1 /* SPDX-License-Identifier: GPL-2.0 */
5 * linux/include/linux/ide.h
7 * Copyright (C) 1994-2002 Linus Torvalds & authors
10 #include <linux/init.h>
11 #include <linux/ioport.h>
12 #include <linux/ata.h>
13 #include <linux/blkdev.h>
14 #include <linux/proc_fs.h>
15 #include <linux/interrupt.h>
16 #include <linux/bitops.h>
17 #include <linux/bio.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
21 #include <linux/mutex.h>
22 /* for request_sense */
23 #include <linux/cdrom.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <asm/byteorder.h>
29 * Probably not wise to fiddle with these
31 #define SUPPORT_VLB_SYNC 1
32 #define IDE_DEFAULT_MAX_FAILURES 1
33 #define ERROR_MAX 8 /* Max read/write errors per sector */
34 #define ERROR_RESET 3 /* Reset controller every 4th retry */
35 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
39 /* values for ide_request.type */
44 ATA_PRIV_SENSE
, /* sense request */
45 ATA_PRIV_PM_SUSPEND
, /* suspend request */
46 ATA_PRIV_PM_RESUME
, /* resume request */
50 struct scsi_request sreq
;
51 u8 sense
[SCSI_SENSE_BUFFERSIZE
];
55 static inline struct ide_request
*ide_req(struct request
*rq
)
57 return blk_mq_rq_to_pdu(rq
);
60 static inline bool ata_misc_request(struct request
*rq
)
62 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_MISC
;
65 static inline bool ata_taskfile_request(struct request
*rq
)
67 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_TASKFILE
;
70 static inline bool ata_pc_request(struct request
*rq
)
72 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_PC
;
75 static inline bool ata_sense_request(struct request
*rq
)
77 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_SENSE
;
80 static inline bool ata_pm_request(struct request
*rq
)
82 return blk_rq_is_private(rq
) &&
83 (ide_req(rq
)->type
== ATA_PRIV_PM_SUSPEND
||
84 ide_req(rq
)->type
== ATA_PRIV_PM_RESUME
);
87 /* Error codes returned in result to the higher part of the driver. */
89 IDE_DRV_ERROR_GENERAL
= 101,
90 IDE_DRV_ERROR_FILEMARK
= 102,
91 IDE_DRV_ERROR_EOD
= 103,
95 * Definitions for accessing IDE controller registers
97 #define IDE_NR_PORTS (10)
100 unsigned long data_addr
;
103 unsigned long error_addr
; /* read: error */
104 unsigned long feature_addr
; /* write: feature */
107 unsigned long nsect_addr
;
108 unsigned long lbal_addr
;
109 unsigned long lbam_addr
;
110 unsigned long lbah_addr
;
112 unsigned long device_addr
;
115 unsigned long status_addr
; /* read: status */
116 unsigned long command_addr
; /* write: command */
119 unsigned long ctl_addr
;
121 unsigned long irq_addr
;
124 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
126 #define BAD_R_STAT (ATA_BUSY | ATA_ERR)
127 #define BAD_W_STAT (BAD_R_STAT | ATA_DF)
128 #define BAD_STAT (BAD_R_STAT | ATA_DRQ)
129 #define DRIVE_READY (ATA_DRDY | ATA_DSC)
131 #define BAD_CRC (ATA_ABORTED | ATA_ICRC)
133 #define SATA_NR_PORTS (3) /* 16 possible ?? */
135 #define SATA_STATUS_OFFSET (0)
136 #define SATA_ERROR_OFFSET (1)
137 #define SATA_CONTROL_OFFSET (2)
140 * Our Physical Region Descriptor (PRD) table should be large enough
141 * to handle the biggest I/O request we are likely to see. Since requests
142 * can have no more than 256 sectors, and since the typical blocksize is
143 * two or more sectors, we could get by with a limit of 128 entries here for
144 * the usual worst case. Most requests seem to include some contiguous blocks,
145 * further reducing the number of table entries required.
147 * The driver reverts to PIO mode for individual requests that exceed
148 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
149 * 100% of all crazy scenarios here is not necessary.
151 * As it turns out though, we must allocate a full 4KB page for this,
152 * so the two PRD tables (ide0 & ide1) will each get half of that,
153 * allowing each to have about 256 entries (8 bytes each) from this.
156 #define PRD_ENTRIES 256
159 * Some more useful definitions
161 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
162 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
165 * Timeouts for various operations:
168 /* spec allows up to 20ms, but CF cards and SSD drives need more */
169 WAIT_DRQ
= 1 * HZ
, /* 1s */
170 /* some laptops are very slow */
171 WAIT_READY
= 5 * HZ
, /* 5s */
172 /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
173 WAIT_PIDENTIFY
= 10 * HZ
, /* 10s */
174 /* worst case when spinning up */
175 WAIT_WORSTCASE
= 30 * HZ
, /* 30s */
176 /* maximum wait for an IRQ to happen */
177 WAIT_CMD
= 10 * HZ
, /* 10s */
178 /* Some drives require a longer IRQ timeout. */
179 WAIT_FLOPPY_CMD
= 50 * HZ
, /* 50s */
181 * Some drives (for example, Seagate STT3401A Travan) require a very
182 * long timeout, because they don't return an interrupt or clear their
183 * BSY bit until after the command completes (even retension commands).
185 WAIT_TAPE_CMD
= 900 * HZ
, /* 900s */
186 /* minimum sleep time */
187 WAIT_MIN_SLEEP
= HZ
/ 50, /* 20ms */
191 * Op codes for special requests to be handled by ide_special_rq().
192 * Values should be in the range of 0x20 to 0x3f.
194 #define REQ_DRIVE_RESET 0x20
195 #define REQ_DEVSET_EXEC 0x21
196 #define REQ_PARK_HEADS 0x22
197 #define REQ_UNPARK_HEADS 0x23
200 * hwif_chipset_t is used to keep track of the specific hardware
201 * chipset used by each IDE interface, if known.
