1 /* ------------------------------------------------------------------------- */
3 /* i2c.h - definitions for the i2c-bus interface */
5 /* ------------------------------------------------------------------------- */
6 /* Copyright (C) 1995-2000 Simon G. Vogl
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
22 /* ------------------------------------------------------------------------- */
24 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
25 Frodo Looijaard <frodol@dds.nl> */
29 #include <linux/mod_devicetable.h>
30 #include <linux/device.h> /* for struct device */
31 #include <linux/sched.h> /* for completion */
32 #include <linux/mutex.h>
33 #include <linux/rtmutex.h>
34 #include <linux/irqdomain.h> /* for Host Notify IRQ */
35 #include <linux/of.h> /* for struct device_node */
36 #include <linux/swab.h> /* for swab16 */
37 #include <uapi/linux/i2c.h>
39 extern struct bus_type i2c_bus_type
;
40 extern struct device_type i2c_adapter_type
;
41 extern struct device_type i2c_client_type
;
43 /* --- General options ------------------------------------------------ */
51 struct i2c_board_info
;
53 typedef int (*i2c_slave_cb_t
)(struct i2c_client
*, enum i2c_slave_event
, u8
*);
56 struct property_entry
;
58 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
60 * The master routines are the ones normally used to transmit data to devices
61 * on a bus (or read from them). Apart from two basic transfer functions to
62 * transmit one message at a time, a more complex version can be used to
63 * transmit an arbitrary number of messages without interruption.
64 * @count must be be less than 64k since msg.len is u16.
66 extern int i2c_master_send(const struct i2c_client
*client
, const char *buf
,
68 extern int i2c_master_recv(const struct i2c_client
*client
, char *buf
,
71 /* Transfer num messages.
73 extern int i2c_transfer(struct i2c_adapter
*adap
, struct i2c_msg
*msgs
,
76 extern int __i2c_transfer(struct i2c_adapter
*adap
, struct i2c_msg
*msgs
,
79 /* This is the very generalized SMBus access routine. You probably do not
80 want to use this, though; one of the functions below may be much easier,
81 and probably just as fast.
82 Note that we use i2c_adapter here, because you do not need a specific
83 smbus adapter to call this function. */
84 extern s32
i2c_smbus_xfer(struct i2c_adapter
*adapter
, u16 addr
,
85 unsigned short flags
, char read_write
, u8 command
,
86 int size
, union i2c_smbus_data
*data
);
88 /* Now follow the 'nice' access routines. These also document the calling
89 conventions of i2c_smbus_xfer. */
91 extern s32
i2c_smbus_read_byte(const struct i2c_client
*client
);
92 extern s32
i2c_smbus_write_byte(const struct i2c_client
*client
, u8 value
);
93 extern s32
i2c_smbus_read_byte_data(const struct i2c_client
*client
,
95 extern s32
i2c_smbus_write_byte_data(const struct i2c_client
*client
,
96 u8 command
, u8 value
);
97 extern s32
i2c_smbus_read_word_data(const struct i2c_client
*client
,
99 extern s32
i2c_smbus_write_word_data(const struct i2c_client
*client
,
100 u8 command
, u16 value
);
103 i2c_smbus_read_word_swapped(const struct i2c_client
*client
, u8 command
)
105 s32 value
= i2c_smbus_read_word_data(client
, command
);
107 return (value
< 0) ? value
: swab16(value
);
111 i2c_smbus_write_word_swapped(const struct i2c_client
*client
,
112 u8 command
, u16 value
)
114 return i2c_smbus_write_word_data(client
, command
, swab16(value
));
117 /* Returns the number of read bytes */
118 extern s32
i2c_smbus_read_block_data(const struct i2c_client
*client
,
119 u8 command
, u8
*values
);
120 extern s32
i2c_smbus_write_block_data(const struct i2c_client
*client
,
121 u8 command
, u8 length
, const u8
*values
);
122 /* Returns the number of read bytes */
123 extern s32
i2c_smbus_read_i2c_block_data(const struct i2c_client
*client
,
124 u8 command
, u8 length
, u8
*values
);
125 extern s32
i2c_smbus_write_i2c_block_data(const struct i2c_client
*client
,
126 u8 command
, u8 length
,
129 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client
