hw/usb/dev-storage.c

   1 /*
   2  * USB Mass Storage Device emulation
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the LGPL.
   8  */
   9
  10 #include "qemu-common.h"
  11 #include "qemu-option.h"
  12 #include "qemu-config.h"
  13 #include "hw/usb.h"
  14 #include "hw/usb/desc.h"
  15 #include "hw/scsi.h"
  16 #include "console.h"
  17 #include "monitor.h"
  18 #include "sysemu.h"
  19 #include "blockdev.h"
  20
  21 //#define DEBUG_MSD
  22
  23 #ifdef DEBUG_MSD
  24 #define DPRINTF(fmt, ...) \
  25 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
  26 #else
  27 #define DPRINTF(fmt, ...) do {} while(0)
  28 #endif
  29
  30 /* USB requests.  */
  31 #define MassStorageReset  0xff
  32 #define GetMaxLun         0xfe
  33
  34 enum USBMSDMode {
  35     USB_MSDM_CBW, /* Command Block.  */
  36     USB_MSDM_DATAOUT, /* Transfer data to device.  */
  37     USB_MSDM_DATAIN, /* Transfer data from device.  */
  38     USB_MSDM_CSW /* Command Status.  */
  39 };
  40
  41 struct usb_msd_csw {
  42     uint32_t sig;
  43     uint32_t tag;
  44     uint32_t residue;
  45     uint8_t status;
  46 };
  47
  48 typedef struct {
  49     USBDevice dev;
  50     enum USBMSDMode mode;
  51     uint32_t scsi_off;
  52     uint32_t scsi_len;
  53     uint32_t data_len;
  54     struct usb_msd_csw csw;
  55     SCSIRequest *req;
  56     SCSIBus bus;
  57     BlockConf conf;
  58     char *serial;
  59     SCSIDevice *scsi_dev;
  60     uint32_t removable;
  61     /* For async completion.  */
  62     USBPacket *packet;
  63 } MSDState;
  64
  65 struct usb_msd_cbw {
  66     uint32_t sig;
  67     uint32_t tag;
  68     uint32_t data_len;
  69     uint8_t flags;
  70     uint8_t lun;
  71     uint8_t cmd_len;
  72     uint8_t cmd[16];
  73 };
  74
  75 enum {
  76     STR_MANUFACTURER = 1,
  77     STR_PRODUCT,
  78     STR_SERIALNUMBER,
  79     STR_CONFIG_FULL,
  80     STR_CONFIG_HIGH,
  81 };
  82
  83 static const USBDescStrings desc_strings = {
  84     [STR_MANUFACTURER] = "QEMU",
  85     [STR_PRODUCT]      = "QEMU USB HARDDRIVE",
  86     [STR_SERIALNUMBER] = "1",
  87     [STR_CONFIG_FULL]  = "Full speed config (usb 1.1)",
  88     [STR_CONFIG_HIGH]  = "High speed config (usb 2.0)",
  89 };
  90
  91 static const USBDescIface desc_iface_full = {
  92     .bInterfaceNumber              = 0,
  93     .bNumEndpoints                 = 2,
  94     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
  95     .bInterfaceSubClass            = 0x06, /* SCSI */
  96     .bInterfaceProtocol            = 0x50, /* Bulk */
  97     .eps = (USBDescEndpoint[]) {
  98         {
  99             .bEndpointAddress      = USB_DIR_IN | 0x01,
 100             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 101             .wMaxPacketSize        = 64,
 102         },{
 103             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 104             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 105             .wMaxPacketSize        = 64,
 106         },
 107     }
 108 };
 109
 110 static const USBDescDevice desc_device_full = {
 111     .bcdUSB                        = 0x0200,
 112     .bMaxPacketSize0               = 8,
 113     .bNumConfigurations            = 1,
 114     .confs = (USBDescConfig[]) {
 115         {
 116             .bNumInterfaces        = 1,
 117             .bConfigurationValue   = 1,
 118             .iConfiguration        = STR_CONFIG_FULL,
 119             .bmAttributes          = 0xc0,
 120             .nif = 1,
 121             .ifs = &desc_iface_full,
 122         },
 123     },
 124 };
 125
 126 static const USBDescIface desc_iface_high = {
 127     .bInterfaceNumber              = 0,
 128     .bNumEndpoints                 = 2,
