]>
git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - include/linux/atmdev.h
1 /* atmdev.h - ATM device driver declarations and various related items */
3 /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
10 #include <linux/atmapi.h>
11 #include <linux/atm.h>
12 #include <linux/atmioc.h>
17 #define ATM_OC3_PCR (155520000/270*260/8/53)
18 /* OC3 link rate: 155520000 bps
19 SONET overhead: /270*260 (9 section, 1 path)
21 max cell rate: 353207.547 cells/sec */
22 #define ATM_25_PCR ((25600000/8-8000)/54)
23 /* 25 Mbps ATM cell rate (59111) */
24 #define ATM_OC12_PCR (622080000/1080*1040/8/53)
25 /* OC12 link rate: 622080000 bps
26 SONET overhead: /1080*1040
28 max cell rate: 1412830.188 cells/sec */
29 #define ATM_DS3_PCR (8000*12)
30 /* DS3: 12 cells in a 125 usec time slot */
33 #define __AAL_STAT_ITEMS \
34 __HANDLE_ITEM(tx); /* TX okay */ \
35 __HANDLE_ITEM(tx_err); /* TX errors */ \
36 __HANDLE_ITEM(rx); /* RX okay */ \
37 __HANDLE_ITEM(rx_err); /* RX errors */ \
38 __HANDLE_ITEM(rx_drop); /* RX out of memory */
40 struct atm_aal_stats
{
41 #define __HANDLE_ITEM(i) int i
47 struct atm_dev_stats
{
48 struct atm_aal_stats aal0
;
49 struct atm_aal_stats aal34
;
50 struct atm_aal_stats aal5
;
54 #define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
56 #define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
57 /* get interface names (numbers) */
58 #define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
59 /* get interface type name */
60 #define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
61 /* get interface ESI */
62 #define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
63 /* get itf's local ATM addr. list */
64 #define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
65 /* reset itf's ATM address list */
66 #define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
67 /* add a local ATM address */
68 #define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
69 /* remove a local ATM address */
70 #define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
71 /* get connection identifier range */
72 #define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
73 /* set connection identifier range */
74 #define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
75 /* set interface ESI */
76 #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
77 /* force interface ESI */
78 #define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
79 /* register a LECS address */
80 #define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
81 /* unregister a LECS address */
82 #define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
83 /* retrieve LECS address(es) */
85 #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
86 /* get AAL layer statistics */
87 #define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
88 /* get AAL layer statistics and zero */
89 #define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
90 /* get loopback mode */
91 #define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
92 /* set loopback mode */
93 #define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
94 /* query supported loopback modes */
95 #define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
96 /* enable or disable single-copy */
97 #define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
98 /* set backend handler */
99 #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
100 /* use backend to make new if */
101 #define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
102 /* add party to p2mp call */
103 #define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
104 /* drop party from p2mp call */
107 * These are backend handkers that can be set via the ATM_SETBACKEND call
108 * above. In the future we may support dynamic loading of these - for now,
109 * they're just being used to share the ATMIOC_BACKEND ioctls
111 #define ATM_BACKEND_RAW 0
112 #define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
113 #define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
115 /* for ATM_GETTYPE */
116 #define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
119 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
122 /* Point of loopback CPU-->SAR-->PHY-->line--> ... */
123 #define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
124 #define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
125 #define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
126 /* RESERVED 4 loop back on PHY side ---' */
127 #define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
128 #define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
130 /* Direction of loopback */
131 #define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
132 #define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
134 #define __ATM_LM_XTLOC(n) ((n) & 0xff)
135 #define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
137 #define ATM_LM_NONE 0 /* no loopback */
139 #define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
140 #define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
141 #define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
142 #define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
144 #define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
145 #define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
146 #define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
147 #define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
150 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
151 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
160 /* for ATM_GETCIRANGE / ATM_SETCIRANGE */
162 #define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
165 signed char vpi_bits
; /* 1..8, ATM_CI_MAX (-1) for maximum */
166 signed char vci_bits
; /* 1..16, ATM_CI_MAX (-1) for maximum */
169 /* for ATM_SETSC; actually taken from the ATM_VF number space */
171 #define ATM_SC_RX 1024 /* enable RX single-copy */
172 #define ATM_SC_TX 2048 /* enable TX single-copy */
174 #define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
177 /* MF: change_qos (Modify) flags */
179 #define ATM_MF_IMMED 1 /* Block until change is effective */
180 #define ATM_MF_INC_RSV 2 /* Change reservation on increase */
181 #define ATM_MF_INC_SHP 4 /* Change shaping on increase */
182 #define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
183 #define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
184 #define ATM_MF_BWD 32 /* Set the backward direction parameters */
186 #define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
187 ATM_MF_DEC_SHP | ATM_MF_BWD)
190 * ATM_VS_* are used to express VC state in a human-friendly way.