203 enum { ide_unknown
, ide_generic
, ide_pci
,
204 ide_cmd640
, ide_dtc2278
, ide_ali14xx
,
205 ide_qd65xx
, ide_umc8672
, ide_ht6560b
,
206 ide_4drives
, ide_pmac
, ide_acorn
,
207 ide_au1xxx
, ide_palm3710
210 typedef u8 hwif_chipset_t
;
213 * Structure to hold all information about the location of this port
217 struct ide_io_ports io_ports
;
218 unsigned long io_ports_array
[IDE_NR_PORTS
];
221 int irq
; /* our irq number */
222 struct device
*dev
, *parent
;
223 unsigned long config
;
226 static inline void ide_std_init_ports(struct ide_hw
*hw
,
227 unsigned long io_addr
,
228 unsigned long ctl_addr
)
232 for (i
= 0; i
<= 7; i
++)
233 hw
->io_ports_array
[i
] = io_addr
++;
235 hw
->io_ports
.ctl_addr
= ctl_addr
;
241 * Now for the data we need to maintain per-drive: ide_drive_t
244 #define ide_scsi 0x21
245 #define ide_disk 0x20
246 #define ide_optical 0x7
247 #define ide_cdrom 0x5
249 #define ide_floppy 0x0
252 * Special Driver Flags
255 IDE_SFLAG_SET_GEOMETRY
= (1 << 0),
256 IDE_SFLAG_RECALIBRATE
= (1 << 1),
257 IDE_SFLAG_SET_MULTMODE
= (1 << 2),
261 * Status returned from various ide_ functions
264 ide_stopped
, /* no drive operation was started */
265 ide_started
, /* a drive operation was started, handler was set */
269 IDE_VALID_ERROR
= (1 << 1),
270 IDE_VALID_FEATURE
= IDE_VALID_ERROR
,
271 IDE_VALID_NSECT
= (1 << 2),
272 IDE_VALID_LBAL
= (1 << 3),
273 IDE_VALID_LBAM
= (1 << 4),
274 IDE_VALID_LBAH
= (1 << 5),
275 IDE_VALID_DEVICE
= (1 << 6),
276 IDE_VALID_LBA
= IDE_VALID_LBAL
|
279 IDE_VALID_OUT_TF
= IDE_VALID_FEATURE
|
282 IDE_VALID_IN_TF
= IDE_VALID_NSECT
|
284 IDE_VALID_OUT_HOB
= IDE_VALID_OUT_TF
,
285 IDE_VALID_IN_HOB
= IDE_VALID_ERROR
|
291 IDE_TFLAG_LBA48
= (1 << 0),
292 IDE_TFLAG_WRITE
= (1 << 1),
293 IDE_TFLAG_CUSTOM_HANDLER
= (1 << 2),
294 IDE_TFLAG_DMA_PIO_FALLBACK
= (1 << 3),
295 /* force 16-bit I/O operations */
296 IDE_TFLAG_IO_16BIT
= (1 << 4),
297 /* struct ide_cmd was allocated using kmalloc() */
298 IDE_TFLAG_DYN
= (1 << 5),
299 IDE_TFLAG_FS
= (1 << 6),
300 IDE_TFLAG_MULTI_PIO
= (1 << 7),
301 IDE_TFLAG_SET_XFER
= (1 << 8),
305 IDE_FTFLAG_FLAGGED
= (1 << 0),
306 IDE_FTFLAG_SET_IN_FLAGS
= (1 << 1),
307 IDE_FTFLAG_OUT_DATA
= (1 << 2),
308 IDE_FTFLAG_IN_DATA
= (1 << 3),
311 struct ide_taskfile
{
312 u8 data
; /* 0: data byte (for TASKFILE ioctl) */
314 u8 error
; /* read: error */
315 u8 feature
; /* write: feature */
317 u8 nsect
; /* 2: number of sectors */
318 u8 lbal
; /* 3: LBA low */
319 u8 lbam
; /* 4: LBA mid */
320 u8 lbah
; /* 5: LBA high */
321 u8 device
; /* 6: device select */
323 u8 status
; /* read: status */
324 u8 command
; /* write: command */
329 struct ide_taskfile tf
;
330 struct ide_taskfile hob
;
339 u8 ftf_flags
; /* for TASKFILE ioctl */
342 int sg_nents
; /* number of sg entries */
344 int sg_dma_direction
; /* DMA transfer direction */
348 unsigned int last_xfer_len
;
350 struct scatterlist
*cursg
;
351 unsigned int cursg_ofs
;
353 struct request
*rq
; /* copy of request */
356 /* ATAPI packet command flags */
358 /* set when an error is considered normal - no retry (ide-tape) */
359 PC_FLAG_ABORT
= (1 << 0),
360 PC_FLAG_SUPPRESS_ERROR
= (1 << 1),
361 PC_FLAG_WAIT_FOR_DSC
= (1 << 2),
362 PC_FLAG_DMA_OK
= (1 << 3),
363 PC_FLAG_DMA_IN_PROGRESS
= (1 << 4),
364 PC_FLAG_DMA_ERROR
= (1 << 5),
365 PC_FLAG_WRITING
= (1 << 6),
368 #define ATAPI_WAIT_PC (60 * HZ)
370 struct ide_atapi_pc
{
371 /* actual packet bytes */
373 /* incremented on each retry */
377 /* bytes to transfer */
380 /* the corresponding request */
386 * those are more or less driver-specific and some of them are subject
387 * to change/removal later.
389 unsigned long timeout
;
395 #ifdef CONFIG_BLK_DEV_IDEACPI
396 struct ide_acpi_drive_link
;
397 struct ide_acpi_hwif_link
;
402 struct ide_disk_ops
{
403 int (*check
)(struct ide_drive_s
*, const char *);
404 int (*get_capacity
)(struct ide_drive_s
*);
405 void (*unlock_native_capacity
)(struct ide_drive_s
*);
406 void (*setup
)(struct ide_drive_s
*);
407 void (*flush
)(struct ide_drive_s
*);
408 int (*init_media
)(struct ide_drive_s
*, struct gendisk
*);
409 int (*set_doorlock
)(struct ide_drive_s
*, struct gendisk
*,
411 ide_startstop_t (*do_request
)(struct ide_drive_s
*, struct request
*,
413 int (*ioctl
)(struct ide_drive_s
*, struct block_device
*,
414 fmode_t
, unsigned int, unsigned long);
417 /* ATAPI device flags */
419 IDE_AFLAG_DRQ_INTERRUPT
= (1 << 0),
422 /* Drive cannot eject the disc. */
423 IDE_AFLAG_NO_EJECT
= (1 << 1),
424 /* Drive is a pre ATAPI 1.2 drive. */
425 IDE_AFLAG_PRE_ATAPI12
= (1 << 2),
426 /* TOC addresses are in BCD. */
427 IDE_AFLAG_TOCADDR_AS_BCD
= (1 << 3),
428 /* TOC track numbers are in BCD. */
429 IDE_AFLAG_TOCTRACKS_AS_BCD
= (1 << 4),
430 /* Saved TOC information is current. */
431 IDE_AFLAG_TOC_VALID
= (1 << 6),
432 /* We think that the drive door is locked. */
433 IDE_AFLAG_DOOR_LOCKED
= (1 << 7),
434 /* SET_CD_SPEED command is unsupported. */
435 IDE_AFLAG_NO_SPEED_SELECT
= (1 << 8),
436 IDE_AFLAG_VERTOS_300_SSD
= (1 << 9),
437 IDE_AFLAG_VERTOS_600_ESD
= (1 << 10),
438 IDE_AFLAG_SANYO_3CD
= (1 << 11),
439 IDE_AFLAG_FULL_CAPS_PAGE
= (1 << 12),
440 IDE_AFLAG_PLAY_AUDIO_OK
= (1 << 13),
441 IDE_AFLAG_LE_SPEED_FIELDS
= (1 << 14),
444 /* Avoid commands not supported in Clik drive */
445 IDE_AFLAG_CLIK_DRIVE
= (1 << 15),
446 /* Requires BH algorithm for packets */
447 IDE_AFLAG_ZIP_DRIVE
= (1 << 16),
448 /* Supports format progress report */
449 IDE_AFLAG_SRFP
= (1 << 17),
452 IDE_AFLAG_IGNORE_DSC
= (1 << 18),
453 /* 0 When the tape position is unknown */
454 IDE_AFLAG_ADDRESS_VALID
= (1 << 19),
455 /* Device already opened */
456 IDE_AFLAG_BUSY
= (1 << 20),
457 /* Attempt to auto-detect the current user block size */
458 IDE_AFLAG_DETECT_BS
= (1 << 21),
459 /* Currently on a filemark */
460 IDE_AFLAG_FILEMARK
= (1 << 22),
461 /* 0 = no tape is loaded, so we don't rewind after ejecting */
462 IDE_AFLAG_MEDIUM_PRESENT
= (1 << 23),
464 IDE_AFLAG_NO_AUTOCLOSE
= (1 << 24),
469 /* restore settings after device reset */
470 IDE_DFLAG_KEEP_SETTINGS
= (1 << 0),
471 /* device is using DMA for read/write */
472 IDE_DFLAG_USING_DMA
= (1 << 1),
473 /* okay to unmask other IRQs */
474 IDE_DFLAG_UNMASK
= (1 << 2),
475 /* don't attempt flushes */
476 IDE_DFLAG_NOFLUSH
= (1 << 3),
478 IDE_DFLAG_DSC_OVERLAP
= (1 << 4),
479 /* give potential excess bandwidth */
480 IDE_DFLAG_NICE1
= (1 << 5),
481 /* device is physically present */
482 IDE_DFLAG_PRESENT
= (1 << 6),
483 /* disable Host Protected Area */
484 IDE_DFLAG_NOHPA
= (1 << 7),
485 /* id read from device (synthetic if not set) */
486 IDE_DFLAG_ID_READ
= (1 << 8),
487 IDE_DFLAG_NOPROBE
= (1 << 9),
488 /* need to do check_media_change() */
489 IDE_DFLAG_REMOVABLE
= (1 << 10),
490 /* needed for removable devices */
491 IDE_DFLAG_ATTACH
= (1 << 11),
492 IDE_DFLAG_FORCED_GEOM
= (1 << 12),
493 /* disallow setting unmask bit */
494 IDE_DFLAG_NO_UNMASK
= (1 << 13),
495 /* disallow enabling 32-bit I/O */
