include/linux/i2c-algo-pca.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef _LINUX_I2C_ALGO_PCA_H
   3 #define _LINUX_I2C_ALGO_PCA_H
   4
   5 /* Chips known to the pca algo */
   6 #define I2C_PCA_CHIP_9564       0x00
   7 #define I2C_PCA_CHIP_9665       0x01
   8
   9 /* Internal period for PCA9665 oscilator */
  10 #define I2C_PCA_OSC_PER         3 /* e10-8s */
  11
  12 /* Clock speeds for the bus for PCA9564*/
  13 #define I2C_PCA_CON_330kHz      0x00
  14 #define I2C_PCA_CON_288kHz      0x01
  15 #define I2C_PCA_CON_217kHz      0x02
  16 #define I2C_PCA_CON_146kHz      0x03
  17 #define I2C_PCA_CON_88kHz       0x04
  18 #define I2C_PCA_CON_59kHz       0x05
  19 #define I2C_PCA_CON_44kHz       0x06
  20 #define I2C_PCA_CON_36kHz       0x07
  21
  22 /* PCA9564 registers */
  23 #define I2C_PCA_STA             0x00 /* STATUS  Read Only  */
  24 #define I2C_PCA_TO              0x00 /* TIMEOUT Write Only */
  25 #define I2C_PCA_DAT             0x01 /* DATA    Read/Write */
  26 #define I2C_PCA_ADR             0x02 /* OWN ADR Read/Write */
  27 #define I2C_PCA_CON             0x03 /* CONTROL Read/Write */
  28
  29 /* PCA9665 registers */
  30 #define I2C_PCA_INDPTR          0x00 /* INDIRECT Pointer Write Only */
  31 #define I2C_PCA_IND             0x02 /* INDIRECT Read/Write */
  32
  33 /* PCA9665 indirect registers */
  34 #define I2C_PCA_ICOUNT          0x00 /* Byte Count for buffered mode */
  35 #define I2C_PCA_IADR            0x01 /* OWN ADR */
  36 #define I2C_PCA_ISCLL           0x02 /* SCL LOW period */
  37 #define I2C_PCA_ISCLH           0x03 /* SCL HIGH period */
  38 #define I2C_PCA_ITO             0x04 /* TIMEOUT */
  39 #define I2C_PCA_IPRESET         0x05 /* Parallel bus reset */
  40 #define I2C_PCA_IMODE           0x06 /* I2C Bus mode */
  41
  42 /* PCA9665 I2C bus mode */
  43 #define I2C_PCA_MODE_STD        0x00 /* Standard mode */
  44 #define I2C_PCA_MODE_FAST       0x01 /* Fast mode */
  45 #define I2C_PCA_MODE_FASTP      0x02 /* Fast Plus mode */
  46 #define I2C_PCA_MODE_TURBO      0x03 /* Turbo mode */
  47
  48
  49 #define I2C_PCA_CON_AA          0x80 /* Assert Acknowledge */
  50 #define I2C_PCA_CON_ENSIO       0x40 /* Enable */
  51 #define I2C_PCA_CON_STA         0x20 /* Start */
  52 #define I2C_PCA_CON_STO         0x10 /* Stop */
  53 #define I2C_PCA_CON_SI          0x08 /* Serial Interrupt */
  54 #define I2C_PCA_CON_CR          0x07 /* Clock Rate (MASK) */
  55
  56 struct i2c_algo_pca_data {
  57         void                            *data;  /* private low level data */
  58         void (*write_byte)              (void *data, int reg, int val);
  59         int  (*read_byte)               (void *data, int reg);
  60         int  (*wait_for_completion)     (void *data);
  61         void (*reset_chip)              (void *data);
  62         /* For PCA9564, use one of the predefined frequencies:
  63          * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000
  64          * For PCA9665, use the frequency you want here. */
  65         unsigned int                    i2c_clock;
  66         unsigned int                    chip;
  67 };
  68
  69 int i2c_pca_add_bus(struct i2c_adapter *);
  70 int i2c_pca_add_numbered_bus(struct i2c_adapter *);
  71
  72 #endif /* _LINUX_I2C_ALGO_PCA_H */