include/linux/mii.h

   1 /*
   2  * linux/mii.h: definitions for MII-compatible transceivers
   3  * Originally drivers/net/sunhme.h.
   4  *
   5  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
   6  */
   7 #ifndef __LINUX_MII_H__
   8 #define __LINUX_MII_H__
   9
  10
  11 #include <linux/if.h>
  12 #include <uapi/linux/mii.h>
  13
  14 struct ethtool_cmd;
  15
  16 struct mii_if_info {
  17         int phy_id;
  18         int advertising;
  19         int phy_id_mask;
  20         int reg_num_mask;
  21
  22         unsigned int full_duplex : 1;   /* is full duplex? */
  23         unsigned int force_media : 1;   /* is autoneg. disabled? */
  24         unsigned int supports_gmii : 1; /* are GMII registers supported? */
  25
  26         struct net_device *dev;
  27         int (*mdio_read) (struct net_device *dev, int phy_id, int location);
  28         void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
  29 };
  30
  31 extern int mii_link_ok (struct mii_if_info *mii);
  32 extern int mii_nway_restart (struct mii_if_info *mii);
  33 extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
  34 extern void mii_ethtool_get_link_ksettings(
  35         struct mii_if_info *mii, struct ethtool_link_ksettings *cmd);
  36 extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
  37 extern int mii_ethtool_set_link_ksettings(
  38         struct mii_if_info *mii, const struct ethtool_link_ksettings *cmd);
  39 extern int mii_check_gmii_support(struct mii_if_info *mii);
  40 extern void mii_check_link (struct mii_if_info *mii);
  41 extern unsigned int mii_check_media (struct mii_if_info *mii,
  42                                      unsigned int ok_to_print,
  43                                      unsigned int init_media);
  44 extern int generic_mii_ioctl(struct mii_if_info *mii_if,
  45                              struct mii_ioctl_data *mii_data, int cmd,
  46                              unsigned int *duplex_changed);
  47
  48
  49 static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
  50 {
  51         return (struct mii_ioctl_data *) &rq->ifr_ifru;
  52 }
  53
  54 /**
  55  * mii_nway_result
  56  * @negotiated: value of MII ANAR and'd with ANLPAR
  57  *
  58  * Given a set of MII abilities, check each bit and returns the
  59  * currently supported media, in the priority order defined by
  60  * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
  61  * value of LPA solely, as described above.
  62  *
  63  * The one exception to IEEE 802.3u is that 100baseT4 is placed
  64  * between 100T-full and 100T-half.  If your phy does not support
  65  * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
  66  * priority order, you will need to roll your own function.
  67  */
  68 static inline unsigned int mii_nway_result (unsigned int negotiated)
  69 {
  70         unsigned int ret;
  71
  72         if (negotiated & LPA_100FULL)
  73                 ret = LPA_100FULL;
  74         else if (negotiated & LPA_100BASE4)
  75                 ret = LPA_100BASE4;
  76         else if (negotiated & LPA_100HALF)
  77                 ret = LPA_100HALF;
  78         else if (negotiated & LPA_10FULL)
  79                 ret = LPA_10FULL;
  80         else
  81                 ret = LPA_10HALF;
  82
  83         return ret;
  84 }
  85
  86 /**
  87  * mii_duplex
  88  * @duplex_lock: Non-zero if duplex is locked at full
  89  * @negotiated: value of MII ANAR and'd with ANLPAR
  90  *
  91  * A small helper function for a common case.  Returns one
  92  * if the media is operating or locked at full duplex, and
  93  * returns zero otherwise.
  94  */
  95 static inline unsigned int mii_duplex (unsigned int duplex_lock,
  96                                        unsigned int negotiated)
  97 {
  98         if (duplex_lock)
  99                 return 1;
 100         if (mii_nway_result(negotiated) & LPA_DUPLEX)
 101                 return 1;
 102         return 0;
 103 }
 104
 105 /**
 106  * ethtool_adv_to_mii_adv_t
 107  * @ethadv: the ethtool advertisement settings
 108  *
 109  * A small helper function that translates ethtool advertisement
 110  * settings to phy autonegotiation advertisements for the
 111  * MII_ADVERTISE register.