496 IDE_DFLAG_NO_IO_32BIT
= (1 << 14),
497 /* for removable only: door lock/unlock works */
498 IDE_DFLAG_DOORLOCKING
= (1 << 15),
500 IDE_DFLAG_NODMA
= (1 << 16),
501 /* powermanagement told us not to do anything, so sleep nicely */
502 IDE_DFLAG_BLOCKED
= (1 << 17),
503 /* sleeping & sleep field valid */
504 IDE_DFLAG_SLEEPING
= (1 << 18),
505 IDE_DFLAG_POST_RESET
= (1 << 19),
506 IDE_DFLAG_UDMA33_WARNED
= (1 << 20),
507 IDE_DFLAG_LBA48
= (1 << 21),
508 /* status of write cache */
509 IDE_DFLAG_WCACHE
= (1 << 22),
510 /* used for ignoring ATA_DF */
511 IDE_DFLAG_NOWERR
= (1 << 23),
512 /* retrying in PIO */
513 IDE_DFLAG_DMA_PIO_RETRY
= (1 << 24),
514 IDE_DFLAG_LBA
= (1 << 25),
515 /* don't unload heads */
516 IDE_DFLAG_NO_UNLOAD
= (1 << 26),
517 /* heads unloaded, please don't reset port */
518 IDE_DFLAG_PARKED
= (1 << 27),
519 IDE_DFLAG_MEDIA_CHANGED
= (1 << 28),
521 IDE_DFLAG_WP
= (1 << 29),
522 IDE_DFLAG_FORMAT_IN_PROGRESS
= (1 << 30),
523 IDE_DFLAG_NIEN_QUIRK
= (1 << 31),
527 char name
[4]; /* drive name, such as "hda" */
528 char driver_req
[10]; /* requests specific driver */
530 struct request_queue
*queue
; /* request queue */
532 struct request
*rq
; /* current request */
533 void *driver_data
; /* extra driver data */
534 u16
*id
; /* identification info */
535 #ifdef CONFIG_IDE_PROC_FS
536 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
537 const struct ide_proc_devset
*settings
; /* /proc/ide/ drive settings */
539 struct hwif_s
*hwif
; /* actually (ide_hwif_t *) */
541 const struct ide_disk_ops
*disk_ops
;
543 unsigned long dev_flags
;
545 unsigned long sleep
; /* sleep until this time */
546 unsigned long timeout
; /* max time to wait for irq */
548 u8 special_flags
; /* special action flags */
550 u8 select
; /* basic drive/head select reg value */
551 u8 retry_pio
; /* retrying dma capable host in pio */
552 u8 waiting_for_dma
; /* dma currently in progress */
553 u8 dma
; /* atapi dma flag */
555 u8 init_speed
; /* transfer rate set at boot */
556 u8 current_speed
; /* current transfer rate set */
557 u8 desired_speed
; /* desired transfer rate set */
558 u8 pio_mode
; /* for ->set_pio_mode _only_ */
559 u8 dma_mode
; /* for ->set_dma_mode _only_ */
560 u8 dn
; /* now wide spread use */
561 u8 acoustic
; /* acoustic management */
562 u8 media
; /* disk, cdrom, tape, floppy, ... */
563 u8 ready_stat
; /* min status value for drive ready */
564 u8 mult_count
; /* current multiple sector setting */
565 u8 mult_req
; /* requested multiple sector setting */
566 u8 io_32bit
; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
567 u8 bad_wstat
; /* used for ignoring ATA_DF */
568 u8 head
; /* "real" number of heads */
569 u8 sect
; /* "real" sectors per track */
570 u8 bios_head
; /* BIOS/fdisk/LILO number of heads */
571 u8 bios_sect
; /* BIOS/fdisk/LILO sectors per track */
573 /* delay this long before sending packet command */
576 unsigned int bios_cyl
; /* BIOS/fdisk/LILO number of cyls */
577 unsigned int cyl
; /* "real" number of cyls */
578 void *drive_data
; /* used by set_pio_mode/dev_select() */
579 unsigned int failures
; /* current failure count */
580 unsigned int max_failures
; /* maximum allowed failure count */
581 u64 probed_capacity
;/* initial/native media capacity */
582 u64 capacity64
; /* total number of sectors */
584 int lun
; /* logical unit */
585 int crc_count
; /* crc counter to reduce drive speed */
587 unsigned long debug_mask
; /* debugging levels switch */
589 #ifdef CONFIG_BLK_DEV_IDEACPI
590 struct ide_acpi_drive_link
*acpidata
;
592 struct list_head list
;
593 struct device gendev
;
594 struct completion gendev_rel_comp
; /* to deal with device release() */
596 /* current packet command */
597 struct ide_atapi_pc
*pc
;
599 /* last failed packet command */
600 struct ide_atapi_pc
*failed_pc
;
602 /* callback for packet commands */
603 int (*pc_callback
)(struct ide_drive_s
*, int);
605 ide_startstop_t (*irq_handler
)(struct ide_drive_s
*);
607 unsigned long atapi_flags
;
609 struct ide_atapi_pc request_sense_pc
;
611 /* current sense rq and buffer */
613 struct request
*sense_rq
;
614 struct request_sense sense_data
;
617 typedef struct ide_drive_s ide_drive_t
;
619 #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
621 #define to_ide_drv(obj, cont_type) \
622 container_of(obj, struct cont_type, dev)
624 #define ide_drv_g(disk, cont_type) \
625 container_of((disk)->private_data, struct cont_type, driver)
627 struct ide_port_info
;
630 void (*exec_command
)(struct hwif_s
*, u8
);
631 u8 (*read_status
)(struct hwif_s
*);
632 u8 (*read_altstatus
)(struct hwif_s
*);
633 void (*write_devctl
)(struct hwif_s
*, u8
);
635 void (*dev_select
)(ide_drive_t
*);
636 void (*tf_load
)(ide_drive_t
*, struct ide_taskfile
*, u8
);
637 void (*tf_read
)(ide_drive_t
*, struct ide_taskfile
*, u8
);
639 void (*input_data
)(ide_drive_t
*, struct ide_cmd
*,
640 void *, unsigned int);
641 void (*output_data
)(ide_drive_t
*, struct ide_cmd
*,
642 void *, unsigned int);
645 extern const struct ide_tp_ops default_tp_ops
;
648 * struct ide_port_ops - IDE port operations
650 * @init_dev: host specific initialization of a device
651 * @set_pio_mode: routine to program host for PIO mode
652 * @set_dma_mode: routine to program host for DMA mode
653 * @reset_poll: chipset polling based on hba specifics
654 * @pre_reset: chipset specific changes to default for device-hba resets
655 * @resetproc: routine to reset controller after a disk reset
656 * @maskproc: special host masking for drive selection
657 * @quirkproc: check host's drive quirk list
658 * @clear_irq: clear IRQ
660 * @mdma_filter: filter MDMA modes
661 * @udma_filter: filter UDMA modes
663 * @cable_detect: detect cable type
665 struct ide_port_ops
{
666 void (*init_dev
)(ide_drive_t
*);
667 void (*set_pio_mode
)(struct hwif_s
*, ide_drive_t
*);
668 void (*set_dma_mode
)(struct hwif_s
*, ide_drive_t
*);
669 blk_status_t (*reset_poll
)(ide_drive_t
*);
670 void (*pre_reset
)(ide_drive_t
*);
671 void (*resetproc
)(ide_drive_t
*);
672 void (*maskproc
)(ide_drive_t
*, int);
673 void (*quirkproc
)(ide_drive_t
*);
674 void (*clear_irq
)(ide_drive_t
*);
675 int (*test_irq
)(struct hwif_s
*);
677 u8 (*mdma_filter
)(ide_drive_t
*);
678 u8 (*udma_filter
)(ide_drive_t
*);
680 u8 (*cable_detect
)(struct hwif_s
*);
684 void (*dma_host_set
)(struct ide_drive_s
*, int);
685 int (*dma_setup
)(struct ide_drive_s
*, struct ide_cmd
*);
686 void (*dma_start
)(struct ide_drive_s
*);
687 int (*dma_end
)(struct ide_drive_s
*);
688 int (*dma_test_irq
)(struct ide_drive_s
*);
689 void (*dma_lost_irq
)(struct ide_drive_s
*);
690 /* below ones are optional */
691 int (*dma_check
)(struct ide_drive_s
*, struct ide_cmd
*);
692 int (*dma_timer_expiry
)(struct ide_drive_s
*);
693 void (*dma_clear
)(struct ide_drive_s
*);
695 * The following method is optional and only required to be
696 * implemented for the SFF-8038i compatible controllers.
