1 #ifndef _LINUX_MEMBLOCK_H
2 #define _LINUX_MEMBLOCK_H
5 #ifdef CONFIG_HAVE_MEMBLOCK
7 * Logical memory blocks.
9 * Copyright (C) 2001 Peter Bergner, IBM Corp.
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * as published by the Free Software Foundation; either version
14 * 2 of the License, or (at your option) any later version.
17 #include <linux/init.h>
20 #define INIT_MEMBLOCK_REGIONS 128
21 #define INIT_PHYSMEM_REGIONS 4
23 /* Definition of memblock flags. */
24 #define MEMBLOCK_HOTPLUG 0x1 /* hotpluggable region */
26 struct memblock_region
{
30 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
35 struct memblock_type
{
36 unsigned long cnt
; /* number of regions */
37 unsigned long max
; /* size of the allocated array */
38 phys_addr_t total_size
; /* size of all regions */
39 struct memblock_region
*regions
;
43 bool bottom_up
; /* is bottom up direction? */
44 phys_addr_t current_limit
;
45 struct memblock_type memory
;
46 struct memblock_type reserved
;
47 #ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
48 struct memblock_type physmem
;
52 extern struct memblock memblock
;
53 extern int memblock_debug
;
54 #ifdef CONFIG_MOVABLE_NODE
55 /* If movable_node boot option specified */
56 extern bool movable_node_enabled
;
57 #endif /* CONFIG_MOVABLE_NODE */
59 #define memblock_dbg(fmt, ...) \
60 if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
62 phys_addr_t
memblock_find_in_range_node(phys_addr_t size
, phys_addr_t align
,
63 phys_addr_t start
, phys_addr_t end
,
65 phys_addr_t
memblock_find_in_range(phys_addr_t start
, phys_addr_t end
,
66 phys_addr_t size
, phys_addr_t align
);
67 phys_addr_t
get_allocated_memblock_reserved_regions_info(phys_addr_t
*addr
);
68 phys_addr_t
get_allocated_memblock_memory_regions_info(phys_addr_t
*addr
);
69 void memblock_allow_resize(void);
70 int memblock_add_node(phys_addr_t base
, phys_addr_t size
, int nid
);
71 int memblock_add(phys_addr_t base
, phys_addr_t size
);
72 int memblock_remove(phys_addr_t base
, phys_addr_t size
);
73 int memblock_free(phys_addr_t base
, phys_addr_t size
);
74 int memblock_reserve(phys_addr_t base
, phys_addr_t size
);
75 void memblock_trim_memory(phys_addr_t align
);
76 int memblock_mark_hotplug(phys_addr_t base
, phys_addr_t size
);
77 int memblock_clear_hotplug(phys_addr_t base
, phys_addr_t size
);
79 /* Low level functions */
80 int memblock_add_range(struct memblock_type
*type
,
81 phys_addr_t base
, phys_addr_t size
,
82 int nid
, unsigned long flags
);
84 int memblock_remove_range(struct memblock_type
*type
,
88 void __next_mem_range(u64
*idx
, int nid
, struct memblock_type
*type_a
,
89 struct memblock_type
*type_b
, phys_addr_t
*out_start
,
90 phys_addr_t
*out_end
, int *out_nid
);
92 void __next_mem_range_rev(u64
*idx
, int nid
, struct memblock_type
*type_a
,
93 struct memblock_type
*type_b
, phys_addr_t
*out_start
,
94 phys_addr_t
*out_end
, int *out_nid
);
97 * for_each_mem_range - iterate through memblock areas from type_a and not
98 * included in type_b. Or just type_a if type_b is NULL.
99 * @i: u64 used as loop variable
100 * @type_a: ptr to memblock_type to iterate
101 * @type_b: ptr to memblock_type which excludes from the iteration
102 * @nid: node selector, %NUMA_NO_NODE for all nodes
103 * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
104 * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
105 * @p_nid: ptr to int for nid of the range, can be %NULL
107 #define for_each_mem_range(i, type_a, type_b, nid, \
108 p_start, p_end, p_nid) \
109 for (i = 0, __next_mem_range(&i, nid, type_a, type_b, \
110 p_start, p_end, p_nid); \
111 i != (u64)ULLONG_MAX; \
112 __next_mem_range(&i, nid, type_a, type_b, \
113 p_start, p_end, p_nid))
116 * for_each_mem_range_rev - reverse iterate through memblock areas from
117 * type_a and not included in type_b. Or just type_a if type_b is NULL.
