1 /* SPDX-License-Identifier: GPL-2.0 */
3 * ethtool.h: Defines for Linux ethtool.
5 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9 * christopher.leech@intel.com,
10 * scott.feldman@intel.com)
11 * Portions Copyright (C) Sun Microsystems 2008
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
22 struct compat_ethtool_rx_flow_spec
{
24 union ethtool_flow_union h_u
;
25 struct ethtool_flow_ext h_ext
;
26 union ethtool_flow_union m_u
;
27 struct ethtool_flow_ext m_ext
;
28 compat_u64 ring_cookie
;
32 struct compat_ethtool_rxnfc
{
36 struct compat_ethtool_rx_flow_spec fs
;
41 #endif /* CONFIG_COMPAT */
43 #include <linux/rculist.h>
46 * enum ethtool_phys_id_state - indicator state for physical identification
47 * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48 * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49 * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
51 * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
54 enum ethtool_phys_id_state
{
62 ETH_RSS_HASH_TOP_BIT
, /* Configurable RSS hash function - Toeplitz */
63 ETH_RSS_HASH_XOR_BIT
, /* Configurable RSS hash function - Xor */
64 ETH_RSS_HASH_CRC32_BIT
, /* Configurable RSS hash function - Crc32 */
67 * Add your fresh new hash function bits above and remember to update
68 * rss_hash_func_strings[] in ethtool.c
70 ETH_RSS_HASH_FUNCS_COUNT
73 #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
74 #define __ETH_RSS_HASH(name) __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
76 #define ETH_RSS_HASH_TOP __ETH_RSS_HASH(TOP)
77 #define ETH_RSS_HASH_XOR __ETH_RSS_HASH(XOR)
78 #define ETH_RSS_HASH_CRC32 __ETH_RSS_HASH(CRC32)
80 #define ETH_RSS_HASH_UNKNOWN 0
81 #define ETH_RSS_HASH_NO_CHANGE 0
85 /* Some generic methods drivers may use in their ethtool_ops */
86 u32
ethtool_op_get_link(struct net_device
*dev
);
87 int ethtool_op_get_ts_info(struct net_device
*dev
, struct ethtool_ts_info
*eti
);
91 * struct ethtool_link_ext_state_info - link extended state and substate.
93 struct ethtool_link_ext_state_info
{
94 enum ethtool_link_ext_state link_ext_state
;
96 enum ethtool_link_ext_substate_autoneg autoneg
;
97 enum ethtool_link_ext_substate_link_training link_training
;
98 enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch
;
99 enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity
;
100 enum ethtool_link_ext_substate_cable_issue cable_issue
;
101 u8 __link_ext_substate
;
106 * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
107 * @index: Index in RX flow hash indirection table
108 * @n_rx_rings: Number of RX rings to use
110 * This function provides the default policy for RX flow hash indirection.
112 static inline u32
ethtool_rxfh_indir_default(u32 index
, u32 n_rx_rings
)
114 return index
% n_rx_rings
;
117 /* declare a link mode bitmap */
118 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \
119 DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
121 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
122 * fields, but they are allowed to overwrite them (will be ignored).
124 struct ethtool_link_ksettings
{
125 struct ethtool_link_settings base
;
127 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported
);
128 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising
);
129 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising
);
135 * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
136 * @ptr : pointer to struct ethtool_link_ksettings
137 * @name : one of supported/advertising/lp_advertising
139 #define ethtool_link_ksettings_zero_link_mode(ptr, name) \
140 bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
143 * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
145 * @ptr : pointer to struct ethtool_link_ksettings
146 * @name : one of supported/advertising/lp_advertising
147 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
148 * (not atomic, no bound checking)
150 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode) \
151 __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
154 * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
156 * @ptr : pointer to struct ethtool_link_ksettings
157 * @name : one of supported/advertising/lp_advertising
158 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
159 * (not atomic, no bound checking)
161 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode) \
162 __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
165 * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
166 * @ptr : pointer to struct ethtool_link_ksettings
167 * @name : one of supported/advertising/lp_advertising
168 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
169 * (not atomic, no bound checking)
171 * Returns true/false.
173 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode) \
174 test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
177 __ethtool_get_link_ksettings(struct net_device
*dev
,
178 struct ethtool_link_ksettings
*link_ksettings
);
181 * ethtool_intersect_link_masks - Given two link masks, AND them together
182 * @dst: first mask and where result is stored
183 * @src: second mask to intersect with
185 * Given two link mode masks, AND them together and save the result in dst.