698 u8 (*dma_sff_read_status
)(struct hwif_s
*);
702 IDE_PFLAG_PROBING
= (1 << 0),
707 typedef struct hwif_s
{
708 struct hwif_s
*mate
; /* other hwif from same PCI chip */
709 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
711 struct ide_host
*host
;
713 char name
[6]; /* name of interface, eg. "ide0" */
715 struct ide_io_ports io_ports
;
717 unsigned long sata_scr
[SATA_NR_PORTS
];
719 ide_drive_t
*devices
[MAX_DRIVES
+ 1];
721 unsigned long port_flags
;
723 u8 major
; /* our major number */
724 u8 index
; /* 0 for ide0; 1 for ide1; ... */
725 u8 channel
; /* for dual-port chips: 0=primary, 1=secondary */
735 u8 cbl
; /* cable type */
737 hwif_chipset_t chipset
; /* sub-module for tuning.. */
741 void (*rw_disk
)(ide_drive_t
*, struct request
*);
743 const struct ide_tp_ops
*tp_ops
;
744 const struct ide_port_ops
*port_ops
;
745 const struct ide_dma_ops
*dma_ops
;
747 /* dma physical region descriptor table (cpu view) */
748 unsigned int *dmatable_cpu
;
749 /* dma physical region descriptor table (dma view) */
750 dma_addr_t dmatable_dma
;
752 /* maximum number of PRD table entries */
754 /* PRD entry size in bytes */
757 /* Scatter-gather list used to build the above */
758 struct scatterlist
*sg_table
;
759 int sg_max_nents
; /* Maximum number of entries in it */
761 struct ide_cmd cmd
; /* current command */
763 int rqsize
; /* max sectors per request */
764 int irq
; /* our irq number */
766 unsigned long dma_base
; /* base addr for dma ports */
768 unsigned long config_data
; /* for use by chipset-specific code */
769 unsigned long select_data
; /* for use by chipset-specific code */
771 unsigned long extra_base
; /* extra addr for dma ports */
772 unsigned extra_ports
; /* number of extra dma ports */
774 unsigned present
: 1; /* this interface exists */
775 unsigned busy
: 1; /* serializes devices on a port */
777 struct device gendev
;
778 struct device
*portdev
;
780 struct completion gendev_rel_comp
; /* To deal with device release() */
782 void *hwif_data
; /* extra hwif data */
784 #ifdef CONFIG_BLK_DEV_IDEACPI
785 struct ide_acpi_hwif_link
*acpidata
;
788 /* IRQ handler, if active */
789 ide_startstop_t (*handler
)(ide_drive_t
*);
791 /* BOOL: polling active & poll_timeout field valid */
792 unsigned int polling
: 1;
795 ide_drive_t
*cur_dev
;
797 /* current request */
801 struct timer_list timer
;
802 /* timeout value during long polls */
803 unsigned long poll_timeout
;
804 /* queried upon timeouts */
805 int (*expiry
)(ide_drive_t
*);
811 } ____cacheline_internodealigned_in_smp ide_hwif_t
;
813 #define MAX_HOST_PORTS 4
816 ide_hwif_t
*ports
[MAX_HOST_PORTS
+ 1];
817 unsigned int n_ports
;
818 struct device
*dev
[2];
820 int (*init_chipset
)(struct pci_dev
*);
822 void (*get_lock
)(irq_handler_t
, void *);
823 void (*release_lock
)(void);
825 irq_handler_t irq_handler
;
827 unsigned long host_flags
;
832 ide_hwif_t
*cur_port
; /* for hosts requiring serialization */
834 /* used for hosts requiring serialization */
835 volatile unsigned long host_busy
;
838 #define IDE_HOST_BUSY 0
841 * internal ide interrupt handler type
843 typedef ide_startstop_t (ide_handler_t
)(ide_drive_t
*);
844 typedef int (ide_expiry_t
)(ide_drive_t
*);
846 /* used by ide-cd, ide-floppy, etc. */
847 typedef void (xfer_func_t
)(ide_drive_t
*, struct ide_cmd
*, void *, unsigned);
849 extern struct mutex ide_setting_mtx
;
852 * configurable drive settings
855 #define DS_SYNC (1 << 0)
858 int (*get
)(ide_drive_t
*);
859 int (*set
)(ide_drive_t
*, int);
863 #define __DEVSET(_flags, _get, _set) { \
869 #define ide_devset_get(name, field) \
870 static int get_##name(ide_drive_t *drive) \
872 return drive->field; \
875 #define ide_devset_set(name, field) \
876 static int set_##name(ide_drive_t *drive, int arg) \
878 drive->field = arg; \
882 #define ide_devset_get_flag(name, flag) \
883 static int get_##name(ide_drive_t *drive) \
885 return !!(drive->dev_flags & flag); \
888 #define ide_devset_set_flag(name, flag) \
889 static int set_##name(ide_drive_t *drive, int arg) \
892 drive->dev_flags |= flag; \
894 drive->dev_flags &= ~flag; \
898 #define __IDE_DEVSET(_name, _flags, _get, _set) \
899 const struct ide_devset ide_devset_##_name = \
900 __DEVSET(_flags, _get, _set)
902 #define IDE_DEVSET(_name, _flags, _get, _set) \
903 static __IDE_DEVSET(_name, _flags, _get, _set)
905 #define ide_devset_rw(_name, _func) \
906 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
908 #define ide_devset_w(_name, _func) \
909 IDE_DEVSET(_name, 0, NULL, set_##_func)
911 #define ide_ext_devset_rw(_name, _func) \
912 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
914 #define ide_ext_devset_rw_sync(_name, _func) \
915 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
917 #define ide_decl_devset(_name) \
918 extern const struct ide_devset ide_devset_##_name
920 ide_decl_devset(io_32bit
);
921 ide_decl_devset(keepsettings
);
922 ide_decl_devset(pio_mode
);
923 ide_decl_devset(unmaskirq
);
924 ide_decl_devset(using_dma
);
926 #ifdef CONFIG_IDE_PROC_FS
928 * /proc/ide interface
931 #define ide_devset_rw_field(_name, _field) \
932 ide_devset_get(_name, _field); \
933 ide_devset_set(_name, _field); \
934 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
936 #define ide_devset_rw_flag(_name, _field) \
937 ide_devset_get_flag(_name, _field); \
938 ide_devset_set_flag(_name, _field); \
939 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
941 struct ide_proc_devset
{
943 const struct ide_devset
*setting
;
945 int (*mulf
)(ide_drive_t
*);
946 int (*divf
)(ide_drive_t
*);
949 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
950 .name = __stringify(_name), \
951 .setting = &ide_devset_##_name, \
958 #define IDE_PROC_DEVSET(_name, _min, _max) \
959 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
964 int (*show
)(struct seq_file
*, void *);
967 void proc_ide_create(void);
968 void proc_ide_destroy(void);
969 void ide_proc_register_port(ide_hwif_t
*);
970 void ide_proc_port_register_devices(ide_hwif_t
*);
971 void ide_proc_unregister_device(ide_drive_t
*);
972 void ide_proc_unregister_port(ide_hwif_t
*);
973 void ide_proc_register_driver(ide_drive_t
*, struct ide_driver
*);
974 void ide_proc_unregister_driver(ide_drive_t
*, struct ide_driver
*);
976 int ide_capacity_proc_show(struct seq_file
*m
