]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/acpi/actypes.h
futex: Replace PF_EXITPIDONE with a state
[mirror_ubuntu-bionic-kernel.git] / include / acpi / actypes.h
1 /******************************************************************************
2 *
3 * Name: actypes.h - Common data types for the entire ACPI subsystem
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2017, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #ifndef __ACTYPES_H__
45 #define __ACTYPES_H__
46
47 /* acpisrc:struct_defs -- for acpisrc conversion */
48
49 /*
50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent
51 * header and must be either 32 or 64. 16-bit ACPICA is no longer
52 * supported, as of 12/2006.
53 */
54 #ifndef ACPI_MACHINE_WIDTH
55 #error ACPI_MACHINE_WIDTH not defined
56 #endif
57
58 /*
59 * Data type ranges
60 * Note: These macros are designed to be compiler independent as well as
61 * working around problems that some 32-bit compilers have with 64-bit
62 * constants.
63 */
64 #define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */
65 #define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */
66 #define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */
67 #define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */
68 #define ACPI_ASCII_MAX 0x7F
69
70 /*
71 * Architecture-specific ACPICA Subsystem Data Types
72 *
73 * The goal of these types is to provide source code portability across
74 * 16-bit, 32-bit, and 64-bit targets.
75 *
76 * 1) The following types are of fixed size for all targets (16/32/64):
77 *
78 * u8 Logical boolean
79 *
80 * u8 8-bit (1 byte) unsigned value
81 * u16 16-bit (2 byte) unsigned value
82 * u32 32-bit (4 byte) unsigned value
83 * u64 64-bit (8 byte) unsigned value
84 *
85 * s16 16-bit (2 byte) signed value
86 * s32 32-bit (4 byte) signed value
87 * s64 64-bit (8 byte) signed value
88 *
89 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
90 * compiler-dependent header(s) and were introduced because there is no
91 * common 64-bit integer type across the various compilation models, as
92 * shown in the table below.
93 *
94 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
95 * char 8 8 8 8 8 8
96 * short 16 16 16 16 16 16
97 * _int32 32
98 * int 32 64 32 32 16 16
99 * long 64 64 32 32 32 32
100 * long long 64 64
101 * pointer 64 64 64 32 32 32
102 *
103 * Note: ILP64 and LP32 are currently not supported.
104 *
105 *
106 * 2) These types represent the native word size of the target mode of the
107 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
108 * usually used for memory allocation, efficient loop counters, and array
109 * indexes. The types are similar to the size_t type in the C library and
110 * are required because there is no C type that consistently represents the
111 * native data width. acpi_size is needed because there is no guarantee
112 * that a kernel-level C library is present.
113 *
114 * acpi_size 16/32/64-bit unsigned value
115 * acpi_native_int 16/32/64-bit signed value
116 */
117
118 /*******************************************************************************
119 *
120 * Common types for all compilers, all targets
121 *
122 ******************************************************************************/
123
124 #ifndef ACPI_USE_SYSTEM_INTTYPES
125
126 typedef unsigned char u8;
127 typedef unsigned short u16;
128 typedef short s16;
129 typedef COMPILER_DEPENDENT_UINT64 u64;
130 typedef COMPILER_DEPENDENT_INT64 s64;
131
132 #endif /* ACPI_USE_SYSTEM_INTTYPES */
133
134 /*
135 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
136 * across operating systems or even the various UNIX systems. Since ACPICA
137 * only needs the thread ID as a unique thread identifier, we use a u64
138 * as the only common data type - it will accommodate any type of pointer or
139 * any type of integer. It is up to the host-dependent OSL to cast the
140 * native thread ID type to a u64 (in acpi_os_get_thread_id).
141 */
142 #define acpi_thread_id u64
143
144 /*******************************************************************************
145 *
146 * Types specific to 64-bit targets
147 *
148 ******************************************************************************/
149
150 #if ACPI_MACHINE_WIDTH == 64
151
152 #ifndef ACPI_USE_SYSTEM_INTTYPES
153
154 typedef unsigned int u32;
155 typedef int s32;
156
157 #endif /* ACPI_USE_SYSTEM_INTTYPES */
158
159 typedef s64 acpi_native_int;
160
161 typedef u64 acpi_size;
162 typedef u64 acpi_io_address;
163 typedef u64 acpi_physical_address;
164
165 #define ACPI_MAX_PTR ACPI_UINT64_MAX
166 #define ACPI_SIZE_MAX ACPI_UINT64_MAX
167
168 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
169 #define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */
170
171 /*
172 * In the case of the Itanium Processor Family (IPF), the hardware does not
173 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED
174 * flag to indicate that special precautions must be taken to avoid alignment
175 * faults. (IA64 or ia64 is currently used by existing compilers to indicate
176 * IPF.)
177 *
178 * Note: EM64T and other X86-64 processors support misaligned transfers,
179 * so there is no need to define this flag.
