]> git.proxmox.com Git - mirror_qemu.git/blob - hw/scsi/scsi-disk.c
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
[mirror_qemu.git] / hw / scsi / scsi-disk.c
1 /*
2 * SCSI Device emulation
3 *
4 * Copyright (c) 2006 CodeSourcery.
5 * Based on code by Fabrice Bellard
6 *
7 * Written by Paul Brook
8 * Modifications:
9 * 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
10 * when the allocation length of CDB is smaller
11 * than 36.
12 * 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
13 * MODE SENSE response.
14 *
15 * This code is licensed under the LGPL.
16 *
17 * Note that this file only handles the SCSI architecture model and device
18 * commands. Emulation of interface/link layer protocols is handled by
19 * the host adapter emulator.
20 */
21
22 //#define DEBUG_SCSI
23
24 #ifdef DEBUG_SCSI
25 #define DPRINTF(fmt, ...) \
26 do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
27 #else
28 #define DPRINTF(fmt, ...) do {} while(0)
29 #endif
30
31 #include "qemu-common.h"
32 #include "qemu/error-report.h"
33 #include "hw/scsi/scsi.h"
34 #include "block/scsi.h"
35 #include "sysemu/sysemu.h"
36 #include "sysemu/blockdev.h"
37 #include "hw/block/block.h"
38 #include "sysemu/dma.h"
39
40 #ifdef __linux
41 #include <scsi/sg.h>
42 #endif
43
44 #define SCSI_WRITE_SAME_MAX 524288
45 #define SCSI_DMA_BUF_SIZE 131072
46 #define SCSI_MAX_INQUIRY_LEN 256
47 #define SCSI_MAX_MODE_LEN 256
48
49 #define DEFAULT_DISCARD_GRANULARITY 4096
50 #define DEFAULT_MAX_UNMAP_SIZE (1 << 30) /* 1 GB */
51
52 typedef struct SCSIDiskState SCSIDiskState;
53
54 typedef struct SCSIDiskReq {
55 SCSIRequest req;
56 /* Both sector and sector_count are in terms of qemu 512 byte blocks. */
57 uint64_t sector;
58 uint32_t sector_count;
59 uint32_t buflen;
60 bool started;
61 struct iovec iov;
62 QEMUIOVector qiov;
63 BlockAcctCookie acct;
64 } SCSIDiskReq;
65
66 #define SCSI_DISK_F_REMOVABLE 0
67 #define SCSI_DISK_F_DPOFUA 1
68 #define SCSI_DISK_F_NO_REMOVABLE_DEVOPS 2
69
70 struct SCSIDiskState
71 {
72 SCSIDevice qdev;
73 uint32_t features;
74 bool media_changed;
75 bool media_event;
76 bool eject_request;
77 uint64_t wwn;
78 uint64_t max_unmap_size;
79 QEMUBH *bh;
80 char *version;
81 char *serial;
82 char *vendor;
83 char *product;
84 bool tray_open;
85 bool tray_locked;
86 };
87
88 static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
89
90 static void scsi_free_request(SCSIRequest *req)
91 {
92 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
93
94 qemu_vfree(r->iov.iov_base);
95 }
96
97 /* Helper function for command completion with sense. */
98 static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
99 {
100 DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
101 r->req.tag, sense.key, sense.asc, sense.ascq);
102 scsi_req_build_sense(&r->req, sense);
103 scsi_req_complete(&r->req, CHECK_CONDITION);
104 }
105
106 /* Cancel a pending data transfer. */
107 static void scsi_cancel_io(SCSIRequest *req)
108 {
109 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
110
111 DPRINTF("Cancel tag=0x%x\n", req->tag);
112 if (r->req.aiocb) {
113 bdrv_aio_cancel(r->req.aiocb);
114
115 /* This reference was left in by scsi_*_data. We take ownership of
116 * it the moment scsi_req_cancel is called, independent of whether
117 * bdrv_aio_cancel completes the request or not. */
118 scsi_req_unref(&r->req);
119 }
120 r->req.aiocb = NULL;
121 }
122
123 static uint32_t scsi_init_iovec(SCSIDiskReq *r, size_t size)
124 {
125 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
126
127 if (!r->iov.iov_base) {
128 r->buflen = size;
129 r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
130 }
131 r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
132 qemu_iovec_init_external(&r->qiov, &r->iov, 1);
133 return r->qiov.size / 512;
134 }
135
136 static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req)
137 {
138 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
139
140 qemu_put_be64s(f, &r->sector);
141 qemu_put_be32s(f, &r->sector_count);
142 qemu_put_be32s(f, &r->buflen);
143 if (r->buflen) {
144 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
145 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
146 } else if (!req->retry) {
147 uint32_t len = r->iov.iov_len;
148 qemu_put_be32s(f, &len);
149 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
150 }
151 }
152 }
153
154 static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
155 {
156 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
157
158 qemu_get_be64s(f, &r->sector);
159 qemu_get_be32s(f, &r->sector_count);
160 qemu_get_be32s(f, &r->buflen);
161 if (r->buflen) {
162 scsi_init_iovec(r, r->buflen);
163 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
164 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
165 } else if (!r->req.retry) {
166 uint32_t len;
167 qemu_get_be32s(f, &len);
168 r->iov.iov_len = len;
169 assert(r->iov.iov_len <= r->buflen);
170 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
171 }
172 }
173
174 qemu_iovec_init_external(&r->qiov, &r->iov, 1);
175 }
176
177 static void scsi_aio_complete(void *opaque, int ret)
178 {
179 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
180 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
181
182 assert(r->req.aiocb != NULL);
183 r->req.aiocb = NULL;
184 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
185 if (r->req.io_canceled) {
186 goto done;
187 }
188
189 if (ret < 0) {
190 if (scsi_handle_rw_error(r, -ret)) {
191 goto done;
192 }
193 }
194
195 scsi_req_complete(&r->req, GOOD);
196
197 done:
198 if (!r->req.io_canceled) {
199 scsi_req_unref(&r->req);
200 }
201 }
202
203 static bool scsi_is_cmd_fua(SCSICommand *cmd)
204 {
205 switch (cmd->buf[0]) {
206 case READ_10:
207 case READ_12:
208 case READ_16:
209 case WRITE_10:
210 case WRITE_12:
211 case WRITE_16:
212 return (cmd->buf[1] & 8) != 0;
213
214 case VERIFY_10:
215 case VERIFY_12:
216 case VERIFY_16:
217 case WRITE_VERIFY_10:
218 case WRITE_VERIFY_12:
219 case WRITE_VERIFY_16:
220 return true;
221
222 case READ_6:
223 case WRITE_6:
224 default:
225 return false;
226 }
227 }
228
229 static void scsi_write_do_fua(SCSIDiskReq *r)
230 {
231 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
232
233 if (r->req.io_canceled) {
234 goto done;
235 }
236
237 if (scsi_is_cmd_fua(&r->req.cmd)) {
238 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
239 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
240 return;
241 }
242
243 scsi_req_complete(&r->req, GOOD);
244
245 done:
246 if (!r->req.io_canceled) {
247 scsi_req_unref(&r->req);
248 }
249 }
250
251 static void scsi_dma_complete_noio(void *opaque, int ret)
252 {
253 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
254 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
255
256 if (r->req.aiocb != NULL) {
257 r->req.aiocb = NULL;
258 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
259 }
260 if (r->req.io_canceled) {
261 goto done;
262 }
263
264 if (ret < 0) {
265 if (scsi_handle_rw_error(r, -ret)) {
266 goto done;
267 }
268 }
269
270 r->sector += r->sector_count;
271 r->sector_count = 0;
272 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
273 scsi_write_do_fua(r);
274 return;
275 } else {
276 scsi_req_complete(&r->req, GOOD);
277 }
278
279 done:
280 if (!r->req.io_canceled) {
281 scsi_req_unref(&r->req);
282 }
283 }
284
285 static void scsi_dma_complete(void *opaque, int ret)
286 {
287 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
288
289 assert(r->req.aiocb != NULL);
290 scsi_dma_complete_noio(opaque, ret);
291 }
292
293 static void scsi_read_complete(void * opaque, int ret)
294 {
295 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
296 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
297 int n;
298
299 assert(r->req.aiocb != NULL);
300 r->req.aiocb = NULL;
301 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
302 if (r->req.io_canceled) {
303 goto done;
304 }
305
306 if (ret < 0) {
307 if (scsi_handle_rw_error(r, -ret)) {
308 goto done;
309 }
310 }
311
312 DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
313
314 n = r->qiov.size / 512;
315 r->sector += n;
316 r->sector_count -= n;
317 scsi_req_data(&r->req, r->qiov.size);
318
319 done:
320 if (!r->req.io_canceled) {
321 scsi_req_unref(&r->req);
322 }
323 }
324
325 /* Actually issue a read to the block device. */
326 static void scsi_do_read(void *opaque, int ret)
327 {
328 SCSIDiskReq *r = opaque;
329 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
330 uint32_t n;
331
332 if (r->req.aiocb != NULL) {
333 r->req.aiocb = NULL;
334 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
335 }
336 if (r->req.io_canceled) {
337 goto done;
338 }
339
340 if (ret < 0) {
341 if (scsi_handle_rw_error(r, -ret)) {
342 goto done;
343 }
344 }
345
346 /* The request is used as the AIO opaque value, so add a ref. */
347 scsi_req_ref(&r->req);
348
349 if (r->req.sg) {
350 dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_READ);
351 r->req.resid -= r->req.sg->size;
352 r->req.aiocb = dma_bdrv_read(s->qdev.conf.bs, r->req.sg, r->sector,
353 scsi_dma_complete, r);
354 } else {
355 n = scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
356 bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
357 r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
358 scsi_read_complete, r);
359 }
360
361 done:
362 if (!r->req.io_canceled) {
363 scsi_req_unref(&r->req);
364 }
365 }
366
367 /* Read more data from scsi device into buffer. */
368 static void scsi_read_data(SCSIRequest *req)
369 {
370 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
371 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
372 bool first;
373
374 DPRINTF("Read sector_count=%d\n", r->sector_count);
375 if (r->sector_count == 0) {
376 /* This also clears the sense buffer for REQUEST SENSE. */
377 scsi_req_complete(&r->req, GOOD);
378 return;
379 }
380
381 /* No data transfer may already be in progress */
382 assert(r->req.aiocb == NULL);
383
384 /* The request is used as the AIO opaque value, so add a ref. */
385 scsi_req_ref(&r->req);
386 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
387 DPRINTF("Data transfer direction invalid\n");
388 scsi_read_complete(r, -EINVAL);
389 return;
390 }
391
392 if (s->tray_open) {
393 scsi_read_complete(r, -ENOMEDIUM);
394 return;
395 }
396
397 first = !r->started;
398 r->started = true;
399 if (first && scsi_is_cmd_fua(&r->req.cmd)) {
400 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
401 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_do_read, r);
402 } else {
403 scsi_do_read(r, 0);
404 }
405 }
406
407 /*
408 * scsi_handle_rw_error has two return values. 0 means that the error
409 * must be ignored, 1 means that the error has been processed and the
410 * caller should not do anything else for this request. Note that
411 * scsi_handle_rw_error always manages its reference counts, independent
412 * of the return value.
