]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - include/linux/ide.h
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ide: add ->dev and ->host_priv fields to struct ide_host
[mirror_ubuntu-artful-kernel.git] / include / linux / ide.h
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/hdreg.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #ifdef CONFIG_BLK_DEV_IDEACPI
21 #include <acpi/acpi.h>
22 #endif
23 #include <asm/byteorder.h>
24 #include <asm/system.h>
25 #include <asm/io.h>
26 #include <asm/mutex.h>
27
28 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
29 # define SUPPORT_VLB_SYNC 0
30 #else
31 # define SUPPORT_VLB_SYNC 1
32 #endif
33
34 /*
35 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
36 * number.
37 */
38
39 #define IDE_NO_IRQ (-1)
40
41 typedef unsigned char byte; /* used everywhere */
42
43 /*
44 * Probably not wise to fiddle with these
45 */
46 #define ERROR_MAX 8 /* Max read/write errors per sector */
47 #define ERROR_RESET 3 /* Reset controller every 4th retry */
48 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
49
50 /*
51 * state flags
52 */
53
54 #define DMA_PIO_RETRY 1 /* retrying in PIO */
55
56 #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
57 #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
58
59 /*
60 * Definitions for accessing IDE controller registers
61 */
62 #define IDE_NR_PORTS (10)
63
64 struct ide_io_ports {
65 unsigned long data_addr;
66
67 union {
68 unsigned long error_addr; /* read: error */
69 unsigned long feature_addr; /* write: feature */
70 };
71
72 unsigned long nsect_addr;
73 unsigned long lbal_addr;
74 unsigned long lbam_addr;
75 unsigned long lbah_addr;
76
77 unsigned long device_addr;
78
79 union {
80 unsigned long status_addr; /*  read: status  */
81 unsigned long command_addr; /* write: command */
82 };
83
84 unsigned long ctl_addr;
85
86 unsigned long irq_addr;
87 };
88
89 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
90 #define BAD_R_STAT (BUSY_STAT | ERR_STAT)
91 #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
92 #define BAD_STAT (BAD_R_STAT | DRQ_STAT)
93 #define DRIVE_READY (READY_STAT | SEEK_STAT)
94
95 #define BAD_CRC (ABRT_ERR | ICRC_ERR)
96
97 #define SATA_NR_PORTS (3) /* 16 possible ?? */
98
99 #define SATA_STATUS_OFFSET (0)
100 #define SATA_ERROR_OFFSET (1)
101 #define SATA_CONTROL_OFFSET (2)
102
103 /*
104 * Our Physical Region Descriptor (PRD) table should be large enough
105 * to handle the biggest I/O request we are likely to see. Since requests
106 * can have no more than 256 sectors, and since the typical blocksize is
107 * two or more sectors, we could get by with a limit of 128 entries here for
108 * the usual worst case. Most requests seem to include some contiguous blocks,
109 * further reducing the number of table entries required.
110 *
111 * The driver reverts to PIO mode for individual requests that exceed
112 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
113 * 100% of all crazy scenarios here is not necessary.
114 *
115 * As it turns out though, we must allocate a full 4KB page for this,
116 * so the two PRD tables (ide0 & ide1) will each get half of that,
117 * allowing each to have about 256 entries (8 bytes each) from this.
118 */
119 #define PRD_BYTES 8
120 #define PRD_ENTRIES 256
121
122 /*
123 * Some more useful definitions
124 */
125 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
126 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
127 #define SECTOR_SIZE 512
128 #define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
129 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
130
131 /*
132 * Timeouts for various operations:
133 */
134 #define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
135 #define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
136 #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
137 #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
138 #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
139 #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
140
141 /*
142 * Op codes for special requests to be handled by ide_special_rq().
143 * Values should be in the range of 0x20 to 0x3f.
144 */
145 #define REQ_DRIVE_RESET 0x20
146
147 /*
148 * Check for an interrupt and acknowledge the interrupt status
149 */
150 struct hwif_s;
151 typedef int (ide_ack_intr_t)(struct hwif_s *);
152
153 /*
154 * hwif_chipset_t is used to keep track of the specific hardware
155 * chipset used by each IDE interface, if known.
156 */
157 enum { ide_unknown, ide_generic, ide_pci,
158 ide_cmd640, ide_dtc2278, ide_ali14xx,
159 ide_qd65xx, ide_umc8672, ide_ht6560b,
160 ide_rz1000, ide_trm290,
161 ide_cmd646, ide_cy82c693, ide_4drives,
162 ide_pmac, ide_acorn,
163 ide_au1xxx, ide_palm3710
164 };
165
166 typedef u8 hwif_chipset_t;
167
168 /*
169 * Structure to hold all information about the location of this port
170 */
171 typedef struct hw_regs_s {
172 union {
173 struct ide_io_ports io_ports;
174 unsigned long io_ports_array[IDE_NR_PORTS];
175 };
176
177 int irq; /* our irq number */
178 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
179 hwif_chipset_t chipset;
180 struct device *dev, *parent;
181 unsigned long config;
182 } hw_regs_t;
183
184 void ide_init_port_data(struct hwif_s *, unsigned int);
185 void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
186
187 static inline void ide_std_init_ports(hw_regs_t *hw,
188 unsigned long io_addr,
189 unsigned long ctl_addr)
190 {
191 unsigned int i;
192
193 for (i = 0; i <= 7; i++)
194 hw->io_ports_array[i] = io_addr++;
195
196 hw->io_ports.ctl_addr = ctl_addr;
197 }
198
