1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
4 * 802.11 netlink interface public header
6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
9 * Copyright 2008 Michael Buesch <m@bues.ch>
10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
12 * Copyright 2008 Colin McCabe <colin@cozybit.com>
14 * Permission to use, copy, modify, and/or distribute this software for any
15 * purpose with or without fee is hereby granted, provided that the above
16 * copyright notice and this permission notice appear in all copies.
18 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
28 #include <linux/types.h>
31 * DOC: Station handling
33 * Stations are added per interface, but a special case exists with VLAN
34 * interfaces. When a station is bound to an AP interface, it may be moved
35 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
36 * The station is still assumed to belong to the AP interface it was added
39 * TODO: need more info?
43 * DOC: Frame transmission/registration support
45 * Frame transmission and registration support exists to allow userspace
46 * management entities such as wpa_supplicant react to management frames
47 * that are not being handled by the kernel. This includes, for example,
48 * certain classes of action frames that cannot be handled in the kernel
49 * for various reasons.
51 * Frame registration is done on a per-interface basis and registrations
52 * cannot be removed other than by closing the socket. It is possible to
53 * specify a registration filter to register, for example, only for a
54 * certain type of action frame. In particular with action frames, those
55 * that userspace registers for will not be returned as unhandled by the
56 * driver, so that the registered application has to take responsibility
59 * The type of frame that can be registered for is also dependent on the
60 * driver and interface type. The frame types are advertised in wiphy
61 * attributes so applications know what to expect.
63 * NOTE: When an interface changes type while registrations are active,
64 * these registrations are ignored until the interface type is
65 * changed again. This means that changing the interface type can
66 * lead to a situation that couldn't otherwise be produced, but
67 * any such registrations will be dormant in the sense that they
68 * will not be serviced, i.e. they will not receive any frames.
70 * Frame transmission allows userspace to send for example the required
71 * responses to action frames. It is subject to some sanity checking,
72 * but many frames can be transmitted. When a frame was transmitted, its
73 * status is indicated to the sending socket.
75 * For more technical details, see the corresponding command descriptions
80 * DOC: Virtual interface / concurrency capabilities
82 * Some devices are able to operate with virtual MACs, they can have
83 * more than one virtual interface. The capability handling for this
84 * is a bit complex though, as there may be a number of restrictions
85 * on the types of concurrency that are supported.
87 * To start with, each device supports the interface types listed in
88 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
89 * types there no concurrency is implied.
91 * Once concurrency is desired, more attributes must be observed:
92 * To start with, since some interface types are purely managed in
93 * software, like the AP-VLAN type in mac80211 for example, there's
94 * an additional list of these, they can be added at any time and
95 * are only restricted by some semantic restrictions (e.g. AP-VLAN
96 * cannot be added without a corresponding AP interface). This list
97 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
99 * Further, the list of supported combinations is exported. This is
100 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
101 * it exports a list of "groups", and at any point in time the
102 * interfaces that are currently active must fall into any one of
103 * the advertised groups. Within each group, there are restrictions
104 * on the number of interfaces of different types that are supported
105 * and also the number of different channels, along with potentially
106 * some other restrictions. See &enum nl80211_if_combination_attrs.
108 * All together, these attributes define the concurrency of virtual
109 * interfaces that a given device supports.
113 * enum nl80211_commands - supported nl80211 commands
115 * @NL80211_CMD_UNSPEC: unspecified command to catch errors
117 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
118 * to get a list of all present wiphys.
119 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
120 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
121 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
122 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
123 * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
124 * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
125 * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
126 * instead, the support here is for backward compatibility only.
127 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
128 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
129 * %NL80211_ATTR_WIPHY_NAME.
130 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
131 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
133 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
134 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
135 * on an %NL80211_ATTR_IFINDEX is supported.
136 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
137 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
138 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
139 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
140 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
141 * be sent from userspace to request creation of a new virtual interface,
142 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
143 * %NL80211_ATTR_IFNAME.
144 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
145 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
146 * userspace to request deletion of a virtual interface, then requires
147 * attribute %NL80211_ATTR_IFINDEX.
149 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
150 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
151 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
152 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
153 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
154 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
155 * and %NL80211_ATTR_KEY_SEQ attributes.
156 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
157 * or %NL80211_ATTR_MAC.
159 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
160 * %NL80222_CMD_NEW_BEACON message)
161 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
162 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
163 * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
164 * Following attributes are provided for drivers that generate full Beacon
165 * and Probe Response frames internally: %NL80211_ATTR_SSID,
166 * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
167 * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
168 * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
169 * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
170 * %NL80211_ATTR_IE_ASSOC_RESP.
171 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
172 * parameters are like for %NL80211_CMD_SET_BEACON.
173 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
175 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
176 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
177 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
178 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
179 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
180 * the interface identified by %NL80211_ATTR_IFINDEX.
181 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
182 * or, if no MAC address given, all stations, on the interface identified
183 * by %NL80211_ATTR_IFINDEX.
185 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
186 * destination %NL80211_ATTR_MAC on the interface identified by
187 * %NL80211_ATTR_IFINDEX.
188 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
189 * destination %NL80211_ATTR_MAC on the interface identified by
190 * %NL80211_ATTR_IFINDEX.
191 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
192 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
193 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
195 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
196 * the interface identified by %NL80211_ATTR_IFINDEX.
197 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
198 * or, if no MAC address given, all mesh paths, on the interface identified
199 * by %NL80211_ATTR_IFINDEX.
200 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
201 * %NL80211_ATTR_IFINDEX.
203 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
205 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
206 * after being queried by the kernel. CRDA replies by sending a regulatory
207 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
208 * current alpha2 if it found a match. It also provides
209 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
210 * regulatory rule is a nested set of attributes given by
211 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
212 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
213 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
214 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
215 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
216 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
217 * store this as a valid request and then query userspace for it.
219 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
220 * interface identified by %NL80211_ATTR_IFINDEX
222 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
223 * interface identified by %NL80211_ATTR_IFINDEX
225 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
226 * interface is identified with %NL80211_ATTR_IFINDEX and the management
227 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
228 * added to the end of the specified management frame is specified with
229 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
230 * added to all specified management frames generated by
231 * kernel/firmware/driver.
232 * Note: This command has been removed and it is only reserved at this
233 * point to avoid re-using existing command number. The functionality this
234 * command was planned for has been provided with cleaner design with the
235 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
236 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
237 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
239 * @NL80211_CMD_GET_SCAN: get scan results
240 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
241 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
242 * probe requests at CCK rate or not.
243 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
244 * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
245 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
246 * partial scan results may be available
248 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
249 * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
250 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
251 * are passed, they are used in the probe requests. For
252 * broadcast, a broadcast SSID must be passed (ie. an empty
253 * string). If no SSID is passed, no probe requests are sent and
254 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
255 * if passed, define which channels should be scanned; if not
256 * passed, all channels allowed for the current regulatory domain
257 * are used. Extra IEs can also be passed from the userspace by
258 * using the %NL80211_ATTR_IE attribute.
259 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
260 * if scheduled scan is not running.
261 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
263 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
264 * stopped. The driver may issue this event at any time during a
265 * scheduled scan. One reason for stopping the scan is if the hardware
266 * does not support starting an association or a normal scan while running
267 * a scheduled scan. This event is also sent when the
268 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
269 * is brought down while a scheduled scan was running.
271 * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
273 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
274 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
276 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
277 * has been changed and provides details of the request information
278 * that caused the change such as who initiated the regulatory request
279 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
280 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
281 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
282 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
283 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
284 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
285 * to (%NL80211_ATTR_REG_ALPHA2).
286 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
287 * has been found while world roaming thus enabling active scan or
288 * any mode of operation that initiates TX (beacons) on a channel
289 * where we would not have been able to do either before. As an example
290 * if you are world roaming (regulatory domain set to world or if your
291 * driver is using a custom world roaming regulatory domain) and while
292 * doing a passive scan on the 5 GHz band you find an AP there (if not
293 * on a DFS channel) you will now be able to actively scan for that AP
294 * or use AP mode on your card on that same channel. Note that this will
295 * never be used for channels 1-11 on the 2 GHz band as they are always
296 * enabled world wide. This beacon hint is only sent if your device had
297 * either disabled active scanning or beaconing on a channel. We send to
298 * userspace the wiphy on which we removed a restriction from
299 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
300 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
301 * the beacon hint was processed.
303 * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
304 * This command is used both as a command (request to authenticate) and
305 * as an event on the "mlme" multicast group indicating completion of the
306 * authentication process.
307 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
308 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
309 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
310 * the SSID (mainly for association, but is included in authentication
311 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
312 * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
313 * is used to specify the authentication type. %NL80211_ATTR_IE is used to
314 * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
315 * to be added to the frame.
316 * When used as an event, this reports reception of an Authentication
317 * frame in station and IBSS modes when the local MLME processed the
318 * frame, i.e., it was for the local STA and was received in correct
319 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
320 * MLME SAP interface (kernel providing MLME, userspace SME). The
321 * included %NL80211_ATTR_FRAME attribute contains the management frame
322 * (including both the header and frame body, but not FCS). This event is
323 * also used to indicate if the authentication attempt timed out. In that
324 * case the %NL80211_ATTR_FRAME attribute is replaced with a
325 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
326 * pending authentication timed out).
327 * @NL80211_CMD_ASSOCIATE: association request and notification; like
328 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
329 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
330 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
331 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
332 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
333 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
335 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
336 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
337 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
339 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
340 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
341 * event includes %NL80211_ATTR_MAC to describe the source MAC address of
342 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
343 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
344 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
345 * event matches with MLME-MICHAELMICFAILURE.indication() primitive
347 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
348 * FREQ attribute (for the initial frequency if no peer can be found)
349 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
350 * should be fixed rather than automatically determined. Can only be
351 * executed on a network interface that is UP, and fixed BSSID/FREQ
352 * may be rejected. Another optional parameter is the beacon interval,
353 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
354 * given defaults to 100 TU (102.4ms).
355 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
356 * determined by the network interface.
358 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
359 * to identify the device, and the TESTDATA blob attribute to pass through
362 * @NL80211_CMD_CONNECT: connection request and notification; this command
363 * requests to connect to a specified network but without separating
364 * auth and assoc steps. For this, you need to specify the SSID in a
365 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
366 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
367 * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
368 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
369 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
370 * It is also sent as an event, with the BSSID and response IEs when the
371 * connection is established or failed to be established. This can be
372 * determined by the STATUS_CODE attribute.
373 * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
374 * sent as an event when the card/driver roamed by itself.
375 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
376 * userspace that a connection was dropped by the AP or due to other
377 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
378 * %NL80211_ATTR_REASON_CODE attributes are used.
380 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
381 * associated with this wiphy must be down and will follow.
383 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
384 * channel for the specified amount of time. This can be used to do
385 * off-channel operations like transmit a Public Action frame and wait for
386 * a response while being associated to an AP on another channel.