413 */
414 static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
415 {
416 bool is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
417 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
418 BlockErrorAction action = bdrv_get_error_action(s->qdev.conf.bs, is_read, error);
419
420 if (action == BDRV_ACTION_REPORT) {
421 switch (error) {
422 case ENOMEDIUM:
423 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
424 break;
425 case ENOMEM:
426 scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
427 break;
428 case EINVAL:
429 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
430 break;
431 default:
432 scsi_check_condition(r, SENSE_CODE(IO_ERROR));
433 break;
434 }
435 }
436 bdrv_error_action(s->qdev.conf.bs, action, is_read, error);
437 if (action == BDRV_ACTION_STOP) {
438 scsi_req_retry(&r->req);
439 }
440 return action != BDRV_ACTION_IGNORE;
441 }
442
443 static void scsi_write_complete(void * opaque, int ret)
444 {
445 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
446 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
447 uint32_t n;
448
449 if (r->req.aiocb != NULL) {
450 r->req.aiocb = NULL;
451 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
452 }
453 if (r->req.io_canceled) {
454 goto done;
455 }
456
457 if (ret < 0) {
458 if (scsi_handle_rw_error(r, -ret)) {
459 goto done;
460 }
461 }
462
463 n = r->qiov.size / 512;
464 r->sector += n;
465 r->sector_count -= n;
466 if (r->sector_count == 0) {
467 scsi_write_do_fua(r);
468 return;
469 } else {
470 scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
471 DPRINTF("Write complete tag=0x%x more=%zd\n", r->req.tag, r->qiov.size);
472 scsi_req_data(&r->req, r->qiov.size);
473 }
474
475 done:
476 if (!r->req.io_canceled) {
477 scsi_req_unref(&r->req);
478 }
479 }
480
481 static void scsi_write_data(SCSIRequest *req)
482 {
483 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
484 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
485 uint32_t n;
486
487 /* No data transfer may already be in progress */
488 assert(r->req.aiocb == NULL);
489
490 /* The request is used as the AIO opaque value, so add a ref. */
491 scsi_req_ref(&r->req);
492 if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
493 DPRINTF("Data transfer direction invalid\n");
494 scsi_write_complete(r, -EINVAL);
495 return;
496 }
497
498 if (!r->req.sg && !r->qiov.size) {
499 /* Called for the first time. Ask the driver to send us more data. */
500 r->started = true;
501 scsi_write_complete(r, 0);
502 return;
503 }
504 if (s->tray_open) {
505 scsi_write_complete(r, -ENOMEDIUM);
506 return;
507 }
508
509 if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 ||
510 r->req.cmd.buf[0] == VERIFY_16) {
511 if (r->req.sg) {
512 scsi_dma_complete_noio(r, 0);
513 } else {
514 scsi_write_complete(r, 0);
515 }
516 return;
517 }
518
519 if (r->req.sg) {
520 dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_WRITE);
521 r->req.resid -= r->req.sg->size;
522 r->req.aiocb = dma_bdrv_write(s->qdev.conf.bs, r->req.sg, r->sector,
523 scsi_dma_complete, r);
524 } else {
525 n = r->qiov.size / 512;
526 bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
527 r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
528 scsi_write_complete, r);
529 }
530 }
531
532 /* Return a pointer to the data buffer. */
533 static uint8_t *scsi_get_buf(SCSIRequest *req)
534 {
535 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
536
537 return (uint8_t *)r->iov.iov_base;
538 }
539
540 static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
541 {
542 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
543 int buflen = 0;
544 int start;
545
546 if (req->cmd.buf[1] & 0x1) {
547 /* Vital product data */
548 uint8_t page_code = req->cmd.buf[2];
549
550 outbuf[buflen++] = s->qdev.type & 0x1f;
551 outbuf[buflen++] = page_code ; // this page
552 outbuf[buflen++] = 0x00;
553 outbuf[buflen++] = 0x00;
554 start = buflen;
555
556 switch (page_code) {
557 case 0x00: /* Supported page codes, mandatory */
558 {
559 DPRINTF("Inquiry EVPD[Supported pages] "
560 "buffer size %zd\n", req->cmd.xfer);
561 outbuf[buflen++] = 0x00; // list of supported pages (this page)
562 if (s->serial) {
563 outbuf[buflen++] = 0x80; // unit serial number
564 }
565 outbuf[buflen++] = 0x83; // device identification
566 if (s->qdev.type == TYPE_DISK) {
567 outbuf[buflen++] = 0xb0; // block limits
568 outbuf[buflen++] = 0xb2; // thin provisioning
569 }
570 break;
571 }
572 case 0x80: /* Device serial number, optional */
573 {
574 int l;
575
576 if (!s->serial) {
577 DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
578 return -1;
579 }
580
581 l = strlen(s->serial);
582 if (l > 20) {
583 l = 20;
584 }
585
586 DPRINTF("Inquiry EVPD[Serial number] "
587 "buffer size %zd\n", req->cmd.xfer);
588 memcpy(outbuf+buflen, s->serial, l);
589 buflen += l;
590 break;
591 }
592
593 case 0x83: /* Device identification page, mandatory */
594 {
595 const char *str = s->serial ?: bdrv_get_device_name(s->qdev.conf.bs);
596 int max_len = s->serial ? 20 : 255 - 8;
597 int id_len = strlen(str);
598
599 if (id_len > max_len) {
600 id_len = max_len;
601 }
602 DPRINTF("Inquiry EVPD[Device identification] "
603 "buffer size %zd\n", req->cmd.xfer);
604
605 outbuf[buflen++] = 0x2; // ASCII
606 outbuf[buflen++] = 0; // not officially assigned
607 outbuf[buflen++] = 0; // reserved
608 outbuf[buflen++] = id_len; // length of data following
609 memcpy(outbuf+buflen, str, id_len);
610 buflen += id_len;
611
612 if (s->wwn) {
613 outbuf[buflen++] = 0x1; // Binary
614 outbuf[buflen++] = 0x3; // NAA
615 outbuf[buflen++] = 0; // reserved
616 outbuf[buflen++] = 8;
617 stq_be_p(&outbuf[buflen], s->wwn);
618 buflen += 8;
619 }
620 break;
621 }
622 case 0xb0: /* block limits */
623 {
624 unsigned int unmap_sectors =
625 s->qdev.conf.discard_granularity / s->qdev.blocksize;
626 unsigned int min_io_size =
627 s->qdev.conf.min_io_size / s->qdev.blocksize;
628 unsigned int opt_io_size =
629 s->qdev.conf.opt_io_size / s->qdev.blocksize;
630 unsigned int max_unmap_sectors =
631 s->max_unmap_size / s->qdev.blocksize;
632
633 if (s->qdev.type == TYPE_ROM) {
634 DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
635 page_code);
636 return -1;
637 }
638 /* required VPD size with unmap support */
639 buflen = 0x40;
640 memset(outbuf + 4, 0, buflen - 4);
641
642 outbuf[4] = 0x1; /* wsnz */
643
644 /* optimal transfer length granularity */
645 outbuf[6] = (min_io_size >> 8) & 0xff;
646 outbuf[7] = min_io_size & 0xff;
647
648 /* optimal transfer length */
649 outbuf[12] = (opt_io_size >> 24) & 0xff;
650 outbuf[13] = (opt_io_size >> 16) & 0xff;
651 outbuf[14] = (opt_io_size >> 8) & 0xff;
652 outbuf[15] = opt_io_size & 0xff;
653
654 /* max unmap LBA count, default is 1GB */
655 outbuf[20] = (max_unmap_sectors >> 24) & 0xff;
656 outbuf[21] = (max_unmap_sectors >> 16) & 0xff;
657 outbuf[22] = (max_unmap_sectors >> 8) & 0xff;
658 outbuf[23] = max_unmap_sectors & 0xff;
659
660 /* max unmap descriptors, 255 fit in 4 kb with an 8-byte header. */
661 outbuf[24] = 0;
662 outbuf[25] = 0;
663 outbuf[26] = 0;
664 outbuf[27] = 255;
665
666 /* optimal unmap granularity */
667 outbuf[28] = (unmap_sectors >> 24) & 0xff;
668 outbuf[29] = (unmap_sectors >> 16) & 0xff;
669 outbuf[30] = (unmap_sectors >> 8) & 0xff;
670 outbuf[31] = unmap_sectors & 0xff;
671 break;
672 }
673 case 0xb2: /* thin provisioning */
674 {
675 buflen = 8;
676 outbuf[4] = 0;
677 outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */
678 outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1;
679 outbuf[7] = 0;
680 break;
681 }
682 default:
683 return -1;
684 }
685 /* done with EVPD */
686 assert(buflen - start <= 255);
687 outbuf[start - 1] = buflen - start;
688 return buflen;
689 }
690
691 /* Standard INQUIRY data */
692 if (req->cmd.buf[2] != 0) {
693 return -1;
694 }
695
696 /* PAGE CODE == 0 */
697 buflen = req->cmd.xfer;
698 if (buflen > SCSI_MAX_INQUIRY_LEN) {
699 buflen = SCSI_MAX_INQUIRY_LEN;
700 }
701
702 outbuf[0] = s->qdev.type & 0x1f;
703 outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0;
704
705 strpadcpy((char *) &outbuf[16], 16, s->product, ' ');
706 strpadcpy((char *) &outbuf[8], 8, s->vendor, ' ');
707
708 memset(&outbuf[32], 0, 4);
709 memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
710 /*
711 * We claim conformance to SPC-3, which is required for guests
712 * to ask for modern features like READ CAPACITY(16) or the
713 * block characteristics VPD page by default. Not all of SPC-3
714 * is actually implemented, but we're good enough.
