Input: wm97xx: add new AC97 bus support

[mirror_ubuntu-focal-kernel.git] / include / linux / device.h

/*
 * device.h - generic, centralized driver model
 *
 * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
 * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
 * Copyright (c) 2008-2009 Novell Inc.
 *
 * This file is released under the GPLv2
 *
 * See Documentation/driver-model/ for more information.
 */

#ifndef _DEVICE_H_
#define _DEVICE_H_

#include <linux/ioport.h>
#include <linux/kobject.h>
#include <linux/klist.h>
#include <linux/list.h>
#include <linux/lockdep.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pinctrl/devinfo.h>
#include <linux/pm.h>
#include <linux/atomic.h>
#include <linux/ratelimit.h>
#include <linux/uidgid.h>
#include <linux/gfp.h>
#include <asm/device.h>

struct device;
struct device_private;
struct device_driver;
struct driver_private;
struct module;
struct class;
struct subsys_private;
struct bus_type;
struct device_node;
struct fwnode_handle;
struct iommu_ops;
struct iommu_group;
struct iommu_fwspec;

struct bus_attribute {
        struct attribute        attr;
        ssize_t (*show)(struct bus_type *bus, char *buf);
        ssize_t (*store)(struct bus_type *bus, const char *buf, size_t count);
};

#define BUS_ATTR(_name, _mode, _show, _store)   \
        struct bus_attribute bus_attr_##_name = __ATTR(_name, _mode, _show, _store)
#define BUS_ATTR_RW(_name) \
        struct bus_attribute bus_attr_##_name = __ATTR_RW(_name)
#define BUS_ATTR_RO(_name) \
        struct bus_attribute bus_attr_##_name = __ATTR_RO(_name)

extern int __must_check bus_create_file(struct bus_type *,
                                        struct bus_attribute *);
extern void bus_remove_file(struct bus_type *, struct bus_attribute *);

/**
 * struct bus_type - The bus type of the device
 *
 * @name:       The name of the bus.
 * @dev_name:   Used for subsystems to enumerate devices like ("foo%u", dev->id).
 * @dev_root:   Default device to use as the parent.
 * @bus_groups: Default attributes of the bus.
 * @dev_groups: Default attributes of the devices on the bus.
 * @drv_groups: Default attributes of the device drivers on the bus.
 * @match:      Called, perhaps multiple times, whenever a new device or driver
 *              is added for this bus. It should return a positive value if the
 *              given device can be handled by the given driver and zero
 *              otherwise. It may also return error code if determining that
 *              the driver supports the device is not possible. In case of
 *              -EPROBE_DEFER it will queue the device for deferred probing.
 * @uevent:     Called when a device is added, removed, or a few other things
 *              that generate uevents to add the environment variables.
 * @probe:      Called when a new device or driver add to this bus, and callback
 *              the specific driver's probe to initial the matched device.
 * @remove:     Called when a device removed from this bus.
 * @shutdown:   Called at shut-down time to quiesce the device.
 *
 * @online:     Called to put the device back online (after offlining it).
 * @offline:    Called to put the device offline for hot-removal. May fail.
 *
 * @suspend:    Called when a device on this bus wants to go to sleep mode.
 * @resume:     Called to bring a device on this bus out of sleep mode.
 * @num_vf:     Called to find out how many virtual functions a device on this
 *              bus supports.
 * @pm:         Power management operations of this bus, callback the specific
 *              device driver's pm-ops.
 * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
 *              driver implementations to a bus and allow the driver to do
 *              bus-specific setup
 * @p:          The private data of the driver core, only the driver core can
 *              touch this.
 * @lock_key:   Lock class key for use by the lock validator
 *
 * A bus is a channel between the processor and one or more devices. For the
 * purposes of the device model, all devices are connected via a bus, even if
 * it is an internal, virtual, "platform" bus. Buses can plug into each other.
 * A USB controller is usually a PCI device, for example. The device model
 * represents the actual connections between buses and the devices they control.
 * A bus is represented by the bus_type structure. It contains the name, the
 * default attributes, the bus' methods, PM operations, and the driver core's
 * private data.
 */
struct bus_type {
        const char              *name;
        const char              *dev_name;
        struct device           *dev_root;
        const struct attribute_group **bus_groups;
        const struct attribute_group **dev_groups;
        const struct attribute_group **drv_groups;

        int (*match)(struct device *dev, struct device_driver *drv);
        int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
        int (*probe)(struct device *dev);
        int (*remove)(struct device *dev);
        void (*shutdown)(struct device *dev);

        int (*online)(struct device *dev);
        int (*offline)(struct device *dev);

        int (*suspend)(struct device *dev, pm_message_t state);
        int (*resume)(struct device *dev);

        int (*num_vf)(struct device *dev);

        const struct dev_pm_ops *pm;

        const struct iommu_ops *iommu_ops;

        struct subsys_private *p;
        struct lock_class_key lock_key;
};

extern int __must_check bus_register(struct bus_type *bus);

extern void bus_unregister(struct bus_type *bus);

extern int __must_check bus_rescan_devices(struct bus_type *bus);

/* iterator helpers for buses */
struct subsys_dev_iter {
        struct klist_iter               ki;
        const struct device_type        *type;
};
void subsys_dev_iter_init(struct subsys_dev_iter *iter,
                         struct bus_type *subsys,
                         struct device *start,
                         const struct device_type *type);
struct device *subsys_dev_iter_next(struct subsys_dev_iter *iter);
void subsys_dev_iter_exit(struct subsys_dev_iter *iter);

int bus_for_each_dev(struct bus_type *bus, struct device *start, void *data,
                     int (*fn)(struct device *dev, void *data));
struct device *bus_find_device(struct bus_type *bus, struct device *start,
                               void *data,
                               int (*match)(struct device *dev, void *data));
struct device *bus_find_device_by_name(struct bus_type *bus,
                                       struct device *start,
                                       const char *name);
struct device *subsys_find_device_by_id(struct bus_type *bus, unsigned int id,
                                        struct device *hint);
int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
                     void *data, int (*fn)(struct device_driver *, void *));
void bus_sort_breadthfirst(struct bus_type *bus,
                           int (*compare)(const struct device *a,
                                          const struct device *b));
/*
 * Bus notifiers: Get notified of addition/removal of devices
 * and binding/unbinding of drivers to devices.
 * In the long run, it should be a replacement for the platform
 * notify hooks.
 */
struct notifier_block;

extern int bus_register_notifier(struct bus_type *bus,
                                 struct notifier_block *nb);
extern int bus_unregister_notifier(struct bus_type *bus,
                                   struct notifier_block *nb);