387 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
388 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
389 * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
390 * optionally used to specify additional channel parameters.
391 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
392 * to remain on the channel. This command is also used as an event to
393 * notify when the requested duration starts (it may take a while for the
394 * driver to schedule this time due to other concurrent needs for the
396 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
397 * that will be included with any events pertaining to this request;
398 * the cookie is also used to cancel the request.
399 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
400 * pending remain-on-channel duration if the desired operation has been
401 * completed prior to expiration of the originally requested duration.
402 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
403 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
404 * uniquely identify the request.
405 * This command is also used as an event to notify when a requested
406 * remain-on-channel duration has expired.
408 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
409 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
410 * and @NL80211_ATTR_TX_RATES the set of allowed rates.
412 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
413 * (via @NL80211_CMD_FRAME) for processing in userspace. This command
414 * requires an interface index, a frame type attribute (optional for
415 * backward compatibility reasons, if not given assumes action frames)
416 * and a match attribute containing the first few bytes of the frame
417 * that should match, e.g. a single byte for only a category match or
418 * four bytes for vendor frames including the OUI. The registration
419 * cannot be dropped, but is removed automatically when the netlink
420 * socket is closed. Multiple registrations can be made.
421 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
422 * backward compatibility
423 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
424 * command is used both as a request to transmit a management frame and
425 * as an event indicating reception of a frame that was not processed in
426 * kernel code, but is for us (i.e., which may need to be processed in a
427 * user space application). %NL80211_ATTR_FRAME is used to specify the
428 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
429 * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
430 * which channel the frame is to be transmitted or was received. If this
431 * channel is not the current channel (remain-on-channel or the
432 * operational channel) the device will switch to the given channel and
433 * transmit the frame, optionally waiting for a response for the time
434 * specified using %NL80211_ATTR_DURATION. When called, this operation
435 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
436 * TX status event pertaining to the TX request.
437 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
438 * management frames at CCK rate or not in 2GHz band.
439 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
440 * command may be used with the corresponding cookie to cancel the wait
441 * time if it is known that it is no longer necessary.
442 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
443 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
444 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
445 * the TX command and %NL80211_ATTR_FRAME includes the contents of the
446 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
448 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
449 * backward compatibility.
450 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
451 * is used to configure connection quality monitoring notification trigger
453 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
454 * command is used as an event to indicate the that a trigger level was
456 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
457 * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
458 * by %NL80211_ATTR_IFINDEX) shall operate on.
459 * In case multiple channels are supported by the device, the mechanism
460 * with which it switches channels is implementation-defined.
461 * When a monitor interface is given, it can only switch channel while
462 * no other interfaces are operating to avoid disturbing the operation
463 * of any other interfaces, and other interfaces will again take
464 * precedence when they are used.
466 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
468 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
469 * mesh config parameters may be given.
470 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
471 * network is determined by the network interface.
473 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
474 * notification. This event is used to indicate that an unprotected
475 * deauthentication frame was dropped when MFP is in use.
476 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
477 * notification. This event is used to indicate that an unprotected
478 * disassociation frame was dropped when MFP is in use.
480 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
481 * beacon or probe response from a compatible mesh peer. This is only
482 * sent while no station information (sta_info) exists for the new peer
483 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
484 * reception of this notification, userspace may decide to create a new
485 * station (@NL80211_CMD_NEW_STATION). To stop this notification from
486 * reoccurring, the userspace authentication daemon may want to create the
487 * new station with the AUTHENTICATED flag unset and maybe change it later
488 * depending on the authentication result.
490 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
491 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
492 * Since wireless is more complex than wired ethernet, it supports
493 * various triggers. These triggers can be configured through this
494 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
495 * more background information, see
496 * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
498 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
499 * the necessary information for supporting GTK rekey offload. This
500 * feature is typically used during WoWLAN. The configuration data
501 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
502 * contains the data in sub-attributes). After rekeying happened,
503 * this command may also be sent by the driver as an MLME event to
504 * inform userspace of the new replay counter.
506 * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
507 * of PMKSA caching dandidates.
509 * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
510 * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
512 * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
513 * (or GO) interface (i.e. hostapd) to ask for unexpected frames to
514 * implement sending deauth to stations that send unexpected class 3
515 * frames. Also used as the event sent by the kernel when such a frame
517 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
518 * other attributes like the interface index are present.
519 * If used as the command it must have an interface index and you can
520 * only unsubscribe from the event by closing the socket. Subscription
521 * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
523 * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
524 * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
525 * and wasn't already in a 4-addr VLAN. The event will be sent similarly
526 * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
528 * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
529 * by sending a null data frame to it and reporting when the frame is
530 * acknowleged. This is used to allow timing out inactive clients. Uses
531 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
532 * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
533 * up the event with the request. The event includes the same data and
534 * has %NL80211_ATTR_ACK set if the frame was ACKed.
536 * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
537 * other BSSes when any interfaces are in AP mode. This helps implement
538 * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
539 * messages. Note that per PHY only one application may register.
541 * @NL80211_CMD_MAX: highest used command number
542 * @__NL80211_CMD_AFTER_LAST: internal use
544 enum nl80211_commands
{
545 /* don't change the order or add anything between, this is ABI! */
548 NL80211_CMD_GET_WIPHY
, /* can dump */
549 NL80211_CMD_SET_WIPHY
,
550 NL80211_CMD_NEW_WIPHY
,
551 NL80211_CMD_DEL_WIPHY
,
553 NL80211_CMD_GET_INTERFACE
, /* can dump */
554 NL80211_CMD_SET_INTERFACE
,
555 NL80211_CMD_NEW_INTERFACE
,
556 NL80211_CMD_DEL_INTERFACE
,
563 NL80211_CMD_GET_BEACON
,
564 NL80211_CMD_SET_BEACON
,
565 NL80211_CMD_NEW_BEACON
,
566 NL80211_CMD_DEL_BEACON
,
568 NL80211_CMD_GET_STATION
,
569 NL80211_CMD_SET_STATION
,
570 NL80211_CMD_NEW_STATION
,
571 NL80211_CMD_DEL_STATION
,
573 NL80211_CMD_GET_MPATH
,
574 NL80211_CMD_SET_MPATH
,
575 NL80211_CMD_NEW_MPATH
,
576 NL80211_CMD_DEL_MPATH
,
581 NL80211_CMD_REQ_SET_REG
,
583 NL80211_CMD_GET_MESH_CONFIG
,
584 NL80211_CMD_SET_MESH_CONFIG
,
586 NL80211_CMD_SET_MGMT_EXTRA_IE
/* reserved; not used */,
590 NL80211_CMD_GET_SCAN
,
591 NL80211_CMD_TRIGGER_SCAN
,
592 NL80211_CMD_NEW_SCAN_RESULTS
,
593 NL80211_CMD_SCAN_ABORTED
,
595 NL80211_CMD_REG_CHANGE
,
597 NL80211_CMD_AUTHENTICATE
,
598 NL80211_CMD_ASSOCIATE
,
599 NL80211_CMD_DEAUTHENTICATE
,
600 NL80211_CMD_DISASSOCIATE
,
602 NL80211_CMD_MICHAEL_MIC_FAILURE
,
604 NL80211_CMD_REG_BEACON_HINT
,
606 NL80211_CMD_JOIN_IBSS
,
607 NL80211_CMD_LEAVE_IBSS
,
609 NL80211_CMD_TESTMODE
,
613 NL80211_CMD_DISCONNECT
,
615 NL80211_CMD_SET_WIPHY_NETNS
,
617 NL80211_CMD_GET_SURVEY
,
618 NL80211_CMD_NEW_SURVEY_RESULTS
,
620 NL80211_CMD_SET_PMKSA
,
621 NL80211_CMD_DEL_PMKSA
,
622 NL80211_CMD_FLUSH_PMKSA
,
624 NL80211_CMD_REMAIN_ON_CHANNEL
,
625 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL
,
627 NL80211_CMD_SET_TX_BITRATE_MASK
,
629 NL80211_CMD_REGISTER_FRAME
,
630 NL80211_CMD_REGISTER_ACTION
= NL80211_CMD_REGISTER_FRAME
,
632 NL80211_CMD_ACTION
= NL80211_CMD_FRAME
,
633 NL80211_CMD_FRAME_TX_STATUS
,
634 NL80211_CMD_ACTION_TX_STATUS
= NL80211_CMD_FRAME_TX_STATUS
,
636 NL80211_CMD_SET_POWER_SAVE
,
637 NL80211_CMD_GET_POWER_SAVE
,
640 NL80211_CMD_NOTIFY_CQM
,
642 NL80211_CMD_SET_CHANNEL
,
643 NL80211_CMD_SET_WDS_PEER
,
645 NL80211_CMD_FRAME_WAIT_CANCEL
,
647 NL80211_CMD_JOIN_MESH
,
648 NL80211_CMD_LEAVE_MESH
,
650 NL80211_CMD_UNPROT_DEAUTHENTICATE
,
651 NL80211_CMD_UNPROT_DISASSOCIATE
,
653 NL80211_CMD_NEW_PEER_CANDIDATE
,
655 NL80211_CMD_GET_WOWLAN
,
656 NL80211_CMD_SET_WOWLAN
,
658 NL80211_CMD_START_SCHED_SCAN
,
659 NL80211_CMD_STOP_SCHED_SCAN
,
660 NL80211_CMD_SCHED_SCAN_RESULTS
,
661 NL80211_CMD_SCHED_SCAN_STOPPED
,
663 NL80211_CMD_SET_REKEY_OFFLOAD
,
665 NL80211_CMD_PMKSA_CANDIDATE
,
667 NL80211_CMD_TDLS_OPER
,
668 NL80211_CMD_TDLS_MGMT
,
670 NL80211_CMD_UNEXPECTED_FRAME
,
672 NL80211_CMD_PROBE_CLIENT
,
674 NL80211_CMD_REGISTER_BEACONS
,
676 NL80211_CMD_UNEXPECTED_4ADDR_FRAME
,
678 /* add new commands above here */
680 /* used to define NL80211_CMD_MAX below */
681 __NL80211_CMD_AFTER_LAST
,
682 NL80211_CMD_MAX
= __NL80211_CMD_AFTER_LAST
- 1
686 * Allow user space programs to use #ifdef on new commands by defining them
689 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
690 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
691 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
692 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
693 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
694 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
695 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
696 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
698 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
700 /* source-level API compatibility */
701 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
702 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
703 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
706 * enum nl80211_attrs - nl80211 netlink attributes
708 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
710 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
711 * /sys/class/ieee80211/<phyname>/index
712 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
713 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
714 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
715 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
716 * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
717 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
719 * NL80211_CHAN_HT20 = HT20 only
720 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
721 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
722 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
723 * less than or equal to the RTS threshold; allowed range: 1..255;
724 * dot11ShortRetryLimit; u8
725 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
726 * greater than the RTS threshold; allowed range: 1..255;
727 * dot11ShortLongLimit; u8
728 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
729 * length in octets for frames; allowed range: 256..8000, disable
730 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
731 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
732 * larger than or equal to this use RTS/CTS handshake); allowed range:
733 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
734 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
735 * section 7.3.2.9; dot11CoverageClass; u8
737 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
738 * @NL80211_ATTR_IFNAME: network interface name
739 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
741 * @NL80211_ATTR_MAC: MAC address (various uses)
743 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
744 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
746 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
747 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
748 * section 7.3.2.25.1, e.g. 0x000FAC04)
749 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
750 * CCMP keys, each six bytes in little endian
752 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
753 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
754 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
755 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
757 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
758 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
759 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
760 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
761 * IEEE 802.11 7.3.1.6 (u16).