, void *v
);
977 int ide_geometry_proc_show(struct seq_file
*m
, void *v
);
979 static inline void proc_ide_create(void) { ; }
980 static inline void proc_ide_destroy(void) { ; }
981 static inline void ide_proc_register_port(ide_hwif_t
*hwif
) { ; }
982 static inline void ide_proc_port_register_devices(ide_hwif_t
*hwif
) { ; }
983 static inline void ide_proc_unregister_device(ide_drive_t
*drive
) { ; }
984 static inline void ide_proc_unregister_port(ide_hwif_t
*hwif
) { ; }
985 static inline void ide_proc_register_driver(ide_drive_t
*drive
,
986 struct ide_driver
*driver
) { ; }
987 static inline void ide_proc_unregister_driver(ide_drive_t
*drive
,
988 struct ide_driver
*driver
) { ; }
992 /* enter/exit functions */
993 IDE_DBG_FUNC
= (1 << 0),
994 /* sense key/asc handling */
995 IDE_DBG_SENSE
= (1 << 1),
996 /* packet commands handling */
997 IDE_DBG_PC
= (1 << 2),
998 /* request handling */
999 IDE_DBG_RQ
= (1 << 3),
1000 /* driver probing/setup */
1001 IDE_DBG_PROBE
= (1 << 4),
1004 /* DRV_NAME has to be defined in the driver before using the macro below */
1005 #define __ide_debug_log(lvl, fmt, args...) \
1007 if (unlikely(drive->debug_mask & lvl)) \
1008 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
1009 __func__, ## args); \
1013 * Power Management state machine (rq->pm->pm_step).
1015 * For each step, the core calls ide_start_power_step() first.
1017 * - ide_stopped : In this case, the core calls us back again unless
1018 * step have been set to ide_power_state_completed.
1019 * - ide_started : In this case, the channel is left busy until an
1020 * async event (interrupt) occurs.
1021 * Typically, ide_start_power_step() will issue a taskfile request with
1024 * Upon reception of the interrupt, the core will call ide_complete_power_step()
1025 * with the error code if any. This routine should update the step value
1026 * and return. It should not start a new request. The core will call
1027 * ide_start_power_step() for the new step value, unless step have been
1028 * set to IDE_PM_COMPLETED.
1031 IDE_PM_START_SUSPEND
,
1032 IDE_PM_FLUSH_CACHE
= IDE_PM_START_SUSPEND
,
1035 IDE_PM_START_RESUME
,
1036 IDE_PM_RESTORE_PIO
= IDE_PM_START_RESUME
,
1043 int generic_ide_suspend(struct device
*, pm_message_t
);
1044 int generic_ide_resume(struct device
*);
1046 void ide_complete_power_step(ide_drive_t
*, struct request
*);
1047 ide_startstop_t
ide_start_power_step(ide_drive_t
*, struct request
*);
1048 void ide_complete_pm_rq(ide_drive_t
*, struct request
*);
1049 void ide_check_pm_state(ide_drive_t
*, struct request
*);
1052 * Subdrivers support.
1054 * The gendriver.owner field should be set to the module owner of this driver.
1055 * The gendriver.name field should be set to the name of this driver
1058 const char *version
;
1059 ide_startstop_t (*do_request
)(ide_drive_t
*, struct request
*, sector_t
);
1060 struct device_driver gen_driver
;
1061 int (*probe
)(ide_drive_t
*);
1062 void (*remove
)(ide_drive_t
*);
1063 void (*resume
)(ide_drive_t
*);
1064 void (*shutdown
)(ide_drive_t
*);
1065 #ifdef CONFIG_IDE_PROC_FS
1066 ide_proc_entry_t
* (*proc_entries
)(ide_drive_t
*);
1067 const struct ide_proc_devset
* (*proc_devsets
)(ide_drive_t
*);
1071 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1073 int ide_device_get(ide_drive_t
*);
1074 void ide_device_put(ide_drive_t
*);
1076 struct ide_ioctl_devset
{
1077 unsigned int get_ioctl
;
1078 unsigned int set_ioctl
;
1079 const struct ide_devset
*setting
;
1082 int ide_setting_ioctl(ide_drive_t
*, struct block_device
*, unsigned int,
1083 unsigned long, const struct ide_ioctl_devset
*);
1085 int generic_ide_ioctl(ide_drive_t
*, struct block_device
*, unsigned, unsigned long);
1087 extern int ide_vlb_clk
;
1088 extern int ide_pci_clk
;
1090 int ide_end_rq(ide_drive_t
*, struct request
*, blk_status_t
, unsigned int);
1091 void ide_kill_rq(ide_drive_t
*, struct request
*);
1093 void __ide_set_handler(ide_drive_t
*, ide_handler_t
*, unsigned int);
1094 void ide_set_handler(ide_drive_t
*, ide_handler_t
*, unsigned int);
1096 void ide_execute_command(ide_drive_t
*, struct ide_cmd
*, ide_handler_t
*,
1099 void ide_pad_transfer(ide_drive_t
*, int, int);
1101 ide_startstop_t
ide_error(ide_drive_t
*, const char *, u8
);
1103 void ide_fix_driveid(u16
*);
1105 extern void ide_fixstring(u8
*, const int, const int);
1107 int ide_busy_sleep(ide_drive_t
*, unsigned long, int);
1109 int __ide_wait_stat(ide_drive_t
*, u8
, u8
, unsigned long, u8
*);
1110 int ide_wait_stat(ide_startstop_t
*, ide_drive_t
*, u8
, u8
, unsigned long);
1112 ide_startstop_t
ide_do_park_unpark(ide_drive_t
*, struct request
*);
1113 ide_startstop_t
ide_do_devset(ide_drive_t
*, struct request
*);
1115 extern ide_startstop_t
ide_do_reset (ide_drive_t
*);
1117 extern int ide_devset_execute(ide_drive_t
*drive
,
1118 const struct ide_devset
*setting
, int arg
);
1120 void ide_complete_cmd(ide_drive_t
*, struct ide_cmd
*, u8
, u8
);
1121 int ide_complete_rq(ide_drive_t
*, blk_status_t
, unsigned int);
1123 void ide_tf_readback(ide_drive_t
*drive
, struct ide_cmd
*cmd
);
1124 void ide_tf_dump(const char *, struct ide_cmd
*);
1126 void ide_exec_command(ide_hwif_t
*, u8
);
1127 u8
ide_read_status(ide_hwif_t
*);
1128 u8
ide_read_altstatus(ide_hwif_t
*);
1129 void ide_write_devctl(ide_hwif_t
*, u8
);
1131 void ide_dev_select(ide_drive_t
*);
1132 void ide_tf_load(ide_drive_t
*, struct ide_taskfile
*, u8
);
1133 void ide_tf_read(ide_drive_t
*, struct ide_taskfile
*, u8
);
1135 void ide_input_data(ide_drive_t
*, struct ide_cmd
*, void *, unsigned int);
1136 void ide_output_data(ide_drive_t
*, struct ide_cmd
*, void *, unsigned int);
1138 void SELECT_MASK(ide_drive_t
*, int);
1140 u8
ide_read_error(ide_drive_t
*);
1141 void ide_read_bcount_and_ireason(ide_drive_t
*, u16
*, u8
*);
1143 int ide_check_ireason(ide_drive_t
*, struct request
*, int, int, int);
1145 int ide_check_atapi_device(ide_drive_t
*, const char *);
1147 void ide_init_pc(struct ide_atapi_pc
*);
1149 /* Disk head parking */
1150 extern wait_queue_head_t ide_park_wq
;
1151 ssize_t
ide_park_show(struct device
*dev
, struct device_attribute
*attr
,
1153 ssize_t
ide_park_store(struct device
*dev
, struct device_attribute
*attr
,
1154 const char *buf
, size_t len
);
1157 * Special requests for ide-tape block device strategy routine.
