include/linux/gpio/driver.h

   1 #ifndef __LINUX_GPIO_DRIVER_H
   2 #define __LINUX_GPIO_DRIVER_H
   3
   4 #include <linux/types.h>
   5 #include <linux/module.h>
   6 #include <linux/irq.h>
   7 #include <linux/irqchip/chained_irq.h>
   8 #include <linux/irqdomain.h>
   9
  10 struct device;
  11 struct gpio_desc;
  12 struct of_phandle_args;
  13 struct device_node;
  14 struct seq_file;
  15
  16 #ifdef CONFIG_GPIOLIB
  17
  18 /**
  19  * struct gpio_chip - abstract a GPIO controller
  20  * @label: for diagnostics
  21  * @dev: optional device providing the GPIOs
  22  * @owner: helps prevent removal of modules exporting active GPIOs
  23  * @list: links gpio_chips together for traversal
  24  * @request: optional hook for chip-specific activation, such as
  25  *      enabling module power and clock; may sleep
  26  * @free: optional hook for chip-specific deactivation, such as
  27  *      disabling module power and clock; may sleep
  28  * @get_direction: returns direction for signal "offset", 0=out, 1=in,
  29  *      (same as GPIOF_DIR_XXX), or negative error
  30  * @direction_input: configures signal "offset" as input, or returns error
  31  * @direction_output: configures signal "offset" as output, or returns error
  32  * @get: returns value for signal "offset"; for output signals this
  33  *      returns either the value actually sensed, or zero
  34  * @set: assigns output value for signal "offset"
  35  * @set_debounce: optional hook for setting debounce time for specified gpio in
  36  *      interrupt triggered gpio chips
  37  * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
  38  *      implementation may not sleep
  39  * @dbg_show: optional routine to show contents in debugfs; default code
  40  *      will be used when this is omitted, but custom code can show extra
  41  *      state (such as pullup/pulldown configuration).
  42  * @base: identifies the first GPIO number handled by this chip; or, if
  43  *      negative during registration, requests dynamic ID allocation.
  44  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
  45  *      handled is (base + ngpio - 1).
  46  * @desc: array of ngpio descriptors. Private.
  47  * @names: if set, must be an array of strings to use as alternative
  48  *      names for the GPIOs in this chip. Any entry in the array
  49  *      may be NULL if there is no alias for the GPIO, however the
  50  *      array must be @ngpio entries long.  A name can include a single printk
  51  *      format specifier for an unsigned int.  It is substituted by the actual
  52  *      number of the gpio.
  53  * @can_sleep: flag must be set iff get()/set() methods sleep, as they
  54  *      must while accessing GPIO expander chips over I2C or SPI
  55  * @exported: flags if the gpiochip is exported for use from sysfs. Private.
  56  *
  57  * A gpio_chip can help platforms abstract various sources of GPIOs so
  58  * they can all be accessed through a common programing interface.
  59  * Example sources would be SOC controllers, FPGAs, multifunction
  60  * chips, dedicated GPIO expanders, and so on.
  61  *
  62  * Each chip controls a number of signals, identified in method calls
  63  * by "offset" values in the range 0..(@ngpio - 1).  When those signals
  64  * are referenced through calls like gpio_get_value(gpio), the offset
  65  * is calculated by subtracting @base from the gpio number.
  66  */
  67 struct gpio_chip {
  68         const char              *label;
  69         struct device           *dev;
  70         struct module           *owner;
  71         struct list_head        list;
  72
  73         int                     (*request)(struct gpio_chip *chip,
  74                                                 unsigned offset);
  75         void                    (*free)(struct gpio_chip *chip,
  76                                                 unsigned offset);
  77         int                     (*get_direction)(struct gpio_chip *chip,
  78                                                 unsigned offset);
  79         int                     (*direction_input)(struct gpio_chip *chip,
  80                                                 unsigned offset);
  81         int                     (*direction_output)(struct gpio_chip *chip,
  82                                                 unsigned offset, int value);
  83         int                     (*get)(struct gpio_chip *chip,
  84                                                 unsigned offset);
  85         void                    (*set)(struct gpio_chip *chip,
  86                                                 unsigned offset, int value);
  87         int                     (*set_debounce)(struct gpio_chip *chip,
  88                                                 unsigned offset,
  89                                                 unsigned debounce);
  90
  91         int                     (*to_irq)(struct gpio_chip *chip,
  92                                                 unsigned offset);
  93
  94         void                    (*dbg_show)(struct seq_file *s,
  95                                                 struct gpio_chip *chip);
  96         int                     base;
  97         u16                     ngpio;
  98         struct gpio_desc        *desc;
  99         const char              *const *names;
 100         bool                    can_sleep;
 101         bool                    exported;
 102
 103 #ifdef CONFIG_GPIOLIB_IRQCHIP
 104         /*
 105          * With CONFIG_GPIO_IRQCHIP we get an irqchip inside the gpiolib
 106          * to handle IRQs for most practical cases.