715 */
716 outbuf[2] = 5;
717 outbuf[3] = 2 | 0x10; /* Format 2, HiSup */
718
719 if (buflen > 36) {
720 outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
721 } else {
722 /* If the allocation length of CDB is too small,
723 the additional length is not adjusted */
724 outbuf[4] = 36 - 5;
725 }
726
727 /* Sync data transfer and TCQ. */
728 outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
729 return buflen;
730 }
731
732 static inline bool media_is_dvd(SCSIDiskState *s)
733 {
734 uint64_t nb_sectors;
735 if (s->qdev.type != TYPE_ROM) {
736 return false;
737 }
738 if (!bdrv_is_inserted(s->qdev.conf.bs)) {
739 return false;
740 }
741 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
742 return nb_sectors > CD_MAX_SECTORS;
743 }
744
745 static inline bool media_is_cd(SCSIDiskState *s)
746 {
747 uint64_t nb_sectors;
748 if (s->qdev.type != TYPE_ROM) {
749 return false;
750 }
751 if (!bdrv_is_inserted(s->qdev.conf.bs)) {
752 return false;
753 }
754 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
755 return nb_sectors <= CD_MAX_SECTORS;
756 }
757
758 static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r,
759 uint8_t *outbuf)
760 {
761 uint8_t type = r->req.cmd.buf[1] & 7;
762
763 if (s->qdev.type != TYPE_ROM) {
764 return -1;
765 }
766
767 /* Types 1/2 are only defined for Blu-Ray. */
768 if (type != 0) {
769 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
770 return -1;
771 }
772
773 memset(outbuf, 0, 34);
774 outbuf[1] = 32;
775 outbuf[2] = 0xe; /* last session complete, disc finalized */
776 outbuf[3] = 1; /* first track on disc */
777 outbuf[4] = 1; /* # of sessions */
778 outbuf[5] = 1; /* first track of last session */
779 outbuf[6] = 1; /* last track of last session */
780 outbuf[7] = 0x20; /* unrestricted use */
781 outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */
782 /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
783 /* 12-23: not meaningful for CD-ROM or DVD-ROM */
784 /* 24-31: disc bar code */
785 /* 32: disc application code */
786 /* 33: number of OPC tables */
787
788 return 34;
789 }
790
791 static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
792 uint8_t *outbuf)
793 {
794 static const int rds_caps_size[5] = {
795 [0] = 2048 + 4,
796 [1] = 4 + 4,
797 [3] = 188 + 4,
798 [4] = 2048 + 4,
799 };
800
801 uint8_t media = r->req.cmd.buf[1];
802 uint8_t layer = r->req.cmd.buf[6];
803 uint8_t format = r->req.cmd.buf[7];
804 int size = -1;
805
806 if (s->qdev.type != TYPE_ROM) {
807 return -1;
808 }
809 if (media != 0) {
810 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
811 return -1;
812 }
813
814 if (format != 0xff) {
815 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
816 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
817 return -1;
818 }
819 if (media_is_cd(s)) {
820 scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
821 return -1;
822 }
823 if (format >= ARRAY_SIZE(rds_caps_size)) {
824 return -1;
825 }
826 size = rds_caps_size[format];
827 memset(outbuf, 0, size);
828 }
829
830 switch (format) {
831 case 0x00: {
832 /* Physical format information */
833 uint64_t nb_sectors;
834 if (layer != 0) {
835 goto fail;
836 }
837 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
838
839 outbuf[4] = 1; /* DVD-ROM, part version 1 */
840 outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
841 outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */
842 outbuf[7] = 0; /* default densities */
843
844 stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
845 stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
846 break;
847 }
848
849 case 0x01: /* DVD copyright information, all zeros */
850 break;
851
852 case 0x03: /* BCA information - invalid field for no BCA info */
853 return -1;
854
855 case 0x04: /* DVD disc manufacturing information, all zeros */
856 break;
857
858 case 0xff: { /* List capabilities */
859 int i;
860 size = 4;
861 for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
862 if (!rds_caps_size[i]) {
863 continue;
864 }
865 outbuf[size] = i;
866 outbuf[size + 1] = 0x40; /* Not writable, readable */
867 stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
868 size += 4;
869 }
870 break;
871 }
872
873 default:
874 return -1;
875 }
876
877 /* Size of buffer, not including 2 byte size field */
878 stw_be_p(outbuf, size - 2);
879 return size;
880
881 fail:
882 return -1;
883 }
884
885 static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
886 {
887 uint8_t event_code, media_status;
888
889 media_status = 0;
890 if (s->tray_open) {
891 media_status = MS_TRAY_OPEN;
892 } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
893 media_status = MS_MEDIA_PRESENT;
894 }
895
896 /* Event notification descriptor */
897 event_code = MEC_NO_CHANGE;
898 if (media_status != MS_TRAY_OPEN) {
899 if (s->media_event) {
900 event_code = MEC_NEW_MEDIA;
901 s->media_event = false;
902 } else if (s->eject_request) {
903 event_code = MEC_EJECT_REQUESTED;
904 s->eject_request = false;
905 }
906 }
907
908 outbuf[0] = event_code;
909 outbuf[1] = media_status;
910
911 /* These fields are reserved, just clear them. */
912 outbuf[2] = 0;
913 outbuf[3] = 0;
914 return 4;
915 }
916
917 static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
918 uint8_t *outbuf)
919 {
920 int size;
921 uint8_t *buf = r->req.cmd.buf;
922 uint8_t notification_class_request = buf[4];
923 if (s->qdev.type != TYPE_ROM) {
924 return -1;
925 }
926 if ((buf[1] & 1) == 0) {
927 /* asynchronous */
928 return -1;
929 }
930
931 size = 4;
932 outbuf[0] = outbuf[1] = 0;
933 outbuf[3] = 1 << GESN_MEDIA; /* supported events */
934 if (notification_class_request & (1 << GESN_MEDIA)) {
935 outbuf[2] = GESN_MEDIA;
936 size += scsi_event_status_media(s, &outbuf[size]);
937 } else {
938 outbuf[2] = 0x80;
939 }
940 stw_be_p(outbuf, size - 4);
941 return size;
942 }
943
944 static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
945 {
946 int current;
947
948 if (s->qdev.type != TYPE_ROM) {
949 return -1;
950 }
951 current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
952 memset(outbuf, 0, 40);
953 stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
954 stw_be_p(&outbuf[6], current);
955 /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
956 outbuf[10] = 0x03; /* persistent, current */
957 outbuf[11] = 8; /* two profiles */
958 stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
959 outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
960 stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
961 outbuf[18] = (current == MMC_PROFILE_CD_ROM);
962 /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
963 stw_be_p(&outbuf[20], 1);
964 outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
965 outbuf[23] = 8;
966 stl_be_p(&outbuf[24], 1); /* SCSI */
967 outbuf[28] = 1; /* DBE = 1, mandatory */
968 /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
969 stw_be_p(&outbuf[32], 3);
970 outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
971 outbuf[35] = 4;
972 outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
973 /* TODO: Random readable, CD read, DVD read, drive serial number,
974 power management */
975 return 40;
976 }
977
978 static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
979 {
980 if (s->qdev.type != TYPE_ROM) {
981 return -1;
982 }
983 memset(outbuf, 0, 8);
984 outbuf[5] = 1; /* CD-ROM */
985 return 8;
986 }
987
988 static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
989 int page_control)
990 {
991 static const int mode_sense_valid[0x3f] = {
992 [MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
993 [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
994 [MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
995 [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
996 [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM),
997 [MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
998 };
999
1000 uint8_t *p = *p_outbuf + 2;
1001 int length;
1002
1003 if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
1004 return -1;
1005 }
1006
1007 /*
1008 * If Changeable Values are requested, a mask denoting those mode parameters
1009 * that are changeable shall be returned. As we currently don't support
1010 * parameter changes via MODE_SELECT all bits are returned set to zero.
1011 * The buffer was already menset to zero by the caller of this function.
1012 *
1013 * The offsets here are off by two compared to the descriptions in the
1014 * SCSI specs, because those include a 2-byte header. This is unfortunate,
1015 * but it is done so that offsets are consistent within our implementation
1016 * of MODE SENSE and MODE SELECT. MODE SELECT has to deal with both
1017 * 2-byte and 4-byte headers.
1018 */
1019 switch (page) {
1020 case MODE_PAGE_HD_GEOMETRY:
1021 length = 0x16;
1022 if (page_control == 1) { /* Changeable Values */
1023 break;
1024 }
1025 /* if a geometry hint is available, use it */
1026 p[0] = (s->qdev.conf.cyls >> 16) & 0xff;
1027 p[1] = (s->qdev.conf.cyls >> 8) & 0xff;
1028 p[2] = s->qdev.conf.cyls & 0xff;
1029 p[3] = s->qdev.conf.heads & 0xff;
1030 /* Write precomp start cylinder, disabled */
1031 p[4] = (s->qdev.conf.cyls >> 16) & 0xff;
1032 p[5] = (s->qdev.conf.cyls >> 8) & 0xff;
1033 p[6] = s->qdev.conf.cyls & 0xff;
1034 /* Reduced current start cylinder, disabled */
1035 p[7] = (s->qdev.conf.cyls >> 16) & 0xff;
1036 p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
1037 p[9] = s->qdev.conf.cyls & 0xff;
1038 /* Device step rate [ns], 200ns */
1039 p[10] = 0;
1040 p[11] = 200;
1041 /* Landing zone cylinder */
1042 p[12] = 0xff;
1043 p[13] = 0xff;
1044 p[14] = 0xff;
1045 /* Medium rotation rate [rpm], 5400 rpm */
1046 p[18] = (5400 >> 8) & 0xff;
1047 p[19] = 5400 & 0xff;
1048 break;
1049
1050 case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
1051 length = 0x1e;
1052 if (page_control == 1) { /* Changeable Values */
1053 break;
1054 }
1055 /* Transfer rate [kbit/s], 5Mbit/s */
1056 p[0] = 5000 >> 8;
1057 p[1] = 5000 & 0xff;
1058 /* if a geometry hint is available, use it */
1059 p[2] = s->qdev.conf.heads & 0xff;
1060 p[3] = s->qdev.conf.secs & 0xff;
1061 p[4] = s->qdev.blocksize >> 8;
1062 p[6] = (s->qdev.conf.cyls >> 8) & 0xff;
1063 p[7] = s->qdev.conf.cyls & 0xff;
1064 /* Write precomp start cylinder, disabled */
1065 p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
1066 p[9] = s->qdev.conf.cyls & 0xff;
1067 /* Reduced current start cylinder, disabled */
1068 p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
1069 p[11] = s->qdev.conf.cyls & 0xff;
1070 /* Device step rate [100us], 100us */
1071 p[12] = 0;
1072 p[13] = 1;
1073 /* Device step pulse width [us], 1us */
1074 p[14] = 1;
1075 /* Device head settle delay [100us], 100us */
1076 p[15] = 0;
1077 p[16] = 1;
1078 /* Motor on delay [0.1s], 0.1s */
1079 p[17] = 1;
1080 /* Motor off delay [0.1s], 0.1s */
1081 p[18] = 1;
1082 /* Medium rotation rate [rpm], 5400 rpm */
1083 p[26] = (5400 >> 8) & 0xff;
1084 p[27] = 5400 & 0xff;
1085 break;
1086
1087 case MODE_PAGE_CACHING:
1088 length = 0x12;
1089 if (page_control == 1 || /* Changeable Values */
1090 bdrv_enable_write_cache(s->qdev.conf.bs)) {
1091 p[0] = 4; /* WCE */
1092 }
1093 break;
1094
1095 case MODE_PAGE_R_W_ERROR:
1096 length = 10;
