mm: relocate 'write_protect_seq' in struct mm_struct

[mirror_ubuntu-jammy-kernel.git] / include / linux / ftrace.h

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Ftrace header.  For implementation details beyond the random comments
 * scattered below, see: Documentation/trace/ftrace-design.rst
 */

#ifndef _LINUX_FTRACE_H
#define _LINUX_FTRACE_H

#include <linux/trace_recursion.h>
#include <linux/trace_clock.h>
#include <linux/kallsyms.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
#include <linux/ptrace.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/fs.h>

#include <asm/ftrace.h>

/*
 * If the arch supports passing the variable contents of
 * function_trace_op as the third parameter back from the
 * mcount call, then the arch should define this as 1.
 */
#ifndef ARCH_SUPPORTS_FTRACE_OPS
#define ARCH_SUPPORTS_FTRACE_OPS 0
#endif

/*
 * If the arch's mcount caller does not support all of ftrace's
 * features, then it must call an indirect function that
 * does. Or at least does enough to prevent any unwelcome side effects.
 */
#if !ARCH_SUPPORTS_FTRACE_OPS
# define FTRACE_FORCE_LIST_FUNC 1
#else
# define FTRACE_FORCE_LIST_FUNC 0
#endif

/* Main tracing buffer and events set up */
#ifdef CONFIG_TRACING
void trace_init(void);
void early_trace_init(void);
#else
static inline void trace_init(void) { }
static inline void early_trace_init(void) { }
#endif

struct module;
struct ftrace_hash;
struct ftrace_direct_func;

#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_MODULES) && \
        defined(CONFIG_DYNAMIC_FTRACE)
const char *
ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
                   unsigned long *off, char **modname, char *sym);
#else
static inline const char *
ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
                   unsigned long *off, char **modname, char *sym)
{
        return NULL;
}
#endif

#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_DYNAMIC_FTRACE)
int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
                           char *type, char *name,
                           char *module_name, int *exported);
#else
static inline int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
                                         char *type, char *name,
                                         char *module_name, int *exported)
{
        return -1;
}
#endif

#ifdef CONFIG_FUNCTION_TRACER

extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
                     void *buffer, size_t *lenp, loff_t *ppos);

struct ftrace_ops;

#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS

struct ftrace_regs {
        struct pt_regs          regs;
};
#define arch_ftrace_get_regs(fregs) (&(fregs)->regs)

/*
 * ftrace_instruction_pointer_set() is to be defined by the architecture
 * if to allow setting of the instruction pointer from the ftrace_regs
 * when HAVE_DYNAMIC_FTRACE_WITH_ARGS is set and it supports
 * live kernel patching.
 */
#define ftrace_instruction_pointer_set(fregs, ip) do { } while (0)
#endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */

static __always_inline struct pt_regs *ftrace_get_regs(struct ftrace_regs *fregs)
{
        if (!fregs)
                return NULL;

        return arch_ftrace_get_regs(fregs);
}

typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
                              struct ftrace_ops *op, struct ftrace_regs *fregs);

ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);

