hw/vt82c686.c

   1 /*
   2  * VT82C686B south bridge support
   3  *
   4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
   5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
   6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
   7  * This code is licensed under the GNU GPL v2.
   8  *
   9  * Contributions after 2012-01-13 are licensed under the terms of the
  10  * GNU GPL, version 2 or (at your option) any later version.
  11  */
  12
  13 #include "hw/hw.h"
  14 #include "hw/i386/pc.h"
  15 #include "hw/isa/vt82c686.h"
  16 #include "hw/i2c/i2c.h"
  17 #include "hw/i2c/smbus.h"
  18 #include "hw/pci/pci.h"
  19 #include "hw/isa/isa.h"
  20 #include "hw/sysbus.h"
  21 #include "hw/mips/mips.h"
  22 #include "hw/isa/apm.h"
  23 #include "hw/acpi/acpi.h"
  24 #include "hw/i2c/pm_smbus.h"
  25 #include "sysemu/sysemu.h"
  26 #include "qemu/timer.h"
  27 #include "exec/address-spaces.h"
  28
  29 //#define DEBUG_VT82C686B
  30
  31 #ifdef DEBUG_VT82C686B
  32 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
  33 #else
  34 #define DPRINTF(fmt, ...)
  35 #endif
  36
  37 typedef struct SuperIOConfig
  38 {
  39     uint8_t config[0xff];
  40     uint8_t index;
  41     uint8_t data;
  42 } SuperIOConfig;
  43
  44 typedef struct VT82C686BState {
  45     PCIDevice dev;
  46     SuperIOConfig superio_conf;
  47 } VT82C686BState;
  48
  49 static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
  50 {
  51     int can_write;
  52     SuperIOConfig *superio_conf = opaque;
  53
  54     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
  55     if (addr == 0x3f0) {
  56         superio_conf->index = data & 0xff;
  57     } else {
  58         /* 0x3f1 */
  59         switch (superio_conf->index) {
  60         case 0x00 ... 0xdf:
  61         case 0xe4:
  62         case 0xe5:
  63         case 0xe9 ... 0xed:
  64         case 0xf3:
  65         case 0xf5:
  66         case 0xf7:
  67         case 0xf9 ... 0xfb:
  68         case 0xfd ... 0xff:
  69             can_write = 0;
  70             break;
  71         default:
  72             can_write = 1;
  73
  74             if (can_write) {
  75                 switch (superio_conf->index) {
  76                 case 0xe7:
  77                     if ((data & 0xff) != 0xfe) {
  78                         DPRINTF("chage uart 1 base. unsupported yet\n");
  79                     }
  80                     break;
  81                 case 0xe8:
  82                     if ((data & 0xff) != 0xbe) {
  83                         DPRINTF("chage uart 2 base. unsupported yet\n");
  84                     }
  85                     break;
  86
  87                 default:
  88                     superio_conf->config[superio_conf->index] = data & 0xff;
  89                 }
  90             }
  91         }
  92         superio_conf->config[superio_conf->index] = data & 0xff;
  93     }
  94 }
  95
  96 static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
  97 {
  98     SuperIOConfig *superio_conf = opaque;
  99
 100     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
 101     return (superio_conf->config[superio_conf->index]);
 102 }
 103
 104 static void vt82c686b_reset(void * opaque)
 105 {
 106     PCIDevice *d = opaque;
 107     uint8_t *pci_conf = d->config;
 108     VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
 109
 110     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
 111     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 112                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
 113     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 114
 115     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
 116     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
 117     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
 118     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
 119     pci_conf[0x59] = 0x04;
 120     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
 121     pci_conf[0x5f] = 0x04;
 122     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
 123
 124     vt82c->superio_conf.config[0xe0] = 0x3c;
 125     vt82c->superio_conf.config[0xe2] = 0x03;
 126     vt82c->superio_conf.config[0xe3] = 0xfc;
 127     vt82c->superio_conf.config[0xe6] = 0xde;
 128     vt82c->superio_conf.config[0xe7] = 0xfe;
 129     vt82c->superio_conf.config[0xe8] = 0xbe;
 130 }
 131
 132 /* write config pci function0 registers. PCI-ISA bridge */
 133 static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
 134                                    uint32_t val, int len)
 135 {
 136     VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);
 137
 138     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
 139            address, val, len);
 140
 141     pci_default_write_config(d, address, val, len);
 142     if (address == 0x85) {  /* enable or disable super IO configure */
 143         if (val & 0x2) {
 144             /* floppy also uses 0x3f0 and 0x3f1.