199 /* for IDE PCI controllers in legacy mode, temporary */
200 static inline int __ide_default_irq(unsigned long base)
201 {
202 switch (base) {
203 #ifdef CONFIG_IA64
204 case 0x1f0: return isa_irq_to_vector(14);
205 case 0x170: return isa_irq_to_vector(15);
206 #else
207 case 0x1f0: return 14;
208 case 0x170: return 15;
209 #endif
210 }
211 return 0;
212 }
213
214 #include <asm/ide.h>
215
216 #if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
217 #undef MAX_HWIFS
218 #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
219 #endif
220
221 /* Currently only m68k, apus and m8xx need it */
222 #ifndef IDE_ARCH_ACK_INTR
223 # define ide_ack_intr(hwif) (1)
224 #endif
225
226 /* Currently only Atari needs it */
227 #ifndef IDE_ARCH_LOCK
228 # define ide_release_lock() do {} while (0)
229 # define ide_get_lock(hdlr, data) do {} while (0)
230 #endif /* IDE_ARCH_LOCK */
231
232 /*
233 * Now for the data we need to maintain per-drive: ide_drive_t
234 */
235
236 #define ide_scsi 0x21
237 #define ide_disk 0x20
238 #define ide_optical 0x7
239 #define ide_cdrom 0x5
240 #define ide_tape 0x1
241 #define ide_floppy 0x0
242
243 /*
244 * Special Driver Flags
245 *
246 * set_geometry : respecify drive geometry
247 * recalibrate : seek to cyl 0
248 * set_multmode : set multmode count
249 * set_tune : tune interface for drive
250 * serviced : service command
251 * reserved : unused
252 */
253 typedef union {
254 unsigned all : 8;
255 struct {
256 unsigned set_geometry : 1;
257 unsigned recalibrate : 1;
258 unsigned set_multmode : 1;
259 unsigned set_tune : 1;
260 unsigned serviced : 1;
261 unsigned reserved : 3;
262 } b;
263 } special_t;
264
265 /*
266 * ATA-IDE Select Register, aka Device-Head
267 *
268 * head : always zeros here
269 * unit : drive select number: 0/1
270 * bit5 : always 1
271 * lba : using LBA instead of CHS
272 * bit7 : always 1
273 */
274 typedef union {
275 unsigned all : 8;
276 struct {
277 #if defined(__LITTLE_ENDIAN_BITFIELD)
278 unsigned head : 4;
279 unsigned unit : 1;
280 unsigned bit5 : 1;
281 unsigned lba : 1;
282 unsigned bit7 : 1;
283 #elif defined(__BIG_ENDIAN_BITFIELD)
284 unsigned bit7 : 1;
285 unsigned lba : 1;
286 unsigned bit5 : 1;
287 unsigned unit : 1;
288 unsigned head : 4;
289 #else
290 #error "Please fix <asm/byteorder.h>"
291 #endif
292 } b;
293 } select_t, ata_select_t;
294
295 /*
296 * Status returned from various ide_ functions
297 */
298 typedef enum {
299 ide_stopped, /* no drive operation was started */
300 ide_started, /* a drive operation was started, handler was set */
301 } ide_startstop_t;
302
303 struct ide_driver_s;
304 struct ide_settings_s;
305
306 #ifdef CONFIG_BLK_DEV_IDEACPI
307 struct ide_acpi_drive_link;
308 struct ide_acpi_hwif_link;
309 #endif
310
311 /* ATAPI device flags */
312 enum {
313 IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
314 IDE_AFLAG_MEDIA_CHANGED = (1 << 1),
315
316 /* ide-cd */
317 /* Drive cannot lock the door. */
318 IDE_AFLAG_NO_DOORLOCK = (1 << 2),
319 /* Drive cannot eject the disc. */
320 IDE_AFLAG_NO_EJECT = (1 << 3),
321 /* Drive is a pre ATAPI 1.2 drive. */
322 IDE_AFLAG_PRE_ATAPI12 = (1 << 4),
323 /* TOC addresses are in BCD. */
324 IDE_AFLAG_TOCADDR_AS_BCD = (1 << 5),
325 /* TOC track numbers are in BCD. */
326 IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 6),
327 /*
328 * Drive does not provide data in multiples of SECTOR_SIZE
329 * when more than one interrupt is needed.
330 */
331 IDE_AFLAG_LIMIT_NFRAMES = (1 << 7),
332 /* Seeking in progress. */
333 IDE_AFLAG_SEEKING = (1 << 8),
334 /* Saved TOC information is current. */
335 IDE_AFLAG_TOC_VALID = (1 << 9),
336 /* We think that the drive door is locked. */
337 IDE_AFLAG_DOOR_LOCKED = (1 << 10),
338 /* SET_CD_SPEED command is unsupported. */
339 IDE_AFLAG_NO_SPEED_SELECT = (1 << 11),
340 IDE_AFLAG_VERTOS_300_SSD = (1 << 12),
341 IDE_AFLAG_VERTOS_600_ESD = (1 << 13),
342 IDE_AFLAG_SANYO_3CD = (1 << 14),
343 IDE_AFLAG_FULL_CAPS_PAGE = (1 << 15),
344 IDE_AFLAG_PLAY_AUDIO_OK = (1 << 16),
345 IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17),
346
347 /* ide-floppy */
348 /* Format in progress */
349 IDE_AFLAG_FORMAT_IN_PROGRESS = (1 << 18),
350 /* Avoid commands not supported in Clik drive */
351 IDE_AFLAG_CLIK_DRIVE = (1 << 19),
352 /* Requires BH algorithm for packets */
353 IDE_AFLAG_ZIP_DRIVE = (1 << 20),
354
355 /* ide-tape */
356 IDE_AFLAG_IGNORE_DSC = (1 << 21),
357 /* 0 When the tape position is unknown */
358 IDE_AFLAG_ADDRESS_VALID = (1 << 22),
359 /* Device already opened */
360 IDE_AFLAG_BUSY = (1 << 23),
361 /* Attempt to auto-detect the current user block size */
362 IDE_AFLAG_DETECT_BS = (1 << 24),
363 /* Currently on a filemark */
364 IDE_AFLAG_FILEMARK = (1 << 25),
365 /* 0 = no tape is loaded, so we don't rewind after ejecting */
366 IDE_AFLAG_MEDIUM_PRESENT = (1 << 26)
367 };
368
369 struct ide_drive_s {
370 char name[4]; /* drive name, such as "hda" */
371 char driver_req[10]; /* requests specific driver */
372
373 struct request_queue *queue; /* request queue */
374
375 struct request *rq; /* current request */
376 struct ide_drive_s *next; /* circular list of hwgroup drives */
377 void *driver_data; /* extra driver data */
378 struct hd_driveid *id; /* drive model identification info */
379 #ifdef CONFIG_IDE_PROC_FS
380 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
381 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
382 #endif
383 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
384
385 unsigned long sleep; /* sleep until this time */
386 unsigned long service_start; /* time we started last request */
387 unsigned long service_time; /* service time of last request */
