2 * Physical memory management API
4 * Copyright 2011 Red Hat, Inc. and/or its affiliates
7 * Avi Kivity <avi@redhat.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
17 #ifndef CONFIG_USER_ONLY
19 #define DIRTY_MEMORY_VGA 0
20 #define DIRTY_MEMORY_CODE 1
21 #define DIRTY_MEMORY_MIGRATION 2
22 #define DIRTY_MEMORY_NUM 3 /* num of dirty bits */
24 #include "exec/cpu-common.h"
25 #ifndef CONFIG_USER_ONLY
26 #include "exec/hwaddr.h"
28 #include "exec/memattrs.h"
29 #include "qemu/queue.h"
30 #include "qemu/int128.h"
31 #include "qemu/notify.h"
32 #include "qom/object.h"
35 #define RAM_ADDR_INVALID (~(ram_addr_t)0)
37 #define MAX_PHYS_ADDR_SPACE_BITS 62
38 #define MAX_PHYS_ADDR (((hwaddr)1 << MAX_PHYS_ADDR_SPACE_BITS) - 1)
40 #define TYPE_MEMORY_REGION "qemu:memory-region"
41 #define MEMORY_REGION(obj) \
42 OBJECT_CHECK(MemoryRegion, (obj), TYPE_MEMORY_REGION)
44 typedef struct MemoryRegionOps MemoryRegionOps
;
45 typedef struct MemoryRegionMmio MemoryRegionMmio
;
47 struct MemoryRegionMmio
{
48 CPUReadMemoryFunc
*read
[3];
49 CPUWriteMemoryFunc
*write
[3];
52 typedef struct IOMMUTLBEntry IOMMUTLBEntry
;
54 /* See address_space_translate: bit 0 is read, bit 1 is write. */
62 struct IOMMUTLBEntry
{
63 AddressSpace
*target_as
;
65 hwaddr translated_addr
;
66 hwaddr addr_mask
; /* 0xfff = 4k translation */
67 IOMMUAccessFlags perm
;
71 * Bitmap for different IOMMUNotifier capabilities. Each notifier can
72 * register with one or multiple IOMMU Notifier capability bit(s).
75 IOMMU_NOTIFIER_NONE
= 0,
76 /* Notify cache invalidations */
77 IOMMU_NOTIFIER_UNMAP
= 0x1,
78 /* Notify entry changes (newly created entries) */
79 IOMMU_NOTIFIER_MAP
= 0x2,
82 #define IOMMU_NOTIFIER_ALL (IOMMU_NOTIFIER_MAP | IOMMU_NOTIFIER_UNMAP)
84 struct IOMMUNotifier
{
85 void (*notify
)(struct IOMMUNotifier
*notifier
, IOMMUTLBEntry
*data
);
86 IOMMUNotifierFlag notifier_flags
;
87 QLIST_ENTRY(IOMMUNotifier
) node
;
89 typedef struct IOMMUNotifier IOMMUNotifier
;
91 /* New-style MMIO accessors can indicate that the transaction failed.
92 * A zero (MEMTX_OK) response means success; anything else is a failure
93 * of some kind. The memory subsystem will bitwise-OR together results
94 * if it is synthesizing an operation from multiple smaller accesses.
97 #define MEMTX_ERROR (1U << 0) /* device returned an error */
98 #define MEMTX_DECODE_ERROR (1U << 1) /* nothing at that address */
99 typedef uint32_t MemTxResult
;
102 * Memory region callbacks
104 struct MemoryRegionOps
{
105 /* Read from the memory region. @addr is relative to @mr; @size is
107 uint64_t (*read
)(void *opaque
,
110 /* Write to the memory region. @addr is relative to @mr; @size is
112 void (*write
)(void *opaque
,
117 MemTxResult (*read_with_attrs
)(void *opaque
,
122 MemTxResult (*write_with_attrs
)(void *opaque
,
128 enum device_endian endianness
;
129 /* Guest-visible constraints: */
131 /* If nonzero, specify bounds on access sizes beyond which a machine
134 unsigned min_access_size
;
135 unsigned max_access_size
;
136 /* If true, unaligned accesses are supported. Otherwise unaligned
137 * accesses throw machine checks.
141 * If present, and returns #false, the transaction is not accepted
142 * by the device (and results in machine dependent behaviour such
143 * as a machine check exception).
145 bool (*accepts
)(void *opaque
, hwaddr addr
,
146 unsigned size
, bool is_write
);
148 /* Internal implementation constraints: */
150 /* If nonzero, specifies the minimum size implemented. Smaller sizes
151 * will be rounded upwards and a partial result will be returned.
153 unsigned min_access_size
;
154 /* If nonzero, specifies the maximum size implemented. Larger sizes
155 * will be done as a series of accesses with smaller sizes.
157 unsigned max_access_size
;
158 /* If true, unaligned accesses are supported. Otherwise all accesses
159 * are converted to (possibly multiple) naturally aligned accesses.
164 /* If .read and .write are not present, old_mmio may be used for
165 * backwards compatibility with old mmio registration
167 const MemoryRegionMmio old_mmio
;
170 typedef struct MemoryRegionIOMMUOps MemoryRegionIOMMUOps
;
172 struct MemoryRegionIOMMUOps
{
173 /* Return a TLB entry that contains a given address. */
174 IOMMUTLBEntry (*translate
)(MemoryRegion
*iommu
, hwaddr addr
, bool is_write
);
175 /* Returns minimum supported page size */
176 uint64_t (*get_min_page_size
)(MemoryRegion
*iommu
);
177 /* Called when IOMMU Notifier flag changed */
178 void (*notify_flag_changed
)(MemoryRegion
*iommu
,
179 IOMMUNotifierFlag old_flags
,
180 IOMMUNotifierFlag new_flags
);
183 typedef struct CoalescedMemoryRange CoalescedMemoryRange
;
184 typedef struct MemoryRegionIoeventfd MemoryRegionIoeventfd
;
186 struct MemoryRegion
{
189 /* All fields are private - violators will be prosecuted */
191 /* The following fields should fit in a cache line */
195 bool readonly
; /* For RAM regions */
197 bool flush_coalesced_mmio
;
199 uint8_t dirty_log_mask
;
202 const MemoryRegionIOMMUOps
*iommu_ops
;
204 const MemoryRegionOps
*ops
;
206 MemoryRegion
*container
;
209 void (*destructor
)(MemoryRegion
*mr
);
214 bool warning_printed
; /* For reservations */
215 uint8_t vga_logging_count
;
219 QTAILQ_HEAD(subregions
, MemoryRegion
) subregions
;
220 QTAILQ_ENTRY(MemoryRegion
) subregions_link
;
221 QTAILQ_HEAD(coalesced_ranges
, CoalescedMemoryRange
) coalesced
;
223 unsigned ioeventfd_nb
;
224 MemoryRegionIoeventfd
*ioeventfds
;
225 QLIST_HEAD(, IOMMUNotifier
) iommu_notify
;
226 IOMMUNotifierFlag iommu_notify_flags
;
230 * MemoryListener: callbacks structure for updates to the physical memory map
232 * Allows a component to adjust to changes in the guest-visible memory map.
