILD_BUG_ON((max_phbs
* SPAPR_PCI_IO_WIN_SIZE
) > SPAPR_PCI_MEM32_WIN_SIZE
);
2573 QEMU_BUILD_BUG_ON((max_phbs
* SPAPR_PCI_MEM32_WIN_SIZE
) > SPAPR_PCI_MEM64_WIN_SIZE
);
2575 if (index
>= max_phbs
) {
2576 error_setg(errp
, "\"index\" for PAPR PHB is too large (max %u)",
2581 *buid
= base_buid
+ index
;
2582 for (i
= 0; i
< n_dma
; ++i
) {
2583 liobns
[i
] = SPAPR_PCI_LIOBN(index
, i
);
2586 *pio
= SPAPR_PCI_BASE
+ index
* SPAPR_PCI_IO_WIN_SIZE
;
2587 *mmio32
= SPAPR_PCI_BASE
+ (index
+ 1) * SPAPR_PCI_MEM32_WIN_SIZE
;
2588 *mmio64
= SPAPR_PCI_BASE
+ (index
+ 1) * SPAPR_PCI_MEM64_WIN_SIZE
;
2591 static void spapr_machine_class_init(ObjectClass
*oc
, void *data
)
2593 MachineClass
*mc
= MACHINE_CLASS(oc
);
2594 sPAPRMachineClass
*smc
= SPAPR_MACHINE_CLASS(oc
);
2595 FWPathProviderClass
*fwc
= FW_PATH_PROVIDER_CLASS(oc
);
2596 NMIClass
*nc
= NMI_CLASS(oc
);
2597 HotplugHandlerClass
*hc
= HOTPLUG_HANDLER_CLASS(oc
);
2599 mc
->desc
= "pSeries Logical Partition (PAPR compliant)";
2602 * We set up the default / latest behaviour here. The class_init
2603 * functions for the specific versioned machine types can override
2604 * these details for backwards compatibility
2606 mc
->init
= ppc_spapr_init
;
2607 mc
->reset
= ppc_spapr_reset
;
2608 mc
->block_default_type
= IF_SCSI
;
2610 mc
->no_parallel
= 1;
2611 mc
->default_boot_order
= "";
2612 mc
->default_ram_size
= 512 * M_BYTE
;
2613 mc
->kvm_type
= spapr_kvm_type
;
2614 mc
->has_dynamic_sysbus
= true;
2615 mc
->pci_allow_0_address
= true;
2616 mc
->get_hotplug_handler
= spapr_get_hotplug_handler
;
2617 hc
->pre_plug
= spapr_machine_device_pre_plug
;
2618 hc
->plug
= spapr_machine_device_plug
;
2619 hc
->unplug
= spapr_machine_device_unplug
;
2620 mc
->cpu_index_to_socket_id
= spapr_cpu_index_to_socket_id
;
2621 hc
->unplug_request
= spapr_machine_device_unplug_request
;
2623 smc
->dr_lmb_enabled
= true;
2624 smc
->tcg_default_cpu
= "POWER8";
2625 mc
->query_hotpluggable_cpus
= spapr_query_hotpluggable_cpus
;
2626 fwc
->get_dev_path
= spapr_get_fw_dev_path
;
2627 nc
->nmi_monitor_handler
= spapr_nmi
;
2628 smc
->phb_placement
= spapr_phb_placement
;
2631 static const TypeInfo spapr_machine_info
= {
2632 .name
= TYPE_SPAPR_MACHINE
,
2633 .parent
= TYPE_MACHINE
,
2635 .instance_size
= sizeof(sPAPRMachineState
),
2636 .instance_init
= spapr_machine_initfn
,
2637 .instance_finalize
= spapr_machine_finalizefn
,
2638 .class_size
= sizeof(sPAPRMachineClass
),
2639 .class_init
= spapr_machine_class_init
,
2640 .interfaces
= (InterfaceInfo
[]) {
2641 { TYPE_FW_PATH_PROVIDER
},
2643 { TYPE_HOTPLUG_HANDLER
},
2648 #define DEFINE_SPAPR_MACHINE(suffix, verstr, latest) \
2649 static void spapr_machine_##suffix##_class_init(ObjectClass *oc, \
2652 MachineClass *mc = MACHINE_CLASS(oc); \
2653 spapr_machine_##suffix##_class_options(mc); \
2655 mc->alias = "pseries"; \
2656 mc->is_default = 1; \
2659 static void spapr_machine_##suffix##_instance_init(Object *obj) \
2661 MachineState *machine = MACHINE(obj); \
2662 spapr_machine_##suffix##_instance_options(machine); \
2664 static const TypeInfo spapr_machine_##suffix##_info = { \
2665 .name = MACHINE_TYPE_NAME("pseries-" verstr), \