388 unsigned long timeout; /* max time to wait for irq */
389
390 special_t special; /* special action flags */
391 select_t select; /* basic drive/head select reg value */
392
393 u8 keep_settings; /* restore settings after drive reset */
394 u8 using_dma; /* disk is using dma for read/write */
395 u8 retry_pio; /* retrying dma capable host in pio */
396 u8 state; /* retry state */
397 u8 waiting_for_dma; /* dma currently in progress */
398 u8 unmask; /* okay to unmask other irqs */
399 u8 noflush; /* don't attempt flushes */
400 u8 dsc_overlap; /* DSC overlap */
401 u8 nice1; /* give potential excess bandwidth */
402
403 unsigned present : 1; /* drive is physically present */
404 unsigned dead : 1; /* device ejected hint */
405 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
406 unsigned noprobe : 1; /* from: hdx=noprobe */
407 unsigned removable : 1; /* 1 if need to do check_media_change */
408 unsigned attach : 1; /* needed for removable devices */
409 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
410 unsigned no_unmask : 1; /* disallow setting unmask bit */
411 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
412 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
413 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
414 unsigned nodma : 1; /* disallow DMA */
415 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
416 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
417 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
418 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
419 unsigned post_reset : 1;
420 unsigned udma33_warned : 1;
421
422 u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
423 u8 quirk_list; /* considered quirky, set for a specific host */
424 u8 init_speed; /* transfer rate set at boot */
425 u8 current_speed; /* current transfer rate set */
426 u8 desired_speed; /* desired transfer rate set */
427 u8 dn; /* now wide spread use */
428 u8 wcache; /* status of write cache */
429 u8 acoustic; /* acoustic management */
430 u8 media; /* disk, cdrom, tape, floppy, ... */
431 u8 ready_stat; /* min status value for drive ready */
432 u8 mult_count; /* current multiple sector setting */
433 u8 mult_req; /* requested multiple sector setting */
434 u8 tune_req; /* requested drive tuning setting */
435 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
436 u8 bad_wstat; /* used for ignoring WRERR_STAT */
437 u8 nowerr; /* used for ignoring WRERR_STAT */
438 u8 sect0; /* offset of first sector for DM6:DDO */
439 u8 head; /* "real" number of heads */
440 u8 sect; /* "real" sectors per track */
441 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
442 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
443
444 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
445 unsigned int cyl; /* "real" number of cyls */
446 unsigned int drive_data; /* used by set_pio_mode/selectproc */
447 unsigned int failures; /* current failure count */
448 unsigned int max_failures; /* maximum allowed failure count */
449 u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
450
451 u64 capacity64; /* total number of sectors */
452
453 int lun; /* logical unit */
454 int crc_count; /* crc counter to reduce drive speed */
455 #ifdef CONFIG_BLK_DEV_IDEACPI
456 struct ide_acpi_drive_link *acpidata;
457 #endif
458 struct list_head list;
459 struct device gendev;
460 struct completion gendev_rel_comp; /* to deal with device release() */
461
462 /* callback for packet commands */
463 void (*pc_callback)(struct ide_drive_s *);
464
465 unsigned long atapi_flags;
466 };
467
468 typedef struct ide_drive_s ide_drive_t;
469
470 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
471
472 #define IDE_CHIPSET_PCI_MASK \
473 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
474 #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
475
476 struct ide_task_s;
477 struct ide_port_info;
478
479 struct ide_tp_ops {
480 void (*exec_command)(struct hwif_s *, u8);
481 u8 (*read_status)(struct hwif_s *);
482 u8 (*read_altstatus)(struct hwif_s *);
483 u8 (*read_sff_dma_status)(struct hwif_s *);
484
485 void (*set_irq)(struct hwif_s *, int);
486
487 void (*tf_load)(ide_drive_t *, struct ide_task_s *);
488 void (*tf_read)(ide_drive_t *, struct ide_task_s *);
489
490 void (*input_data)(ide_drive_t *, struct request *, void *,
491 unsigned int);
492 void (*output_data)(ide_drive_t *, struct request *, void *,
493 unsigned int);
494 };
495
496 extern const struct ide_tp_ops default_tp_ops;
497
498 struct ide_port_ops {
499 /* host specific initialization of a device */
500 void (*init_dev)(ide_drive_t *);
501 /* routine to program host for PIO mode */
502 void (*set_pio_mode)(ide_drive_t *, const u8);
503 /* routine to program host for DMA mode */
504 void (*set_dma_mode)(ide_drive_t *, const u8);
505 /* tweaks hardware to select drive */
506 void (*selectproc)(ide_drive_t *);
507 /* chipset polling based on hba specifics */
508 int (*reset_poll)(ide_drive_t *);
509 /* chipset specific changes to default for device-hba resets */
510 void (*pre_reset)(ide_drive_t *);
511 /* routine to reset controller after a disk reset */
512 void (*resetproc)(ide_drive_t *);
513 /* special host masking for drive selection */
514 void (*maskproc)(ide_drive_t *, int);
515 /* check host's drive quirk list */
516 void (*quirkproc)(ide_drive_t *);
517
518 u8 (*mdma_filter)(ide_drive_t *);
519 u8 (*udma_filter)(ide_drive_t *);
520
521 u8 (*cable_detect)(struct hwif_s *);
522 };
523
524 struct ide_dma_ops {
525 void (*dma_host_set)(struct ide_drive_s *, int);
526 int (*dma_setup)(struct ide_drive_s *);