233 * Use with memory_listener_register() and memory_listener_unregister().
235 struct MemoryListener
{
236 void (*begin
)(MemoryListener
*listener
);
237 void (*commit
)(MemoryListener
*listener
);
238 void (*region_add
)(MemoryListener
*listener
, MemoryRegionSection
*section
);
239 void (*region_del
)(MemoryListener
*listener
, MemoryRegionSection
*section
);
240 void (*region_nop
)(MemoryListener
*listener
, MemoryRegionSection
*section
);
241 void (*log_start
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
243 void (*log_stop
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
245 void (*log_sync
)(MemoryListener
*listener
, MemoryRegionSection
*section
);
246 void (*log_global_start
)(MemoryListener
*listener
);
247 void (*log_global_stop
)(MemoryListener
*listener
);
248 void (*eventfd_add
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
249 bool match_data
, uint64_t data
, EventNotifier
*e
);
250 void (*eventfd_del
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
251 bool match_data
, uint64_t data
, EventNotifier
*e
);
252 void (*coalesced_mmio_add
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
253 hwaddr addr
, hwaddr len
);
254 void (*coalesced_mmio_del
)(MemoryListener
*listener
, MemoryRegionSection
*section
,
255 hwaddr addr
, hwaddr len
);
256 /* Lower = earlier (during add), later (during del) */
258 AddressSpace
*address_space
;
259 QTAILQ_ENTRY(MemoryListener
) link
;
260 QTAILQ_ENTRY(MemoryListener
) link_as
;
264 * AddressSpace: describes a mapping of addresses to #MemoryRegion objects
266 struct AddressSpace
{
267 /* All fields are private. */
274 /* Accessed via RCU. */
275 struct FlatView
*current_map
;
278 struct MemoryRegionIoeventfd
*ioeventfds
;
279 struct AddressSpaceDispatch
*dispatch
;
280 struct AddressSpaceDispatch
*next_dispatch
;
281 MemoryListener dispatch_listener
;
282 QTAILQ_HEAD(memory_listeners_as
, MemoryListener
) listeners
;
283 QTAILQ_ENTRY(AddressSpace
) address_spaces_link
;
287 * MemoryRegionSection: describes a fragment of a #MemoryRegion
289 * @mr: the region, or %NULL if empty
290 * @address_space: the address space the region is mapped in
291 * @offset_within_region: the beginning of the section, relative to @mr's start
292 * @size: the size of the section; will not exceed @mr's boundaries
293 * @offset_within_address_space: the address of the first byte of the section
294 * relative to the region's address space
295 * @readonly: writes to this section are ignored
297 struct MemoryRegionSection
{
299 AddressSpace
*address_space
;
300 hwaddr offset_within_region
;
302 hwaddr offset_within_address_space
;
307 * memory_region_init: Initialize a memory region
309 * The region typically acts as a container for other memory regions. Use
310 * memory_region_add_subregion() to add subregions.
312 * @mr: the #MemoryRegion to be initialized
313 * @owner: the object that tracks the region's reference count
314 * @name: used for debugging; not visible to the user or ABI
315 * @size: size of the region; any subregions beyond this size will be clipped
317 void memory_region_init(MemoryRegion
*mr
,
318 struct Object
*owner
,
323 * memory_region_ref: Add 1 to a memory region's reference count
325 * Whenever memory regions are accessed outside the BQL, they need to be
326 * preserved against hot-unplug. MemoryRegions actually do not have their
327 * own reference count; they piggyback on a QOM object, their "owner".
328 * This function adds a reference to the owner.
330 * All MemoryRegions must have an owner if they can disappear, even if the
331 * device they belong to operates exclusively under the BQL. This is because
332 * the region could be returned at any time by memory_region_find, and this
333 * is usually under guest control.
335 * @mr: the #MemoryRegion
337 void memory_region_ref(MemoryRegion
*mr
);
340 * memory_region_unref: Remove 1 to a memory region's reference count
342 * Whenever memory regions are accessed outside the BQL, they need to be
343 * preserved against hot-unplug. MemoryRegions actually do not have their
344 * own reference count; they piggyback on a QOM object, their "owner".
345 * This function removes a reference to the owner and possibly destroys it.
347 * @mr: the #MemoryRegion
349 void memory_region_unref(MemoryRegion
*mr
);
352 * memory_region_init_io: Initialize an I/O memory region.
354 * Accesses into the region will cause the callbacks in @ops to be called.
355 * if @size is nonzero, subregions will be clipped to @size.
357 * @mr: the #MemoryRegion to be initialized.
358 * @owner: the object that tracks the region's reference count
359 * @ops: a structure containing read and write callbacks to be used when
360 * I/O is performed on the region.
361 * @opaque: passed to the read and write callbacks of the @ops structure.
362 * @name: used for debugging; not visible to the user or ABI
363 * @size: size of the region.
365 void memory_region_init_io(MemoryRegion
*mr
,
366 struct Object
*owner
,
367 const MemoryRegionOps
*ops
,
373 * memory_region_init_ram: Initialize RAM memory region. Accesses into the
374 * region will modify memory directly.
376 * @mr: the #MemoryRegion to be initialized.
377 * @owner: the object that tracks the region's reference count
378 * @name: the name of the region.
379 * @size: size of the region.
380 * @errp: pointer to Error*, to store an error if it happens.
382 void memory_region_init_ram(MemoryRegion
*mr
,
383 struct Object
*owner
,
389 * memory_region_init_resizeable_ram: Initialize memory region with resizeable
390 * RAM. Accesses into the region will
391 * modify memory directly. Only an initial
392 * portion of this RAM is actually used.
393 * The used size can change across reboots.
395 * @mr: the #MemoryRegion to be initialized.
396 * @owner: the object that tracks the region's reference count
397 * @name: the name of the region.
398 * @size: used size of the region.
399 * @max_size: max size of the region.
400 * @resized: callback to notify owner about used size change.
401 * @errp: pointer to Error*, to store an error if it happens.
403 void memory_region_init_resizeable_ram(MemoryRegion
*mr
,
404 struct Object
*owner
,
408 void (*resized
)(const char*,
414 * memory_region_init_ram_from_file: Initialize RAM memory region with a
417 * @mr: the #MemoryRegion to be initialized.
418 * @owner: the object that tracks the region's reference count
419 * @name: the name of the region.
420 * @size: size of the region.
421 * @share: %true if memory must be mmaped with the MAP_SHARED flag
422 * @path: the path in which to allocate the RAM.
423 * @errp: pointer to Error*, to store an error if it happens.
425 void memory_region_init_ram_from_file(MemoryRegion
*mr
,
426 struct Object
*owner
,
435 * memory_region_init_ram_ptr: Initialize RAM memory region from a
436 * user-provided pointer. Accesses into the
437 * region will modify memory directly.
439 * @mr: the #MemoryRegion to be initialized.
440 * @owner: the object that tracks the region's reference count
441 * @name: the name of the region.
442 * @size: size of the region.
443 * @ptr: memory to be mapped; must contain at least @size bytes.
445 void memory_region_init_ram_ptr(MemoryRegion
*mr
,
446 struct Object
*owner
,
452 * memory_region_init_ram_device_ptr: Initialize RAM device memory region from
453 * a user-provided pointer.