2666 .parent = TYPE_SPAPR_MACHINE, \
2667 .class_init = spapr_machine_##suffix##_class_init, \
2668 .instance_init = spapr_machine_##suffix##_instance_init, \
2670 static void spapr_machine_register_##suffix(void) \
2672 type_register(&spapr_machine_##suffix##_info); \
2674 type_init(spapr_machine_register_##suffix)
2679 static void spapr_machine_2_8_instance_options(MachineState
*machine
)
2683 static void spapr_machine_2_8_class_options(MachineClass
*mc
)
2685 /* Defaults for the latest behaviour inherited from the base class */
2688 DEFINE_SPAPR_MACHINE(2_8
, "2.8", true);
2693 #define SPAPR_COMPAT_2_7 \
2696 .driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
2697 .property = "mem_win_size", \
2698 .value = stringify(SPAPR_PCI_2_7_MMIO_WIN_SIZE),\
2701 .driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
2702 .property = "mem64_win_size", \
2706 static void phb_placement_2_7(sPAPRMachineState
*spapr
, uint32_t index
,
2707 uint64_t *buid
, hwaddr
*pio
,
2708 hwaddr
*mmio32
, hwaddr
*mmio64
,
2709 unsigned n_dma
, uint32_t *liobns
, Error
**errp
)
2711 /* Legacy PHB placement for pseries-2.7 and earlier machine types */
2712 const uint64_t base_buid
= 0x800000020000000ULL
;
2713 const hwaddr phb_spacing
= 0x1000000000ULL
; /* 64 GiB */
2714 const hwaddr mmio_offset
= 0xa0000000; /* 2 GiB + 512 MiB */
2715 const hwaddr pio_offset
= 0x80000000; /* 2 GiB */
2716 const uint32_t max_index
= 255;
2717 const hwaddr phb0_alignment
= 0x10000000000ULL
; /* 1 TiB */
2719 uint64_t ram_top
= MACHINE(spapr
)->ram_size
;
2720 hwaddr phb0_base
, phb_base
;
2723 /* Do we have hotpluggable memory? */
2724 if (MACHINE(spapr
)->maxram_size
> ram_top
) {
2725 /* Can't just use maxram_size, because there may be an
2726 * alignment gap between normal and hotpluggable memory
2728 ram_top
= spapr
->hotplug_memory
.base
+
2729 memory_region_size(&spapr
->hotplug_memory
.mr
);
2732 phb0_base
= QEMU_ALIGN_UP(ram_top
, phb0_alignment
);
2734 if (index
> max_index
) {
2735 error_setg(errp
, "\"index\" for PAPR PHB is too large (max %u)",
2740 *buid
= base_buid
+ index
;
2741 for (i
= 0; i
< n_dma
; ++i
) {
2742 liobns
[i
] = SPAPR_PCI_LIOBN(index
, i
);
2745 phb_base
= phb0_base
+ index
* phb_spacing
;
2746 *pio
= phb_base
+ pio_offset
;
2747 *mmio32
= phb_base
+ mmio_offset
;
2749 * We don't set the 64-bit MMIO window, relying on the PHB's
2750 * fallback behaviour of automatically splitting a large "32-bit"
2751 * window into contiguous 32-bit and 64-bit windows
2755 static void spapr_machine_2_7_instance_options(MachineState
*machine
)
2757 sPAPRMachineState
*spapr
= SPAPR_MACHINE(machine
);
2759 spapr_machine_2_8_instance_options(machine
);
2760 spapr
->use_hotplug_event_source
= false;
2763 static void spapr_machine_2_7_class_options(MachineClass
*mc
)
2765 sPAPRMachineClass
*smc
= SPAPR_MACHINE_CLASS(mc
);
2767 spapr_machine_2_8_class_options(mc
);
2768 smc
->tcg_default_cpu
= "POWER7";
2769 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_7
);
2770 smc
->phb_placement
= phb_placement_2_7
;
2773 DEFINE_SPAPR_MACHINE(2_7
, "2.7", false);
2778 #define SPAPR_COMPAT_2_6 \
