include/acpi/acconfig.h

   1 /******************************************************************************
   2  *
   3  * Name: acconfig.h - Global configuration constants
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2017, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef _ACCONFIG_H
  45 #define _ACCONFIG_H
  46
  47 /******************************************************************************
  48  *
  49  * Configuration options
  50  *
  51  *****************************************************************************/
  52
  53 /*
  54  * ACPI_DEBUG_OUTPUT    - This switch enables all the debug facilities of the
  55  *                        ACPI subsystem.  This includes the DEBUG_PRINT output
  56  *                        statements.  When disabled, all DEBUG_PRINT
  57  *                        statements are compiled out.
  58  *
  59  * ACPI_APPLICATION     - Use this switch if the subsystem is going to be run
  60  *                        at the application level.
  61  *
  62  */
  63
  64 /*
  65  * OS name, used for the _OS object.  The _OS object is essentially obsolete,
  66  * but there is a large base of ASL/AML code in existing machines that check
  67  * for the string below.  The use of this string usually guarantees that
  68  * the ASL will execute down the most tested code path.  Also, there is some
  69  * code that will not execute the _OSI method unless _OS matches the string
  70  * below.  Therefore, change this string at your own risk.
  71  */
  72 #define ACPI_OS_NAME                    "Microsoft Windows NT"
  73
  74 /* Maximum objects in the various object caches */
  75
  76 #define ACPI_MAX_STATE_CACHE_DEPTH      96      /* State objects */
  77 #define ACPI_MAX_PARSE_CACHE_DEPTH      96      /* Parse tree objects */
  78 #define ACPI_MAX_EXTPARSE_CACHE_DEPTH   96      /* Parse tree objects */
  79 #define ACPI_MAX_OBJECT_CACHE_DEPTH     96      /* Interpreter operand objects */
  80 #define ACPI_MAX_NAMESPACE_CACHE_DEPTH  96      /* Namespace objects */
  81 #define ACPI_MAX_COMMENT_CACHE_DEPTH    96      /* Comments for the -ca option */
  82
  83 /*
  84  * Should the subsystem abort the loading of an ACPI table if the
  85  * table checksum is incorrect?
  86  */
  87 #ifndef ACPI_CHECKSUM_ABORT
  88 #define ACPI_CHECKSUM_ABORT             FALSE
  89 #endif
  90
  91 /*
  92  * Generate a version of ACPICA that only supports "reduced hardware"
  93  * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
  94  * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
  95  * model. In other words, no ACPI hardware is supported.
  96  *
  97  * If TRUE, this means no support for the following:
  98  *      PM Event and Control registers
  99  *      SCI interrupt (and handler)
 100  *      Fixed Events
 101  *      General Purpose Events (GPEs)
 102  *      Global Lock
 103  *      ACPI PM timer
 104  *      FACS table (Waking vectors and Global Lock)
 105  */
 106 #ifndef ACPI_REDUCED_HARDWARE
 107 #define ACPI_REDUCED_HARDWARE           FALSE
 108 #endif
 109
 110 /******************************************************************************
 111  *
 112  * Subsystem Constants
 113  *
 114  *****************************************************************************/
 115
 116 /* Version of ACPI supported */
 117
 118 #define ACPI_CA_SUPPORT_LEVEL           5
 119
 120 /* Maximum count for a semaphore object */
 121
 122 #define ACPI_MAX_SEMAPHORE_COUNT        256
 123
 124 /* Maximum object reference count (detects object deletion issues) */
 125
 126 #define ACPI_MAX_REFERENCE_COUNT        0x4000
 127
 128 /* Default page size for use in mapping memory for operation regions */
 129
 130 #define ACPI_DEFAULT_PAGE_SIZE          4096    /* Must be power of 2 */
 131
 132 /* owner_id tracking. 8 entries allows for 255 owner_ids */
 133
 134 #define ACPI_NUM_OWNERID_MASKS          8
 135
 136 /* Size of the root table array is increased by this increment */
 137
 138 #define ACPI_ROOT_TABLE_SIZE_INCREMENT  4
 139