762 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
763 * rates as defined by IEEE 802.11 7.3.2.2 but without the length
764 * restriction (at most %NL80211_MAX_SUPP_RATES).
765 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
766 * to, or the AP interface the station was originally added to to.
767 * @NL80211_ATTR_STA_INFO: information about a station, part of station info
768 * given for %NL80211_CMD_GET_STATION, nested attribute containing
769 * info as possible, see &enum nl80211_sta_info.
771 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
772 * consisting of a nested array.
774 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
775 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
776 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
777 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
778 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
779 * &enum nl80211_mpath_info.
781 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
782 * &enum nl80211_mntr_flags.
784 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
785 * current regulatory domain should be set to or is already set to.
786 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
787 * to query the CRDA to retrieve one regulatory domain. This attribute can
788 * also be used by userspace to query the kernel for the currently set
789 * regulatory domain. We chose an alpha2 as that is also used by the
790 * IEEE-802.11d country information element to identify a country.
791 * Users can also simply ask the wireless core to set regulatory domain
792 * to a specific alpha2.
793 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
796 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
797 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
799 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
801 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
802 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
803 * restriction (at most %NL80211_MAX_SUPP_RATES).
805 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
806 * association request when used with NL80211_CMD_NEW_STATION)
808 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
809 * supported interface types, each a flag attribute with the number
810 * of the interface mode.
812 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
813 * %NL80211_CMD_SET_MGMT_EXTRA_IE.
815 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
816 * %NL80211_CMD_SET_MGMT_EXTRA_IE).
818 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
819 * a single scan request, a wiphy attribute.
820 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
821 * scan with a single scheduled scan request, a wiphy attribute.
822 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
823 * that can be added to a scan request
824 * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
825 * elements that can be added to a scheduled scan request
826 * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
827 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
829 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
830 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
831 * scanning and include a zero-length SSID (wildcard) for wildcard scan
832 * @NL80211_ATTR_BSS: scan result BSS
834 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
835 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
836 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
837 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
839 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
840 * an array of command numbers (i.e. a mapping index to command number)
841 * that the driver for the given wiphy supports.
843 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
844 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
845 * NL80211_CMD_ASSOCIATE events
846 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
847 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
848 * represented as a u32
849 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
850 * %NL80211_CMD_DISASSOCIATE, u16
852 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
855 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
856 * due to considerations from a beacon hint. This attribute reflects
857 * the state of the channel _before_ the beacon hint processing. This
858 * attributes consists of a nested attribute containing
859 * NL80211_FREQUENCY_ATTR_*
860 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
861 * due to considerations from a beacon hint. This attribute reflects
862 * the state of the channel _after_ the beacon hint processing. This
863 * attributes consists of a nested attribute containing
864 * NL80211_FREQUENCY_ATTR_*
866 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
869 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
870 * for other networks on different channels
872 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
873 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
875 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
876 * used for the association (&enum nl80211_mfp, represented as a u32);
877 * this attribute can be used
878 * with %NL80211_CMD_ASSOCIATE request
880 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
881 * &struct nl80211_sta_flag_update.
883 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
884 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
885 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
886 * request, the driver will assume that the port is unauthorized until
887 * authorized by user space. Otherwise, port is marked authorized by
888 * default in station mode.
889 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
890 * ethertype that will be used for key negotiation. It can be
891 * specified with the associate and connect commands. If it is not
892 * specified, the value defaults to 0x888E (PAE, 802.1X). This
893 * attribute is also used as a flag in the wiphy information to
894 * indicate that protocols other than PAE are supported.
895 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
896 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
897 * ethertype frames used for key negotiation must not be encrypted.
899 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
900 * We recommend using nested, driver-specific attributes within this.
902 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
903 * event was due to the AP disconnecting the station, and not due to
904 * a local disconnect request.
905 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
907 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
908 * that protected APs should be used. This is also used with NEW_BEACON to
909 * indicate that the BSS is to use protection.
911 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
912 * to indicate which unicast key ciphers will be used with the connection
914 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
915 * indicate which group key cipher will be used with the connection (a
917 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
918 * indicate which WPA version(s) the AP we want to associate with is using
919 * (a u32 with flags from &enum nl80211_wpa_versions).
920 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
921 * indicate which key management algorithm(s) to use (an array of u32).
923 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
924 * sent out by the card, for ROAM and successful CONNECT events.
925 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
926 * sent by peer, for ROAM and successful CONNECT events.
928 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
929 * commands to specify using a reassociate frame
931 * @NL80211_ATTR_KEY: key information in a nested attribute with
932 * %NL80211_KEY_* sub-attributes
933 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
934 * and join_ibss(), key information is in a nested attribute each
935 * with %NL80211_KEY_* sub-attributes
937 * @NL80211_ATTR_PID: Process ID of a network namespace.
939 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
940 * dumps. This number increases whenever the object list being
941 * dumped changes, and as such userspace can verify that it has
942 * obtained a complete and consistent snapshot by verifying that
943 * all dump messages contain the same generation number. If it
944 * changed then the list changed and the dump should be repeated
945 * completely from scratch.
947 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
949 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
950 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
951 * containing info as possible, see &enum survey_info.
953 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
954 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
955 * cache, a wiphy attribute.
957 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
958 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
959 * specifies the maximum duration that can be requested with the
960 * remain-on-channel operation, in milliseconds, u32.
962 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
964 * @NL80211_ATTR_TX_RATES: Nested set of attributes
965 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
966 * enum nl80211_band value is used as the index (nla_type() of the nested
967 * data. If a band is not included, it will be configured to allow all
968 * rates based on negotiated supported rates information. This attribute
969 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
971 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
972 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
973 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
974 * @NL80211_CMD_REGISTER_FRAME command.
975 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
976 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
977 * information about which frame types can be transmitted with
978 * %NL80211_CMD_FRAME.
979 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
980 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
981 * information about which frame types can be registered for RX.
983 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
984 * acknowledged by the recipient.
986 * @NL80211_ATTR_CQM: connection quality monitor configuration in a
987 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
989 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
990 * is requesting a local authentication/association state change without
991 * invoking actual management frame exchange. This can be used with
992 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
993 * NL80211_CMD_DISASSOCIATE.
995 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
996 * connected to this BSS.
998 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
999 * &enum nl80211_tx_power_setting for possible values.
1000 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
1001 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
1002 * for non-automatic settings.
1004 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
1005 * means support for per-station GTKs.
1007 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
1008 * This can be used to mask out antennas which are not attached or should
1009 * not be used for transmitting. If an antenna is not selected in this
1010 * bitmap the hardware is not allowed to transmit on this antenna.
1012 * Each bit represents one antenna, starting with antenna 1 at the first
1013 * bit. Depending on which antennas are selected in the bitmap, 802.11n
1014 * drivers can derive which chainmasks to use (if all antennas belonging to
1015 * a particular chain are disabled this chain should be disabled) and if
1016 * a chain has diversity antennas wether diversity should be used or not.
1017 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
1018 * derived from the available chains after applying the antenna mask.
1019 * Non-802.11n drivers can derive wether to use diversity or not.
1020 * Drivers may reject configurations or RX/TX mask combinations they cannot
1021 * support by returning -EINVAL.
1023 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
1024 * This can be used to mask out antennas which are not attached or should
1025 * not be used for receiving. If an antenna is not selected in this bitmap
1026 * the hardware should not be configured to receive on this antenna.
1027 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
1029 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
1030 * for configuration as TX antennas via the above parameters.
1032 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
1033 * for configuration as RX antennas via the above parameters.
1035 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
1037 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
1038 * transmitted on another channel when the channel given doesn't match
1039 * the current channel. If the current channel doesn't match and this
1040 * flag isn't set, the frame will be rejected. This is also used as an
1041 * nl80211 capability flag.
1043 * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
1045 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
1046 * attributes, specifying what a key should be set as default as.
1047 * See &enum nl80211_key_default_types.
1049 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
1050 * changed once the mesh is active.
1051 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
1052 * containing attributes from &enum nl80211_meshconf_params.
1053 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
1054 * allows auth frames in a mesh to be passed to userspace for processing via
1055 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
1056 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
1057 * defined in &enum nl80211_plink_state. Used when userspace is
1058 * driving the peer link management state machine.
1059 * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
1061 * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
1062 * capabilities, the supported WoWLAN triggers
1063 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
1064 * indicate which WoW triggers should be enabled. This is also
1065 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
1068 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
1071 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
1072 * sets of attributes to match during scheduled scans. Only BSSs
1073 * that match any of the sets will be reported. These are
1074 * pass-thru filter rules.
1075 * For a match to succeed, the BSS must match all attributes of a
1076 * set. Since not every hardware supports matching all types of
1077 * attributes, there is no guarantee that the reported BSSs are
1078 * fully complying with the match sets and userspace needs to be
1079 * able to ignore them by itself.
1080 * Thus, the implementation is somewhat hardware-dependent, but
1081 * this is only an optimization and the userspace application
1082 * needs to handle all the non-filtered results anyway.
1083 * If the match attributes don't make sense when combined with
1084 * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
1085 * is included in the probe request, but the match attributes
1086 * will never let it go through), -EINVAL may be returned.
1087 * If ommited, no filtering is done.
1089 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
1090 * interface combinations. In each nested item, it contains attributes
1091 * defined in &enum nl80211_if_combination_attrs.
1092 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
1093 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
1094 * are managed in software: interfaces of these types aren't subject to
1095 * any restrictions in their number or combinations.
1097 * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
1098 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
1100 * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
1101 * nested array attribute containing an entry for each band, with the entry
1102 * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
1103 * without the length restriction (at most %NL80211_MAX_SUPP_RATES).
1105 * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
1106 * and Probe Response (when response to wildcard Probe Request); see
1107 * &enum nl80211_hidden_ssid, represented as a u32
1109 * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
1110 * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
1111 * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
1112 * driver (or firmware) replies to Probe Request frames.
1113 * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
1114 * Response frames. This is used with %NL80211_CMD_NEW_BEACON and
1115 * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
1116 * (Re)Association Response frames when the driver (or firmware) replies to
1117 * (Re)Association Request frames.