1097 if (page_control == 1) { /* Changeable Values */
1098 break;
1099 }
1100 p[0] = 0x80; /* Automatic Write Reallocation Enabled */
1101 if (s->qdev.type == TYPE_ROM) {
1102 p[1] = 0x20; /* Read Retry Count */
1103 }
1104 break;
1105
1106 case MODE_PAGE_AUDIO_CTL:
1107 length = 14;
1108 break;
1109
1110 case MODE_PAGE_CAPABILITIES:
1111 length = 0x14;
1112 if (page_control == 1) { /* Changeable Values */
1113 break;
1114 }
1115
1116 p[0] = 0x3b; /* CD-R & CD-RW read */
1117 p[1] = 0; /* Writing not supported */
1118 p[2] = 0x7f; /* Audio, composite, digital out,
1119 mode 2 form 1&2, multi session */
1120 p[3] = 0xff; /* CD DA, DA accurate, RW supported,
1121 RW corrected, C2 errors, ISRC,
1122 UPC, Bar code */
1123 p[4] = 0x2d | (s->tray_locked ? 2 : 0);
1124 /* Locking supported, jumper present, eject, tray */
1125 p[5] = 0; /* no volume & mute control, no
1126 changer */
1127 p[6] = (50 * 176) >> 8; /* 50x read speed */
1128 p[7] = (50 * 176) & 0xff;
1129 p[8] = 2 >> 8; /* Two volume levels */
1130 p[9] = 2 & 0xff;
1131 p[10] = 2048 >> 8; /* 2M buffer */
1132 p[11] = 2048 & 0xff;
1133 p[12] = (16 * 176) >> 8; /* 16x read speed current */
1134 p[13] = (16 * 176) & 0xff;
1135 p[16] = (16 * 176) >> 8; /* 16x write speed */
1136 p[17] = (16 * 176) & 0xff;
1137 p[18] = (16 * 176) >> 8; /* 16x write speed current */
1138 p[19] = (16 * 176) & 0xff;
1139 break;
1140
1141 default:
1142 return -1;
1143 }
1144
1145 assert(length < 256);
1146 (*p_outbuf)[0] = page;
1147 (*p_outbuf)[1] = length;
1148 *p_outbuf += length + 2;
1149 return length + 2;
1150 }
1151
1152 static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
1153 {
1154 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1155 uint64_t nb_sectors;
1156 bool dbd;
1157 int page, buflen, ret, page_control;
1158 uint8_t *p;
1159 uint8_t dev_specific_param;
1160
1161 dbd = (r->req.cmd.buf[1] & 0x8) != 0;
1162 page = r->req.cmd.buf[2] & 0x3f;
1163 page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
1164 DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
1165 (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
1166 memset(outbuf, 0, r->req.cmd.xfer);
1167 p = outbuf;
1168
1169 if (s->qdev.type == TYPE_DISK) {
1170 dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0;
1171 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1172 dev_specific_param |= 0x80; /* Readonly. */
1173 }
1174 } else {
1175 /* MMC prescribes that CD/DVD drives have no block descriptors,
1176 * and defines no device-specific parameter. */
1177 dev_specific_param = 0x00;
1178 dbd = true;
1179 }
1180
1181 if (r->req.cmd.buf[0] == MODE_SENSE) {
1182 p[1] = 0; /* Default media type. */
1183 p[2] = dev_specific_param;
1184 p[3] = 0; /* Block descriptor length. */
1185 p += 4;
1186 } else { /* MODE_SENSE_10 */
1187 p[2] = 0; /* Default media type. */
1188 p[3] = dev_specific_param;
1189 p[6] = p[7] = 0; /* Block descriptor length. */
1190 p += 8;
1191 }
1192
1193 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1194 if (!dbd && nb_sectors) {
1195 if (r->req.cmd.buf[0] == MODE_SENSE) {
1196 outbuf[3] = 8; /* Block descriptor length */
1197 } else { /* MODE_SENSE_10 */
1198 outbuf[7] = 8; /* Block descriptor length */
1199 }
1200 nb_sectors /= (s->qdev.blocksize / 512);
1201 if (nb_sectors > 0xffffff) {
1202 nb_sectors = 0;
1203 }
1204 p[0] = 0; /* media density code */
1205 p[1] = (nb_sectors >> 16) & 0xff;
1206 p[2] = (nb_sectors >> 8) & 0xff;
1207 p[3] = nb_sectors & 0xff;
1208 p[4] = 0; /* reserved */
1209 p[5] = 0; /* bytes 5-7 are the sector size in bytes */
1210 p[6] = s->qdev.blocksize >> 8;
1211 p[7] = 0;
1212 p += 8;
1213 }
1214
1215 if (page_control == 3) {
1216 /* Saved Values */
1217 scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
1218 return -1;
1219 }
1220
1221 if (page == 0x3f) {
1222 for (page = 0; page <= 0x3e; page++) {
1223 mode_sense_page(s, page, &p, page_control);
1224 }
1225 } else {
1226 ret = mode_sense_page(s, page, &p, page_control);
1227 if (ret == -1) {
1228 return -1;
1229 }
1230 }
1231
1232 buflen = p - outbuf;
1233 /*
1234 * The mode data length field specifies the length in bytes of the
1235 * following data that is available to be transferred. The mode data
1236 * length does not include itself.
1237 */
1238 if (r->req.cmd.buf[0] == MODE_SENSE) {
1239 outbuf[0] = buflen - 1;
1240 } else { /* MODE_SENSE_10 */
1241 outbuf[0] = ((buflen - 2) >> 8) & 0xff;
1242 outbuf[1] = (buflen - 2) & 0xff;
1243 }
1244 return buflen;
1245 }
1246
1247 static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
1248 {
1249 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1250 int start_track, format, msf, toclen;
1251 uint64_t nb_sectors;
1252
1253 msf = req->cmd.buf[1] & 2;
1254 format = req->cmd.buf[2] & 0xf;
1255 start_track = req->cmd.buf[6];
1256 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1257 DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
1258 nb_sectors /= s->qdev.blocksize / 512;
1259 switch (format) {
1260 case 0:
1261 toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
1262 break;
1263 case 1:
1264 /* multi session : only a single session defined */
1265 toclen = 12;
1266 memset(outbuf, 0, 12);
1267 outbuf[1] = 0x0a;
1268 outbuf[2] = 0x01;
1269 outbuf[3] = 0x01;
1270 break;
1271 case 2:
1272 toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
1273 break;
1274 default:
1275 return -1;
1276 }
1277 return toclen;
1278 }
1279
1280 static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1281 {
1282 SCSIRequest *req = &r->req;
1283 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1284 bool start = req->cmd.buf[4] & 1;
1285 bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */
1286 int pwrcnd = req->cmd.buf[4] & 0xf0;
1287
1288 if (pwrcnd) {
1289 /* eject/load only happens for power condition == 0 */
1290 return 0;
1291 }
1292
1293 if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) {
1294 if (!start && !s->tray_open && s->tray_locked) {
1295 scsi_check_condition(r,
1296 bdrv_is_inserted(s->qdev.conf.bs)
1297 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
1298 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
1299 return -1;
1300 }
1301
1302 if (s->tray_open != !start) {
1303 bdrv_eject(s->qdev.conf.bs, !start);
1304 s->tray_open = !start;
1305 }
1306 }
1307 return 0;
1308 }
1309
1310 static void scsi_disk_emulate_read_data(SCSIRequest *req)
1311 {
1312 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1313 int buflen = r->iov.iov_len;
1314
1315 if (buflen) {
1316 DPRINTF("Read buf_len=%d\n", buflen);
1317 r->iov.iov_len = 0;
1318 r->started = true;
1319 scsi_req_data(&r->req, buflen);
1320 return;
1321 }
1322
1323 /* This also clears the sense buffer for REQUEST SENSE. */
1324 scsi_req_complete(&r->req, GOOD);
1325 }
1326
1327 static int scsi_disk_check_mode_select(SCSIDiskState *s, int page,
1328 uint8_t *inbuf, int inlen)
1329 {
1330 uint8_t mode_current[SCSI_MAX_MODE_LEN];
1331 uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
1332 uint8_t *p;
1333 int len, expected_len, changeable_len, i;
1334
1335 /* The input buffer does not include the page header, so it is
1336 * off by 2 bytes.
1337 */
1338 expected_len = inlen + 2;
1339 if (expected_len > SCSI_MAX_MODE_LEN) {
1340 return -1;
1341 }
1342
1343 p = mode_current;
1344 memset(mode_current, 0, inlen + 2);
1345 len = mode_sense_page(s, page, &p, 0);
1346 if (len < 0 || len != expected_len) {
1347 return -1;
1348 }
1349
1350 p = mode_changeable;
1351 memset(mode_changeable, 0, inlen + 2);
1352 changeable_len = mode_sense_page(s, page, &p, 1);
1353 assert(changeable_len == len);
1354
1355 /* Check that unchangeable bits are the same as what MODE SENSE
1356 * would return.
1357 */
1358 for (i = 2; i < len; i++) {
1359 if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
1360 return -1;
1361 }
1362 }
1363 return 0;
1364 }
1365
1366 static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p)
1367 {
1368 switch (page) {
1369 case MODE_PAGE_CACHING:
1370 bdrv_set_enable_write_cache(s->qdev.conf.bs, (p[0] & 4) != 0);
1371 break;
1372
1373 default:
1374 break;
1375 }
1376 }
1377
1378 static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change)
1379 {
1380 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1381
1382 while (len > 0) {
1383 int page, subpage, page_len;
1384
1385 /* Parse both possible formats for the mode page headers. */
1386 page = p[0] & 0x3f;
1387 if (p[0] & 0x40) {
1388 if (len < 4) {
1389 goto invalid_param_len;
1390 }
1391 subpage = p[1];
1392 page_len = lduw_be_p(&p[2]);
1393 p += 4;
1394 len -= 4;
1395 } else {
1396 if (len < 2) {
1397 goto invalid_param_len;
1398 }
1399 subpage = 0;
1400 page_len = p[1];
1401 p += 2;
1402 len -= 2;
1403 }
1404
1405 if (subpage) {
1406 goto invalid_param;
1407 }
1408 if (page_len > len) {
1409 goto invalid_param_len;
1410 }
1411
1412 if (!change) {
1413 if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) {
1414 goto invalid_param;
1415 }
1416 } else {
1417 scsi_disk_apply_mode_select(s, page, p);
1418 }
1419
1420 p += page_len;
1421 len -= page_len;
1422 }
1423 return 0;
1424
1425 invalid_param:
1426 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
1427 return -1;
1428
1429 invalid_param_len:
1430 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1431 return -1;
1432 }
1433
1434 static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf)
1435 {
1436 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1437 uint8_t *p = inbuf;
1438 int cmd = r->req.cmd.buf[0];
1439 int len = r->req.cmd.xfer;
1440 int hdr_len = (cmd == MODE_SELECT ? 4 : 8);
1441 int bd_len;
1442 int pass;
1443
1444 /* We only support PF=1, SP=0. */
1445 if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
1446 goto invalid_field;
1447 }
1448
1449 if (len < hdr_len) {
1450 goto invalid_param_len;
1451 }
1452
1453 bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6]));
1454 len -= hdr_len;
1455 p += hdr_len;
1456 if (len < bd_len) {
1457 goto invalid_param_len;
1458 }
1459 if (bd_len != 0 && bd_len != 8) {
1460 goto invalid_param;
1461 }
1462
1463 len -= bd_len;
1464 p += bd_len;
1465
1466 /* Ensure no change is made if there is an error! */
1467 for (pass = 0; pass < 2; pass++) {
1468 if (mode_select_pages(r, p, len, pass == 1) < 0) {
1469 assert(pass == 0);
1470 return;
1471 }
1472 }
1473 if (!bdrv_enable_write_cache(s->qdev.conf.bs)) {
1474 /* The request is used as the AIO opaque value, so add a ref. */
1475 scsi_req_ref(&r->req);
1476 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
1477 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
1478 return;
1479 }
1480
1481 scsi_req_complete(&r->req, GOOD);
1482 return;
1483
1484 invalid_param:
1485 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
1486 return;
1487
1488 invalid_param_len:
1489 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1490 return;
1491
1492 invalid_field:
1493 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1494 }
1495
1496 static inline bool check_lba_range(SCSIDiskState *s,
1497 uint64_t sector_num, uint32_t nb_sectors)
1498 {
1499 /*
1500 * The first line tests that no overflow happens when computing the last
1501 * sector. The second line tests that the last accessed sector is in
1502 * range.