1159 * In order to service a character device command, we add special requests to
1160 * the tail of our block device request queue and wait for their completion.
1163 REQ_IDETAPE_PC1
= (1 << 0), /* packet command (first stage) */
1164 REQ_IDETAPE_PC2
= (1 << 1), /* packet command (second stage) */
1165 REQ_IDETAPE_READ
= (1 << 2),
1166 REQ_IDETAPE_WRITE
= (1 << 3),
1169 int ide_queue_pc_tail(ide_drive_t
*, struct gendisk
*, struct ide_atapi_pc
*,
1170 void *, unsigned int);
1172 int ide_do_test_unit_ready(ide_drive_t
*, struct gendisk
*);
1173 int ide_do_start_stop(ide_drive_t
*, struct gendisk
*, int);
1174 int ide_set_media_lock(ide_drive_t
*, struct gendisk
*, int);
1175 void ide_create_request_sense_cmd(ide_drive_t
*, struct ide_atapi_pc
*);
1176 void ide_retry_pc(ide_drive_t
*drive
);
1178 void ide_prep_sense(ide_drive_t
*drive
, struct request
*rq
);
1179 int ide_queue_sense_rq(ide_drive_t
*drive
, void *special
);
1181 int ide_cd_expiry(ide_drive_t
*);
1183 int ide_cd_get_xferlen(struct request
*);
1185 ide_startstop_t
ide_issue_pc(ide_drive_t
*, struct ide_cmd
*);
1187 ide_startstop_t
do_rw_taskfile(ide_drive_t
*, struct ide_cmd
*);
1189 void ide_pio_bytes(ide_drive_t
*, struct ide_cmd
*, unsigned int, unsigned int);
1191 void ide_finish_cmd(ide_drive_t
*, struct ide_cmd
*, u8
);
1193 int ide_raw_taskfile(ide_drive_t
*, struct ide_cmd
*, u8
*, u16
);
1194 int ide_no_data_taskfile(ide_drive_t
*, struct ide_cmd
*);
1196 int ide_taskfile_ioctl(ide_drive_t
*, unsigned long);
1198 int ide_dev_read_id(ide_drive_t
*, u8
, u16
*, int);
1200 extern int ide_driveid_update(ide_drive_t
*);
1201 extern int ide_config_drive_speed(ide_drive_t
*, u8
);
1202 extern u8
eighty_ninty_three (ide_drive_t
*);
1203 extern int taskfile_lib_get_identify(ide_drive_t
*drive
, u8
*);
1205 extern int ide_wait_not_busy(ide_hwif_t
*hwif
, unsigned long timeout
);
1207 extern void ide_stall_queue(ide_drive_t
*drive
, unsigned long timeout
);
1209 extern void ide_timer_expiry(struct timer_list
*t
);
1210 extern irqreturn_t
ide_intr(int irq
, void *dev_id
);
1211 extern void do_ide_request(struct request_queue
*);
1212 extern void ide_requeue_and_plug(ide_drive_t
*drive
, struct request
*rq
);
1214 void ide_init_disk(struct gendisk
*, ide_drive_t
*);
1216 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1217 extern int __ide_pci_register_driver(struct pci_driver
*driver
, struct module
*owner
, const char *mod_name
);
1218 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1220 #define ide_pci_register_driver(d) pci_register_driver(d)
1223 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev
*dev
)
1225 if ((dev
->class >> 8) == PCI_CLASS_STORAGE_IDE
&& (dev
->class & 5) != 5)
1230 void ide_pci_setup_ports(struct pci_dev
*, const struct ide_port_info
*,
1231 struct ide_hw
*, struct ide_hw
**);
1232 void ide_setup_pci_noise(struct pci_dev
*, const struct ide_port_info
*);
1234 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1235 int ide_pci_set_master(struct pci_dev
*, const char *);
1236 unsigned long ide_pci_dma_base(ide_hwif_t
*, const struct ide_port_info
*);
1237 int ide_pci_check_simplex(ide_hwif_t
*, const struct ide_port_info
*);
1238 int ide_hwif_setup_dma(ide_hwif_t
*, const struct ide_port_info
*);
1240 static inline int ide_hwif_setup_dma(ide_hwif_t
*hwif
,
1241 const struct ide_port_info
*d
)
1247 struct ide_pci_enablebit
{
1248 u8 reg
; /* byte pci reg holding the enable-bit */
1249 u8 mask
; /* mask to isolate the enable-bit */
1250 u8 val
; /* value of masked reg when "enabled" */
1254 /* Uses ISA control ports not PCI ones. */
1255 IDE_HFLAG_ISA_PORTS
= (1 << 0),
1256 /* single port device */
1257 IDE_HFLAG_SINGLE
= (1 << 1),
1258 /* don't use legacy PIO blacklist */
1259 IDE_HFLAG_PIO_NO_BLACKLIST
= (1 << 2),
1260 /* set for the second port of QD65xx */
1261 IDE_HFLAG_QD_2ND_PORT
= (1 << 3),
1262 /* use PIO8/9 for prefetch off/on */
1263 IDE_HFLAG_ABUSE_PREFETCH
= (1 << 4),
1264 /* use PIO6/7 for fast-devsel off/on */
1265 IDE_HFLAG_ABUSE_FAST_DEVSEL
= (1 << 5),
1266 /* use 100-102 and 200-202 PIO values to set DMA modes */
1267 IDE_HFLAG_ABUSE_DMA_MODES
= (1 << 6),
1269 * keep DMA setting when programming PIO mode, may be used only
1270 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1272 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA
= (1 << 7),
1273 /* program host for the transfer mode after programming device */
1274 IDE_HFLAG_POST_SET_MODE
= (1 << 8),
1275 /* don't program host/device for the transfer mode ("smart" hosts) */
1276 IDE_HFLAG_NO_SET_MODE
= (1 << 9),
1277 /* trust BIOS for programming chipset/device for DMA */
1278 IDE_HFLAG_TRUST_BIOS_FOR_DMA
= (1 << 10),
1279 /* host is CS5510/CS5520 */
1280 IDE_HFLAG_CS5520
= (1 << 11),
1281 /* ATAPI DMA is unsupported */
1282 IDE_HFLAG_NO_ATAPI_DMA
= (1 << 12),
1283 /* set if host is a "non-bootable" controller */
1284 IDE_HFLAG_NON_BOOTABLE
= (1 << 13),
1285 /* host doesn't support DMA */
1286 IDE_HFLAG_NO_DMA
= (1 << 14),
1287 /* check if host is PCI IDE device before allowing DMA */
1288 IDE_HFLAG_NO_AUTODMA
= (1 << 15),
1289 /* host uses MMIO */
1290 IDE_HFLAG_MMIO
= (1 << 16),