2781 .driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
2783 .value = stringify(off),\
2786 static void spapr_machine_2_6_instance_options(MachineState
*machine
)
2788 spapr_machine_2_7_instance_options(machine
);
2791 static void spapr_machine_2_6_class_options(MachineClass
*mc
)
2793 spapr_machine_2_7_class_options(mc
);
2794 mc
->query_hotpluggable_cpus
= NULL
;
2795 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_6
);
2798 DEFINE_SPAPR_MACHINE(2_6
, "2.6", false);
2803 #define SPAPR_COMPAT_2_5 \
2806 .driver = "spapr-vlan", \
2807 .property = "use-rx-buffer-pools", \
2811 static void spapr_machine_2_5_instance_options(MachineState
*machine
)
2813 spapr_machine_2_6_instance_options(machine
);
2816 static void spapr_machine_2_5_class_options(MachineClass
*mc
)
2818 sPAPRMachineClass
*smc
= SPAPR_MACHINE_CLASS(mc
);
2820 spapr_machine_2_6_class_options(mc
);
2821 smc
->use_ohci_by_default
= true;
2822 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_5
);
2825 DEFINE_SPAPR_MACHINE(2_5
, "2.5", false);
2830 #define SPAPR_COMPAT_2_4 \
2833 static void spapr_machine_2_4_instance_options(MachineState
*machine
)
2835 spapr_machine_2_5_instance_options(machine
);
2838 static void spapr_machine_2_4_class_options(MachineClass
*mc
)
2840 sPAPRMachineClass
*smc
= SPAPR_MACHINE_CLASS(mc
);
2842 spapr_machine_2_5_class_options(mc
);
2843 smc
->dr_lmb_enabled
= false;
2844 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_4
);
2847 DEFINE_SPAPR_MACHINE(2_4
, "2.4", false);
2852 #define SPAPR_COMPAT_2_3 \
2855 .driver = "spapr-pci-host-bridge",\
2856 .property = "dynamic-reconfiguration",\
2860 static void spapr_machine_2_3_instance_options(MachineState
*machine
)
2862 spapr_machine_2_4_instance_options(machine
);
2863 savevm_skip_section_footers();
2864 global_state_set_optional();
2865 savevm_skip_configuration();
2868 static void spapr_machine_2_3_class_options(MachineClass
*mc
)
2870 spapr_machine_2_4_class_options(mc
);
2871 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_3
);
2873 DEFINE_SPAPR_MACHINE(2_3
, "2.3", false);
2879 #define SPAPR_COMPAT_2_2 \
2882 .driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
2883 .property = "mem_win_size",\
2884 .value = "0x20000000",\
2887 static void spapr_machine_2_2_instance_options(MachineState
*machine
)
2889 spapr_machine_2_3_instance_options(machine
);
2890 machine
->suppress_vmdesc
= true;
2893 static void spapr_machine_2_2_class_options(MachineClass
*mc
)
2895 spapr_machine_2_3_class_options(mc
);
2896 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_2
);
2898 DEFINE_SPAPR_MACHINE(2_2
, "2.2", false);
2903 #define SPAPR_COMPAT_2_1 \
2906 static void spapr_machine_2_1_instance_options(MachineState
*machine
)
2908 spapr_machine_2_2_instance_options(machine
);
2911 static void spapr_machine_2_1_class_options(MachineClass
*mc
)
2913 spapr_machine_2_2_class_options(mc
);
2914 SET_MACHINE_COMPAT(mc
, SPAPR_COMPAT_2_1
);
2916 DEFINE_SPAPR_MACHINE(2_1
, "2.1", false);
2918 static void spapr_machine_register_types(void)
2920 type_register_static(&spapr_machine_info
);
2923 type_init(spapr_machine_register_types
)