187 void ethtool_intersect_link_masks(struct ethtool_link_ksettings
*dst
,
188 struct ethtool_link_ksettings
*src
);
190 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst
,
193 /* return false if src had higher bits set. lower bits always updated. */
194 bool ethtool_convert_link_mode_to_legacy_u32(u32
*legacy_u32
,
195 const unsigned long *src
);
197 #define ETHTOOL_COALESCE_RX_USECS BIT(0)
198 #define ETHTOOL_COALESCE_RX_MAX_FRAMES BIT(1)
199 #define ETHTOOL_COALESCE_RX_USECS_IRQ BIT(2)
200 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ BIT(3)
201 #define ETHTOOL_COALESCE_TX_USECS BIT(4)
202 #define ETHTOOL_COALESCE_TX_MAX_FRAMES BIT(5)
203 #define ETHTOOL_COALESCE_TX_USECS_IRQ BIT(6)
204 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ BIT(7)
205 #define ETHTOOL_COALESCE_STATS_BLOCK_USECS BIT(8)
206 #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX BIT(9)
207 #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX BIT(10)
208 #define ETHTOOL_COALESCE_PKT_RATE_LOW BIT(11)
209 #define ETHTOOL_COALESCE_RX_USECS_LOW BIT(12)
210 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW BIT(13)
211 #define ETHTOOL_COALESCE_TX_USECS_LOW BIT(14)
212 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW BIT(15)
213 #define ETHTOOL_COALESCE_PKT_RATE_HIGH BIT(16)
214 #define ETHTOOL_COALESCE_RX_USECS_HIGH BIT(17)
215 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH BIT(18)
216 #define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19)
217 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20)
218 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21)
219 #define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(21, 0)
221 #define ETHTOOL_COALESCE_USECS \
222 (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
223 #define ETHTOOL_COALESCE_MAX_FRAMES \
224 (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
225 #define ETHTOOL_COALESCE_USECS_IRQ \
226 (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
227 #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ \
228 (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ | \
229 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
230 #define ETHTOOL_COALESCE_USE_ADAPTIVE \
231 (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
232 #define ETHTOOL_COALESCE_USECS_LOW_HIGH \
233 (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
234 ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
235 #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH \
236 (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW | \
237 ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW | \
238 ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH | \
239 ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
240 #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS \
241 (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | \
242 ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
243 ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
244 ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
246 #define ETHTOOL_STAT_NOT_SET (~0ULL)
249 * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames
250 * @tx_pause_frames: transmitted pause frame count. Reported to user space
251 * as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES.
253 * Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted`
256 * @rx_pause_frames: received pause frame count. Reported to user space
257 * as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to:
259 * Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived`
262 struct ethtool_pause_stats
{
268 * struct ethtool_ops - optional netdev operations
269 * @cap_link_lanes_supported: indicates if the driver supports lanes
271 * @supported_coalesce_params: supported types of interrupt coalescing.
272 * @get_drvinfo: Report driver/device information. Should only set the
273 * @driver, @version, @fw_version and @bus_info fields. If not
274 * implemented, the @driver and @bus_info fields will be filled in
275 * according to the netdev's parent device.
276 * @get_regs_len: Get buffer length required for @get_regs
277 * @get_regs: Get device registers
278 * @get_wol: Report whether Wake-on-Lan is enabled
279 * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code
281 * @get_msglevel: Report driver message level. This should be the value
282 * of the @msg_enable field used by netif logging functions.
283 * @set_msglevel: Set driver message level
284 * @nway_reset: Restart autonegotiation. Returns a negative error code
286 * @get_link: Report whether physical link is up. Will only be called if
287 * the netdev is up. Should usually be set to ethtool_op_get_link(),
288 * which uses netif_carrier_ok().
289 * @get_link_ext_state: Report link extended state. Should set link_ext_state and
290 * link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
291 * do not attach ext_substate attribute to netlink message). If link_ext_state
292 * and link_ext_substate are unknown, return -ENODATA. If not implemented,
293 * link_ext_state and link_ext_substate will not be sent to userspace.
294 * @get_eeprom: Read data from the device EEPROM.
295 * Should fill in the magic field. Don't need to check len for zero
296 * or wraparound. Fill in the data argument with the eeprom values
297 * from offset to offset + len. Update len to the amount read.
298 * Returns an error or zero.
299 * @set_eeprom: Write data to the device EEPROM.
300 * Should validate the magic field. Don't need to check len for zero
301 * or wraparound. Update len to the amount written. Returns an error
303 * @get_coalesce: Get interrupt coalescing parameters. Returns a negative
304 * error code or zero.