1503 *
1504 * Careful, the computations should not underflow for nb_sectors == 0,
1505 * and a 0-block read to the first LBA beyond the end of device is
1506 * valid.
1507 */
1508 return (sector_num <= sector_num + nb_sectors &&
1509 sector_num + nb_sectors <= s->qdev.max_lba + 1);
1510 }
1511
1512 typedef struct UnmapCBData {
1513 SCSIDiskReq *r;
1514 uint8_t *inbuf;
1515 int count;
1516 } UnmapCBData;
1517
1518 static void scsi_unmap_complete(void *opaque, int ret)
1519 {
1520 UnmapCBData *data = opaque;
1521 SCSIDiskReq *r = data->r;
1522 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1523 uint64_t sector_num;
1524 uint32_t nb_sectors;
1525
1526 r->req.aiocb = NULL;
1527 if (r->req.io_canceled) {
1528 goto done;
1529 }
1530
1531 if (ret < 0) {
1532 if (scsi_handle_rw_error(r, -ret)) {
1533 goto done;
1534 }
1535 }
1536
1537 if (data->count > 0) {
1538 sector_num = ldq_be_p(&data->inbuf[0]);
1539 nb_sectors = ldl_be_p(&data->inbuf[8]) & 0xffffffffULL;
1540 if (!check_lba_range(s, sector_num, nb_sectors)) {
1541 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1542 goto done;
1543 }
1544
1545 r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
1546 sector_num * (s->qdev.blocksize / 512),
1547 nb_sectors * (s->qdev.blocksize / 512),
1548 scsi_unmap_complete, data);
1549 data->count--;
1550 data->inbuf += 16;
1551 return;
1552 }
1553
1554 scsi_req_complete(&r->req, GOOD);
1555
1556 done:
1557 if (!r->req.io_canceled) {
1558 scsi_req_unref(&r->req);
1559 }
1560 g_free(data);
1561 }
1562
1563 static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf)
1564 {
1565 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1566 uint8_t *p = inbuf;
1567 int len = r->req.cmd.xfer;
1568 UnmapCBData *data;
1569
1570 /* Reject ANCHOR=1. */
1571 if (r->req.cmd.buf[1] & 0x1) {
1572 goto invalid_field;
1573 }
1574
1575 if (len < 8) {
1576 goto invalid_param_len;
1577 }
1578 if (len < lduw_be_p(&p[0]) + 2) {
1579 goto invalid_param_len;
1580 }
1581 if (len < lduw_be_p(&p[2]) + 8) {
1582 goto invalid_param_len;
1583 }
1584 if (lduw_be_p(&p[2]) & 15) {
1585 goto invalid_param_len;
1586 }
1587
1588 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1589 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
1590 return;
1591 }
1592
1593 data = g_new0(UnmapCBData, 1);
1594 data->r = r;
1595 data->inbuf = &p[8];
1596 data->count = lduw_be_p(&p[2]) >> 4;
1597
1598 /* The matching unref is in scsi_unmap_complete, before data is freed. */
1599 scsi_req_ref(&r->req);
1600 scsi_unmap_complete(data, 0);
1601 return;
1602
1603 invalid_param_len:
1604 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1605 return;
1606
1607 invalid_field:
1608 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1609 }
1610
1611 typedef struct WriteSameCBData {
1612 SCSIDiskReq *r;
1613 int64_t sector;
1614 int nb_sectors;
1615 QEMUIOVector qiov;
1616 struct iovec iov;
1617 } WriteSameCBData;
1618
1619 static void scsi_write_same_complete(void *opaque, int ret)
1620 {
1621 WriteSameCBData *data = opaque;
1622 SCSIDiskReq *r = data->r;
1623 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1624
1625 assert(r->req.aiocb != NULL);
1626 r->req.aiocb = NULL;
1627 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
1628 if (r->req.io_canceled) {
1629 goto done;
1630 }
1631
1632 if (ret < 0) {
1633 if (scsi_handle_rw_error(r, -ret)) {
1634 goto done;
1635 }
1636 }
1637
1638 data->nb_sectors -= data->iov.iov_len / 512;
1639 data->sector += data->iov.iov_len / 512;
1640 data->iov.iov_len = MIN(data->nb_sectors * 512, data->iov.iov_len);
1641 if (data->iov.iov_len) {
1642 bdrv_acct_start(s->qdev.conf.bs, &r->acct, data->iov.iov_len, BDRV_ACCT_WRITE);
1643 r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, data->sector,
1644 &data->qiov, data->iov.iov_len / 512,
1645 scsi_write_same_complete, data);
1646 return;
1647 }
1648
1649 scsi_req_complete(&r->req, GOOD);
1650
1651 done:
1652 if (!r->req.io_canceled) {
1653 scsi_req_unref(&r->req);
1654 }
1655 qemu_vfree(data->iov.iov_base);
1656 g_free(data);
1657 }
1658
1659 static void scsi_disk_emulate_write_same(SCSIDiskReq *r, uint8_t *inbuf)
1660 {
1661 SCSIRequest *req = &r->req;
1662 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1663 uint32_t nb_sectors = scsi_data_cdb_length(r->req.cmd.buf);
1664 WriteSameCBData *data;
1665 uint8_t *buf;
1666 int i;
1667
1668 /* Fail if PBDATA=1 or LBDATA=1 or ANCHOR=1. */
1669 if (nb_sectors == 0 || (req->cmd.buf[1] & 0x16)) {
1670 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1671 return;
1672 }
1673
1674 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1675 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
1676 return;
1677 }
1678 if (!check_lba_range(s, r->req.cmd.lba, nb_sectors)) {
1679 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1680 return;
1681 }
1682
1683 if (buffer_is_zero(inbuf, s->qdev.blocksize)) {
1684 int flags = (req->cmd.buf[1] & 0x8) ? BDRV_REQ_MAY_UNMAP : 0;
1685
1686 /* The request is used as the AIO opaque value, so add a ref. */
1687 scsi_req_ref(&r->req);
1688 bdrv_acct_start(s->qdev.conf.bs, &r->acct, nb_sectors * s->qdev.blocksize,
1689 BDRV_ACCT_WRITE);
1690 r->req.aiocb = bdrv_aio_write_zeroes(s->qdev.conf.bs,
1691 r->req.cmd.lba * (s->qdev.blocksize / 512),
1692 nb_sectors * (s->qdev.blocksize / 512),
1693 flags, scsi_aio_complete, r);
1694 return;
1695 }
1696
1697 data = g_new0(WriteSameCBData, 1);
1698 data->r = r;
1699 data->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
1700 data->nb_sectors = nb_sectors * (s->qdev.blocksize / 512);
1701 data->iov.iov_len = MIN(data->nb_sectors * 512, SCSI_WRITE_SAME_MAX);
1702 data->iov.iov_base = buf = qemu_blockalign(s->qdev.conf.bs, data->iov.iov_len);
1703 qemu_iovec_init_external(&data->qiov, &data->iov, 1);
1704
1705 for (i = 0; i < data->iov.iov_len; i += s->qdev.blocksize) {
1706 memcpy(&buf[i], inbuf, s->qdev.blocksize);
1707 }
1708
1709 scsi_req_ref(&r->req);
1710 bdrv_acct_start(s->qdev.conf.bs, &r->acct, data->iov.iov_len, BDRV_ACCT_WRITE);
1711 r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, data->sector,
1712 &data->qiov, data->iov.iov_len / 512,
1713 scsi_write_same_complete, data);
1714 }
1715
1716 static void scsi_disk_emulate_write_data(SCSIRequest *req)
1717 {
1718 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1719
1720 if (r->iov.iov_len) {
1721 int buflen = r->iov.iov_len;
1722 DPRINTF("Write buf_len=%d\n", buflen);
1723 r->iov.iov_len = 0;
1724 scsi_req_data(&r->req, buflen);
1725 return;
1726 }
1727
1728 switch (req->cmd.buf[0]) {
1729 case MODE_SELECT:
1730 case MODE_SELECT_10:
1731 /* This also clears the sense buffer for REQUEST SENSE. */
1732 scsi_disk_emulate_mode_select(r, r->iov.iov_base);
1733 break;
1734
1735 case UNMAP:
1736 scsi_disk_emulate_unmap(r, r->iov.iov_base);
1737 break;
1738
1739 case VERIFY_10:
1740 case VERIFY_12:
1741 case VERIFY_16:
1742 if (r->req.status == -1) {
1743 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1744 }
1745 break;
1746
1747 case WRITE_SAME_10:
1748 case WRITE_SAME_16:
1749 scsi_disk_emulate_write_same(r, r->iov.iov_base);
1750 break;
1751
1752 default:
1753 abort();
1754 }
1755 }
1756
1757 static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf)
1758 {
1759 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1760 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1761 uint64_t nb_sectors;
1762 uint8_t *outbuf;
1763 int buflen;
1764
1765 switch (req->cmd.buf[0]) {
1766 case INQUIRY:
1767 case MODE_SENSE:
1768 case MODE_SENSE_10:
1769 case RESERVE:
1770 case RESERVE_10:
1771 case RELEASE:
1772 case RELEASE_10:
1773 case START_STOP:
1774 case ALLOW_MEDIUM_REMOVAL:
1775 case GET_CONFIGURATION:
1776 case GET_EVENT_STATUS_NOTIFICATION:
1777 case MECHANISM_STATUS:
1778 case REQUEST_SENSE:
1779 break;
1780
1781 default:
1782 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1783 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1784 return 0;
1785 }
1786 break;
1787 }
1788
1789 /*
1790 * FIXME: we shouldn't return anything bigger than 4k, but the code
1791 * requires the buffer to be as big as req->cmd.xfer in several
1792 * places. So, do not allow CDBs with a very large ALLOCATION
1793 * LENGTH. The real fix would be to modify scsi_read_data and
1794 * dma_buf_read, so that they return data beyond the buflen
1795 * as all zeros.