527 void (*dma_exec_cmd)(struct ide_drive_s *, u8);
528 void (*dma_start)(struct ide_drive_s *);
529 int (*dma_end)(struct ide_drive_s *);
530 int (*dma_test_irq)(struct ide_drive_s *);
531 void (*dma_lost_irq)(struct ide_drive_s *);
532 void (*dma_timeout)(struct ide_drive_s *);
533 };
534
535 typedef struct hwif_s {
536 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
537 struct hwif_s *mate; /* other hwif from same PCI chip */
538 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
539 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
540
541 char name[6]; /* name of interface, eg. "ide0" */
542
543 struct ide_io_ports io_ports;
544
545 unsigned long sata_scr[SATA_NR_PORTS];
546
547 ide_drive_t drives[MAX_DRIVES]; /* drive info */
548
549 u8 major; /* our major number */
550 u8 index; /* 0 for ide0; 1 for ide1; ... */
551 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
552 u8 bus_state; /* power state of the IDE bus */
553
554 u32 host_flags;
555
556 u8 pio_mask;
557
558 u8 ultra_mask;
559 u8 mwdma_mask;
560 u8 swdma_mask;
561
562 u8 cbl; /* cable type */
563
564 hwif_chipset_t chipset; /* sub-module for tuning.. */
565
566 struct device *dev;
567
568 ide_ack_intr_t *ack_intr;
569
570 void (*rw_disk)(ide_drive_t *, struct request *);
571
572 const struct ide_tp_ops *tp_ops;
573 const struct ide_port_ops *port_ops;
574 const struct ide_dma_ops *dma_ops;
575
576 void (*ide_dma_clear_irq)(ide_drive_t *drive);
577
578 /* dma physical region descriptor table (cpu view) */
579 unsigned int *dmatable_cpu;
580 /* dma physical region descriptor table (dma view) */
581 dma_addr_t dmatable_dma;
582 /* Scatter-gather list used to build the above */
583 struct scatterlist *sg_table;
584 int sg_max_nents; /* Maximum number of entries in it */
585 int sg_nents; /* Current number of entries in it */
586 int sg_dma_direction; /* dma transfer direction */
587
588 /* data phase of the active command (currently only valid for PIO/DMA) */
589 int data_phase;
590
591 unsigned int nsect;
592 unsigned int nleft;
593 struct scatterlist *cursg;
594 unsigned int cursg_ofs;
595
596 int rqsize; /* max sectors per request */
597 int irq; /* our irq number */
598
599 unsigned long dma_base; /* base addr for dma ports */
600
601 unsigned long config_data; /* for use by chipset-specific code */
602 unsigned long select_data; /* for use by chipset-specific code */
603
604 unsigned long extra_base; /* extra addr for dma ports */
605 unsigned extra_ports; /* number of extra dma ports */
606
607 unsigned present : 1; /* this interface exists */
608 unsigned serialized : 1; /* serialized all channel operation */
609 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
610 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
611
612 struct device gendev;
613 struct device *portdev;
614
615 struct completion gendev_rel_comp; /* To deal with device release() */
616
617 void *hwif_data; /* extra hwif data */
618
619 unsigned dma;
620
621 #ifdef CONFIG_BLK_DEV_IDEACPI
622 struct ide_acpi_hwif_link *acpidata;
623 #endif
624 } ____cacheline_internodealigned_in_smp ide_hwif_t;
625
626 struct ide_host {
627 ide_hwif_t *ports[MAX_HWIFS];
628 unsigned int n_ports;
629 struct device *dev[2];
630 void *host_priv;
631 };
632
633 /*
634 * internal ide interrupt handler type
635 */
636 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
637 typedef int (ide_expiry_t)(ide_drive_t *);
638
639 /* used by ide-cd, ide-floppy, etc. */
640 typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);
641
642 typedef struct hwgroup_s {
643 /* irq handler, if active */
644 ide_startstop_t (*handler)(ide_drive_t *);
645
646 /* BOOL: protects all fields below */
647 volatile int busy;
648 /* BOOL: wake us up on timer expiry */
649 unsigned int sleeping : 1;
650 /* BOOL: polling active & poll_timeout field valid */
651 unsigned int polling : 1;
652
653 /* current drive */
654 ide_drive_t *drive;
655 /* ptr to current hwif in linked-list */
656 ide_hwif_t *hwif;
657
658 /* current request */
659 struct request *rq;
660
661 /* failsafe timer */
662 struct timer_list timer;
663 /* timeout value during long polls */
664 unsigned long poll_timeout;
665 /* queried upon timeouts */
666 int (*expiry)(ide_drive_t *);
667
668 int req_gen;
669 int req_gen_timer;
670 } ide_hwgroup_t;
671
672 typedef struct ide_driver_s ide_driver_t;
673
674 extern struct mutex ide_setting_mtx;
675
676 int set_io_32bit(ide_drive_t *, int);
677 int set_pio_mode(ide_drive_t *, int);
678 int set_using_dma(ide_drive_t *, int);
679
680 /* ATAPI packet command flags */
681 enum {
682 /* set when an error is considered normal - no retry (ide-tape) */
683 PC_FLAG_ABORT = (1 << 0),
684 PC_FLAG_SUPPRESS_ERROR = (1 << 1),
685 PC_FLAG_WAIT_FOR_DSC = (1 << 2),
686 PC_FLAG_DMA_OK = (1 << 3),
687 PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
688 PC_FLAG_DMA_ERROR = (1 << 5),
689 PC_FLAG_WRITING = (1 << 6),
690 /* command timed out */
691 PC_FLAG_TIMEDOUT = (1 << 7),
692 };
693
694 struct ide_atapi_pc {
695 /* actual packet bytes */
696 u8 c[12];
697 /* incremented on each retry */
698 int retries;
699 int error;
700
701 /* bytes to transfer */
702 int req_xfer;
703 /* bytes actually transferred */
704 int xferred;
705
706 /* data buffer */
707 u8 *buf;
708 /* current buffer position */
709 u8 *cur_pos;
710 int buf_size;
711 /* missing/available data on the current buffer */
712 int b_count;
713
714 /* the corresponding request */
715 struct request *rq;
716
717 unsigned long flags;
718
719 /*
720 * those are more or less driver-specific and some of them are subject
721 * to change/removal later.