 129     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 130     .bInterfaceSubClass            = 0x06, /* SCSI */
 131     .bInterfaceProtocol            = 0x50, /* Bulk */
 132     .eps = (USBDescEndpoint[]) {
 133         {
 134             .bEndpointAddress      = USB_DIR_IN | 0x01,
 135             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 136             .wMaxPacketSize        = 512,
 137         },{
 138             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 139             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 140             .wMaxPacketSize        = 512,
 141         },
 142     }
 143 };
 144
 145 static const USBDescDevice desc_device_high = {
 146     .bcdUSB                        = 0x0200,
 147     .bMaxPacketSize0               = 64,
 148     .bNumConfigurations            = 1,
 149     .confs = (USBDescConfig[]) {
 150         {
 151             .bNumInterfaces        = 1,
 152             .bConfigurationValue   = 1,
 153             .iConfiguration        = STR_CONFIG_HIGH,
 154             .bmAttributes          = 0xc0,
 155             .nif = 1,
 156             .ifs = &desc_iface_high,
 157         },
 158     },
 159 };
 160
 161 static const USBDesc desc = {
 162     .id = {
 163         .idVendor          = 0x46f4, /* CRC16() of "QEMU" */
 164         .idProduct         = 0x0001,
 165         .bcdDevice         = 0,
 166         .iManufacturer     = STR_MANUFACTURER,
 167         .iProduct          = STR_PRODUCT,
 168         .iSerialNumber     = STR_SERIALNUMBER,
 169     },
 170     .full = &desc_device_full,
 171     .high = &desc_device_high,
 172     .str  = desc_strings,
 173 };
 174
 175 static void usb_msd_copy_data(MSDState *s, USBPacket *p)
 176 {
 177     uint32_t len;
 178     len = p->iov.size - p->result;
 179     if (len > s->scsi_len)
 180         len = s->scsi_len;
 181     usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len);
 182     s->scsi_len -= len;
 183     s->scsi_off += len;
 184     s->data_len -= len;
 185     if (s->scsi_len == 0 || s->data_len == 0) {
 186         scsi_req_continue(s->req);
 187     }
 188 }
 189
 190 static void usb_msd_send_status(MSDState *s, USBPacket *p)
 191 {
 192     int len;
 193
 194     DPRINTF("Command status %d tag 0x%x, len %zd\n",
 195             s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
 196
 197     assert(s->csw.sig == cpu_to_le32(0x53425355));
 198     len = MIN(sizeof(s->csw), p->iov.size);
 199     usb_packet_copy(p, &s->csw, len);
 200     memset(&s->csw, 0, sizeof(s->csw));
 201 }
 202
 203 static void usb_msd_packet_complete(MSDState *s)
 204 {
 205     USBPacket *p = s->packet;
 206
 207     /* Set s->packet to NULL before calling usb_packet_complete
 208        because another request may be issued before
 209        usb_packet_complete returns.  */
 210     DPRINTF("Packet complete %p\n", p);
 211     s->packet = NULL;
 212     usb_packet_complete(&s->dev, p);
 213 }
 214
 215 static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
 216 {
 217     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 218     USBPacket *p = s->packet;
 219
 220     assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
 221     s->scsi_len = len;
 222     s->scsi_off = 0;
 223     if (p) {
 224         usb_msd_copy_data(s, p);
 225         p = s->packet;
 226         if (p && p->result == p->iov.size) {
 227             usb_msd_packet_complete(s);
 228         }
 229     }
 230 }
 231
 232 static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t resid)
 233 {
 234     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 235     USBPacket *p = s->packet;
 236
 237     DPRINTF("Command complete %d tag 0x%x\n", status, req->tag);
 238