/* All 4 notifers below get called with the target struct device *
 * as an argument. Note that those functions are likely to be called
 * with the device lock held in the core, so be careful.
 */
#define BUS_NOTIFY_ADD_DEVICE           0x00000001 /* device added */
#define BUS_NOTIFY_DEL_DEVICE           0x00000002 /* device to be removed */
#define BUS_NOTIFY_REMOVED_DEVICE       0x00000003 /* device removed */
#define BUS_NOTIFY_BIND_DRIVER          0x00000004 /* driver about to be
                                                      bound */
#define BUS_NOTIFY_BOUND_DRIVER         0x00000005 /* driver bound to device */
#define BUS_NOTIFY_UNBIND_DRIVER        0x00000006 /* driver about to be
                                                      unbound */
#define BUS_NOTIFY_UNBOUND_DRIVER       0x00000007 /* driver is unbound
                                                      from the device */
#define BUS_NOTIFY_DRIVER_NOT_BOUND     0x00000008 /* driver fails to be bound */

extern struct kset *bus_get_kset(struct bus_type *bus);
extern struct klist *bus_get_device_klist(struct bus_type *bus);

/**
 * enum probe_type - device driver probe type to try
 *      Device drivers may opt in for special handling of their
 *      respective probe routines. This tells the core what to
 *      expect and prefer.
 *
 * @PROBE_DEFAULT_STRATEGY: Used by drivers that work equally well
 *      whether probed synchronously or asynchronously.
 * @PROBE_PREFER_ASYNCHRONOUS: Drivers for "slow" devices which
 *      probing order is not essential for booting the system may
 *      opt into executing their probes asynchronously.
 * @PROBE_FORCE_SYNCHRONOUS: Use this to annotate drivers that need
 *      their probe routines to run synchronously with driver and
 *      device registration (with the exception of -EPROBE_DEFER
 *      handling - re-probing always ends up being done asynchronously).
 *
 * Note that the end goal is to switch the kernel to use asynchronous
 * probing by default, so annotating drivers with
 * %PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us
 * to speed up boot process while we are validating the rest of the
 * drivers.
 */
enum probe_type {
        PROBE_DEFAULT_STRATEGY,
        PROBE_PREFER_ASYNCHRONOUS,
        PROBE_FORCE_SYNCHRONOUS,
};

/**
 * struct device_driver - The basic device driver structure
 * @name:       Name of the device driver.
 * @bus:        The bus which the device of this driver belongs to.
 * @owner:      The module owner.
 * @mod_name:   Used for built-in modules.
 * @suppress_bind_attrs: Disables bind/unbind via sysfs.
 * @probe_type: Type of the probe (synchronous or asynchronous) to use.
 * @of_match_table: The open firmware table.
 * @acpi_match_table: The ACPI match table.
 * @probe:      Called to query the existence of a specific device,
 *              whether this driver can work with it, and bind the driver
 *              to a specific device.
 * @remove:     Called when the device is removed from the system to
 *              unbind a device from this driver.
 * @shutdown:   Called at shut-down time to quiesce the device.
 * @suspend:    Called to put the device to sleep mode. Usually to a
 *              low power state.
 * @resume:     Called to bring a device from sleep mode.
 * @groups:     Default attributes that get created by the driver core
 *              automatically.
 * @pm:         Power management operations of the device which matched
 *              this driver.
 * @p:          Driver core's private data, no one other than the driver
 *              core can touch this.
 *
 * The device driver-model tracks all of the drivers known to the system.
 * The main reason for this tracking is to enable the driver core to match
 * up drivers with new devices. Once drivers are known objects within the
 * system, however, a number of other things become possible. Device drivers
 * can export information and configuration variables that are independent
 * of any specific device.
 */
struct device_driver {
        const char              *name;
        struct bus_type         *bus;

        struct module           *owner;
        const char              *mod_name;      /* used for built-in modules */

        bool suppress_bind_attrs;       /* disables bind/unbind via sysfs */
        enum probe_type probe_type;

        const struct of_device_id       *of_match_table;
        const struct acpi_device_id     *acpi_match_table;

        int (*probe) (struct device *dev);
        int (*remove) (struct device *dev);
        void (*shutdown) (struct device *dev);
        int (*suspend) (struct device *dev, pm_message_t state);
        int (*resume) (struct device *dev);
        const struct attribute_group **groups;

        const struct dev_pm_ops *pm;

        struct driver_private *p;
};


extern int __must_check driver_register(struct device_driver *drv);
extern void driver_unregister(struct device_driver *drv);

extern struct device_driver *driver_find(const char *name,
                                         struct bus_type *bus);
extern int driver_probe_done(void);
extern void wait_for_device_probe(void);


/* sysfs interface for exporting driver attributes */

struct driver_attribute {
        struct attribute attr;
        ssize_t (*show)(struct device_driver *driver, char *buf);
        ssize_t (*store)(struct device_driver *driver, const char *buf,
                         size_t count);
};

#define DRIVER_ATTR(_name, _mode, _show, _store) \
        struct driver_attribute driver_attr_##_name = __ATTR(_name, _mode, _show, _store)
#define DRIVER_ATTR_RW(_name) \
        struct driver_attribute driver_attr_##_name = __ATTR_RW(_name)
#define DRIVER_ATTR_RO(_name) \
        struct driver_attribute driver_attr_##_name = __ATTR_RO(_name)
#define DRIVER_ATTR_WO(_name) \
        struct driver_attribute driver_attr_##_name = __ATTR_WO(_name)

extern int __must_check driver_create_file(struct device_driver *driver,
                                        const struct driver_attribute *attr);
extern void driver_remove_file(struct device_driver *driver,
                               const struct driver_attribute *attr);

extern int __must_check driver_for_each_device(struct device_driver *drv,
                                               struct device *start,
                                               void *data,
                                               int (*fn)(struct device *dev,
                                                         void *));
struct device *driver_find_device(struct device_driver *drv,
                                  struct device *start, void *data,
                                  int (*match)(struct device *dev, void *data));

/**
 * struct subsys_interface - interfaces to device functions
 * @name:       name of the device function
 * @subsys:     subsytem of the devices to attach to
 * @node:       the list of functions registered at the subsystem
 * @add_dev:    device hookup to device function handler
 * @remove_dev: device hookup to device function handler
 *
 * Simple interfaces attached to a subsystem. Multiple interfaces can
 * attach to a subsystem and its devices. Unlike drivers, they do not
 * exclusively claim or control devices. Interfaces usually represent
 * a specific functionality of a subsystem/class of devices.
 */
struct subsys_interface {
        const char *name;
        struct bus_type *subsys;
        struct list_head node;
        int (*add_dev)(struct device *dev, struct subsys_interface *sif);
        void (*remove_dev)(struct device *dev, struct subsys_interface *sif);
};

int subsys_interface_register(struct subsys_interface *sif);
void subsys_interface_unregister(struct subsys_interface *sif);

int subsys_system_register(struct bus_type *subsys,
                           const struct attribute_group **groups);
int subsys_virtual_register(struct bus_type *subsys,
                            const struct attribute_group **groups);

