]>
git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/linux/percpu-refcount.h
3 * (C) 2012 Google, Inc.
4 * Author: Kent Overstreet <koverstreet@google.com>
6 * This implements a refcount with similar semantics to atomic_t - atomic_inc(),
7 * atomic_dec_and_test() - but percpu.
9 * There's one important difference between percpu refs and normal atomic_t
10 * refcounts; you have to keep track of your initial refcount, and then when you
11 * start shutting down you call percpu_ref_kill() _before_ dropping the initial
14 * The refcount will have a range of 0 to ((1U << 31) - 1), i.e. one bit less
15 * than an atomic_t - this is because of the way shutdown works, see
16 * percpu_ref_kill()/PERCPU_COUNT_BIAS.
18 * Before you call percpu_ref_kill(), percpu_ref_put() does not check for the
19 * refcount hitting 0 - it can't, if it was in percpu mode. percpu_ref_kill()
20 * puts the ref back in single atomic_t mode, collecting the per cpu refs and
21 * issuing the appropriate barriers, and then marks the ref as shutting down so
22 * that percpu_ref_put() will check for the ref hitting 0. After it returns,
23 * it's safe to drop the initial ref.
27 * See fs/aio.c for some example usage; it's used there for struct kioctx, which
28 * is created when userspaces calls io_setup(), and destroyed when userspace
29 * calls io_destroy() or the process exits.
31 * In the aio code, kill_ioctx() is called when we wish to destroy a kioctx; it
32 * calls percpu_ref_kill(), then hlist_del_rcu() and synchronize_rcu() to remove
33 * the kioctx from the proccess's list of kioctxs - after that, there can't be
34 * any new users of the kioctx (from lookup_ioctx()) and it's then safe to drop
35 * the initial ref with percpu_ref_put().
37 * Code that does a two stage shutdown like this often needs some kind of
38 * explicit synchronization to ensure the initial refcount can only be dropped
39 * once - percpu_ref_kill() does this for you, it returns true once and false if
40 * someone else already called it. The aio code uses it this way, but it's not
41 * necessary if the code has some other mechanism to synchronize teardown.
45 #ifndef _LINUX_PERCPU_REFCOUNT_H
46 #define _LINUX_PERCPU_REFCOUNT_H
48 #include <linux/atomic.h>
49 #include <linux/kernel.h>
50 #include <linux/percpu.h>
51 #include <linux/rcupdate.h>
52 #include <linux/gfp.h>
55 typedef void (percpu_ref_func_t
)(struct percpu_ref
*);
57 /* flags set in the lower bits of percpu_ref->percpu_count_ptr */
59 __PERCPU_REF_ATOMIC
= 1LU << 0, /* operating in atomic mode */
60 __PERCPU_REF_DEAD
= 1LU << 1, /* (being) killed */
61 __PERCPU_REF_ATOMIC_DEAD
= __PERCPU_REF_ATOMIC
| __PERCPU_REF_DEAD
,
63 __PERCPU_REF_FLAG_BITS
= 2,
66 /* @flags for percpu_ref_init() */
69 * Start w/ ref == 1 in atomic mode. Can be switched to percpu
70 * operation using percpu_ref_switch_to_percpu(). If initialized
71 * with this flag, the ref will stay in atomic mode until
72 * percpu_ref_switch_to_percpu() is invoked on it.
74 PERCPU_REF_INIT_ATOMIC
= 1 << 0,
77 * Start dead w/ ref == 0 in atomic mode. Must be revived with
78 * percpu_ref_reinit() before used. Implies INIT_ATOMIC.
80 PERCPU_REF_INIT_DEAD
= 1 << 1,
86 * The low bit of the pointer indicates whether the ref is in percpu
87 * mode; if set, then get/put will manipulate the atomic_t.
89 unsigned long percpu_count_ptr
;
90 percpu_ref_func_t
*release
;
91 percpu_ref_func_t
*confirm_switch
;
96 int __must_check
percpu_ref_init(struct percpu_ref
*ref
,
97 percpu_ref_func_t
*release
, unsigned int flags
,
99 void percpu_ref_exit(struct percpu_ref
*ref
);
100 void percpu_ref_switch_to_atomic(struct percpu_ref
*ref
,
101 percpu_ref_func_t
*confirm_switch
);
102 void percpu_ref_switch_to_percpu(struct percpu_ref
*ref
);
103 void percpu_ref_kill_and_confirm(struct percpu_ref
*ref
,
104 percpu_ref_func_t
*confirm_kill
);
105 void percpu_ref_reinit(struct percpu_ref
*ref
);
108 * percpu_ref_kill - drop the initial ref
109 * @ref: percpu_ref to kill
111 * Must be used to drop the initial ref on a percpu refcount; must be called
112 * precisely once before shutdown.
114 * Puts @ref in non percpu mode, then does a call_rcu() before gathering up the
115 * percpu counters and dropping the initial ref.
117 static inline void percpu_ref_kill(struct percpu_ref
*ref
)
119 return percpu_ref_kill_and_confirm(ref
, NULL
);
123 * Internal helper. Don't use outside percpu-refcount proper. The
124 * function doesn't return the pointer and let the caller test it for NULL
125 * because doing so forces the compiler to generate two conditional
126 * branches as it can't assume that @ref->percpu_count is not NULL.
128 static inline bool __ref_is_percpu(struct percpu_ref
*ref
,
129 unsigned long __percpu
**percpu_countp
)
131 unsigned long percpu_ptr
;
134 * The value of @ref->percpu_count_ptr is tested for
135 * !__PERCPU_REF_ATOMIC, which may be set asynchronously, and then
136 * used as a pointer. If the compiler generates a separate fetch
137 * when using it as a pointer, __PERCPU_REF_ATOMIC may be set in
138 * between contaminating the pointer value, meaning that
139 * ACCESS_ONCE() is required when fetching it.