1119 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
1120 * of the station, see &enum nl80211_sta_wme_attr.
1121 * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
1124 * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
1125 * roaming to another AP in the same ESS if the signal lever is low.
1127 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
1128 * candidate information, see &enum nl80211_pmksa_candidate_attr.
1130 * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
1131 * for management frames transmission. In order to avoid p2p probe/action
1132 * frames are being transmitted at CCK rate in 2GHz band, the user space
1133 * applications use this attribute.
1134 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
1135 * %NL80211_CMD_FRAME commands.
1137 * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
1138 * request, link setup confirm, link teardown, etc.). Values are
1139 * described in the TDLS (802.11z) specification.
1140 * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
1141 * TDLS conversation between two devices.
1142 * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
1143 * &enum nl80211_tdls_operation, represented as a u8.
1144 * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
1145 * as a TDLS peer sta.
1146 * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
1147 * procedures should be performed by sending TDLS packets via
1148 * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
1149 * used for asking the driver to perform a TDLS operation.
1151 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
1152 * that have AP support to indicate that they have the AP SME integrated
1153 * with support for the features listed in this attribute, see
1154 * &enum nl80211_ap_sme_features.
1156 * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
1157 * the driver to not wait for an acknowledgement. Note that due to this,
1158 * it will also not give a status callback nor return a cookie. This is
1159 * mostly useful for probe responses to save airtime.
1161 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
1162 * &enum nl80211_feature_flags and is advertised in wiphy information.
1163 * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
1165 * requests while operating in AP-mode.
1166 * This attribute holds a bitmap of the supported protocols for
1167 * offloading (see &enum nl80211_probe_resp_offload_support_attr).
1169 * @NL80211_ATTR_MAX: highest attribute number currently defined
1170 * @__NL80211_ATTR_AFTER_LAST: internal use
1172 enum nl80211_attrs
{
1173 /* don't change the order or add anything between, this is ABI! */
1174 NL80211_ATTR_UNSPEC
,
1177 NL80211_ATTR_WIPHY_NAME
,
1179 NL80211_ATTR_IFINDEX
,
1180 NL80211_ATTR_IFNAME
,
1181 NL80211_ATTR_IFTYPE
,
1185 NL80211_ATTR_KEY_DATA
,
1186 NL80211_ATTR_KEY_IDX
,
1187 NL80211_ATTR_KEY_CIPHER
,
1188 NL80211_ATTR_KEY_SEQ
,
1189 NL80211_ATTR_KEY_DEFAULT
,
1191 NL80211_ATTR_BEACON_INTERVAL
,
1192 NL80211_ATTR_DTIM_PERIOD
,
1193 NL80211_ATTR_BEACON_HEAD
,
1194 NL80211_ATTR_BEACON_TAIL
,
1196 NL80211_ATTR_STA_AID
,
1197 NL80211_ATTR_STA_FLAGS
,
1198 NL80211_ATTR_STA_LISTEN_INTERVAL
,
1199 NL80211_ATTR_STA_SUPPORTED_RATES
,
1200 NL80211_ATTR_STA_VLAN
,
1201 NL80211_ATTR_STA_INFO
,
1203 NL80211_ATTR_WIPHY_BANDS
,
1205 NL80211_ATTR_MNTR_FLAGS
,
1207 NL80211_ATTR_MESH_ID
,
1208 NL80211_ATTR_STA_PLINK_ACTION
,
1209 NL80211_ATTR_MPATH_NEXT_HOP
,
1210 NL80211_ATTR_MPATH_INFO
,
1212 NL80211_ATTR_BSS_CTS_PROT
,
1213 NL80211_ATTR_BSS_SHORT_PREAMBLE
,
1214 NL80211_ATTR_BSS_SHORT_SLOT_TIME
,
1216 NL80211_ATTR_HT_CAPABILITY
,
1218 NL80211_ATTR_SUPPORTED_IFTYPES
,
1220 NL80211_ATTR_REG_ALPHA2
,
1221 NL80211_ATTR_REG_RULES
,
1223 NL80211_ATTR_MESH_CONFIG
,
1225 NL80211_ATTR_BSS_BASIC_RATES
,
1227 NL80211_ATTR_WIPHY_TXQ_PARAMS
,
1228 NL80211_ATTR_WIPHY_FREQ
,
1229 NL80211_ATTR_WIPHY_CHANNEL_TYPE
,
1231 NL80211_ATTR_KEY_DEFAULT_MGMT
,
1233 NL80211_ATTR_MGMT_SUBTYPE
,
1236 NL80211_ATTR_MAX_NUM_SCAN_SSIDS
,
1238 NL80211_ATTR_SCAN_FREQUENCIES
,
1239 NL80211_ATTR_SCAN_SSIDS
,
1240 NL80211_ATTR_GENERATION
, /* replaces old SCAN_GENERATION */
1243 NL80211_ATTR_REG_INITIATOR
,
1244 NL80211_ATTR_REG_TYPE
,
1246 NL80211_ATTR_SUPPORTED_COMMANDS
,
1250 NL80211_ATTR_AUTH_TYPE
,
1251 NL80211_ATTR_REASON_CODE
,
1253 NL80211_ATTR_KEY_TYPE
,
1255 NL80211_ATTR_MAX_SCAN_IE_LEN
,
1256 NL80211_ATTR_CIPHER_SUITES
,
1258 NL80211_ATTR_FREQ_BEFORE
,
1259 NL80211_ATTR_FREQ_AFTER
,
1261 NL80211_ATTR_FREQ_FIXED
,
1264 NL80211_ATTR_WIPHY_RETRY_SHORT
,
1265 NL80211_ATTR_WIPHY_RETRY_LONG
,
1266 NL80211_ATTR_WIPHY_FRAG_THRESHOLD
,
1267 NL80211_ATTR_WIPHY_RTS_THRESHOLD
,
1269 NL80211_ATTR_TIMED_OUT
,
1271 NL80211_ATTR_USE_MFP
,
1273 NL80211_ATTR_STA_FLAGS2
,
1275 NL80211_ATTR_CONTROL_PORT
,
1277 NL80211_ATTR_TESTDATA
,
1279 NL80211_ATTR_PRIVACY
,
1281 NL80211_ATTR_DISCONNECTED_BY_AP
,
1282 NL80211_ATTR_STATUS_CODE
,
1284 NL80211_ATTR_CIPHER_SUITES_PAIRWISE
,
1285 NL80211_ATTR_CIPHER_SUITE_GROUP
,
1286 NL80211_ATTR_WPA_VERSIONS
,
1287 NL80211_ATTR_AKM_SUITES
,
1289 NL80211_ATTR_REQ_IE
,
1290 NL80211_ATTR_RESP_IE
,
1292 NL80211_ATTR_PREV_BSSID
,
1301 NL80211_ATTR_SURVEY_INFO
,
1304 NL80211_ATTR_MAX_NUM_PMKIDS
,
1306 NL80211_ATTR_DURATION
,
1308 NL80211_ATTR_COOKIE
,
1310 NL80211_ATTR_WIPHY_COVERAGE_CLASS
,
1312 NL80211_ATTR_TX_RATES
,
1314 NL80211_ATTR_FRAME_MATCH
,
1318 NL80211_ATTR_PS_STATE
,
1322 NL80211_ATTR_LOCAL_STATE_CHANGE
,
1324 NL80211_ATTR_AP_ISOLATE
,
1326 NL80211_ATTR_WIPHY_TX_POWER_SETTING
,
1327 NL80211_ATTR_WIPHY_TX_POWER_LEVEL
,
1329 NL80211_ATTR_TX_FRAME_TYPES
,
1330 NL80211_ATTR_RX_FRAME_TYPES
,
1331 NL80211_ATTR_FRAME_TYPE
,
1333 NL80211_ATTR_CONTROL_PORT_ETHERTYPE
,
1334 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT
,
1336 NL80211_ATTR_SUPPORT_IBSS_RSN
,
1338 NL80211_ATTR_WIPHY_ANTENNA_TX
,
1339 NL80211_ATTR_WIPHY_ANTENNA_RX
,
1341 NL80211_ATTR_MCAST_RATE
,
1343 NL80211_ATTR_OFFCHANNEL_TX_OK
,
1345 NL80211_ATTR_BSS_HT_OPMODE
,
1347 NL80211_ATTR_KEY_DEFAULT_TYPES
,
1349 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION
,
1351 NL80211_ATTR_MESH_SETUP
,
1353 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX
,
1354 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX
,
1356 NL80211_ATTR_SUPPORT_MESH_AUTH
,
1357 NL80211_ATTR_STA_PLINK_STATE
,
1359 NL80211_ATTR_WOWLAN_TRIGGERS
,
1360 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED
,
1362 NL80211_ATTR_SCHED_SCAN_INTERVAL
,
1364 NL80211_ATTR_INTERFACE_COMBINATIONS
,
1365 NL80211_ATTR_SOFTWARE_IFTYPES
,
1367 NL80211_ATTR_REKEY_DATA
,
1369 NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS
,
1370 NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN
,
1372 NL80211_ATTR_SCAN_SUPP_RATES
,
1374 NL80211_ATTR_HIDDEN_SSID
,
1376 NL80211_ATTR_IE_PROBE_RESP
,
1377 NL80211_ATTR_IE_ASSOC_RESP
,
1379 NL80211_ATTR_STA_WME
,
1380 NL80211_ATTR_SUPPORT_AP_UAPSD
,
1382 NL80211_ATTR_ROAM_SUPPORT
,
1384 NL80211_ATTR_SCHED_SCAN_MATCH
,
1385 NL80211_ATTR_MAX_MATCH_SETS
,
1387 NL80211_ATTR_PMKSA_CANDIDATE
,
1389 NL80211_ATTR_TX_NO_CCK_RATE
,
1391 NL80211_ATTR_TDLS_ACTION
,
1392 NL80211_ATTR_TDLS_DIALOG_TOKEN
,
1393 NL80211_ATTR_TDLS_OPERATION
,
1394 NL80211_ATTR_TDLS_SUPPORT
,
1395 NL80211_ATTR_TDLS_EXTERNAL_SETUP
,
1397 NL80211_ATTR_DEVICE_AP_SME
,
1399 NL80211_ATTR_DONT_WAIT_FOR_ACK
,
1401 NL80211_ATTR_FEATURE_FLAGS
,
1403 NL80211_ATTR_PROBE_RESP_OFFLOAD
,
1405 /* add attributes here, update the policy in nl80211.c */
1407 __NL80211_ATTR_AFTER_LAST
,
1408 NL80211_ATTR_MAX
= __NL80211_ATTR_AFTER_LAST
- 1
1411 /* source-level API compatibility */
1412 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
1413 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
1416 * Allow user space programs to use #ifdef on new attributes by defining them
1419 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
1420 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
1421 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
1422 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
1423 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
1424 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
1425 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
1426 #define NL80211_ATTR_IE NL80211_ATTR_IE
1427 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
1428 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
1429 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
1430 #define NL80211_ATTR_SSID NL80211_ATTR_SSID
1431 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
1432 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
1433 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
1434 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
1435 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
1436 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
1437 #define NL80211_ATTR_KEY NL80211_ATTR_KEY
1438 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
1439 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
1441 #define NL80211_MAX_SUPP_RATES 32
1442 #define NL80211_MAX_SUPP_REG_RULES 32
1443 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
1444 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
1445 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
1446 #define NL80211_HT_CAPABILITY_LEN 26
1448 #define NL80211_MAX_NR_CIPHER_SUITES 5
1449 #define NL80211_MAX_NR_AKM_SUITES 2
1452 * enum nl80211_iftype - (virtual) interface types
1454 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
1455 * @NL80211_IFTYPE_ADHOC: independent BSS member
1456 * @NL80211_IFTYPE_STATION: managed BSS member
1457 * @NL80211_IFTYPE_AP: access point
1458 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
1459 * are a bit special in that they must always be tied to a pre-existing
1460 * AP type interface.