1796 */
1797 if (req->cmd.xfer > 65536) {
1798 goto illegal_request;
1799 }
1800 r->buflen = MAX(4096, req->cmd.xfer);
1801
1802 if (!r->iov.iov_base) {
1803 r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
1804 }
1805
1806 buflen = req->cmd.xfer;
1807 outbuf = r->iov.iov_base;
1808 memset(outbuf, 0, r->buflen);
1809 switch (req->cmd.buf[0]) {
1810 case TEST_UNIT_READY:
1811 assert(!s->tray_open && bdrv_is_inserted(s->qdev.conf.bs));
1812 break;
1813 case INQUIRY:
1814 buflen = scsi_disk_emulate_inquiry(req, outbuf);
1815 if (buflen < 0) {
1816 goto illegal_request;
1817 }
1818 break;
1819 case MODE_SENSE:
1820 case MODE_SENSE_10:
1821 buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1822 if (buflen < 0) {
1823 goto illegal_request;
1824 }
1825 break;
1826 case READ_TOC:
1827 buflen = scsi_disk_emulate_read_toc(req, outbuf);
1828 if (buflen < 0) {
1829 goto illegal_request;
1830 }
1831 break;
1832 case RESERVE:
1833 if (req->cmd.buf[1] & 1) {
1834 goto illegal_request;
1835 }
1836 break;
1837 case RESERVE_10:
1838 if (req->cmd.buf[1] & 3) {
1839 goto illegal_request;
1840 }
1841 break;
1842 case RELEASE:
1843 if (req->cmd.buf[1] & 1) {
1844 goto illegal_request;
1845 }
1846 break;
1847 case RELEASE_10:
1848 if (req->cmd.buf[1] & 3) {
1849 goto illegal_request;
1850 }
1851 break;
1852 case START_STOP:
1853 if (scsi_disk_emulate_start_stop(r) < 0) {
1854 return 0;
1855 }
1856 break;
1857 case ALLOW_MEDIUM_REMOVAL:
1858 s->tray_locked = req->cmd.buf[4] & 1;
1859 bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
1860 break;
1861 case READ_CAPACITY_10:
1862 /* The normal LEN field for this command is zero. */
1863 memset(outbuf, 0, 8);
1864 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1865 if (!nb_sectors) {
1866 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1867 return 0;
1868 }
1869 if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
1870 goto illegal_request;
1871 }
1872 nb_sectors /= s->qdev.blocksize / 512;
1873 /* Returned value is the address of the last sector. */
1874 nb_sectors--;
1875 /* Remember the new size for read/write sanity checking. */
1876 s->qdev.max_lba = nb_sectors;
1877 /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1878 if (nb_sectors > UINT32_MAX) {
1879 nb_sectors = UINT32_MAX;
1880 }
1881 outbuf[0] = (nb_sectors >> 24) & 0xff;
1882 outbuf[1] = (nb_sectors >> 16) & 0xff;
1883 outbuf[2] = (nb_sectors >> 8) & 0xff;
1884 outbuf[3] = nb_sectors & 0xff;
1885 outbuf[4] = 0;
1886 outbuf[5] = 0;
1887 outbuf[6] = s->qdev.blocksize >> 8;
1888 outbuf[7] = 0;
1889 break;
1890 case REQUEST_SENSE:
1891 /* Just return "NO SENSE". */
1892 buflen = scsi_build_sense(NULL, 0, outbuf, r->buflen,
1893 (req->cmd.buf[1] & 1) == 0);
1894 if (buflen < 0) {
1895 goto illegal_request;
1896 }
1897 break;
1898 case MECHANISM_STATUS:
1899 buflen = scsi_emulate_mechanism_status(s, outbuf);
1900 if (buflen < 0) {
1901 goto illegal_request;
1902 }
1903 break;
1904 case GET_CONFIGURATION:
1905 buflen = scsi_get_configuration(s, outbuf);
1906 if (buflen < 0) {
1907 goto illegal_request;
1908 }
1909 break;
1910 case GET_EVENT_STATUS_NOTIFICATION:
1911 buflen = scsi_get_event_status_notification(s, r, outbuf);
1912 if (buflen < 0) {
1913 goto illegal_request;
1914 }
1915 break;
1916 case READ_DISC_INFORMATION:
1917 buflen = scsi_read_disc_information(s, r, outbuf);
1918 if (buflen < 0) {
1919 goto illegal_request;
1920 }
1921 break;
1922 case READ_DVD_STRUCTURE:
1923 buflen = scsi_read_dvd_structure(s, r, outbuf);
1924 if (buflen < 0) {
1925 goto illegal_request;
1926 }
1927 break;
1928 case SERVICE_ACTION_IN_16:
1929 /* Service Action In subcommands. */
1930 if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1931 DPRINTF("SAI READ CAPACITY(16)\n");
1932 memset(outbuf, 0, req->cmd.xfer);
1933 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1934 if (!nb_sectors) {
1935 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1936 return 0;
1937 }
1938 if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
1939 goto illegal_request;
1940 }
1941 nb_sectors /= s->qdev.blocksize / 512;
1942 /* Returned value is the address of the last sector. */
1943 nb_sectors--;
1944 /* Remember the new size for read/write sanity checking. */
1945 s->qdev.max_lba = nb_sectors;
1946 outbuf[0] = (nb_sectors >> 56) & 0xff;
1947 outbuf[1] = (nb_sectors >> 48) & 0xff;
1948 outbuf[2] = (nb_sectors >> 40) & 0xff;
1949 outbuf[3] = (nb_sectors >> 32) & 0xff;
1950 outbuf[4] = (nb_sectors >> 24) & 0xff;
1951 outbuf[5] = (nb_sectors >> 16) & 0xff;
1952 outbuf[6] = (nb_sectors >> 8) & 0xff;
1953 outbuf[7] = nb_sectors & 0xff;
1954 outbuf[8] = 0;
1955 outbuf[9] = 0;
1956 outbuf[10] = s->qdev.blocksize >> 8;
1957 outbuf[11] = 0;
1958 outbuf[12] = 0;
1959 outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1960
1961 /* set TPE bit if the format supports discard */
1962 if (s->qdev.conf.discard_granularity) {
1963 outbuf[14] = 0x80;
1964 }
1965
1966 /* Protection, exponent and lowest lba field left blank. */
1967 break;
1968 }
1969 DPRINTF("Unsupported Service Action In\n");
1970 goto illegal_request;
1971 case SYNCHRONIZE_CACHE:
1972 /* The request is used as the AIO opaque value, so add a ref. */
1973 scsi_req_ref(&r->req);
1974 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
1975 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
1976 return 0;
1977 case SEEK_10:
1978 DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
1979 if (r->req.cmd.lba > s->qdev.max_lba) {
1980 goto illegal_lba;
1981 }
1982 break;
1983 case MODE_SELECT:
1984 DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1985 break;
1986 case MODE_SELECT_10:
1987 DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1988 break;
1989 case UNMAP:
1990 DPRINTF("Unmap (len %lu)\n", (long)r->req.cmd.xfer);
1991 break;
1992 case VERIFY_10:
1993 case VERIFY_12:
1994 case VERIFY_16:
1995 DPRINTF("Verify (bytchk %lu)\n", (r->req.buf[1] >> 1) & 3);
1996 if (req->cmd.buf[1] & 6) {
1997 goto illegal_request;
1998 }
1999 break;
2000 case WRITE_SAME_10:
2001 case WRITE_SAME_16:
2002 DPRINTF("WRITE SAME %d (len %lu)\n",
2003 req->cmd.buf[0] == WRITE_SAME_10 ? 10 : 16,
2004 (long)r->req.cmd.xfer);
2005 break;
2006 default:
2007 DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
2008 scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
2009 return 0;
2010 }
2011 assert(!r->req.aiocb);
2012 r->iov.iov_len = MIN(r->buflen, req->cmd.xfer);
2013 if (r->iov.iov_len == 0) {
2014 scsi_req_complete(&r->req, GOOD);
2015 }
2016 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
2017 assert(r->iov.iov_len == req->cmd.xfer);
2018 return -r->iov.iov_len;
2019 } else {
2020 return r->iov.iov_len;
2021 }
2022
2023 illegal_request:
2024 if (r->req.status == -1) {
2025 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
2026 }
2027 return 0;
2028
2029 illegal_lba:
2030 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
2031 return 0;
2032 }
2033
2034 /* Execute a scsi command. Returns the length of the data expected by the
2035 command. This will be Positive for data transfers from the device
2036 (eg. disk reads), negative for transfers to the device (eg. disk writes),
2037 and zero if the command does not transfer any data. */
2038
2039 static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
2040 {
2041 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
2042 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
2043 uint32_t len;
2044 uint8_t command;
2045
2046 command = buf[0];
2047
2048 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
2049 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
2050 return 0;
2051 }
2052
2053 len = scsi_data_cdb_length(r->req.cmd.buf);
2054 switch (command) {
2055 case READ_6:
2056 case READ_10:
2057 case READ_12:
2058 case READ_16:
2059 DPRINTF("Read (sector %" PRId64 ", count %u)\n", r->req.cmd.lba, len);
2060 if (r->req.cmd.buf[1] & 0xe0) {
2061 goto illegal_request;
2062 }
2063 if (!check_lba_range(s, r->req.cmd.lba, len)) {
2064 goto illegal_lba;
2065 }
2066 r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
2067 r->sector_count = len * (s->qdev.blocksize / 512);
2068 break;
2069 case WRITE_6:
2070 case WRITE_10:
2071 case WRITE_12:
2072 case WRITE_16:
2073 case WRITE_VERIFY_10:
2074 case WRITE_VERIFY_12:
2075 case WRITE_VERIFY_16:
2076 if (bdrv_is_read_only(s->qdev.conf.bs)) {
2077 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
2078 return 0;
2079 }
2080 DPRINTF("Write %s(sector %" PRId64 ", count %u)\n",
2081 (command & 0xe) == 0xe ? "And Verify " : "",
2082 r->req.cmd.lba, len);
2083 if (r->req.cmd.buf[1] & 0xe0) {
2084 goto illegal_request;
2085 }
2086 if (!check_lba_range(s, r->req.cmd.lba, len)) {
2087 goto illegal_lba;
2088 }
2089 r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
2090 r->sector_count = len * (s->qdev.blocksize / 512);
2091 break;
2092 default:
2093 abort();
2094 illegal_request:
2095 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
2096 return 0;
2097 illegal_lba:
2098 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
2099 return 0;
2100 }
2101 if (r->sector_count == 0) {
2102 scsi_req_complete(&r->req, GOOD);
2103 }
2104 assert(r->iov.iov_len == 0);
2105 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
2106 return -r->sector_count * 512;
2107 } else {
2108 return r->sector_count * 512;
2109 }
2110 }
2111
2112 static void scsi_disk_reset(DeviceState *dev)
2113 {
2114 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
2115 uint64_t nb_sectors;
2116
2117 scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
2118
2119 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
2120 nb_sectors /= s->qdev.blocksize / 512;
2121 if (nb_sectors) {
2122 nb_sectors--;
2123 }
2124 s->qdev.max_lba = nb_sectors;
2125 /* reset tray statuses */
2126 s->tray_locked = 0;
2127 s->tray_open = 0;
2128 }
2129
2130 static void scsi_destroy(SCSIDevice *dev)
2131 {
2132 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2133
2134 scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
2135 blockdev_mark_auto_del(s->qdev.conf.bs);
2136 }
2137
2138 static void scsi_disk_resize_cb(void *opaque)
2139 {
2140 SCSIDiskState *s = opaque;
2141
2142 /* SPC lists this sense code as available only for
2143 * direct-access devices.