118 * @i: u64 used as loop variable
119 * @type_a: ptr to memblock_type to iterate
120 * @type_b: ptr to memblock_type which excludes from the iteration
121 * @nid: node selector, %NUMA_NO_NODE for all nodes
122 * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
123 * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
124 * @p_nid: ptr to int for nid of the range, can be %NULL
126 #define for_each_mem_range_rev(i, type_a, type_b, nid, \
127 p_start, p_end, p_nid) \
128 for (i = (u64)ULLONG_MAX, \
129 __next_mem_range_rev(&i, nid, type_a, type_b, \
130 p_start, p_end, p_nid); \
131 i != (u64)ULLONG_MAX; \
132 __next_mem_range_rev(&i, nid, type_a, type_b, \
133 p_start, p_end, p_nid))
135 #ifdef CONFIG_MOVABLE_NODE
136 static inline bool memblock_is_hotpluggable(struct memblock_region
*m
)
138 return m
->flags
& MEMBLOCK_HOTPLUG
;
141 static inline bool movable_node_is_enabled(void)
143 return movable_node_enabled
;
146 static inline bool memblock_is_hotpluggable(struct memblock_region
*m
)
150 static inline bool movable_node_is_enabled(void)
156 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
157 int memblock_search_pfn_nid(unsigned long pfn
, unsigned long *start_pfn
,
158 unsigned long *end_pfn
);
159 void __next_mem_pfn_range(int *idx
, int nid
, unsigned long *out_start_pfn
,
160 unsigned long *out_end_pfn
, int *out_nid
);
163 * for_each_mem_pfn_range - early memory pfn range iterator
164 * @i: an integer used as loop variable
165 * @nid: node selector, %MAX_NUMNODES for all nodes
166 * @p_start: ptr to ulong for start pfn of the range, can be %NULL
167 * @p_end: ptr to ulong for end pfn of the range, can be %NULL
168 * @p_nid: ptr to int for nid of the range, can be %NULL
170 * Walks over configured memory ranges.
172 #define for_each_mem_pfn_range(i, nid, p_start, p_end, p_nid) \
173 for (i = -1, __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid); \
174 i >= 0; __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid))
175 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
178 * for_each_free_mem_range - iterate through free memblock areas
179 * @i: u64 used as loop variable
180 * @nid: node selector, %NUMA_NO_NODE for all nodes
181 * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
182 * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
183 * @p_nid: ptr to int for nid of the range, can be %NULL
185 * Walks over free (memory && !reserved) areas of memblock. Available as
186 * soon as memblock is initialized.
188 #define for_each_free_mem_range(i, nid, p_start, p_end, p_nid) \
189 for_each_mem_range(i, &memblock.memory, &memblock.reserved, \
190 nid, p_start, p_end, p_nid)
193 * for_each_free_mem_range_reverse - rev-iterate through free memblock areas
194 * @i: u64 used as loop variable
195 * @nid: node selector, %NUMA_NO_NODE for all nodes
196 * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
197 * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
198 * @p_nid: ptr to int for nid of the range, can be %NULL
200 * Walks over free (memory && !reserved) areas of memblock in reverse
201 * order. Available as soon as memblock is initialized.
203 #define for_each_free_mem_range_reverse(i, nid, p_start, p_end, p_nid) \
204 for_each_mem_range_rev(i, &memblock.memory, &memblock.reserved, \
205 nid, p_start, p_end, p_nid)
207 static inline void memblock_set_region_flags(struct memblock_region
*r
,
213 static inline void memblock_clear_region_flags(struct memblock_region
*r
,
219 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
220 int memblock_set_node(phys_addr_t base
, phys_addr_t size
,
221 struct memblock_type
*type
, int nid
);
223 static inline void memblock_set_region_node(struct memblock_region
*r
, int nid
)
228 static inline int memblock_get_region_node(const struct memblock_region
*r
)
233 static inline void memblock_set_region_node(struct memblock_region
*r
, int nid
)
237 static inline int memblock_get_region_node(const struct memblock_region
*r
)
241 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
243 phys_addr_t
memblock_alloc_nid(phys_addr_t size
, phys_addr_t align
, int nid
);
244 phys_addr_t
memblock_alloc_try_nid(phys_addr_t size
, phys_addr_t align
, int nid
);
246 phys_addr_t
memblock_alloc(phys_addr_t size
, phys_addr_t align
);
248 #ifdef CONFIG_MOVABLE_NODE
250 * Set the allocation direction to bottom-up or top-down.