722 */
723 u8 pc_buf[256];
724
725 /* idetape only */
726 struct idetape_bh *bh;
727 char *b_data;
728
729 /* idescsi only for now */
730 struct scatterlist *sg;
731 unsigned int sg_cnt;
732
733 struct scsi_cmnd *scsi_cmd;
734 void (*done) (struct scsi_cmnd *);
735
736 unsigned long timeout;
737 };
738
739 #ifdef CONFIG_IDE_PROC_FS
740 /*
741 * configurable drive settings
742 */
743
744 #define TYPE_INT 0
745 #define TYPE_BYTE 1
746 #define TYPE_SHORT 2
747
748 #define SETTING_READ (1 << 0)
749 #define SETTING_WRITE (1 << 1)
750 #define SETTING_RW (SETTING_READ | SETTING_WRITE)
751
752 typedef int (ide_procset_t)(ide_drive_t *, int);
753 typedef struct ide_settings_s {
754 char *name;
755 int rw;
756 int data_type;
757 int min;
758 int max;
759 int mul_factor;
760 int div_factor;
761 void *data;
762 ide_procset_t *set;
763 int auto_remove;
764 struct ide_settings_s *next;
765 } ide_settings_t;
766
767 int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
768
769 /*
770 * /proc/ide interface
771 */
772 typedef struct {
773 const char *name;
774 mode_t mode;
775 read_proc_t *read_proc;
776 write_proc_t *write_proc;
777 } ide_proc_entry_t;
778
779 void proc_ide_create(void);
780 void proc_ide_destroy(void);
781 void ide_proc_register_port(ide_hwif_t *);
782 void ide_proc_port_register_devices(ide_hwif_t *);
783 void ide_proc_unregister_device(ide_drive_t *);
784 void ide_proc_unregister_port(ide_hwif_t *);
785 void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
786 void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
787
788 void ide_add_generic_settings(ide_drive_t *);
789
790 read_proc_t proc_ide_read_capacity;
791 read_proc_t proc_ide_read_geometry;
792
793 /*
794 * Standard exit stuff:
795 */
796 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
797 { \
798 len -= off; \
799 if (len < count) { \
800 *eof = 1; \
801 if (len <= 0) \
802 return 0; \
803 } else \
804 len = count; \
805 *start = page + off; \
806 return len; \
807 }
808 #else
809 static inline void proc_ide_create(void) { ; }
810 static inline void proc_ide_destroy(void) { ; }
811 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
812 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
813 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
814 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
815 static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
816 static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
817 static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
818 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
819 #endif
820
821 /*
822 * Power Management step value (rq->pm->pm_step).
823 *
824 * The step value starts at 0 (ide_pm_state_start_suspend) for a
825 * suspend operation or 1000 (ide_pm_state_start_resume) for a
826 * resume operation.
827 *
828 * For each step, the core calls the subdriver start_power_step() first.
829 * This can return:
830 * - ide_stopped : In this case, the core calls us back again unless
831 * step have been set to ide_power_state_completed.
832 * - ide_started : In this case, the channel is left busy until an
833 * async event (interrupt) occurs.
834 * Typically, start_power_step() will issue a taskfile request with
835 * do_rw_taskfile().
836 *
837 * Upon reception of the interrupt, the core will call complete_power_step()
838 * with the error code if any. This routine should update the step value
839 * and return. It should not start a new request. The core will call
840 * start_power_step for the new step value, unless step have been set to
841 * ide_power_state_completed.
842 *
843 * Subdrivers are expected to define their own additional power
844 * steps from 1..999 for suspend and from 1001..1999 for resume,
845 * other values are reserved for future use.
846 */
847
848 enum {
849 ide_pm_state_completed = -1,
850 ide_pm_state_start_suspend = 0,
851 ide_pm_state_start_resume = 1000,
852 };
853
854 /*
855 * Subdrivers support.
856 *
857 * The gendriver.owner field should be set to the module owner of this driver.
858 * The gendriver.name field should be set to the name of this driver
859 */
860 struct ide_driver_s {
861 const char *version;
862 u8 media;
863 unsigned supports_dsc_overlap : 1;
864 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
865 int (*end_request)(ide_drive_t *, int, int);
866 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
867 struct device_driver gen_driver;
868 int (*probe)(ide_drive_t *);
869 void (*remove)(ide_drive_t *);
870 void (*resume)(ide_drive_t *);
871 void (*shutdown)(ide_drive_t *);
872 #ifdef CONFIG_IDE_PROC_FS
873 ide_proc_entry_t *proc;
874 #endif
875 };
876
877 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
878
879 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
880
881 extern int ide_vlb_clk;
882 extern int ide_pci_clk;
883
884 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
885 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
886 int uptodate, int nr_sectors);
887
888 extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
889
890 void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
891 ide_expiry_t *);
892
893 void ide_execute_pkt_cmd(ide_drive_t *);
894
895 void ide_pad_transfer(ide_drive_t *, int, int);
896
897 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
898
899 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
900
901 extern void ide_fix_driveid(struct hd_driveid *);
902
903 extern void ide_fixstring(u8 *, const int, const int);
904
905 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
906
907 extern ide_startstop_t ide_do_reset (ide_drive_t *);
908
909 extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
910
911 extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
912
913 enum {
914 IDE_TFLAG_LBA48 = (1 << 0),
915 IDE_TFLAG_FLAGGED = (1 << 2),
916 IDE_TFLAG_OUT_DATA = (1 << 3),
917 IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
918 IDE_TFLAG_OUT_HOB_NSECT = (1 << 5),
919 IDE_TFLAG_OUT_HOB_LBAL = (1 << 6),
920 IDE_TFLAG_OUT_HOB_LBAM = (1 << 7),
921 IDE_TFLAG_OUT_HOB_LBAH = (1 << 8),