180 */
181 #if defined (__IA64__) || defined (__ia64__)
182 #define ACPI_MISALIGNMENT_NOT_SUPPORTED
183 #endif
184
185 /*******************************************************************************
186 *
187 * Types specific to 32-bit targets
188 *
189 ******************************************************************************/
190
191 #elif ACPI_MACHINE_WIDTH == 32
192
193 #ifndef ACPI_USE_SYSTEM_INTTYPES
194
195 typedef unsigned int u32;
196 typedef int s32;
197
198 #endif /* ACPI_USE_SYSTEM_INTTYPES */
199
200 typedef s32 acpi_native_int;
201
202 typedef u32 acpi_size;
203
204 #ifdef ACPI_32BIT_PHYSICAL_ADDRESS
205
206 /*
207 * OSPMs can define this to shrink the size of the structures for 32-bit
208 * none PAE environment. ASL compiler may always define this to generate
209 * 32-bit OSPM compliant tables.
210 */
211 typedef u32 acpi_io_address;
212 typedef u32 acpi_physical_address;
213
214 #else /* ACPI_32BIT_PHYSICAL_ADDRESS */
215
216 /*
217 * It is reported that, after some calculations, the physical addresses can
218 * wrap over the 32-bit boundary on 32-bit PAE environment.
219 * https://bugzilla.kernel.org/show_bug.cgi?id=87971
220 */
221 typedef u64 acpi_io_address;
222 typedef u64 acpi_physical_address;
223
224 #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */
225
226 #define ACPI_MAX_PTR ACPI_UINT32_MAX
227 #define ACPI_SIZE_MAX ACPI_UINT32_MAX
228
229 #else
230
231 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */
232
233 #error unknown ACPI_MACHINE_WIDTH
234 #endif
235
236 /*******************************************************************************
237 *
238 * OS-dependent types
239 *
240 * If the defaults below are not appropriate for the host system, they can
241 * be defined in the OS-specific header, and this will take precedence.
242 *
243 ******************************************************************************/
244
245 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
246
247 #ifndef acpi_cpu_flags
248 #define acpi_cpu_flags acpi_size
249 #endif
250
251 /* Object returned from acpi_os_create_cache */
252
253 #ifndef acpi_cache_t
254 #ifdef ACPI_USE_LOCAL_CACHE
255 #define acpi_cache_t struct acpi_memory_list
256 #else
257 #define acpi_cache_t void *
258 #endif
259 #endif
260
261 /*
262 * Synchronization objects - Mutexes, Semaphores, and spin_locks
263 */
264 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
265 /*
266 * These macros are used if the host OS does not support a mutex object.
267 * Map the OSL Mutex interfaces to binary semaphores.
268 */
269 #define acpi_mutex acpi_semaphore
270 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
271 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle)
272 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
273 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1)
274 #endif
275
276 /* Configurable types for synchronization objects */
277
278 #ifndef acpi_spinlock
279 #define acpi_spinlock void *
280 #endif
281
282 #ifndef acpi_semaphore
283 #define acpi_semaphore void *
284 #endif
285
286 #ifndef acpi_mutex
287 #define acpi_mutex void *
288 #endif
289
290 /*******************************************************************************
291 *
292 * Compiler-dependent types
293 *
294 * If the defaults below are not appropriate for the host compiler, they can
295 * be defined in the compiler-specific header, and this will take precedence.
296 *
297 ******************************************************************************/
298
299 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
300
301 #ifndef acpi_uintptr_t
302 #define acpi_uintptr_t void *
303 #endif
304
305 /*
306 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
307 * some compilers can catch printf format string problems
308 */
309 #ifndef ACPI_PRINTF_LIKE
310 #define ACPI_PRINTF_LIKE(c)
311 #endif
312
313 /*
314 * Some compilers complain about unused variables. Sometimes we don't want
315 * to use all the variables (for example, _acpi_module_name). This allows us
316 * to tell the compiler in a per-variable manner that a variable
317 * is unused
318 */
319 #ifndef ACPI_UNUSED_VAR
320 #define ACPI_UNUSED_VAR
321 #endif
322
323 /*
324 * All ACPICA external functions that are available to the rest of the
325 * kernel are tagged with these macros which can be defined as appropriate
326 * for the host.
327 *
328 * Notes:
329 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
330 * interfaces that may need special processing.
331 * ACPI_EXPORT_SYMBOL is used for all other public external functions.
332 */
333 #ifndef ACPI_EXPORT_SYMBOL_INIT
334 #define ACPI_EXPORT_SYMBOL_INIT(symbol)
335 #endif
336
337 #ifndef ACPI_EXPORT_SYMBOL
338 #define ACPI_EXPORT_SYMBOL(symbol)
339 #endif
340
341 /*
342 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
343 * utilities only.