/*
 * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
 * set in the flags member.
 * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION, STUB and
 * IPMODIFY are a kind of attribute flags which can be set only before
 * registering the ftrace_ops, and can not be modified while registered.
 * Changing those attribute flags after registering ftrace_ops will
 * cause unexpected results.
 *
 * ENABLED - set/unset when ftrace_ops is registered/unregistered
 * DYNAMIC - set when ftrace_ops is registered to denote dynamically
 *           allocated ftrace_ops which need special care
 * SAVE_REGS - The ftrace_ops wants regs saved at each function called
 *            and passed to the callback. If this flag is set, but the
 *            architecture does not support passing regs
 *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
 *            ftrace_ops will fail to register, unless the next flag
 *            is set.
 * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
 *            handler can handle an arch that does not save regs
 *            (the handler tests if regs == NULL), then it can set
 *            this flag instead. It will not fail registering the ftrace_ops
 *            but, the regs field will be NULL if the arch does not support
 *            passing regs to the handler.
 *            Note, if this flag is set, the SAVE_REGS flag will automatically
 *            get set upon registering the ftrace_ops, if the arch supports it.
 * RECURSION - The ftrace_ops can set this to tell the ftrace infrastructure
 *            that the call back needs recursion protection. If it does
 *            not set this, then the ftrace infrastructure will assume
 *            that the callback can handle recursion on its own.
 * STUB   - The ftrace_ops is just a place holder.
 * INITIALIZED - The ftrace_ops has already been initialized (first use time
 *            register_ftrace_function() is called, it will initialized the ops)
 * DELETED - The ops are being deleted, do not let them be registered again.
 * ADDING  - The ops is in the process of being added.
 * REMOVING - The ops is in the process of being removed.
 * MODIFYING - The ops is in the process of changing its filter functions.
 * ALLOC_TRAMP - A dynamic trampoline was allocated by the core code.
 *            The arch specific code sets this flag when it allocated a
 *            trampoline. This lets the arch know that it can update the
 *            trampoline in case the callback function changes.
 *            The ftrace_ops trampoline can be set by the ftrace users, and
 *            in such cases the arch must not modify it. Only the arch ftrace
 *            core code should set this flag.
 * IPMODIFY - The ops can modify the IP register. This can only be set with
 *            SAVE_REGS. If another ops with this flag set is already registered
 *            for any of the functions that this ops will be registered for, then
 *            this ops will fail to register or set_filter_ip.
 * PID     - Is affected by set_ftrace_pid (allows filtering on those pids)
 * RCU     - Set when the ops can only be called when RCU is watching.
 * TRACE_ARRAY - The ops->private points to a trace_array descriptor.
 * PERMANENT - Set when the ops is permanent and should not be affected by
 *             ftrace_enabled.
 * DIRECT - Used by the direct ftrace_ops helper for direct functions
 *            (internal ftrace only, should not be used by others)
 */
enum {
        FTRACE_OPS_FL_ENABLED                   = BIT(0),
        FTRACE_OPS_FL_DYNAMIC                   = BIT(1),
        FTRACE_OPS_FL_SAVE_REGS                 = BIT(2),
        FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED    = BIT(3),
        FTRACE_OPS_FL_RECURSION                 = BIT(4),
        FTRACE_OPS_FL_STUB                      = BIT(5),
        FTRACE_OPS_FL_INITIALIZED               = BIT(6),
        FTRACE_OPS_FL_DELETED                   = BIT(7),
        FTRACE_OPS_FL_ADDING                    = BIT(8),
        FTRACE_OPS_FL_REMOVING                  = BIT(9),
        FTRACE_OPS_FL_MODIFYING                 = BIT(10),
        FTRACE_OPS_FL_ALLOC_TRAMP               = BIT(11),
        FTRACE_OPS_FL_IPMODIFY                  = BIT(12),
        FTRACE_OPS_FL_PID                       = BIT(13),
        FTRACE_OPS_FL_RCU                       = BIT(14),
        FTRACE_OPS_FL_TRACE_ARRAY               = BIT(15),
        FTRACE_OPS_FL_PERMANENT                 = BIT(16),
        FTRACE_OPS_FL_DIRECT                    = BIT(17),
};

#ifdef CONFIG_DYNAMIC_FTRACE
/* The hash used to know what functions callbacks trace */
struct ftrace_ops_hash {
        struct ftrace_hash __rcu        *notrace_hash;
        struct ftrace_hash __rcu        *filter_hash;
        struct mutex                    regex_lock;
};

void ftrace_free_init_mem(void);
void ftrace_free_mem(struct module *mod, void *start, void *end);
#else
static inline void ftrace_free_init_mem(void) { }
static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
#endif