 140 /* Maximum sleep allowed via Sleep() operator */
 141
 142 #define ACPI_MAX_SLEEP                  2000    /* 2000 millisec == two seconds */
 143
 144 /* Address Range lists are per-space_id (Memory and I/O only) */
 145
 146 #define ACPI_ADDRESS_RANGE_MAX          2
 147
 148 /* Maximum number of While() loops before abort */
 149
 150 #define ACPI_MAX_LOOP_COUNT             0x000FFFFF
 151
 152 /******************************************************************************
 153  *
 154  * ACPI Specification constants (Do not change unless the specification changes)
 155  *
 156  *****************************************************************************/
 157
 158 /* Method info (in WALK_STATE), containing local variables and argumetns */
 159
 160 #define ACPI_METHOD_NUM_LOCALS          8
 161 #define ACPI_METHOD_MAX_LOCAL           7
 162
 163 #define ACPI_METHOD_NUM_ARGS            7
 164 #define ACPI_METHOD_MAX_ARG             6
 165
 166 /*
 167  * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
 168  */
 169 #define ACPI_OBJ_NUM_OPERANDS           8
 170 #define ACPI_OBJ_MAX_OPERAND            7
 171
 172 /* Number of elements in the Result Stack frame, can be an arbitrary value */
 173
 174 #define ACPI_RESULTS_FRAME_OBJ_NUM      8
 175
 176 /*
 177  * Maximal number of elements the Result Stack can contain,
 178  * it may be an arbitray value not exceeding the types of
 179  * result_size and result_count (now u8).
 180  */
 181 #define ACPI_RESULTS_OBJ_NUM_MAX        255
 182
 183 /* Constants used in searching for the RSDP in low memory */
 184
 185 #define ACPI_EBDA_PTR_LOCATION          0x0000040E      /* Physical Address */
 186 #define ACPI_EBDA_PTR_LENGTH            2
 187 #define ACPI_EBDA_WINDOW_SIZE           1024
 188 #define ACPI_HI_RSDP_WINDOW_BASE        0x000E0000      /* Physical Address */
 189 #define ACPI_HI_RSDP_WINDOW_SIZE        0x00020000
 190 #define ACPI_RSDP_SCAN_STEP             16
 191
 192 /* Operation regions */
 193
 194 #define ACPI_USER_REGION_BEGIN          0x80
 195
 196 /* Maximum space_ids for Operation Regions */
 197
 198 #define ACPI_MAX_ADDRESS_SPACE          255
 199 #define ACPI_NUM_DEFAULT_SPACES         4
 200
 201 /* Array sizes.  Used for range checking also */
 202
 203 #define ACPI_MAX_MATCH_OPCODE           5
 204
 205 /* RSDP checksums */
 206
 207 #define ACPI_RSDP_CHECKSUM_LENGTH       20
 208 #define ACPI_RSDP_XCHECKSUM_LENGTH      36
 209
 210 /* SMBus, GSBus and IPMI bidirectional buffer size */
 211
 212 #define ACPI_SMBUS_BUFFER_SIZE          34
 213 #define ACPI_GSBUS_BUFFER_SIZE          34
 214 #define ACPI_IPMI_BUFFER_SIZE           66
 215
 216 /* _sx_d and _sx_w control methods */
 217
 218 #define ACPI_NUM_sx_d_METHODS           4
 219 #define ACPI_NUM_sx_w_METHODS           5
 220
 221 /******************************************************************************
 222  *
 223  * Miscellaneous constants
 224  *
 225  *****************************************************************************/
 226
 227 /* UUID constants */
 228
 229 #define UUID_BUFFER_LENGTH          16  /* Length of UUID in memory */
 230 #define UUID_STRING_LENGTH          36  /* Total length of a UUID string */
 231
 232 /* Positions for required hyphens (dashes) in UUID strings */
 233
 234 #define UUID_HYPHEN1_OFFSET         8
 235 #define UUID_HYPHEN2_OFFSET         13
 236 #define UUID_HYPHEN3_OFFSET         18
 237 #define UUID_HYPHEN4_OFFSET         23
 238
 239 /******************************************************************************
 240  *
 241  * ACPI AML Debugger
 242  *
 243  *****************************************************************************/
 244
 245 #define ACPI_DEBUGGER_MAX_ARGS          ACPI_METHOD_NUM_ARGS + 4        /* Max command line arguments */
 246 #define ACPI_DB_LINE_BUFFER_SIZE        512
 247
 248 #define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
 249 #define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
 250
 251 #endif                          /* _ACCONFIG_H */