include/linux/iio/common/st_sensors.h

   1 /*
   2  * STMicroelectronics sensors library driver
   3  *
   4  * Copyright 2012-2013 STMicroelectronics Inc.
   5  *
   6  * Denis Ciocca <denis.ciocca@st.com>
   7  *
   8  * Licensed under the GPL-2.
   9  */
  10
  11 #ifndef ST_SENSORS_H
  12 #define ST_SENSORS_H
  13
  14 #include <linux/i2c.h>
  15 #include <linux/spi/spi.h>
  16 #include <linux/irqreturn.h>
  17 #include <linux/iio/trigger.h>
  18 #include <linux/bitops.h>
  19 #include <linux/regulator/consumer.h>
  20
  21 #include <linux/platform_data/st_sensors_pdata.h>
  22
  23 #define ST_SENSORS_TX_MAX_LENGTH                2
  24 #define ST_SENSORS_RX_MAX_LENGTH                6
  25
  26 #define ST_SENSORS_ODR_LIST_MAX                 10
  27 #define ST_SENSORS_FULLSCALE_AVL_MAX            10
  28
  29 #define ST_SENSORS_NUMBER_ALL_CHANNELS          4
  30 #define ST_SENSORS_ENABLE_ALL_AXIS              0x07
  31 #define ST_SENSORS_SCAN_X                       0
  32 #define ST_SENSORS_SCAN_Y                       1
  33 #define ST_SENSORS_SCAN_Z                       2
  34 #define ST_SENSORS_DEFAULT_POWER_ON_VALUE       0x01
  35 #define ST_SENSORS_DEFAULT_POWER_OFF_VALUE      0x00
  36 #define ST_SENSORS_DEFAULT_WAI_ADDRESS          0x0f
  37 #define ST_SENSORS_DEFAULT_AXIS_ADDR            0x20
  38 #define ST_SENSORS_DEFAULT_AXIS_MASK            0x07
  39 #define ST_SENSORS_DEFAULT_AXIS_N_BIT           3
  40 #define ST_SENSORS_DEFAULT_STAT_ADDR            0x27
  41
  42 #define ST_SENSORS_MAX_NAME                     17
  43 #define ST_SENSORS_MAX_4WAI                     7
  44
  45 #define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
  46                                         ch2, s, endian, rbits, sbits, addr) \
  47 { \
  48         .type = device_type, \
  49         .modified = mod, \
  50         .info_mask_separate = mask, \
  51         .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
  52         .scan_index = index, \
  53         .channel2 = ch2, \
  54         .address = addr, \
  55         .scan_type = { \
  56                 .sign = s, \
  57                 .realbits = rbits, \
  58                 .shift = sbits - rbits, \
  59                 .storagebits = sbits, \
  60                 .endianness = endian, \
  61         }, \
  62 }
  63
  64 #define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
  65                 IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
  66                         st_sensors_sysfs_sampling_frequency_avail)
  67
  68 #define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \
  69                 IIO_DEVICE_ATTR(name, S_IRUGO, \
  70                         st_sensors_sysfs_scale_avail, NULL , 0);
  71
  72 struct st_sensor_odr_avl {
  73         unsigned int hz;
  74         u8 value;
  75 };
  76
  77 struct st_sensor_odr {
  78         u8 addr;
  79         u8 mask;
  80         struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
  81 };
  82
  83 struct st_sensor_power {
  84         u8 addr;
  85         u8 mask;
  86         u8 value_off;
  87         u8 value_on;
  88 };
  89
  90 struct st_sensor_axis {
  91         u8 addr;
  92         u8 mask;
  93 };
  94
  95 struct st_sensor_fullscale_avl {
  96         unsigned int num;
  97         u8 value;
  98         unsigned int gain;
  99         unsigned int gain2;
 100 };
 101
 102 struct st_sensor_fullscale {
 103         u8 addr;
 104         u8 mask;
 105         struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
 106 };
 107
 108 /**
 109  * struct st_sensor_bdu - ST sensor device block data update
 110  * @addr: address of the register.
 111  * @mask: mask to write the block data update flag.
 112  */
 113 struct st_sensor_bdu {
 114         u8 addr;
 115         u8 mask;
 116 };
 117
 118 /**
 119  * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
 120  * @addr: address of the register.
 121  * @mask_int1: mask to enable/disable IRQ on INT1 pin.
 122  * @mask_int2: mask to enable/disable IRQ on INT2 pin.
 123  * @addr_ihl: address to enable/disable active low on the INT lines.
 124  * @mask_ihl: mask to enable/disable active low on the INT lines.
 125  * @addr_od: address to enable/disable Open Drain on the INT lines.
 126  * @mask_od: mask to enable/disable Open Drain on the INT lines.
 127  * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt
 128  * struct ig1 - represents the Interrupt Generator 1 of sensors.
 129  * @en_addr: address of the enable ig1 register.
 130  * @en_mask: mask to write the on/off value for enable.
 131  */
 132 struct st_sensor_data_ready_irq {
 133         u8 addr;
 134         u8 mask_int1;
 135         u8 mask_int2;
 136         u8 addr_ihl;
 137         u8 mask_ihl;
 138         u8 addr_od;
 139         u8 mask_od;
 140         u8 addr_stat_drdy;
 141         struct {
 142                 u8 en_addr;
 143                 u8 en_mask;
 144         } ig1;
 145 };
 146
 147 /**
 148  * struct st_sensor_transfer_buffer - ST sensor device I/O buffer
 149  * @buf_lock: Mutex to protect rx and tx buffers.
 150  * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
 151  *      This buffer is used to avoid DMA not-aligned issue.