*client
,
130 u8 command
, u8 length
, u8
*values
);
133 enum i2c_alert_protocol
{
134 I2C_PROTOCOL_SMBUS_ALERT
,
135 I2C_PROTOCOL_SMBUS_HOST_NOTIFY
,
139 * struct i2c_driver - represent an I2C device driver
140 * @class: What kind of i2c device we instantiate (for detect)
141 * @attach_adapter: Callback for bus addition (deprecated)
142 * @probe: Callback for device binding - soon to be deprecated
143 * @probe_new: New callback for device binding
144 * @remove: Callback for device unbinding
145 * @shutdown: Callback for device shutdown
146 * @alert: Alert callback, for example for the SMBus alert protocol
147 * @command: Callback for bus-wide signaling (optional)
148 * @driver: Device driver model driver
149 * @id_table: List of I2C devices supported by this driver
150 * @detect: Callback for device detection
151 * @address_list: The I2C addresses to probe (for detect)
152 * @clients: List of detected clients we created (for i2c-core use only)
153 * @disable_i2c_core_irq_mapping: Tell the i2c-core to not do irq-mapping
155 * The driver.owner field should be set to the module owner of this driver.
156 * The driver.name field should be set to the name of this driver.
158 * For automatic device detection, both @detect and @address_list must
159 * be defined. @class should also be set, otherwise only devices forced
160 * with module parameters will be created. The detect function must
161 * fill at least the name field of the i2c_board_info structure it is
162 * handed upon successful detection, and possibly also the flags field.
164 * If @detect is missing, the driver will still work fine for enumerated
165 * devices. Detected devices simply won't be supported. This is expected
166 * for the many I2C/SMBus devices which can't be detected reliably, and
167 * the ones which can always be enumerated in practice.
169 * The i2c_client structure which is handed to the @detect callback is
170 * not a real i2c_client. It is initialized just enough so that you can
171 * call i2c_smbus_read_byte_data and friends on it. Don't do anything
172 * else with it. In particular, calling dev_dbg and friends on it is
178 /* Notifies the driver that a new bus has appeared. You should avoid
179 * using this, it will be removed in a near future.
181 int (*attach_adapter
)(struct i2c_adapter
*) __deprecated
;
183 /* Standard driver model interfaces */
184 int (*probe
)(struct i2c_client
*, const struct i2c_device_id
*);
185 int (*remove
)(struct i2c_client
*);
187 /* New driver model interface to aid the seamless removal of the
188 * current probe()'s, more commonly unused than used second parameter.
190 int (*probe_new
)(struct i2c_client
*);
192 /* driver model interfaces that don't relate to enumeration */
193 void (*shutdown
)(struct i2c_client
*);
195 /* Alert callback, for example for the SMBus alert protocol.
196 * The format and meaning of the data value depends on the protocol.
197 * For the SMBus alert protocol, there is a single bit of data passed
198 * as the alert response's low bit ("event flag").
199 * For the SMBus Host Notify protocol, the data corresponds to the
200 * 16-bit payload data reported by the slave device acting as master.
202 void (*alert
)(struct i2c_client
*, enum i2c_alert_protocol protocol
,
205 /* a ioctl like command that can be used to perform specific functions
208 int (*command
)(struct i2c_client
*client
, unsigned int cmd
, void *arg
);
210 struct device_driver driver
;
211 const struct i2c_device_id
*id_table
;
213 /* Device detection callback for automatic device creation */
214 int (*detect
)(struct i2c_client
*, struct i2c_board_info
*);
215 const unsigned short *address_list
;
216 struct list_head clients
;
218 bool disable_i2c_core_irq_mapping
;
220 #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
223 * struct i2c_client - represent an I2C slave device
224 * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
225 * I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
226 * @addr: Address used on the I2C bus connected to the parent adapter.
