include/linux/alcor_pci.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de>
   4  *
   5  * Driver for Alcor Micro AU6601 and AU6621 controllers
   6  */
   7
   8 #ifndef __ALCOR_PCI_H
   9 #define __ALCOR_PCI_H
  10
  11 #define ALCOR_SD_CARD 0
  12 #define ALCOR_MS_CARD 1
  13
  14 #define DRV_NAME_ALCOR_PCI_SDMMC                "alcor_sdmmc"
  15 #define DRV_NAME_ALCOR_PCI_MS                   "alcor_ms"
  16
  17 #define PCI_ID_ALCOR_MICRO                      0x1AEA
  18 #define PCI_ID_AU6601                           0x6601
  19 #define PCI_ID_AU6621                           0x6621
  20
  21 #define MHZ_TO_HZ(freq)                         ((freq) * 1000 * 1000)
  22
  23 #define AU6601_BASE_CLOCK                       31000000
  24 #define AU6601_MIN_CLOCK                        150000
  25 #define AU6601_MAX_CLOCK                        208000000
  26 #define AU6601_MAX_DMA_SEGMENTS                 1
  27 #define AU6601_MAX_PIO_SEGMENTS                 1
  28 #define AU6601_MAX_DMA_BLOCK_SIZE               0x1000
  29 #define AU6601_MAX_PIO_BLOCK_SIZE               0x200
  30 #define AU6601_MAX_DMA_BLOCKS                   1
  31 #define AU6601_DMA_LOCAL_SEGMENTS               1
  32
  33 /* registers spotter by reverse engineering but still
  34  * with unknown functionality:
  35  * 0x10 - ADMA phy address. AU6621 only?
  36  * 0x51 - LED ctrl?
  37  * 0x52 - unknown
  38  * 0x61 - LED related? Always toggled BIT0
  39  * 0x63 - Same as 0x61?
  40  * 0x77 - unknown
  41  */
  42
  43 /* SDMA phy address. Higher then 0x0800.0000?
  44  * The au6601 and au6621 have different DMA engines with different issues. One
  45  * For example au6621 engine is triggered by addr change. No other interaction
  46  * is needed. This means, if we get two buffers with same address, then engine
  47  * will stall.
  48  */
  49 #define AU6601_REG_SDMA_ADDR                    0x00
  50 #define AU6601_SDMA_MASK                        0xffffffff
  51
  52 #define AU6601_DMA_BOUNDARY                     0x05
  53 #define AU6621_DMA_PAGE_CNT                     0x05
  54 /* PIO */
  55 #define AU6601_REG_BUFFER                       0x08
  56 /* ADMA ctrl? AU6621 only. */
  57 #define AU6621_DMA_CTRL                         0x0c
  58 #define AU6621_DMA_ENABLE                       BIT(0)
  59 /* CMD index */
  60 #define AU6601_REG_CMD_OPCODE                   0x23
  61 /* CMD parametr */
  62 #define AU6601_REG_CMD_ARG                      0x24
  63 /* CMD response 4x4 Bytes */
  64 #define AU6601_REG_CMD_RSP0                     0x30
  65 #define AU6601_REG_CMD_RSP1                     0x34
  66 #define AU6601_REG_CMD_RSP2                     0x38
  67 #define AU6601_REG_CMD_RSP3                     0x3C
  68 /* default timeout set to 125: 125 * 40ms = 5 sec
  69  * how exactly it is calculated?