2144 */
2145 if (s->qdev.type == TYPE_DISK) {
2146 scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
2147 }
2148 }
2149
2150 static void scsi_cd_change_media_cb(void *opaque, bool load)
2151 {
2152 SCSIDiskState *s = opaque;
2153
2154 /*
2155 * When a CD gets changed, we have to report an ejected state and
2156 * then a loaded state to guests so that they detect tray
2157 * open/close and media change events. Guests that do not use
2158 * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
2159 * states rely on this behavior.
2160 *
2161 * media_changed governs the state machine used for unit attention
2162 * report. media_event is used by GET EVENT STATUS NOTIFICATION.
2163 */
2164 s->media_changed = load;
2165 s->tray_open = !load;
2166 scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM));
2167 s->media_event = true;
2168 s->eject_request = false;
2169 }
2170
2171 static void scsi_cd_eject_request_cb(void *opaque, bool force)
2172 {
2173 SCSIDiskState *s = opaque;
2174
2175 s->eject_request = true;
2176 if (force) {
2177 s->tray_locked = false;
2178 }
2179 }
2180
2181 static bool scsi_cd_is_tray_open(void *opaque)
2182 {
2183 return ((SCSIDiskState *)opaque)->tray_open;
2184 }
2185
2186 static bool scsi_cd_is_medium_locked(void *opaque)
2187 {
2188 return ((SCSIDiskState *)opaque)->tray_locked;
2189 }
2190
2191 static const BlockDevOps scsi_disk_removable_block_ops = {
2192 .change_media_cb = scsi_cd_change_media_cb,
2193 .eject_request_cb = scsi_cd_eject_request_cb,
2194 .is_tray_open = scsi_cd_is_tray_open,
2195 .is_medium_locked = scsi_cd_is_medium_locked,
2196
2197 .resize_cb = scsi_disk_resize_cb,
2198 };
2199
2200 static const BlockDevOps scsi_disk_block_ops = {
2201 .resize_cb = scsi_disk_resize_cb,
2202 };
2203
2204 static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
2205 {
2206 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2207 if (s->media_changed) {
2208 s->media_changed = false;
2209 scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED));
2210 }
2211 }
2212
2213 static int scsi_initfn(SCSIDevice *dev)
2214 {
2215 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2216
2217 if (!s->qdev.conf.bs) {
2218 error_report("drive property not set");
2219 return -1;
2220 }
2221
2222 if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
2223 !bdrv_is_inserted(s->qdev.conf.bs)) {
2224 error_report("Device needs media, but drive is empty");
2225 return -1;
2226 }
2227
2228 blkconf_serial(&s->qdev.conf, &s->serial);
2229 if (dev->type == TYPE_DISK
2230 && blkconf_geometry(&dev->conf, NULL, 65535, 255, 255) < 0) {
2231 return -1;
2232 }
2233
2234 if (s->qdev.conf.discard_granularity == -1) {
2235 s->qdev.conf.discard_granularity =
2236 MAX(s->qdev.conf.logical_block_size, DEFAULT_DISCARD_GRANULARITY);
2237 }
2238
2239 if (!s->version) {
2240 s->version = g_strdup(qemu_get_version());
2241 }
2242 if (!s->vendor) {
2243 s->vendor = g_strdup("QEMU");
2244 }
2245
2246 if (bdrv_is_sg(s->qdev.conf.bs)) {
2247 error_report("unwanted /dev/sg*");
2248 return -1;
2249 }
2250
2251 if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
2252 !(s->features & (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS))) {
2253 bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_removable_block_ops, s);
2254 } else {
2255 bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_block_ops, s);
2256 }
2257 bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
2258
2259 bdrv_iostatus_enable(s->qdev.conf.bs);
2260 add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
2261 return 0;
2262 }
2263
2264 static int scsi_hd_initfn(SCSIDevice *dev)
2265 {
2266 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2267 s->qdev.blocksize = s->qdev.conf.logical_block_size;
2268 s->qdev.type = TYPE_DISK;
2269 if (!s->product) {
2270 s->product = g_strdup("QEMU HARDDISK");
2271 }
2272 return scsi_initfn(&s->qdev);
2273 }
2274
2275 static int scsi_cd_initfn(SCSIDevice *dev)
2276 {
2277 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2278 s->qdev.blocksize = 2048;
2279 s->qdev.type = TYPE_ROM;
2280 s->features |= 1 << SCSI_DISK_F_REMOVABLE;
2281 if (!s->product) {
2282 s->product = g_strdup("QEMU CD-ROM");
2283 }
2284 return scsi_initfn(&s->qdev);
2285 }
2286
2287 static int scsi_disk_initfn(SCSIDevice *dev)
2288 {
2289 DriveInfo *dinfo;
2290
2291 if (!dev->conf.bs) {
2292 return scsi_initfn(dev); /* ... and die there */
2293 }
2294
2295 dinfo = drive_get_by_blockdev(dev->conf.bs);
2296 if (dinfo->media_cd) {
2297 return scsi_cd_initfn(dev);
2298 } else {
2299 return scsi_hd_initfn(dev);
2300 }
2301 }
2302
2303 static const SCSIReqOps scsi_disk_emulate_reqops = {
2304 .size = sizeof(SCSIDiskReq),
2305 .free_req = scsi_free_request,
2306 .send_command = scsi_disk_emulate_command,
2307 .read_data = scsi_disk_emulate_read_data,
2308 .write_data = scsi_disk_emulate_write_data,
2309 .cancel_io = scsi_cancel_io,
2310 .get_buf = scsi_get_buf,
2311 };
2312
2313 static const SCSIReqOps scsi_disk_dma_reqops = {
2314 .size = sizeof(SCSIDiskReq),
2315 .free_req = scsi_free_request,
2316 .send_command = scsi_disk_dma_command,
2317 .read_data = scsi_read_data,
2318 .write_data = scsi_write_data,
2319 .cancel_io = scsi_cancel_io,
2320 .get_buf = scsi_get_buf,
2321 .load_request = scsi_disk_load_request,
2322 .save_request = scsi_disk_save_request,
2323 };
2324
2325 static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = {
2326 [TEST_UNIT_READY] = &scsi_disk_emulate_reqops,
2327 [INQUIRY] = &scsi_disk_emulate_reqops,
2328 [MODE_SENSE] = &scsi_disk_emulate_reqops,
2329 [MODE_SENSE_10] = &scsi_disk_emulate_reqops,
2330 [START_STOP] = &scsi_disk_emulate_reqops,
2331 [ALLOW_MEDIUM_REMOVAL] = &scsi_disk_emulate_reqops,
2332 [READ_CAPACITY_10] = &scsi_disk_emulate_reqops,
2333 [READ_TOC] = &scsi_disk_emulate_reqops,
2334 [READ_DVD_STRUCTURE] = &scsi_disk_emulate_reqops,
2335 [READ_DISC_INFORMATION] = &scsi_disk_emulate_reqops,
2336 [GET_CONFIGURATION] = &scsi_disk_emulate_reqops,
2337 [GET_EVENT_STATUS_NOTIFICATION] = &scsi_disk_emulate_reqops,
2338 [MECHANISM_STATUS] = &scsi_disk_emulate_reqops,
2339 [SERVICE_ACTION_IN_16] = &scsi_disk_emulate_reqops,
2340 [REQUEST_SENSE] = &scsi_disk_emulate_reqops,
2341 [SYNCHRONIZE_CACHE] = &scsi_disk_emulate_reqops,
2342 [SEEK_10] = &scsi_disk_emulate_reqops,
2343 [MODE_SELECT] = &scsi_disk_emulate_reqops,
2344 [MODE_SELECT_10] = &scsi_disk_emulate_reqops,
2345 [UNMAP] = &scsi_disk_emulate_reqops,
2346 [WRITE_SAME_10] = &scsi_disk_emulate_reqops,
2347 [WRITE_SAME_16] = &scsi_disk_emulate_reqops,
2348 [VERIFY_10] = &scsi_disk_emulate_reqops,
2349 [VERIFY_12] = &scsi_disk_emulate_reqops,
2350 [VERIFY_16] = &scsi_disk_emulate_reqops,
2351
2352 [READ_6] = &scsi_disk_dma_reqops,
2353 [READ_10] = &scsi_disk_dma_reqops,
2354 [READ_12] = &scsi_disk_dma_reqops,
2355 [READ_16] = &scsi_disk_dma_reqops,
2356 [WRITE_6] = &scsi_disk_dma_reqops,
2357 [WRITE_10] = &scsi_disk_dma_reqops,
2358 [WRITE_12] = &scsi_disk_dma_reqops,
2359 [WRITE_16] = &scsi_disk_dma_reqops,
2360 [WRITE_VERIFY_10] = &scsi_disk_dma_reqops,
2361 [WRITE_VERIFY_12] = &scsi_disk_dma_reqops,
2362 [WRITE_VERIFY_16] = &scsi_disk_dma_reqops,
2363 };
2364
2365 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
2366 uint8_t *buf, void *hba_private)
2367 {
2368 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
2369 SCSIRequest *req;
2370 const SCSIReqOps *ops;
2371 uint8_t command;
2372
2373 command = buf[0];
2374 ops = scsi_disk_reqops_dispatch[command];
2375 if (!ops) {
2376 ops = &scsi_disk_emulate_reqops;
2377 }
2378 req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private);
2379
2380 #ifdef DEBUG_SCSI
2381 DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
2382 {
2383 int i;
2384 for (i = 1; i < req->cmd.len; i++) {
2385 printf(" 0x%02x", buf[i]);
2386 }
2387 printf("\n");
2388 }
2389 #endif
2390
2391 return req;
2392 }
2393
2394 #ifdef __linux__
2395 static int get_device_type(SCSIDiskState *s)
2396 {
2397 BlockDriverState *bdrv = s->qdev.conf.bs;
2398 uint8_t cmd[16];
2399 uint8_t buf[36];
2400 uint8_t sensebuf[8];
2401 sg_io_hdr_t io_header;
2402 int ret;
2403
2404 memset(cmd, 0, sizeof(cmd));
2405 memset(buf, 0, sizeof(buf));
2406 cmd[0] = INQUIRY;
2407 cmd[4] = sizeof(buf);
2408
2409 memset(&io_header, 0, sizeof(io_header));
2410 io_header.interface_id = 'S';
2411 io_header.dxfer_direction = SG_DXFER_FROM_DEV;
2412 io_header.dxfer_len = sizeof(buf);
2413 io_header.dxferp = buf;
2414 io_header.cmdp = cmd;
2415 io_header.cmd_len = sizeof(cmd);
2416 io_header.mx_sb_len = sizeof(sensebuf);
2417 io_header.sbp = sensebuf;
2418 io_header.timeout = 6000; /* XXX */
2419
2420 ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
2421 if (ret < 0 || io_header.driver_status || io_header.host_status) {
2422 return -1;
2423 }
2424 s->qdev.type = buf[0];
2425 if (buf[1] & 0x80) {
2426 s->features |= 1 << SCSI_DISK_F_REMOVABLE;
2427 }
2428 return 0;
2429 }
2430
2431 static int scsi_block_initfn(SCSIDevice *dev)
2432 {
2433 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2434 int sg_version;
2435 int rc;
2436
2437 if (!s->qdev.conf.bs) {
2438 error_report("scsi-block: drive property not set");
2439 return -1;
2440 }
2441
2442 /* check we are using a driver managing SG_IO (version 3 and after) */
2443 if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
2444 sg_version < 30000) {
2445 error_report("scsi-block: scsi generic interface too old");
2446 return -1;
2447 }
2448
2449 /* get device type from INQUIRY data */
2450 rc = get_device_type(s);
2451 if (rc < 0) {
2452 error_report("scsi-block: INQUIRY failed");
2453 return -1;
2454 }
2455
2456 /* Make a guess for the block size, we'll fix it when the guest sends.