455 * A RAM device represents a mapping to a physical device, such as to a PCI
456 * MMIO BAR of an vfio-pci assigned device. The memory region may be mapped
457 * into the VM address space and access to the region will modify memory
458 * directly. However, the memory region should not be included in a memory
459 * dump (device may not be enabled/mapped at the time of the dump), and
460 * operations incompatible with manipulating MMIO should be avoided. Replaces
463 * @mr: the #MemoryRegion to be initialized.
464 * @owner: the object that tracks the region's reference count
465 * @name: the name of the region.
466 * @size: size of the region.
467 * @ptr: memory to be mapped; must contain at least @size bytes.
469 void memory_region_init_ram_device_ptr(MemoryRegion
*mr
,
470 struct Object
*owner
,
476 * memory_region_init_alias: Initialize a memory region that aliases all or a
477 * part of another memory region.
479 * @mr: the #MemoryRegion to be initialized.
480 * @owner: the object that tracks the region's reference count
481 * @name: used for debugging; not visible to the user or ABI
482 * @orig: the region to be referenced; @mr will be equivalent to
483 * @orig between @offset and @offset + @size - 1.
484 * @offset: start of the section in @orig to be referenced.
485 * @size: size of the region.
487 void memory_region_init_alias(MemoryRegion
*mr
,
488 struct Object
*owner
,
495 * memory_region_init_rom: Initialize a ROM memory region.
497 * This has the same effect as calling memory_region_init_ram()
498 * and then marking the resulting region read-only with
499 * memory_region_set_readonly().
501 * @mr: the #MemoryRegion to be initialized.
502 * @owner: the object that tracks the region's reference count
503 * @name: the name of the region.
504 * @size: size of the region.
505 * @errp: pointer to Error*, to store an error if it happens.
507 void memory_region_init_rom(MemoryRegion
*mr
,
508 struct Object
*owner
,
514 * memory_region_init_rom_device: Initialize a ROM memory region. Writes are
515 * handled via callbacks.
517 * @mr: the #MemoryRegion to be initialized.
518 * @owner: the object that tracks the region's reference count
519 * @ops: callbacks for write access handling (must not be NULL).
520 * @name: the name of the region.
521 * @size: size of the region.
522 * @errp: pointer to Error*, to store an error if it happens.
524 void memory_region_init_rom_device(MemoryRegion
*mr
,
525 struct Object
*owner
,
526 const MemoryRegionOps
*ops
,
533 * memory_region_init_reservation: Initialize a memory region that reserves
536 * A reservation region primariy serves debugging purposes. It claims I/O
537 * space that is not supposed to be handled by QEMU itself. Any access via
538 * the memory API will cause an abort().
539 * This function is deprecated. Use memory_region_init_io() with NULL
542 * @mr: the #MemoryRegion to be initialized
543 * @owner: the object that tracks the region's reference count
544 * @name: used for debugging; not visible to the user or ABI
545 * @size: size of the region.
547 static inline void memory_region_init_reservation(MemoryRegion
*mr
,
552 memory_region_init_io(mr
, owner
, NULL
, mr
, name
, size
);
556 * memory_region_init_iommu: Initialize a memory region that translates
559 * An IOMMU region translates addresses and forwards accesses to a target
562 * @mr: the #MemoryRegion to be initialized
563 * @owner: the object that tracks the region's reference count
564 * @ops: a function that translates addresses into the @target region
565 * @name: used for debugging; not visible to the user or ABI
566 * @size: size of the region.
568 void memory_region_init_iommu(MemoryRegion
*mr
,
569 struct Object
*owner
,
570 const MemoryRegionIOMMUOps
*ops
,
575 * memory_region_owner: get a memory region's owner.
577 * @mr: the memory region being queried.
579 struct Object
*memory_region_owner(MemoryRegion
*mr
);
582 * memory_region_size: get a memory region's size.
584 * @mr: the memory region being queried.
586 uint64_t memory_region_size(MemoryRegion
*mr
);
589 * memory_region_is_ram: check whether a memory region is random access
591 * Returns %true is a memory region is random access.
593 * @mr: the memory region being queried
595 static inline bool memory_region_is_ram(MemoryRegion
*mr
)
601 * memory_region_is_ram_device: check whether a memory region is a ram device
603 * Returns %true is a memory region is a device backed ram region
605 * @mr: the memory region being queried
607 bool memory_region_is_ram_device(MemoryRegion
*mr
);
610 * memory_region_is_romd: check whether a memory region is in ROMD mode
612 * Returns %true if a memory region is a ROM device and currently set to allow
615 * @mr: the memory region being queried
617 static inline bool memory_region_is_romd(MemoryRegion
*mr
)
619 return mr
->rom_device
&& mr
->romd_mode
;
623 * memory_region_is_iommu: check whether a memory region is an iommu
625 * Returns %true is a memory region is an iommu.
627 * @mr: the memory region being queried
629 static inline bool memory_region_is_iommu(MemoryRegion
*mr
)
631 return mr
->iommu_ops
;
636 * memory_region_iommu_get_min_page_size: get minimum supported page size
639 * Returns minimum supported page size for an iommu.
641 * @mr: the memory region being queried
643 uint64_t memory_region_iommu_get_min_page_size(MemoryRegion
*mr
);
646 * memory_region_notify_iommu: notify a change in an IOMMU translation entry.
648 * The notification type will be decided by entry.perm bits:
650 * - For UNMAP (cache invalidation) notifies: set entry.perm to IOMMU_NONE.
651 * - For MAP (newly added entry) notifies: set entry.perm to the
652 * permission of the page (which is definitely !IOMMU_NONE).
654 * Note: for any IOMMU implementation, an in-place mapping change
655 * should be notified with an UNMAP followed by a MAP.
657 * @mr: the memory region that was changed
658 * @entry: the new entry in the IOMMU translation table. The entry
659 * replaces all old entries for the same virtual I/O address range.
660 * Deleted entries have .@perm == 0.
662 void memory_region_notify_iommu(MemoryRegion
*mr
,
663 IOMMUTLBEntry entry
);
666 * memory_region_register_iommu_notifier: register a notifier for changes to
667 * IOMMU translation entries.
669 * @mr: the memory region to observe
670 * @n: the IOMMUNotifier to be added; the notify callback receives a
671 * pointer to an #IOMMUTLBEntry as the opaque value; the pointer
672 * ceases to be valid on exit from the notifier.
674 void memory_region_register_iommu_notifier(MemoryRegion
*mr
,
678 * memory_region_iommu_replay: replay existing IOMMU translations to
679 * a notifier with the minimum page granularity returned by
680 * mr->iommu_ops->get_page_size().
682 * @mr: the memory region to observe
683 * @n: the notifier to which to replay iommu mappings
684 * @is_write: Whether to treat the replay as a translate "write"
687 void memory_region_iommu_replay(MemoryRegion
*mr
, IOMMUNotifier
*n
,
691 * memory_region_unregister_iommu_notifier: unregister a notifier for
692 * changes to IOMMU translation entries.
694 * @mr: the memory region which was observed and for which notity_stopped()
696 * @n: the notifier to be removed.