1461 * @NL80211_IFTYPE_WDS: wireless distribution interface
1462 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
1463 * @NL80211_IFTYPE_MESH_POINT: mesh point
1464 * @NL80211_IFTYPE_P2P_CLIENT: P2P client
1465 * @NL80211_IFTYPE_P2P_GO: P2P group owner
1466 * @NL80211_IFTYPE_MAX: highest interface type number currently defined
1467 * @NUM_NL80211_IFTYPES: number of defined interface types
1469 * These values are used with the %NL80211_ATTR_IFTYPE
1470 * to set the type of an interface.
1473 enum nl80211_iftype
{
1474 NL80211_IFTYPE_UNSPECIFIED
,
1475 NL80211_IFTYPE_ADHOC
,
1476 NL80211_IFTYPE_STATION
,
1478 NL80211_IFTYPE_AP_VLAN
,
1480 NL80211_IFTYPE_MONITOR
,
1481 NL80211_IFTYPE_MESH_POINT
,
1482 NL80211_IFTYPE_P2P_CLIENT
,
1483 NL80211_IFTYPE_P2P_GO
,
1486 NUM_NL80211_IFTYPES
,
1487 NL80211_IFTYPE_MAX
= NUM_NL80211_IFTYPES
- 1
1491 * enum nl80211_sta_flags - station flags
1493 * Station flags. When a station is added to an AP interface, it is
1494 * assumed to be already associated (and hence authenticated.)
1496 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
1497 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
1498 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
1499 * with short barker preamble
1500 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
1501 * @NL80211_STA_FLAG_MFP: station uses management frame protection
1502 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
1503 * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer
1504 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
1505 * @__NL80211_STA_FLAG_AFTER_LAST: internal use
1507 enum nl80211_sta_flags
{
1508 __NL80211_STA_FLAG_INVALID
,
1509 NL80211_STA_FLAG_AUTHORIZED
,
1510 NL80211_STA_FLAG_SHORT_PREAMBLE
,
1511 NL80211_STA_FLAG_WME
,
1512 NL80211_STA_FLAG_MFP
,
1513 NL80211_STA_FLAG_AUTHENTICATED
,
1514 NL80211_STA_FLAG_TDLS_PEER
,
1517 __NL80211_STA_FLAG_AFTER_LAST
,
1518 NL80211_STA_FLAG_MAX
= __NL80211_STA_FLAG_AFTER_LAST
- 1
1522 * struct nl80211_sta_flag_update - station flags mask/set
1523 * @mask: mask of station flags to set
1524 * @set: which values to set them to
1526 * Both mask and set contain bits as per &enum nl80211_sta_flags.
1528 struct nl80211_sta_flag_update
{
1531 } __attribute__((packed
));
1534 * enum nl80211_rate_info - bitrate information
1536 * These attribute types are used with %NL80211_STA_INFO_TXRATE
1537 * when getting information about the bitrate of a station.
1539 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
1540 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
1541 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
1542 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
1543 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
1544 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
1545 * @__NL80211_RATE_INFO_AFTER_LAST: internal use
1547 enum nl80211_rate_info
{
1548 __NL80211_RATE_INFO_INVALID
,
1549 NL80211_RATE_INFO_BITRATE
,
1550 NL80211_RATE_INFO_MCS
,
1551 NL80211_RATE_INFO_40_MHZ_WIDTH
,
1552 NL80211_RATE_INFO_SHORT_GI
,
1555 __NL80211_RATE_INFO_AFTER_LAST
,
1556 NL80211_RATE_INFO_MAX
= __NL80211_RATE_INFO_AFTER_LAST
- 1
1560 * enum nl80211_sta_bss_param - BSS information collected by STA
1562 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
1563 * when getting information about the bitrate of a station.
1565 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
1566 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
1567 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
1569 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
1571 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
1572 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
1573 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
1574 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
1576 enum nl80211_sta_bss_param
{
1577 __NL80211_STA_BSS_PARAM_INVALID
,
1578 NL80211_STA_BSS_PARAM_CTS_PROT
,
1579 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE
,
1580 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME
,
1581 NL80211_STA_BSS_PARAM_DTIM_PERIOD
,
1582 NL80211_STA_BSS_PARAM_BEACON_INTERVAL
,
1585 __NL80211_STA_BSS_PARAM_AFTER_LAST
,
1586 NL80211_STA_BSS_PARAM_MAX
= __NL80211_STA_BSS_PARAM_AFTER_LAST
- 1
1590 * enum nl80211_sta_info - station information
1592 * These attribute types are used with %NL80211_ATTR_STA_INFO
1593 * when getting information about a station.
1595 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
1596 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
1597 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
1598 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
1599 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
1600 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
1601 * containing info as possible, see &enum nl80211_rate_info
1602 * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
1603 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
1605 * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
1606 * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
1607 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
1608 * @NL80211_STA_INFO_LLID: the station's mesh LLID
1609 * @NL80211_STA_INFO_PLID: the station's mesh PLID
1610 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
1611 * (see %enum nl80211_plink_state)
1612 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
1613 * attribute, like NL80211_STA_INFO_TX_BITRATE.
1614 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
1615 * containing info as possible, see &enum nl80211_sta_bss_param
1616 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
1617 * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
1618 * @__NL80211_STA_INFO_AFTER_LAST: internal
1619 * @NL80211_STA_INFO_MAX: highest possible station info attribute
1621 enum nl80211_sta_info
{
1622 __NL80211_STA_INFO_INVALID
,
1623 NL80211_STA_INFO_INACTIVE_TIME
,
1624 NL80211_STA_INFO_RX_BYTES
,
1625 NL80211_STA_INFO_TX_BYTES
,
1626 NL80211_STA_INFO_LLID
,
1627 NL80211_STA_INFO_PLID
,
1628 NL80211_STA_INFO_PLINK_STATE
,
1629 NL80211_STA_INFO_SIGNAL
,
1630 NL80211_STA_INFO_TX_BITRATE
,
1631 NL80211_STA_INFO_RX_PACKETS
,
1632 NL80211_STA_INFO_TX_PACKETS
,
1633 NL80211_STA_INFO_TX_RETRIES
,
1634 NL80211_STA_INFO_TX_FAILED
,
1635 NL80211_STA_INFO_SIGNAL_AVG
,
1636 NL80211_STA_INFO_RX_BITRATE
,
1637 NL80211_STA_INFO_BSS_PARAM
,
1638 NL80211_STA_INFO_CONNECTED_TIME
,
1639 NL80211_STA_INFO_STA_FLAGS
,
1642 __NL80211_STA_INFO_AFTER_LAST
,
1643 NL80211_STA_INFO_MAX
= __NL80211_STA_INFO_AFTER_LAST
- 1
1647 * enum nl80211_mpath_flags - nl80211 mesh path flags
1649 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
1650 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
1651 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
1652 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
1653 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
1655 enum nl80211_mpath_flags
{
1656 NL80211_MPATH_FLAG_ACTIVE
= 1<<0,
1657 NL80211_MPATH_FLAG_RESOLVING
= 1<<1,
1658 NL80211_MPATH_FLAG_SN_VALID
= 1<<2,
1659 NL80211_MPATH_FLAG_FIXED
= 1<<3,
1660 NL80211_MPATH_FLAG_RESOLVED
= 1<<4,
1664 * enum nl80211_mpath_info - mesh path information
1666 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
1667 * information about a mesh path.
1669 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
1670 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
1671 * @NL80211_MPATH_INFO_SN: destination sequence number
1672 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
1673 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
1674 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
1675 * &enum nl80211_mpath_flags;
1676 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
1677 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
1678 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
1680 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
1682 enum nl80211_mpath_info
{
1683 __NL80211_MPATH_INFO_INVALID
,
1684 NL80211_MPATH_INFO_FRAME_QLEN
,
1685 NL80211_MPATH_INFO_SN
,
1686 NL80211_MPATH_INFO_METRIC
,
1687 NL80211_MPATH_INFO_EXPTIME
,
1688 NL80211_MPATH_INFO_FLAGS
,
1689 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT
,
1690 NL80211_MPATH_INFO_DISCOVERY_RETRIES
,
1693 __NL80211_MPATH_INFO_AFTER_LAST
,
1694 NL80211_MPATH_INFO_MAX
= __NL80211_MPATH_INFO_AFTER_LAST
- 1
1698 * enum nl80211_band_attr - band attributes
1699 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
1700 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
1701 * an array of nested frequency attributes
1702 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
1703 * an array of nested bitrate attributes
1704 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
1705 * defined in 802.11n
1706 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
1707 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
1708 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
1709 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
1710 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
1712 enum nl80211_band_attr
{
1713 __NL80211_BAND_ATTR_INVALID
,
1714 NL80211_BAND_ATTR_FREQS
,
1715 NL80211_BAND_ATTR_RATES
,
1717 NL80211_BAND_ATTR_HT_MCS_SET
,
1718 NL80211_BAND_ATTR_HT_CAPA
,
1719 NL80211_BAND_ATTR_HT_AMPDU_FACTOR
,
1720 NL80211_BAND_ATTR_HT_AMPDU_DENSITY
,
1723 __NL80211_BAND_ATTR_AFTER_LAST
,
1724 NL80211_BAND_ATTR_MAX
= __NL80211_BAND_ATTR_AFTER_LAST
- 1
1727 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
1730 * enum nl80211_frequency_attr - frequency attributes
1731 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
1732 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
1733 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
1734 * regulatory domain.
1735 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
1736 * permitted on this channel in current regulatory domain.
1737 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
1738 * on this channel in current regulatory domain.
1739 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
1740 * on this channel in current regulatory domain.