 239     s->csw.sig = cpu_to_le32(0x53425355);
 240     s->csw.tag = cpu_to_le32(req->tag);
 241     s->csw.residue = cpu_to_le32(s->data_len);
 242     s->csw.status = status != 0;
 243
 244     if (s->packet) {
 245         if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
 246             /* A deferred packet with no write data remaining must be
 247                the status read packet.  */
 248             usb_msd_send_status(s, p);
 249             s->mode = USB_MSDM_CBW;
 250         } else {
 251             if (s->data_len) {
 252                 int len = (p->iov.size - p->result);
 253                 usb_packet_skip(p, len);
 254                 s->data_len -= len;
 255             }
 256             if (s->data_len == 0) {
 257                 s->mode = USB_MSDM_CSW;
 258             }
 259         }
 260         usb_msd_packet_complete(s);
 261     } else if (s->data_len == 0) {
 262         s->mode = USB_MSDM_CSW;
 263     }
 264     scsi_req_unref(req);
 265     s->req = NULL;
 266 }
 267
 268 static void usb_msd_request_cancelled(SCSIRequest *req)
 269 {
 270     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 271
 272     if (req == s->req) {
 273         scsi_req_unref(s->req);
 274         s->req = NULL;
 275         s->scsi_len = 0;
 276     }
 277 }
 278
 279 static void usb_msd_handle_reset(USBDevice *dev)
 280 {
 281     MSDState *s = (MSDState *)dev;
 282
 283     DPRINTF("Reset\n");
 284     if (s->req) {
 285         scsi_req_cancel(s->req);
 286     }
 287     assert(s->req == NULL);
 288
 289     if (s->packet) {
 290         s->packet->result = USB_RET_STALL;
 291         usb_msd_packet_complete(s);
 292     }
 293
 294     s->mode = USB_MSDM_CBW;
 295 }
 296
 297 static int usb_msd_handle_control(USBDevice *dev, USBPacket *p,
 298                int request, int value, int index, int length, uint8_t *data)
 299 {
 300     MSDState *s = (MSDState *)dev;
 301     int ret;
 302
 303     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
 304     if (ret >= 0) {
 305         return ret;
 306     }
 307
 308     ret = 0;
 309     switch (request) {
 310     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 311         ret = 0;
 312         break;
 313         /* Class specific requests.  */
 314     case ClassInterfaceOutRequest | MassStorageReset:
 315         /* Reset state ready for the next CBW.  */
 316         s->mode = USB_MSDM_CBW;
 317         ret = 0;
 318         break;
 319     case ClassInterfaceRequest | GetMaxLun:
 320         data[0] = 0;
 321         ret = 1;
 322         break;
 323     default:
 324         ret = USB_RET_STALL;
 325         break;
 326     }
 327     return ret;
 328 }
 329
 330 static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
 331 {
 332     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 333
 334     assert(s->packet == p);
 335     s->packet = NULL;
 336
 337     if (s->req) {
 338         scsi_req_cancel(s->req);
 339     }
 340 }
 341
 342 static int usb_msd_handle_data(USBDevice *dev, USBPacket *p)
 343 {
 344     MSDState *s = (MSDState *)dev;
 345     uint32_t tag;
 346     int ret = 0;
 347     struct usb_msd_cbw cbw;
 348     uint8_t devep = p->ep->nr;
 349
 350     switch (p->pid) {
 351     case USB_TOKEN_OUT:
 352         if (devep != 2)
 353             goto fail;
 354
 355         switch (s->mode) {
 356         case USB_MSDM_CBW:
 357             if (p->iov.size != 31) {
 358                 fprintf(stderr, "usb-msd: Bad CBW size");
 359                 goto fail;
 360             }
 361             usb_packet_copy(p, &cbw, 31);
 362             if (le32_to_cpu(cbw.sig) != 0x43425355) {
 363                 fprintf(stderr, "usb-msd: Bad signature %08x\n",