193 #define ATM_VS_IDLE 0 /* VC is not used */
194 #define ATM_VS_CONNECTED 1 /* VC is connected */
195 #define ATM_VS_CLOSING 2 /* VC is closing */
196 #define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
197 #define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
198 #define ATM_VS_BOUND 5 /* VC is bound */
200 #define ATM_VS2TXT_MAP \
201 "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
203 #define ATM_VF2TXT_MAP \
204 "ADDR", "READY", "PARTIAL", "REGIS", \
205 "RELEASED", "HASQOS", "LISTEN", "META", \
206 "256", "512", "1024", "2048", \
207 "SESSION", "HASSAP", "BOUND", "CLOSE"
212 #include <linux/device.h>
213 #include <linux/wait.h> /* wait_queue_head_t */
214 #include <linux/time.h> /* struct timeval */
215 #include <linux/net.h>
216 #include <linux/skbuff.h> /* struct sk_buff */
217 #include <linux/uio.h>
218 #include <net/sock.h>
219 #include <asm/atomic.h>
221 #ifdef CONFIG_PROC_FS
222 #include <linux/proc_fs.h>
224 extern struct proc_dir_entry
*atm_proc_root
;
228 struct k_atm_aal_stats
{
229 #define __HANDLE_ITEM(i) atomic_t i
235 struct k_atm_dev_stats
{
236 struct k_atm_aal_stats aal0
;
237 struct k_atm_aal_stats aal34
;
238 struct k_atm_aal_stats aal5
;
243 ATM_VF_ADDR
, /* Address is in use. Set by anybody, cleared
245 ATM_VF_READY
, /* VC is ready to transfer data. Set by device
246 driver, cleared by anybody. */
247 ATM_VF_PARTIAL
, /* resources are bound to PVC (partial PVC
248 setup), controlled by socket layer */
249 ATM_VF_REGIS
, /* registered with demon, controlled by SVC
251 ATM_VF_BOUND
, /* local SAP is set, controlled by SVC socket
253 ATM_VF_RELEASED
, /* demon has indicated/requested release,
254 controlled by SVC socket layer */
255 ATM_VF_HASQOS
, /* QOS parameters have been set */
256 ATM_VF_LISTEN
, /* socket is used for listening */
257 ATM_VF_META
, /* SVC socket isn't used for normal data
258 traffic and doesn't depend on signaling
260 ATM_VF_SESSION
, /* VCC is p2mp session control descriptor */
261 ATM_VF_HASSAP
, /* SAP has been set */
262 ATM_VF_CLOSE
, /* asynchronous close - treat like VF_RELEASED*/
263 ATM_VF_WAITING
, /* waiting for reply from sigd */
264 ATM_VF_IS_CLIP
, /* in use by CLIP protocol */
268 #define ATM_VF2VS(flags) \
269 (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
270 test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
271 test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
272 test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
273 test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
277 ATM_DF_REMOVED
, /* device was removed from atm_devs list */
281 #define ATM_PHY_SIG_LOST 0 /* no carrier/light */
282 #define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
283 #define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
285 #define ATM_ATMOPT_CLP 1 /* set CLP bit */
288 /* struct sock has to be the first member of atm_vcc */
290 unsigned long flags
; /* VCC flags (ATM_VF_*) */
291 short vpi
; /* VPI and VCI (types must be equal */
294 unsigned long aal_options
; /* AAL layer options */
295 unsigned long atm_options
; /* ATM layer options */
296 struct atm_dev
*dev
; /* device back pointer */
297 struct atm_qos qos