/*
 * Note, ftrace_ops can be referenced outside of RCU protection, unless
 * the RCU flag is set. If ftrace_ops is allocated and not part of kernel
 * core data, the unregistering of it will perform a scheduling on all CPUs
 * to make sure that there are no more users. Depending on the load of the
 * system that may take a bit of time.
 *
 * Any private data added must also take care not to be freed and if private
 * data is added to a ftrace_ops that is in core code, the user of the
 * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
 */
struct ftrace_ops {
        ftrace_func_t                   func;
        struct ftrace_ops __rcu         *next;
        unsigned long                   flags;
        void                            *private;
        ftrace_func_t                   saved_func;
#ifdef CONFIG_DYNAMIC_FTRACE
        struct ftrace_ops_hash          local_hash;
        struct ftrace_ops_hash          *func_hash;
        struct ftrace_ops_hash          old_hash;
        unsigned long                   trampoline;
        unsigned long                   trampoline_size;
        struct list_head                list;
#endif
};

extern struct ftrace_ops __rcu *ftrace_ops_list;
extern struct ftrace_ops ftrace_list_end;

/*
 * Traverse the ftrace_ops_list, invoking all entries.  The reason that we
 * can use rcu_dereference_raw_check() is that elements removed from this list
 * are simply leaked, so there is no need to interact with a grace-period
 * mechanism.  The rcu_dereference_raw_check() calls are needed to handle
 * concurrent insertions into the ftrace_ops_list.
 *
 * Silly Alpha and silly pointer-speculation compiler optimizations!
 */
#define do_for_each_ftrace_op(op, list)                 \
        op = rcu_dereference_raw_check(list);                   \
        do

/*
 * Optimized for just a single item in the list (as that is the normal case).
 */
#define while_for_each_ftrace_op(op)                            \
        while (likely(op = rcu_dereference_raw_check((op)->next)) &&    \
               unlikely((op) != &ftrace_list_end))

/*
 * Type of the current tracing.
 */
enum ftrace_tracing_type_t {
        FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
        FTRACE_TYPE_RETURN,     /* Hook the return of the function */
};

/* Current tracing type, default is FTRACE_TYPE_ENTER */
extern enum ftrace_tracing_type_t ftrace_tracing_type;

/*
 * The ftrace_ops must be a static and should also
 * be read_mostly.  These functions do modify read_mostly variables
 * so use them sparely. Never free an ftrace_op or modify the
 * next pointer after it has been registered. Even after unregistering
 * it, the next pointer may still be used internally.
 */
int register_ftrace_function(struct ftrace_ops *ops);
int unregister_ftrace_function(struct ftrace_ops *ops);

extern void ftrace_stub(unsigned long a0, unsigned long a1,
                        struct ftrace_ops *op, struct ftrace_regs *fregs);

#else /* !CONFIG_FUNCTION_TRACER */
/*
 * (un)register_ftrace_function must be a macro since the ops parameter
 * must not be evaluated.
 */
#define register_ftrace_function(ops) ({ 0; })
#define unregister_ftrace_function(ops) ({ 0; })
static inline void ftrace_kill(void) { }
static inline void ftrace_free_init_mem(void) { }
static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
#endif /* CONFIG_FUNCTION_TRACER */

struct ftrace_func_entry {
        struct hlist_node hlist;
        unsigned long ip;
        unsigned long direct; /* for direct lookup only */
};

struct dyn_ftrace;

#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
extern int ftrace_direct_func_count;
int register_ftrace_direct(unsigned long ip, unsigned long addr);
int unregister_ftrace_direct(unsigned long ip, unsigned long addr);
int modify_ftrace_direct(unsigned long ip, unsigned long old_addr, unsigned long new_addr);
struct ftrace_direct_func *ftrace_find_direct_func(unsigned long addr);
int ftrace_modify_direct_caller(struct ftrace_func_entry *entry,
                                struct dyn_ftrace *rec,
                                unsigned long old_addr,
                                unsigned long new_addr);
unsigned long ftrace_find_rec_direct(unsigned long ip);
#else
# define ftrace_direct_func_count 0
static inline int register_ftrace_direct(unsigned long ip, unsigned long addr)
{
        return -ENOTSUPP;
}
static inline int unregister_ftrace_direct(unsigned long ip, unsigned long addr)
{
        return -ENOTSUPP;
}
static inline int modify_ftrace_direct(unsigned long ip,
                                       unsigned long old_addr, unsigned long new_addr)
{
        return -ENOTSUPP;
}
static inline struct ftrace_direct_func *ftrace_find_direct_func(unsigned long addr)
{
        return NULL;
}
static inline int ftrace_modify_direct_caller(struct ftrace_func_entry *entry,
                                              struct dyn_ftrace *rec,
                                              unsigned long old_addr,
                                              unsigned long new_addr)
{
        return -ENODEV;
}
static inline unsigned long ftrace_find_rec_direct(unsigned long ip)
{
        return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */

#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
/*
 * This must be implemented by the architecture.
 * It is the way the ftrace direct_ops helper, when called
 * via ftrace (because there's other callbacks besides the
 * direct call), can inform the architecture's trampoline that this
 * routine has a direct caller, and what the caller is.
 *
 * For example, in x86, it returns the direct caller
 * callback function via the regs->orig_ax parameter.
 * Then in the ftrace trampoline, if this is set, it makes
 * the return from the trampoline jump to the direct caller
 * instead of going back to the function it just traced.
 */
static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs,
                                                 unsigned long addr) { }
#endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */

#ifdef CONFIG_STACK_TRACER

extern int stack_tracer_enabled;

int stack_trace_sysctl(struct ctl_table *table, int write, void *buffer,
                       size_t *lenp, loff_t *ppos);

/* DO NOT MODIFY THIS VARIABLE DIRECTLY! */
DECLARE_PER_CPU(int, disable_stack_tracer);

/**
 * stack_tracer_disable - temporarily disable the stack tracer
 *
 * There's a few locations (namely in RCU) where stack tracing
 * cannot be executed. This function is used to disable stack
 * tracing during those critical sections.
 *
 * This function must be called with preemption or interrupts
 * disabled and stack_tracer_enable() must be called shortly after
 * while preemption or interrupts are still disabled.
 */
static inline void stack_tracer_disable(void)
{
        /* Preemption or interrupts must be disabled */
        if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
                WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
        this_cpu_inc(disable_stack_tracer);
}

/**
 * stack_tracer_enable - re-enable the stack tracer
 *
 * After stack_tracer_disable() is called, stack_tracer_enable()
 * must be called shortly afterward.
 */
static inline void stack_tracer_enable(void)
{
        if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
                WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
        this_cpu_dec(disable_stack_tracer);
}
#else
static inline void stack_tracer_disable(void) { }
static inline void stack_tracer_enable(void) { }
#endif

#ifdef CONFIG_DYNAMIC_FTRACE

int ftrace_arch_code_modify_prepare(void);
int ftrace_arch_code_modify_post_process(void);

enum ftrace_bug_type {
        FTRACE_BUG_UNKNOWN,
        FTRACE_BUG_INIT,
        FTRACE_BUG_NOP,
        FTRACE_BUG_CALL,
        FTRACE_BUG_UPDATE,
};
extern enum ftrace_bug_type ftrace_bug_type;

/*
 * Archs can set this to point to a variable that holds the value that was
 * expected at the call site before calling ftrace_bug().
 */
extern const void *ftrace_expected;

void ftrace_bug(int err, struct dyn_ftrace *rec);

struct seq_file;

extern int ftrace_text_reserved(const void *start, const void *end);

struct ftrace_ops *ftrace_ops_trampoline(unsigned long addr);

bool is_ftrace_trampoline(unsigned long addr);

