]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - include/linux/atmel_tc.h
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux...
[mirror_ubuntu-artful-kernel.git] / include / linux / atmel_tc.h
1 /*
2 * Timer/Counter Unit (TC) registers.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9
10 #ifndef ATMEL_TC_H
11 #define ATMEL_TC_H
12
13 #include <linux/compiler.h>
14 #include <linux/list.h>
15
16 /*
17 * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
18 * three general-purpose 16-bit timers. These timers share one register bank.
19 * Depending on the SOC, each timer may have its own clock and IRQ, or those
20 * may be shared by the whole TC block.
21 *
22 * These TC blocks may have up to nine external pins: TCLK0..2 signals for
23 * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
24 * or triggering. Those pins need to be set up for use with the TC block,
25 * else they will be used as GPIOs or for a different controller.
26 *
27 * Although we expect each TC block to have a platform_device node, those
28 * nodes are not what drivers bind to. Instead, they ask for a specific
29 * TC block, by number ... which is a common approach on systems with many
30 * timers. Then they use clk_get() and platform_get_irq() to get clock and
31 * IRQ resources.
32 */
33
34 struct clk;
35
36 /**
37 * struct atmel_tcb_config - SoC data for a Timer/Counter Block
38 * @counter_width: size in bits of a timer counter register
39 */
40 struct atmel_tcb_config {
41 size_t counter_width;
42 };
43
44 /**
45 * struct atmel_tc - information about a Timer/Counter Block
46 * @pdev: physical device
47 * @regs: mapping through which the I/O registers can be accessed
48 * @id: block id
49 * @tcb_config: configuration data from SoC
50 * @irq: irq for each of the three channels
51 * @clk: internal clock source for each of the three channels
52 * @node: list node, for tclib internal use
53 * @allocated: if already used, for tclib internal use
54 *
55 * On some platforms, each TC channel has its own clocks and IRQs,
56 * while on others, all TC channels share the same clock and IRQ.
57 * Drivers should clk_enable() all the clocks they need even though
58 * all the entries in @clk may point to the same physical clock.
59 * Likewise, drivers should request irqs independently for each
60 * channel, but they must use IRQF_SHARED in case some of the entries
61 * in @irq are actually the same IRQ.
62 */
63 struct atmel_tc {
64 struct platform_device *pdev;
65 void __iomem *regs;
66 int id;
67 const struct atmel_tcb_config *tcb_config;
68 int irq[3];
69 struct clk *clk[3];
70 struct list_head node;
71 bool allocated;
72 };
73
74 extern struct atmel_tc *atmel_tc_alloc(unsigned block);
75 extern void atmel_tc_free(struct atmel_tc *tc);
76
77 /* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
78 extern const u8 atmel_tc_divisors[5];
79
80
81 /*
82 * Two registers have block-wide controls. These are: configuring the three
83 * "external" clocks (or event sources) used by the timer channels; and
84 * synchronizing the timers by resetting them all at once.
85 *
86 * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
87 * signals. Or, it can mean "external to timer", using the TIOA output from
88 * one of the other two timers that's being run in waveform mode.
89 */
90
91 #define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */
92 #define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */
93
94 #define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */
95 #define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */
96 #define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0)
97 #define ATMEL_TC_TC0XC0S_NONE (1 << 0)
98 #define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0)
99 #define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0)
100 #define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */
101 #define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2)
102 #define ATMEL_TC_TC1XC1S_NONE (1 << 2)
103 #define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2)
104 #define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2)
105 #define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */
106 #define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4)
107 #define ATMEL_TC_TC2XC2S_NONE (1 << 4)
108 #define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4)
109 #define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4)
110
111
112 /*
113 * Each TC block has three "channels", each with one counter and controls.
114 *
115 * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
116 * when it's not "external") is silicon-specific. AT91 platforms use one
117 * set of definitions; AVR32 platforms use a different set. Don't hard-wire
118 * such knowledge into your code, use the global "atmel_tc_divisors" ...
119 * where index N is the divisor for clock N+1, else zero to indicate it uses
120 * the 32 KiHz clock.