305 * @set_coalesce: Set interrupt coalescing parameters. Supported coalescing
306 * types should be set in @supported_coalesce_params.
307 * Returns a negative error code or zero.
308 * @get_ringparam: Report ring sizes
309 * @set_ringparam: Set ring sizes. Returns a negative error code or zero.
310 * @get_pause_stats: Report pause frame statistics. Drivers must not zero
311 * statistics which they don't report. The stats structure is initialized
312 * to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics.
313 * @get_pauseparam: Report pause parameters
314 * @set_pauseparam: Set pause parameters. Returns a negative error code
316 * @self_test: Run specified self-tests
317 * @get_strings: Return a set of strings that describe the requested objects
318 * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
319 * attached to it. The implementation may update the indicator
320 * asynchronously or synchronously, but in either case it must return
321 * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
322 * and must either activate asynchronous updates and return zero, return
323 * a negative error or return a positive frequency for synchronous
324 * indication (e.g. 1 for one on/off cycle per second). If it returns
325 * a frequency then it will be called again at intervals with the
326 * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
327 * the indicator accordingly. Finally, it is called with the argument
328 * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
329 * negative error code or zero.
330 * @get_ethtool_stats: Return extended statistics about the device.
331 * This is only useful if the device maintains statistics not
332 * included in &struct rtnl_link_stats64.
333 * @begin: Function to be called before any other operation. Returns a
334 * negative error code or zero.
335 * @complete: Function to be called after any other operation except
336 * @begin. Will be called even if the other operation failed.
337 * @get_priv_flags: Report driver-specific feature flags.
338 * @set_priv_flags: Set driver-specific feature flags. Returns a negative
339 * error code or zero.
340 * @get_sset_count: Get number of strings that @get_strings will write.
341 * @get_rxnfc: Get RX flow classification rules. Returns a negative
342 * error code or zero.
343 * @set_rxnfc: Set RX flow classification rules. Returns a negative
344 * error code or zero.
345 * @flash_device: Write a firmware image to device's flash memory.
346 * Returns a negative error code or zero.
347 * @reset: Reset (part of) the device, as specified by a bitmask of
348 * flags from &enum ethtool_reset_flags. Returns a negative
349 * error code or zero.
350 * @get_rxfh_key_size: Get the size of the RX flow hash key.
351 * Returns zero if not supported for this specific device.
352 * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
353 * Returns zero if not supported for this specific device.
354 * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
355 * and/or hash function.
356 * Returns a negative error code or zero.
357 * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
358 * key, and/or hash function. Arguments which are set to %NULL or zero
359 * will remain unchanged.
360 * Returns a negative error code or zero. An error code must be returned
361 * if at least one unsupported change was requested.
362 * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
363 * hash key, and/or hash function assiciated to the given rss context.
364 * Returns a negative error code or zero.
365 * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
366 * the contents of the RX flow hash indirection table, hash key, and/or
367 * hash function associated to the given context. Arguments which are set
368 * to %NULL or zero will remain unchanged.
369 * Returns a negative error code or zero. An error code must be returned
370 * if at least one unsupported change was requested.
371 * @get_channels: Get number of channels.
372 * @set_channels: Set number of channels. Returns a negative error code or
374 * @get_dump_flag: Get dump flag indicating current dump length, version,
375 * and flag of the device.
376 * @get_dump_data: Get dump data.
377 * @set_dump: Set dump specific flags to the device.
378 * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
379 * Drivers supporting transmit time stamps in software should set this to
380 * ethtool_op_get_ts_info().
381 * @get_module_info: Get the size and type of the eeprom contained within
383 * @get_module_eeprom: Get the eeprom information from the plug-in module
384 * @get_eee: Get Energy-Efficient (EEE) supported and status.
385 * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
386 * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
387 * It must check that the given queue number is valid. If neither a RX nor
388 * a TX queue has this number, return -EINVAL. If only a RX queue or a TX
389 * queue has this number, set the inapplicable fields to ~0 and return 0.
390 * Returns a negative error code or zero.
391 * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
392 * It must check that the given queue number is valid. If neither a RX nor
393 * a TX queue has this number, return -EINVAL. If only a RX queue or a TX
394 * queue has this number, ignore the inapplicable fields. Supported
395 * coalescing types should be set in @supported_coalesce_params.
396 * Returns a negative error code or zero.