 145              * But we do not emulate flopy,so just set it here. */
 146             isa_unassign_ioport(0x3f0, 2);
 147             register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
 148                                  &vt686->superio_conf);
 149             register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
 150                                   &vt686->superio_conf);
 151         } else {
 152             isa_unassign_ioport(0x3f0, 2);
 153         }
 154     }
 155 }
 156
 157 #define ACPI_DBG_IO_ADDR  0xb044
 158
 159 typedef struct VT686PMState {
 160     PCIDevice dev;
 161     MemoryRegion io;
 162     ACPIREGS ar;
 163     APMState apm;
 164     PMSMBus smb;
 165     uint32_t smb_io_base;
 166 } VT686PMState;
 167
 168 typedef struct VT686AC97State {
 169     PCIDevice dev;
 170 } VT686AC97State;
 171
 172 typedef struct VT686MC97State {
 173     PCIDevice dev;
 174 } VT686MC97State;
 175
 176 static void pm_update_sci(VT686PMState *s)
 177 {
 178     int sci_level, pmsts;
 179
 180     pmsts = acpi_pm1_evt_get_sts(&s->ar);
 181     sci_level = (((pmsts & s->ar.pm1.evt.en) &
 182                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
 183                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
 184                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
 185                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
 186     qemu_set_irq(s->dev.irq[0], sci_level);
 187     /* schedule a timer interruption if needed */
 188     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
 189                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
 190 }
 191
 192 static void pm_tmr_timer(ACPIREGS *ar)
 193 {
 194     VT686PMState *s = container_of(ar, VT686PMState, ar);
 195     pm_update_sci(s);
 196 }
 197
 198 static void pm_io_space_update(VT686PMState *s)
 199 {
 200     uint32_t pm_io_base;
 201
 202     pm_io_base = pci_get_long(s->dev.config + 0x40);
 203     pm_io_base &= 0xffc0;
 204
 205     memory_region_transaction_begin();
 206     memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
 207     memory_region_set_address(&s->io, pm_io_base);
 208     memory_region_transaction_commit();
 209 }
 210
 211 static void pm_write_config(PCIDevice *d,
 212                             uint32_t address, uint32_t val, int len)
 213 {
 214     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
 215            address, val, len);
 216     pci_default_write_config(d, address, val, len);
 217 }
 218
 219 static int vmstate_acpi_post_load(void *opaque, int version_id)
 220 {
 221     VT686PMState *s = opaque;
 222
 223     pm_io_space_update(s);
 224     return 0;
 225 }
 226
 227 static const VMStateDescription vmstate_acpi = {
 228     .name = "vt82c686b_pm",
 229     .version_id = 1,
 230     .minimum_version_id = 1,
 231     .minimum_version_id_old = 1,
 232     .post_load = vmstate_acpi_post_load,
 233     .fields      = (VMStateField []) {
 234         VMSTATE_PCI_DEVICE(dev, VT686PMState),
 235         VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
 236         VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
 237         VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
 238         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
 239         VMSTATE_TIMER(ar.tmr.timer, VT686PMState),
 240         VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
 241         VMSTATE_END_OF_LIST()
 242     }
 243 };
 244
 245 /*
 246  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
 247  * just register a PCI device now, functionalities will be implemented later.