344 */
345 #ifndef ACPI_DEBUG_INITIALIZE
346 #define ACPI_DEBUG_INITIALIZE()
347 #endif
348
349 /*******************************************************************************
350 *
351 * Configuration
352 *
353 ******************************************************************************/
354
355 #ifdef ACPI_NO_MEM_ALLOCATIONS
356
357 #define ACPI_ALLOCATE(a) NULL
358 #define ACPI_ALLOCATE_ZEROED(a) NULL
359 #define ACPI_FREE(a)
360 #define ACPI_MEM_TRACKING(a)
361
362 #else /* ACPI_NO_MEM_ALLOCATIONS */
363
364 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
365 /*
366 * Memory allocation tracking (used by acpi_exec to detect memory leaks)
367 */
368 #define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__
369 #define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
370 #define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
371 #define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
372 #define ACPI_MEM_TRACKING(a) a
373
374 #else
375 /*
376 * Normal memory allocation directly via the OS services layer
377 */
378 #define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a))
379 #define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a))
380 #define ACPI_FREE(a) acpi_os_free (a)
381 #define ACPI_MEM_TRACKING(a)
382
383 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */
384
385 #endif /* ACPI_NO_MEM_ALLOCATIONS */
386
387 /******************************************************************************
388 *
389 * ACPI Specification constants (Do not change unless the specification
390 * changes)
391 *
392 *****************************************************************************/
393
394 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
395
396 #define ACPI_MAX_GPE_BLOCKS 2
397
398 /* Default ACPI register widths */
399
400 #define ACPI_GPE_REGISTER_WIDTH 8
401 #define ACPI_PM1_REGISTER_WIDTH 16
402 #define ACPI_PM2_REGISTER_WIDTH 8
403 #define ACPI_PM_TIMER_WIDTH 32
404 #define ACPI_RESET_REGISTER_WIDTH 8
405
406 /* Names within the namespace are 4 bytes long */
407
408 #define ACPI_NAME_SIZE 4
409 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
410 #define ACPI_PATH_SEPARATOR '.'
411
412 /* Sizes for ACPI table headers */
413
414 #define ACPI_OEM_ID_SIZE 6
415 #define ACPI_OEM_TABLE_ID_SIZE 8
416
417 /* ACPI/PNP hardware IDs */
418
419 #define PCI_ROOT_HID_STRING "PNP0A03"
420 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
421
422 /* PM Timer ticks per second (HZ) */
423
424 #define ACPI_PM_TIMER_FREQUENCY 3579545
425
426 /*******************************************************************************
427 *
428 * Independent types
429 *
430 ******************************************************************************/
431
432 /* Logical defines and NULL */
433
434 #ifdef FALSE
435 #undef FALSE
436 #endif
437 #define FALSE (1 == 0)
438
439 #ifdef TRUE
440 #undef TRUE
441 #endif
442 #define TRUE (1 == 1)
443
444 #ifndef NULL
445 #define NULL (void *) 0
446 #endif
447
448 /*
449 * Miscellaneous types
450 */
451 typedef u32 acpi_status; /* All ACPI Exceptions */
452 typedef u32 acpi_name; /* 4-byte ACPI name */
453 typedef char *acpi_string; /* Null terminated ASCII string */
454 typedef void *acpi_handle; /* Actually a ptr to a NS Node */
455
456 /* Time constants for timer calculations */
457
458 #define ACPI_MSEC_PER_SEC 1000L
459
460 #define ACPI_USEC_PER_MSEC 1000L
461 #define ACPI_USEC_PER_SEC 1000000L
462
463 #define ACPI_100NSEC_PER_USEC 10L
464 #define ACPI_100NSEC_PER_MSEC 10000L
465 #define ACPI_100NSEC_PER_SEC 10000000L
466
467 #define ACPI_NSEC_PER_USEC 1000L
468 #define ACPI_NSEC_PER_MSEC 1000000L
469 #define ACPI_NSEC_PER_SEC 1000000000L
470
471 /* Owner IDs are used to track namespace nodes for selective deletion */
472
473 typedef u8 acpi_owner_id;
474 #define ACPI_OWNER_ID_MAX 0xFF
475
476 #define ACPI_INTEGER_BIT_SIZE 64
477 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
478 #define ACPI_MAX64_DECIMAL_DIGITS 20
479 #define ACPI_MAX32_DECIMAL_DIGITS 10
480 #define ACPI_MAX16_DECIMAL_DIGITS 5
481 #define ACPI_MAX8_DECIMAL_DIGITS 3
482
483 /*
484 * Constants with special meanings
485 */
486 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
487 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
488 #define ACPI_DO_NOT_WAIT 0
489
490 /*
491 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are
492 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits.
493 * Note that this pertains to the ACPI integer type only, not to other
494 * integers used in the implementation of the ACPICA subsystem.
495 *
496 * 01/2010: This type is obsolete and has been removed from the entire ACPICA
497 * code base. It remains here for compatibility with device drivers that use
498 * the type. However, it will be removed in the future.