1292 IDE_HFLAG_NO_LBA48
= (1 << 17),
1294 IDE_HFLAG_NO_LBA48_DMA
= (1 << 18),
1295 /* data FIFO is cleared by an error */
1296 IDE_HFLAG_ERROR_STOPS_FIFO
= (1 << 19),
1297 /* serialize ports */
1298 IDE_HFLAG_SERIALIZE
= (1 << 20),
1299 /* host is DTC2278 */
1300 IDE_HFLAG_DTC2278
= (1 << 21),
1301 /* 4 devices on a single set of I/O ports */
1302 IDE_HFLAG_4DRIVES
= (1 << 22),
1303 /* host is TRM290 */
1304 IDE_HFLAG_TRM290
= (1 << 23),
1305 /* use 32-bit I/O ops */
1306 IDE_HFLAG_IO_32BIT
= (1 << 24),
1308 IDE_HFLAG_UNMASK_IRQS
= (1 << 25),
1309 IDE_HFLAG_BROKEN_ALTSTATUS
= (1 << 26),
1310 /* serialize ports if DMA is possible (for sl82c105) */
1311 IDE_HFLAG_SERIALIZE_DMA
= (1 << 27),
1312 /* force host out of "simplex" mode */
1313 IDE_HFLAG_CLEAR_SIMPLEX
= (1 << 28),
1314 /* DSC overlap is unsupported */
1315 IDE_HFLAG_NO_DSC
= (1 << 29),
1316 /* never use 32-bit I/O ops */
1317 IDE_HFLAG_NO_IO_32BIT
= (1 << 30),
1318 /* never unmask IRQs */
1319 IDE_HFLAG_NO_UNMASK_IRQS
= (1 << 31),
1322 #ifdef CONFIG_BLK_DEV_OFFBOARD
1323 # define IDE_HFLAG_OFF_BOARD 0
1325 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1328 struct ide_port_info
{
1331 int (*init_chipset
)(struct pci_dev
*);
1333 void (*get_lock
)(irq_handler_t
, void *);
1334 void (*release_lock
)(void);
1336 void (*init_iops
)(ide_hwif_t
*);
1337 void (*init_hwif
)(ide_hwif_t
*);
1338 int (*init_dma
)(ide_hwif_t
*,
1339 const struct ide_port_info
*);
1341 const struct ide_tp_ops
*tp_ops
;
1342 const struct ide_port_ops
*port_ops
;
1343 const struct ide_dma_ops
*dma_ops
;
1345 struct ide_pci_enablebit enablebits
[2];
1347 hwif_chipset_t chipset
;
1349 u16 max_sectors
; /* if < than the default one */
1362 * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME
1365 struct ide_pm_state
{
1366 /* PM state machine step value, currently driver specific */
1368 /* requested PM state value (S1, S2, S3, S4, ...) */
1370 void* data
; /* for driver use */
1374 int ide_pci_init_one(struct pci_dev
*, const struct ide_port_info
*, void *);
1375 int ide_pci_init_two(struct pci_dev
*, struct pci_dev
*,
1376 const struct ide_port_info
*, void *);
1377 void ide_pci_remove(struct pci_dev
*);
1380 int ide_pci_suspend(struct pci_dev
*, pm_message_t
);
1381 int ide_pci_resume(struct pci_dev
*);
1383 #define ide_pci_suspend NULL
1384 #define ide_pci_resume NULL
1387 void ide_map_sg(ide_drive_t
*, struct ide_cmd
*);
1388 void ide_init_sg_cmd(struct ide_cmd
*, unsigned int);
1390 #define BAD_DMA_DRIVE 0
1391 #define GOOD_DMA_DRIVE 1
1393 struct drive_list_entry
{
1394 const char *id_model
;
1395 const char *id_firmware
;
1398 int ide_in_drive_list(u16
*, const struct drive_list_entry
*);
1400 #ifdef CONFIG_BLK_DEV_IDEDMA
1401 int ide_dma_good_drive(ide_drive_t
*);
1402 int __ide_dma_bad_drive(ide_drive_t
*);
1404 u8
ide_find_dma_mode(ide_drive_t
*, u8
);
1406 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
)
1408 return ide_find_dma_mode(drive
, XFER_UDMA_6
);
1411 void ide_dma_off_quietly(ide_drive_t
*);
1412 void ide_dma_off(ide_drive_t
*);
1413 void ide_dma_on(ide_drive_t
*);
1414 int ide_set_dma(ide_drive_t
*);
1415 void ide_check_dma_crc(ide_drive_t
*);
1416 ide_startstop_t
ide_dma_intr(ide_drive_t
*);
1418 int ide_allocate_dma_engine(ide_hwif_t
*);
1419 void ide_release_dma_engine(ide_hwif_t
*);
1421 int ide_dma_prepare(ide_drive_t
*, struct ide_cmd
*);
1422 void ide_dma_unmap_sg(ide_drive_t
*, struct ide_cmd
*);
1424 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1425 int config_drive_for_dma(ide_drive_t
*);
1426 int ide_build_dmatable(ide_drive_t
*, struct ide_cmd
*);
1427 void ide_dma_host_set(ide_drive_t
*, int);
1428 int ide_dma_setup(ide_drive_t
*, struct ide_cmd
*);
1429 extern void ide_dma_start(ide_drive_t
*);
1430 int ide_dma_end(ide_drive_t
*);
1431 int ide_dma_test_irq(ide_drive_t
*);
1432 int ide_dma_sff_timer_expiry(ide_drive_t
*);
1433 u8
ide_dma_sff_read_status(ide_hwif_t
*);
1434 extern const struct ide_dma_ops sff_dma_ops
;
1436 static inline int config_drive_for_dma(ide_drive_t
*drive
) { return 0; }
1437 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1439 void ide_dma_lost_irq(ide_drive_t
*);
1440 ide_startstop_t
ide_dma_timeout_retry(ide_drive_t
*, int);
1443 static inline u8
ide_find_dma_mode(ide_drive_t
*drive
, u8 speed
) { return 0; }
1444 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
) { return 0; }
1445 static inline void ide_dma_off_quietly(ide_drive_t
*drive
) { ; }
1446 static inline void ide_dma_off(ide_drive_t
*drive
) { ; }
1447 static inline void ide_dma_on(ide_drive_t
*drive
) { ; }
1448 static inline void ide_dma_verbose(ide_drive_t
*drive
) { ; }
1449 static inline int ide_set_dma(ide_drive_t
*drive
) { return 1; }
1450 static inline void ide_check_dma_crc(ide_drive_t
*drive
) { ; }
1451 static inline ide_startstop_t
ide_dma_intr(ide_drive_t
*drive
) { return ide_stopped
; }
1452 static inline ide_startstop_t
ide_dma_timeout_retry(ide_drive_t
*drive
, int error
) { return ide_stopped
; }
1453 static inline void ide_release_dma_engine(ide_hwif_t
*hwif
) { ; }
1454 static inline int ide_dma_prepare(ide_drive_t
*drive
,
1455 struct ide_cmd