/**
 * struct class - device classes
 * @name:       Name of the class.
 * @owner:      The module owner.
 * @class_groups: Default attributes of this class.
 * @dev_groups: Default attributes of the devices that belong to the class.
 * @dev_kobj:   The kobject that represents this class and links it into the hierarchy.
 * @dev_uevent: Called when a device is added, removed from this class, or a
 *              few other things that generate uevents to add the environment
 *              variables.
 * @devnode:    Callback to provide the devtmpfs.
 * @class_release: Called to release this class.
 * @dev_release: Called to release the device.
 * @suspend:    Used to put the device to sleep mode, usually to a low power
 *              state.
 * @resume:     Used to bring the device from the sleep mode.
 * @shutdown_pre: Called at shut-down time before driver shutdown.
 * @ns_type:    Callbacks so sysfs can detemine namespaces.
 * @namespace:  Namespace of the device belongs to this class.
 * @pm:         The default device power management operations of this class.
 * @p:          The private data of the driver core, no one other than the
 *              driver core can touch this.
 *
 * A class is a higher-level view of a device that abstracts out low-level
 * implementation details. Drivers may see a SCSI disk or an ATA disk, but,
 * at the class level, they are all simply disks. Classes allow user space
 * to work with devices based on what they do, rather than how they are
 * connected or how they work.
 */
struct class {
        const char              *name;
        struct module           *owner;

        const struct attribute_group    **class_groups;
        const struct attribute_group    **dev_groups;
        struct kobject                  *dev_kobj;

        int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
        char *(*devnode)(struct device *dev, umode_t *mode);

        void (*class_release)(struct class *class);
        void (*dev_release)(struct device *dev);

        int (*suspend)(struct device *dev, pm_message_t state);
        int (*resume)(struct device *dev);
        int (*shutdown_pre)(struct device *dev);

        const struct kobj_ns_type_operations *ns_type;
        const void *(*namespace)(struct device *dev);

        const struct dev_pm_ops *pm;

        struct subsys_private *p;
};

struct class_dev_iter {
        struct klist_iter               ki;
        const struct device_type        *type;
};

extern struct kobject *sysfs_dev_block_kobj;
extern struct kobject *sysfs_dev_char_kobj;
extern int __must_check __class_register(struct class *class,
                                         struct lock_class_key *key);
extern void class_unregister(struct class *class);

/* This is a #define to keep the compiler from merging different
 * instances of the __key variable */
#define class_register(class)                   \
({                                              \
        static struct lock_class_key __key;     \
        __class_register(class, &__key);        \
})

struct class_compat;
struct class_compat *class_compat_register(const char *name);
void class_compat_unregister(struct class_compat *cls);
int class_compat_create_link(struct class_compat *cls, struct device *dev,
                             struct device *device_link);
void class_compat_remove_link(struct class_compat *cls, struct device *dev,
                              struct device *device_link);

extern void class_dev_iter_init(struct class_dev_iter *iter,
                                struct class *class,
                                struct device *start,
                                const struct device_type *type);
extern struct device *class_dev_iter_next(struct class_dev_iter *iter);
extern void class_dev_iter_exit(struct class_dev_iter *iter);

extern int class_for_each_device(struct class *class, struct device *start,
                                 void *data,
                                 int (*fn)(struct device *dev, void *data));
extern struct device *class_find_device(struct class *class,
                                        struct device *start, const void *data,
                                        int (*match)(struct device *, const void *));

struct class_attribute {
        struct attribute attr;
        ssize_t (*show)(struct class *class, struct class_attribute *attr,
                        char *buf);
        ssize_t (*store)(struct class *class, struct class_attribute *attr,
                        const char *buf, size_t count);
};

#define CLASS_ATTR_RW(_name) \
        struct class_attribute class_attr_##_name = __ATTR_RW(_name)
#define CLASS_ATTR_RO(_name) \
        struct class_attribute class_attr_##_name = __ATTR_RO(_name)
#define CLASS_ATTR_WO(_name) \
        struct class_attribute class_attr_##_name = __ATTR_WO(_name)

extern int __must_check class_create_file_ns(struct class *class,
                                             const struct class_attribute *attr,
                                             const void *ns);
extern void class_remove_file_ns(struct class *class,
                                 const struct class_attribute *attr,
                                 const void *ns);

static inline int __must_check class_create_file(struct class *class,
                                        const struct class_attribute *attr)
{
        return class_create_file_ns(class, attr, NULL);
}

static inline void class_remove_file(struct class *class,
                                     const struct class_attribute *attr)
{
        return class_remove_file_ns(class, attr, NULL);
}

/* Simple class attribute that is just a static string */
struct class_attribute_string {
        struct class_attribute attr;
        char *str;
};

/* Currently read-only only */
#define _CLASS_ATTR_STRING(_name, _mode, _str) \
        { __ATTR(_name, _mode, show_class_attr_string, NULL), _str }
#define CLASS_ATTR_STRING(_name, _mode, _str) \
        struct class_attribute_string class_attr_##_name = \
                _CLASS_ATTR_STRING(_name, _mode, _str)

extern ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
                        char *buf);

struct class_interface {
        struct list_head        node;
        struct class            *class;

        int (*add_dev)          (struct device *, struct class_interface *);
        void (*remove_dev)      (struct device *, struct class_interface *);
};

extern int __must_check class_interface_register(struct class_interface *);
extern void class_interface_unregister(struct class_interface *);

extern struct class * __must_check __class_create(struct module *owner,
                                                  const char *name,
                                                  struct lock_class_key *key);
extern void class_destroy(struct class *cls);

/* This is a #define to keep the compiler from merging different
 * instances of the __key variable */
#define class_create(owner, name)               \
({                                              \
        static struct lock_class_key __key;     \
        __class_create(owner, name, &__key);    \
})

/*
 * The type of device, "struct device" is embedded in. A class
 * or bus can contain devices of different types
 * like "partitions" and "disks", "mouse" and "event".
 * This identifies the device type and carries type-specific
 * information, equivalent to the kobj_type of a kobject.
 * If "name" is specified, the uevent will contain it in
 * the DEVTYPE variable.
 */
struct device_type {
        const char *name;
        const struct attribute_group **groups;
        int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
        char *(*devnode)(struct device *dev, umode_t *mode,
                         kuid_t *uid, kgid_t *gid);
        void (*release)(struct device *dev);

        const struct dev_pm_ops *pm;
};