; /* QOS */
298 struct atm_sap sap
; /* SAP */
299 void (*push
)(struct atm_vcc
*vcc
,struct sk_buff
*skb
);
300 void (*pop
)(struct atm_vcc
*vcc
,struct sk_buff
*skb
); /* optional */
301 int (*push_oam
)(struct atm_vcc
*vcc
,void *cell
);
302 int (*send
)(struct atm_vcc
*vcc
,struct sk_buff
*skb
);
303 void *dev_data
; /* per-device data */
304 void *proto_data
; /* per-protocol data */
305 struct k_atm_aal_stats
*stats
; /* pointer to AAL stats group */
306 /* SVC part --- may move later ------------------------------------- */
307 short itf
; /* interface number */
308 struct sockaddr_atmsvc local
;
309 struct sockaddr_atmsvc remote
;
310 /* Multipoint part ------------------------------------------------- */
311 struct atm_vcc
*session
; /* session VCC descriptor */
312 /* Other stuff ----------------------------------------------------- */
313 void *user_back
; /* user backlink - not touched by */
314 /* native ATM stack. Currently used */
315 /* by CLIP and sch_atm. */
318 static inline struct atm_vcc
*atm_sk(struct sock
*sk
)
320 return (struct atm_vcc
*)sk
;
323 static inline struct atm_vcc
*ATM_SD(struct socket
*sock
)
325 return atm_sk(sock
->sk
);
328 static inline struct sock
*sk_atm(struct atm_vcc
*vcc
)
330 return (struct sock
*)vcc
;
333 struct atm_dev_addr
{
334 struct sockaddr_atmsvc addr
; /* ATM address */
335 struct list_head entry
; /* next address */
338 enum atm_addr_type_t
{ ATM_ADDR_LOCAL
, ATM_ADDR_LECS
};
341 const struct atmdev_ops
*ops
; /* device operations; NULL if unused */
342 const struct atmphy_ops
*phy
; /* PHY operations, may be undefined */
344 const char *type
; /* device type name */
345 int number
; /* device index */
346 void *dev_data
; /* per-device data */
347 void *phy_data
; /* private PHY date */
348 unsigned long flags
; /* device flags (ATM_DF_*) */
349 struct list_head local
; /* local ATM addresses */
350 struct list_head lecs
; /* LECS ATM addresses learned via ILMI */
351 unsigned char esi
[ESI_LEN
]; /* ESI ("MAC" addr) */
352 struct atm_cirange ci_range
; /* VPI/VCI range */
353 struct k_atm_dev_stats stats
; /* statistics */
354 char signal
; /* signal status (ATM_PHY_SIG_*) */
355 int link_rate
; /* link rate (default: OC3) */
356 atomic_t refcnt
; /* reference count */
357 spinlock_t lock
; /* protect internal members */
358 #ifdef CONFIG_PROC_FS
359 struct proc_dir_entry
*proc_entry
; /* proc entry */
360 char *proc_name
; /* proc entry name */
362 struct device class_dev
; /* sysfs device */
363 struct list_head dev_list
; /* linkage */
367 /* OF: send_Oam Flags */
369 #define ATM_OF_IMMED 1 /* Attempt immediate delivery */
370 #define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
374 * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
377 struct atmdev_ops
{ /* only send is required */
378 void (*dev_close
)(struct atm_dev
*dev
);
379 int (*open
)(struct atm_vcc
*vcc
);
380 void (*close
)(struct atm_vcc
*vcc
);
381 int (*ioctl
)(struct atm_dev
*dev
,unsigned int cmd
,void __user
*arg
);
382 int (*getsockopt
)(struct atm_vcc
*vcc
,int level
,int optname
,
383 void __user
*optval
,int optlen
);
384 int (*setsockopt
)(struct atm_vcc
*vcc
,int level
