include/linux/ethtool.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * ethtool.h: Defines for Linux ethtool.
   4  *
   5  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
   6  * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
   7  * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
   8  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
   9  *                                christopher.leech@intel.com,
  10  *                                scott.feldman@intel.com)
  11  * Portions Copyright (C) Sun Microsystems 2008
  12  */
  13 #ifndef _LINUX_ETHTOOL_H
  14 #define _LINUX_ETHTOOL_H
  15
  16 #include <linux/bitmap.h>
  17 #include <linux/compat.h>
  18 #include <uapi/linux/ethtool.h>
  19
  20 #ifdef CONFIG_COMPAT
  21
  22 struct compat_ethtool_rx_flow_spec {
  23         u32             flow_type;
  24         union ethtool_flow_union h_u;
  25         struct ethtool_flow_ext h_ext;
  26         union ethtool_flow_union m_u;
  27         struct ethtool_flow_ext m_ext;
  28         compat_u64      ring_cookie;
  29         u32             location;
  30 };
  31
  32 struct compat_ethtool_rxnfc {
  33         u32                             cmd;
  34         u32                             flow_type;
  35         compat_u64                      data;
  36         struct compat_ethtool_rx_flow_spec fs;
  37         u32                             rule_cnt;
  38         u32                             rule_locs[0];
  39 };
  40
  41 #endif /* CONFIG_COMPAT */
  42
  43 #include <linux/rculist.h>
  44
  45 /**
  46  * enum ethtool_phys_id_state - indicator state for physical identification
  47  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
  48  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
  49  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
  50  *      is not supported)
  51  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
  52  *      is not supported)
  53  */
  54 enum ethtool_phys_id_state {
  55         ETHTOOL_ID_INACTIVE,
  56         ETHTOOL_ID_ACTIVE,
  57         ETHTOOL_ID_ON,
  58         ETHTOOL_ID_OFF
  59 };
  60
  61 enum {
  62         ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
  63         ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
  64         ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
  65
  66         /*
  67          * Add your fresh new hash function bits above and remember to update
  68          * rss_hash_func_strings[] in ethtool.c
  69          */
  70         ETH_RSS_HASH_FUNCS_COUNT
  71 };
  72
  73 #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
  74 #define __ETH_RSS_HASH(name)    __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
  75
  76 #define ETH_RSS_HASH_TOP        __ETH_RSS_HASH(TOP)
  77 #define ETH_RSS_HASH_XOR        __ETH_RSS_HASH(XOR)
  78 #define ETH_RSS_HASH_CRC32      __ETH_RSS_HASH(CRC32)
  79
  80 #define ETH_RSS_HASH_UNKNOWN    0
  81 #define ETH_RSS_HASH_NO_CHANGE  0
  82
  83 struct net_device;
  84
  85 /* Some generic methods drivers may use in their ethtool_ops */
  86 u32 ethtool_op_get_link(struct net_device *dev);
  87 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
  88
  89 /**
  90  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
  91  * @index: Index in RX flow hash indirection table
  92  * @n_rx_rings: Number of RX rings to use
  93  *
  94  * This function provides the default policy for RX flow hash indirection.
  95  */
  96 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  97 {
  98         return index % n_rx_rings;
  99 }
 100
 101 /* number of link mode bits/ulongs handled internally by kernel */
 102 #define __ETHTOOL_LINK_MODE_MASK_NBITS                  \
 103         (__ETHTOOL_LINK_MODE_LAST + 1)
 104
 105 /* declare a link mode bitmap */
 106 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)          \
 107         DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
 108
 109 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
 110  * fields, but they are allowed to overwrite them (will be ignored).