397 * @get_link_ksettings: Get various device settings including Ethernet link
398 * settings. The %cmd and %link_mode_masks_nwords fields should be
399 * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
400 * any change to them will be overwritten by kernel. Returns a negative
401 * error code or zero.
402 * @set_link_ksettings: Set various device settings including Ethernet link
403 * settings. The %cmd and %link_mode_masks_nwords fields should be
404 * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
405 * any change to them will be overwritten by kernel. Returns a negative
406 * error code or zero.
407 * @get_fecparam: Get the network device Forward Error Correction parameters.
408 * @set_fecparam: Set the network device Forward Error Correction parameters.
409 * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
410 * This is only useful if the device maintains PHY statistics and
411 * cannot use the standard PHY library helpers.
413 * All operations are optional (i.e. the function pointer may be set
414 * to %NULL) and callers must take this into account. Callers must
415 * hold the RTNL lock.
417 * See the structures used by these operations for further documentation.
418 * Note that for all operations using a structure ending with a zero-
419 * length array, the array is allocated separately in the kernel and
420 * is passed to the driver as an additional parameter.
422 * See &struct net_device and &struct net_device_ops for documentation
423 * of the generic netdev features interface.
426 u32 cap_link_lanes_supported
:1;
427 u32 supported_coalesce_params
;
428 void (*get_drvinfo
)(struct net_device
*, struct ethtool_drvinfo
*);
429 int (*get_regs_len
)(struct net_device
*);
430 void (*get_regs
)(struct net_device
*, struct ethtool_regs
*, void *);
431 void (*get_wol
)(struct net_device
*, struct ethtool_wolinfo
*);
432 int (*set_wol
)(struct net_device
*, struct ethtool_wolinfo
*);
433 u32 (*get_msglevel
)(struct net_device
*);
434 void (*set_msglevel
)(struct net_device
*, u32
);
435 int (*nway_reset
)(struct net_device
*);
436 u32 (*get_link
)(struct net_device
*);
437 int (*get_link_ext_state
)(struct net_device
*,
438 struct ethtool_link_ext_state_info
*);
439 int (*get_eeprom_len
)(struct net_device
*);
440 int (*get_eeprom
)(struct net_device
*,
441 struct ethtool_eeprom
*, u8
*);
442 int (*set_eeprom
)(struct net_device
*,
443 struct ethtool_eeprom
*, u8
*);
444 int (*get_coalesce
)(struct net_device
*, struct ethtool_coalesce
*);
445 int (*set_coalesce
)(struct net_device
*, struct ethtool_coalesce
*);
446 void (*get_ringparam
)(struct net_device
*,
447 struct ethtool_ringparam
*);
448 int (*set_ringparam
)(struct net_device
*,
449 struct ethtool_ringparam
*);
450 void (*get_pause_stats
)(struct net_device
*dev
,
451 struct ethtool_pause_stats
*pause_stats
);
452 void (*get_pauseparam
)(struct net_device
*,
453 struct ethtool_pauseparam
*);
454 int (*set_pauseparam
)(struct net_device
*,
455 struct ethtool_pauseparam
*);
456 void (*self_test
)(struct net_device
*, struct ethtool_test
*, u64
*);
457 void (*get_strings
)(struct net_device
*, u32 stringset
, u8
*);
458 int (*set_phys_id
)(struct net_device
*, enum ethtool_phys_id_state
);
459 void (*get_ethtool_stats
)(struct net_device
*,
460 struct ethtool_stats
*, u64
*);
461 int (*begin
)(struct net_device
*);
462 void (*complete
)(struct net_device
*);
463 u32 (*get_priv_flags
)(struct net_device
*);
464 int (*set_priv_flags
)(struct net_device
*, u32
);
465 int (*get_sset_count
)(struct net_device
*, int);
466 int (*get_rxnfc
)(struct net_device
*,
467 struct ethtool_rxnfc
*, u32
*rule_locs
);
468 int (*set_rxnfc
)(struct net_device
*, struct ethtool_rxnfc
*);
469 int (*flash_device
)(struct net_device
*, struct ethtool_flash
*);
470 int (*reset
)(struct net_device
*, u32
*);
471 u32 (*get_rxfh_key_size
)(struct net_device
*);
472 u32 (*get_rxfh_indir_size
)(struct net_device
*);
473 int (*get_rxfh
)(struct net_device
*, u32
*indir
, u8
*key
,
475 int (*set_rxfh