 248  */
 249
 250 static int vt82c686b_ac97_initfn(PCIDevice *dev)
 251 {
 252     VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev);
 253     uint8_t *pci_conf = s->dev.config;
 254
 255     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 256                  PCI_COMMAND_PARITY);
 257     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
 258                  PCI_STATUS_DEVSEL_MEDIUM);
 259     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 260
 261     return 0;
 262 }
 263
 264 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
 265 {
 266     PCIDevice *dev;
 267
 268     dev = pci_create(bus, devfn, "VT82C686B_AC97");
 269     qdev_init_nofail(&dev->qdev);
 270 }
 271
 272 static void via_ac97_class_init(ObjectClass *klass, void *data)
 273 {
 274     DeviceClass *dc = DEVICE_CLASS(klass);
 275     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 276
 277     k->init = vt82c686b_ac97_initfn;
 278     k->vendor_id = PCI_VENDOR_ID_VIA;
 279     k->device_id = PCI_DEVICE_ID_VIA_AC97;
 280     k->revision = 0x50;
 281     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
 282     dc->desc = "AC97";
 283 }
 284
 285 static const TypeInfo via_ac97_info = {
 286     .name          = "VT82C686B_AC97",
 287     .parent        = TYPE_PCI_DEVICE,
 288     .instance_size = sizeof(VT686AC97State),
 289     .class_init    = via_ac97_class_init,
 290 };
 291
 292 static int vt82c686b_mc97_initfn(PCIDevice *dev)
 293 {
 294     VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev);
 295     uint8_t *pci_conf = s->dev.config;
 296
 297     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 298                  PCI_COMMAND_VGA_PALETTE);
 299     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 300     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 301
 302     return 0;
 303 }
 304
 305 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
 306 {
 307     PCIDevice *dev;
 308
 309     dev = pci_create(bus, devfn, "VT82C686B_MC97");
 310     qdev_init_nofail(&dev->qdev);
 311 }
 312
 313 static void via_mc97_class_init(ObjectClass *klass, void *data)
 314 {
 315     DeviceClass *dc = DEVICE_CLASS(klass);
 316     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 317
 318     k->init = vt82c686b_mc97_initfn;
 319     k->vendor_id = PCI_VENDOR_ID_VIA;
 320     k->device_id = PCI_DEVICE_ID_VIA_MC97;
 321     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
 322     k->revision = 0x30;
 323     dc->desc = "MC97";
 324 }
 325
 326 static const TypeInfo via_mc97_info = {
 327     .name          = "VT82C686B_MC97",
 328     .parent        = TYPE_PCI_DEVICE,
 329     .instance_size = sizeof(VT686MC97State),
 330     .class_init    = via_mc97_class_init,
 331 };
 332
 333 /* vt82c686 pm init */
 334 static int vt82c686b_pm_initfn(PCIDevice *dev)
 335 {
 336     VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);
 337     uint8_t *pci_conf;
 338
 339     pci_conf = s->dev.config;
 340     pci_set_word(pci_conf + PCI_COMMAND, 0);
 341     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
 342                  PCI_STATUS_DEVSEL_MEDIUM);
 343
 344     /* 0x48-0x4B is Power Management I/O Base */
 345     pci_set_long(pci_conf + 0x48, 0x00000001);
 346
 347     /* SMB ports:0xeee0~0xeeef */
 348     s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
 349     pci_conf[0x90] = s->smb_io_base | 1;
 350     pci_conf[0x91] = s->smb_io_base >> 8;
 351     pci_conf[0xd2] = 0x90;
 352     pm_smbus_init(&s->dev.qdev, &s->smb);
 353     memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
 354
 355     apm_init(dev, &s->apm, NULL, s);
 356
 357     memory_region_init(&s->io, "vt82c686-pm", 64);
 358     memory_region_set_enabled(&s->io, false);
 359     memory_region_add_subregion(get_system_io(), 0, &s->io);
 360