698 void memory_region_unregister_iommu_notifier(MemoryRegion
*mr
,
702 * memory_region_name: get a memory region's name
704 * Returns the string that was used to initialize the memory region.
706 * @mr: the memory region being queried
708 const char *memory_region_name(const MemoryRegion
*mr
);
711 * memory_region_is_logging: return whether a memory region is logging writes
713 * Returns %true if the memory region is logging writes for the given client
715 * @mr: the memory region being queried
716 * @client: the client being queried
718 bool memory_region_is_logging(MemoryRegion
*mr
, uint8_t client
);
721 * memory_region_get_dirty_log_mask: return the clients for which a
722 * memory region is logging writes.
724 * Returns a bitmap of clients, in which the DIRTY_MEMORY_* constants
725 * are the bit indices.
727 * @mr: the memory region being queried
729 uint8_t memory_region_get_dirty_log_mask(MemoryRegion
*mr
);
732 * memory_region_is_rom: check whether a memory region is ROM
734 * Returns %true is a memory region is read-only memory.
736 * @mr: the memory region being queried
738 static inline bool memory_region_is_rom(MemoryRegion
*mr
)
740 return mr
->ram
&& mr
->readonly
;
745 * memory_region_get_fd: Get a file descriptor backing a RAM memory region.
747 * Returns a file descriptor backing a file-based RAM memory region,
748 * or -1 if the region is not a file-based RAM memory region.
750 * @mr: the RAM or alias memory region being queried.
752 int memory_region_get_fd(MemoryRegion
*mr
);
755 * memory_region_set_fd: Mark a RAM memory region as backed by a
758 * This function is typically used after memory_region_init_ram_ptr().
760 * @mr: the memory region being queried.
761 * @fd: the file descriptor that backs @mr.
763 void memory_region_set_fd(MemoryRegion
*mr
, int fd
);
766 * memory_region_from_host: Convert a pointer into a RAM memory region
767 * and an offset within it.
769 * Given a host pointer inside a RAM memory region (created with
770 * memory_region_init_ram() or memory_region_init_ram_ptr()), return
771 * the MemoryRegion and the offset within it.
773 * Use with care; by the time this function returns, the returned pointer is
774 * not protected by RCU anymore. If the caller is not within an RCU critical
775 * section and does not hold the iothread lock, it must have other means of
776 * protecting the pointer, such as a reference to the region that includes
777 * the incoming ram_addr_t.
779 * @mr: the memory region being queried.
781 MemoryRegion
*memory_region_from_host(void *ptr
, ram_addr_t
*offset
);
784 * memory_region_get_ram_ptr: Get a pointer into a RAM memory region.
786 * Returns a host pointer to a RAM memory region (created with
787 * memory_region_init_ram() or memory_region_init_ram_ptr()).
789 * Use with care; by the time this function returns, the returned pointer is
790 * not protected by RCU anymore. If the caller is not within an RCU critical
791 * section and does not hold the iothread lock, it must have other means of
792 * protecting the pointer, such as a reference to the region that includes
793 * the incoming ram_addr_t.
795 * @mr: the memory region being queried.
797 void *memory_region_get_ram_ptr(MemoryRegion
*mr
);
799 /* memory_region_ram_resize: Resize a RAM region.
801 * Only legal before guest might have detected the memory size: e.g. on
802 * incoming migration, or right after reset.
804 * @mr: a memory region created with @memory_region_init_resizeable_ram.
805 * @newsize: the new size the region
806 * @errp: pointer to Error*, to store an error if it happens.
808 void memory_region_ram_resize(MemoryRegion
*mr
, ram_addr_t newsize
,
812 * memory_region_set_log: Turn dirty logging on or off for a region.
814 * Turns dirty logging on or off for a specified client (display, migration).
815 * Only meaningful for RAM regions.
817 * @mr: the memory region being updated.
818 * @log: whether dirty logging is to be enabled or disabled.
819 * @client: the user of the logging information; %DIRTY_MEMORY_VGA only.
821 void memory_region_set_log(MemoryRegion
*mr
, bool log
, unsigned client
);
824 * memory_region_get_dirty: Check whether a range of bytes is dirty
825 * for a specified client.
827 * Checks whether a range of bytes has been written to since the last
828 * call to memory_region_reset_dirty() with the same @client. Dirty logging
831 * @mr: the memory region being queried.
832 * @addr: the address (relative to the start of the region) being queried.
833 * @size: the size of the range being queried.
834 * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
837 bool memory_region_get_dirty(MemoryRegion
*mr
, hwaddr addr
,
838 hwaddr size
, unsigned client
);
841 * memory_region_set_dirty: Mark a range of bytes as dirty in a memory region.
843 * Marks a range of bytes as dirty, after it has been dirtied outside
846 * @mr: the memory region being dirtied.
847 * @addr: the address (relative to the start of the region) being dirtied.
848 * @size: size of the range being dirtied.
850 void memory_region_set_dirty(MemoryRegion
*mr
, hwaddr addr
,
854 * memory_region_test_and_clear_dirty: Check whether a range of bytes is dirty
855 * for a specified client. It clears them.
857 * Checks whether a range of bytes has been written to since the last
858 * call to memory_region_reset_dirty() with the same @client. Dirty logging
861 * @mr: the memory region being queried.
862 * @addr: the address (relative to the start of the region) being queried.
863 * @size: the size of the range being queried.
864 * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
867 bool memory_region_test_and_clear_dirty(MemoryRegion
*mr
, hwaddr addr
,
868 hwaddr size
, unsigned client
);
870 * memory_region_sync_dirty_bitmap: Synchronize a region's dirty bitmap with
871 * any external TLBs (e.g. kvm)
873 * Flushes dirty information from accelerators such as kvm and vhost-net
874 * and makes it available to users of the memory API.
876 * @mr: the region being flushed.
878 void memory_region_sync_dirty_bitmap(MemoryRegion
*mr
);
881 * memory_region_reset_dirty: Mark a range of pages as clean, for a specified
884 * Marks a range of pages as no longer dirty.
886 * @mr: the region being updated.
887 * @addr: the start of the subrange being cleaned.
888 * @size: the size of the subrange being cleaned.
889 * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
892 void memory_region_reset_dirty(MemoryRegion
*mr
, hwaddr addr
,
893 hwaddr size
, unsigned client
);
896 * memory_region_set_readonly: Turn a memory region read-only (or read-write)
898 * Allows a memory region to be marked as read-only (turning it into a ROM).
899 * only useful on RAM regions.
901 * @mr: the region being updated.
902 * @readonly: whether rhe region is to be ROM or RAM.
904 void memory_region_set_readonly(MemoryRegion
*mr
, bool readonly
);
907 * memory_region_rom_device_set_romd: enable/disable ROMD mode
909 * Allows a ROM device (initialized with memory_region_init_rom_device() to
910 * set to ROMD mode (default) or MMIO mode. When it is in ROMD mode, the
911 * device is mapped to guest memory and satisfies read access directly.
912 * When in MMIO mode, reads are forwarded to the #MemoryRegion.read function.
913 * Writes are always handled by the #MemoryRegion.write function.