2457 * READ CAPACITY. If they don't, they likely would assume these sizes
2458 * anyway. (TODO: check in /sys).
2459 */
2460 if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
2461 s->qdev.blocksize = 2048;
2462 } else {
2463 s->qdev.blocksize = 512;
2464 }
2465
2466 /* Makes the scsi-block device not removable by using HMP and QMP eject
2467 * command.
2468 */
2469 s->features |= (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS);
2470
2471 return scsi_initfn(&s->qdev);
2472 }
2473
2474 static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
2475 uint32_t lun, uint8_t *buf,
2476 void *hba_private)
2477 {
2478 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
2479
2480 switch (buf[0]) {
2481 case READ_6:
2482 case READ_10:
2483 case READ_12:
2484 case READ_16:
2485 case VERIFY_10:
2486 case VERIFY_12:
2487 case VERIFY_16:
2488 case WRITE_6:
2489 case WRITE_10:
2490 case WRITE_12:
2491 case WRITE_16:
2492 case WRITE_VERIFY_10:
2493 case WRITE_VERIFY_12:
2494 case WRITE_VERIFY_16:
2495 /* If we are not using O_DIRECT, we might read stale data from the
2496 * host cache if writes were made using other commands than these
2497 * ones (such as WRITE SAME or EXTENDED COPY, etc.). So, without
2498 * O_DIRECT everything must go through SG_IO.
2499 */
2500 if (bdrv_get_flags(s->qdev.conf.bs) & BDRV_O_NOCACHE) {
2501 break;
2502 }
2503
2504 /* MMC writing cannot be done via pread/pwrite, because it sometimes
2505 * involves writing beyond the maximum LBA or to negative LBA (lead-in).
2506 * And once you do these writes, reading from the block device is
2507 * unreliable, too. It is even possible that reads deliver random data
2508 * from the host page cache (this is probably a Linux bug).
2509 *
2510 * We might use scsi_disk_dma_reqops as long as no writing commands are
2511 * seen, but performance usually isn't paramount on optical media. So,
2512 * just make scsi-block operate the same as scsi-generic for them.
2513 */
2514 if (s->qdev.type != TYPE_ROM) {
2515 return scsi_req_alloc(&scsi_disk_dma_reqops, &s->qdev, tag, lun,
2516 hba_private);
2517 }
2518 }
2519
2520 return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
2521 hba_private);
2522 }
2523 #endif
2524
2525 #define DEFINE_SCSI_DISK_PROPERTIES() \
2526 DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf), \
2527 DEFINE_PROP_STRING("ver", SCSIDiskState, version), \
2528 DEFINE_PROP_STRING("serial", SCSIDiskState, serial), \
2529 DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor), \
2530 DEFINE_PROP_STRING("product", SCSIDiskState, product)
2531
2532 static Property scsi_hd_properties[] = {
2533 DEFINE_SCSI_DISK_PROPERTIES(),
2534 DEFINE_PROP_BIT("removable", SCSIDiskState, features,
2535 SCSI_DISK_F_REMOVABLE, false),
2536 DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
2537 SCSI_DISK_F_DPOFUA, false),
2538 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2539 DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size,
2540 DEFAULT_MAX_UNMAP_SIZE),
2541 DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf),
2542 DEFINE_PROP_END_OF_LIST(),
2543 };
2544
2545 static const VMStateDescription vmstate_scsi_disk_state = {
2546 .name = "scsi-disk",
2547 .version_id = 1,
2548 .minimum_version_id = 1,
2549 .minimum_version_id_old = 1,
2550 .fields = (VMStateField[]) {
2551 VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState),
2552 VMSTATE_BOOL(media_changed, SCSIDiskState),
2553 VMSTATE_BOOL(media_event, SCSIDiskState),
2554 VMSTATE_BOOL(eject_request, SCSIDiskState),
2555 VMSTATE_BOOL(tray_open, SCSIDiskState),
2556 VMSTATE_BOOL(tray_locked, SCSIDiskState),
2557 VMSTATE_END_OF_LIST()
2558 }
2559 };
2560
2561 static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
2562 {
2563 DeviceClass *dc = DEVICE_CLASS(klass);
2564 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2565
2566 sc->init = scsi_hd_initfn;
2567 sc->destroy = scsi_destroy;
2568 sc->alloc_req = scsi_new_request;
2569 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2570 dc->fw_name = "disk";
2571 dc->desc = "virtual SCSI disk";
2572 dc->reset = scsi_disk_reset;
2573 dc->props = scsi_hd_properties;
2574 dc->vmsd = &vmstate_scsi_disk_state;
2575 }
2576
2577 static const TypeInfo scsi_hd_info = {
2578 .name = "scsi-hd",
2579 .parent = TYPE_SCSI_DEVICE,
2580 .instance_size = sizeof(SCSIDiskState),
2581 .class_init = scsi_hd_class_initfn,
2582 };
2583
2584 static Property scsi_cd_properties[] = {
2585 DEFINE_SCSI_DISK_PROPERTIES(),
2586 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2587 DEFINE_PROP_END_OF_LIST(),
2588 };
2589
2590 static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
2591 {
2592 DeviceClass *dc = DEVICE_CLASS(klass);
2593 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2594
2595 sc->init = scsi_cd_initfn;
2596 sc->destroy = scsi_destroy;
2597 sc->alloc_req = scsi_new_request;
2598 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2599 dc->fw_name = "disk";
2600 dc->desc = "virtual SCSI CD-ROM";
2601 dc->reset = scsi_disk_reset;
2602 dc->props = scsi_cd_properties;
2603 dc->vmsd = &vmstate_scsi_disk_state;
2604 }
2605
2606 static const TypeInfo scsi_cd_info = {
2607 .name = "scsi-cd",
2608 .parent = TYPE_SCSI_DEVICE,
2609 .instance_size = sizeof(SCSIDiskState),
2610 .class_init = scsi_cd_class_initfn,
2611 };
2612
2613 #ifdef __linux__
2614 static Property scsi_block_properties[] = {
2615 DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.bs),
2616 DEFINE_PROP_INT32("bootindex", SCSIDiskState, qdev.conf.bootindex, -1),
2617 DEFINE_PROP_END_OF_LIST(),
2618 };
2619
2620 static void scsi_block_class_initfn(ObjectClass *klass, void *data)
2621 {
2622 DeviceClass *dc = DEVICE_CLASS(klass);
2623 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2624
2625 sc->init = scsi_block_initfn;
2626 sc->destroy = scsi_destroy;
2627 sc->alloc_req = scsi_block_new_request;
2628 dc->fw_name = "disk";
2629 dc->desc = "SCSI block device passthrough";
2630 dc->reset = scsi_disk_reset;
2631 dc->props = scsi_block_properties;
2632 dc->vmsd = &vmstate_scsi_disk_state;
2633 }
2634
2635 static const TypeInfo scsi_block_info = {
2636 .name = "scsi-block",
2637 .parent = TYPE_SCSI_DEVICE,
2638 .instance_size = sizeof(SCSIDiskState),
2639 .class_init = scsi_block_class_initfn,
2640 };
2641 #endif
2642
2643 static Property scsi_disk_properties[] = {
2644 DEFINE_SCSI_DISK_PROPERTIES(),
2645 DEFINE_PROP_BIT("removable", SCSIDiskState, features,
2646 SCSI_DISK_F_REMOVABLE, false),
2647 DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
2648 SCSI_DISK_F_DPOFUA, false),
2649 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2650 DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size,
2651 DEFAULT_MAX_UNMAP_SIZE),
2652 DEFINE_PROP_END_OF_LIST(),
2653 };
2654
2655 static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
2656 {
2657 DeviceClass *dc = DEVICE_CLASS(klass);
2658 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2659
2660 sc->init = scsi_disk_initfn;
2661 sc->destroy = scsi_destroy;
2662 sc->alloc_req = scsi_new_request;
2663 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2664 dc->fw_name = "disk";
2665 dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
2666 dc->reset = scsi_disk_reset;
2667 dc->props = scsi_disk_properties;
2668 dc->vmsd = &vmstate_scsi_disk_state;
2669 }
2670
2671 static const TypeInfo scsi_disk_info = {
2672 .name = "scsi-disk",
2673 .parent = TYPE_SCSI_DEVICE,
2674 .instance_size = sizeof(SCSIDiskState),
2675 .class_init = scsi_disk_class_initfn,
2676 };
2677
2678 static void scsi_disk_register_types(void)
2679 {
2680 type_register_static(&scsi_hd_info);
2681 type_register_static(&scsi_cd_info);
2682 #ifdef __linux__
2683 type_register_static(&scsi_block_info);
2684 #endif
2685 type_register_static(&scsi_disk_info);
2686 }
2687
2688 type_init(scsi_disk_register_types)