 364                         le32_to_cpu(cbw.sig));
 365                 goto fail;
 366             }
 367             DPRINTF("Command on LUN %d\n", cbw.lun);
 368             if (cbw.lun != 0) {
 369                 fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
 370                 goto fail;
 371             }
 372             tag = le32_to_cpu(cbw.tag);
 373             s->data_len = le32_to_cpu(cbw.data_len);
 374             if (s->data_len == 0) {
 375                 s->mode = USB_MSDM_CSW;
 376             } else if (cbw.flags & 0x80) {
 377                 s->mode = USB_MSDM_DATAIN;
 378             } else {
 379                 s->mode = USB_MSDM_DATAOUT;
 380             }
 381             DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
 382                     tag, cbw.flags, cbw.cmd_len, s->data_len);
 383             assert(le32_to_cpu(s->csw.residue) == 0);
 384             s->scsi_len = 0;
 385             s->req = scsi_req_new(s->scsi_dev, tag, 0, cbw.cmd, NULL);
 386             scsi_req_enqueue(s->req);
 387             if (s->req && s->req->cmd.xfer != SCSI_XFER_NONE) {
 388                 scsi_req_continue(s->req);
 389             }
 390             ret = p->result;
 391             break;
 392
 393         case USB_MSDM_DATAOUT:
 394             DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
 395             if (p->iov.size > s->data_len) {
 396                 goto fail;
 397             }
 398
 399             if (s->scsi_len) {
 400                 usb_msd_copy_data(s, p);
 401             }
 402             if (le32_to_cpu(s->csw.residue)) {
 403                 int len = p->iov.size - p->result;
 404                 if (len) {
 405                     usb_packet_skip(p, len);
 406                     s->data_len -= len;
 407                     if (s->data_len == 0) {
 408                         s->mode = USB_MSDM_CSW;
 409                     }
 410                 }
 411             }
 412             if (p->result < p->iov.size) {
 413                 DPRINTF("Deferring packet %p\n", p);
 414                 s->packet = p;
 415                 ret = USB_RET_ASYNC;
 416             } else {
 417                 ret = p->result;
 418             }
 419             break;
 420
 421         default:
 422             DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
 423             goto fail;
 424         }
 425         break;
 426
 427     case USB_TOKEN_IN:
 428         if (devep != 1)
 429             goto fail;
 430
 431         switch (s->mode) {
 432         case USB_MSDM_DATAOUT:
 433             if (s->data_len != 0 || p->iov.size < 13) {
 434                 goto fail;
 435             }
 436             /* Waiting for SCSI write to complete.  */
 437             s->packet = p;
 438             ret = USB_RET_ASYNC;
 439             break;
 440
 441         case USB_MSDM_CSW:
 442             if (p->iov.size < 13) {
 443                 goto fail;
 444             }
 445
 446             if (s->req) {
 447                 /* still in flight */
 448                 s->packet = p;
 449                 ret = USB_RET_ASYNC;
 450             } else {
 451                 usb_msd_send_status(s, p);
 452                 s->mode = USB_MSDM_CBW;
 453                 ret = 13;
 454             }
 455             break;
 456
 457         case USB_MSDM_DATAIN:
 458             DPRINTF("Data in %zd/%d, scsi_len %d\n",
 459                     p->iov.size, s->data_len, s->scsi_len);
 460             if (s->scsi_len) {
 461                 usb_msd_copy_data(s, p);
 462             }
 463             if (le32_to_cpu(s->csw.residue)) {
 464                 int len = p->iov.size - p->result;
 465                 if (len) {
