1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Block data types and constants. Directly include this file only to
4 * break include dependency loop.
6 #ifndef __LINUX_BLK_TYPES_H
7 #define __LINUX_BLK_TYPES_H
9 #include <linux/types.h>
10 #include <linux/bvec.h>
11 #include <linux/device.h>
12 #include <linux/ktime.h>
16 struct bio_integrity_payload
;
19 struct cgroup_subsys_state
;
20 typedef void (bio_end_io_t
) (struct bio
*);
24 sector_t bd_start_sect
;
25 struct disk_stats __percpu
*bd_stats
;
26 unsigned long bd_stamp
;
27 bool bd_read_only
; /* read-only policy */
30 struct inode
* bd_inode
; /* will die */
31 struct super_block
* bd_super
;
32 struct mutex bd_mutex
; /* open/close mutex */
34 struct device bd_device
;
39 struct list_head bd_holder_disks
;
41 struct kobject
*bd_holder_dir
;
43 /* number of times partitions within this device have been opened. */
44 unsigned bd_part_count
;
46 spinlock_t bd_size_lock
; /* for bd_inode->i_size updates */
47 struct gendisk
* bd_disk
;
48 struct backing_dev_info
*bd_bdi
;
50 /* The counter of freeze processes */
51 int bd_fsfreeze_count
;
52 /* Mutex for freeze */
53 struct mutex bd_fsfreeze_mutex
;
54 struct super_block
*bd_fsfreeze_sb
;
56 struct partition_meta_info
*bd_meta_info
;
57 #ifdef CONFIG_FAIL_MAKE_REQUEST
62 #define bdev_whole(_bdev) \
63 ((_bdev)->bd_disk->part0)
65 #define dev_to_bdev(device) \
66 container_of((device), struct block_device, bd_device)
68 #define bdev_kobj(_bdev) \
69 (&((_bdev)->bd_device.kobj))
72 * Block error status values. See block/blk-core:blk_errors for the details.
73 * Alpha cannot write a byte atomically, so we need to use 32-bit value.
75 #if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__)
76 typedef u32 __bitwise blk_status_t
;
78 typedef u8 __bitwise blk_status_t
;
81 #define BLK_STS_NOTSUPP ((__force blk_status_t)1)
82 #define BLK_STS_TIMEOUT ((__force blk_status_t)2)
83 #define BLK_STS_NOSPC ((__force blk_status_t)3)
84 #define BLK_STS_TRANSPORT ((__force blk_status_t)4)
85 #define BLK_STS_TARGET ((__force blk_status_t)5)
86 #define BLK_STS_NEXUS ((__force blk_status_t)6)
87 #define BLK_STS_MEDIUM ((__force blk_status_t)7)
88 #define BLK_STS_PROTECTION ((__force blk_status_t)8)
89 #define BLK_STS_RESOURCE ((__force blk_status_t)9)
90 #define BLK_STS_IOERR ((__force blk_status_t)10)
92 /* hack for device mapper, don't use elsewhere: */
93 #define BLK_STS_DM_REQUEUE ((__force blk_status_t)11)
95 #define BLK_STS_AGAIN ((__force blk_status_t)12)
98 * BLK_STS_DEV_RESOURCE is returned from the driver to the block layer if
99 * device related resources are unavailable, but the driver can guarantee
100 * that the queue will be rerun in the future once resources become
101 * available again. This is typically the case for device specific
102 * resources that are consumed for IO. If the driver fails allocating these
103 * resources, we know that inflight (or pending) IO will free these
104 * resource upon completion.
106 * This is different from BLK_STS_RESOURCE in that it explicitly references
107 * a device specific resource. For resources of wider scope, allocation
108 * failure can happen without having pending IO. This means that we can't
109 * rely on request completions freeing these resources, as IO may not be in
110 * flight. Examples of that are kernel memory allocations, DMA mappings, or
111 * any other system wide resources.
113 #define BLK_STS_DEV_RESOURCE ((__force blk_status_t)13)
116 * BLK_STS_ZONE_RESOURCE is returned from the driver to the block layer if zone
117 * related resources are unavailable, but the driver can guarantee the queue
118 * will be rerun in the future once the resources become available again.
120 * This is different from BLK_STS_DEV_RESOURCE in that it explicitly references
121 * a zone specific resource and IO to a different zone on the same device could
122 * still be served. Examples of that are zones that are write-locked, but a read
123 * to the same zone could be served.
125 #define BLK_STS_ZONE_RESOURCE ((__force blk_status_t)14)
128 * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
129 * path if the device returns a status indicating that too many zone resources
130 * are currently open. The same command should be successful if resubmitted
131 * after the number of open zones decreases below the device's limits, which is
132 * reported in the request_queue's max_open_zones.