499 */
500 typedef u64 acpi_integer;
501 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX
502
503 /*******************************************************************************
504 *
505 * Commonly used macros
506 *
507 ******************************************************************************/
508
509 /* Data manipulation */
510
511 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer))
512 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8))
513 #define ACPI_LOWORD(integer) ((u16) (u32)(integer))
514 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16))
515 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64))
516 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32))
517
518 #define ACPI_SET_BIT(target,bit) ((target) |= (bit))
519 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
520 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
521 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
522
523 /* Size calculation */
524
525 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
526
527 /* Pointer manipulation */
528
529 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
530 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
531 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
532 #define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b)))
533 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
534
535 /* Pointer/Integer type conversions */
536
537 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
538 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL)
539 #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL)
540 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
541 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
542
543 /* Optimizations for 4-character (32-bit) acpi_name manipulation */
544
545 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
546 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
547 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
548 #else
549 #define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
550 #define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
551 #endif
552
553 /* Support for the special RSDP signature (8 characters) */
554
555 #define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
556 #define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
557
558 /*
559 * Algorithm to obtain access bit width.
560 * Can be used with access_width of struct acpi_generic_address and access_size of
561 * struct acpi_resource_generic_register.
562 */
563 #define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + 2))
564
565 /*******************************************************************************
566 *
567 * Miscellaneous constants
568 *
569 ******************************************************************************/
570
571 /*
572 * Initialization sequence
573 */
574 #define ACPI_FULL_INITIALIZATION 0x00
575 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01
576 #define ACPI_NO_HARDWARE_INIT 0x02
577 #define ACPI_NO_EVENT_INIT 0x04
578 #define ACPI_NO_HANDLER_INIT 0x08
579 #define ACPI_NO_ACPI_ENABLE 0x10
580 #define ACPI_NO_DEVICE_INIT 0x20
581 #define ACPI_NO_OBJECT_INIT 0x40
582 #define ACPI_NO_FACS_INIT 0x80
583
584 /*
585 * Initialization state
586 */
587 #define ACPI_SUBSYSTEM_INITIALIZE 0x01
588 #define ACPI_INITIALIZED_OK 0x02
589
590 /*
591 * Power state values
592 */
593 #define ACPI_STATE_UNKNOWN (u8) 0xFF
594
595 #define ACPI_STATE_S0 (u8) 0
596 #define ACPI_STATE_S1 (u8) 1
597 #define ACPI_STATE_S2 (u8) 2
598 #define ACPI_STATE_S3 (u8) 3
599 #define ACPI_STATE_S4 (u8) 4
600 #define ACPI_STATE_S5 (u8) 5
601 #define ACPI_S_STATES_MAX ACPI_STATE_S5
602 #define ACPI_S_STATE_COUNT 6
603
604 #define ACPI_STATE_D0 (u8) 0
605 #define ACPI_STATE_D1 (u8) 1
606 #define ACPI_STATE_D2 (u8) 2
607 #define ACPI_STATE_D3_HOT (u8) 3
608 #define ACPI_STATE_D3 (u8) 4
609 #define ACPI_STATE_D3_COLD ACPI_STATE_D3
610 #define ACPI_D_STATES_MAX ACPI_STATE_D3
611 #define ACPI_D_STATE_COUNT 5
612
613 #define ACPI_STATE_C0 (u8) 0
614 #define ACPI_STATE_C1 (u8) 1
615 #define ACPI_STATE_C2 (u8) 2
616 #define ACPI_STATE_C3 (u8) 3
617 #define ACPI_C_STATES_MAX ACPI_STATE_C3
618 #define ACPI_C_STATE_COUNT 4
619
620 /*
621 * Sleep type invalid value
622 */
623 #define ACPI_SLEEP_TYPE_MAX 0x7
624 #define ACPI_SLEEP_TYPE_INVALID 0xFF
625
626 /*
627 * Standard notify values
628 */
629 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
630 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01
631 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02
632 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03
633 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04
634 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05
635 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06
636 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07
637 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08
638 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
639 #define ACPI_NOTIFY_RESERVED (u8) 0x0A
640 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
641 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
642 #define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D
643 #define ACPI_NOTIFY_MEMORY_UPDATE (u8) 0x0E
644
645 #define ACPI_GENERIC_NOTIFY_MAX 0x0E
646 #define ACPI_SPECIFIC_NOTIFY_MAX 0x84
647
648 /*
649 * Types associated with ACPI names and objects. The first group of
650 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
651 * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
652 * only add to the first group if the spec changes.
653 *
654 * NOTE: Types must be kept in sync with the global acpi_ns_properties
655 * and acpi_ns_type_names arrays.