922 IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
923 IDE_TFLAG_OUT_HOB_NSECT |
924 IDE_TFLAG_OUT_HOB_LBAL |
925 IDE_TFLAG_OUT_HOB_LBAM |
926 IDE_TFLAG_OUT_HOB_LBAH,
927 IDE_TFLAG_OUT_FEATURE = (1 << 9),
928 IDE_TFLAG_OUT_NSECT = (1 << 10),
929 IDE_TFLAG_OUT_LBAL = (1 << 11),
930 IDE_TFLAG_OUT_LBAM = (1 << 12),
931 IDE_TFLAG_OUT_LBAH = (1 << 13),
932 IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
933 IDE_TFLAG_OUT_NSECT |
934 IDE_TFLAG_OUT_LBAL |
935 IDE_TFLAG_OUT_LBAM |
936 IDE_TFLAG_OUT_LBAH,
937 IDE_TFLAG_OUT_DEVICE = (1 << 14),
938 IDE_TFLAG_WRITE = (1 << 15),
939 IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
940 IDE_TFLAG_IN_DATA = (1 << 17),
941 IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
942 IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19),
943 IDE_TFLAG_IN_HOB_FEATURE = (1 << 20),
944 IDE_TFLAG_IN_HOB_NSECT = (1 << 21),
945 IDE_TFLAG_IN_HOB_LBAL = (1 << 22),
946 IDE_TFLAG_IN_HOB_LBAM = (1 << 23),
947 IDE_TFLAG_IN_HOB_LBAH = (1 << 24),
948 IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
949 IDE_TFLAG_IN_HOB_LBAM |
950 IDE_TFLAG_IN_HOB_LBAH,
951 IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
952 IDE_TFLAG_IN_HOB_NSECT |
953 IDE_TFLAG_IN_HOB_LBA,
954 IDE_TFLAG_IN_FEATURE = (1 << 1),
955 IDE_TFLAG_IN_NSECT = (1 << 25),
956 IDE_TFLAG_IN_LBAL = (1 << 26),
957 IDE_TFLAG_IN_LBAM = (1 << 27),
958 IDE_TFLAG_IN_LBAH = (1 << 28),
959 IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
960 IDE_TFLAG_IN_LBAM |
961 IDE_TFLAG_IN_LBAH,
962 IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
963 IDE_TFLAG_IN_LBA,
964 IDE_TFLAG_IN_DEVICE = (1 << 29),
965 IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
966 IDE_TFLAG_IN_HOB,
967 IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
968 IDE_TFLAG_IN_TF,
969 IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
970 IDE_TFLAG_IN_DEVICE,
971 /* force 16-bit I/O operations */
972 IDE_TFLAG_IO_16BIT = (1 << 30),
973 /* ide_task_t was allocated using kmalloc() */
974 IDE_TFLAG_DYN = (1 << 31),
975 };
976
977 struct ide_taskfile {
978 u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
979
980 u8 hob_feature; /* 1-5: additional data to support LBA48 */
981 u8 hob_nsect;
982 u8 hob_lbal;
983 u8 hob_lbam;
984 u8 hob_lbah;
985
986 u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
987
988 union { /*  7: */
989 u8 error; /* read: error */
990 u8 feature; /* write: feature */
991 };
992
993 u8 nsect; /* 8: number of sectors */
994 u8 lbal; /* 9: LBA low */
995 u8 lbam; /* 10: LBA mid */
996 u8 lbah; /* 11: LBA high */
997
998 u8 device; /* 12: device select */
999
1000 union { /* 13: */
1001 u8 status; /*  read: status  */
1002 u8 command; /* write: command */
1003 };
1004 };
1005
1006 typedef struct ide_task_s {
1007 union {
1008 struct ide_taskfile tf;
1009 u8 tf_array[14];
1010 };
1011 u32 tf_flags;
1012 int data_phase;
1013 struct request *rq; /* copy of request */
1014 void *special; /* valid_t generally */
1015 } ide_task_t;
1016
1017 void ide_tf_dump(const char *, struct ide_taskfile *);
1018
1019 void ide_exec_command(ide_hwif_t *, u8);
1020 u8 ide_read_status(ide_hwif_t *);
1021 u8 ide_read_altstatus(ide_hwif_t *);
1022 u8 ide_read_sff_dma_status(ide_hwif_t *);
1023
1024 void ide_set_irq(ide_hwif_t *, int);
1025
1026 void ide_tf_load(ide_drive_t *, ide_task_t *);
1027 void ide_tf_read(ide_drive_t *, ide_task_t *);
1028
1029 void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
1030 void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
1031
1032 extern void SELECT_DRIVE(ide_drive_t *);
1033 void SELECT_MASK(ide_drive_t *, int);
1034
1035 u8 ide_read_error(ide_drive_t *);
1036 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1037
1038 extern int drive_is_ready(ide_drive_t *);
1039
1040 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
1041
1042 ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
1043 ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
1044 void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
1045 void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
1046 void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
1047 int));
1048 ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
1049 ide_handler_t *, unsigned int, ide_expiry_t *);
1050 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
1051 ide_handler_t *, unsigned int, ide_expiry_t *);
1052
1053 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1054
1055 void task_end_request(ide_drive_t *, struct request *, u8);
1056
1057 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
1058 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
1059
1060 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1061 int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
1062 int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
1063
1064 extern int ide_driveid_update(ide_drive_t *);
1065 extern int ide_config_drive_speed(ide_drive_t *, u8);
1066 extern u8 eighty_ninty_three (ide_drive_t *);
1067 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1068
1069 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1070
1071 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1072
1073 extern int ide_spin_wait_hwgroup(ide_drive_t *);
1074 extern void ide_timer_expiry(unsigned long);
1075 extern irqreturn_t ide_intr(int irq, void *dev_id);
1076 extern void do_ide_request(struct request_queue *);
1077
1078 void ide_init_disk(struct gendisk *, ide_drive_t *);
1079
1080 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1081 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1082 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1083 #else
1084 #define ide_pci_register_driver(d) pci_register_driver(d)
1085 #endif
1086
1087 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
1088 hw_regs_t *, hw_regs_t **);
1089 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1090
1091 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1092 int ide_pci_set_master(struct pci_dev *, const char *);
1093 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1094 extern const struct ide_dma_ops sff_dma_ops;
