]>
git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - include/linux/arcdevice.h
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. NET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
6 * Definitions used by the ARCnet driver.
8 * Authors: Avery Pennarun and David Woodhouse
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
16 #ifndef _LINUX_ARCDEVICE_H
17 #define _LINUX_ARCDEVICE_H
19 #include <asm/timex.h>
20 #include <linux/if_arcnet.h>
29 * RECON_THRESHOLD is the maximum number of RECON messages to receive
30 * within one minute before printing a "cabling problem" warning. The
31 * default value should be fine.
33 * After that, a "cabling restored" message will be printed on the next IRQ
34 * if no RECON messages have been received for 10 seconds.
36 * Do not define RECON_THRESHOLD at all if you want to disable this feature.
38 #define RECON_THRESHOLD 30
42 * Define this to the minimum "timeout" value. If a transmit takes longer
43 * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large
44 * network, or one with heavy network traffic, this timeout may need to be
45 * increased. The larger it is, though, the longer it will be between
46 * necessary transmits - don't set this too high.
48 #define TX_TIMEOUT (HZ * 200 / 1000)
51 /* Display warnings about the driver being an ALPHA version. */
56 * Debugging bitflags: each option can be enabled individually.
58 * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
59 * actually be available. GCC will (at least, GCC 2.7.0 will) notice
60 * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
63 #define D_NORMAL 1 /* important operational info */
64 #define D_EXTRA 2 /* useful, but non-vital information */
65 #define D_INIT 4 /* show init/probe messages */
66 #define D_INIT_REASONS 8 /* show reasons for discarding probes */
67 #define D_RECON 32 /* print a message whenever token is lost */
68 #define D_PROTO 64 /* debug auto-protocol support */
69 /* debug levels below give LOTS of output during normal operation! */
70 #define D_DURING 128 /* trace operations (including irq's) */
71 #define D_TX 256 /* show tx packets */
72 #define D_RX 512 /* show rx packets */
73 #define D_SKB 1024 /* show skb's */
74 #define D_SKB_SIZE 2048 /* show skb sizes */
75 #define D_TIMING 4096 /* show time needed to copy buffers to card */
76 #define D_DEBUG 8192 /* Very detailed debug line for line */
78 #ifndef ARCNET_DEBUG_MAX
79 #define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */
83 #define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
85 extern int arcnet_debug
;
87 /* macros to simplify debug checking */
88 #define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
89 #define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
90 #define BUGMSG(x,msg,args...) \
91 BUGMSG2(x, "%s%6s: " msg, \
92 x==D_NORMAL ? KERN_WARNING \
93 : x < D_DURING ? KERN_INFO : KERN_DEBUG, \
96 /* see how long a function call takes to run, expressed in CPU cycles */
97 #define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
98 unsigned long _x, _y; \
103 "%s: %d bytes in %lu cycles == " \
104 "%lu Kbytes/100Mcycle\n",\
105 name, bytes, _y - _x, \
106 100000000 / 1024 * bytes / (_y - _x + 1));\
114 * Time needed to reset the card - in ms (milliseconds). This works on my
115 * SMC PC100. I can't find a reference that tells me just how long I
118 #define RESETtime (300)
121 * These are the max/min lengths of packet payload, not including the
122 * arc_hardware header, but definitely including the soft header.
124 * Note: packet sizes 254, 255, 256 are impossible because of the way
125 * ARCnet registers work That's why RFC1201 defines "exception" packets.