 112  */
 113 static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
 114 {
 115         u32 result = 0;
 116
 117         if (ethadv & ADVERTISED_10baseT_Half)
 118                 result |= ADVERTISE_10HALF;
 119         if (ethadv & ADVERTISED_10baseT_Full)
 120                 result |= ADVERTISE_10FULL;
 121         if (ethadv & ADVERTISED_100baseT_Half)
 122                 result |= ADVERTISE_100HALF;
 123         if (ethadv & ADVERTISED_100baseT_Full)
 124                 result |= ADVERTISE_100FULL;
 125         if (ethadv & ADVERTISED_Pause)
 126                 result |= ADVERTISE_PAUSE_CAP;
 127         if (ethadv & ADVERTISED_Asym_Pause)
 128                 result |= ADVERTISE_PAUSE_ASYM;
 129
 130         return result;
 131 }
 132
 133 /**
 134  * mii_adv_to_ethtool_adv_t
 135  * @adv: value of the MII_ADVERTISE register
 136  *
 137  * A small helper function that translates MII_ADVERTISE bits
 138  * to ethtool advertisement settings.
 139  */
 140 static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
 141 {
 142         u32 result = 0;
 143
 144         if (adv & ADVERTISE_10HALF)
 145                 result |= ADVERTISED_10baseT_Half;
 146         if (adv & ADVERTISE_10FULL)
 147                 result |= ADVERTISED_10baseT_Full;
 148         if (adv & ADVERTISE_100HALF)
 149                 result |= ADVERTISED_100baseT_Half;
 150         if (adv & ADVERTISE_100FULL)
 151                 result |= ADVERTISED_100baseT_Full;
 152         if (adv & ADVERTISE_PAUSE_CAP)
 153                 result |= ADVERTISED_Pause;
 154         if (adv & ADVERTISE_PAUSE_ASYM)
 155                 result |= ADVERTISED_Asym_Pause;
 156
 157         return result;
 158 }
 159
 160 /**
 161  * ethtool_adv_to_mii_ctrl1000_t
 162  * @ethadv: the ethtool advertisement settings
 163  *
 164  * A small helper function that translates ethtool advertisement
 165  * settings to phy autonegotiation advertisements for the
 166  * MII_CTRL1000 register when in 1000T mode.
 167  */
 168 static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
 169 {
 170         u32 result = 0;
 171
 172         if (ethadv & ADVERTISED_1000baseT_Half)
 173                 result |= ADVERTISE_1000HALF;
 174         if (ethadv & ADVERTISED_1000baseT_Full)
 175                 result |= ADVERTISE_1000FULL;
 176
 177         return result;
 178 }
 179
 180 /**
 181  * mii_ctrl1000_to_ethtool_adv_t
 182  * @adv: value of the MII_CTRL1000 register
 183  *
 184  * A small helper function that translates MII_CTRL1000
 185  * bits, when in 1000Base-T mode, to ethtool
 186  * advertisement settings.
 187  */
 188 static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
 189 {
 190         u32 result = 0;
 191
 192         if (adv & ADVERTISE_1000HALF)
 193                 result |= ADVERTISED_1000baseT_Half;
 194         if (adv & ADVERTISE_1000FULL)
 195                 result |= ADVERTISED_1000baseT_Full;
 196
 197         return result;
 198 }
 199
 200 /**
 201  * mii_lpa_to_ethtool_lpa_t
 202  * @adv: value of the MII_LPA register
 203  *
 204  * A small helper function that translates MII_LPA
 205  * bits, when in 1000Base-T mode, to ethtool
 206  * LP advertisement settings.
 207  */
 208 static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
 209 {
 210         u32 result = 0;
 211
 212         if (lpa & LPA_LPACK)
 213                 result |= ADVERTISED_Autoneg;
 214
 215         return result | mii_adv_to_ethtool_adv_t(lpa);
 216 }
 217
 218 /**
 219  * mii_stat1000_to_ethtool_lpa_t
 220  * @adv: value of the MII_STAT1000 register
 221  *
 222  * A small helper function that translates MII_STAT1000
 223  * bits, when in 1000Base-T mode, to ethtool
 224  * advertisement settings.