/* interface for exporting device attributes */
struct device_attribute {
        struct attribute        attr;
        ssize_t (*show)(struct device *dev, struct device_attribute *attr,
                        char *buf);
        ssize_t (*store)(struct device *dev, struct device_attribute *attr,
                         const char *buf, size_t count);
};

struct dev_ext_attribute {
        struct device_attribute attr;
        void *var;
};

ssize_t device_show_ulong(struct device *dev, struct device_attribute *attr,
                          char *buf);
ssize_t device_store_ulong(struct device *dev, struct device_attribute *attr,
                           const char *buf, size_t count);
ssize_t device_show_int(struct device *dev, struct device_attribute *attr,
                        char *buf);
ssize_t device_store_int(struct device *dev, struct device_attribute *attr,
                         const char *buf, size_t count);
ssize_t device_show_bool(struct device *dev, struct device_attribute *attr,
                        char *buf);
ssize_t device_store_bool(struct device *dev, struct device_attribute *attr,
                         const char *buf, size_t count);

#define DEVICE_ATTR(_name, _mode, _show, _store) \
        struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
#define DEVICE_ATTR_RW(_name) \
        struct device_attribute dev_attr_##_name = __ATTR_RW(_name)
#define DEVICE_ATTR_RO(_name) \
        struct device_attribute dev_attr_##_name = __ATTR_RO(_name)
#define DEVICE_ATTR_WO(_name) \
        struct device_attribute dev_attr_##_name = __ATTR_WO(_name)
#define DEVICE_ULONG_ATTR(_name, _mode, _var) \
        struct dev_ext_attribute dev_attr_##_name = \
                { __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
#define DEVICE_INT_ATTR(_name, _mode, _var) \
        struct dev_ext_attribute dev_attr_##_name = \
                { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) }
#define DEVICE_BOOL_ATTR(_name, _mode, _var) \
        struct dev_ext_attribute dev_attr_##_name = \
                { __ATTR(_name, _mode, device_show_bool, device_store_bool), &(_var) }
#define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \
        struct device_attribute dev_attr_##_name =              \
                __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)

extern int device_create_file(struct device *device,
                              const struct device_attribute *entry);
extern void device_remove_file(struct device *dev,
                               const struct device_attribute *attr);
extern bool device_remove_file_self(struct device *dev,
                                    const struct device_attribute *attr);
extern int __must_check device_create_bin_file(struct device *dev,
                                        const struct bin_attribute *attr);
extern void device_remove_bin_file(struct device *dev,
                                   const struct bin_attribute *attr);

/* device resource management */
typedef void (*dr_release_t)(struct device *dev, void *res);
typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);

#ifdef CONFIG_DEBUG_DEVRES
extern void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
                                 int nid, const char *name) __malloc;
#define devres_alloc(release, size, gfp) \
        __devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release)
#define devres_alloc_node(release, size, gfp, nid) \
        __devres_alloc_node(release, size, gfp, nid, #release)
#else
extern void *devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
                               int nid) __malloc;
static inline void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp)
{
        return devres_alloc_node(release, size, gfp, NUMA_NO_NODE);
}
#endif

extern void devres_for_each_res(struct device *dev, dr_release_t release,
                                dr_match_t match, void *match_data,
                                void (*fn)(struct device *, void *, void *),
                                void *data);
extern void devres_free(void *res);
extern void devres_add(struct device *dev, void *res);
extern void *devres_find(struct device *dev, dr_release_t release,
                         dr_match_t match, void *match_data);
extern void *devres_get(struct device *dev, void *new_res,
                        dr_match_t match, void *match_data);
extern void *devres_remove(struct device *dev, dr_release_t release,
                           dr_match_t match, void *match_data);
extern int devres_destroy(struct device *dev, dr_release_t release,
                          dr_match_t match, void *match_data);
extern int devres_release(struct device *dev, dr_release_t release,
                          dr_match_t match, void *match_data);

/* devres group */
extern void * __must_check devres_open_group(struct device *dev, void *id,
                                             gfp_t gfp);
extern void devres_close_group(struct device *dev, void *id);
extern void devres_remove_group(struct device *dev, void *id);
extern int devres_release_group(struct device *dev, void *id);

/* managed devm_k.alloc/kfree for device drivers */
extern void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp) __malloc;
extern __printf(3, 0)
char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
                      va_list ap) __malloc;
extern __printf(3, 4)
char *devm_kasprintf(struct device *dev, gfp_t gfp, const char *fmt, ...) __malloc;
static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
{
        return devm_kmalloc(dev, size, gfp | __GFP_ZERO);
}
static inline void *devm_kmalloc_array(struct device *dev,
                                       size_t n, size_t size, gfp_t flags)
{
        if (size != 0 && n > SIZE_MAX / size)
                return NULL;
        return devm_kmalloc(dev, n * size, flags);
}
static inline void *devm_kcalloc(struct device *dev,
                                 size_t n, size_t size, gfp_t flags)
{
        return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO);
}
extern void devm_kfree(struct device *dev, void *p);
extern char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp) __malloc;
extern void *devm_kmemdup(struct device *dev, const void *src, size_t len,
                          gfp_t gfp);

extern unsigned long devm_get_free_pages(struct device *dev,
                                         gfp_t gfp_mask, unsigned int order);
extern void devm_free_pages(struct device *dev, unsigned long addr);

void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);

/* allows to add/remove a custom action to devres stack */
int devm_add_action(struct device *dev, void (*action)(void *), void *data);
void devm_remove_action(struct device *dev, void (*action)(void *), void *data);

static inline int devm_add_action_or_reset(struct device *dev,
                                           void (*action)(void *), void *data)
{
        int ret;

        ret = devm_add_action(dev, action, data);
        if (ret)
                action(data);

        return ret;
}

/**
 * devm_alloc_percpu - Resource-managed alloc_percpu
 * @dev: Device to allocate per-cpu memory for
 * @type: Type to allocate per-cpu memory for
 *
 * Managed alloc_percpu. Per-cpu memory allocated with this function is
 * automatically freed on driver detach.
 *
 * RETURNS:
 * Pointer to allocated memory on success, NULL on failure.
 */
#define devm_alloc_percpu(dev, type)      \
        ((typeof(type) __percpu *)__devm_alloc_percpu((dev), sizeof(type), \
                                                      __alignof__(type)))

void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
                                   size_t align);
void devm_free_percpu(struct device *dev, void __percpu *pdata);

struct device_dma_parameters {
        /*
         * a low level driver may set these to teach IOMMU code about
         * sg limitations.
         */
        unsigned int max_segment_size;
        unsigned long segment_boundary_mask;
};