/*
 * The dyn_ftrace record's flags field is split into two parts.
 * the first part which is '0-FTRACE_REF_MAX' is a counter of
 * the number of callbacks that have registered the function that
 * the dyn_ftrace descriptor represents.
 *
 * The second part is a mask:
 *  ENABLED - the function is being traced
 *  REGS    - the record wants the function to save regs
 *  REGS_EN - the function is set up to save regs.
 *  IPMODIFY - the record allows for the IP address to be changed.
 *  DISABLED - the record is not ready to be touched yet
 *  DIRECT   - there is a direct function to call
 *
 * When a new ftrace_ops is registered and wants a function to save
 * pt_regs, the rec->flags REGS is set. When the function has been
 * set up to save regs, the REG_EN flag is set. Once a function
 * starts saving regs it will do so until all ftrace_ops are removed
 * from tracing that function.
 */
enum {
        FTRACE_FL_ENABLED       = (1UL << 31),
        FTRACE_FL_REGS          = (1UL << 30),
        FTRACE_FL_REGS_EN       = (1UL << 29),
        FTRACE_FL_TRAMP         = (1UL << 28),
        FTRACE_FL_TRAMP_EN      = (1UL << 27),
        FTRACE_FL_IPMODIFY      = (1UL << 26),
        FTRACE_FL_DISABLED      = (1UL << 25),
        FTRACE_FL_DIRECT        = (1UL << 24),
        FTRACE_FL_DIRECT_EN     = (1UL << 23),
};

#define FTRACE_REF_MAX_SHIFT    23
#define FTRACE_REF_MAX          ((1UL << FTRACE_REF_MAX_SHIFT) - 1)

#define ftrace_rec_count(rec)   ((rec)->flags & FTRACE_REF_MAX)

struct dyn_ftrace {
        unsigned long           ip; /* address of mcount call-site */
        unsigned long           flags;
        struct dyn_arch_ftrace  arch;
};

int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
                         int remove, int reset);
int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
                       int len, int reset);
int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
                        int len, int reset);
void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
void ftrace_free_filter(struct ftrace_ops *ops);
void ftrace_ops_set_global_filter(struct ftrace_ops *ops);

enum {
        FTRACE_UPDATE_CALLS             = (1 << 0),
        FTRACE_DISABLE_CALLS            = (1 << 1),
        FTRACE_UPDATE_TRACE_FUNC        = (1 << 2),
        FTRACE_START_FUNC_RET           = (1 << 3),
        FTRACE_STOP_FUNC_RET            = (1 << 4),
        FTRACE_MAY_SLEEP                = (1 << 5),
};

/*
 * The FTRACE_UPDATE_* enum is used to pass information back
 * from the ftrace_update_record() and ftrace_test_record()
 * functions. These are called by the code update routines
 * to find out what is to be done for a given function.
 *
 *  IGNORE           - The function is already what we want it to be
 *  MAKE_CALL        - Start tracing the function
 *  MODIFY_CALL      - Stop saving regs for the function
 *  MAKE_NOP         - Stop tracing the function
 */
enum {
        FTRACE_UPDATE_IGNORE,
        FTRACE_UPDATE_MAKE_CALL,
        FTRACE_UPDATE_MODIFY_CALL,
        FTRACE_UPDATE_MAKE_NOP,
};

enum {
        FTRACE_ITER_FILTER      = (1 << 0),
        FTRACE_ITER_NOTRACE     = (1 << 1),
        FTRACE_ITER_PRINTALL    = (1 << 2),
        FTRACE_ITER_DO_PROBES   = (1 << 3),
        FTRACE_ITER_PROBE       = (1 << 4),
        FTRACE_ITER_MOD         = (1 << 5),
        FTRACE_ITER_ENABLED     = (1 << 6),
};

void arch_ftrace_update_code(int command);
void arch_ftrace_update_trampoline(struct ftrace_ops *ops);
void *arch_ftrace_trampoline_func(struct ftrace_ops *ops, struct dyn_ftrace *rec);
void arch_ftrace_trampoline_free(struct ftrace_ops *ops);

struct ftrace_rec_iter;

struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);