 111  */
 112 struct ethtool_link_ksettings {
 113         struct ethtool_link_settings base;
 114         struct {
 115                 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
 116                 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
 117                 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
 118         } link_modes;
 119 };
 120
 121 /**
 122  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
 123  *   @ptr : pointer to struct ethtool_link_ksettings
 124  *   @name : one of supported/advertising/lp_advertising
 125  */
 126 #define ethtool_link_ksettings_zero_link_mode(ptr, name)                \
 127         bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
 128
 129 /**
 130  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
 131  * link mode mask
 132  *   @ptr : pointer to struct ethtool_link_ksettings
 133  *   @name : one of supported/advertising/lp_advertising
 134  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 135  * (not atomic, no bound checking)
 136  */
 137 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)           \
 138         __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 139
 140 /**
 141  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
 142  * link mode mask
 143  *   @ptr : pointer to struct ethtool_link_ksettings
 144  *   @name : one of supported/advertising/lp_advertising
 145  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 146  * (not atomic, no bound checking)
 147  */
 148 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)           \
 149         __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 150
 151 /**
 152  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
 153  *   @ptr : pointer to struct ethtool_link_ksettings
 154  *   @name : one of supported/advertising/lp_advertising
 155  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 156  * (not atomic, no bound checking)
 157  *
 158  * Returns true/false.
 159  */
 160 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)          \
 161         test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 162
 163 extern int
 164 __ethtool_get_link_ksettings(struct net_device *dev,
 165                              struct ethtool_link_ksettings *link_ksettings);
 166
 167 /**
 168  * ethtool_intersect_link_masks - Given two link masks, AND them together
 169  * @dst: first mask and where result is stored
 170  * @src: second mask to intersect with
 171  *
 172  * Given two link mode masks, AND them together and save the result in dst.
 173  */
 174 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
 175                                   struct ethtool_link_ksettings *src);
 176
 177 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
 178                                              u32 legacy_u32);
 179
 180 /* return false if src had higher bits set. lower bits always updated. */
 181 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 182                                      const unsigned long *src);
 183
 184 /**
 185  * struct ethtool_ops - optional netdev operations
 186  * @get_settings: DEPRECATED, use %get_link_ksettings/%set_link_ksettings
 187  *      API. Get various device settings including Ethernet link
 188  *      settings. The @cmd parameter is expected to have been cleared
 189  *      before get_settings is called. Returns a negative error code
 190  *      or zero.
 191  * @set_settings: DEPRECATED, use %get_link_ksettings/%set_link_ksettings
 192  *      API. Set various device settings including Ethernet link
 193  *      settings.  Returns a negative error code or zero.
 194  * @get_drvinfo: Report driver/device information.  Should only set the
 195  *      @driver, @version, @fw_version and @bus_info fields.  If not
 196  *      implemented, the @driver and @bus_info fields will be filled in
 197  *      according to the netdev's parent device.
 198  * @get_regs_len: Get buffer length required for @get_regs
 199  * @get_regs: Get device registers
 200  * @get_wol: Report whether Wake-on-Lan is enabled
 201  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
 202  *      or zero.
 203  * @get_msglevel: Report driver message level.  This should be the value
 204  *      of the @msg_enable field used by netif logging functions.
 205  * @set_msglevel: Set driver message level
 206  * @nway_reset: Restart autonegotiation.  Returns a negative error code
 207  *      or zero.
 208  * @get_link: Report whether physical link is up.  Will only be called if
 209  *      the netdev is up.  Should usually be set to ethtool_op_get_link(),
 210  *      which uses netif_carrier_ok().
 211  * @get_eeprom: Read data from the device EEPROM.
 212  *      Should fill in the magic field.  Don't need to check len for zero
 213  *      or wraparound.  Fill in the data argument with the eeprom values
 214  *      from offset to offset + len.  Update len to the amount read.
 215  *      Returns an error or zero.
 216  * @set_eeprom: Write data to the device EEPROM.
 217  *      Should validate the magic field.  Don't need to check len for zero
 218  *      or wraparound.  Update len to the amount written.  Returns an error
 219  *      or zero.
 220  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
 221  *      error code or zero.
 222  * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
 223  *      error code or zero.
 224  * @get_ringparam: Report ring sizes
 225  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
 226  * @get_pauseparam: Report pause parameters
 227  * @set_pauseparam: Set pause parameters.  Returns a negative error code
 228  *      or zero.
 229  * @self_test: Run specified self-tests
 230  * @get_strings: Return a set of strings that describe the requested objects
 231  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
 232  *      attached to it.  The implementation may update the indicator
 233  *      asynchronously or synchronously, but in either case it must return
 234  *      quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
 235  *      and must either activate asynchronous updates and return zero, return
 236  *      a negative error or return a positive frequency for synchronous
 237  *      indication (e.g. 1 for one on/off cycle per second).  If it returns
 238  *      a frequency then it will be called again at intervals with the
 239  *      argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
 240  *      the indicator accordingly.  Finally, it is called with the argument
 241  *      %ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
 242  *      negative error code or zero.