227 * @name: Indicates the type of the device, usually a chip name that's
228 * generic enough to hide second-sourcing and compatible revisions.
229 * @adapter: manages the bus segment hosting this I2C device
230 * @dev: Driver model device node for the slave.
231 * @irq: indicates the IRQ generated by this device (if any)
232 * @detected: member of an i2c_driver.clients list or i2c-core's
233 * userspace_devices list
234 * @slave_cb: Callback when I2C slave mode of an adapter is used. The adapter
235 * calls it to pass on slave events to the slave driver.
237 * An i2c_client identifies a single device (i.e. chip) connected to an
238 * i2c bus. The behaviour exposed to Linux is defined by the driver
239 * managing the device.
242 unsigned short flags
; /* div., see below */
243 unsigned short addr
; /* chip address - NOTE: 7bit */
244 /* addresses are stored in the */
246 char name
[I2C_NAME_SIZE
];
247 struct i2c_adapter
*adapter
; /* the adapter we sit on */
248 struct device dev
; /* the device structure */
249 int irq
; /* irq issued by device */
250 struct list_head detected
;
251 #if IS_ENABLED(CONFIG_I2C_SLAVE)
252 i2c_slave_cb_t slave_cb
; /* callback for slave mode */
255 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
257 extern struct i2c_client
*i2c_verify_client(struct device
*dev
);
258 extern struct i2c_adapter
*i2c_verify_adapter(struct device
*dev
);
259 extern const struct i2c_device_id
*i2c_match_id(const struct i2c_device_id
*id
,
260 const struct i2c_client
*client
);
262 static inline struct i2c_client
*kobj_to_i2c_client(struct kobject
*kobj
)
264 struct device
* const dev
= container_of(kobj
, struct device
, kobj
);
265 return to_i2c_client(dev
);
268 static inline void *i2c_get_clientdata(const struct i2c_client
*dev
)
270 return dev_get_drvdata(&dev
->dev
);
273 static inline void i2c_set_clientdata(struct i2c_client
*dev
, void *data
)
275 dev_set_drvdata(&dev
->dev
, data
);
278 /* I2C slave support */
280 #if IS_ENABLED(CONFIG_I2C_SLAVE)
281 enum i2c_slave_event
{
282 I2C_SLAVE_READ_REQUESTED
,
283 I2C_SLAVE_WRITE_REQUESTED
,
284 I2C_SLAVE_READ_PROCESSED
,
285 I2C_SLAVE_WRITE_RECEIVED
,
289 extern int i2c_slave_register(struct i2c_client
*client
, i2c_slave_cb_t slave_cb
);
290 extern int i2c_slave_unregister(struct i2c_client
*client
);
291 extern bool i2c_detect_slave_mode(struct device
*dev
);
293 static inline int i2c_slave_event(struct i2c_client
*client
,
294 enum i2c_slave_event event
, u8
*val
)
296 return client
->slave_cb(client
, event
, val
);
301 * struct i2c_board_info - template for device creation
302 * @type: chip type, to initialize i2c_client.name
303 * @flags: to initialize i2c_client.flags
304 * @addr: stored in i2c_client.addr
305 * @platform_data: stored in i2c_client.dev.platform_data
306 * @archdata: copied into i2c_client.dev.archdata
307 * @of_node: pointer to OpenFirmware device node
308 * @fwnode: device node supplied by the platform firmware
309 * @properties: additional device properties for the device
310 * @resources: resources associated with the device
311 * @num_resources: number of resources in the @resources array
312 * @irq: stored in i2c_client.irq
314 * I2C doesn't actually support hardware probing, although controllers and
315 * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's
316 * a device at a given address. Drivers commonly need more information than
317 * that, such as chip type, configuration, associated IRQ, and so on.