/**
 * enum device_link_state - Device link states.
 * @DL_STATE_NONE: The presence of the drivers is not being tracked.
 * @DL_STATE_DORMANT: None of the supplier/consumer drivers is present.
 * @DL_STATE_AVAILABLE: The supplier driver is present, but the consumer is not.
 * @DL_STATE_CONSUMER_PROBE: The consumer is probing (supplier driver present).
 * @DL_STATE_ACTIVE: Both the supplier and consumer drivers are present.
 * @DL_STATE_SUPPLIER_UNBIND: The supplier driver is unbinding.
 */
enum device_link_state {
        DL_STATE_NONE = -1,
        DL_STATE_DORMANT = 0,
        DL_STATE_AVAILABLE,
        DL_STATE_CONSUMER_PROBE,
        DL_STATE_ACTIVE,
        DL_STATE_SUPPLIER_UNBIND,
};

/*
 * Device link flags.
 *
 * STATELESS: The core won't track the presence of supplier/consumer drivers.
 * AUTOREMOVE: Remove this link automatically on consumer driver unbind.
 * PM_RUNTIME: If set, the runtime PM framework will use this link.
 * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation.
 */
#define DL_FLAG_STATELESS       BIT(0)
#define DL_FLAG_AUTOREMOVE      BIT(1)
#define DL_FLAG_PM_RUNTIME      BIT(2)
#define DL_FLAG_RPM_ACTIVE      BIT(3)

/**
 * struct device_link - Device link representation.
 * @supplier: The device on the supplier end of the link.
 * @s_node: Hook to the supplier device's list of links to consumers.
 * @consumer: The device on the consumer end of the link.
 * @c_node: Hook to the consumer device's list of links to suppliers.
 * @status: The state of the link (with respect to the presence of drivers).
 * @flags: Link flags.
 * @rpm_active: Whether or not the consumer device is runtime-PM-active.
 * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks.
 */
struct device_link {
        struct device *supplier;
        struct list_head s_node;
        struct device *consumer;
        struct list_head c_node;
        enum device_link_state status;
        u32 flags;
        bool rpm_active;
#ifdef CONFIG_SRCU
        struct rcu_head rcu_head;
#endif
};

/**
 * enum dl_dev_state - Device driver presence tracking information.
 * @DL_DEV_NO_DRIVER: There is no driver attached to the device.
 * @DL_DEV_PROBING: A driver is probing.
 * @DL_DEV_DRIVER_BOUND: The driver has been bound to the device.
 * @DL_DEV_UNBINDING: The driver is unbinding from the device.
 */
enum dl_dev_state {
        DL_DEV_NO_DRIVER = 0,
        DL_DEV_PROBING,
        DL_DEV_DRIVER_BOUND,
        DL_DEV_UNBINDING,
};

/**
 * struct dev_links_info - Device data related to device links.
 * @suppliers: List of links to supplier devices.
 * @consumers: List of links to consumer devices.
 * @status: Driver status information.
 */
struct dev_links_info {
        struct list_head suppliers;
        struct list_head consumers;
        enum dl_dev_state status;
};

/**
 * struct device - The basic device structure
 * @parent:     The device's "parent" device, the device to which it is attached.
 *              In most cases, a parent device is some sort of bus or host
 *              controller. If parent is NULL, the device, is a top-level device,
 *              which is not usually what you want.
 * @p:          Holds the private data of the driver core portions of the device.
 *              See the comment of the struct device_private for detail.
 * @kobj:       A top-level, abstract class from which other classes are derived.
 * @init_name:  Initial name of the device.
 * @type:       The type of device.
 *              This identifies the device type and carries type-specific
 *              information.
 * @mutex:      Mutex to synchronize calls to its driver.
 * @bus:        Type of bus device is on.
 * @driver:     Which driver has allocated this
 * @platform_data: Platform data specific to the device.
 *              Example: For devices on custom boards, as typical of embedded
 *              and SOC based hardware, Linux often uses platform_data to point
 *              to board-specific structures describing devices and how they
 *              are wired.  That can include what ports are available, chip
 *              variants, which GPIO pins act in what additional roles, and so
 *              on.  This shrinks the "Board Support Packages" (BSPs) and
 *              minimizes board-specific #ifdefs in drivers.
 * @driver_data: Private pointer for driver specific info.
 * @links:      Links to suppliers and consumers of this device.
 * @power:      For device power management.
 *              See Documentation/power/admin-guide/devices.rst for details.
 * @pm_domain:  Provide callbacks that are executed during system suspend,
 *              hibernation, system resume and during runtime PM transitions
 *              along with subsystem-level and driver-level callbacks.
 * @pins:       For device pin management.
 *              See Documentation/driver-api/pinctl.rst for details.
 * @msi_list:   Hosts MSI descriptors
 * @msi_domain: The generic MSI domain this device is using.
 * @numa_node:  NUMA node this device is close to.
 * @dma_ops:    DMA mapping operations for this device.
 * @dma_mask:   Dma mask (if dma'ble device).
 * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
 *              hardware supports 64-bit addresses for consistent allocations
 *              such descriptors.
 * @dma_pfn_offset: offset of DMA memory range relatively of RAM
 * @dma_parms:  A low level driver may set these to teach IOMMU code about
 *              segment limitations.
 * @dma_pools:  Dma pools (if dma'ble device).
 * @dma_mem:    Internal for coherent mem override.
 * @cma_area:   Contiguous memory area for dma allocations
 * @archdata:   For arch-specific additions.
 * @of_node:    Associated device tree node.
 * @fwnode:     Associated device node supplied by platform firmware.
 * @devt:       For creating the sysfs "dev".
 * @id:         device instance
 * @devres_lock: Spinlock to protect the resource of the device.
 * @devres_head: The resources list of the device.
 * @knode_class: The node used to add the device to the class list.
 * @class:      The class of the device.
 * @groups:     Optional attribute groups.
 * @release:    Callback to free the device after all references have
 *              gone away. This should be set by the allocator of the
 *              device (i.e. the bus driver that discovered the device).
 * @iommu_group: IOMMU group the device belongs to.
 * @iommu_fwspec: IOMMU-specific properties supplied by firmware.
 *
 * @offline_disabled: If set, the device is permanently online.
 * @offline:    Set after successful invocation of bus type's .offline().
 * @of_node_reused: Set if the device-tree node is shared with an ancestor
 *              device.
 *
 * At the lowest level, every device in a Linux system is represented by an
 * instance of struct device. The device structure contains the information
 * that the device model core needs to model the system. Most subsystems,
 * however, track additional information about the devices they host. As a
 * result, it is rare for devices to be represented by bare device structures;
 * instead, that structure, like kobject structures, is usually embedded within
 * a higher-level representation of the device.
 */
struct device {
        struct device           *parent;

        struct device_private   *p;

        struct kobject kobj;
        const char              *init_name; /* initial name of the device */
        const struct device_type *type;

        struct mutex            mutex;  /* mutex to synchronize calls to
                                         * its driver.
                                         */

        struct bus_type *bus;           /* type of bus device is on */
        struct device_driver *driver;   /* which driver has allocated this
                                           device */
        void            *platform_data; /* Platform specific data, device
                                           core doesn't touch it */
        void            *driver_data;   /* Driver data, set and get with
                                           dev_set/get_drvdata */
        struct dev_links_info   links;
        struct dev_pm_info      power;
        struct dev_pm_domain    *pm_domain;