134 #define BLK_STS_ZONE_OPEN_RESOURCE ((__force blk_status_t)15)
137 * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
138 * path if the device returns a status indicating that too many zone resources
139 * are currently active. The same command should be successful if resubmitted
140 * after the number of active zones decreases below the device's limits, which
141 * is reported in the request_queue's max_active_zones.
143 #define BLK_STS_ZONE_ACTIVE_RESOURCE ((__force blk_status_t)16)
146 * blk_path_error - returns true if error may be path related
147 * @error: status the request was completed with
150 * This classifies block error status into non-retryable errors and ones
151 * that may be successful if retried on a failover path.
154 * %false - retrying failover path will not help
155 * %true - may succeed if retried
157 static inline bool blk_path_error(blk_status_t error
)
160 case BLK_STS_NOTSUPP
:
165 case BLK_STS_PROTECTION
:
169 /* Anything else could be a path failure, so should be retried */
174 * From most significant bit:
175 * 1 bit: reserved for other usage, see below
176 * 12 bits: original size of bio
177 * 51 bits: issue time of bio
179 #define BIO_ISSUE_RES_BITS 1
180 #define BIO_ISSUE_SIZE_BITS 12
181 #define BIO_ISSUE_RES_SHIFT (64 - BIO_ISSUE_RES_BITS)
182 #define BIO_ISSUE_SIZE_SHIFT (BIO_ISSUE_RES_SHIFT - BIO_ISSUE_SIZE_BITS)
183 #define BIO_ISSUE_TIME_MASK ((1ULL << BIO_ISSUE_SIZE_SHIFT) - 1)
184 #define BIO_ISSUE_SIZE_MASK \
185 (((1ULL << BIO_ISSUE_SIZE_BITS) - 1) << BIO_ISSUE_SIZE_SHIFT)
186 #define BIO_ISSUE_RES_MASK (~((1ULL << BIO_ISSUE_RES_SHIFT) - 1))
188 /* Reserved bit for blk-throtl */
189 #define BIO_ISSUE_THROTL_SKIP_LATENCY (1ULL << 63)
195 static inline u64
__bio_issue_time(u64 time
)
197 return time
& BIO_ISSUE_TIME_MASK
;
200 static inline u64
bio_issue_time(struct bio_issue
*issue
)
202 return __bio_issue_time(issue
->value
);
205 static inline sector_t
bio_issue_size(struct bio_issue
*issue
)
207 return ((issue
->value
& BIO_ISSUE_SIZE_MASK
) >> BIO_ISSUE_SIZE_SHIFT
);
210 static inline void bio_issue_init(struct bio_issue
*issue
,
213 size
&= (1ULL << BIO_ISSUE_SIZE_BITS
) - 1;
214 issue
->value
= ((issue
->value
& BIO_ISSUE_RES_MASK
) |
215 (ktime_get_ns() & BIO_ISSUE_TIME_MASK
) |
216 ((u64
)size
<< BIO_ISSUE_SIZE_SHIFT
));
220 * main unit of I/O for the block layer and lower layers (ie drivers and
224 struct bio
*bi_next
; /* request queue link */
225 struct block_device
*bi_bdev
;
226 unsigned int bi_opf
; /* bottom bits req flags,
227 * top bits REQ_OP. Use
230 unsigned short bi_flags
; /* BIO_* below */
231 unsigned short bi_ioprio
;
232 unsigned short bi_write_hint
;
233 blk_status_t bi_status
;
234 atomic_t __bi_remaining
;
236 struct bvec_iter bi_iter
;
238 bio_end_io_t
*bi_end_io
;
241 #ifdef CONFIG_BLK_CGROUP
243 * Represents the association of the css and request_queue for the bio.
244 * If a bio goes direct to device, it will not have a blkg as it will
245 * not have a request_queue associated with it. The reference is put
246 * on release of the bio.
248 struct blkcg_gq
*bi_blkg
;
249 struct bio_issue bi_issue
;
250 #ifdef CONFIG_BLK_CGROUP_IOCOST
255 #ifdef CONFIG_BLK_INLINE_ENCRYPTION
256 struct bio_crypt_ctx
*bi_crypt_context
;
260 #if defined(CONFIG_BLK_DEV_INTEGRITY)
261 struct bio_integrity_payload
*bi_integrity
; /* data integrity */
265 unsigned short bi_vcnt
; /* how many bio_vec's */
268 * Everything starting with bi_max_vecs will be preserved by bio_reset()
271 unsigned short bi_max_vecs
; /* max bvl_vecs we can hold */
273 atomic_t __bi_cnt
; /* pin count */
275 struct bio_vec
*bi_io_vec
; /* the actual vec list */
277 struct bio_set
*bi_pool
;
280 * We can inline a number of vecs at the end of the bio, to avoid
281 * double allocations for a small number of bio_vecs. This member
282 * MUST obviously be kept at the very end of the bio.