319 * i2c_board_info is used to build tables of information listing I2C devices
320 * that are present. This information is used to grow the driver model tree.
321 * For mainboards this is done statically using i2c_register_board_info();
322 * bus numbers identify adapters that aren't yet available. For add-on boards,
323 * i2c_new_device() does this dynamically with the adapter already known.
325 struct i2c_board_info
{
326 char type
[I2C_NAME_SIZE
];
327 unsigned short flags
;
330 struct dev_archdata
*archdata
;
331 struct device_node
*of_node
;
332 struct fwnode_handle
*fwnode
;
333 const struct property_entry
*properties
;
334 const struct resource
*resources
;
335 unsigned int num_resources
;
340 * I2C_BOARD_INFO - macro used to list an i2c device and its address
341 * @dev_type: identifies the device type
342 * @dev_addr: the device's address on the bus.
344 * This macro initializes essential fields of a struct i2c_board_info,
345 * declaring what has been provided on a particular board. Optional
346 * fields (such as associated irq, or device-specific platform_data)
347 * are provided using conventional syntax.
349 #define I2C_BOARD_INFO(dev_type, dev_addr) \
350 .type = dev_type, .addr = (dev_addr)
353 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
354 /* Add-on boards should register/unregister their devices; e.g. a board
355 * with integrated I2C, a config eeprom, sensors, and a codec that's
356 * used in conjunction with the primary hardware.
358 extern struct i2c_client
*
359 i2c_new_device(struct i2c_adapter
*adap
, struct i2c_board_info
const *info
);
361 /* If you don't know the exact address of an I2C device, use this variant
362 * instead, which can probe for device presence in a list of possible
363 * addresses. The "probe" callback function is optional. If it is provided,
364 * it must return 1 on successful probe, 0 otherwise. If it is not provided,
365 * a default probing method is used.
367 extern struct i2c_client
*
368 i2c_new_probed_device(struct i2c_adapter
*adap
,
369 struct i2c_board_info
*info
,
370 unsigned short const *addr_list
,
371 int (*probe
)(struct i2c_adapter
*, unsigned short addr
));
373 /* Common custom probe functions */
374 extern int i2c_probe_func_quick_read(struct i2c_adapter
*, unsigned short addr
);
376 /* For devices that use several addresses, use i2c_new_dummy() to make
377 * client handles for the extra addresses.
379 extern struct i2c_client
*
380 i2c_new_dummy(struct i2c_adapter
*adap
, u16 address
);
382 extern struct i2c_client
*
383 i2c_new_secondary_device(struct i2c_client
*client
,
387 extern void i2c_unregister_device(struct i2c_client
*);
390 /* Mainboard arch_initcall() code should register all its I2C devices.
391 * This is done at arch_initcall time, before declaring any i2c adapters.
392 * Modules for add-on boards must use other calls.
394 #ifdef CONFIG_I2C_BOARDINFO
396 i2c_register_board_info(int busnum
, struct i2c_board_info
const *info
,
400 i2c_register_board_info(int busnum
, struct i2c_board_info
const *info
,
405 #endif /* I2C_BOARDINFO */
408 * struct i2c_algorithm - represent I2C transfer method
409 * @master_xfer: Issue a set of i2c transactions to the given I2C adapter
410 * defined by the msgs array, with num messages available to transfer via
411 * the adapter specified by adap.
412 * @smbus_xfer: Issue smbus transactions to the given I2C adapter. If this
413 * is not present, then the bus layer will try and convert the SMBus calls
414 * into I2C transfers instead.
415 * @functionality: Return the flags that this algorithm/adapter pair supports
416 * from the I2C_FUNC_* flags.
417 * @reg_slave: Register given client to I2C slave mode of this adapter
418 * @unreg_slave: Unregister given client from I2C slave mode of this adapter
420 * The following structs are for those who like to implement new bus drivers:
421 * i2c_algorithm is the interface to a class of hardware solutions which can
422 * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
423 * to name two of the most common.
