hw/vt82c686.c

   1 /*
   2  * VT82C686B south bridge support
   3  *
   4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
   5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
   6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
   7  * This code is licensed under the GNU GPL v2.
   8  *
   9  * Contributions after 2012-01-13 are licensed under the terms of the
  10  * GNU GPL, version 2 or (at your option) any later version.
  11  */
  12
  13 #include "hw.h"
  14 #include "pc.h"
  15 #include "vt82c686.h"
  16 #include "i2c.h"
  17 #include "smbus.h"
  18 #include "pci.h"
  19 #include "isa.h"
  20 #include "sysbus.h"
  21 #include "mips.h"
  22 #include "apm.h"
  23 #include "acpi.h"
  24 #include "pm_smbus.h"
  25 #include "sysemu.h"
  26 #include "qemu-timer.h"
  27
  28 typedef uint32_t pci_addr_t;
  29 #include "pci_host.h"
  30 //#define DEBUG_VT82C686B
  31
  32 #ifdef DEBUG_VT82C686B
  33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
  34 #else
  35 #define DPRINTF(fmt, ...)
  36 #endif
  37
  38 typedef struct SuperIOConfig
  39 {
  40     uint8_t config[0xff];
  41     uint8_t index;
  42     uint8_t data;
  43 } SuperIOConfig;
  44
  45 typedef struct VT82C686BState {
  46     PCIDevice dev;
  47     SuperIOConfig superio_conf;
  48 } VT82C686BState;
  49
  50 static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
  51 {
  52     int can_write;
  53     SuperIOConfig *superio_conf = opaque;
  54
  55     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
  56     if (addr == 0x3f0) {
  57         superio_conf->index = data & 0xff;
  58     } else {
  59         /* 0x3f1 */
  60         switch (superio_conf->index) {
  61         case 0x00 ... 0xdf:
  62         case 0xe4:
  63         case 0xe5:
  64         case 0xe9 ... 0xed:
  65         case 0xf3:
  66         case 0xf5:
  67         case 0xf7:
  68         case 0xf9 ... 0xfb:
  69         case 0xfd ... 0xff:
  70             can_write = 0;
  71             break;
  72         default:
  73             can_write = 1;
  74
  75             if (can_write) {
  76                 switch (superio_conf->index) {
  77                 case 0xe7:
  78                     if ((data & 0xff) != 0xfe) {
  79                         DPRINTF("chage uart 1 base. unsupported yet\n");
  80                     }
  81                     break;
  82                 case 0xe8:
  83                     if ((data & 0xff) != 0xbe) {
  84                         DPRINTF("chage uart 2 base. unsupported yet\n");
  85                     }
  86                     break;
  87
  88                 default:
  89                     superio_conf->config[superio_conf->index] = data & 0xff;
  90                 }
  91             }
  92         }
  93         superio_conf->config[superio_conf->index] = data & 0xff;
  94     }
  95 }
  96
  97 static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
  98 {
  99     SuperIOConfig *superio_conf = opaque;
 100
 101     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
 102     return (superio_conf->config[superio_conf->index]);
 103 }
 104
 105 static void vt82c686b_reset(void * opaque)
 106 {
 107     PCIDevice *d = opaque;
 108     uint8_t *pci_conf = d->config;
 109     VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
 110
 111     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
 112     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 113                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
 114     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 115
 116     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
 117     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
 118     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
 119     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
 120     pci_conf[0x59] = 0x04;
 121     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
 122     pci_conf[0x5f] = 0x04;
 123     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
 124
 125     vt82c->superio_conf.config[0xe0] = 0x3c;
 126     vt82c->superio_conf.config[0xe2] = 0x03;
 127     vt82c->superio_conf.config[0xe3] = 0xfc;
 128     vt82c->superio_conf.config[0xe6] = 0xde;
 129     vt82c->superio_conf.config[0xe7] = 0xfe;
 130     vt82c->superio_conf.config[0xe8] = 0xbe;
 131 }
 132
 133 /* write config pci function0 registers. PCI-ISA bridge */
 134 static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
 135                                    uint32_t val, int len)
 136 {
 137     VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);
 138
 139     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
 140            address, val, len);
 141
 142     pci_default_write_config(d, address, val, len);
 143     if (address == 0x85) {  /* enable or disable super IO configure */
 144         if (val & 0x2) {
 145             /* floppy also uses 0x3f0 and 0x3f1.