#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
        struct irq_domain       *msi_domain;
#endif
#ifdef CONFIG_PINCTRL
        struct dev_pin_info     *pins;
#endif
#ifdef CONFIG_GENERIC_MSI_IRQ
        struct list_head        msi_list;
#endif

#ifdef CONFIG_NUMA
        int             numa_node;      /* NUMA node this device is close to */
#endif
        const struct dma_map_ops *dma_ops;
        u64             *dma_mask;      /* dma mask (if dma'able device) */
        u64             coherent_dma_mask;/* Like dma_mask, but for
                                             alloc_coherent mappings as
                                             not all hardware supports
                                             64 bit addresses for consistent
                                             allocations such descriptors. */
        unsigned long   dma_pfn_offset;

        struct device_dma_parameters *dma_parms;

        struct list_head        dma_pools;      /* dma pools (if dma'ble) */

        struct dma_coherent_mem *dma_mem; /* internal for coherent mem
                                             override */
#ifdef CONFIG_DMA_CMA
        struct cma *cma_area;           /* contiguous memory area for dma
                                           allocations */
#endif
        /* arch specific additions */
        struct dev_archdata     archdata;

        struct device_node      *of_node; /* associated device tree node */
        struct fwnode_handle    *fwnode; /* firmware device node */

        dev_t                   devt;   /* dev_t, creates the sysfs "dev" */
        u32                     id;     /* device instance */

        spinlock_t              devres_lock;
        struct list_head        devres_head;

        struct klist_node       knode_class;
        struct class            *class;
        const struct attribute_group **groups;  /* optional groups */

        void    (*release)(struct device *dev);
        struct iommu_group      *iommu_group;
        struct iommu_fwspec     *iommu_fwspec;

        bool                    offline_disabled:1;
        bool                    offline:1;
        bool                    of_node_reused:1;
};

static inline struct device *kobj_to_dev(struct kobject *kobj)
{
        return container_of(kobj, struct device, kobj);
}

/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>

static inline const char *dev_name(const struct device *dev)
{
        /* Use the init name until the kobject becomes available */
        if (dev->init_name)
                return dev->init_name;

        return kobject_name(&dev->kobj);
}

extern __printf(2, 3)
int dev_set_name(struct device *dev, const char *name, ...);

#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
        return dev->numa_node;
}
static inline void set_dev_node(struct device *dev, int node)
{
        dev->numa_node = node;
}
#else
static inline int dev_to_node(struct device *dev)
{
        return -1;
}
static inline void set_dev_node(struct device *dev, int node)
{
}
#endif

static inline struct irq_domain *dev_get_msi_domain(const struct device *dev)
{
#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
        return dev->msi_domain;
#else
        return NULL;
#endif
}

static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d)
{
#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
        dev->msi_domain = d;
#endif
}

static inline void *dev_get_drvdata(const struct device *dev)
{
        return dev->driver_data;
}

static inline void dev_set_drvdata(struct device *dev, void *data)
{
        dev->driver_data = data;
}

static inline struct pm_subsys_data *dev_to_psd(struct device *dev)
{
        return dev ? dev->power.subsys_data : NULL;
}

static inline unsigned int dev_get_uevent_suppress(const struct device *dev)
{
        return dev->kobj.uevent_suppress;
}

static inline void dev_set_uevent_suppress(struct device *dev, int val)
{
        dev->kobj.uevent_suppress = val;
}

static inline int device_is_registered(struct device *dev)
{
        return dev->kobj.state_in_sysfs;
}

static inline void device_enable_async_suspend(struct device *dev)
{
        if (!dev->power.is_prepared)
                dev->power.async_suspend = true;
}

static inline void device_disable_async_suspend(struct device *dev)
{
        if (!dev->power.is_prepared)
                dev->power.async_suspend = false;
}

static inline bool device_async_suspend_enabled(struct device *dev)
{
        return !!dev->power.async_suspend;
}

static inline void dev_pm_syscore_device(struct device *dev, bool val)
{
#ifdef CONFIG_PM_SLEEP
        dev->power.syscore = val;
#endif
}

static inline void device_lock(struct device *dev)
{
        mutex_lock(&dev->mutex);
}

static inline int device_lock_interruptible(struct device *dev)
{
        return mutex_lock_interruptible(&dev->mutex);
}

static inline int device_trylock(struct device *dev)
{
        return mutex_trylock(&dev->mutex);
}

static inline void device_unlock(struct device *dev)
{
        mutex_unlock(&dev->mutex);
}

static inline void device_lock_assert(struct device *dev)
{
        lockdep_assert_held(&dev->mutex);
}

static inline struct device_node *dev_of_node(struct device *dev)
{
        if (!IS_ENABLED(CONFIG_OF))
                return NULL;
        return dev->of_node;
}

void driver_init(void);

/*
 * High level routines for use by the bus drivers
 */
extern int __must_check device_register(struct device *dev);
extern void device_unregister(struct device *dev);
extern void device_initialize(struct device *dev);
extern int __must_check device_add(struct device *dev);
extern void device_del(struct device *dev);
extern int device_for_each_child(struct device *dev, void *data,
                     int (*fn)(struct device *dev, void *data));
extern int device_for_each_child_reverse(struct device *dev, void *data,
                     int (*fn)(struct device *dev, void *data));
extern struct device *device_find_child(struct device *dev, void *data,
                                int (*match)(struct device *dev, void *data));
extern int device_rename(struct device *dev, const char *new_name);
extern int device_move(struct device *dev, struct device *new_parent,
                       enum dpm_order dpm_order);
extern const char *device_get_devnode(struct device *dev,
                                      umode_t *mode, kuid_t *uid, kgid_t *gid,
                                      const char **tmp);

static inline bool device_supports_offline(struct device *dev)
{
        return dev->bus && dev->bus->offline && dev->bus->online;
}

extern void lock_device_hotplug(void);
extern void unlock_device_hotplug(void);
extern int lock_device_hotplug_sysfs(void);
extern int device_offline(struct device *dev);
extern int device_online(struct device *dev);
extern void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
extern void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
void device_set_of_node_from_dev(struct device *dev, const struct device *dev2);

static inline int dev_num_vf(struct device *dev)
{
        if (dev->bus && dev->bus->num_vf)
                return dev->bus->num_vf(dev);
        return 0;
}