1741 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
1743 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
1745 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
1747 enum nl80211_frequency_attr
{
1748 __NL80211_FREQUENCY_ATTR_INVALID
,
1749 NL80211_FREQUENCY_ATTR_FREQ
,
1750 NL80211_FREQUENCY_ATTR_DISABLED
,
1751 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN
,
1752 NL80211_FREQUENCY_ATTR_NO_IBSS
,
1753 NL80211_FREQUENCY_ATTR_RADAR
,
1754 NL80211_FREQUENCY_ATTR_MAX_TX_POWER
,
1757 __NL80211_FREQUENCY_ATTR_AFTER_LAST
,
1758 NL80211_FREQUENCY_ATTR_MAX
= __NL80211_FREQUENCY_ATTR_AFTER_LAST
- 1
1761 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
1764 * enum nl80211_bitrate_attr - bitrate attributes
1765 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
1766 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
1767 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
1769 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
1771 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
1773 enum nl80211_bitrate_attr
{
1774 __NL80211_BITRATE_ATTR_INVALID
,
1775 NL80211_BITRATE_ATTR_RATE
,
1776 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE
,
1779 __NL80211_BITRATE_ATTR_AFTER_LAST
,
1780 NL80211_BITRATE_ATTR_MAX
= __NL80211_BITRATE_ATTR_AFTER_LAST
- 1
1784 * enum nl80211_initiator - Indicates the initiator of a reg domain request
1785 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
1786 * regulatory domain.
1787 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
1788 * regulatory domain.
1789 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
1790 * wireless core it thinks its knows the regulatory domain we should be in.
1791 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
1792 * 802.11 country information element with regulatory information it
1793 * thinks we should consider. cfg80211 only processes the country
1794 * code from the IE, and relies on the regulatory domain information
1795 * structure passed by userspace (CRDA) from our wireless-regdb.
1796 * If a channel is enabled but the country code indicates it should
1797 * be disabled we disable the channel and re-enable it upon disassociation.
1799 enum nl80211_reg_initiator
{
1800 NL80211_REGDOM_SET_BY_CORE
,
1801 NL80211_REGDOM_SET_BY_USER
,
1802 NL80211_REGDOM_SET_BY_DRIVER
,
1803 NL80211_REGDOM_SET_BY_COUNTRY_IE
,
1807 * enum nl80211_reg_type - specifies the type of regulatory domain
1808 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
1809 * to a specific country. When this is set you can count on the
1810 * ISO / IEC 3166 alpha2 country code being valid.
1811 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
1813 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
1814 * driver specific world regulatory domain. These do not apply system-wide
1815 * and are only applicable to the individual devices which have requested
1816 * them to be applied.
1817 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
1818 * of an intersection between two regulatory domains -- the previously
1819 * set regulatory domain on the system and the last accepted regulatory
1820 * domain request to be processed.
1822 enum nl80211_reg_type
{
1823 NL80211_REGDOM_TYPE_COUNTRY
,
1824 NL80211_REGDOM_TYPE_WORLD
,
1825 NL80211_REGDOM_TYPE_CUSTOM_WORLD
,
1826 NL80211_REGDOM_TYPE_INTERSECTION
,
1830 * enum nl80211_reg_rule_attr - regulatory rule attributes
1831 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
1832 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
1833 * considerations for a given frequency range. These are the
1834 * &enum nl80211_reg_rule_flags.
1835 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
1836 * rule in KHz. This is not a center of frequency but an actual regulatory
1838 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
1839 * in KHz. This is not a center a frequency but an actual regulatory
1841 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
1842 * frequency range, in KHz.
1843 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
1844 * for a given frequency range. The value is in mBi (100 * dBi).
1845 * If you don't have one then don't send this.
1846 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
1847 * a given frequency range. The value is in mBm (100 * dBm).
1848 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
1850 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
1852 enum nl80211_reg_rule_attr
{
1853 __NL80211_REG_RULE_ATTR_INVALID
,
1854 NL80211_ATTR_REG_RULE_FLAGS
,
1856 NL80211_ATTR_FREQ_RANGE_START
,
1857 NL80211_ATTR_FREQ_RANGE_END
,
1858 NL80211_ATTR_FREQ_RANGE_MAX_BW
,
1860 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN
,
1861 NL80211_ATTR_POWER_RULE_MAX_EIRP
,
1864 __NL80211_REG_RULE_ATTR_AFTER_LAST
,
1865 NL80211_REG_RULE_ATTR_MAX
= __NL80211_REG_RULE_ATTR_AFTER_LAST
- 1
1869 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
1870 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
1871 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
1872 * only report BSS with matching SSID.
1873 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
1874 * attribute number currently defined
1875 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
1877 enum nl80211_sched_scan_match_attr
{
1878 __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID
,
1880 NL80211_ATTR_SCHED_SCAN_MATCH_SSID
,
1883 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST
,
1884 NL80211_SCHED_SCAN_MATCH_ATTR_MAX
=
1885 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST
- 1
1889 * enum nl80211_reg_rule_flags - regulatory rule flags
1891 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
1892 * @NL80211_RRF_NO_CCK: CCK modulation not allowed
1893 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
1894 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
1895 * @NL80211_RRF_DFS: DFS support is required to be used
1896 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
1897 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
1898 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
1899 * @NL80211_RRF_NO_IBSS: no IBSS is allowed
1901 enum nl80211_reg_rule_flags
{
1902 NL80211_RRF_NO_OFDM
= 1<<0,
1903 NL80211_RRF_NO_CCK
= 1<<1,
1904 NL80211_RRF_NO_INDOOR
= 1<<2,
1905 NL80211_RRF_NO_OUTDOOR
= 1<<3,
1906 NL80211_RRF_DFS
= 1<<4,
1907 NL80211_RRF_PTP_ONLY
= 1<<5,
1908 NL80211_RRF_PTMP_ONLY
= 1<<6,
1909 NL80211_RRF_PASSIVE_SCAN
= 1<<7,
1910 NL80211_RRF_NO_IBSS
= 1<<8,
1914 * enum nl80211_survey_info - survey information
1916 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
1917 * when getting information about a survey.
1919 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
1920 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
1921 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
1922 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
1923 * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
1924 * spent on this channel
1925 * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
1926 * channel was sensed busy (either due to activity or energy detect)
1927 * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
1928 * channel was sensed busy
1929 * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
1931 * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
1933 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
1935 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
1937 enum nl80211_survey_info
{
1938 __NL80211_SURVEY_INFO_INVALID
,
1939 NL80211_SURVEY_INFO_FREQUENCY
,
1940 NL80211_SURVEY_INFO_NOISE
,
1941 NL80211_SURVEY_INFO_IN_USE
,
1942 NL80211_SURVEY_INFO_CHANNEL_TIME
,
1943 NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY
,
1944 NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY
,
1945 NL80211_SURVEY_INFO_CHANNEL_TIME_RX
,
1946 NL80211_SURVEY_INFO_CHANNEL_TIME_TX
,
1949 __NL80211_SURVEY_INFO_AFTER_LAST
,
1950 NL80211_SURVEY_INFO_MAX
= __NL80211_SURVEY_INFO_AFTER_LAST
- 1
1954 * enum nl80211_mntr_flags - monitor configuration flags
1956 * Monitor configuration flags.
1958 * @__NL80211_MNTR_FLAG_INVALID: reserved
1960 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
1961 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
1962 * @NL80211_MNTR_FLAG_CONTROL: pass control frames
1963 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
1964 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
1965 * overrides all other flags.
1967 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
1968 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
1970 enum nl80211_mntr_flags
{
1971 __NL80211_MNTR_FLAG_INVALID
,
1972 NL80211_MNTR_FLAG_FCSFAIL
,
1973 NL80211_MNTR_FLAG_PLCPFAIL
,
1974 NL80211_MNTR_FLAG_CONTROL
,
1975 NL80211_MNTR_FLAG_OTHER_BSS
,
1976 NL80211_MNTR_FLAG_COOK_FRAMES
,
1979 __NL80211_MNTR_FLAG_AFTER_LAST
,
1980 NL80211_MNTR_FLAG_MAX
= __NL80211_MNTR_FLAG_AFTER_LAST
- 1
1984 * enum nl80211_meshconf_params - mesh configuration parameters
1986 * Mesh configuration parameters. These can be changed while the mesh is
1989 * @__NL80211_MESHCONF_INVALID: internal use
1991 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
1992 * millisecond units, used by the Peer Link Open message
1994 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
1995 * millisecond units, used by the peer link management to close a peer link
1997 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
2000 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
2001 * on this mesh interface
2003 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
2004 * open retries that can be sent to establish a new peer link instance in a
2007 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
2010 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
2011 * open peer links when we detect compatible mesh peers.
2013 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
2014 * containing a PREQ that an MP can send to a particular destination (path
2017 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
2020 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
2021 * until giving up on a path discovery (in milliseconds)
2023 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
2024 * points receiving a PREQ shall consider the forwarding information from the
2025 * root to be valid. (TU = time unit)
2027 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
2028 * TUs) during which an MP can send only one action frame containing a PREQ
2031 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
2032 * that it takes for an HWMP information element to propagate across the mesh
2034 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
2036 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
2037 * source mesh point for path selection elements.
2039 * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
2040 * root announcements are transmitted.
2042 * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
2043 * access to a broader network beyond the MBSS. This is done via Root
2044 * Announcement frames.
2046 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
2048 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
2050 enum nl80211_meshconf_params
{
2051 __NL80211_MESHCONF_INVALID
,
2052 NL80211_MESHCONF_RETRY_TIMEOUT
,
2053 NL80211_MESHCONF_CONFIRM_TIMEOUT
,
2054 NL80211_MESHCONF_HOLDING_TIMEOUT
,
2055 NL80211_MESHCONF_MAX_PEER_LINKS
,
2056 NL80211_MESHCONF_MAX_RETRIES
,
2057 NL80211_MESHCONF_TTL
,
2058 NL80211_MESHCONF_AUTO_OPEN_PLINKS
,
2059 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES
,
2060 NL80211_MESHCONF_PATH_REFRESH_TIME
,
2061 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT
,
2062 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT
,
2063 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL
,
2064 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME
,
2065 NL80211_MESHCONF_HWMP_ROOTMODE
,
2066 NL80211_MESHCONF_ELEMENT_TTL
,
2067 NL80211_MESHCONF_HWMP_RANN_INTERVAL
,
2068 NL80211_MESHCONF_GATE_ANNOUNCEMENTS
,
2071 __NL80211_MESHCONF_ATTR_AFTER_LAST
,
2072 NL80211_MESHCONF_ATTR_MAX
= __NL80211_MESHCONF_ATTR_AFTER_LAST
- 1
2076 * enum nl80211_mesh_setup_params - mesh setup parameters
2078 * Mesh setup parameters. These are used to start/join a mesh and cannot be
2079 * changed while the mesh is active.
