1 /* SPDX-License-Identifier: GPL-2.0+ */
5 * MontaVista IPMI system management interface
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <minyard@mvista.com>
11 * Copyright 2002 MontaVista Software Inc.
15 #ifndef __LINUX_IPMI_SMI_H
16 #define __LINUX_IPMI_SMI_H
18 #include <linux/ipmi_msgdefs.h>
19 #include <linux/proc_fs.h>
20 #include <linux/platform_device.h>
21 #include <linux/ipmi.h>
26 * This files describes the interface for IPMI system management interface
27 * drivers to bind into the IPMI message handler.
30 /* Structure for the low-level drivers. */
34 * Flags for set_check_watch() below. Tells if the SMI should be
35 * waiting for watchdog timeouts, commands and/or messages.
37 #define IPMI_WATCH_MASK_CHECK_MESSAGES (1 << 0)
38 #define IPMI_WATCH_MASK_CHECK_WATCHDOG (1 << 1)
39 #define IPMI_WATCH_MASK_CHECK_COMMANDS (1 << 2)
42 * Messages to/from the lower layer. The smi interface will take one
43 * of these to send. After the send has occurred and a response has
44 * been received, it will report this same data structure back up to
45 * the upper layer. If an error occurs, it should fill in the
46 * response with an error code in the completion code location. When
47 * asynchronous data is received, one of these is allocated, the
48 * data_size is set to zero and the response holds the data from the
49 * get message or get event command that the interface initiated.
50 * Note that it is the interfaces responsibility to detect
51 * asynchronous data and messages and request them from the
55 struct list_head link
;
61 unsigned char data
[IPMI_MAX_MSG_LENGTH
];
64 unsigned char rsp
[IPMI_MAX_MSG_LENGTH
];
67 * Will be called when the system is done with the message
68 * (presumably to free it).
70 void (*done
)(struct ipmi_smi_msg
*msg
);
73 struct ipmi_smi_handlers
{
77 * The low-level interface cannot start sending messages to
78 * the upper layer until this function is called. This may
79 * not be NULL, the lower layer must take the interface from
82 int (*start_processing
)(void *send_info
,
83 struct ipmi_smi
*new_intf
);
86 * When called, the low-level interface should disable all
87 * processing, it should be complete shut down when it returns.
89 void (*shutdown
)(void *send_info
);
92 * Get the detailed private info of the low level interface and store
93 * it into the structure of ipmi_smi_data. For example: the
94 * ACPI device handle will be returned for the pnp_acpi IPMI device.
96 int (*get_smi_info
)(void *send_info
, struct ipmi_smi_info
*data
);
99 * Called to enqueue an SMI message to be sent. This
100 * operation is not allowed to fail. If an error occurs, it
101 * should report back the error in a received message. It may
102 * do this in the current call context, since no write locks
103 * are held when this is run. Message are delivered one at
104 * a time by the message handler, a new message will not be
105 * delivered until the previous message is returned.
107 void (*sender
)(void *send_info
,
108 struct ipmi_smi_msg
*msg
);
111 * Called by the upper layer to request that we try to get
112 * events from the BMC we are attached to.
114 void (*request_events
)(void *send_info
);
117 * Called by the upper layer when some user requires that the
118 * interface watch for received messages and watchdog
119 * pretimeouts (basically do a "Get Flags", or not. Used by
120 * the SMI to know if it should watch for these. This may be
121 * NULL if the SMI does not implement it. watch_mask is from
122 * IPMI_WATCH_MASK_xxx above. The interface should run slower
123 * timeouts for just watchdog checking or faster timeouts when
124 * waiting for the message queue.
126 void (*set_need_watch
)(void *send_info
, unsigned int watch_mask
);
129 * Called when flushing all pending messages.
131 void (*flush_messages
)(void *send_info
);
134 * Called when the interface should go into "run to
135 * completion" mode. If this call sets the value to true, the
136 * interface should make sure that all messages are flushed
137 * out and that none are pending, and any new requests are run
138 * to completion immediately.