 146              * But we do not emulate flopy,so just set it here. */
 147             isa_unassign_ioport(0x3f0, 2);
 148             register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
 149                                  &vt686->superio_conf);
 150             register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
 151                                   &vt686->superio_conf);
 152         } else {
 153             isa_unassign_ioport(0x3f0, 2);
 154         }
 155     }
 156 }
 157
 158 #define ACPI_DBG_IO_ADDR  0xb044
 159
 160 typedef struct VT686PMState {
 161     PCIDevice dev;
 162     ACPIPM1EVT pm1a;
 163     ACPIPM1CNT pm1_cnt;
 164     APMState apm;
 165     ACPIPMTimer tmr;
 166     PMSMBus smb;
 167     uint32_t smb_io_base;
 168 } VT686PMState;
 169
 170 typedef struct VT686AC97State {
 171     PCIDevice dev;
 172 } VT686AC97State;
 173
 174 typedef struct VT686MC97State {
 175     PCIDevice dev;
 176 } VT686MC97State;
 177
 178 static void pm_update_sci(VT686PMState *s)
 179 {
 180     int sci_level, pmsts;
 181
 182     pmsts = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
 183     sci_level = (((pmsts & s->pm1a.en) &
 184                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
 185                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
 186                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
 187                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
 188     qemu_set_irq(s->dev.irq[0], sci_level);
 189     /* schedule a timer interruption if needed */
 190     acpi_pm_tmr_update(&s->tmr, (s->pm1a.en & ACPI_BITMASK_TIMER_ENABLE) &&
 191                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
 192 }
 193
 194 static void pm_tmr_timer(ACPIPMTimer *tmr)
 195 {
 196     VT686PMState *s = container_of(tmr, VT686PMState, tmr);
 197     pm_update_sci(s);
 198 }
 199
 200 static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
 201 {
 202     VT686PMState *s = opaque;
 203
 204     addr &= 0x0f;
 205     switch (addr) {
 206     case 0x00:
 207         acpi_pm1_evt_write_sts(&s->pm1a, &s->tmr, val);
 208         pm_update_sci(s);
 209         break;
 210     case 0x02:
 211         s->pm1a.en = val;
 212         pm_update_sci(s);
 213         break;
 214     case 0x04:
 215         acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
 216         break;
 217     default:
 218         break;
 219     }
 220     DPRINTF("PM writew port=0x%04x val=0x%02x\n", addr, val);
 221 }
 222
 223 static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
 224 {
 225     VT686PMState *s = opaque;
 226     uint32_t val;
 227
 228     addr &= 0x0f;
 229     switch (addr) {
 230     case 0x00:
 231         val = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
 232         break;
 233     case 0x02:
 234         val = s->pm1a.en;
 235         break;
 236     case 0x04:
 237         val = s->pm1_cnt.cnt;
 238         break;
 239     default:
 240         val = 0;
 241         break;
 242     }
 243     DPRINTF("PM readw port=0x%04x val=0x%02x\n", addr, val);
 244     return val;
 245 }
 246
 247 static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
 248 {
 249     addr &= 0x0f;
 250     DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr, val);
 251 }
 252
 253 static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
 254 {
 255     VT686PMState *s = opaque;
 256     uint32_t val;
 257
 258     addr &= 0x0f;
 259     switch (addr) {
 260     case 0x08:
 261         val = acpi_pm_tmr_get(&s->tmr);
 262         break;
 263     default:
 264         val = 0;
 265         break;
 266     }
 267     DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
 268     return val;
 269 }
 270
 271 static void pm_io_space_update(VT686PMState *s)
 272 {
 273     uint32_t pm_io_base;
 274
 275     if (s->dev.config[0x80] & 1) {
 276         pm_io_base = pci_get_long(s->dev.config + 0x40);
 277         pm_io_base &= 0xffc0;
 278
 279         /* XXX: need to improve memory and ioport allocation */
 280         DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
 281         register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
 282         register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
 283         register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
 284         register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
 285     }
 286 }
 287
 288 static void pm_write_config(PCIDevice *d,
 289                             uint32_t address, uint32_t val, int len)
 290 {
 291     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
 292            address, val, len);
 293     pci_default_write_config(d, address, val, len);
 294 }
 295
 296 static int vmstate_acpi_post_load(void *opaque, int version_id)
 297 {
 298     VT686PMState *s = opaque;
 299
 300     pm_io_space_update(s);
 301     return 0;
 302 }
 303
 304 static const VMStateDescription vmstate_acpi = {
 305     .name = "vt82c686b_pm",
 306     .version_id = 1,
 307     .minimum_version_id = 1,
 308     .minimum_version_id_old = 1,
 309     .post_load = vmstate_acpi_post_load,
 310     .fields      = (VMStateField []) {
 311         VMSTATE_PCI_DEVICE(dev, VT686PMState),
 312         VMSTATE_UINT16(pm1a.sts, VT686PMState),
 313         VMSTATE_UINT16(pm1a.en, VT686PMState),
 314         VMSTATE_UINT16(pm1_cnt.cnt, VT686PMState),
 315         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
 316         VMSTATE_TIMER(tmr.timer, VT686PMState),
 317         VMSTATE_INT64(tmr.overflow_time, VT686PMState),
 318         VMSTATE_END_OF_LIST()
 319     }
 320 };
 321
 322 /*
 323  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
 324  * just register a PCI device now, functionalities will be implemented later.