141 * Also, we need a data dependency barrier to be paired with
142 * smp_store_release() in __percpu_ref_switch_to_percpu().
144 * Use lockless deref which contains both.
146 percpu_ptr
= lockless_dereference(ref
->percpu_count_ptr
);
149 * Theoretically, the following could test just ATOMIC; however,
150 * then we'd have to mask off DEAD separately as DEAD may be
151 * visible without ATOMIC if we race with percpu_ref_kill(). DEAD
152 * implies ATOMIC anyway. Test them together.
154 if (unlikely(percpu_ptr
& __PERCPU_REF_ATOMIC_DEAD
))
157 *percpu_countp
= (unsigned long __percpu
*)percpu_ptr
;
162 * percpu_ref_get_many - increment a percpu refcount
163 * @ref: percpu_ref to get
164 * @nr: number of references to get
166 * Analogous to atomic_long_add().
168 * This function is safe to call as long as @ref is between init and exit.
170 static inline void percpu_ref_get_many(struct percpu_ref
*ref
, unsigned long nr
)
172 unsigned long __percpu
*percpu_count
;
174 rcu_read_lock_sched();
176 if (__ref_is_percpu(ref
, &percpu_count
))
177 this_cpu_add(*percpu_count
, nr
);
179 atomic_long_add(nr
, &ref
->count
);
181 rcu_read_unlock_sched();
185 * percpu_ref_get - increment a percpu refcount
186 * @ref: percpu_ref to get
188 * Analagous to atomic_long_inc().
190 * This function is safe to call as long as @ref is between init and exit.
192 static inline void percpu_ref_get(struct percpu_ref
*ref
)
194 percpu_ref_get_many(ref
, 1);
198 * percpu_ref_tryget - try to increment a percpu refcount
199 * @ref: percpu_ref to try-get
201 * Increment a percpu refcount unless its count already reached zero.
202 * Returns %true on success; %false on failure.
204 * This function is safe to call as long as @ref is between init and exit.
206 static inline bool percpu_ref_tryget(struct percpu_ref
*ref
)
208 unsigned long __percpu
*percpu_count
;
211 rcu_read_lock_sched();
213 if (__ref_is_percpu(ref
, &percpu_count
)) {
214 this_cpu_inc(*percpu_count
);
217 ret
= atomic_long_inc_not_zero(&ref
->count
);
220 rcu_read_unlock_sched();
226 * percpu_ref_tryget_live - try to increment a live percpu refcount
227 * @ref: percpu_ref to try-get
229 * Increment a percpu refcount unless it has already been killed. Returns
230 * %true on success; %false on failure.
232 * Completion of percpu_ref_kill() in itself doesn't guarantee that this
233 * function will fail. For such guarantee, percpu_ref_kill_and_confirm()
234 * should be used. After the confirm_kill callback is invoked, it's
235 * guaranteed that no new reference will be given out by
236 * percpu_ref_tryget_live().
238 * This function is safe to call as long as @ref is between init and exit.
240 static inline bool percpu_ref_tryget_live(struct percpu_ref
*ref
)
242 unsigned long __percpu
*percpu_count
;
245 rcu_read_lock_sched();
247 if (__ref_is_percpu(ref
, &percpu_count
)) {
248 this_cpu_inc(*percpu_count
);
250 } else if (!(ref
->percpu_count_ptr
& __PERCPU_REF_DEAD
)) {
251 ret
= atomic_long_inc_not_zero(&ref
->count
);
254 rcu_read_unlock_sched();
260 * percpu_ref_put_many - decrement a percpu refcount
261 * @ref: percpu_ref to put
262 * @nr: number of references to put
264 * Decrement the refcount, and if 0, call the release function (which was passed
265 * to percpu_ref_init())
267 * This function is safe to call as long as @ref is between init and exit.
269 static inline void percpu_ref_put_many(struct percpu_ref
*ref
, unsigned long nr
)
271 unsigned long __percpu
*percpu_count
;
273 rcu_read_lock_sched();
275 if (__ref_is_percpu(ref
, &percpu_count
))
276 this_cpu_sub(*percpu_count
, nr
);
277 else if (unlikely(atomic_long_sub_and_test(nr
, &ref
->count
)))
280 rcu_read_unlock_sched();
284 * percpu_ref_put - decrement a percpu refcount
285 * @ref: percpu_ref to put
287 * Decrement the refcount, and if 0, call the release function (which was passed
288 * to percpu_ref_init())
290 * This function is safe to call as long as @ref is between init and exit.
292 static inline void percpu_ref_put(struct percpu_ref
*ref
)
294 percpu_ref_put_many(ref
, 1);
298 * percpu_ref_is_dying - test whether a percpu refcount is dying or dead
299 * @ref: percpu_ref to test
301 * Returns %true if @ref is dying or dead.
303 * This function is safe to call as long as @ref is between init and exit
304 * and the caller is responsible for synchronizing against state changes.
306 static inline bool percpu_ref_is_dying(struct percpu_ref
*ref
)
308 return ref
->percpu_count_ptr
& __PERCPU_REF_DEAD
;
312 * percpu_ref_is_zero - test whether a percpu refcount reached zero
313 * @ref: percpu_ref to test
315 * Returns %true if @ref reached zero.
317 * This function is safe to call as long as @ref is between init and exit.
319 static inline bool percpu_ref_is_zero(struct percpu_ref
*ref
)
321 unsigned long __percpu
*percpu_count
;
323 if (__ref_is_percpu(ref
, &percpu_count
))
325 return !atomic_long_read(&ref
->count
);