]>
git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - include/linux/clocksource.h
1 /* linux/include/linux/clocksource.h
3 * This file contains the structure definitions for clocksources.
5 * If you are not a clocksource, or timekeeping code, you should
6 * not be including this file!
8 #ifndef _LINUX_CLOCKSOURCE_H
9 #define _LINUX_CLOCKSOURCE_H
11 #include <linux/types.h>
12 #include <linux/timex.h>
13 #include <linux/time.h>
14 #include <linux/list.h>
15 #include <asm/div64.h>
18 /* clocksource cycle base type */
22 * struct clocksource - hardware abstraction for a free running counter
23 * Provides mostly state-free accessors to the underlying hardware.
25 * @name: ptr to clocksource name
26 * @list: list head for registration
27 * @rating: rating value for selection (higher is better)
28 * To avoid rating inflation the following
29 * list should give you a guide as to how
30 * to assign your clocksource a rating
31 * 1-99: Unfit for real use
32 * Only available for bootup and testing purposes.
33 * 100-199: Base level usability.
34 * Functional for real use, but not desired.
36 * A correct and usable clocksource.
38 * A reasonably fast and accurate clocksource.
40 * The ideal clocksource. A must-use where
42 * @read: returns a cycle value
43 * @mask: bitmask for two's complement
44 * subtraction of non 64 bit counters
45 * @mult: cycle to nanosecond multiplier
46 * @shift: cycle to nanosecond divisor (power of two)
47 * @update_callback: called when safe to alter clocksource values
48 * @is_continuous: defines if clocksource is free-running.
49 * @interval_cycles: Used internally by timekeeping core, please ignore.
50 * @interval_snsecs: Used internally by timekeeping core, please ignore.
54 struct list_head list
;
56 cycle_t (*read
)(void);
60 int (*update_callback
)(void);
63 /* timekeeping specific data, ignore */
64 cycle_t interval_cycles
;
70 * clocksource_khz2mult - calculates mult from khz and shift
71 * @khz: Clocksource frequency in KHz
72 * @shift_constant: Clocksource shift factor
74 * Helper functions that converts a khz counter frequency to a timsource
75 * multiplier, given the clocksource shift value
77 static inline u32
clocksource_khz2mult(u32 khz
, u32 shift_constant
)
79 /* khz = cyc/(Million ns)
80 * mult/2^shift = ns/cyc
81 * mult = ns/cyc * 2^shift
82 * mult = 1Million/khz * 2^shift
83 * mult = 1000000 * 2^shift / khz
84 * mult = (1000000<<shift) / khz
86 u64 tmp
= ((u64
)1000000) << shift_constant
;
88 tmp
+= khz
/2; /* round for do_div */
95 * clocksource_hz2mult - calculates mult from hz and shift
96 * @hz: Clocksource frequency in Hz
97 * @shift_constant: Clocksource shift factor
99 * Helper functions that converts a hz counter
100 * frequency to a timsource multiplier, given the
101 * clocksource shift value
103 static inline u32
clocksource_hz2mult(u32 hz
, u32 shift_constant
)
105 /* hz = cyc/(Billion ns)
106 * mult/2^shift = ns/cyc
107 * mult = ns/cyc * 2^shift
108 * mult = 1Billion/hz * 2^shift
109 * mult = 1000000000 * 2^shift / hz
110 * mult = (1000000000<<shift) / hz
112 u64 tmp
= ((u64
)1000000000) << shift_constant
;
114 tmp
+= hz
/2; /* round for do_div */
121 * read_clocksource: - Access the clocksource's current cycle value
122 * @cs: pointer to clocksource being read
124 * Uses the clocksource to return the current cycle_t value
126 static inline cycle_t
read_clocksource(struct clocksource
*cs
)
132 * cyc2ns - converts clocksource cycles to nanoseconds
133 * @cs: Pointer to clocksource
136 * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
138 * XXX - This could use some mult_lxl_ll() asm optimization
140 static inline s64
cyc2ns(struct clocksource
*cs
, cycle_t cycles
)
142 u64 ret
= (u64
)cycles
;
143 ret
= (ret
* cs
->mult
) >> cs
->shift
;
148 * calculate_clocksource_interval - Calculates a clocksource interval struct
150 * @c: Pointer to clocksource.
151 * @length_nsec: Desired interval length in nanoseconds.
153 * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
154 * pair and interval request.
156 * Unless you're the timekeeping code, you should not be using this!
158 static inline void calculate_clocksource_interval(struct clocksource
*c
,
159 unsigned long length_nsec
)
163 /* XXX - All of this could use a whole lot of optimization */
167 do_div(tmp
, c
->mult
);
169 c
->interval_cycles
= (cycle_t
)tmp
;
170 if(c
->interval_cycles
== 0)
171 c
->interval_cycles
= 1;
173 c
->interval_snsecs
= (u64
)c
->interval_cycles
* c
->mult
;
176 /* used to install a new clocksource */
177 int register_clocksource(struct clocksource
*);
178 void reselect_clocksource(void);
179 struct clocksource
* get_next_clocksource(void);
181 #endif /* _LINUX_CLOCKSOURCE_H */