140 void (*set_run_to_completion
)(void *send_info
, bool run_to_completion
);
143 * Called to poll for work to do. This is so upper layers can
144 * poll for operations during things like crash dumps.
146 void (*poll
)(void *send_info
);
149 * Enable/disable firmware maintenance mode. Note that this
150 * is *not* the modes defined, this is simply an on/off
151 * setting. The message handler does the mode handling. Note
152 * that this is called from interrupt context, so it cannot
155 void (*set_maintenance_mode
)(void *send_info
, bool enable
);
158 struct ipmi_device_id
{
159 unsigned char device_id
;
160 unsigned char device_revision
;
161 unsigned char firmware_revision_1
;
162 unsigned char firmware_revision_2
;
163 unsigned char ipmi_version
;
164 unsigned char additional_device_support
;
165 unsigned int manufacturer_id
;
166 unsigned int product_id
;
167 unsigned char aux_firmware_revision
[4];
168 unsigned int aux_firmware_revision_set
: 1;
171 #define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
172 #define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
175 * Take a pointer to an IPMI response and extract device id information from
176 * it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from
179 static inline int ipmi_demangle_device_id(uint8_t netfn
, uint8_t cmd
,
180 const unsigned char *data
,
181 unsigned int data_len
,
182 struct ipmi_device_id
*id
)
186 if (netfn
!= IPMI_NETFN_APP_RESPONSE
|| cmd
!= IPMI_GET_DEVICE_ID_CMD
)
187 /* Strange, didn't get the response we expected. */
190 /* That's odd, it shouldn't be able to fail. */
196 id
->device_id
= data
[0];
197 id
->device_revision
= data
[1];
198 id
->firmware_revision_1
= data
[2];
199 id
->firmware_revision_2
= data
[3];
200 id
->ipmi_version
= data
[4];
201 id
->additional_device_support
= data
[5];
202 if (data_len
>= 11) {
203 id
->manufacturer_id
= (data
[6] | (data
[7] << 8) |
205 id
->product_id
= data
[9] | (data
[10] << 8);
207 id
->manufacturer_id
= 0;
210 if (data_len
>= 15) {
211 memcpy(id
->aux_firmware_revision
, data
+11, 4);
212 id
->aux_firmware_revision_set
= 1;
214 id
->aux_firmware_revision_set
= 0;
220 * Add a low-level interface to the IPMI driver. Note that if the
221 * interface doesn't know its slave address, it should pass in zero.
222 * The low-level interface should not deliver any messages to the
223 * upper layer until the start_processing() function in the handlers
224 * is called, and the lower layer must get the interface from that
227 int ipmi_add_smi(struct module
*owner
,
228 const struct ipmi_smi_handlers
*handlers
,
231 unsigned char slave_addr
);
233 #define ipmi_register_smi(handlers, send_info, dev, slave_addr) \
234 ipmi_add_smi(THIS_MODULE, handlers, send_info, dev, slave_addr)
237 * Remove a low-level interface from the IPMI driver. This will
238 * return an error if the interface is still in use by a user.
240 void ipmi_unregister_smi(struct ipmi_smi
*intf
);
243 * The lower layer reports received messages through this interface.
244 * The data_size should be zero if this is an asynchronous message. If
245 * the lower layer gets an error sending a message, it should format
246 * an error response in the message response.
248 void ipmi_smi_msg_received(struct ipmi_smi
*intf
,
249 struct ipmi_smi_msg
*msg
);
251 /* The lower layer received a watchdog pre-timeout on interface. */
252 void ipmi_smi_watchdog_pretimeout(struct ipmi_smi
*intf
);
254 struct ipmi_smi_msg
*ipmi_alloc_smi_msg(void);
255 static inline void ipmi_free_smi_msg(struct ipmi_smi_msg
*msg
)
260 #endif /* __LINUX_IPMI_SMI_H */