126 * In non-RFC1201 protocols, we have to just tack some extra bytes on the
129 #define MTU 253 /* normal packet max size */
130 #define MinTU 257 /* extended packet min size */
131 #define XMTU 508 /* extended packet max size */
133 /* status/interrupt mask bit fields */
134 #define TXFREEflag 0x01 /* transmitter available */
135 #define TXACKflag 0x02 /* transmitted msg. ackd */
136 #define RECONflag 0x04 /* network reconfigured */
137 #define TESTflag 0x08 /* test flag */
138 #define EXCNAKflag 0x08 /* excesive nak flag */
139 #define RESETflag 0x10 /* power-on-reset */
140 #define RES1flag 0x20 /* reserved - usually set by jumper */
141 #define RES2flag 0x40 /* reserved - usually set by jumper */
142 #define NORXflag 0x80 /* receiver inhibited */
144 /* Flags used for IO-mapped memory operations */
145 #define AUTOINCflag 0x40 /* Increase location with each access */
146 #define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */
147 #define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */
149 /* in the command register, the following bits have these meanings:
151 * 3-4 page number (for enable rcv/xmt command)
152 * 7 receive broadcasts
154 #define NOTXcmd 0x01 /* disable transmitter */
155 #define NORXcmd 0x02 /* disable receiver */
156 #define TXcmd 0x03 /* enable transmitter */
157 #define RXcmd 0x04 /* enable receiver */
158 #define CONFIGcmd 0x05 /* define configuration */
159 #define CFLAGScmd 0x06 /* clear flags */
160 #define TESTcmd 0x07 /* load test flags */
162 /* flags for "clear flags" command */
163 #define RESETclear 0x08 /* power-on-reset */
164 #define CONFIGclear 0x10 /* system reconfigured */
166 #define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */
168 /* flags for "load test flags" command */
169 #define TESTload 0x08 /* test flag (diagnostic) */
171 /* byte deposited into first address of buffers on reset */
172 #define TESTvalue 0321 /* that's octal for 0xD1 :) */
174 /* for "enable receiver" command */
175 #define RXbcasts 0x80 /* receive broadcasts */
177 /* flags for "define configuration" command */
178 #define NORMALconf 0x00 /* 1-249 byte packets */
179 #define EXTconf 0x08 /* 250-504 byte packets */
181 /* card feature flags, set during auto-detection.
182 * (currently only used by com20020pci)
184 #define ARC_IS_5MBIT 1 /* card default speed is 5MBit */
185 #define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit,
186 but default is 2.5MBit. */
189 /* information needed to define an encapsulation driver */
191 char suffix
; /* a for RFC1201, e for ether-encap, etc. */
192 int mtu
; /* largest possible packet */
193 int is_ip
; /* This is a ip plugin - not a raw thing */
195 void (*rx
) (struct net_device
* dev
, int bufnum
,
196 struct archdr
* pkthdr
, int length
);
197 int (*build_header
) (struct sk_buff
* skb
, struct net_device
*dev
,
198 unsigned short ethproto
, uint8_t daddr
);
200 /* these functions return '1' if the skb can now be freed */
201 int (*prepare_tx
) (struct net_device
* dev
, struct archdr
* pkt
, int length
,
203 int (*continue_tx
) (struct net_device
* dev
, int bufnum
);
204 int (*ack_tx
) (struct net_device
* dev
, int acked
);
207 extern struct ArcProto
*arc_proto_map
[256], *arc_proto_default
,
208 *arc_bcast_proto
, *arc_raw_proto
;
209 extern struct ArcProto arc_proto_null
;
213 * "Incoming" is information needed for each address that could be sending
214 * to us. Mostly for partially-received split packets.
217 struct sk_buff
*skb
; /* packet data buffer */
218 uint16_t sequence
; /* sequence number of assembly */
219 uint8_t lastpacket
, /* number of last packet (from 1) */
220 numpackets
; /* number of packets in split */
224 /* only needed for RFC1201 */
226 struct ArcProto
*proto
; /* protocol driver that owns this:
227 * if NULL, no packet is pending.