121 *
122 * The timers can be chained in various ways, and operated in "waveform"
123 * generation mode (including PWM) or "capture" mode (to time events). In
124 * both modes, behavior can be configured in many ways.
125 *
126 * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a
127 * PWM output, and TIOB as either another PWM or as a trigger. Capture mode
128 * uses them only as inputs.
129 */
130 #define ATMEL_TC_CHAN(idx) ((idx)*0x40)
131 #define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
132
133 #define ATMEL_TC_CCR 0x00 /* Channel Control Register */
134 #define ATMEL_TC_CLKEN (1 << 0) /* clock enable */
135 #define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */
136 #define ATMEL_TC_SWTRG (1 << 2) /* software trigger */
137
138 #define ATMEL_TC_CMR 0x04 /* Channel Mode Register */
139
140 /* Both modes share some CMR bits */
141 #define ATMEL_TC_TCCLKS (7 << 0) /* clock source */
142 #define ATMEL_TC_TIMER_CLOCK1 (0 << 0)
143 #define ATMEL_TC_TIMER_CLOCK2 (1 << 0)
144 #define ATMEL_TC_TIMER_CLOCK3 (2 << 0)
145 #define ATMEL_TC_TIMER_CLOCK4 (3 << 0)
146 #define ATMEL_TC_TIMER_CLOCK5 (4 << 0)
147 #define ATMEL_TC_XC0 (5 << 0)
148 #define ATMEL_TC_XC1 (6 << 0)
149 #define ATMEL_TC_XC2 (7 << 0)
150 #define ATMEL_TC_CLKI (1 << 3) /* clock invert */
151 #define ATMEL_TC_BURST (3 << 4) /* clock gating */
152 #define ATMEL_TC_GATE_NONE (0 << 4)
153 #define ATMEL_TC_GATE_XC0 (1 << 4)
154 #define ATMEL_TC_GATE_XC1 (2 << 4)
155 #define ATMEL_TC_GATE_XC2 (3 << 4)
156 #define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */
157
158 /* CAPTURE mode CMR bits */
159 #define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */
160 #define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */
161 #define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */
162 #define ATMEL_TC_ETRGEDG_NONE (0 << 8)
163 #define ATMEL_TC_ETRGEDG_RISING (1 << 8)
164 #define ATMEL_TC_ETRGEDG_FALLING (2 << 8)
165 #define ATMEL_TC_ETRGEDG_BOTH (3 << 8)
166 #define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */
167 #define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */
168 #define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */
169 #define ATMEL_TC_LDRA_NONE (0 << 16)
170 #define ATMEL_TC_LDRA_RISING (1 << 16)
171 #define ATMEL_TC_LDRA_FALLING (2 << 16)
172 #define ATMEL_TC_LDRA_BOTH (3 << 16)
173 #define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */
174 #define ATMEL_TC_LDRB_NONE (0 << 18)
175 #define ATMEL_TC_LDRB_RISING (1 << 18)
176 #define ATMEL_TC_LDRB_FALLING (2 << 18)
177 #define ATMEL_TC_LDRB_BOTH (3 << 18)
178
179 /* WAVEFORM mode CMR bits */
180 #define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */
181 #define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */
182 #define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */
183 #define ATMEL_TC_EEVTEDG_NONE (0 << 8)
184 #define ATMEL_TC_EEVTEDG_RISING (1 << 8)
185 #define ATMEL_TC_EEVTEDG_FALLING (2 << 8)
186 #define ATMEL_TC_EEVTEDG_BOTH (3 << 8)
187 #define ATMEL_TC_EEVT (3 << 10) /* external event source */
188 #define ATMEL_TC_EEVT_TIOB (0 << 10)
189 #define ATMEL_TC_EEVT_XC0 (1 << 10)
190 #define ATMEL_TC_EEVT_XC1 (2 << 10)
191 #define ATMEL_TC_EEVT_XC2 (3 << 10)
192 #define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */
193 #define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */
194 #define ATMEL_TC_WAVESEL_UP (0 << 13)