 325  */
 326
 327 static int vt82c686b_ac97_initfn(PCIDevice *dev)
 328 {
 329     VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev);
 330     uint8_t *pci_conf = s->dev.config;
 331
 332     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 333                  PCI_COMMAND_PARITY);
 334     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
 335                  PCI_STATUS_DEVSEL_MEDIUM);
 336     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 337
 338     return 0;
 339 }
 340
 341 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
 342 {
 343     PCIDevice *dev;
 344
 345     dev = pci_create(bus, devfn, "VT82C686B_AC97");
 346     qdev_init_nofail(&dev->qdev);
 347 }
 348
 349 static void via_ac97_class_init(ObjectClass *klass, void *data)
 350 {
 351     DeviceClass *dc = DEVICE_CLASS(klass);
 352     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 353
 354     k->init = vt82c686b_ac97_initfn;
 355     k->vendor_id = PCI_VENDOR_ID_VIA;
 356     k->device_id = PCI_DEVICE_ID_VIA_AC97;
 357     k->revision = 0x50;
 358     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
 359     dc->desc = "AC97";
 360 }
 361
 362 static TypeInfo via_ac97_info = {
 363     .name          = "VT82C686B_AC97",
 364     .parent        = TYPE_PCI_DEVICE,
 365     .instance_size = sizeof(VT686AC97State),
 366     .class_init    = via_ac97_class_init,
 367 };
 368
 369 static int vt82c686b_mc97_initfn(PCIDevice *dev)
 370 {
 371     VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev);
 372     uint8_t *pci_conf = s->dev.config;
 373
 374     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 375                  PCI_COMMAND_VGA_PALETTE);
 376     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 377     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 378
 379     return 0;
 380 }
 381
 382 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
 383 {
 384     PCIDevice *dev;
 385
 386     dev = pci_create(bus, devfn, "VT82C686B_MC97");
 387     qdev_init_nofail(&dev->qdev);
 388 }
 389
 390 static void via_mc97_class_init(ObjectClass *klass, void *data)
 391 {
 392     DeviceClass *dc = DEVICE_CLASS(klass);
 393     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 394
 395     k->init = vt82c686b_mc97_initfn;
 396     k->vendor_id = PCI_VENDOR_ID_VIA;
 397     k->device_id = PCI_DEVICE_ID_VIA_MC97;
 398     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
 399     k->revision = 0x30;
 400     dc->desc = "MC97";
 401 }
 402
 403 static TypeInfo via_mc97_info = {
 404     .name          = "VT82C686B_MC97",
 405     .parent        = TYPE_PCI_DEVICE,
 406     .instance_size = sizeof(VT686MC97State),
 407     .class_init    = via_mc97_class_init,
 408 };
 409
 410 /* vt82c686 pm init */
 411 static int vt82c686b_pm_initfn(PCIDevice *dev)
 412 {
 413     VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);
 414     uint8_t *pci_conf;
 415
 416     pci_conf = s->dev.config;
 417     pci_set_word(pci_conf + PCI_COMMAND, 0);
 418     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
 419                  PCI_STATUS_DEVSEL_MEDIUM);
 420
 421     /* 0x48-0x4B is Power Management I/O Base */
 422     pci_set_long(pci_conf + 0x48, 0x00000001);
 423
 424     /* SMB ports:0xeee0~0xeeef */
 425     s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
 426     pci_conf[0x90] = s->smb_io_base | 1;
 427     pci_conf[0x91] = s->smb_io_base >> 8;
 428     pci_conf[0xd2] = 0x90;
 429     register_ioport_write(s->smb_io_base, 0xf, 1, smb_ioport_writeb, &s->smb);
 430     register_ioport_read(s->smb_io_base, 0xf, 1, smb_ioport_readb, &s->smb);
 431
 432     apm_init(&s->apm, NULL, s);
 433
 434     acpi_pm_tmr_init(&s->tmr, pm_tmr_timer);
 435     acpi_pm1_cnt_init(&s->pm1_cnt, NULL);