915 * @mr: the memory region to be updated
916 * @romd_mode: %true to put the region into ROMD mode
918 void memory_region_rom_device_set_romd(MemoryRegion
*mr
, bool romd_mode
);
921 * memory_region_set_coalescing: Enable memory coalescing for the region.
923 * Enabled writes to a region to be queued for later processing. MMIO ->write
924 * callbacks may be delayed until a non-coalesced MMIO is issued.
925 * Only useful for IO regions. Roughly similar to write-combining hardware.
927 * @mr: the memory region to be write coalesced
929 void memory_region_set_coalescing(MemoryRegion
*mr
);
932 * memory_region_add_coalescing: Enable memory coalescing for a sub-range of
935 * Like memory_region_set_coalescing(), but works on a sub-range of a region.
936 * Multiple calls can be issued coalesced disjoint ranges.
938 * @mr: the memory region to be updated.
939 * @offset: the start of the range within the region to be coalesced.
940 * @size: the size of the subrange to be coalesced.
942 void memory_region_add_coalescing(MemoryRegion
*mr
,
947 * memory_region_clear_coalescing: Disable MMIO coalescing for the region.
949 * Disables any coalescing caused by memory_region_set_coalescing() or
950 * memory_region_add_coalescing(). Roughly equivalent to uncacheble memory
953 * @mr: the memory region to be updated.
955 void memory_region_clear_coalescing(MemoryRegion
*mr
);
958 * memory_region_set_flush_coalesced: Enforce memory coalescing flush before
961 * Ensure that pending coalesced MMIO request are flushed before the memory
962 * region is accessed. This property is automatically enabled for all regions
963 * passed to memory_region_set_coalescing() and memory_region_add_coalescing().
965 * @mr: the memory region to be updated.
967 void memory_region_set_flush_coalesced(MemoryRegion
*mr
);
970 * memory_region_clear_flush_coalesced: Disable memory coalescing flush before
973 * Clear the automatic coalesced MMIO flushing enabled via
974 * memory_region_set_flush_coalesced. Note that this service has no effect on
975 * memory regions that have MMIO coalescing enabled for themselves. For them,
976 * automatic flushing will stop once coalescing is disabled.
978 * @mr: the memory region to be updated.
980 void memory_region_clear_flush_coalesced(MemoryRegion
*mr
);
983 * memory_region_set_global_locking: Declares the access processing requires
984 * QEMU's global lock.
986 * When this is invoked, accesses to the memory region will be processed while
987 * holding the global lock of QEMU. This is the default behavior of memory
990 * @mr: the memory region to be updated.
992 void memory_region_set_global_locking(MemoryRegion
*mr
);
995 * memory_region_clear_global_locking: Declares that access processing does
996 * not depend on the QEMU global lock.
998 * By clearing this property, accesses to the memory region will be processed
999 * outside of QEMU's global lock (unless the lock is held on when issuing the
1000 * access request). In this case, the device model implementing the access
1001 * handlers is responsible for synchronization of concurrency.
1003 * @mr: the memory region to be updated.
1005 void memory_region_clear_global_locking(MemoryRegion
*mr
);
1008 * memory_region_add_eventfd: Request an eventfd to be triggered when a word
1009 * is written to a location.
1011 * Marks a word in an IO region (initialized with memory_region_init_io())
1012 * as a trigger for an eventfd event. The I/O callback will not be called.
1013 * The caller must be prepared to handle failure (that is, take the required
1014 * action if the callback _is_ called).
1016 * @mr: the memory region being updated.
1017 * @addr: the address within @mr that is to be monitored
1018 * @size: the size of the access to trigger the eventfd
1019 * @match_data: whether to match against @data, instead of just @addr
1020 * @data: the data to match against the guest write
1021 * @fd: the eventfd to be triggered when @addr, @size, and @data all match.
1023 void memory_region_add_eventfd(MemoryRegion
*mr
,
1031 * memory_region_del_eventfd: Cancel an eventfd.
1033 * Cancels an eventfd trigger requested by a previous
1034 * memory_region_add_eventfd() call.
1036 * @mr: the memory region being updated.
1037 * @addr: the address within @mr that is to be monitored
1038 * @size: the size of the access to trigger the eventfd
1039 * @match_data: whether to match against @data, instead of just @addr
1040 * @data: the data to match against the guest write
1041 * @fd: the eventfd to be triggered when @addr, @size, and @data all match.
1043 void memory_region_del_eventfd(MemoryRegion
*mr
,
1051 * memory_region_add_subregion: Add a subregion to a container.
1053 * Adds a subregion at @offset. The subregion may not overlap with other
1054 * subregions (except for those explicitly marked as overlapping). A region
1055 * may only be added once as a subregion (unless removed with
1056 * memory_region_del_subregion()); use memory_region_init_alias() if you
1057 * want a region to be a subregion in multiple locations.
1059 * @mr: the region to contain the new subregion; must be a container
1060 * initialized with memory_region_init().
1061 * @offset: the offset relative to @mr where @subregion is added.
1062 * @subregion: the subregion to be added.
1064 void memory_region_add_subregion(MemoryRegion
*mr
,
1066 MemoryRegion
*subregion
);
1068 * memory_region_add_subregion_overlap: Add a subregion to a container
1071 * Adds a subregion at @offset. The subregion may overlap with other
1072 * subregions. Conflicts are resolved by having a higher @priority hide a
1073 * lower @priority. Subregions without priority are taken as @priority 0.
1074 * A region may only be added once as a subregion (unless removed with
1075 * memory_region_del_subregion()); use memory_region_init_alias() if you
1076 * want a region to be a subregion in multiple locations.
1078 * @mr: the region to contain the new subregion; must be a container
1079 * initialized with memory_region_init().
1080 * @offset: the offset relative to @mr where @subregion is added.
1081 * @subregion: the subregion to be added.
1082 * @priority: used for resolving overlaps; highest priority wins.
1084 void memory_region_add_subregion_overlap(MemoryRegion
*mr
,
1086 MemoryRegion
*subregion
,
1090 * memory_region_get_ram_addr: Get the ram address associated with a memory
1093 ram_addr_t
memory_region_get_ram_addr(MemoryRegion
*mr
);
1095 uint64_t memory_region_get_alignment(const MemoryRegion
*mr
);
1097 * memory_region_del_subregion: Remove a subregion.
1099 * Removes a subregion from its container.
1101 * @mr: the container to be updated.
1102 * @subregion: the region being removed; must be a current subregion of @mr.
1104 void memory_region_del_subregion(MemoryRegion
*mr
,
1105 MemoryRegion
*subregion
);
1108 * memory_region_set_enabled: dynamically enable or disable a region
1110 * Enables or disables a memory region. A disabled memory region
1111 * ignores all accesses to itself and its subregions. It does not
1112 * obscure sibling subregions with lower priority - it simply behaves as
1113 * if it was removed from the hierarchy.
1115 * Regions default to being enabled.
1117 * @mr: the region to be updated
1118 * @enabled: whether to enable or disable the region
1120 void memory_region_set_enabled(MemoryRegion
*mr
, bool enabled
);
1123 * memory_region_set_address: dynamically update the address of a region
1125 * Dynamically updates the address of a region, relative to its container.
1126 * May be used on regions are currently part of a memory hierarchy.