 243  * @get_ethtool_stats: Return extended statistics about the device.
 244  *      This is only useful if the device maintains statistics not
 245  *      included in &struct rtnl_link_stats64.
 246  * @begin: Function to be called before any other operation.  Returns a
 247  *      negative error code or zero.
 248  * @complete: Function to be called after any other operation except
 249  *      @begin.  Will be called even if the other operation failed.
 250  * @get_priv_flags: Report driver-specific feature flags.
 251  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
 252  *      error code or zero.
 253  * @get_sset_count: Get number of strings that @get_strings will write.
 254  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
 255  *      error code or zero.
 256  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
 257  *      error code or zero.
 258  * @flash_device: Write a firmware image to device's flash memory.
 259  *      Returns a negative error code or zero.
 260  * @reset: Reset (part of) the device, as specified by a bitmask of
 261  *      flags from &enum ethtool_reset_flags.  Returns a negative
 262  *      error code or zero.
 263  * @get_rxfh_key_size: Get the size of the RX flow hash key.
 264  *      Returns zero if not supported for this specific device.
 265  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
 266  *      Returns zero if not supported for this specific device.
 267  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
 268  *      and/or hash function.
 269  *      Returns a negative error code or zero.
 270  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
 271  *      key, and/or hash function.  Arguments which are set to %NULL or zero
 272  *      will remain unchanged.
 273  *      Returns a negative error code or zero. An error code must be returned
 274  *      if at least one unsupported change was requested.
 275  * @get_channels: Get number of channels.
 276  * @set_channels: Set number of channels.  Returns a negative error code or
 277  *      zero.
 278  * @get_dump_flag: Get dump flag indicating current dump length, version,
 279  *                 and flag of the device.
 280  * @get_dump_data: Get dump data.
 281  * @set_dump: Set dump specific flags to the device.
 282  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
 283  *      Drivers supporting transmit time stamps in software should set this to
 284  *      ethtool_op_get_ts_info().
 285  * @get_module_info: Get the size and type of the eeprom contained within
 286  *      a plug-in module.
 287  * @get_module_eeprom: Get the eeprom information from the plug-in module
 288  * @get_eee: Get Energy-Efficient (EEE) supported and status.
 289  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
 290  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
 291  *      It must check that the given queue number is valid. If neither a RX nor
 292  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
 293  *      queue has this number, set the inapplicable fields to ~0 and return 0.
 294  *      Returns a negative error code or zero.
 295  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
 296  *      It must check that the given queue number is valid. If neither a RX nor
 297  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
 298  *      queue has this number, ignore the inapplicable fields.
 299  *      Returns a negative error code or zero.
 300  * @get_link_ksettings: When defined, takes precedence over the
 301  *      %get_settings method. Get various device settings
 302  *      including Ethernet link settings. The %cmd and
 303  *      %link_mode_masks_nwords fields should be ignored (use
 304  *      %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter), any
 305  *      change to them will be overwritten by kernel. Returns a
 306  *      negative error code or zero.
 307  * @set_link_ksettings: When defined, takes precedence over the
 308  *      %set_settings method. Set various device settings including
 309  *      Ethernet link settings. The %cmd and %link_mode_masks_nwords
 310  *      fields should be ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS
 311  *      instead of the latter), any change to them will be overwritten
 312  *      by kernel. Returns a negative error code or zero.
 313  * @get_fecparam: Get the network device Forward Error Correction parameters.
 314  * @set_fecparam: Set the network device Forward Error Correction parameters.
 315  *
 316  * All operations are optional (i.e. the function pointer may be set
 317  * to %NULL) and callers must take this into account.  Callers must
 318  * hold the RTNL lock.
 319  *
 320  * See the structures used by these operations for further documentation.
 321  * Note that for all operations using a structure ending with a zero-
 322  * length array, the array is allocated separately in the kernel and
 323  * is passed to the driver as an additional parameter.
 324  *
 325  * See &struct net_device and &struct net_device_ops for documentation
 326  * of the generic netdev features interface.