425 * The return codes from the @master_xfer field should indicate the type of
426 * error code that occurred during the transfer, as documented in the kernel
427 * Documentation file Documentation/i2c/fault-codes.
429 struct i2c_algorithm
{
430 /* If an adapter algorithm can't do I2C-level access, set master_xfer
431 to NULL. If an adapter algorithm can do SMBus access, set
432 smbus_xfer. If set to NULL, the SMBus protocol is simulated
433 using common I2C messages */
434 /* master_xfer should return the number of messages successfully
435 processed, or a negative value on error */
436 int (*master_xfer
)(struct i2c_adapter
*adap
, struct i2c_msg
*msgs
,
438 int (*smbus_xfer
) (struct i2c_adapter
*adap
, u16 addr
,
439 unsigned short flags
, char read_write
,
440 u8 command
, int size
, union i2c_smbus_data
*data
);
442 /* To determine what the adapter supports */
443 u32 (*functionality
) (struct i2c_adapter
*);
445 #if IS_ENABLED(CONFIG_I2C_SLAVE)
446 int (*reg_slave
)(struct i2c_client
*client
);
447 int (*unreg_slave
)(struct i2c_client
*client
);
452 * struct i2c_lock_operations - represent I2C locking operations
453 * @lock_bus: Get exclusive access to an I2C bus segment
454 * @trylock_bus: Try to get exclusive access to an I2C bus segment
455 * @unlock_bus: Release exclusive access to an I2C bus segment
457 * The main operations are wrapped by i2c_lock_bus and i2c_unlock_bus.
459 struct i2c_lock_operations
{
460 void (*lock_bus
)(struct i2c_adapter
*, unsigned int flags
);
461 int (*trylock_bus
)(struct i2c_adapter
*, unsigned int flags
);
462 void (*unlock_bus
)(struct i2c_adapter
*, unsigned int flags
);
466 * struct i2c_timings - I2C timing information
467 * @bus_freq_hz: the bus frequency in Hz
468 * @scl_rise_ns: time SCL signal takes to rise in ns; t(r) in the I2C specification
469 * @scl_fall_ns: time SCL signal takes to fall in ns; t(f) in the I2C specification
470 * @scl_int_delay_ns: time IP core additionally needs to setup SCL in ns
471 * @sda_fall_ns: time SDA signal takes to fall in ns; t(f) in the I2C specification
477 u32 scl_int_delay_ns
;
482 * struct i2c_bus_recovery_info - I2C bus recovery information
483 * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or
484 * i2c_generic_scl_recovery() or i2c_generic_gpio_recovery().
485 * @get_scl: This gets current value of SCL line. Mandatory for generic SCL
486 * recovery. Used internally for generic GPIO recovery.
487 * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used
488 * internally for generic GPIO recovery.
489 * @get_sda: This gets current value of SDA line. Optional for generic SCL
490 * recovery. Used internally, if sda_gpio is a valid GPIO, for generic GPIO
492 * @prepare_recovery: This will be called before starting recovery. Platform may
493 * configure padmux here for SDA/SCL line or something else they want.
494 * @unprepare_recovery: This will be called after completing recovery. Platform
495 * may configure padmux here for SDA/SCL line or something else they want.
496 * @scl_gpio: gpio number of the SCL line. Only required for GPIO recovery.
497 * @sda_gpio: gpio number of the SDA line. Only required for GPIO recovery.