1128 * @mr: the region to be updated
1129 * @addr: new address, relative to container region
1131 void memory_region_set_address(MemoryRegion
*mr
, hwaddr addr
);
1134 * memory_region_set_size: dynamically update the size of a region.
1136 * Dynamically updates the size of a region.
1138 * @mr: the region to be updated
1139 * @size: used size of the region.
1141 void memory_region_set_size(MemoryRegion
*mr
, uint64_t size
);
1144 * memory_region_set_alias_offset: dynamically update a memory alias's offset
1146 * Dynamically updates the offset into the target region that an alias points
1147 * to, as if the fourth argument to memory_region_init_alias() has changed.
1149 * @mr: the #MemoryRegion to be updated; should be an alias.
1150 * @offset: the new offset into the target memory region
1152 void memory_region_set_alias_offset(MemoryRegion
*mr
,
1156 * memory_region_present: checks if an address relative to a @container
1157 * translates into #MemoryRegion within @container
1159 * Answer whether a #MemoryRegion within @container covers the address
1162 * @container: a #MemoryRegion within which @addr is a relative address
1163 * @addr: the area within @container to be searched
1165 bool memory_region_present(MemoryRegion
*container
, hwaddr addr
);
1168 * memory_region_is_mapped: returns true if #MemoryRegion is mapped
1169 * into any address space.
1171 * @mr: a #MemoryRegion which should be checked if it's mapped
1173 bool memory_region_is_mapped(MemoryRegion
*mr
);
1176 * memory_region_find: translate an address/size relative to a
1177 * MemoryRegion into a #MemoryRegionSection.
1179 * Locates the first #MemoryRegion within @mr that overlaps the range
1180 * given by @addr and @size.
1182 * Returns a #MemoryRegionSection that describes a contiguous overlap.
1183 * It will have the following characteristics:
1184 * .@size = 0 iff no overlap was found
1185 * .@mr is non-%NULL iff an overlap was found
1187 * Remember that in the return value the @offset_within_region is
1188 * relative to the returned region (in the .@mr field), not to the
1191 * Similarly, the .@offset_within_address_space is relative to the
1192 * address space that contains both regions, the passed and the
1193 * returned one. However, in the special case where the @mr argument
1194 * has no container (and thus is the root of the address space), the
1195 * following will hold:
1196 * .@offset_within_address_space >= @addr
1197 * .@offset_within_address_space + .@size <= @addr + @size
1199 * @mr: a MemoryRegion within which @addr is a relative address
1200 * @addr: start of the area within @as to be searched
1201 * @size: size of the area to be searched
1203 MemoryRegionSection
memory_region_find(MemoryRegion
*mr
,
1204 hwaddr addr
, uint64_t size
);
1207 * memory_global_dirty_log_sync: synchronize the dirty log for all memory
1209 * Synchronizes the dirty page log for all address spaces.
1211 void memory_global_dirty_log_sync(void);
1214 * memory_region_transaction_begin: Start a transaction.
1216 * During a transaction, changes will be accumulated and made visible
1217 * only when the transaction ends (is committed).
1219 void memory_region_transaction_begin(void);
1222 * memory_region_transaction_commit: Commit a transaction and make changes
1223 * visible to the guest.
1225 void memory_region_transaction_commit(void);
1228 * memory_listener_register: register callbacks to be called when memory
1229 * sections are mapped or unmapped into an address
1232 * @listener: an object containing the callbacks to be called
1233 * @filter: if non-%NULL, only regions in this address space will be observed
1235 void memory_listener_register(MemoryListener
*listener
, AddressSpace
*filter
);
1238 * memory_listener_unregister: undo the effect of memory_listener_register()
1240 * @listener: an object containing the callbacks to be removed
1242 void memory_listener_unregister(MemoryListener
*listener
);
1245 * memory_global_dirty_log_start: begin dirty logging for all regions
1247 void memory_global_dirty_log_start(void);
1250 * memory_global_dirty_log_stop: end dirty logging for all regions
1252 void memory_global_dirty_log_stop(void);
1254 void mtree_info(fprintf_function mon_printf
, void *f
);
1257 * memory_region_dispatch_read: perform a read directly to the specified
1260 * @mr: #MemoryRegion to access
1261 * @addr: address within that region
1262 * @pval: pointer to uint64_t which the data is written to
1263 * @size: size of the access in bytes
1264 * @attrs: memory transaction attributes to use for the access
1266 MemTxResult
memory_region_dispatch_read(MemoryRegion
*mr
,
1272 * memory_region_dispatch_write: perform a write directly to the specified
1275 * @mr: #MemoryRegion to access
1276 * @addr: address within that region
1277 * @data: data to write
1278 * @size: size of the access in bytes
1279 * @attrs: memory transaction attributes to use for the access
1281 MemTxResult
memory_region_dispatch_write(MemoryRegion
*mr
,
1288 * address_space_init: initializes an address space
1290 * @as: an uninitialized #AddressSpace
1291 * @root: a #MemoryRegion that routes addresses for the address space
1292 * @name: an address space name. The name is only used for debugging
1295 void address_space_init(AddressSpace
*as
, MemoryRegion
*root
, const char *name
);
1298 * address_space_init_shareable: return an address space for a memory region,
1299 * creating it if it does not already exist
1301 * @root: a #MemoryRegion that routes addresses for the address space
1302 * @name: an address space name. The name is only used for debugging
1305 * This function will return a pointer to an existing AddressSpace
1306 * which was initialized with the specified MemoryRegion, or it will
1307 * create and initialize one if it does not already exist. The ASes
1308 * are reference-counted, so the memory will be freed automatically
1309 * when the AddressSpace is destroyed via address_space_destroy.
1311 AddressSpace
*address_space_init_shareable(MemoryRegion
*root
,
1315 * address_space_destroy: destroy an address space
1317 * Releases all resources associated with an address space. After an address space
1318 * is destroyed, its root memory region (given by address_space_init()) may be destroyed
1321 * @as: address space to be destroyed
1323 void address_space_destroy(AddressSpace
*as
);
1326 * address_space_rw: read from or write to an address space.
1328 * Return a MemTxResult indicating whether the operation succeeded
1329 * or failed (eg unassigned memory, device rejected the transaction,
1332 * @as: #AddressSpace to be accessed
1333 * @addr: address within that address space
1334 * @attrs: memory transaction attributes
1335 * @buf: buffer with the data transferred
1336 * @is_write: indicates the transfer direction
1338 MemTxResult
address_space_rw(AddressSpace
*as
, hwaddr addr
,
1339 MemTxAttrs attrs
, uint8_t *buf
,
1340 int len
, bool is_write
);
1343 * address_space_write: write to address space.
1345 * Return a MemTxResult indicating whether the operation succeeded
1346 * or failed (eg unassigned memory, device rejected the transaction,
1349 * @as: #AddressSpace to be accessed
1350 * @addr: address within that address space
1351 * @attrs: memory transaction attributes
1352 * @buf: buffer with the data transferred
1354 MemTxResult
address_space_write(AddressSpace
*as
, hwaddr addr
,
1356 const uint8_t *buf
, int len
);
1358 /* address_space_ld*: load from an address space
1359 * address_space_st*: store to an address space
1361 * These functions perform a load or store of the byte, word,
1362 * longword or quad to the specified address within the AddressSpace.