)(struct net_device
*, const u32
*indir
,
476 const u8
*key
, const u8 hfunc
);
477 int (*get_rxfh_context
)(struct net_device
*, u32
*indir
, u8
*key
,
478 u8
*hfunc
, u32 rss_context
);
479 int (*set_rxfh_context
)(struct net_device
*, const u32
*indir
,
480 const u8
*key
, const u8 hfunc
,
481 u32
*rss_context
, bool delete);
482 void (*get_channels
)(struct net_device
*, struct ethtool_channels
*);
483 int (*set_channels
)(struct net_device
*, struct ethtool_channels
*);
484 int (*get_dump_flag
)(struct net_device
*, struct ethtool_dump
*);
485 int (*get_dump_data
)(struct net_device
*,
486 struct ethtool_dump
*, void *);
487 int (*set_dump
)(struct net_device
*, struct ethtool_dump
*);
488 int (*get_ts_info
)(struct net_device
*, struct ethtool_ts_info
*);
489 int (*get_module_info
)(struct net_device
*,
490 struct ethtool_modinfo
*);
491 int (*get_module_eeprom
)(struct net_device
*,
492 struct ethtool_eeprom
*, u8
*);
493 int (*get_eee
)(struct net_device
*, struct ethtool_eee
*);
494 int (*set_eee
)(struct net_device
*, struct ethtool_eee
*);
495 int (*get_tunable
)(struct net_device
*,
496 const struct ethtool_tunable
*, void *);
497 int (*set_tunable
)(struct net_device
*,
498 const struct ethtool_tunable
*, const void *);
499 int (*get_per_queue_coalesce
)(struct net_device
*, u32
,
500 struct ethtool_coalesce
*);
501 int (*set_per_queue_coalesce
)(struct net_device
*, u32
,
502 struct ethtool_coalesce
*);
503 int (*get_link_ksettings
)(struct net_device
*,
504 struct ethtool_link_ksettings
*);
505 int (*set_link_ksettings
)(struct net_device
*,
506 const struct ethtool_link_ksettings
*);
507 int (*get_fecparam
)(struct net_device
*,
508 struct ethtool_fecparam
*);
509 int (*set_fecparam
)(struct net_device
*,
510 struct ethtool_fecparam
*);
511 void (*get_ethtool_phy_stats
)(struct net_device
*,
512 struct ethtool_stats
*, u64
*);
513 int (*get_phy_tunable
)(struct net_device
*,
514 const struct ethtool_tunable
*, void *);
515 int (*set_phy_tunable
)(struct net_device
*,
516 const struct ethtool_tunable
*, const void *);
519 int ethtool_check_ops(const struct ethtool_ops
*ops
);
521 struct ethtool_rx_flow_rule
{
522 struct flow_rule
*rule
;
523 unsigned long priv
[];
526 struct ethtool_rx_flow_spec_input
{
527 const struct ethtool_rx_flow_spec
*fs
;
531 struct ethtool_rx_flow_rule
*
532 ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input
*input
);
533 void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule
*rule
);
535 bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings
*cmd
);
536 int ethtool_virtdev_set_link_ksettings(struct net_device
*dev
,
537 const struct ethtool_link_ksettings
*cmd
,
538 u32
*dev_speed
, u8
*dev_duplex
);
540 struct netlink_ext_ack
;
542 struct phy_tdr_config
;
545 * struct ethtool_phy_ops - Optional PHY device options
546 * @get_sset_count: Get number of strings that @get_strings will write.
547 * @get_strings: Return a set of strings that describe the requested objects
548 * @get_stats: Return extended statistics about the PHY device.
549 * @start_cable_test - Start a cable test
550 * @start_cable_test_tdr - Start a Time Domain Reflectometry cable test
552 * All operations are optional (i.e. the function pointer may be set to %NULL)
553 * and callers must take this into account. Callers must hold the RTNL lock.
555 struct ethtool_phy_ops
{
556 int (*get_sset_count
)(struct phy_device
*dev
);
557 int (*get_strings
)(struct phy_device
*dev
, u8
*data
);
558 int (*get_stats
)(struct phy_device
*dev
,
559 struct ethtool_stats
*stats
, u64
*data
);
560 int (*start_cable_test
)(struct phy_device
*phydev
,
561 struct netlink_ext_ack
*extack
);
562 int (*start_cable_test_tdr
)(struct phy_device
*phydev
,
563 struct netlink_ext_ack
*extack
,
564 const struct phy_tdr_config
*config
);
568 * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton
569 * @ops: Ethtool PHY operations to set
571 void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops
*ops
);
573 #endif /* _LINUX_ETHTOOL_H */