229 struct sk_buff
*skb
; /* buffer from upper levels */
230 struct archdr
*pkt
; /* a pointer into the skb */
231 uint16_t length
, /* bytes total */
232 dataleft
, /* bytes left */
233 segnum
, /* segment being sent */
234 numsegs
; /* number of segments */
238 struct arcnet_local
{
239 struct net_device_stats stats
;
241 uint8_t config
, /* current value of CONFIG register */
242 timeout
, /* Extended timeout for COM20020 */
243 backplane
, /* Backplane flag for COM20020 */
244 clockp
, /* COM20020 clock divider */
245 clockm
, /* COM20020 clock multiplier flag */
246 setup
, /* Contents of setup1 register */
247 setup2
, /* Contents of setup2 register */
248 intmask
; /* current value of INTMASK register */
249 uint8_t default_proto
[256]; /* default encap to use for each host */
250 int cur_tx
, /* buffer used by current transmit, or -1 */
251 next_tx
, /* buffer where a packet is ready to send */
252 cur_rx
; /* current receive buffer */
253 int lastload_dest
, /* can last loaded packet be acked? */
254 lasttrans_dest
; /* can last TX'd packet be acked? */
255 int timed_out
; /* need to process TX timeout and drop packet */
256 unsigned long last_timeout
; /* time of last reported timeout */
257 char *card_name
; /* card ident string */
258 int card_flags
; /* special card features */
261 /* On preemtive and SMB a lock is needed */
265 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
266 * which can be used for either sending or receiving. The new dynamic
267 * buffer management routines use a simple circular queue of available
268 * buffers, and take them as they're needed. This way, we simplify
269 * situations in which we (for example) want to pre-load a transmit
270 * buffer, or start receiving while we copy a received packet to
273 * The rules: only the interrupt handler is allowed to _add_ buffers to
274 * the queue; thus, this doesn't require a lock. Both the interrupt
275 * handler and the transmit function will want to _remove_ buffers, so
276 * we need to handle the situation where they try to do it at the same
279 * If next_buf == first_free_buf, the queue is empty. Since there are
280 * only four possible buffers, the queue should never be full.
284 int next_buf
, first_free_buf
;
286 /* network "reconfiguration" handling */
287 time_t first_recon
, /* time of "first" RECON message to count */
288 last_recon
; /* time of most recent RECON */
289 int num_recons
; /* number of RECONs between first and last. */
290 bool network_down
; /* do we think the network is down? */
292 bool excnak_pending
; /* We just got an excesive nak interrupt */
295 uint16_t sequence
; /* sequence number (incs with each packet) */
296 uint16_t aborted_seq
;
298 struct Incoming incoming
[256]; /* one from each address */
301 /* really only used by rfc1201, but we'll pretend it's not */
302 struct Outgoing outgoing
; /* packet currently being sent */
304 /* hardware-specific functions */
306 struct module
*owner
;
307 void (*command
) (struct net_device
* dev
, int cmd
);
308 int (*status
) (struct net_device
* dev
);
309 void (*intmask
) (struct net_device
* dev
, int mask
);
310 bool (*reset
) (struct net_device
* dev
, bool really_reset
);
311 void (*open
) (struct net_device
* dev
);
312 void (*close
) (struct net_device
* dev
);
314 void (*copy_to_card
) (struct net_device
* dev
, int bufnum
, int offset
,
315 void *buf
, int count
);
316 void (*copy_from_card
) (struct net_device
* dev
, int bufnum
, int offset
,
317 void *buf
, int count
);
320 void __iomem
*mem_start
; /* pointer to ioremap'ed MMIO */
324 #define ARCRESET(x) (lp->hw.reset(dev, (x)))
325 #define ACOMMAND(x) (lp->hw.command(dev, (x)))
326 #define ASTATUS() (lp->hw.status(dev))
327 #define AINTMASK(x) (lp->hw.intmask(dev, (x)))
331 #if ARCNET_DEBUG_MAX & D_SKB
332 void arcnet_dump_skb(struct net_device
*dev
, struct sk_buff
*skb
, char *desc
);
334 #define arcnet_dump_skb(dev,skb,desc) ;
337 #if (ARCNET_DEBUG_MAX & D_RX) || (ARCNET_DEBUG_MAX & D_TX)
338 void arcnet_dump_packet(struct net_device
*dev
, int bufnum
, char *desc
,
339 int take_arcnet_lock
);
341 #define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) ;
344 void arcnet_unregister_proto(struct ArcProto
*proto
);
345 irqreturn_t
arcnet_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
);
346 struct net_device
*alloc_arcdev(char *name
);
347 void arcnet_rx(struct net_device
*dev
, int bufnum
);
349 #endif /* __KERNEL__ */
350 #endif /* _LINUX_ARCDEVICE_H */