2081 * @__NL80211_MESH_SETUP_INVALID: Internal use
2083 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
2084 * vendor specific path selection algorithm or disable it to use the default
2087 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
2088 * vendor specific path metric or disable it to use the default Airtime
2091 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
2092 * robust security network ie, or a vendor specific information element that
2093 * vendors will use to identify the path selection methods and metrics in use.
2095 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
2096 * daemon will be authenticating mesh candidates.
2098 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
2099 * daemon will be securing peer link frames. AMPE is a secured version of Mesh
2100 * Peering Management (MPM) and is implemented with the assistance of a
2101 * userspace daemon. When this flag is set, the kernel will send peer
2102 * management frames to a userspace daemon that will implement AMPE
2103 * functionality (security capabilities selection, key confirmation, and key
2104 * management). When the flag is unset (default), the kernel can autonomously
2105 * complete (unsecured) mesh peering without the need of a userspace daemon.
2107 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
2108 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
2110 enum nl80211_mesh_setup_params
{
2111 __NL80211_MESH_SETUP_INVALID
,
2112 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL
,
2113 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC
,
2114 NL80211_MESH_SETUP_IE
,
2115 NL80211_MESH_SETUP_USERSPACE_AUTH
,
2116 NL80211_MESH_SETUP_USERSPACE_AMPE
,
2119 __NL80211_MESH_SETUP_ATTR_AFTER_LAST
,
2120 NL80211_MESH_SETUP_ATTR_MAX
= __NL80211_MESH_SETUP_ATTR_AFTER_LAST
- 1
2124 * enum nl80211_txq_attr - TX queue parameter attributes
2125 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
2126 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
2127 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
2129 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
2130 * 2^n-1 in the range 1..32767]
2131 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
2132 * 2^n-1 in the range 1..32767]
2133 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
2134 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
2135 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
2137 enum nl80211_txq_attr
{
2138 __NL80211_TXQ_ATTR_INVALID
,
2139 NL80211_TXQ_ATTR_QUEUE
,
2140 NL80211_TXQ_ATTR_TXOP
,
2141 NL80211_TXQ_ATTR_CWMIN
,
2142 NL80211_TXQ_ATTR_CWMAX
,
2143 NL80211_TXQ_ATTR_AIFS
,
2146 __NL80211_TXQ_ATTR_AFTER_LAST
,
2147 NL80211_TXQ_ATTR_MAX
= __NL80211_TXQ_ATTR_AFTER_LAST
- 1
2150 enum nl80211_txq_q
{
2157 enum nl80211_channel_type
{
2160 NL80211_CHAN_HT40MINUS
,
2161 NL80211_CHAN_HT40PLUS
2165 * enum nl80211_bss - netlink attributes for a BSS
2167 * @__NL80211_BSS_INVALID: invalid
2168 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
2169 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
2170 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
2171 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
2172 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
2173 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
2174 * raw information elements from the probe response/beacon (bin);
2175 * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
2176 * from a Probe Response frame; otherwise they are from a Beacon frame.
2177 * However, if the driver does not indicate the source of the IEs, these
2178 * IEs may be from either frame subtype.
2179 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
2180 * in mBm (100 * dBm) (s32)
2181 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
2182 * in unspecified units, scaled to 0..100 (u8)
2183 * @NL80211_BSS_STATUS: status, if this BSS is "used"
2184 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
2185 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
2186 * elements from a Beacon frame (bin); not present if no Beacon frame has
2188 * @__NL80211_BSS_AFTER_LAST: internal
2189 * @NL80211_BSS_MAX: highest BSS attribute
2192 __NL80211_BSS_INVALID
,
2194 NL80211_BSS_FREQUENCY
,
2196 NL80211_BSS_BEACON_INTERVAL
,
2197 NL80211_BSS_CAPABILITY
,
2198 NL80211_BSS_INFORMATION_ELEMENTS
,
2199 NL80211_BSS_SIGNAL_MBM
,
2200 NL80211_BSS_SIGNAL_UNSPEC
,
2202 NL80211_BSS_SEEN_MS_AGO
,
2203 NL80211_BSS_BEACON_IES
,
2206 __NL80211_BSS_AFTER_LAST
,
2207 NL80211_BSS_MAX
= __NL80211_BSS_AFTER_LAST
- 1
2211 * enum nl80211_bss_status - BSS "status"
2212 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
2213 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
2214 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
2216 * The BSS status is a BSS attribute in scan dumps, which
2217 * indicates the status the interface has wrt. this BSS.
2219 enum nl80211_bss_status
{
2220 NL80211_BSS_STATUS_AUTHENTICATED
,
2221 NL80211_BSS_STATUS_ASSOCIATED
,
2222 NL80211_BSS_STATUS_IBSS_JOINED
,
2226 * enum nl80211_auth_type - AuthenticationType
2228 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
2229 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
2230 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
2231 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
2232 * @__NL80211_AUTHTYPE_NUM: internal
2233 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
2234 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
2235 * trying multiple times); this is invalid in netlink -- leave out
2236 * the attribute for this on CONNECT commands.
2238 enum nl80211_auth_type
{
2239 NL80211_AUTHTYPE_OPEN_SYSTEM
,
2240 NL80211_AUTHTYPE_SHARED_KEY
,
2241 NL80211_AUTHTYPE_FT
,
2242 NL80211_AUTHTYPE_NETWORK_EAP
,
2245 __NL80211_AUTHTYPE_NUM
,
2246 NL80211_AUTHTYPE_MAX
= __NL80211_AUTHTYPE_NUM
- 1,
2247 NL80211_AUTHTYPE_AUTOMATIC
2251 * enum nl80211_key_type - Key Type
2252 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
2253 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
2254 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
2255 * @NUM_NL80211_KEYTYPES: number of defined key types
2257 enum nl80211_key_type
{
2258 NL80211_KEYTYPE_GROUP
,
2259 NL80211_KEYTYPE_PAIRWISE
,
2260 NL80211_KEYTYPE_PEERKEY
,
2262 NUM_NL80211_KEYTYPES
2266 * enum nl80211_mfp - Management frame protection state
2267 * @NL80211_MFP_NO: Management frame protection not used
2268 * @NL80211_MFP_REQUIRED: Management frame protection required
2272 NL80211_MFP_REQUIRED
,
2275 enum nl80211_wpa_versions
{
2276 NL80211_WPA_VERSION_1
= 1 << 0,
2277 NL80211_WPA_VERSION_2
= 1 << 1,
2281 * enum nl80211_key_default_types - key default types
2282 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
2283 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
2285 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
2287 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
2289 enum nl80211_key_default_types
{
2290 __NL80211_KEY_DEFAULT_TYPE_INVALID
,
2291 NL80211_KEY_DEFAULT_TYPE_UNICAST
,
2292 NL80211_KEY_DEFAULT_TYPE_MULTICAST
,
2294 NUM_NL80211_KEY_DEFAULT_TYPES
2298 * enum nl80211_key_attributes - key attributes
2299 * @__NL80211_KEY_INVALID: invalid
2300 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
2301 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
2303 * @NL80211_KEY_IDX: key ID (u8, 0-3)
2304 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
2305 * section 7.3.2.25.1, e.g. 0x000FAC04)
2306 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
2307 * CCMP keys, each six bytes in little endian
2308 * @NL80211_KEY_DEFAULT: flag indicating default key
2309 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
2310 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
2311 * specified the default depends on whether a MAC address was
2312 * given with the command using the key or not (u32)
2313 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
2314 * attributes, specifying what a key should be set as default as.
2315 * See &enum nl80211_key_default_types.
2316 * @__NL80211_KEY_AFTER_LAST: internal
2317 * @NL80211_KEY_MAX: highest key attribute
2319 enum nl80211_key_attributes
{
2320 __NL80211_KEY_INVALID
,
2325 NL80211_KEY_DEFAULT
,
2326 NL80211_KEY_DEFAULT_MGMT
,
2328 NL80211_KEY_DEFAULT_TYPES
,
2331 __NL80211_KEY_AFTER_LAST
,
2332 NL80211_KEY_MAX
= __NL80211_KEY_AFTER_LAST
- 1
2336 * enum nl80211_tx_rate_attributes - TX rate set attributes
2337 * @__NL80211_TXRATE_INVALID: invalid
2338 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
2339 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
2340 * 1 = 500 kbps) but without the IE length restriction (at most
2341 * %NL80211_MAX_SUPP_RATES in a single array).
2342 * @__NL80211_TXRATE_AFTER_LAST: internal
2343 * @NL80211_TXRATE_MAX: highest TX rate attribute
2345 enum nl80211_tx_rate_attributes
{
2346 __NL80211_TXRATE_INVALID
,
2347 NL80211_TXRATE_LEGACY
,
2350 __NL80211_TXRATE_AFTER_LAST
,
2351 NL80211_TXRATE_MAX
= __NL80211_TXRATE_AFTER_LAST
- 1
2355 * enum nl80211_band - Frequency band
2356 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
2357 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
2364 enum nl80211_ps_state
{
2365 NL80211_PS_DISABLED
,
2370 * enum nl80211_attr_cqm - connection quality monitor attributes
2371 * @__NL80211_ATTR_CQM_INVALID: invalid
2372 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
2373 * the threshold for the RSSI level at which an event will be sent. Zero
2375 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
2376 * the minimum amount the RSSI level must change after an event before a
2377 * new event may be issued (to reduce effects of RSSI oscillation).
2378 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
2379 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
2380 * consecutive packets were not acknowledged by the peer
2381 * @__NL80211_ATTR_CQM_AFTER_LAST: internal
2382 * @NL80211_ATTR_CQM_MAX: highest key attribute
2384 enum nl80211_attr_cqm
{
2385 __NL80211_ATTR_CQM_INVALID
,
2386 NL80211_ATTR_CQM_RSSI_THOLD
,
2387 NL80211_ATTR_CQM_RSSI_HYST
,
2388 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT
,
2389 NL80211_ATTR_CQM_PKT_LOSS_EVENT
,
2392 __NL80211_ATTR_CQM_AFTER_LAST
,
2393 NL80211_ATTR_CQM_MAX
= __NL80211_ATTR_CQM_AFTER_LAST
- 1
2397 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
2398 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
2399 * configured threshold
2400 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
2401 * configured threshold
2403 enum nl80211_cqm_rssi_threshold_event
{
2404 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
,
2405 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
,
2410 * enum nl80211_tx_power_setting - TX power adjustment
2411 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
2412 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
2413 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
2415 enum nl80211_tx_power_setting
{
2416 NL80211_TX_POWER_AUTOMATIC
,
2417 NL80211_TX_POWER_LIMITED
,
2418 NL80211_TX_POWER_FIXED
,
2422 * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
2423 * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
2424 * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
2425 * a zero bit are ignored
2426 * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
2427 * a bit for each byte in the pattern. The lowest-order bit corresponds
2428 * to the first byte of the pattern, but the bytes of the pattern are
2429 * in a little-endian-like format, i.e. the 9th byte of the pattern
2430 * corresponds to the lowest-order bit in the second byte of the mask.