#define for_ftrace_rec_iter(iter)               \
        for (iter = ftrace_rec_iter_start();    \
             iter;                              \
             iter = ftrace_rec_iter_next(iter))


int ftrace_update_record(struct dyn_ftrace *rec, bool enable);
int ftrace_test_record(struct dyn_ftrace *rec, bool enable);
void ftrace_run_stop_machine(int command);
unsigned long ftrace_location(unsigned long ip);
unsigned long ftrace_location_range(unsigned long start, unsigned long end);
unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);

extern ftrace_func_t ftrace_trace_function;

int ftrace_regex_open(struct ftrace_ops *ops, int flag,
                  struct inode *inode, struct file *file);
ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
                            size_t cnt, loff_t *ppos);
ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
                             size_t cnt, loff_t *ppos);
int ftrace_regex_release(struct inode *inode, struct file *file);

void __init
ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);

/* defined in arch */
extern int ftrace_ip_converted(unsigned long ip);
extern int ftrace_dyn_arch_init(void);
extern void ftrace_replace_code(int enable);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
extern void ftrace_regs_caller(void);
extern void ftrace_call(void);
extern void ftrace_regs_call(void);
extern void mcount_call(void);

void ftrace_modify_all_code(int command);

#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif

#ifndef FTRACE_GRAPH_ADDR
#define FTRACE_GRAPH_ADDR ((unsigned long)ftrace_graph_caller)
#endif

#ifndef FTRACE_REGS_ADDR
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
#else
# define FTRACE_REGS_ADDR FTRACE_ADDR
#endif
#endif

/*
 * If an arch would like functions that are only traced
 * by the function graph tracer to jump directly to its own
 * trampoline, then they can define FTRACE_GRAPH_TRAMP_ADDR
 * to be that address to jump to.
 */
#ifndef FTRACE_GRAPH_TRAMP_ADDR
#define FTRACE_GRAPH_TRAMP_ADDR ((unsigned long) 0)
#endif

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
extern int ftrace_enable_ftrace_graph_caller(void);
extern int ftrace_disable_ftrace_graph_caller(void);
#else
static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
#endif

/**
 * ftrace_make_nop - convert code into nop
 * @mod: module structure if called by module load initialization
 * @rec: the call site record (e.g. mcount/fentry)
 * @addr: the address that the call site should be calling
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a caller to @addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_make_nop(struct module *mod,
                           struct dyn_ftrace *rec, unsigned long addr);


/**
 * ftrace_init_nop - initialize a nop call site
 * @mod: module structure if called by module load initialization
 * @rec: the call site record (e.g. mcount/fentry)
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should contain the contents created by
 * the compiler
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
#ifndef ftrace_init_nop
static inline int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
{
        return ftrace_make_nop(mod, rec, MCOUNT_ADDR);
}
#endif

/**
 * ftrace_make_call - convert a nop call site into a call to addr
 * @rec: the call site record (e.g. mcount/fentry)
 * @addr: the address that the call site should call
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a nop
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);

#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
/**
 * ftrace_modify_call - convert from one addr to another (no nop)
 * @rec: the call site record (e.g. mcount/fentry)
 * @old_addr: the address expected to be currently called to
 * @addr: the address to change to
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a caller to @old_addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
                              unsigned long addr);
#else
/* Should never be called */
static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
                                     unsigned long addr)
{
        return -EINVAL;
}
#endif

/* May be defined in arch */
extern int ftrace_arch_read_dyn_info(char *buf, int size);

extern int skip_trace(unsigned long ip);
extern void ftrace_module_init(struct module *mod);
extern void ftrace_module_enable(struct module *mod);
extern void ftrace_release_mod(struct module *mod);

extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
#else /* CONFIG_DYNAMIC_FTRACE */
static inline int skip_trace(unsigned long ip) { return 0; }
static inline void ftrace_disable_daemon(void) { }
static inline void ftrace_enable_daemon(void) { }
static inline void ftrace_module_init(struct module *mod) { }
static inline void ftrace_module_enable(struct module *mod) { }
static inline void ftrace_release_mod(struct module *mod) { }
static inline int ftrace_text_reserved(const void *start, const void *end)
{
        return 0;
}
static inline unsigned long ftrace_location(unsigned long ip)
{
        return 0;
}

