]>
git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/asm-powerpc/heathrow.h
1 #ifndef _ASM_POWERPC_HEATHROW_H
2 #define _ASM_POWERPC_HEATHROW_H
5 * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
7 * Grabbed from Open Firmware definitions on a PowerBook G3 Series
9 * Copyright (C) 1997 Paul Mackerras.
12 /* Front light color on Yikes/B&W G3. 32 bits */
13 #define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */
15 /* Brightness/contrast (gossamer iMac ?). 8 bits */
16 #define HEATHROW_BRIGHTNESS_CNTL 0x32
17 #define HEATHROW_CONTRAST_CNTL 0x33
19 /* offset from ohare base for feature control register */
20 #define HEATHROW_MBCR 0x34 /* Media bay control */
21 #define HEATHROW_FCR 0x38 /* Feature control */
22 #define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */
25 * Bits in feature control register.
26 * Bits postfixed with a _N are in inverse logic
28 #define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */
29 #define HRW_BAY_POWER_N 0x00000002
30 #define HRW_BAY_PCI_ENABLE 0x00000004
31 #define HRW_BAY_IDE_ENABLE 0x00000008
32 #define HRW_BAY_FLOPPY_ENABLE 0x00000010
33 #define HRW_IDE0_ENABLE 0x00000020
34 #define HRW_IDE0_RESET_N 0x00000040
35 #define HRW_BAY_DEV_MASK 0x0000001c
36 #define HRW_BAY_RESET_N 0x00000080
37 #define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */
38 #define HRW_SCC_ENABLE 0x00000200
39 #define HRW_MESH_ENABLE 0x00000400
40 #define HRW_SWIM_ENABLE 0x00000800
41 #define HRW_SOUND_POWER_N 0x00001000
42 #define HRW_SOUND_CLK_ENABLE 0x00002000
43 #define HRW_SCCA_IO 0x00004000
44 #define HRW_SCCB_IO 0x00008000
45 #define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */
46 #define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */
47 #define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */
48 #define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */
49 #define HRW_AUD_RUN22 0x00100000 /* ??? (1) */
50 #define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */
51 #define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */
52 #define HRW_IDE1_RESET_N 0x00800000 /* Media bay */
53 #define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */
54 #define HRW_RESET_SCC 0x02000000
55 #define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */
56 #define HRW_USE_MFDC 0x08000000 /* ??? (0) */
57 #define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */
58 #define HRW_BMAC_RESET 0x80000000 /* not documented in OF */
60 /* We OR those features at boot on desktop G3s */
61 #define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
63 /* Looks like Heathrow has some sort of GPIOs as well... */
64 #define HRW_GPIO_MODEM_RESET 0x6d
66 #endif /* __KERNEL__ */
67 #endif /* _ASM_POWERPC_HEATHROW_H */