252 static inline void __init
memblock_set_bottom_up(bool enable
)
254 memblock
.bottom_up
= enable
;
258 * Check if the allocation direction is bottom-up or not.
259 * if this is true, that said, memblock will allocate memory
260 * in bottom-up direction.
262 static inline bool memblock_bottom_up(void)
264 return memblock
.bottom_up
;
267 static inline void __init
memblock_set_bottom_up(bool enable
) {}
268 static inline bool memblock_bottom_up(void) { return false; }
271 /* Flags for memblock_alloc_base() amd __memblock_alloc_base() */
272 #define MEMBLOCK_ALLOC_ANYWHERE (~(phys_addr_t)0)
273 #define MEMBLOCK_ALLOC_ACCESSIBLE 0
275 phys_addr_t __init
memblock_alloc_range(phys_addr_t size
, phys_addr_t align
,
276 phys_addr_t start
, phys_addr_t end
);
277 phys_addr_t
memblock_alloc_base(phys_addr_t size
, phys_addr_t align
,
278 phys_addr_t max_addr
);
279 phys_addr_t
__memblock_alloc_base(phys_addr_t size
, phys_addr_t align
,
280 phys_addr_t max_addr
);
281 phys_addr_t
memblock_phys_mem_size(void);
282 phys_addr_t
memblock_mem_size(unsigned long limit_pfn
);
283 phys_addr_t
memblock_start_of_DRAM(void);
284 phys_addr_t
memblock_end_of_DRAM(void);
285 void memblock_enforce_memory_limit(phys_addr_t memory_limit
);
286 int memblock_is_memory(phys_addr_t addr
);
287 int memblock_is_region_memory(phys_addr_t base
, phys_addr_t size
);
288 int memblock_is_reserved(phys_addr_t addr
);
289 int memblock_is_region_reserved(phys_addr_t base
, phys_addr_t size
);
291 extern void __memblock_dump_all(void);
293 static inline void memblock_dump_all(void)
296 __memblock_dump_all();
300 * memblock_set_current_limit - Set the current allocation limit to allow
301 * limiting allocations to what is currently
302 * accessible during boot
303 * @limit: New limit value (physical address)
305 void memblock_set_current_limit(phys_addr_t limit
);
308 phys_addr_t
memblock_get_current_limit(void);
311 * pfn conversion functions
313 * While the memory MEMBLOCKs should always be page aligned, the reserved
314 * MEMBLOCKs may not be. This accessor attempt to provide a very clear
315 * idea of what they return for such non aligned MEMBLOCKs.
319 * memblock_region_memory_base_pfn - Return the lowest pfn intersecting with the memory region
320 * @reg: memblock_region structure
322 static inline unsigned long memblock_region_memory_base_pfn(const struct memblock_region
*reg
)
324 return PFN_UP(reg
->base
);
328 * memblock_region_memory_end_pfn - Return the end_pfn this region
329 * @reg: memblock_region structure
331 static inline unsigned long memblock_region_memory_end_pfn(const struct memblock_region
*reg
)
333 return PFN_DOWN(reg
->base
+ reg
->size
);
337 * memblock_region_reserved_base_pfn - Return the lowest pfn intersecting with the reserved region
338 * @reg: memblock_region structure
340 static inline unsigned long memblock_region_reserved_base_pfn(const struct memblock_region
*reg
)
342 return PFN_DOWN(reg
->base
);
346 * memblock_region_reserved_end_pfn - Return the end_pfn this region
347 * @reg: memblock_region structure
349 static inline unsigned long memblock_region_reserved_end_pfn(const struct memblock_region
*reg
)
351 return PFN_UP(reg
->base
+ reg
->size
);
354 #define for_each_memblock(memblock_type, region) \
355 for (region = memblock.memblock_type.regions; \
356 region < (memblock.memblock_type.regions + memblock.memblock_type.cnt); \
360 #ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
361 #define __init_memblock __meminit
362 #define __initdata_memblock __meminitdata
364 #define __init_memblock
365 #define __initdata_memblock
369 static inline phys_addr_t
memblock_alloc(phys_addr_t size
, phys_addr_t align
)
374 #endif /* CONFIG_HAVE_MEMBLOCK */
376 #endif /* __KERNEL__ */
378 #endif /* _LINUX_MEMBLOCK_H */