 107          */
 108         struct irq_chip         *irqchip;
 109         struct irq_domain       *irqdomain;
 110         unsigned int            irq_base;
 111         irq_flow_handler_t      irq_handler;
 112         unsigned int            irq_default_type;
 113 #endif
 114
 115 #if defined(CONFIG_OF_GPIO)
 116         /*
 117          * If CONFIG_OF is enabled, then all GPIO controllers described in the
 118          * device tree automatically may have an OF translation
 119          */
 120         struct device_node *of_node;
 121         int of_gpio_n_cells;
 122         int (*of_xlate)(struct gpio_chip *gc,
 123                         const struct of_phandle_args *gpiospec, u32 *flags);
 124 #endif
 125 #ifdef CONFIG_PINCTRL
 126         /*
 127          * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally
 128          * describe the actual pin range which they serve in an SoC. This
 129          * information would be used by pinctrl subsystem to configure
 130          * corresponding pins for gpio usage.
 131          */
 132         struct list_head pin_ranges;
 133 #endif
 134 };
 135
 136 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
 137                         unsigned offset);
 138
 139 /* add/remove chips */
 140 extern int gpiochip_add(struct gpio_chip *chip);
 141 extern int __must_check gpiochip_remove(struct gpio_chip *chip);
 142 extern struct gpio_chip *gpiochip_find(void *data,
 143                               int (*match)(struct gpio_chip *chip, void *data));
 144
 145 /* lock/unlock as IRQ */
 146 int gpiod_lock_as_irq(struct gpio_desc *desc);
 147 void gpiod_unlock_as_irq(struct gpio_desc *desc);
 148
 149 struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc);
 150
 151 struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
 152                                     u16 hwnum);
 153
 154 enum gpio_lookup_flags {
 155         GPIO_ACTIVE_HIGH = (0 << 0),
 156         GPIO_ACTIVE_LOW = (1 << 0),
 157         GPIO_OPEN_DRAIN = (1 << 1),
 158         GPIO_OPEN_SOURCE = (1 << 2),
 159 };
 160
 161 /**
 162  * struct gpiod_lookup - lookup table
 163  * @chip_label: name of the chip the GPIO belongs to
 164  * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
 165  * @con_id: name of the GPIO from the device's point of view
 166  * @idx: index of the GPIO in case several GPIOs share the same name
 167  * @flags: mask of GPIO_* values
 168  *
 169  * gpiod_lookup is a lookup table for associating GPIOs to specific devices and
 170  * functions using platform data.
 171  */
 172 struct gpiod_lookup {
 173         const char *chip_label;
 174         u16 chip_hwnum;
 175         const char *con_id;
 176         unsigned int idx;
 177         enum gpio_lookup_flags flags;
 178 };
 179
 180 struct gpiod_lookup_table {
 181         struct list_head list;
 182         const char *dev_id;
 183         struct gpiod_lookup table[];
 184 };
 185
 186 /*
 187  * Simple definition of a single GPIO under a con_id
 188  */
 189 #define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
 190         GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
 191
 192 /*
 193  * Use this macro if you need to have several GPIOs under the same con_id.
 194  * Each GPIO needs to use a different index and can be accessed using
 195  * gpiod_get_index()
 196  */
 197 #define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags)  \
 198 {                                                                         \
 199         .chip_label = _chip_label,                                        \
 200         .chip_hwnum = _chip_hwnum,                                        \
 201         .con_id = _con_id,                                                \
 202         .idx = _idx,                                                      \
 203         .flags = _flags,                                                  \
 204 }
 205
 206 void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
 207
 208 #ifdef CONFIG_GPIOLIB_IRQCHIP
 209
 210 void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 211                 struct irq_chip *irqchip,
 212                 int parent_irq,
 213                 irq_flow_handler_t parent_handler);
 214
 215 int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 216                 struct irq_chip *irqchip,
 217                 unsigned int first_irq,
 218                 irq_flow_handler_t handler,
 219                 unsigned int type);
 220
 221 #endif /* CONFIG_GPIO_IRQCHIP */
 222
 223 #else /* CONFIG_GPIOLIB */
 224
 225 static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 226 {
 227         /* GPIO can never have been requested */
 228         WARN_ON(1);
 229         return ERR_PTR(-ENODEV);
 230 }
 231
 232 #endif /* CONFIG_GPIOLIB */
 233
 234 #endif