284 struct bio_vec bi_inline_vecs
[];
287 #define BIO_RESET_BYTES offsetof(struct bio, bi_max_vecs)
293 BIO_NO_PAGE_REF
, /* don't put release vec pages */
294 BIO_CLONED
, /* doesn't own data */
295 BIO_BOUNCED
, /* bio is a bounce bio */
296 BIO_WORKINGSET
, /* contains userspace workingset pages */
297 BIO_QUIET
, /* Make BIO Quiet */
298 BIO_CHAIN
, /* chained bio, ->bi_remaining in effect */
299 BIO_REFFED
, /* bio has elevated ->bi_cnt */
300 BIO_THROTTLED
, /* This bio has already been subjected to
301 * throttling rules. Don't do it again. */
302 BIO_TRACE_COMPLETION
, /* bio_endio() should trace the final completion
304 BIO_CGROUP_ACCT
, /* has been accounted to a cgroup */
305 BIO_TRACKED
, /* set if bio goes through the rq_qos path */
310 typedef __u32 __bitwise blk_mq_req_flags_t
;
313 * Operations and flags common to the bio and request structures.
314 * We use 8 bits for encoding the operation, and the remaining 24 for flags.
316 * The least significant bit of the operation number indicates the data
317 * transfer direction:
319 * - if the least significant bit is set transfers are TO the device
320 * - if the least significant bit is not set transfers are FROM the device
322 * If a operation does not transfer data the least significant bit has no
325 #define REQ_OP_BITS 8
326 #define REQ_OP_MASK ((1 << REQ_OP_BITS) - 1)
327 #define REQ_FLAG_BITS 24
330 /* read sectors from the device */
332 /* write sectors to the device */
334 /* flush the volatile write cache */
336 /* discard sectors */
338 /* securely erase sectors */
339 REQ_OP_SECURE_ERASE
= 5,
340 /* write the same sector many times */
341 REQ_OP_WRITE_SAME
= 7,
342 /* write the zero filled sector many times */
343 REQ_OP_WRITE_ZEROES
= 9,
345 REQ_OP_ZONE_OPEN
= 10,
347 REQ_OP_ZONE_CLOSE
= 11,
348 /* Transition a zone to full */
349 REQ_OP_ZONE_FINISH
= 12,
350 /* write data at the current zone write pointer */
351 REQ_OP_ZONE_APPEND
= 13,
352 /* reset a zone write pointer */
353 REQ_OP_ZONE_RESET
= 15,
354 /* reset all the zone present on the device */
355 REQ_OP_ZONE_RESET_ALL
= 17,
357 /* SCSI passthrough using struct scsi_request */
359 REQ_OP_SCSI_OUT
= 33,
360 /* Driver private requests */
368 __REQ_FAILFAST_DEV
= /* no driver retries of device errors */
370 __REQ_FAILFAST_TRANSPORT
, /* no driver retries of transport errors */
371 __REQ_FAILFAST_DRIVER
, /* no driver retries of driver errors */
372 __REQ_SYNC
, /* request is sync (sync write or read) */
373 __REQ_META
, /* metadata io request */
374 __REQ_PRIO
, /* boost priority in cfq */
375 __REQ_NOMERGE
, /* don't touch this for merging */
376 __REQ_IDLE
, /* anticipate more IO after this one */
377 __REQ_INTEGRITY
, /* I/O includes block integrity payload */
378 __REQ_FUA
, /* forced unit access */
379 __REQ_PREFLUSH
, /* request for cache flush */
380 __REQ_RAHEAD
, /* read ahead, can fail anytime */
381 __REQ_BACKGROUND
, /* background IO */
382 __REQ_NOWAIT
, /* Don't wait if request will block */
384 * When a shared kthread needs to issue a bio for a cgroup, doing
385 * so synchronously can lead to priority inversions as the kthread
386 * can be trapped waiting for that cgroup. CGROUP_PUNT flag makes
387 * submit_bio() punt the actual issuing to a dedicated per-blkcg
388 * work item to avoid such priority inversions.