/*
 * Again users of functions that have ftrace_ops may not
 * have them defined when ftrace is not enabled, but these
 * functions may still be called. Use a macro instead of inline.
 */
#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_free_filter(ops) do { } while (0)
#define ftrace_ops_set_global_filter(ops) do { } while (0)

static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
                            size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
                             size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline int
ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }

static inline bool is_ftrace_trampoline(unsigned long addr)
{
        return false;
}
#endif /* CONFIG_DYNAMIC_FTRACE */

/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);

static inline void tracer_disable(void)
{
#ifdef CONFIG_FUNCTION_TRACER
        ftrace_enabled = 0;
#endif
}

/*
 * Ftrace disable/restore without lock. Some synchronization mechanism
 * must be used to prevent ftrace_enabled to be changed between
 * disable/restore.
 */
static inline int __ftrace_enabled_save(void)
{
#ifdef CONFIG_FUNCTION_TRACER
        int saved_ftrace_enabled = ftrace_enabled;
        ftrace_enabled = 0;
        return saved_ftrace_enabled;
#else
        return 0;
#endif
}

static inline void __ftrace_enabled_restore(int enabled)
{
#ifdef CONFIG_FUNCTION_TRACER
        ftrace_enabled = enabled;
#endif
}

/* All archs should have this, but we define it for consistency */
#ifndef ftrace_return_address0
# define ftrace_return_address0 __builtin_return_address(0)
#endif

/* Archs may use other ways for ADDR1 and beyond */
#ifndef ftrace_return_address
# ifdef CONFIG_FRAME_POINTER
#  define ftrace_return_address(n) __builtin_return_address(n)
# else
#  define ftrace_return_address(n) 0UL
# endif
#endif

#define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
#define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
#define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
#define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
#define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
#define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
#define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))

static inline unsigned long get_lock_parent_ip(void)
{
        unsigned long addr = CALLER_ADDR0;

        if (!in_lock_functions(addr))
                return addr;
        addr = CALLER_ADDR1;
        if (!in_lock_functions(addr))
                return addr;
        return CALLER_ADDR2;
}

#ifdef CONFIG_TRACE_PREEMPT_TOGGLE
  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
#else
/*
 * Use defines instead of static inlines because some arches will make code out
 * of the CALLER_ADDR, when we really want these to be a real nop.
 */
# define trace_preempt_on(a0, a1) do { } while (0)
# define trace_preempt_off(a0, a1) do { } while (0)
#endif

#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
#ifdef CC_USING_PATCHABLE_FUNCTION_ENTRY
#define FTRACE_CALLSITE_SECTION "__patchable_function_entries"
#else
#define FTRACE_CALLSITE_SECTION "__mcount_loc"
#endif
#else
static inline void ftrace_init(void) { }
#endif

/*
 * Structure that defines an entry function trace.
 * It's already packed but the attribute "packed" is needed
 * to remove extra padding at the end.
 */
struct ftrace_graph_ent {
        unsigned long func; /* Current function */
        int depth;
} __packed;

/*
 * Structure that defines a return function trace.
 * It's already packed but the attribute "packed" is needed
 * to remove extra padding at the end.
 */
struct ftrace_graph_ret {
        unsigned long func; /* Current function */
        int depth;
        /* Number of functions that overran the depth limit for current task */
        unsigned int overrun;
        unsigned long long calltime;
        unsigned long long rettime;
} __packed;

/* Type of the callback handlers for tracing function graph*/
typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */

extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);

#ifdef CONFIG_FUNCTION_GRAPH_TRACER

struct fgraph_ops {
        trace_func_graph_ent_t          entryfunc;
        trace_func_graph_ret_t          retfunc;
};

/*
 * Stack of return addresses for functions
 * of a thread.
 * Used in struct thread_info
 */
struct ftrace_ret_stack {
        unsigned long ret;
        unsigned long func;
        unsigned long long calltime;
#ifdef CONFIG_FUNCTION_PROFILER
        unsigned long long subtime;
#endif
#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
        unsigned long fp;
#endif
#ifdef HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
        unsigned long *retp;
#endif
};