/*
 * Root device objects for grouping under /sys/devices
 */
extern struct device *__root_device_register(const char *name,
                                             struct module *owner);

/* This is a macro to avoid include problems with THIS_MODULE */
#define root_device_register(name) \
        __root_device_register(name, THIS_MODULE)

extern void root_device_unregister(struct device *root);

static inline void *dev_get_platdata(const struct device *dev)
{
        return dev->platform_data;
}

/*
 * Manual binding of a device to driver. See drivers/base/bus.c
 * for information on use.
 */
extern int __must_check device_bind_driver(struct device *dev);
extern void device_release_driver(struct device *dev);
extern int  __must_check device_attach(struct device *dev);
extern int __must_check driver_attach(struct device_driver *drv);
extern void device_initial_probe(struct device *dev);
extern int __must_check device_reprobe(struct device *dev);

extern bool device_is_bound(struct device *dev);

/*
 * Easy functions for dynamically creating devices on the fly
 */
extern __printf(5, 0)
struct device *device_create_vargs(struct class *cls, struct device *parent,
                                   dev_t devt, void *drvdata,
                                   const char *fmt, va_list vargs);
extern __printf(5, 6)
struct device *device_create(struct class *cls, struct device *parent,
                             dev_t devt, void *drvdata,
                             const char *fmt, ...);
extern __printf(6, 7)
struct device *device_create_with_groups(struct class *cls,
                             struct device *parent, dev_t devt, void *drvdata,
                             const struct attribute_group **groups,
                             const char *fmt, ...);
extern void device_destroy(struct class *cls, dev_t devt);

extern int __must_check device_add_groups(struct device *dev,
                                        const struct attribute_group **groups);
extern void device_remove_groups(struct device *dev,
                                 const struct attribute_group **groups);

static inline int __must_check device_add_group(struct device *dev,
                                        const struct attribute_group *grp)
{
        const struct attribute_group *groups[] = { grp, NULL };

        return device_add_groups(dev, groups);
}

static inline void device_remove_group(struct device *dev,
                                       const struct attribute_group *grp)
{
        const struct attribute_group *groups[] = { grp, NULL };

        return device_remove_groups(dev, groups);
}

extern int __must_check devm_device_add_groups(struct device *dev,
                                        const struct attribute_group **groups);
extern void devm_device_remove_groups(struct device *dev,
                                      const struct attribute_group **groups);
extern int __must_check devm_device_add_group(struct device *dev,
                                        const struct attribute_group *grp);
extern void devm_device_remove_group(struct device *dev,
                                     const struct attribute_group *grp);

/*
 * Platform "fixup" functions - allow the platform to have their say
 * about devices and actions that the general device layer doesn't
 * know about.
 */
/* Notify platform of device discovery */
extern int (*platform_notify)(struct device *dev);

extern int (*platform_notify_remove)(struct device *dev);


/*
 * get_device - atomically increment the reference count for the device.
 *
 */
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);

#ifdef CONFIG_DEVTMPFS
extern int devtmpfs_create_node(struct device *dev);
extern int devtmpfs_delete_node(struct device *dev);
extern int devtmpfs_mount(const char *mntdir);
#else
static inline int devtmpfs_create_node(struct device *dev) { return 0; }
static inline int devtmpfs_delete_node(struct device *dev) { return 0; }
static inline int devtmpfs_mount(const char *mountpoint) { return 0; }
#endif

/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);

/* debugging and troubleshooting/diagnostic helpers. */
extern const char *dev_driver_string(const struct device *dev);

/* Device links interface. */
struct device_link *device_link_add(struct device *consumer,
                                    struct device *supplier, u32 flags);
void device_link_del(struct device_link *link);

#ifdef CONFIG_PRINTK

extern __printf(3, 0)
int dev_vprintk_emit(int level, const struct device *dev,
                     const char *fmt, va_list args);
extern __printf(3, 4)
int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...);

extern __printf(3, 4)
void dev_printk(const char *level, const struct device *dev,
                const char *fmt, ...);
extern __printf(2, 3)
void dev_emerg(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void dev_alert(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void dev_crit(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void dev_err(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void dev_warn(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void dev_notice(const struct device *dev, const char *fmt, ...);
extern __printf(2, 3)
void _dev_info(const struct device *dev, const char *fmt, ...);

#else

static inline __printf(3, 0)
int dev_vprintk_emit(int level, const struct device *dev,
                     const char *fmt, va_list args)
{ return 0; }
static inline __printf(3, 4)
int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...)
{ return 0; }

static inline void __dev_printk(const char *level, const struct device *dev,
                                struct va_format *vaf)
{}
static inline __printf(3, 4)
void dev_printk(const char *level, const struct device *dev,
                const char *fmt, ...)
{}

static inline __printf(2, 3)
void dev_emerg(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void dev_crit(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void dev_alert(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void dev_err(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void dev_warn(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void dev_notice(const struct device *dev, const char *fmt, ...)
{}
static inline __printf(2, 3)
void _dev_info(const struct device *dev, const char *fmt, ...)
{}

#endif

/*
 * Stupid hackaround for existing uses of non-printk uses dev_info
 *
 * Note that the definition of dev_info below is actually _dev_info
 * and a macro is used to avoid redefining dev_info
 */

#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)

#if defined(CONFIG_DYNAMIC_DEBUG)
#define dev_dbg(dev, format, ...)                    \
do {                                                 \
        dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
} while (0)
#elif defined(DEBUG)
#define dev_dbg(dev, format, arg...)            \
        dev_printk(KERN_DEBUG, dev, format, ##arg)
#else
#define dev_dbg(dev, format, arg...)                            \
({                                                              \
        if (0)                                                  \
                dev_printk(KERN_DEBUG, dev, format, ##arg);     \
})
#endif

#ifdef CONFIG_PRINTK
#define dev_level_once(dev_level, dev, fmt, ...)                        \
do {                                                                    \
        static bool __print_once __read_mostly;                         \
                                                                        \
        if (!__print_once) {                                            \
                __print_once = true;                                    \
                dev_level(dev, fmt, ##__VA_ARGS__);                     \
        }                                                               \
} while (0)
#else
#define dev_level_once(dev_level, dev, fmt, ...)                        \
do {                                                                    \
        if (0)                                                          \
                dev_level(dev, fmt, ##__VA_ARGS__);                     \
} while (0)
#endif