656 */
657 typedef u32 acpi_object_type;
658
659 #define ACPI_TYPE_ANY 0x00
660 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
661 #define ACPI_TYPE_STRING 0x02
662 #define ACPI_TYPE_BUFFER 0x03
663 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
664 #define ACPI_TYPE_FIELD_UNIT 0x05
665 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
666 #define ACPI_TYPE_EVENT 0x07
667 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
668 #define ACPI_TYPE_MUTEX 0x09
669 #define ACPI_TYPE_REGION 0x0A
670 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
671 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
672 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
673 #define ACPI_TYPE_BUFFER_FIELD 0x0E
674 #define ACPI_TYPE_DDB_HANDLE 0x0F
675 #define ACPI_TYPE_DEBUG_OBJECT 0x10
676
677 #define ACPI_TYPE_EXTERNAL_MAX 0x10
678 #define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1)
679
680 /*
681 * These are object types that do not map directly to the ACPI
682 * object_type() operator. They are used for various internal purposes
683 * only. If new predefined ACPI_TYPEs are added (via the ACPI
684 * specification), these internal types must move upwards. (There
685 * is code that depends on these values being contiguous with the
686 * external types above.)
687 */
688 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
689 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
690 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
691 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
692 #define ACPI_TYPE_LOCAL_ALIAS 0x15
693 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
694 #define ACPI_TYPE_LOCAL_NOTIFY 0x17
695 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
696 #define ACPI_TYPE_LOCAL_RESOURCE 0x19
697 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
698 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
699
700 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
701 #define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1)
702
703 /*
704 * These are special object types that never appear in
705 * a Namespace node, only in an object of union acpi_operand_object
706 */
707 #define ACPI_TYPE_LOCAL_EXTRA 0x1C
708 #define ACPI_TYPE_LOCAL_DATA 0x1D
709
710 #define ACPI_TYPE_LOCAL_MAX 0x1D
711
712 /* All types above here are invalid */
713
714 #define ACPI_TYPE_INVALID 0x1E
715 #define ACPI_TYPE_NOT_FOUND 0xFF
716
717 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1)
718
719 /*
720 * All I/O
721 */
722 #define ACPI_READ 0
723 #define ACPI_WRITE 1
724 #define ACPI_IO_MASK 1
725
726 /*
727 * Event Types: Fixed & General Purpose
728 */
729 typedef u32 acpi_event_type;
730
731 /*
732 * Fixed events
733 */
734 #define ACPI_EVENT_PMTIMER 0
735 #define ACPI_EVENT_GLOBAL 1
736 #define ACPI_EVENT_POWER_BUTTON 2
737 #define ACPI_EVENT_SLEEP_BUTTON 3
738 #define ACPI_EVENT_RTC 4
739 #define ACPI_EVENT_MAX 4
740 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
741
742 /*
743 * Event status - Per event
744 * -------------
745 * The encoding of acpi_event_status is illustrated below.
746 * Note that a set bit (1) indicates the property is TRUE
747 * (e.g. if bit 0 is set then the event is enabled).
748 * +-------------+-+-+-+-+-+-+
749 * | Bits 31:6 |5|4|3|2|1|0|
750 * +-------------+-+-+-+-+-+-+
751 * | | | | | | |
752 * | | | | | | +- Enabled?
753 * | | | | | +--- Enabled for wake?
754 * | | | | +----- Status bit set?
755 * | | | +------- Enable bit set?
756 * | | +--------- Has a handler?
757 * | +----------- Masked?
758 * +----------------- <Reserved>
759 */
760 typedef u32 acpi_event_status;
761
762 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
763 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
764 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
765 #define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04
766 #define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08
767 #define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10
768 #define ACPI_EVENT_FLAG_MASKED (acpi_event_status) 0x20
769 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET
770
771 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
772
773 #define ACPI_GPE_ENABLE 0
774 #define ACPI_GPE_DISABLE 1
775 #define ACPI_GPE_CONDITIONAL_ENABLE 2
776
777 /*
778 * GPE info flags - Per GPE
779 * +---+-+-+-+---+
780 * |7:6|5|4|3|2:0|
781 * +---+-+-+-+---+
782 * | | | | |
783 * | | | | +-- Type of dispatch:to method, handler, notify, or none
784 * | | | +----- Interrupt type: edge or level triggered
785 * | | +------- Is a Wake GPE
786 * | +--------- Has been enabled automatically at init time
787 * +------------ <Reserved>
788 */
789 #define ACPI_GPE_DISPATCH_NONE (u8) 0x00
790 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
791 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
792 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
793 #define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04
794 #define ACPI_GPE_DISPATCH_MASK (u8) 0x07
795 #define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK))
796
797 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08
798 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
799 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08
800
801 #define ACPI_GPE_CAN_WAKE (u8) 0x10
802 #define ACPI_GPE_AUTO_ENABLED (u8) 0x20
803
804 /*
805 * Flags for GPE and Lock interfaces
806 */
807 #define ACPI_NOT_ISR 0x1
808 #define ACPI_ISR 0x0
809
810 /* Notify types */
811
812 #define ACPI_SYSTEM_NOTIFY 0x1
813 #define ACPI_DEVICE_NOTIFY 0x2
814 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
815 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
816 #define ACPI_NUM_NOTIFY_TYPES 2
817
818 #define ACPI_MAX_SYS_NOTIFY 0x7F
819 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
820
821 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
822 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
823
824 /* Address Space (Operation Region) Types */
825
826 typedef u8 acpi_adr_space_type;
827
828 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
829 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
830 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
831 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
832 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
833 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
834 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
835 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
836 #define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
837 #define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
838 #define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
839
840 #define ACPI_NUM_PREDEFINED_REGIONS 11
841
842 /*
843 * Special Address Spaces
844 *
845 * Note: A Data Table region is a special type of operation region
846 * that has its own AML opcode. However, internally, the AML
847 * interpreter simply creates an operation region with an an address
848 * space type of ACPI_ADR_SPACE_DATA_TABLE.