  70  */
  71 #define AU6601_TIME_OUT_CTRL                    0x69
  72 /* Block size for SDMA or PIO */
  73 #define AU6601_REG_BLOCK_SIZE                   0x6c
  74 /* Some power related reg, used together with AU6601_OUTPUT_ENABLE */
  75 #define AU6601_POWER_CONTROL                    0x70
  76
  77 /* PLL ctrl */
  78 #define AU6601_CLK_SELECT                       0x72
  79 #define AU6601_CLK_OVER_CLK                     0x80
  80 #define AU6601_CLK_384_MHZ                      0x30
  81 #define AU6601_CLK_125_MHZ                      0x20
  82 #define AU6601_CLK_48_MHZ                       0x10
  83 #define AU6601_CLK_EXT_PLL                      0x04
  84 #define AU6601_CLK_X2_MODE                      0x02
  85 #define AU6601_CLK_ENABLE                       0x01
  86 #define AU6601_CLK_31_25_MHZ                    0x00
  87
  88 #define AU6601_CLK_DIVIDER                      0x73
  89
  90 #define AU6601_INTERFACE_MODE_CTRL              0x74
  91 #define AU6601_DLINK_MODE                       0x80
  92 #define AU6601_INTERRUPT_DELAY_TIME             0x40
  93 #define AU6601_SIGNAL_REQ_CTRL                  0x30
  94 #define AU6601_MS_CARD_WP                       BIT(3)
  95 #define AU6601_SD_CARD_WP                       BIT(0)
  96
  97 /* same register values are used for:
  98  *  - AU6601_OUTPUT_ENABLE
  99  *  - AU6601_POWER_CONTROL
 100  */
 101 #define AU6601_ACTIVE_CTRL                      0x75
 102 #define AU6601_XD_CARD                          BIT(4)
 103 /* AU6601_MS_CARD_ACTIVE - will cativate MS card section? */
 104 #define AU6601_MS_CARD                          BIT(3)
 105 #define AU6601_SD_CARD                          BIT(0)
 106
 107 /* card slot state. It should automatically detect type of
 108  * the card
 109  */
 110 #define AU6601_DETECT_STATUS                    0x76
 111 #define AU6601_DETECT_EN                        BIT(7)
 112 #define AU6601_MS_DETECTED                      BIT(3)
 113 #define AU6601_SD_DETECTED                      BIT(0)
 114 #define AU6601_DETECT_STATUS_M                  0xf
 115
 116 #define AU6601_REG_SW_RESET                     0x79
 117 #define AU6601_BUF_CTRL_RESET                   BIT(7)
 118 #define AU6601_RESET_DATA                       BIT(3)
 119 #define AU6601_RESET_CMD                        BIT(0)
 120
 121 #define AU6601_OUTPUT_ENABLE                    0x7a
 122
 123 #define AU6601_PAD_DRIVE0                       0x7b
 124 #define AU6601_PAD_DRIVE1                       0x7c
 125 #define AU6601_PAD_DRIVE2                       0x7d
 126 /* read EEPROM? */
 127 #define AU6601_FUNCTION                         0x7f
 128
 129 #define AU6601_CMD_XFER_CTRL                    0x81
 130 #define AU6601_CMD_17_BYTE_CRC                  0xc0
 131 #define AU6601_CMD_6_BYTE_WO_CRC                0x80
 132 #define AU6601_CMD_6_BYTE_CRC                   0x40
 133 #define AU6601_CMD_START_XFER                   0x20
 134 #define AU6601_CMD_STOP_WAIT_RDY                0x10
 135 #define AU6601_CMD_NO_RESP                      0x00
 136
 137 #define AU6601_REG_BUS_CTRL                     0x82
 138 #define AU6601_BUS_WIDTH_4BIT                   0x20
 139 #define AU6601_BUS_WIDTH_8BIT                   0x10
 140 #define AU6601_BUS_WIDTH_1BIT                   0x00
 141
 142 #define AU6601_DATA_XFER_CTRL                   0x83
 143 #define AU6601_DATA_WRITE                       BIT(7)
 144 #define AU6601_DATA_DMA_MODE                    BIT(6)
 145 #define AU6601_DATA_START_XFER                  BIT(0)
 146
 147 #define AU6601_DATA_PIN_STATE                   0x84
 148 #define AU6601_BUS_STAT_CMD                     BIT(15)
 149 /* BIT(4) - BIT(7) are permanently 1.