1095 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1096 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1097 #else
1098 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1099 const struct ide_port_info *d)
1100 {
1101 return -EINVAL;
1102 }
1103 #endif
1104
1105 typedef struct ide_pci_enablebit_s {
1106 u8 reg; /* byte pci reg holding the enable-bit */
1107 u8 mask; /* mask to isolate the enable-bit */
1108 u8 val; /* value of masked reg when "enabled" */
1109 } ide_pci_enablebit_t;
1110
1111 enum {
1112 /* Uses ISA control ports not PCI ones. */
1113 IDE_HFLAG_ISA_PORTS = (1 << 0),
1114 /* single port device */
1115 IDE_HFLAG_SINGLE = (1 << 1),
1116 /* don't use legacy PIO blacklist */
1117 IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
1118 /* set for the second port of QD65xx */
1119 IDE_HFLAG_QD_2ND_PORT = (1 << 3),
1120 /* use PIO8/9 for prefetch off/on */
1121 IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
1122 /* use PIO6/7 for fast-devsel off/on */
1123 IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
1124 /* use 100-102 and 200-202 PIO values to set DMA modes */
1125 IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
1126 /*
1127 * keep DMA setting when programming PIO mode, may be used only
1128 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1129 */
1130 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1131 /* program host for the transfer mode after programming device */
1132 IDE_HFLAG_POST_SET_MODE = (1 << 8),
1133 /* don't program host/device for the transfer mode ("smart" hosts) */
1134 IDE_HFLAG_NO_SET_MODE = (1 << 9),
1135 /* trust BIOS for programming chipset/device for DMA */
1136 IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
1137 /* host is CS5510/CS5520 */
1138 IDE_HFLAG_CS5520 = (1 << 11),
1139 /* ATAPI DMA is unsupported */
1140 IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
1141 /* set if host is a "non-bootable" controller */
1142 IDE_HFLAG_NON_BOOTABLE = (1 << 13),
1143 /* host doesn't support DMA */
1144 IDE_HFLAG_NO_DMA = (1 << 14),
1145 /* check if host is PCI IDE device before allowing DMA */
1146 IDE_HFLAG_NO_AUTODMA = (1 << 15),
1147 /* host uses MMIO */
1148 IDE_HFLAG_MMIO = (1 << 16),
1149 /* no LBA48 */
1150 IDE_HFLAG_NO_LBA48 = (1 << 17),
1151 /* no LBA48 DMA */
1152 IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
1153 /* data FIFO is cleared by an error */
1154 IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
1155 /* serialize ports */
1156 IDE_HFLAG_SERIALIZE = (1 << 20),
1157 /* use legacy IRQs */
1158 IDE_HFLAG_LEGACY_IRQS = (1 << 21),
1159 /* force use of legacy IRQs */
1160 IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
1161 /* limit LBA48 requests to 256 sectors */
1162 IDE_HFLAG_RQSIZE_256 = (1 << 23),
1163 /* use 32-bit I/O ops */
1164 IDE_HFLAG_IO_32BIT = (1 << 24),
1165 /* unmask IRQs */
1166 IDE_HFLAG_UNMASK_IRQS = (1 << 25),
1167 /* serialize ports if DMA is possible (for sl82c105) */
1168 IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
1169 /* force host out of "simplex" mode */
1170 IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
1171 /* DSC overlap is unsupported */
1172 IDE_HFLAG_NO_DSC = (1 << 29),
1173 /* never use 32-bit I/O ops */
1174 IDE_HFLAG_NO_IO_32BIT = (1 << 30),
1175 /* never unmask IRQs */
1176 IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
1177 };
1178
1179 #ifdef CONFIG_BLK_DEV_OFFBOARD
1180 # define IDE_HFLAG_OFF_BOARD 0
1181 #else
1182 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1183 #endif
1184
1185 struct ide_port_info {
1186 char *name;
1187 unsigned int (*init_chipset)(struct pci_dev *, const char *);
1188 void (*init_iops)(ide_hwif_t *);
1189 void (*init_hwif)(ide_hwif_t *);
1190 int (*init_dma)(ide_hwif_t *,
1191 const struct ide_port_info *);
1192
1193 const struct ide_tp_ops *tp_ops;
1194 const struct ide_port_ops *port_ops;
1195 const struct ide_dma_ops *dma_ops;
1196
1197 ide_pci_enablebit_t enablebits[2];
1198 hwif_chipset_t chipset;
1199 u32 host_flags;
1200 u8 pio_mask;
1201 u8 swdma_mask;
1202 u8 mwdma_mask;
1203 u8 udma_mask;
1204 };
1205
1206 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1207 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1208 const struct ide_port_info *, void *);
1209
1210 void ide_map_sg(ide_drive_t *, struct request *);
1211 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1212
1213 #define BAD_DMA_DRIVE 0
1214 #define GOOD_DMA_DRIVE 1
1215
1216 struct drive_list_entry {
1217 const char *id_model;
1218 const char *id_firmware;
1219 };
1220
1221 int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
1222
1223 #ifdef CONFIG_BLK_DEV_IDEDMA
1224 int __ide_dma_bad_drive(ide_drive_t *);
1225 int ide_id_dma_bug(ide_drive_t *);
1226
1227 u8 ide_find_dma_mode(ide_drive_t *, u8);
1228
1229 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1230 {
1231 return ide_find_dma_mode(drive, XFER_UDMA_6);
1232 }
1233
1234 void ide_dma_off_quietly(ide_drive_t *);
1235 void ide_dma_off(ide_drive_t *);
1236 void ide_dma_on(ide_drive_t *);
1237 int ide_set_dma(ide_drive_t *);
1238 void ide_check_dma_crc(ide_drive_t *);
1239 ide_startstop_t ide_dma_intr(ide_drive_t *);
1240
1241 int ide_build_sglist(ide_drive_t *, struct request *);
1242 void ide_destroy_dmatable(ide_drive_t *);
1243
1244 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1245 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1246 int ide_allocate_dma_engine(ide_hwif_t *);
1247 void ide_release_dma_engine(ide_hwif_t *);
1248
1249 void ide_dma_host_set(ide_drive_t *, int);
1250 extern int ide_dma_setup(ide_drive_t *);
1251 void ide_dma_exec_cmd(ide_drive_t *, u8);
1252 extern void ide_dma_start(ide_drive_t *);
1253 extern int __ide_dma_end(ide_drive_t *);
1254 int ide_dma_test_irq(ide_drive_t *);
1255 extern void ide_dma_lost_irq(ide_drive_t *);
1256 extern void ide_dma_timeout(ide_drive_t *);
1257 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1258
1259 #else