 466                     usb_packet_skip(p, len);
 467                     s->data_len -= len;
 468                     if (s->data_len == 0) {
 469                         s->mode = USB_MSDM_CSW;
 470                     }
 471                 }
 472             }
 473             if (p->result < p->iov.size) {
 474                 DPRINTF("Deferring packet %p\n", p);
 475                 s->packet = p;
 476                 ret = USB_RET_ASYNC;
 477             } else {
 478                 ret = p->result;
 479             }
 480             break;
 481
 482         default:
 483             DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
 484             goto fail;
 485         }
 486         break;
 487
 488     default:
 489         DPRINTF("Bad token\n");
 490     fail:
 491         ret = USB_RET_STALL;
 492         break;
 493     }
 494
 495     return ret;
 496 }
 497
 498 static void usb_msd_password_cb(void *opaque, int err)
 499 {
 500     MSDState *s = opaque;
 501
 502     if (!err)
 503         err = usb_device_attach(&s->dev);
 504
 505     if (err)
 506         qdev_unplug(&s->dev.qdev, NULL);
 507 }
 508
 509 static void *usb_msd_load_request(QEMUFile *f, SCSIRequest *req)
 510 {
 511     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 512
 513     /* nothing to load, just store req in our state struct */
 514     assert(s->req == NULL);
 515     scsi_req_ref(req);
 516     s->req = req;
 517     return NULL;
 518 }
 519
 520 static const struct SCSIBusInfo usb_msd_scsi_info = {
 521     .tcq = false,
 522     .max_target = 0,
 523     .max_lun = 0,
 524
 525     .transfer_data = usb_msd_transfer_data,
 526     .complete = usb_msd_command_complete,
 527     .cancel = usb_msd_request_cancelled,
 528     .load_request = usb_msd_load_request,
 529 };
 530
 531 static int usb_msd_initfn(USBDevice *dev)
 532 {
 533     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 534     BlockDriverState *bs = s->conf.bs;
 535     DriveInfo *dinfo;
 536
 537     if (!bs) {
 538         error_report("drive property not set");
 539         return -1;
 540     }
 541
 542     /*
 543      * Hack alert: this pretends to be a block device, but it's really
 544      * a SCSI bus that can serve only a single device, which it
 545      * creates automatically.  But first it needs to detach from its
 546      * blockdev, or else scsi_bus_legacy_add_drive() dies when it
 547      * attaches again.
 548      *
 549      * The hack is probably a bad idea.
 550      */
 551     bdrv_detach_dev(bs, &s->dev.qdev);
 552     s->conf.bs = NULL;
 553
 554     if (!s->serial) {
 555         /* try to fall back to value set with legacy -drive serial=... */
 556         dinfo = drive_get_by_blockdev(bs);
 557         if (*dinfo->serial) {
 558             s->serial = strdup(dinfo->serial);
 559         }
 560     }
 561     if (s->serial) {
 562         usb_desc_set_string(dev, STR_SERIALNUMBER, s->serial);
 563     } else {
 564         usb_desc_create_serial(dev);
 565     }
 566
 567     usb_desc_init(dev);
 568     scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info);
 569     s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable,
 570                                             s->conf.bootindex);
 571     if (!s->scsi_dev) {
 572         return -1;
 573     }
 574     s->bus.qbus.allow_hotplug = 0;
 575     usb_msd_handle_reset(dev);
 576
 577     if (bdrv_key_required(bs)) {
 578         if (cur_mon) {
 579             monitor_read_bdrv_key_start(cur_mon, bs, usb_msd_password_cb, s);
 580             s->dev.auto_attach = 0;
 581         } else {
 582             autostart = 0;
 583         }
 584     }
 585
 586     return 0;
 587 }
 588
 589 static USBDevice *usb_msd_init(USBBus *bus, const char *filename)