/*
 * Primary handler of a function return.
 * It relays on ftrace_return_to_handler.
 * Defined in entry_32/64.S
 */
extern void return_to_handler(void);

extern int
function_graph_enter(unsigned long ret, unsigned long func,
                     unsigned long frame_pointer, unsigned long *retp);

struct ftrace_ret_stack *
ftrace_graph_get_ret_stack(struct task_struct *task, int idx);

unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
                                    unsigned long ret, unsigned long *retp);

/*
 * Sometimes we don't want to trace a function with the function
 * graph tracer but we want them to keep traced by the usual function
 * tracer if the function graph tracer is not configured.
 */
#define __notrace_funcgraph             notrace

#define FTRACE_RETFUNC_DEPTH 50
#define FTRACE_RETSTACK_ALLOC_SIZE 32

extern int register_ftrace_graph(struct fgraph_ops *ops);
extern void unregister_ftrace_graph(struct fgraph_ops *ops);

extern bool ftrace_graph_is_dead(void);
extern void ftrace_graph_stop(void);

/* The current handlers in use */
extern trace_func_graph_ret_t ftrace_graph_return;
extern trace_func_graph_ent_t ftrace_graph_entry;

extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);

static inline void pause_graph_tracing(void)
{
        atomic_inc(&current->tracing_graph_pause);
}

static inline void unpause_graph_tracing(void)
{
        atomic_dec(&current->tracing_graph_pause);
}
#else /* !CONFIG_FUNCTION_GRAPH_TRACER */

#define __notrace_funcgraph

static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }

/* Define as macros as fgraph_ops may not be defined */
#define register_ftrace_graph(ops) ({ -1; })
#define unregister_ftrace_graph(ops) do { } while (0)

static inline unsigned long
ftrace_graph_ret_addr(struct task_struct *task, int *idx, unsigned long ret,
                      unsigned long *retp)
{
        return ret;
}

static inline void pause_graph_tracing(void) { }
static inline void unpause_graph_tracing(void) { }
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

#ifdef CONFIG_TRACING

/* flags for current->trace */
enum {
        TSK_TRACE_FL_TRACE_BIT  = 0,
        TSK_TRACE_FL_GRAPH_BIT  = 1,
};
enum {
        TSK_TRACE_FL_TRACE      = 1 << TSK_TRACE_FL_TRACE_BIT,
        TSK_TRACE_FL_GRAPH      = 1 << TSK_TRACE_FL_GRAPH_BIT,
};

static inline void set_tsk_trace_trace(struct task_struct *tsk)
{
        set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}

static inline void clear_tsk_trace_trace(struct task_struct *tsk)
{
        clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}

static inline int test_tsk_trace_trace(struct task_struct *tsk)
{
        return tsk->trace & TSK_TRACE_FL_TRACE;
}

static inline void set_tsk_trace_graph(struct task_struct *tsk)
{
        set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}

static inline void clear_tsk_trace_graph(struct task_struct *tsk)
{
        clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}

static inline int test_tsk_trace_graph(struct task_struct *tsk)
{
        return tsk->trace & TSK_TRACE_FL_GRAPH;
}

enum ftrace_dump_mode;

extern enum ftrace_dump_mode ftrace_dump_on_oops;
extern int tracepoint_printk;

extern void disable_trace_on_warning(void);
extern int __disable_trace_on_warning;

int tracepoint_printk_sysctl(struct ctl_table *table, int write,
                             void *buffer, size_t *lenp, loff_t *ppos);

#else /* CONFIG_TRACING */
static inline void  disable_trace_on_warning(void) { }
#endif /* CONFIG_TRACING */

#ifdef CONFIG_FTRACE_SYSCALLS

unsigned long arch_syscall_addr(int nr);

#endif /* CONFIG_FTRACE_SYSCALLS */

#endif /* _LINUX_FTRACE_H */