1363 * The _le suffixed functions treat the data as little endian;
1364 * _be indicates big endian; no suffix indicates "same endianness
1367 * The "guest CPU endianness" accessors are deprecated for use outside
1368 * target-* code; devices should be CPU-agnostic and use either the LE
1369 * or the BE accessors.
1371 * @as #AddressSpace to be accessed
1372 * @addr: address within that address space
1373 * @val: data value, for stores
1374 * @attrs: memory transaction attributes
1375 * @result: location to write the success/failure of the transaction;
1376 * if NULL, this information is discarded
1378 uint32_t address_space_ldub(AddressSpace
*as
, hwaddr addr
,
1379 MemTxAttrs attrs
, MemTxResult
*result
);
1380 uint32_t address_space_lduw_le(AddressSpace
*as
, hwaddr addr
,
1381 MemTxAttrs attrs
, MemTxResult
*result
);
1382 uint32_t address_space_lduw_be(AddressSpace
*as
, hwaddr addr
,
1383 MemTxAttrs attrs
, MemTxResult
*result
);
1384 uint32_t address_space_ldl_le(AddressSpace
*as
, hwaddr addr
,
1385 MemTxAttrs attrs
, MemTxResult
*result
);
1386 uint32_t address_space_ldl_be(AddressSpace
*as
, hwaddr addr
,
1387 MemTxAttrs attrs
, MemTxResult
*result
);
1388 uint64_t address_space_ldq_le(AddressSpace
*as
, hwaddr addr
,
1389 MemTxAttrs attrs
, MemTxResult
*result
);
1390 uint64_t address_space_ldq_be(AddressSpace
*as
, hwaddr addr
,
1391 MemTxAttrs attrs
, MemTxResult
*result
);
1392 void address_space_stb(AddressSpace
*as
, hwaddr addr
, uint32_t val
,
1393 MemTxAttrs attrs
, MemTxResult
*result
);
1394 void address_space_stw_le(AddressSpace
*as
, hwaddr addr
, uint32_t val
,
1395 MemTxAttrs attrs
, MemTxResult
*result
);
1396 void address_space_stw_be(AddressSpace
*as
, hwaddr addr
, uint32_t val
,
1397 MemTxAttrs attrs
, MemTxResult
*result
);
1398 void address_space_stl_le(AddressSpace
*as
, hwaddr addr
, uint32_t val
,
1399 MemTxAttrs attrs
, MemTxResult
*result
);
1400 void address_space_stl_be(AddressSpace
*as
, hwaddr addr
, uint32_t val
,
1401 MemTxAttrs attrs
, MemTxResult
*result
);
1402 void address_space_stq_le(AddressSpace
*as
, hwaddr addr
, uint64_t val
,
1403 MemTxAttrs attrs
, MemTxResult
*result
);
1404 void address_space_stq_be(AddressSpace
*as
, hwaddr addr
, uint64_t val
,
1405 MemTxAttrs attrs
, MemTxResult
*result
);
1407 uint32_t ldub_phys(AddressSpace
*as
, hwaddr addr
);
1408 uint32_t lduw_le_phys(AddressSpace
*as
, hwaddr addr
);
1409 uint32_t lduw_be_phys(AddressSpace
*as
, hwaddr addr
);
1410 uint32_t ldl_le_phys(AddressSpace
*as
, hwaddr addr
);
1411 uint32_t ldl_be_phys(AddressSpace
*as
, hwaddr addr
);
1412 uint64_t ldq_le_phys(AddressSpace
*as
, hwaddr addr
);
1413 uint64_t ldq_be_phys(AddressSpace
*as
, hwaddr addr
);
1414 void stb_phys(AddressSpace
*as
, hwaddr addr
, uint32_t val
);
1415 void stw_le_phys(AddressSpace
*as
, hwaddr addr
, uint32_t val
);
1416 void stw_be_phys(AddressSpace
*as
, hwaddr addr
, uint32_t val
);
1417 void stl_le_phys(AddressSpace
*as
, hwaddr addr
, uint32_t val
);
1418 void stl_be_phys(AddressSpace
*as
, hwaddr addr
, uint32_t val
);
1419 void stq_le_phys(AddressSpace
*as
, hwaddr addr
, uint64_t val
);
1420 void stq_be_phys(AddressSpace
*as
, hwaddr addr
, uint64_t val
);
1422 struct MemoryRegionCache
{
1430 /* address_space_cache_init: prepare for repeated access to a physical
1433 * @cache: #MemoryRegionCache to be filled
1434 * @as: #AddressSpace to be accessed
1435 * @addr: address within that address space
1436 * @len: length of buffer
1437 * @is_write: indicates the transfer direction
1439 * Will only work with RAM, and may map a subset of the requested range by
1440 * returning a value that is less than @len. On failure, return a negative
1443 * Because it only works with RAM, this function can be used for
1444 * read-modify-write operations. In this case, is_write should be %true.
1446 * Note that addresses passed to the address_space_*_cached functions
1447 * are relative to @addr.
1449 int64_t address_space_cache_init(MemoryRegionCache
*cache
,
1456 * address_space_cache_invalidate: complete a write to a #MemoryRegionCache
1458 * @cache: The #MemoryRegionCache to operate on.
1459 * @addr: The first physical address that was written, relative to the
1460 * address that was passed to @address_space_cache_init.
1461 * @access_len: The number of bytes that were written starting at @addr.
1463 void address_space_cache_invalidate(MemoryRegionCache
*cache
,
1468 * address_space_cache_destroy: free a #MemoryRegionCache
1470 * @cache: The #MemoryRegionCache whose memory should be released.
1472 void address_space_cache_destroy(MemoryRegionCache
*cache
);
1474 /* address_space_ld*_cached: load from a cached #MemoryRegion
1475 * address_space_st*_cached: store into a cached #MemoryRegion
1477 * These functions perform a load or store of the byte, word,
1478 * longword or quad to the specified address. The address is
1479 * a physical address in the AddressSpace, but it must lie within
1480 * a #MemoryRegion that was mapped with address_space_cache_init.
1482 * The _le suffixed functions treat the data as little endian;
1483 * _be indicates big endian; no suffix indicates "same endianness
1486 * The "guest CPU endianness" accessors are deprecated for use outside
1487 * target-* code; devices should be CPU-agnostic and use either the LE
1488 * or the BE accessors.