 327  */
 328 struct ethtool_ops {
 329         int     (*get_settings)(struct net_device *, struct ethtool_cmd *);
 330         int     (*set_settings)(struct net_device *, struct ethtool_cmd *);
 331         void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
 332         int     (*get_regs_len)(struct net_device *);
 333         void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
 334         void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
 335         int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
 336         u32     (*get_msglevel)(struct net_device *);
 337         void    (*set_msglevel)(struct net_device *, u32);
 338         int     (*nway_reset)(struct net_device *);
 339         u32     (*get_link)(struct net_device *);
 340         int     (*get_eeprom_len)(struct net_device *);
 341         int     (*get_eeprom)(struct net_device *,
 342                               struct ethtool_eeprom *, u8 *);
 343         int     (*set_eeprom)(struct net_device *,
 344                               struct ethtool_eeprom *, u8 *);
 345         int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
 346         int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
 347         void    (*get_ringparam)(struct net_device *,
 348                                  struct ethtool_ringparam *);
 349         int     (*set_ringparam)(struct net_device *,
 350                                  struct ethtool_ringparam *);
 351         void    (*get_pauseparam)(struct net_device *,
 352                                   struct ethtool_pauseparam*);
 353         int     (*set_pauseparam)(struct net_device *,
 354                                   struct ethtool_pauseparam*);
 355         void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 356         void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
 357         int     (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
 358         void    (*get_ethtool_stats)(struct net_device *,
 359                                      struct ethtool_stats *, u64 *);
 360         int     (*begin)(struct net_device *);
 361         void    (*complete)(struct net_device *);
 362         u32     (*get_priv_flags)(struct net_device *);
 363         int     (*set_priv_flags)(struct net_device *, u32);
 364         int     (*get_sset_count)(struct net_device *, int);
 365         int     (*get_rxnfc)(struct net_device *,
 366                              struct ethtool_rxnfc *, u32 *rule_locs);
 367         int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 368         int     (*flash_device)(struct net_device *, struct ethtool_flash *);
 369         int     (*reset)(struct net_device *, u32 *);
 370         u32     (*get_rxfh_key_size)(struct net_device *);
 371         u32     (*get_rxfh_indir_size)(struct net_device *);
 372         int     (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
 373                             u8 *hfunc);
 374         int     (*set_rxfh)(struct net_device *, const u32 *indir,
 375                             const u8 *key, const u8 hfunc);
 376         void    (*get_channels)(struct net_device *, struct ethtool_channels *);
 377         int     (*set_channels)(struct net_device *, struct ethtool_channels *);
 378         int     (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
 379         int     (*get_dump_data)(struct net_device *,
 380                                  struct ethtool_dump *, void *);
 381         int     (*set_dump)(struct net_device *, struct ethtool_dump *);
 382         int     (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
 383         int     (*get_module_info)(struct net_device *,
 384                                    struct ethtool_modinfo *);
 385         int     (*get_module_eeprom)(struct net_device *,
 386                                      struct ethtool_eeprom *, u8 *);
 387         int     (*get_eee)(struct net_device *, struct ethtool_eee *);
 388         int     (*set_eee)(struct net_device *, struct ethtool_eee *);
 389         int     (*get_tunable)(struct net_device *,
 390                                const struct ethtool_tunable *, void *);
 391         int     (*set_tunable)(struct net_device *,
 392                                const struct ethtool_tunable *, const void *);
 393         int     (*get_per_queue_coalesce)(struct net_device *, u32,
 394                                           struct ethtool_coalesce *);
 395         int     (*set_per_queue_coalesce)(struct net_device *, u32,
 396                                           struct ethtool_coalesce *);
 397         int     (*get_link_ksettings)(struct net_device *,
 398                                       struct ethtool_link_ksettings *);
 399         int     (*set_link_ksettings)(struct net_device *,
 400                                       const struct ethtool_link_ksettings *);
 401         int     (*get_fecparam)(struct net_device *,
 402                                       struct ethtool_fecparam *);
 403         int     (*set_fecparam)(struct net_device *,
 404                                       struct ethtool_fecparam *);
 405 };
 406 #endif /* _LINUX_ETHTOOL_H */