*cmd
) { return 1; }
1456 static inline void ide_dma_unmap_sg(ide_drive_t
*drive
,
1457 struct ide_cmd
*cmd
) { ; }
1458 #endif /* CONFIG_BLK_DEV_IDEDMA */
1460 #ifdef CONFIG_BLK_DEV_IDEACPI
1461 int ide_acpi_init(void);
1462 bool ide_port_acpi(ide_hwif_t
*hwif
);
1463 extern int ide_acpi_exec_tfs(ide_drive_t
*drive
);
1464 extern void ide_acpi_get_timing(ide_hwif_t
*hwif
);
1465 extern void ide_acpi_push_timing(ide_hwif_t
*hwif
);
1466 void ide_acpi_init_port(ide_hwif_t
*);
1467 void ide_acpi_port_init_devices(ide_hwif_t
*);
1468 extern void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
);
1470 static inline int ide_acpi_init(void) { return 0; }
1471 static inline bool ide_port_acpi(ide_hwif_t
*hwif
) { return 0; }
1472 static inline int ide_acpi_exec_tfs(ide_drive_t
*drive
) { return 0; }
1473 static inline void ide_acpi_get_timing(ide_hwif_t
*hwif
) { ; }
1474 static inline void ide_acpi_push_timing(ide_hwif_t
*hwif
) { ; }
1475 static inline void ide_acpi_init_port(ide_hwif_t
*hwif
) { ; }
1476 static inline void ide_acpi_port_init_devices(ide_hwif_t
*hwif
) { ; }
1477 static inline void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
) {}
1480 void ide_register_region(struct gendisk
*);
1481 void ide_unregister_region(struct gendisk
*);
1483 void ide_check_nien_quirk_list(ide_drive_t
*);
1484 void ide_undecoded_slave(ide_drive_t
*);
1486 void ide_port_apply_params(ide_hwif_t
*);
1487 int ide_sysfs_register_port(ide_hwif_t
*);
1489 struct ide_host
*ide_host_alloc(const struct ide_port_info
*, struct ide_hw
**,
1491 void ide_host_free(struct ide_host
*);
1492 int ide_host_register(struct ide_host
*, const struct ide_port_info
*,
1494 int ide_host_add(const struct ide_port_info
*, struct ide_hw
**, unsigned int,
1495 struct ide_host
**);
1496 void ide_host_remove(struct ide_host
*);
1497 int ide_legacy_device_add(const struct ide_port_info
*, unsigned long);
1498 void ide_port_unregister_devices(ide_hwif_t
*);
1499 void ide_port_scan(ide_hwif_t
*);
1501 static inline void *ide_get_hwifdata (ide_hwif_t
* hwif
)
1503 return hwif
->hwif_data
;
1506 static inline void ide_set_hwifdata (ide_hwif_t
* hwif
, void *data
)
1508 hwif
->hwif_data
= data
;
1511 u64
ide_get_lba_addr(struct ide_cmd
*, int);
1512 u8
ide_dump_status(ide_drive_t
*, const char *, u8
);
1517 u16 act8b
; /* t2 for 8-bit io */
1518 u16 rec8b
; /* t2i for 8-bit io */
1519 u16 cyc8b
; /* t0 for 8-bit io */
1520 u16 active
; /* t2 or tD */
1521 u16 recover
; /* t2i or tK */
1523 u16 udma
; /* t2CYCTYP/2 */
1527 IDE_TIMING_SETUP
= (1 << 0),
1528 IDE_TIMING_ACT8B
= (1 << 1),
1529 IDE_TIMING_REC8B
= (1 << 2),
1530 IDE_TIMING_CYC8B
= (1 << 3),
1531 IDE_TIMING_8BIT
= IDE_TIMING_ACT8B
| IDE_TIMING_REC8B
|
1533 IDE_TIMING_ACTIVE
= (1 << 4),
1534 IDE_TIMING_RECOVER
= (1 << 5),
1535 IDE_TIMING_CYCLE
= (1 << 6),
1536 IDE_TIMING_UDMA
= (1 << 7),
1537 IDE_TIMING_ALL
= IDE_TIMING_SETUP
| IDE_TIMING_8BIT
|
1538 IDE_TIMING_ACTIVE
| IDE_TIMING_RECOVER
|
1539 IDE_TIMING_CYCLE
| IDE_TIMING_UDMA
,
1542 struct ide_timing
*ide_timing_find_mode(u8
);
1543 u16
ide_pio_cycle_time(ide_drive_t
*, u8
);
1544 void ide_timing_merge(struct ide_timing
*, struct ide_timing
*,
1545 struct ide_timing
*, unsigned int);
1546 int ide_timing_compute(ide_drive_t
*, u8
, struct ide_timing
*, int, int);
1548 #ifdef CONFIG_IDE_XFER_MODE
1549 int ide_scan_pio_blacklist(char *);
1550 const char *ide_xfer_verbose(u8
);
1551 int ide_pio_need_iordy(ide_drive_t
*, const u8
);
1552 int ide_set_pio_mode(ide_drive_t
*, u8
);
1553 int ide_set_dma_mode(ide_drive_t
*, u8
);
1554 void ide_set_pio(ide_drive_t
*, u8
);
1555 int ide_set_xfer_rate(ide_drive_t
*, u8
);
1557 static inline void ide_set_pio(ide_drive_t
*drive
, u8 pio
) { ; }
1558 static inline int ide_set_xfer_rate(ide_drive_t
*drive
, u8 rate
) { return -1; }
1561 static inline void ide_set_max_pio(ide_drive_t
*drive
)
1563 ide_set_pio(drive
, 255);
1566 char *ide_media_string(ide_drive_t
*);
1568 extern const struct attribute_group
*ide_dev_groups
[];
1569 extern struct bus_type ide_bus_type
;
1570 extern struct class *ide_port_class
;
1572 static inline void ide_dump_identify(u8
*id
)
1574 print_hex_dump(KERN_INFO
, "", DUMP_PREFIX_NONE
, 16, 2, id
, 512, 0);
1577 static inline int hwif_to_node(ide_hwif_t
*hwif
)
1579 return hwif
->dev
? dev_to_node(hwif
->dev
) : -1;
1582 static inline ide_drive_t
*ide_get_pair_dev(ide_drive_t
*drive
)
1584 ide_drive_t
*peer
= drive
->hwif
->devices
[(drive
->dn
^ 1) & 1];
1586 return (peer
->dev_flags
& IDE_DFLAG_PRESENT
) ? peer
: NULL
;
1589 static inline void *ide_get_drivedata(ide_drive_t
*drive
)
1591 return drive
->drive_data
;
1594 static inline void ide_set_drivedata(ide_drive_t
*drive
, void *data
)
1596 drive
->drive_data
= data
;
1599 #define ide_port_for_each_dev(i, dev, port) \
1600 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1602 #define ide_port_for_each_present_dev(i, dev, port) \
1603 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1604 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1606 #define ide_host_for_each_port(i, port, host) \
1607 for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)