 152  * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
 153  *      This buffer is used to avoid DMA not-aligned issue.
 154  */
 155 struct st_sensor_transfer_buffer {
 156         struct mutex buf_lock;
 157         u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH];
 158         u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned;
 159 };
 160
 161 /**
 162  * struct st_sensor_transfer_function - ST sensor device I/O function
 163  * @read_byte: Function used to read one byte.
 164  * @write_byte: Function used to write one byte.
 165  * @read_multiple_byte: Function used to read multiple byte.
 166  */
 167 struct st_sensor_transfer_function {
 168         int (*read_byte) (struct st_sensor_transfer_buffer *tb,
 169                                 struct device *dev, u8 reg_addr, u8 *res_byte);
 170         int (*write_byte) (struct st_sensor_transfer_buffer *tb,
 171                                 struct device *dev, u8 reg_addr, u8 data);
 172         int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb,
 173                 struct device *dev, u8 reg_addr, int len, u8 *data,
 174                                                         bool multiread_bit);
 175 };
 176
 177 /**
 178  * struct st_sensor_settings - ST specific sensor settings
 179  * @wai: Contents of WhoAmI register.
 180  * @wai_addr: The address of WhoAmI register.
 181  * @sensors_supported: List of supported sensors by struct itself.
 182  * @ch: IIO channels for the sensor.
 183  * @odr: Output data rate register and ODR list available.
 184  * @pw: Power register of the sensor.
 185  * @enable_axis: Enable one or more axis of the sensor.
 186  * @fs: Full scale register and full scale list available.
 187  * @bdu: Block data update register.
 188  * @drdy_irq: Data ready register of the sensor.
 189  * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
 190  * @bootime: samples to discard when sensor passing from power-down to power-up.
 191  */
 192 struct st_sensor_settings {
 193         u8 wai;
 194         u8 wai_addr;
 195         char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
 196         struct iio_chan_spec *ch;
 197         int num_ch;
 198         struct st_sensor_odr odr;
 199         struct st_sensor_power pw;
 200         struct st_sensor_axis enable_axis;
 201         struct st_sensor_fullscale fs;
 202         struct st_sensor_bdu bdu;
 203         struct st_sensor_data_ready_irq drdy_irq;
 204         bool multi_read_bit;
 205         unsigned int bootime;
 206 };
 207
 208 /**
 209  * struct st_sensor_data - ST sensor device status
 210  * @dev: Pointer to instance of struct device (I2C or SPI).
 211  * @trig: The trigger in use by the core driver.
 212  * @sensor_settings: Pointer to the specific sensor settings in use.
 213  * @current_fullscale: Maximum range of measure by the sensor.
 214  * @vdd: Pointer to sensor's Vdd power supply
 215  * @vdd_io: Pointer to sensor's Vdd-IO power supply
 216  * @enabled: Status of the sensor (false->off, true->on).
 217  * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
 218  * @buffer_data: Data used by buffer part.
 219  * @odr: Output data rate of the sensor [Hz].
 220  * num_data_channels: Number of data channels used in buffer.
 221  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
 222  * @int_pin_open_drain: Set the interrupt/DRDY to open drain.
 223  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
 224  * @tf: Transfer function structure used by I/O operations.
 225  * @tb: Transfer buffers and mutex used by I/O operations.
 226  */
 227 struct st_sensor_data {
 228         struct device *dev;
 229         struct iio_trigger *trig;
 230         struct st_sensor_settings *sensor_settings;
 231         struct st_sensor_fullscale_avl *current_fullscale;
 232         struct regulator *vdd;
 233         struct regulator *vdd_io;
 234
 235         bool enabled;
 236         bool multiread_bit;
 237
 238         char *buffer_data;
 239
 240         unsigned int odr;
 241         unsigned int num_data_channels;
 242
 243         u8 drdy_int_pin;
 244         bool int_pin_open_drain;
 245
 246         unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
 247
 248         const struct st_sensor_transfer_function *tf;
 249         struct st_sensor_transfer_buffer tb;
 250 };
 251
 252 #ifdef CONFIG_IIO_BUFFER
 253 irqreturn_t st_sensors_trigger_handler(int irq, void *p);
 254
 255 int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
 256 #endif
 257
 258 #ifdef CONFIG_IIO_TRIGGER
 259 int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 260                                 const struct iio_trigger_ops *trigger_ops);
 261
 262 void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
 263
 264 #else
 265 static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 266                                 const struct iio_trigger_ops *trigger_ops)
 267 {
 268         return 0;
 269 }
 270 static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 271 {
 272         return;
 273 }
 274 #endif
 275
 276 int st_sensors_init_sensor(struct iio_dev *indio_dev,
 277                                         struct st_sensors_platform_data *pdata);
 278
 279 int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
 280
 281 int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
 282
 283 void st_sensors_power_enable(struct iio_dev *indio_dev);
 284
 285 void st_sensors_power_disable(struct iio_dev *indio_dev);
 286
 287 int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
 288                                   unsigned reg, unsigned writeval,
 289                                   unsigned *readval);
 290
 291 int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr);
 292
 293 int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
 294
 295 int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
 296
 297 int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 298                                 struct iio_chan_spec const *ch, int *val);
 299
 300 int st_sensors_check_device_support(struct iio_dev *indio_dev,
 301         int num_sensors_list, const struct st_sensor_settings *sensor_settings);
 302
 303 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 304                                 struct device_attribute *attr, char *buf);
 305
 306 ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
 307                                 struct device_attribute *attr, char *buf);
 308
 309 #endif /* ST_SENSORS_H */