392 /* command specific flags for REQ_OP_WRITE_ZEROES: */
393 __REQ_NOUNMAP
, /* do not free blocks when zeroing */
399 __REQ_SWAP
, /* swapping request. */
400 __REQ_NR_BITS
, /* stops here */
403 #define REQ_FAILFAST_DEV (1ULL << __REQ_FAILFAST_DEV)
404 #define REQ_FAILFAST_TRANSPORT (1ULL << __REQ_FAILFAST_TRANSPORT)
405 #define REQ_FAILFAST_DRIVER (1ULL << __REQ_FAILFAST_DRIVER)
406 #define REQ_SYNC (1ULL << __REQ_SYNC)
407 #define REQ_META (1ULL << __REQ_META)
408 #define REQ_PRIO (1ULL << __REQ_PRIO)
409 #define REQ_NOMERGE (1ULL << __REQ_NOMERGE)
410 #define REQ_IDLE (1ULL << __REQ_IDLE)
411 #define REQ_INTEGRITY (1ULL << __REQ_INTEGRITY)
412 #define REQ_FUA (1ULL << __REQ_FUA)
413 #define REQ_PREFLUSH (1ULL << __REQ_PREFLUSH)
414 #define REQ_RAHEAD (1ULL << __REQ_RAHEAD)
415 #define REQ_BACKGROUND (1ULL << __REQ_BACKGROUND)
416 #define REQ_NOWAIT (1ULL << __REQ_NOWAIT)
417 #define REQ_CGROUP_PUNT (1ULL << __REQ_CGROUP_PUNT)
419 #define REQ_NOUNMAP (1ULL << __REQ_NOUNMAP)
420 #define REQ_HIPRI (1ULL << __REQ_HIPRI)
422 #define REQ_DRV (1ULL << __REQ_DRV)
423 #define REQ_SWAP (1ULL << __REQ_SWAP)
425 #define REQ_FAILFAST_MASK \
426 (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
428 #define REQ_NOMERGE_FLAGS \
429 (REQ_NOMERGE | REQ_PREFLUSH | REQ_FUA)
440 #define bio_op(bio) \
441 ((bio)->bi_opf & REQ_OP_MASK)
442 #define req_op(req) \
443 ((req)->cmd_flags & REQ_OP_MASK)
445 /* obsolete, don't use in new code */
446 static inline void bio_set_op_attrs(struct bio
*bio
, unsigned op
,
449 bio
->bi_opf
= op
| op_flags
;
452 static inline bool op_is_write(unsigned int op
)
458 * Check if the bio or request is one that needs special treatment in the
459 * flush state machine.
461 static inline bool op_is_flush(unsigned int op
)
463 return op
& (REQ_FUA
| REQ_PREFLUSH
);
467 * Reads are always treated as synchronous, as are requests with the FUA or
468 * PREFLUSH flag. Other operations may be marked as synchronous using the
471 static inline bool op_is_sync(unsigned int op
)
473 return (op
& REQ_OP_MASK
) == REQ_OP_READ
||
474 (op
& (REQ_SYNC
| REQ_FUA
| REQ_PREFLUSH
));
477 static inline bool op_is_discard(unsigned int op
)
479 return (op
& REQ_OP_MASK
) == REQ_OP_DISCARD
;
483 * Check if a bio or request operation is a zone management operation, with
484 * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
485 * due to its different handling in the block layer and device response in
486 * case of command failure.
488 static inline bool op_is_zone_mgmt(enum req_opf op
)
490 switch (op
& REQ_OP_MASK
) {
491 case REQ_OP_ZONE_RESET
:
492 case REQ_OP_ZONE_OPEN
:
493 case REQ_OP_ZONE_CLOSE
:
494 case REQ_OP_ZONE_FINISH
:
501 static inline int op_stat_group(unsigned int op
)
503 if (op_is_discard(op
))
505 return op_is_write(op
);
508 typedef unsigned int blk_qc_t
;
509 #define BLK_QC_T_NONE -1U
510 #define BLK_QC_T_SHIFT 16
511 #define BLK_QC_T_INTERNAL (1U << 31)
513 static inline bool blk_qc_t_valid(blk_qc_t cookie
)
515 return cookie
!= BLK_QC_T_NONE
;
518 static inline unsigned int blk_qc_t_to_queue_num(blk_qc_t cookie
)
520 return (cookie
& ~BLK_QC_T_INTERNAL
) >> BLK_QC_T_SHIFT
;
523 static inline unsigned int blk_qc_t_to_tag(blk_qc_t cookie
)
525 return cookie
& ((1u << BLK_QC_T_SHIFT
) - 1);
528 static inline bool blk_qc_t_is_internal(blk_qc_t cookie
)
530 return (cookie
& BLK_QC_T_INTERNAL
) != 0;
541 #endif /* __LINUX_BLK_TYPES_H */