849 */
850 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */
851 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F
852
853 /* Values for _REG connection code */
854
855 #define ACPI_REG_DISCONNECT 0
856 #define ACPI_REG_CONNECT 1
857
858 /*
859 * bit_register IDs
860 *
861 * These values are intended to be used by the hardware interfaces
862 * and are mapped to individual bitfields defined within the ACPI
863 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
864 * for this mapping.
865 */
866
867 /* PM1 Status register */
868
869 #define ACPI_BITREG_TIMER_STATUS 0x00
870 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01
871 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
872 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
873 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
874 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05
875 #define ACPI_BITREG_WAKE_STATUS 0x06
876 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
877
878 /* PM1 Enable register */
879
880 #define ACPI_BITREG_TIMER_ENABLE 0x08
881 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
882 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
883 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
884 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
885 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D
886
887 /* PM1 Control register */
888
889 #define ACPI_BITREG_SCI_ENABLE 0x0E
890 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F
891 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10
892 #define ACPI_BITREG_SLEEP_TYPE 0x11
893 #define ACPI_BITREG_SLEEP_ENABLE 0x12
894
895 /* PM2 Control register */
896
897 #define ACPI_BITREG_ARB_DISABLE 0x13
898
899 #define ACPI_BITREG_MAX 0x13
900 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
901
902 /* Status register values. A 1 clears a status bit. 0 = no effect */
903
904 #define ACPI_CLEAR_STATUS 1
905
906 /* Enable and Control register values */
907
908 #define ACPI_ENABLE_EVENT 1
909 #define ACPI_DISABLE_EVENT 0
910
911 /* Sleep function dispatch */
912
913 typedef acpi_status (*acpi_sleep_function) (u8 sleep_state);
914
915 struct acpi_sleep_functions {
916 acpi_sleep_function legacy_function;
917 acpi_sleep_function extended_function;
918 };
919
920 /*
921 * External ACPI object definition
922 */
923
924 /*
925 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package
926 * element or an unresolved named reference.
927 */
928 union acpi_object {
929 acpi_object_type type; /* See definition of acpi_ns_type for values */
930 struct {
931 acpi_object_type type; /* ACPI_TYPE_INTEGER */
932 u64 value; /* The actual number */
933 } integer;
934
935 struct {
936 acpi_object_type type; /* ACPI_TYPE_STRING */
937 u32 length; /* # of bytes in string, excluding trailing null */
938 char *pointer; /* points to the string value */
939 } string;
940
941 struct {
942 acpi_object_type type; /* ACPI_TYPE_BUFFER */
943 u32 length; /* # of bytes in buffer */
944 u8 *pointer; /* points to the buffer */
945 } buffer;
946
947 struct {
948 acpi_object_type type; /* ACPI_TYPE_PACKAGE */
949 u32 count; /* # of elements in package */
950 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
951 } package;
952
953 struct {
954 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */
955 acpi_object_type actual_type; /* Type associated with the Handle */
956 acpi_handle handle; /* object reference */
957 } reference;
958
959 struct {
960 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */
961 u32 proc_id;
962 acpi_io_address pblk_address;
963 u32 pblk_length;
964 } processor;
965
966 struct {
967 acpi_object_type type; /* ACPI_TYPE_POWER */
968 u32 system_level;
969 u32 resource_order;
970 } power_resource;
971 };
972
973 /*
974 * List of objects, used as a parameter list for control method evaluation
975 */
976 struct acpi_object_list {
977 u32 count;
978 union acpi_object *pointer;
979 };
980
981 /*
982 * Miscellaneous common Data Structures used by the interfaces
983 */
984 #define ACPI_NO_BUFFER 0
985
986 #ifdef ACPI_NO_MEM_ALLOCATIONS
987
988 #define ACPI_ALLOCATE_BUFFER (acpi_size) (0)
989 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0)
990
991 #else /* ACPI_NO_MEM_ALLOCATIONS */
992
993 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */
994 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */
995
996 #endif /* ACPI_NO_MEM_ALLOCATIONS */
997
998 struct acpi_buffer {
999 acpi_size length; /* Length in bytes of the buffer */
1000 void *pointer; /* pointer to buffer */
1001 };
1002
1003 /*
1004 * name_type for acpi_get_name
1005 */