#define dev_emerg_once(dev, fmt, ...)                                   \
        dev_level_once(dev_emerg, dev, fmt, ##__VA_ARGS__)
#define dev_alert_once(dev, fmt, ...)                                   \
        dev_level_once(dev_alert, dev, fmt, ##__VA_ARGS__)
#define dev_crit_once(dev, fmt, ...)                                    \
        dev_level_once(dev_crit, dev, fmt, ##__VA_ARGS__)
#define dev_err_once(dev, fmt, ...)                                     \
        dev_level_once(dev_err, dev, fmt, ##__VA_ARGS__)
#define dev_warn_once(dev, fmt, ...)                                    \
        dev_level_once(dev_warn, dev, fmt, ##__VA_ARGS__)
#define dev_notice_once(dev, fmt, ...)                                  \
        dev_level_once(dev_notice, dev, fmt, ##__VA_ARGS__)
#define dev_info_once(dev, fmt, ...)                                    \
        dev_level_once(dev_info, dev, fmt, ##__VA_ARGS__)
#define dev_dbg_once(dev, fmt, ...)                                     \
        dev_level_once(dev_dbg, dev, fmt, ##__VA_ARGS__)

#define dev_level_ratelimited(dev_level, dev, fmt, ...)                 \
do {                                                                    \
        static DEFINE_RATELIMIT_STATE(_rs,                              \
                                      DEFAULT_RATELIMIT_INTERVAL,       \
                                      DEFAULT_RATELIMIT_BURST);         \
        if (__ratelimit(&_rs))                                          \
                dev_level(dev, fmt, ##__VA_ARGS__);                     \
} while (0)

#define dev_emerg_ratelimited(dev, fmt, ...)                            \
        dev_level_ratelimited(dev_emerg, dev, fmt, ##__VA_ARGS__)
#define dev_alert_ratelimited(dev, fmt, ...)                            \
        dev_level_ratelimited(dev_alert, dev, fmt, ##__VA_ARGS__)
#define dev_crit_ratelimited(dev, fmt, ...)                             \
        dev_level_ratelimited(dev_crit, dev, fmt, ##__VA_ARGS__)
#define dev_err_ratelimited(dev, fmt, ...)                              \
        dev_level_ratelimited(dev_err, dev, fmt, ##__VA_ARGS__)
#define dev_warn_ratelimited(dev, fmt, ...)                             \
        dev_level_ratelimited(dev_warn, dev, fmt, ##__VA_ARGS__)
#define dev_notice_ratelimited(dev, fmt, ...)                           \
        dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
#define dev_info_ratelimited(dev, fmt, ...)                             \
        dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
#if defined(CONFIG_DYNAMIC_DEBUG)
/* descriptor check is first to prevent flooding with "callbacks suppressed" */
#define dev_dbg_ratelimited(dev, fmt, ...)                              \
do {                                                                    \
        static DEFINE_RATELIMIT_STATE(_rs,                              \
                                      DEFAULT_RATELIMIT_INTERVAL,       \
                                      DEFAULT_RATELIMIT_BURST);         \
        DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);                 \
        if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) &&        \
            __ratelimit(&_rs))                                          \
                __dynamic_dev_dbg(&descriptor, dev, fmt,                \
                                  ##__VA_ARGS__);                       \
} while (0)
#elif defined(DEBUG)
#define dev_dbg_ratelimited(dev, fmt, ...)                              \
do {                                                                    \
        static DEFINE_RATELIMIT_STATE(_rs,                              \
                                      DEFAULT_RATELIMIT_INTERVAL,       \
                                      DEFAULT_RATELIMIT_BURST);         \
        if (__ratelimit(&_rs))                                          \
                dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__);        \
} while (0)
#else
#define dev_dbg_ratelimited(dev, fmt, ...)                              \
do {                                                                    \
        if (0)                                                          \
                dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__);        \
} while (0)
#endif

#ifdef VERBOSE_DEBUG
#define dev_vdbg        dev_dbg
#else
#define dev_vdbg(dev, format, arg...)                           \
({                                                              \
        if (0)                                                  \
                dev_printk(KERN_DEBUG, dev, format, ##arg);     \
})
#endif

/*
 * dev_WARN*() acts like dev_printk(), but with the key difference of
 * using WARN/WARN_ONCE to include file/line information and a backtrace.
 */
#define dev_WARN(dev, format, arg...) \
        WARN(1, "%s %s: " format, dev_driver_string(dev), dev_name(dev), ## arg);

#define dev_WARN_ONCE(dev, condition, format, arg...) \
        WARN_ONCE(condition, "%s %s: " format, \
                        dev_driver_string(dev), dev_name(dev), ## arg)

/* Create alias, so I can be autoloaded. */
#define MODULE_ALIAS_CHARDEV(major,minor) \
        MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
#define MODULE_ALIAS_CHARDEV_MAJOR(major) \
        MODULE_ALIAS("char-major-" __stringify(major) "-*")

#ifdef CONFIG_SYSFS_DEPRECATED
extern long sysfs_deprecated;
#else
#define sysfs_deprecated 0
#endif

/**
 * module_driver() - Helper macro for drivers that don't do anything
 * special in module init/exit. This eliminates a lot of boilerplate.
 * Each module may only use this macro once, and calling it replaces
 * module_init() and module_exit().
 *
 * @__driver: driver name
 * @__register: register function for this driver type
 * @__unregister: unregister function for this driver type
 * @...: Additional arguments to be passed to __register and __unregister.
 *
 * Use this macro to construct bus specific macros for registering
 * drivers, and do not use it on its own.
 */
#define module_driver(__driver, __register, __unregister, ...) \
static int __init __driver##_init(void) \
{ \
        return __register(&(__driver) , ##__VA_ARGS__); \
} \
module_init(__driver##_init); \
static void __exit __driver##_exit(void) \
{ \
        __unregister(&(__driver) , ##__VA_ARGS__); \
} \
module_exit(__driver##_exit);

/**
 * builtin_driver() - Helper macro for drivers that don't do anything
 * special in init and have no exit. This eliminates some boilerplate.
 * Each driver may only use this macro once, and calling it replaces
 * device_initcall (or in some cases, the legacy __initcall).  This is
 * meant to be a direct parallel of module_driver() above but without
 * the __exit stuff that is not used for builtin cases.
 *
 * @__driver: driver name
 * @__register: register function for this driver type
 * @...: Additional arguments to be passed to __register
 *
 * Use this macro to construct bus specific macros for registering
 * drivers, and do not use it on its own.
 */
#define builtin_driver(__driver, __register, ...) \
static int __init __driver##_init(void) \
{ \
        return __register(&(__driver) , ##__VA_ARGS__); \
} \
device_initcall(__driver##_init);

#endif /* _DEVICE_H_ */