1490 * @cache: previously initialized #MemoryRegionCache to be accessed
1491 * @addr: address within the address space
1492 * @val: data value, for stores
1493 * @attrs: memory transaction attributes
1494 * @result: location to write the success/failure of the transaction;
1495 * if NULL, this information is discarded
1497 uint32_t address_space_ldub_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1498 MemTxAttrs attrs
, MemTxResult
*result
);
1499 uint32_t address_space_lduw_le_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1500 MemTxAttrs attrs
, MemTxResult
*result
);
1501 uint32_t address_space_lduw_be_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1502 MemTxAttrs attrs
, MemTxResult
*result
);
1503 uint32_t address_space_ldl_le_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1504 MemTxAttrs attrs
, MemTxResult
*result
);
1505 uint32_t address_space_ldl_be_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1506 MemTxAttrs attrs
, MemTxResult
*result
);
1507 uint64_t address_space_ldq_le_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1508 MemTxAttrs attrs
, MemTxResult
*result
);
1509 uint64_t address_space_ldq_be_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1510 MemTxAttrs attrs
, MemTxResult
*result
);
1511 void address_space_stb_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
,
1512 MemTxAttrs attrs
, MemTxResult
*result
);
1513 void address_space_stw_le_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
,
1514 MemTxAttrs attrs
, MemTxResult
*result
);
1515 void address_space_stw_be_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
,
1516 MemTxAttrs attrs
, MemTxResult
*result
);
1517 void address_space_stl_le_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
,
1518 MemTxAttrs attrs
, MemTxResult
*result
);
1519 void address_space_stl_be_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
,
1520 MemTxAttrs attrs
, MemTxResult
*result
);
1521 void address_space_stq_le_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint64_t val
,
1522 MemTxAttrs attrs
, MemTxResult
*result
);
1523 void address_space_stq_be_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint64_t val
,
1524 MemTxAttrs attrs
, MemTxResult
*result
);
1526 uint32_t ldub_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1527 uint32_t lduw_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1528 uint32_t lduw_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1529 uint32_t ldl_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1530 uint32_t ldl_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1531 uint64_t ldq_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1532 uint64_t ldq_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
);
1533 void stb_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
);
1534 void stw_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
);
1535 void stw_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
);
1536 void stl_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
);
1537 void stl_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint32_t val
);
1538 void stq_le_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint64_t val
);
1539 void stq_be_phys_cached(MemoryRegionCache
*cache
, hwaddr addr
, uint64_t val
);
1541 /* address_space_translate: translate an address range into an address space
1542 * into a MemoryRegion and an address range into that section. Should be
1543 * called from an RCU critical section, to avoid that the last reference
1544 * to the returned region disappears after address_space_translate returns.
1546 * @as: #AddressSpace to be accessed
1547 * @addr: address within that address space
1548 * @xlat: pointer to address within the returned memory region section's
1550 * @len: pointer to length
1551 * @is_write: indicates the transfer direction
1553 MemoryRegion
*address_space_translate(AddressSpace
*as
, hwaddr addr
,
1554 hwaddr
*xlat
, hwaddr
*len
,
1557 /* address_space_access_valid: check for validity of accessing an address
1560 * Check whether memory is assigned to the given address space range, and
1561 * access is permitted by any IOMMU regions that are active for the address
1564 * For now, addr and len should be aligned to a page size. This limitation
1565 * will be lifted in the future.
1567 * @as: #AddressSpace to be accessed
1568 * @addr: address within that address space
1569 * @len: length of the area to be checked
1570 * @is_write: indicates the transfer direction
1572 bool address_space_access_valid(AddressSpace
*as
, hwaddr addr
, int len
, bool is_write
);
1574 /* address_space_map: map a physical memory region into a host virtual address
1576 * May map a subset of the requested range, given by and returned in @plen.
1577 * May return %NULL if resources needed to perform the mapping are exhausted.
1578 * Use only for reads OR writes - not for read-modify-write operations.
1579 * Use cpu_register_map_client() to know when retrying the map operation is
1580 * likely to succeed.
1582 * @as: #AddressSpace to be accessed
1583 * @addr: address within that address space
1584 * @plen: pointer to length of buffer; updated on return
1585 * @is_write: indicates the transfer direction
1587 void *address_space_map(AddressSpace
*as
, hwaddr addr
,
1588 hwaddr
*plen
, bool is_write
);
1590 /* address_space_unmap: Unmaps a memory region previously mapped by address_space_map()
1592 * Will also mark the memory as dirty if @is_write == %true. @access_len gives
1593 * the amount of memory that was actually read or written by the caller.
1595 * @as: #AddressSpace used
1596 * @addr: address within that address space
1597 * @len: buffer length as returned by address_space_map()
1598 * @access_len: amount of data actually transferred
1599 * @is_write: indicates the transfer direction
1601 void address_space_unmap(AddressSpace
*as
, void *buffer
, hwaddr len
,
1602 int is_write
, hwaddr access_len
);
1605 /* Internal functions, part of the implementation of address_space_read. */
1606 MemTxResult
address_space_read_continue(AddressSpace
*as
, hwaddr addr
,
1607 MemTxAttrs attrs
, uint8_t *buf
,
1608 int len
, hwaddr addr1
, hwaddr l
,
1610 MemTxResult
address_space_read_full(AddressSpace
*as
, hwaddr addr
,
1611 MemTxAttrs attrs
, uint8_t *buf
, int len
);
1612 void *qemu_map_ram_ptr(RAMBlock
*ram_block
, ram_addr_t addr
);
1614 static inline bool memory_access_is_direct(MemoryRegion
*mr
, bool is_write
)
1617 return memory_region_is_ram(mr
) &&
1618 !mr
->readonly
&& !memory_region_is_ram_device(mr
);
1620 return (memory_region_is_ram(mr
) && !memory_region_is_ram_device(mr
)) ||
1621 memory_region_is_romd(mr
);
1626 * address_space_read: read from an address space.
1628 * Return a MemTxResult indicating whether the operation succeeded
1629 * or failed (eg unassigned memory, device rejected the transaction,
1632 * @as: #AddressSpace to be accessed
1633 * @addr: address within that address space
1634 * @attrs: memory transaction attributes
1635 * @buf: buffer with the data transferred
1637 static inline __attribute__((__always_inline__
))
1638 MemTxResult
address_space_read(AddressSpace
*as
, hwaddr addr
, MemTxAttrs attrs
,
1639 uint8_t *buf
, int len
)
1641 MemTxResult result
= MEMTX_OK
;
1646 if (__builtin_constant_p(len
)) {
1650 mr
= address_space_translate(as
, addr
, &addr1
, &l
, false);
1651 if (len
== l
&& memory_access_is_direct(mr
, false)) {
1652 ptr
= qemu_map_ram_ptr(mr
->ram_block
, addr1
);
1653 memcpy(buf
, ptr
, len
);
1655 result
= address_space_read_continue(as
, addr
, attrs
, buf
, len
,
1661 result
= address_space_read_full(as
, addr
, attrs
, buf
, len
);
1667 * address_space_read_cached: read from a cached RAM region
1669 * @cache: Cached region to be addressed
1670 * @addr: address relative to the base of the RAM region
1671 * @buf: buffer with the data transferred
1672 * @len: length of the data transferred
1675 address_space_read_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1678 assert(addr
< cache
->len
&& len
<= cache
->len
- addr
);
1679 memcpy(buf
, cache
->ptr
+ addr
, len
);
1683 * address_space_write_cached: write to a cached RAM region
1685 * @cache: Cached region to be addressed
1686 * @addr: address relative to the base of the RAM region
1687 * @buf: buffer with the data transferred
1688 * @len: length of the data transferred
1691 address_space_write_cached(MemoryRegionCache
*cache
, hwaddr addr
,
1694 assert(addr
< cache
->len
&& len
<= cache
->len
- addr
);
1695 memcpy(cache
->ptr
+ addr
, buf
, len
);