1260 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1261 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1262 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1263 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1264 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1265 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1266 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1267 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1268 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1269 #endif /* CONFIG_BLK_DEV_IDEDMA */
1270
1271 #ifndef CONFIG_BLK_DEV_IDEDMA_SFF
1272 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1273 #endif
1274
1275 #ifdef CONFIG_BLK_DEV_IDEACPI
1276 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1277 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1278 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1279 extern void ide_acpi_init(ide_hwif_t *hwif);
1280 void ide_acpi_port_init_devices(ide_hwif_t *);
1281 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1282 #else
1283 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1284 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1285 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1286 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
1287 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1288 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1289 #endif
1290
1291 void ide_remove_port_from_hwgroup(ide_hwif_t *);
1292 void ide_unregister(ide_hwif_t *);
1293
1294 void ide_register_region(struct gendisk *);
1295 void ide_unregister_region(struct gendisk *);
1296
1297 void ide_undecoded_slave(ide_drive_t *);
1298
1299 void ide_port_apply_params(ide_hwif_t *);
1300
1301 struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
1302 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
1303 void ide_host_free(struct ide_host *);
1304 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1305 hw_regs_t **);
1306 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
1307 struct ide_host **);
1308 void ide_host_remove(struct ide_host *);
1309 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1310 void ide_port_unregister_devices(ide_hwif_t *);
1311 void ide_port_scan(ide_hwif_t *);
1312
1313 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1314 {
1315 return hwif->hwif_data;
1316 }
1317
1318 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1319 {
1320 hwif->hwif_data = data;
1321 }
1322
1323 const char *ide_xfer_verbose(u8 mode);
1324 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1325 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1326
1327 static inline int ide_dev_has_iordy(struct hd_driveid *id)
1328 {
1329 return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
1330 }
1331
1332 static inline int ide_dev_is_sata(struct hd_driveid *id)
1333 {
1334 /*
1335 * See if word 93 is 0 AND drive is at least ATA-5 compatible
1336 * verifying that word 80 by casting it to a signed type --
1337 * this trick allows us to filter out the reserved values of
1338 * 0x0000 and 0xffff along with the earlier ATA revisions...
1339 */
1340 if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020)
1341 return 1;
1342 return 0;
1343 }
1344
1345 u64 ide_get_lba_addr(struct ide_taskfile *, int);
1346 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1347
1348 struct ide_timing {
1349 u8 mode;
1350 u8 setup; /* t1 */
1351 u16 act8b; /* t2 for 8-bit io */
1352 u16 rec8b; /* t2i for 8-bit io */
1353 u16 cyc8b; /* t0 for 8-bit io */
1354 u16 active; /* t2 or tD */
1355 u16 recover; /* t2i or tK */
1356 u16 cycle; /* t0 */
1357 u16 udma; /* t2CYCTYP/2 */
1358 };
1359
1360 enum {
1361 IDE_TIMING_SETUP = (1 << 0),
1362 IDE_TIMING_ACT8B = (1 << 1),
1363 IDE_TIMING_REC8B = (1 << 2),
1364 IDE_TIMING_CYC8B = (1 << 3),
1365 IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1366 IDE_TIMING_CYC8B,
1367 IDE_TIMING_ACTIVE = (1 << 4),
1368 IDE_TIMING_RECOVER = (1 << 5),
1369 IDE_TIMING_CYCLE = (1 << 6),
1370 IDE_TIMING_UDMA = (1 << 7),
1371 IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1372 IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1373 IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1374 };
1375
1376 struct ide_timing *ide_timing_find_mode(u8);
1377 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1378 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1379 struct ide_timing *, unsigned int);
1380 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1381
1382 int ide_scan_pio_blacklist(char *);
1383
1384 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1385
1386 int ide_set_pio_mode(ide_drive_t *, u8);
1387 int ide_set_dma_mode(ide_drive_t *, u8);
1388
1389 void ide_set_pio(ide_drive_t *, u8);
1390
1391 static inline void ide_set_max_pio(ide_drive_t *drive)
1392 {
1393 ide_set_pio(drive, 255);
1394 }
1395
1396 extern spinlock_t ide_lock;
1397 extern struct mutex ide_cfg_mtx;
1398 /*
1399 * Structure locking:
1400 *
1401 * ide_cfg_mtx and ide_lock together protect changes to
1402 * ide_hwif_t->{next,hwgroup}
1403 * ide_drive_t->next
1404 *
1405 * ide_hwgroup_t->busy: ide_lock
1406 * ide_hwgroup_t->hwif: ide_lock
1407 * ide_hwif_t->mate: constant, no locking
1408 * ide_drive_t->hwif: constant, no locking
1409 */
1410
1411 #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1412
1413 extern struct bus_type ide_bus_type;
1414 extern struct class *ide_port_class;
1415
1416 /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1417 #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1418
1419 /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1420 #define ide_id_has_flush_cache_ext(id) \
1421 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1422
1423 static inline void ide_dump_identify(u8 *id)
1424 {
1425 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1426 }
1427
1428 static inline int hwif_to_node(ide_hwif_t *hwif)
1429 {
1430 struct pci_dev *dev = to_pci_dev(hwif->dev);
1431 return hwif->dev ? pcibus_to_node(dev->bus) : -1;
1432 }
1433
1434 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
1435 {
1436 ide_hwif_t *hwif = HWIF(drive);
1437
1438 return &hwif->drives[(drive->dn ^ 1) & 1];
1439 }
1440 #endif /* _IDE_H */
Ubuntu Artful kernel mirror