1006 #define ACPI_FULL_PATHNAME 0
1007 #define ACPI_SINGLE_NAME 1
1008 #define ACPI_FULL_PATHNAME_NO_TRAILING 2
1009 #define ACPI_NAME_TYPE_MAX 2
1010
1011 /*
1012 * Predefined Namespace items
1013 */
1014 struct acpi_predefined_names {
1015 const char *name;
1016 u8 type;
1017 char *val;
1018 };
1019
1020 /*
1021 * Structure and flags for acpi_get_system_info
1022 */
1023 #define ACPI_SYS_MODE_UNKNOWN 0x0000
1024 #define ACPI_SYS_MODE_ACPI 0x0001
1025 #define ACPI_SYS_MODE_LEGACY 0x0002
1026 #define ACPI_SYS_MODES_MASK 0x0003
1027
1028 /*
1029 * System info returned by acpi_get_system_info()
1030 */
1031 struct acpi_system_info {
1032 u32 acpi_ca_version;
1033 u32 flags;
1034 u32 timer_resolution;
1035 u32 reserved1;
1036 u32 reserved2;
1037 u32 debug_level;
1038 u32 debug_layer;
1039 };
1040
1041 /*
1042 * System statistics returned by acpi_get_statistics()
1043 */
1044 struct acpi_statistics {
1045 u32 sci_count;
1046 u32 gpe_count;
1047 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1048 u32 method_count;
1049 };
1050
1051 /*
1052 * Types specific to the OS service interfaces
1053 */
1054 typedef u32
1055 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1056
1057 typedef void
1058 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1059
1060 /*
1061 * Various handlers and callback procedures
1062 */
1063 typedef
1064 u32 (*acpi_sci_handler) (void *context);
1065
1066 typedef
1067 void (*acpi_gbl_event_handler) (u32 event_type,
1068 acpi_handle device,
1069 u32 event_number, void *context);
1070
1071 #define ACPI_EVENT_TYPE_GPE 0
1072 #define ACPI_EVENT_TYPE_FIXED 1
1073
1074 typedef
1075 u32(*acpi_event_handler) (void *context);
1076
1077 typedef
1078 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1079
1080 typedef
1081 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1082
1083 typedef
1084 void (*acpi_object_handler) (acpi_handle object, void *data);
1085
1086 typedef
1087 acpi_status (*acpi_init_handler) (acpi_handle object, u32 function);
1088
1089 #define ACPI_INIT_DEVICE_INI 1
1090
1091 typedef
1092 acpi_status (*acpi_exception_handler) (acpi_status aml_status,
1093 acpi_name name,
1094 u16 opcode,
1095 u32 aml_offset, void *context);
1096
1097 /* Table Event handler (Load, load_table, etc.) and types */
1098
1099 typedef
1100 acpi_status (*acpi_table_handler) (u32 event, void *table, void *context);
1101
1102 /* Table Event Types */
1103
1104 #define ACPI_TABLE_EVENT_LOAD 0x0
1105 #define ACPI_TABLE_EVENT_UNLOAD 0x1
1106 #define ACPI_TABLE_EVENT_INSTALL 0x2
1107 #define ACPI_TABLE_EVENT_UNINSTALL 0x3
1108 #define ACPI_NUM_TABLE_EVENTS 4
1109
1110 /* Address Spaces (For Operation Regions) */
1111
1112 typedef
1113 acpi_status (*acpi_adr_space_handler) (u32 function,
1114 acpi_physical_address address,
1115 u32 bit_width,
1116 u64 *value,
1117 void *handler_context,
1118 void *region_context);
1119
1120 #define ACPI_DEFAULT_HANDLER NULL
1121
1122 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1123
1124 struct acpi_connection_info {
1125 u8 *connection;
1126 u16 length;
1127 u8 access_length;
1128 };
1129
1130 typedef
1131 acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
1132 u32 function,
1133 void *handler_context,
1134 void **region_context);
1135
1136 #define ACPI_REGION_ACTIVATE 0
1137 #define ACPI_REGION_DEACTIVATE 1
1138
1139 typedef
1140 acpi_status (*acpi_walk_callback) (acpi_handle object,
1141 u32 nesting_level,
1142 void *context, void **return_value);
1143
1144 typedef
1145 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1146
1147 /* Interrupt handler return values */
1148
1149 #define ACPI_INTERRUPT_NOT_HANDLED 0x00
1150 #define ACPI_INTERRUPT_HANDLED 0x01
1151
1152 /* GPE handler return values */
1153
1154 #define ACPI_REENABLE_GPE 0x80
1155
1156 /* Length of 32-bit EISAID values when converted back to a string */
1157
1158 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
1159
1160 /* Length of UUID (string) values */
1161
1162 #define ACPI_UUID_LENGTH 16
1163
1164 /* Length of 3-byte PCI class code values when converted back to a string */
1165
1166 #define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */
1167
1168 /* Structures used for device/processor HID, UID, CID */
1169
1170 struct acpi_pnp_device_id {
1171 u32 length; /* Length of string + null */
1172 char *string;
1173 };
1174
1175 struct acpi_pnp_device_id_list {
1176 u32 count; /* Number of IDs in Ids array */
1177 u32 list_size; /* Size of list, including ID strings */
1178 struct acpi_pnp_device_id ids[1]; /* ID array */
1179 };
1180
1181 /*
1182 * Structure returned from acpi_get_object_info.