499 struct i2c_bus_recovery_info
{
500 int (*recover_bus
)(struct i2c_adapter
*);
502 int (*get_scl
)(struct i2c_adapter
*);
503 void (*set_scl
)(struct i2c_adapter
*, int val
);
504 int (*get_sda
)(struct i2c_adapter
*);
506 void (*prepare_recovery
)(struct i2c_adapter
*);
507 void (*unprepare_recovery
)(struct i2c_adapter
*);
514 int i2c_recover_bus(struct i2c_adapter
*adap
);
516 /* Generic recovery routines */
517 int i2c_generic_gpio_recovery(struct i2c_adapter
*adap
);
518 int i2c_generic_scl_recovery(struct i2c_adapter
*adap
);
521 * struct i2c_adapter_quirks - describe flaws of an i2c adapter
522 * @flags: see I2C_AQ_* for possible flags and read below
523 * @max_num_msgs: maximum number of messages per transfer
524 * @max_write_len: maximum length of a write message
525 * @max_read_len: maximum length of a read message
526 * @max_comb_1st_msg_len: maximum length of the first msg in a combined message
527 * @max_comb_2nd_msg_len: maximum length of the second msg in a combined message
529 * Note about combined messages: Some I2C controllers can only send one message
530 * per transfer, plus something called combined message or write-then-read.
531 * This is (usually) a small write message followed by a read message and
532 * barely enough to access register based devices like EEPROMs. There is a flag
533 * to support this mode. It implies max_num_msg = 2 and does the length checks
534 * with max_comb_*_len because combined message mode usually has its own
535 * limitations. Because of HW implementations, some controllers can actually do
536 * write-then-anything or other variants. To support that, write-then-read has
537 * been broken out into smaller bits like write-first and read-second which can
538 * be combined as needed.
541 struct i2c_adapter_quirks
{
546 u16 max_comb_1st_msg_len
;
547 u16 max_comb_2nd_msg_len
;
550 /* enforce max_num_msgs = 2 and use max_comb_*_len for length checks */
551 #define I2C_AQ_COMB BIT(0)
552 /* first combined message must be write */
553 #define I2C_AQ_COMB_WRITE_FIRST BIT(1)
554 /* second combined message must be read */
555 #define I2C_AQ_COMB_READ_SECOND BIT(2)
556 /* both combined messages must have the same target address */
557 #define I2C_AQ_COMB_SAME_ADDR BIT(3)
558 /* convenience macro for typical write-then read case */
559 #define I2C_AQ_COMB_WRITE_THEN_READ (I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | \
560 I2C_AQ_COMB_READ_SECOND | I2C_AQ_COMB_SAME_ADDR)
561 /* clock stretching is not supported */
562 #define I2C_AQ_NO_CLK_STRETCH BIT(4)
565 * i2c_adapter is the structure used to identify a physical i2c bus along
566 * with the access algorithms necessary to access it.
569 struct module
*owner
;
570 unsigned int class; /* classes to allow probing for */
571 const struct i2c_algorithm
*algo
; /* the algorithm to access the bus */
574 /* data fields that are valid for all devices */
575 const struct i2c_lock_operations
*lock_ops
;
576 struct rt_mutex bus_lock
;
577 struct rt_mutex mux_lock
;
579 int timeout
; /* in jiffies */
581 struct device dev
; /* the adapter device */
585 struct completion dev_released
;
587 struct mutex userspace_clients_lock
;
588 struct list_head userspace_clients
;
590 struct i2c_bus_recovery_info
*bus_recovery_info
;
591 const struct i2c_adapter_quirks
*quirks
;
593 struct irq_domain
*host_notify_domain
;
595 #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
597 static inline void *i2c_get_adapdata(const struct i2c_adapter
*dev
)
599 return dev_get_drvdata(&dev
->dev
);
602 static inline void i2c_set_adapdata(struct i2c_adapter
*dev
, void *data
)
604 dev_set_drvdata(&dev
->dev
, data
);
607 static inline struct i2c_adapter
*
608 i2c_parent_is_i2c_adapter(const struct i2c_adapter