2431 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
2432 * xx indicates "don't care") would be represented by a pattern of
2433 * twelve zero bytes, and a mask of "0xed,0x07".
2434 * Note that the pattern matching is done as though frames were not
2435 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
2436 * first (including SNAP header unpacking) and then matched.
2437 * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
2438 * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
2440 enum nl80211_wowlan_packet_pattern_attr
{
2441 __NL80211_WOWLAN_PKTPAT_INVALID
,
2442 NL80211_WOWLAN_PKTPAT_MASK
,
2443 NL80211_WOWLAN_PKTPAT_PATTERN
,
2445 NUM_NL80211_WOWLAN_PKTPAT
,
2446 MAX_NL80211_WOWLAN_PKTPAT
= NUM_NL80211_WOWLAN_PKTPAT
- 1,
2450 * struct nl80211_wowlan_pattern_support - pattern support information
2451 * @max_patterns: maximum number of patterns supported
2452 * @min_pattern_len: minimum length of each pattern
2453 * @max_pattern_len: maximum length of each pattern
2455 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
2456 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
2457 * capability information given by the kernel to userspace.
2459 struct nl80211_wowlan_pattern_support
{
2461 __u32 min_pattern_len
;
2462 __u32 max_pattern_len
;
2463 } __attribute__((packed
));
2466 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
2467 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
2468 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
2469 * the chip into a special state -- works best with chips that have
2470 * support for low-power operation already (flag)
2471 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
2472 * is detected is implementation-specific (flag)
2473 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
2474 * by 16 repetitions of MAC addr, anywhere in payload) (flag)
2475 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
2476 * which are passed in an array of nested attributes, each nested attribute
2477 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
2478 * Each pattern defines a wakeup packet. The matching is done on the MSDU,
2479 * i.e. as though the packet was an 802.3 packet, so the pattern matching
2480 * is done after the packet is converted to the MSDU.
2482 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
2483 * carrying a &struct nl80211_wowlan_pattern_support.
2484 * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
2485 * used when setting, used only to indicate that GTK rekeying is supported
2486 * by the device (flag)
2487 * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
2488 * done by the device) (flag)
2489 * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
2491 * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
2492 * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
2493 * (on devices that have rfkill in the device) (flag)
2494 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
2495 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
2497 enum nl80211_wowlan_triggers
{
2498 __NL80211_WOWLAN_TRIG_INVALID
,
2499 NL80211_WOWLAN_TRIG_ANY
,
2500 NL80211_WOWLAN_TRIG_DISCONNECT
,
2501 NL80211_WOWLAN_TRIG_MAGIC_PKT
,
2502 NL80211_WOWLAN_TRIG_PKT_PATTERN
,
2503 NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED
,
2504 NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE
,
2505 NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST
,
2506 NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE
,
2507 NL80211_WOWLAN_TRIG_RFKILL_RELEASE
,
2510 NUM_NL80211_WOWLAN_TRIG
,
2511 MAX_NL80211_WOWLAN_TRIG
= NUM_NL80211_WOWLAN_TRIG
- 1
2515 * enum nl80211_iface_limit_attrs - limit attributes
2516 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
2517 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
2518 * can be chosen from this set of interface types (u32)
2519 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
2520 * flag attribute for each interface type in this set
2521 * @NUM_NL80211_IFACE_LIMIT: number of attributes
2522 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
2524 enum nl80211_iface_limit_attrs
{
2525 NL80211_IFACE_LIMIT_UNSPEC
,
2526 NL80211_IFACE_LIMIT_MAX
,
2527 NL80211_IFACE_LIMIT_TYPES
,
2530 NUM_NL80211_IFACE_LIMIT
,
2531 MAX_NL80211_IFACE_LIMIT
= NUM_NL80211_IFACE_LIMIT
- 1
2535 * enum nl80211_if_combination_attrs -- interface combination attributes
2537 * @NL80211_IFACE_COMB_UNSPEC: (reserved)
2538 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
2539 * for given interface types, see &enum nl80211_iface_limit_attrs.
2540 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
2541 * interfaces that can be created in this group. This number doesn't
2542 * apply to interfaces purely managed in software, which are listed
2543 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
2544 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
2545 * beacon intervals within this group must be all the same even for
2546 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
2547 * the infrastructure network's beacon interval.
2548 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
2549 * different channels may be used within this group.
2550 * @NUM_NL80211_IFACE_COMB: number of attributes
2551 * @MAX_NL80211_IFACE_COMB: highest attribute number
2554 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
2555 * => allows an AP and a STA that must match BIs
2557 * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
2558 * => allows 8 of AP/GO
2560 * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
2561 * => allows two STAs on different channels
2563 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
2564 * => allows a STA plus three P2P interfaces
2566 * The list of these four possiblities could completely be contained
2567 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
2568 * that any of these groups must match.
2570 * "Combinations" of just a single interface will not be listed here,
2571 * a single interface of any valid interface type is assumed to always
2572 * be possible by itself. This means that implicitly, for each valid
2573 * interface type, the following group always exists:
2574 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
2576 enum nl80211_if_combination_attrs
{
2577 NL80211_IFACE_COMB_UNSPEC
,
2578 NL80211_IFACE_COMB_LIMITS
,
2579 NL80211_IFACE_COMB_MAXNUM
,
2580 NL80211_IFACE_COMB_STA_AP_BI_MATCH
,
2581 NL80211_IFACE_COMB_NUM_CHANNELS
,
2584 NUM_NL80211_IFACE_COMB
,
2585 MAX_NL80211_IFACE_COMB
= NUM_NL80211_IFACE_COMB
- 1
2590 * enum nl80211_plink_state - state of a mesh peer link finite state machine
2592 * @NL80211_PLINK_LISTEN: initial state, considered the implicit
2593 * state of non existant mesh peer links
2594 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
2596 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
2597 * from this mesh peer
2598 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
2599 * received from this mesh peer
2600 * @NL80211_PLINK_ESTAB: mesh peer link is established
2601 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
2602 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
2603 * plink are discarded
2604 * @NUM_NL80211_PLINK_STATES: number of peer link states
2605 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
2607 enum nl80211_plink_state
{
2608 NL80211_PLINK_LISTEN
,
2609 NL80211_PLINK_OPN_SNT
,
2610 NL80211_PLINK_OPN_RCVD
,
2611 NL80211_PLINK_CNF_RCVD
,
2612 NL80211_PLINK_ESTAB
,
2613 NL80211_PLINK_HOLDING
,
2614 NL80211_PLINK_BLOCKED
,
2617 NUM_NL80211_PLINK_STATES
,
2618 MAX_NL80211_PLINK_STATES
= NUM_NL80211_PLINK_STATES
- 1
2621 #define NL80211_KCK_LEN 16
2622 #define NL80211_KEK_LEN 16
2623 #define NL80211_REPLAY_CTR_LEN 8
2626 * enum nl80211_rekey_data - attributes for GTK rekey offload
2627 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
2628 * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
2629 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
2630 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
2631 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
2632 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
2634 enum nl80211_rekey_data
{
2635 __NL80211_REKEY_DATA_INVALID
,
2636 NL80211_REKEY_DATA_KEK
,
2637 NL80211_REKEY_DATA_KCK
,
2638 NL80211_REKEY_DATA_REPLAY_CTR
,
2641 NUM_NL80211_REKEY_DATA
,
2642 MAX_NL80211_REKEY_DATA
= NUM_NL80211_REKEY_DATA
- 1
2646 * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
2647 * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
2649 * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
2651 * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
2652 * element in Beacon frames but zero out each byte in the SSID
2654 enum nl80211_hidden_ssid
{
2655 NL80211_HIDDEN_SSID_NOT_IN_USE
,
2656 NL80211_HIDDEN_SSID_ZERO_LEN
,
2657 NL80211_HIDDEN_SSID_ZERO_CONTENTS
2661 * enum nl80211_sta_wme_attr - station WME attributes
2662 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
2663 * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
2664 * is the same as the AC bitmap in the QoS info field.
2665 * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
2666 * as the MAX_SP field in the QoS info field (but already shifted down).
2667 * @__NL80211_STA_WME_AFTER_LAST: internal
2668 * @NL80211_STA_WME_MAX: highest station WME attribute
2670 enum nl80211_sta_wme_attr
{
2671 __NL80211_STA_WME_INVALID
,
2672 NL80211_STA_WME_UAPSD_QUEUES
,
2673 NL80211_STA_WME_MAX_SP
,
2676 __NL80211_STA_WME_AFTER_LAST
,
2677 NL80211_STA_WME_MAX
= __NL80211_STA_WME_AFTER_LAST
- 1
2681 * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
2682 * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
2683 * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
2685 * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
2686 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
2687 * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
2689 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
2692 enum nl80211_pmksa_candidate_attr
{
2693 __NL80211_PMKSA_CANDIDATE_INVALID
,
2694 NL80211_PMKSA_CANDIDATE_INDEX
,
2695 NL80211_PMKSA_CANDIDATE_BSSID
,
2696 NL80211_PMKSA_CANDIDATE_PREAUTH
,
2699 NUM_NL80211_PMKSA_CANDIDATE
,
2700 MAX_NL80211_PMKSA_CANDIDATE
= NUM_NL80211_PMKSA_CANDIDATE
- 1
2704 * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
2705 * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
2706 * @NL80211_TDLS_SETUP: Setup TDLS link
2707 * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
2708 * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
2709 * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
2711 enum nl80211_tdls_operation
{
2712 NL80211_TDLS_DISCOVERY_REQ
,
2714 NL80211_TDLS_TEARDOWN
,
2715 NL80211_TDLS_ENABLE_LINK
,
2716 NL80211_TDLS_DISABLE_LINK
,
2720 * enum nl80211_ap_sme_features - device-integrated AP features
2721 * Reserved for future use, no bits are defined in
2722 * NL80211_ATTR_DEVICE_AP_SME yet.
2723 enum nl80211_ap_sme_features {
2728 * enum nl80211_feature_flags - device/driver features
2729 * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
2730 * TX status to the socket error queue when requested with the
2733 enum nl80211_feature_flags
{
2734 NL80211_FEATURE_SK_TX_STATUS
= 1 << 0,
2738 * enum nl80211_probe_resp_offload_support_attr - optional supported
2739 * protocols for probe-response offloading by the driver/FW.
2740 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
2741 * Each enum value represents a bit in the bitmap of supported
2742 * protocols. Typically a subset of probe-requests belonging to a
2743 * supported protocol will be excluded from offload and uploaded
2746 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
2747 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
2748 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
2749 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
2751 enum nl80211_probe_resp_offload_support_attr
{
2752 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS
= 1<<0,
2753 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2
= 1<<1,
2754 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P
= 1<<2,
2755 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U
= 1<<3,
2758 #endif /* __LINUX_NL80211_H */