 590 {
 591     static int nr=0;
 592     char id[8];
 593     QemuOpts *opts;
 594     DriveInfo *dinfo;
 595     USBDevice *dev;
 596     const char *p1;
 597     char fmt[32];
 598
 599     /* parse -usbdevice disk: syntax into drive opts */
 600     snprintf(id, sizeof(id), "usb%d", nr++);
 601     opts = qemu_opts_create(qemu_find_opts("drive"), id, 0, NULL);
 602
 603     p1 = strchr(filename, ':');
 604     if (p1++) {
 605         const char *p2;
 606
 607         if (strstart(filename, "format=", &p2)) {
 608             int len = MIN(p1 - p2, sizeof(fmt));
 609             pstrcpy(fmt, len, p2);
 610             qemu_opt_set(opts, "format", fmt);
 611         } else if (*filename != ':') {
 612             printf("unrecognized USB mass-storage option %s\n", filename);
 613             return NULL;
 614         }
 615         filename = p1;
 616     }
 617     if (!*filename) {
 618         printf("block device specification needed\n");
 619         return NULL;
 620     }
 621     qemu_opt_set(opts, "file", filename);
 622     qemu_opt_set(opts, "if", "none");
 623
 624     /* create host drive */
 625     dinfo = drive_init(opts, 0);
 626     if (!dinfo) {
 627         qemu_opts_del(opts);
 628         return NULL;
 629     }
 630
 631     /* create guest device */
 632     dev = usb_create(bus, "usb-storage");
 633     if (!dev) {
 634         return NULL;
 635     }
 636     if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
 637         qdev_free(&dev->qdev);
 638         return NULL;
 639     }
 640     if (qdev_init(&dev->qdev) < 0)
 641         return NULL;
 642
 643     return dev;
 644 }
 645
 646 static const VMStateDescription vmstate_usb_msd = {
 647     .name = "usb-storage",
 648     .version_id = 1,
 649     .minimum_version_id = 1,
 650     .fields = (VMStateField []) {
 651         VMSTATE_USB_DEVICE(dev, MSDState),
 652         VMSTATE_UINT32(mode, MSDState),
 653         VMSTATE_UINT32(scsi_len, MSDState),
 654         VMSTATE_UINT32(scsi_off, MSDState),
 655         VMSTATE_UINT32(data_len, MSDState),
 656         VMSTATE_UINT32(csw.sig, MSDState),
 657         VMSTATE_UINT32(csw.tag, MSDState),
 658         VMSTATE_UINT32(csw.residue, MSDState),
 659         VMSTATE_UINT8(csw.status, MSDState),
 660         VMSTATE_END_OF_LIST()
 661     }
 662 };
 663
 664 static Property msd_properties[] = {
 665     DEFINE_BLOCK_PROPERTIES(MSDState, conf),
 666     DEFINE_PROP_STRING("serial", MSDState, serial),
 667     DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
 668     DEFINE_PROP_END_OF_LIST(),
 669 };
 670
 671 static void usb_msd_class_initfn(ObjectClass *klass, void *data)
 672 {
 673     DeviceClass *dc = DEVICE_CLASS(klass);
 674     USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
 675
 676     uc->init           = usb_msd_initfn;
 677     uc->product_desc   = "QEMU USB MSD";
 678     uc->usb_desc       = &desc;
 679     uc->cancel_packet  = usb_msd_cancel_io;
 680     uc->handle_attach  = usb_desc_attach;
 681     uc->handle_reset   = usb_msd_handle_reset;
 682     uc->handle_control = usb_msd_handle_control;
 683     uc->handle_data    = usb_msd_handle_data;
 684     dc->fw_name = "storage";
 685     dc->vmsd = &vmstate_usb_msd;
 686     dc->props = msd_properties;
 687 }
 688
 689 static TypeInfo msd_info = {
 690     .name          = "usb-storage",
 691     .parent        = TYPE_USB_DEVICE,
 692     .instance_size = sizeof(MSDState),
 693     .class_init    = usb_msd_class_initfn,
 694 };
 695
 696 static void usb_msd_register_types(void)
 697 {
 698     type_register_static(&msd_info);
 699     usb_legacy_register("usb-storage", "disk", usb_msd_init);
 700 }
 701
 702 type_init(usb_msd_register_types)