*adapter
)
610 #if IS_ENABLED(CONFIG_I2C_MUX)
611 struct device
*parent
= adapter
->dev
.parent
;
613 if (parent
!= NULL
&& parent
->type
== &i2c_adapter_type
)
614 return to_i2c_adapter(parent
);
620 int i2c_for_each_dev(void *data
, int (*fn
)(struct device
*, void *));
622 /* Adapter locking functions, exported for shared pin cases */
623 #define I2C_LOCK_ROOT_ADAPTER BIT(0)
624 #define I2C_LOCK_SEGMENT BIT(1)
627 * i2c_lock_bus - Get exclusive access to an I2C bus segment
628 * @adapter: Target I2C bus segment
629 * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
630 * locks only this branch in the adapter tree
633 i2c_lock_bus(struct i2c_adapter
*adapter
, unsigned int flags
)
635 adapter
->lock_ops
->lock_bus(adapter
, flags
);
639 * i2c_trylock_bus - Try to get exclusive access to an I2C bus segment
640 * @adapter: Target I2C bus segment
641 * @flags: I2C_LOCK_ROOT_ADAPTER tries to locks the root i2c adapter,
642 * I2C_LOCK_SEGMENT tries to lock only this branch in the adapter tree
644 * Return: true if the I2C bus segment is locked, false otherwise
647 i2c_trylock_bus(struct i2c_adapter
*adapter
, unsigned int flags
)
649 return adapter
->lock_ops
->trylock_bus(adapter
, flags
);
653 * i2c_unlock_bus - Release exclusive access to an I2C bus segment
654 * @adapter: Target I2C bus segment
655 * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
656 * unlocks only this branch in the adapter tree
659 i2c_unlock_bus(struct i2c_adapter
*adapter
, unsigned int flags
)
661 adapter
->lock_ops
->unlock_bus(adapter
, flags
);
665 i2c_lock_adapter(struct i2c_adapter
*adapter
)
667 i2c_lock_bus(adapter
, I2C_LOCK_ROOT_ADAPTER
);
671 i2c_unlock_adapter(struct i2c_adapter
*adapter
)
673 i2c_unlock_bus(adapter
, I2C_LOCK_ROOT_ADAPTER
);
676 /*flags for the client struct: */
677 #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
678 #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
679 /* Must equal I2C_M_TEN below */
680 #define I2C_CLIENT_SLAVE 0x20 /* we are the slave */
681 #define I2C_CLIENT_HOST_NOTIFY 0x40 /* We want to use I2C host notify */
682 #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */
683 #define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */
684 /* Must match I2C_M_STOP|IGNORE_NAK */
686 /* i2c adapter classes (bitmask) */
687 #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */
688 #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */
689 #define I2C_CLASS_SPD (1<<7) /* Memory modules */
690 #define I2C_CLASS_DEPRECATED (1<<8) /* Warn users that adapter will stop using classes */
692 /* Internal numbers to terminate lists */
693 #define I2C_CLIENT_END 0xfffeU
695 /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
696 #define I2C_ADDRS(addr, addrs...) \
697 ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
700 /* ----- functions exported by i2c.o */
704 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
705 extern int i2c_add_adapter(struct i2c_adapter
*);
706 extern void i2c_del_adapter(struct i2c_adapter
*);
707 extern int i2c_add_numbered_adapter(struct i2c_adapter
*);
709 extern int i2c_register_driver(struct module
*, struct i2c_driver
*);
710 extern void i2c_del_driver(struct i2c_driver
*);
712 /* use a define to avoid include chaining to get THIS_MODULE */
713 #define i2c_add_driver(driver) \
714 i2c_register_driver(THIS_MODULE, driver)
716 extern struct i2c_client
*i2c_use_client(struct i2c_client
*client
);
717 extern void i2c_release_client(struct i2c_client
*client
);
719 /* call the i2c_client->command() of all attached clients with
720 * the given arguments */
721 extern void i2c_clients_command(struct i2c_adapter
*adap
,
722 unsigned int cmd
, void *arg
);
724 extern struct i2c_adapter