1183 * Optimized for both 32-bit and 64-bit builds.
1184 */
1185 struct acpi_device_info {
1186 u32 info_size; /* Size of info, including ID strings */
1187 u32 name; /* ACPI object Name */
1188 acpi_object_type type; /* ACPI object Type */
1189 u8 param_count; /* If a method, required parameter count */
1190 u16 valid; /* Indicates which optional fields are valid */
1191 u8 flags; /* Miscellaneous info */
1192 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
1193 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
1194 u32 current_status; /* _STA value */
1195 u64 address; /* _ADR value */
1196 struct acpi_pnp_device_id hardware_id; /* _HID value */
1197 struct acpi_pnp_device_id unique_id; /* _UID value */
1198 struct acpi_pnp_device_id class_code; /* _CLS value */
1199 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
1200 };
1201
1202 /* Values for Flags field above (acpi_get_object_info) */
1203
1204 #define ACPI_PCI_ROOT_BRIDGE 0x01
1205
1206 /* Flags for Valid field above (acpi_get_object_info) */
1207
1208 #define ACPI_VALID_STA 0x0001
1209 #define ACPI_VALID_ADR 0x0002
1210 #define ACPI_VALID_HID 0x0004
1211 #define ACPI_VALID_UID 0x0008
1212 #define ACPI_VALID_CID 0x0020
1213 #define ACPI_VALID_CLS 0x0040
1214 #define ACPI_VALID_SXDS 0x0100
1215 #define ACPI_VALID_SXWS 0x0200
1216
1217 /* Flags for _STA method */
1218
1219 #define ACPI_STA_DEVICE_PRESENT 0x01
1220 #define ACPI_STA_DEVICE_ENABLED 0x02
1221 #define ACPI_STA_DEVICE_UI 0x04
1222 #define ACPI_STA_DEVICE_FUNCTIONING 0x08
1223 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
1224 #define ACPI_STA_BATTERY_PRESENT 0x10
1225
1226 /* Context structs for address space handlers */
1227
1228 struct acpi_pci_id {
1229 u16 segment;
1230 u16 bus;
1231 u16 device;
1232 u16 function;
1233 };
1234
1235 struct acpi_mem_space_context {
1236 u32 length;
1237 acpi_physical_address address;
1238 acpi_physical_address mapped_physical_address;
1239 u8 *mapped_logical_address;
1240 acpi_size mapped_length;
1241 };
1242
1243 /*
1244 * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1245 */
1246 struct acpi_memory_list {
1247 const char *list_name;
1248 void *list_head;
1249 u16 object_size;
1250 u16 max_depth;
1251 u16 current_depth;
1252
1253 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
1254
1255 /* Statistics for debug memory tracking only */
1256
1257 u32 total_allocated;
1258 u32 total_freed;
1259 u32 max_occupied;
1260 u32 total_size;
1261 u32 current_total_size;
1262 u32 requests;
1263 u32 hits;
1264 #endif
1265 };
1266
1267 /* Definitions of trace event types */
1268
1269 typedef enum {
1270 ACPI_TRACE_AML_METHOD,
1271 ACPI_TRACE_AML_OPCODE,
1272 ACPI_TRACE_AML_REGION
1273 } acpi_trace_event_type;
1274
1275 /* Definitions of _OSI support */
1276
1277 #define ACPI_VENDOR_STRINGS 0x01
1278 #define ACPI_FEATURE_STRINGS 0x02
1279 #define ACPI_ENABLE_INTERFACES 0x00
1280 #define ACPI_DISABLE_INTERFACES 0x04
1281
1282 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1283 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1284 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1285 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1286 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1287 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1288
1289 #define ACPI_OSI_WIN_2000 0x01
1290 #define ACPI_OSI_WIN_XP 0x02
1291 #define ACPI_OSI_WIN_XP_SP1 0x03
1292 #define ACPI_OSI_WINSRV_2003 0x04
1293 #define ACPI_OSI_WIN_XP_SP2 0x05
1294 #define ACPI_OSI_WINSRV_2003_SP1 0x06
1295 #define ACPI_OSI_WIN_VISTA 0x07
1296 #define ACPI_OSI_WINSRV_2008 0x08
1297 #define ACPI_OSI_WIN_VISTA_SP1 0x09
1298 #define ACPI_OSI_WIN_VISTA_SP2 0x0A
1299 #define ACPI_OSI_WIN_7 0x0B
1300 #define ACPI_OSI_WIN_8 0x0C
1301 #define ACPI_OSI_WIN_10 0x0D
1302
1303 /* Definitions of getopt */
1304
1305 #define ACPI_OPT_END -1
1306
1307 #endif /* __ACTYPES_H__ */