 225  */
 226 static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
 227 {
 228         u32 result = 0;
 229
 230         if (lpa & LPA_1000HALF)
 231                 result |= ADVERTISED_1000baseT_Half;
 232         if (lpa & LPA_1000FULL)
 233                 result |= ADVERTISED_1000baseT_Full;
 234
 235         return result;
 236 }
 237
 238 /**
 239  * ethtool_adv_to_mii_adv_x
 240  * @ethadv: the ethtool advertisement settings
 241  *
 242  * A small helper function that translates ethtool advertisement
 243  * settings to phy autonegotiation advertisements for the
 244  * MII_CTRL1000 register when in 1000Base-X mode.
 245  */
 246 static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
 247 {
 248         u32 result = 0;
 249
 250         if (ethadv & ADVERTISED_1000baseT_Half)
 251                 result |= ADVERTISE_1000XHALF;
 252         if (ethadv & ADVERTISED_1000baseT_Full)
 253                 result |= ADVERTISE_1000XFULL;
 254         if (ethadv & ADVERTISED_Pause)
 255                 result |= ADVERTISE_1000XPAUSE;
 256         if (ethadv & ADVERTISED_Asym_Pause)
 257                 result |= ADVERTISE_1000XPSE_ASYM;
 258
 259         return result;
 260 }
 261
 262 /**
 263  * mii_adv_to_ethtool_adv_x
 264  * @adv: value of the MII_CTRL1000 register
 265  *
 266  * A small helper function that translates MII_CTRL1000
 267  * bits, when in 1000Base-X mode, to ethtool
 268  * advertisement settings.
 269  */
 270 static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
 271 {
 272         u32 result = 0;
 273
 274         if (adv & ADVERTISE_1000XHALF)
 275                 result |= ADVERTISED_1000baseT_Half;
 276         if (adv & ADVERTISE_1000XFULL)
 277                 result |= ADVERTISED_1000baseT_Full;
 278         if (adv & ADVERTISE_1000XPAUSE)
 279                 result |= ADVERTISED_Pause;
 280         if (adv & ADVERTISE_1000XPSE_ASYM)
 281                 result |= ADVERTISED_Asym_Pause;
 282
 283         return result;
 284 }
 285
 286 /**
 287  * mii_lpa_to_ethtool_lpa_x
 288  * @adv: value of the MII_LPA register
 289  *
 290  * A small helper function that translates MII_LPA
 291  * bits, when in 1000Base-X mode, to ethtool
 292  * LP advertisement settings.
 293  */
 294 static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
 295 {
 296         u32 result = 0;
 297
 298         if (lpa & LPA_LPACK)
 299                 result |= ADVERTISED_Autoneg;
 300
 301         return result | mii_adv_to_ethtool_adv_x(lpa);
 302 }
 303
 304 /**
 305  * mii_advertise_flowctrl - get flow control advertisement flags
 306  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
 307  */
 308 static inline u16 mii_advertise_flowctrl(int cap)
 309 {
 310         u16 adv = 0;
 311
 312         if (cap & FLOW_CTRL_RX)
 313                 adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 314         if (cap & FLOW_CTRL_TX)
 315                 adv ^= ADVERTISE_PAUSE_ASYM;
 316
 317         return adv;
 318 }
 319
 320 /**
 321  * mii_resolve_flowctrl_fdx
 322  * @lcladv: value of MII ADVERTISE register
 323  * @rmtadv: value of MII LPA register
 324  *
 325  * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
 326  */
 327 static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 328 {
 329         u8 cap = 0;
 330
 331         if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
 332                 cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
 333         } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
 334                 if (lcladv & ADVERTISE_PAUSE_CAP)
 335                         cap = FLOW_CTRL_RX;
 336                 else if (rmtadv & ADVERTISE_PAUSE_CAP)
 337                         cap = FLOW_CTRL_TX;
 338         }
 339
 340         return cap;
 341 }
 342
 343 #endif /* __LINUX_MII_H__ */