 361     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
 362     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
 363     acpi_pm1_cnt_init(&s->ar, &s->io, 2);
 364
 365     return 0;
 366 }
 367
 368 i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 369                        qemu_irq sci_irq)
 370 {
 371     PCIDevice *dev;
 372     VT686PMState *s;
 373
 374     dev = pci_create(bus, devfn, "VT82C686B_PM");
 375     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
 376
 377     s = DO_UPCAST(VT686PMState, dev, dev);
 378
 379     qdev_init_nofail(&dev->qdev);
 380
 381     return s->smb.smbus;
 382 }
 383
 384 static Property via_pm_properties[] = {
 385     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
 386     DEFINE_PROP_END_OF_LIST(),
 387 };
 388
 389 static void via_pm_class_init(ObjectClass *klass, void *data)
 390 {
 391     DeviceClass *dc = DEVICE_CLASS(klass);
 392     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 393
 394     k->init = vt82c686b_pm_initfn;
 395     k->config_write = pm_write_config;
 396     k->vendor_id = PCI_VENDOR_ID_VIA;
 397     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
 398     k->class_id = PCI_CLASS_BRIDGE_OTHER;
 399     k->revision = 0x40;
 400     dc->desc = "PM";
 401     dc->vmsd = &vmstate_acpi;
 402     dc->props = via_pm_properties;
 403 }
 404
 405 static const TypeInfo via_pm_info = {
 406     .name          = "VT82C686B_PM",
 407     .parent        = TYPE_PCI_DEVICE,
 408     .instance_size = sizeof(VT686PMState),
 409     .class_init    = via_pm_class_init,
 410 };
 411
 412 static const VMStateDescription vmstate_via = {
 413     .name = "vt82c686b",
 414     .version_id = 1,
 415     .minimum_version_id = 1,
 416     .minimum_version_id_old = 1,
 417     .fields      = (VMStateField []) {
 418         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
 419         VMSTATE_END_OF_LIST()
 420     }
 421 };
 422
 423 /* init the PCI-to-ISA bridge */
 424 static int vt82c686b_initfn(PCIDevice *d)
 425 {
 426     uint8_t *pci_conf;
 427     uint8_t *wmask;
 428     int i;
 429
 430     isa_bus_new(&d->qdev, pci_address_space_io(d));
 431
 432     pci_conf = d->config;
 433     pci_config_set_prog_interface(pci_conf, 0x0);
 434
 435     wmask = d->wmask;
 436     for (i = 0x00; i < 0xff; i++) {
 437        if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
 438            wmask[i] = 0x00;
 439        }
 440     }
 441
 442     qemu_register_reset(vt82c686b_reset, d);
 443
 444     return 0;
 445 }
 446
 447 ISABus *vt82c686b_init(PCIBus *bus, int devfn)
 448 {
 449     PCIDevice *d;
 450
 451     d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B");
 452
 453     return DO_UPCAST(ISABus, qbus, qdev_get_child_bus(&d->qdev, "isa.0"));
 454 }
 455
 456 static void via_class_init(ObjectClass *klass, void *data)
 457 {
 458     DeviceClass *dc = DEVICE_CLASS(klass);
 459     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 460
 461     k->init = vt82c686b_initfn;
 462     k->config_write = vt82c686b_write_config;
 463     k->vendor_id = PCI_VENDOR_ID_VIA;
 464     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
 465     k->class_id = PCI_CLASS_BRIDGE_ISA;
 466     k->revision = 0x40;
 467     dc->desc = "ISA bridge";
 468     dc->no_user = 1;
 469     dc->vmsd = &vmstate_via;
 470 }
 471
 472 static const TypeInfo via_info = {
 473     .name          = "VT82C686B",
 474     .parent        = TYPE_PCI_DEVICE,
 475     .instance_size = sizeof(VT82C686BState),
 476     .class_init    = via_class_init,
 477 };
 478
 479 static void vt82c686b_register_types(void)
 480 {
 481     type_register_static(&via_ac97_info);
 482     type_register_static(&via_mc97_info);
 483     type_register_static(&via_pm_info);
 484     type_register_static(&via_info);
 485 }
 486
 487 type_init(vt82c686b_register_types)