*i2c_get_adapter(int nr
);
725 extern void i2c_put_adapter(struct i2c_adapter
*adap
);
726 extern unsigned int i2c_adapter_depth(struct i2c_adapter
*adapter
);
728 void i2c_parse_fw_timings(struct device
*dev
, struct i2c_timings
*t
, bool use_defaults
);
730 /* Return the functionality mask */
731 static inline u32
i2c_get_functionality(struct i2c_adapter
*adap
)
733 return adap
->algo
->functionality(adap
);
736 /* Return 1 if adapter supports everything we need, 0 if not. */
737 static inline int i2c_check_functionality(struct i2c_adapter
*adap
, u32 func
)
739 return (func
& i2c_get_functionality(adap
)) == func
;
743 * i2c_check_quirks() - Function for checking the quirk flags in an i2c adapter
745 * @quirks: quirk flags
747 * Return: true if the adapter has all the specified quirk flags, false if not
749 static inline bool i2c_check_quirks(struct i2c_adapter
*adap
, u64 quirks
)
753 return (adap
->quirks
->flags
& quirks
) == quirks
;
756 /* Return the adapter number for a specific adapter */
757 static inline int i2c_adapter_id(struct i2c_adapter
*adap
)
762 static inline u8
i2c_8bit_addr_from_msg(const struct i2c_msg
*msg
)
764 return (msg
->addr
<< 1) | (msg
->flags
& I2C_M_RD
? 1 : 0);
767 int i2c_handle_smbus_host_notify(struct i2c_adapter
*adap
, unsigned short addr
);
769 * module_i2c_driver() - Helper macro for registering a modular I2C driver
770 * @__i2c_driver: i2c_driver struct
772 * Helper macro for I2C drivers which do not do anything special in module
773 * init/exit. This eliminates a lot of boilerplate. Each module may only
774 * use this macro once, and calling it replaces module_init() and module_exit()
776 #define module_i2c_driver(__i2c_driver) \
777 module_driver(__i2c_driver, i2c_add_driver, \
781 * builtin_i2c_driver() - Helper macro for registering a builtin I2C driver
782 * @__i2c_driver: i2c_driver struct
784 * Helper macro for I2C drivers which do not do anything special in their
785 * init. This eliminates a lot of boilerplate. Each driver may only
786 * use this macro once, and calling it replaces device_initcall().
788 #define builtin_i2c_driver(__i2c_driver) \
789 builtin_driver(__i2c_driver, i2c_add_driver)
793 #if IS_ENABLED(CONFIG_OF)
794 /* must call put_device() when done with returned i2c_client device */
795 extern struct i2c_client
*of_find_i2c_device_by_node(struct device_node
*node
);
797 /* must call put_device() when done with returned i2c_adapter device */
798 extern struct i2c_adapter
*of_find_i2c_adapter_by_node(struct device_node
*node
);
800 /* must call i2c_put_adapter() when done with returned i2c_adapter device */
801 struct i2c_adapter
*of_get_i2c_adapter_by_node(struct device_node
*node
);
803 extern const struct of_device_id
804 *i2c_of_match_device(const struct of_device_id
*matches
,
805 struct i2c_client
*client
);
809 static inline struct i2c_client
*of_find_i2c_device_by_node(struct device_node
*node
)
814 static inline struct i2c_adapter
*of_find_i2c_adapter_by_node(struct device_node
*node
)
819 static inline struct i2c_adapter
*of_get_i2c_adapter_by_node(struct device_node
*node
)
824 static inline const struct of_device_id
825 *i2c_of_match_device(const struct of_device_id
*matches
,
826 struct i2c_client
*client
)
831 #endif /* CONFIG_OF */
833 #if IS_ENABLED(CONFIG_ACPI)
834 u32
i2c_acpi_find_bus_speed(struct device
*dev
);
835 struct i2c_client
*i2c_acpi_new_device(struct device
*dev
, int index
,
836 struct i2c_board_info
*info
);
838 static inline u32
i2c_acpi_find_bus_speed(struct device
*dev
)
842 static inline struct i2c_client
*i2c_acpi_new_device(struct device
*dev
,
843 int index
, struct i2c_board_info
*info
)
847 #endif /* CONFIG_ACPI */
849 #endif /* _LINUX_I2C_H */