195 #define ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
196 #define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13)
197 #define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
198 #define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */
199 #define ATMEL_TC_ACPA_NONE (0 << 16)
200 #define ATMEL_TC_ACPA_SET (1 << 16)
201 #define ATMEL_TC_ACPA_CLEAR (2 << 16)
202 #define ATMEL_TC_ACPA_TOGGLE (3 << 16)
203 #define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */
204 #define ATMEL_TC_ACPC_NONE (0 << 18)
205 #define ATMEL_TC_ACPC_SET (1 << 18)
206 #define ATMEL_TC_ACPC_CLEAR (2 << 18)
207 #define ATMEL_TC_ACPC_TOGGLE (3 << 18)
208 #define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */
209 #define ATMEL_TC_AEEVT_NONE (0 << 20)
210 #define ATMEL_TC_AEEVT_SET (1 << 20)
211 #define ATMEL_TC_AEEVT_CLEAR (2 << 20)
212 #define ATMEL_TC_AEEVT_TOGGLE (3 << 20)
213 #define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */
214 #define ATMEL_TC_ASWTRG_NONE (0 << 22)
215 #define ATMEL_TC_ASWTRG_SET (1 << 22)
216 #define ATMEL_TC_ASWTRG_CLEAR (2 << 22)
217 #define ATMEL_TC_ASWTRG_TOGGLE (3 << 22)
218 #define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */
219 #define ATMEL_TC_BCPB_NONE (0 << 24)
220 #define ATMEL_TC_BCPB_SET (1 << 24)
221 #define ATMEL_TC_BCPB_CLEAR (2 << 24)
222 #define ATMEL_TC_BCPB_TOGGLE (3 << 24)
223 #define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */
224 #define ATMEL_TC_BCPC_NONE (0 << 26)
225 #define ATMEL_TC_BCPC_SET (1 << 26)
226 #define ATMEL_TC_BCPC_CLEAR (2 << 26)
227 #define ATMEL_TC_BCPC_TOGGLE (3 << 26)
228 #define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */
229 #define ATMEL_TC_BEEVT_NONE (0 << 28)
230 #define ATMEL_TC_BEEVT_SET (1 << 28)
231 #define ATMEL_TC_BEEVT_CLEAR (2 << 28)
232 #define ATMEL_TC_BEEVT_TOGGLE (3 << 28)
233 #define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */
234 #define ATMEL_TC_BSWTRG_NONE (0 << 30)
235 #define ATMEL_TC_BSWTRG_SET (1 << 30)
236 #define ATMEL_TC_BSWTRG_CLEAR (2 << 30)
237 #define ATMEL_TC_BSWTRG_TOGGLE (3 << 30)
238
239 #define ATMEL_TC_CV 0x10 /* counter Value */
240 #define ATMEL_TC_RA 0x14 /* register A */
241 #define ATMEL_TC_RB 0x18 /* register B */
242 #define ATMEL_TC_RC 0x1c /* register C */
243
244 #define ATMEL_TC_SR 0x20 /* status (read-only) */
245 /* Status-only flags */
246 #define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */
247 #define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */
248 #define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */
249
250 #define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */
251 #define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */
252 #define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */
253
254 /* Status and IRQ flags */
255 #define ATMEL_TC_COVFS (1 << 0) /* counter overflow */
256 #define ATMEL_TC_LOVRS (1 << 1) /* load overrun */
257 #define ATMEL_TC_CPAS (1 << 2) /* RA compare */
258 #define ATMEL_TC_CPBS (1 << 3) /* RB compare */
259 #define ATMEL_TC_CPCS (1 << 4) /* RC compare */
260 #define ATMEL_TC_LDRAS (1 << 5) /* RA loading */
261 #define ATMEL_TC_LDRBS (1 << 6) /* RB loading */
262 #define ATMEL_TC_ETRGS (1 << 7) /* external trigger */
263 #define ATMEL_TC_ALL_IRQ (ATMEL_TC_COVFS | ATMEL_TC_LOVRS | \
264 ATMEL_TC_CPAS | ATMEL_TC_CPBS | \
265 ATMEL_TC_CPCS | ATMEL_TC_LDRAS | \
266 ATMEL_TC_LDRBS | ATMEL_TC_ETRGS) \
267 /* all IRQs */
268
269 #endif