 150  * May be reserved or not attached DAT4-DAT7
 151  */
 152 #define AU6601_BUS_STAT_DAT3                    BIT(3)
 153 #define AU6601_BUS_STAT_DAT2                    BIT(2)
 154 #define AU6601_BUS_STAT_DAT1                    BIT(1)
 155 #define AU6601_BUS_STAT_DAT0                    BIT(0)
 156 #define AU6601_BUS_STAT_DAT_MASK                0xf
 157
 158 #define AU6601_OPT                              0x85
 159 #define AU6601_OPT_CMD_LINE_LEVEL               0x80
 160 #define AU6601_OPT_NCRC_16_CLK                  BIT(4)
 161 #define AU6601_OPT_CMD_NWT                      BIT(3)
 162 #define AU6601_OPT_STOP_CLK                     BIT(2)
 163 #define AU6601_OPT_DDR_MODE                     BIT(1)
 164 #define AU6601_OPT_SD_18V                       BIT(0)
 165
 166 #define AU6601_CLK_DELAY                        0x86
 167 #define AU6601_CLK_DATA_POSITIVE_EDGE           0x80
 168 #define AU6601_CLK_CMD_POSITIVE_EDGE            0x40
 169 #define AU6601_CLK_POSITIVE_EDGE_ALL            (AU6601_CLK_CMD_POSITIVE_EDGE \
 170                                                 | AU6601_CLK_DATA_POSITIVE_EDGE)
 171
 172
 173 #define AU6601_REG_INT_STATUS                   0x90
 174 #define AU6601_REG_INT_ENABLE                   0x94
 175 #define AU6601_INT_DATA_END_BIT_ERR             BIT(22)
 176 #define AU6601_INT_DATA_CRC_ERR                 BIT(21)
 177 #define AU6601_INT_DATA_TIMEOUT_ERR             BIT(20)
 178 #define AU6601_INT_CMD_INDEX_ERR                BIT(19)
 179 #define AU6601_INT_CMD_END_BIT_ERR              BIT(18)
 180 #define AU6601_INT_CMD_CRC_ERR                  BIT(17)
 181 #define AU6601_INT_CMD_TIMEOUT_ERR              BIT(16)
 182 #define AU6601_INT_ERROR                        BIT(15)
 183 #define AU6601_INT_OVER_CURRENT_ERR             BIT(8)
 184 #define AU6601_INT_CARD_INSERT                  BIT(7)
 185 #define AU6601_INT_CARD_REMOVE                  BIT(6)
 186 #define AU6601_INT_READ_BUF_RDY                 BIT(5)
 187 #define AU6601_INT_WRITE_BUF_RDY                BIT(4)
 188 #define AU6601_INT_DMA_END                      BIT(3)
 189 #define AU6601_INT_DATA_END                     BIT(1)
 190 #define AU6601_INT_CMD_END                      BIT(0)
 191
 192 #define AU6601_INT_NORMAL_MASK                  0x00007FFF
 193 #define AU6601_INT_ERROR_MASK                   0xFFFF8000
 194
 195 #define AU6601_INT_CMD_MASK     (AU6601_INT_CMD_END | \
 196                 AU6601_INT_CMD_TIMEOUT_ERR | AU6601_INT_CMD_CRC_ERR | \
 197                 AU6601_INT_CMD_END_BIT_ERR | AU6601_INT_CMD_INDEX_ERR)
 198 #define AU6601_INT_DATA_MASK    (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \
 199                 AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY | \
 200                 AU6601_INT_DATA_TIMEOUT_ERR | AU6601_INT_DATA_CRC_ERR | \
 201                 AU6601_INT_DATA_END_BIT_ERR)
 202 #define AU6601_INT_ALL_MASK                     ((u32)-1)
 203
 204 /* MS_CARD mode registers */
 205
 206 #define AU6601_MS_STATUS                        0xa0
 207
 208 #define AU6601_MS_BUS_MODE_CTRL                 0xa1
 209 #define AU6601_MS_BUS_8BIT_MODE                 0x03
 210 #define AU6601_MS_BUS_4BIT_MODE                 0x01
 211 #define AU6601_MS_BUS_1BIT_MODE                 0x00
 212
 213 #define AU6601_MS_TPC_CMD                       0xa2