,int optname
,
385 void __user
*optval
,int optlen
);
386 int (*send
)(struct atm_vcc
*vcc
,struct sk_buff
*skb
);
387 int (*send_oam
)(struct atm_vcc
*vcc
,void *cell
,int flags
);
388 void (*phy_put
)(struct atm_dev
*dev
,unsigned char value
,
390 unsigned char (*phy_get
)(struct atm_dev
*dev
,unsigned long addr
);
391 int (*change_qos
)(struct atm_vcc
*vcc
,struct atm_qos
*qos
,int flags
);
392 int (*proc_read
)(struct atm_dev
*dev
,loff_t
*pos
,char *page
);
393 struct module
*owner
;
397 int (*start
)(struct atm_dev
*dev
);
398 int (*ioctl
)(struct atm_dev
*dev
,unsigned int cmd
,void __user
*arg
);
399 void (*interrupt
)(struct atm_dev
*dev
);
400 int (*stop
)(struct atm_dev
*dev
);
403 struct atm_skb_data
{
404 struct atm_vcc
*vcc
; /* ATM VCC */
405 unsigned long atm_options
; /* ATM layer options */
408 #define VCC_HTABLE_SIZE 32
410 extern struct hlist_head vcc_hash
[VCC_HTABLE_SIZE
];
411 extern rwlock_t vcc_sklist_lock
;
413 #define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
415 struct atm_dev
*atm_dev_register(const char *type
,const struct atmdev_ops
*ops
,
416 int number
,unsigned long *flags
); /* number == -1: pick first available */
417 struct atm_dev
*atm_dev_lookup(int number
);
418 void atm_dev_deregister(struct atm_dev
*dev
);
419 void vcc_insert_socket(struct sock
*sk
);
423 * This is approximately the algorithm used by alloc_skb.
427 static inline int atm_guess_pdu2truesize(int size
)
429 return (SKB_DATA_ALIGN(size
) + sizeof(struct skb_shared_info
));
433 static inline void atm_force_charge(struct atm_vcc
*vcc
,int truesize
)
435 atomic_add(truesize
, &sk_atm(vcc
)->sk_rmem_alloc
);
439 static inline void atm_return(struct atm_vcc
*vcc
,int truesize
)
441 atomic_sub(truesize
, &sk_atm(vcc
)->sk_rmem_alloc
);
445 static inline int atm_may_send(struct atm_vcc
*vcc
,unsigned int size
)
447 return (size
+ atomic_read(&sk_atm(vcc
)->sk_wmem_alloc
)) <
448 sk_atm(vcc
)->sk_sndbuf
;
452 static inline void atm_dev_hold(struct atm_dev
*dev
)
454 atomic_inc(&dev
->refcnt
);
458 static inline void atm_dev_put(struct atm_dev
*dev
)
460 if (atomic_dec_and_test(&dev
->refcnt
)) {
461 BUG_ON(!test_bit(ATM_DF_REMOVED
, &dev
->flags
));
462 if (dev
->ops
->dev_close
)
463 dev
->ops
->dev_close(dev
);
464 put_device(&dev
->class_dev
);
469 int atm_charge(struct atm_vcc
*vcc
,int truesize
);
470 struct sk_buff
*atm_alloc_charge(struct atm_vcc
*vcc
,int pdu_size
,
472 int atm_pcr_goal(const struct atm_trafprm
*tp
);
474 void vcc_release_async(struct atm_vcc
*vcc
, int reply
);
477 struct module
*owner
;
478 /* A module reference is kept if appropriate over this call.
479 * Return -ENOIOCTLCMD if you don't handle it. */
480 int (*ioctl
)(struct socket
*, unsigned int cmd
, unsigned long arg
);
481 struct list_head list
;
485 * register_atm_ioctl - register handler for ioctl operations
487 * Special (non-device) handlers of ioctl's should
488 * register here. If you're a normal device, you should
489 * set .ioctl in your atmdev_ops instead.
491 void register_atm_ioctl(struct atm_ioctl
*);
494 * deregister_atm_ioctl - remove the ioctl handler
496 void deregister_atm_ioctl(struct atm_ioctl
*);
498 #endif /* __KERNEL__ */