 436
 437     pm_smbus_init(&s->dev.qdev, &s->smb);
 438
 439     return 0;
 440 }
 441
 442 i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 443                        qemu_irq sci_irq)
 444 {
 445     PCIDevice *dev;
 446     VT686PMState *s;
 447
 448     dev = pci_create(bus, devfn, "VT82C686B_PM");
 449     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
 450
 451     s = DO_UPCAST(VT686PMState, dev, dev);
 452
 453     qdev_init_nofail(&dev->qdev);
 454
 455     return s->smb.smbus;
 456 }
 457
 458 static Property via_pm_properties[] = {
 459     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
 460     DEFINE_PROP_END_OF_LIST(),
 461 };
 462
 463 static void via_pm_class_init(ObjectClass *klass, void *data)
 464 {
 465     DeviceClass *dc = DEVICE_CLASS(klass);
 466     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 467
 468     k->init = vt82c686b_pm_initfn;
 469     k->config_write = pm_write_config;
 470     k->vendor_id = PCI_VENDOR_ID_VIA;
 471     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
 472     k->class_id = PCI_CLASS_BRIDGE_OTHER;
 473     k->revision = 0x40;
 474     dc->desc = "PM";
 475     dc->vmsd = &vmstate_acpi;
 476     dc->props = via_pm_properties;
 477 }
 478
 479 static TypeInfo via_pm_info = {
 480     .name          = "VT82C686B_PM",
 481     .parent        = TYPE_PCI_DEVICE,
 482     .instance_size = sizeof(VT686PMState),
 483     .class_init    = via_pm_class_init,
 484 };
 485
 486 static const VMStateDescription vmstate_via = {
 487     .name = "vt82c686b",
 488     .version_id = 1,
 489     .minimum_version_id = 1,
 490     .minimum_version_id_old = 1,
 491     .fields      = (VMStateField []) {
 492         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
 493         VMSTATE_END_OF_LIST()
 494     }
 495 };
 496
 497 /* init the PCI-to-ISA bridge */
 498 static int vt82c686b_initfn(PCIDevice *d)
 499 {
 500     uint8_t *pci_conf;
 501     uint8_t *wmask;
 502     int i;
 503
 504     isa_bus_new(&d->qdev, pci_address_space_io(d));
 505
 506     pci_conf = d->config;
 507     pci_config_set_prog_interface(pci_conf, 0x0);
 508
 509     wmask = d->wmask;
 510     for (i = 0x00; i < 0xff; i++) {
 511        if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
 512            wmask[i] = 0x00;
 513        }
 514     }
 515
 516     qemu_register_reset(vt82c686b_reset, d);
 517
 518     return 0;
 519 }
 520
 521 ISABus *vt82c686b_init(PCIBus *bus, int devfn)
 522 {
 523     PCIDevice *d;
 524
 525     d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B");
 526
 527     return DO_UPCAST(ISABus, qbus, qdev_get_child_bus(&d->qdev, "isa.0"));
 528 }
 529
 530 static void via_class_init(ObjectClass *klass, void *data)
 531 {
 532     DeviceClass *dc = DEVICE_CLASS(klass);
 533     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 534
 535     k->init = vt82c686b_initfn;
 536     k->config_write = vt82c686b_write_config;
 537     k->vendor_id = PCI_VENDOR_ID_VIA;
 538     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
 539     k->class_id = PCI_CLASS_BRIDGE_ISA;
 540     k->revision = 0x40;
 541     dc->desc = "ISA bridge";
 542     dc->no_user = 1;
 543     dc->vmsd = &vmstate_via;
 544 }
 545
 546 static TypeInfo via_info = {
 547     .name          = "VT82C686B",
 548     .parent        = TYPE_PCI_DEVICE,
 549     .instance_size = sizeof(VT82C686BState),
 550     .class_init    = via_class_init,
 551 };
 552
 553 static void vt82c686b_register_types(void)
 554 {
 555     type_register_static(&via_ac97_info);
 556     type_register_static(&via_mc97_info);
 557     type_register_static(&via_pm_info);
 558     type_register_static(&via_info);
 559 }
 560
 561 type_init(vt82c686b_register_types)