 214 #define AU6601_MS_TPC_READ_PAGE_DATA            0x02
 215 #define AU6601_MS_TPC_READ_REG                  0x04
 216 #define AU6601_MS_TPC_GET_INT                   0x07
 217 #define AU6601_MS_TPC_WRITE_PAGE_DATA           0x0D
 218 #define AU6601_MS_TPC_WRITE_REG                 0x0B
 219 #define AU6601_MS_TPC_SET_RW_REG_ADRS           0x08
 220 #define AU6601_MS_TPC_SET_CMD                   0x0E
 221 #define AU6601_MS_TPC_EX_SET_CMD                0x09
 222 #define AU6601_MS_TPC_READ_SHORT_DATA           0x03
 223 #define AU6601_MS_TPC_WRITE_SHORT_DATA          0x0C
 224
 225 #define AU6601_MS_TRANSFER_MODE                 0xa3
 226 #define AU6601_MS_XFER_INT_TIMEOUT_CHK          BIT(2)
 227 #define AU6601_MS_XFER_DMA_ENABLE               BIT(1)
 228 #define AU6601_MS_XFER_START                    BIT(0)
 229
 230 #define AU6601_MS_DATA_PIN_STATE                0xa4
 231
 232 #define AU6601_MS_INT_STATUS                    0xb0
 233 #define AU6601_MS_INT_ENABLE                    0xb4
 234 #define AU6601_MS_INT_OVER_CURRENT_ERROR        BIT(23)
 235 #define AU6601_MS_INT_DATA_CRC_ERROR            BIT(21)
 236 #define AU6601_MS_INT_INT_TIMEOUT               BIT(20)
 237 #define AU6601_MS_INT_INT_RESP_ERROR            BIT(19)
 238 #define AU6601_MS_INT_CED_ERROR                 BIT(18)
 239 #define AU6601_MS_INT_TPC_TIMEOUT               BIT(16)
 240 #define AU6601_MS_INT_ERROR                     BIT(15)
 241 #define AU6601_MS_INT_CARD_INSERT               BIT(7)
 242 #define AU6601_MS_INT_CARD_REMOVE               BIT(6)
 243 #define AU6601_MS_INT_BUF_READ_RDY              BIT(5)
 244 #define AU6601_MS_INT_BUF_WRITE_RDY             BIT(4)
 245 #define AU6601_MS_INT_DMA_END                   BIT(3)
 246 #define AU6601_MS_INT_TPC_END                   BIT(1)
 247
 248 #define AU6601_MS_INT_DATA_MASK                 0x00000038
 249 #define AU6601_MS_INT_TPC_MASK                  0x003d8002
 250 #define AU6601_MS_INT_TPC_ERROR                 0x003d0000
 251
 252 #define ALCOR_PCIE_LINK_CTRL_OFFSET             0x10
 253 #define ALCOR_PCIE_LINK_CAP_OFFSET              0x0c
 254 #define ALCOR_CAP_START_OFFSET                  0x34
 255
 256 struct alcor_dev_cfg {
 257         u8      dma;
 258 };
 259
 260 struct alcor_pci_priv {
 261         struct pci_dev *pdev;
 262         struct pci_dev *parent_pdev;
 263         struct  device *dev;
 264         void __iomem *iobase;
 265         unsigned int irq;
 266
 267         unsigned long id; /* idr id */
 268
 269         struct alcor_dev_cfg    *cfg;
 270
 271         /* PCI ASPM related vars */
 272         int pdev_cap_off;
 273         u8  pdev_aspm_cap;
 274         int parent_cap_off;
 275         u8  parent_aspm_cap;
 276         u8 ext_config_dev_aspm;
 277 };
 278
 279 void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr);
 280 void alcor_write16(struct alcor_pci_priv *priv, u16 val, unsigned int addr);
 281 void alcor_write32(struct alcor_pci_priv *priv, u32 val, unsigned int addr);
 282 void alcor_write32be(struct alcor_pci_priv *priv, u32 val, unsigned int addr);
 283 u8 alcor_read8(struct alcor_pci_priv *priv, unsigned int addr);
 284 u32 alcor_read32(struct alcor_pci_priv *priv, unsigned int addr);
 285 u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr);
 286 #endif