2 * Framework and drivers for configuring and reading different PHYs
3 * Based on code in sungem_phy.c and gianfar_phy.c
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
19 #include <linux/compiler.h>
20 #include <linux/spinlock.h>
21 #include <linux/ethtool.h>
22 #include <linux/mdio.h>
23 #include <linux/mii.h>
24 #include <linux/module.h>
25 #include <linux/timer.h>
26 #include <linux/workqueue.h>
27 #include <linux/mod_devicetable.h>
29 #include <linux/atomic.h>
31 #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
35 #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
36 SUPPORTED_10baseT_Full)
38 #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
39 SUPPORTED_100baseT_Full)
41 #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
42 SUPPORTED_1000baseT_Full)
44 #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
45 PHY_100BT_FEATURES | \
48 #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
53 * Set phydev->irq to PHY_POLL if interrupts are not supported,
54 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
55 * the attached driver handles the interrupt
58 #define PHY_IGNORE_INTERRUPT -2
60 #define PHY_HAS_INTERRUPT 0x00000001
61 #define PHY_HAS_MAGICANEG 0x00000002
62 #define PHY_IS_INTERNAL 0x00000004
64 /* Interface Mode definitions */
66 PHY_INTERFACE_MODE_NA
,
67 PHY_INTERFACE_MODE_MII
,
68 PHY_INTERFACE_MODE_GMII
,
69 PHY_INTERFACE_MODE_SGMII
,
70 PHY_INTERFACE_MODE_TBI
,
71 PHY_INTERFACE_MODE_REVMII
,
72 PHY_INTERFACE_MODE_RMII
,
73 PHY_INTERFACE_MODE_RGMII
,
74 PHY_INTERFACE_MODE_RGMII_ID
,
75 PHY_INTERFACE_MODE_RGMII_RXID
,
76 PHY_INTERFACE_MODE_RGMII_TXID
,
77 PHY_INTERFACE_MODE_RTBI
,
78 PHY_INTERFACE_MODE_SMII
,
79 PHY_INTERFACE_MODE_XGMII
,
80 PHY_INTERFACE_MODE_MOCA
,
81 PHY_INTERFACE_MODE_QSGMII
,
82 PHY_INTERFACE_MODE_MAX
,
86 * It maps 'enum phy_interface_t' found in include/linux/phy.h
87 * into the device tree binding of 'phy-mode', so that Ethernet
88 * device driver can get phy interface from device tree.
90 static inline const char *phy_modes(phy_interface_t interface
)
93 case PHY_INTERFACE_MODE_NA
:
95 case PHY_INTERFACE_MODE_MII
:
97 case PHY_INTERFACE_MODE_GMII
:
99 case PHY_INTERFACE_MODE_SGMII
:
101 case PHY_INTERFACE_MODE_TBI
:
103 case PHY_INTERFACE_MODE_REVMII
:
105 case PHY_INTERFACE_MODE_RMII
:
107 case PHY_INTERFACE_MODE_RGMII
:
109 case PHY_INTERFACE_MODE_RGMII_ID
:
111 case PHY_INTERFACE_MODE_RGMII_RXID
:
113 case PHY_INTERFACE_MODE_RGMII_TXID
:
115 case PHY_INTERFACE_MODE_RTBI
:
117 case PHY_INTERFACE_MODE_SMII
:
119 case PHY_INTERFACE_MODE_XGMII
:
121 case PHY_INTERFACE_MODE_MOCA
:
123 case PHY_INTERFACE_MODE_QSGMII
:
131 #define PHY_INIT_TIMEOUT 100000
132 #define PHY_STATE_TIME 1
133 #define PHY_FORCE_TIMEOUT 10
134 #define PHY_AN_TIMEOUT 10
136 #define PHY_MAX_ADDR 32
138 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
139 #define PHY_ID_FMT "%s:%02x"
142 * Need to be a little smaller than phydev->dev.bus_id to leave room
145 #define MII_BUS_ID_SIZE (20 - 3)
147 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
148 IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
149 #define MII_ADDR_C45 (1<<30)
155 * The Bus class for PHYs. Devices which provide access to
156 * PHYs should register using this structure
159 struct module
*owner
;
161 char id
[MII_BUS_ID_SIZE
];
163 int (*read
)(struct mii_bus
*bus
, int addr
, int regnum
);
164 int (*write
)(struct mii_bus
*bus
, int addr
, int regnum
, u16 val
);
165 int (*reset
)(struct mii_bus
*bus
);
168 * A lock to ensure that only one thing can read/write
169 * the MDIO bus at a time
171 struct mutex mdio_lock
;
173 struct device
*parent
;
175 MDIOBUS_ALLOCATED
= 1,
177 MDIOBUS_UNREGISTERED
,
182 /* list of all PHYs on bus */
183 struct phy_device
*phy_map
[PHY_MAX_ADDR
];
185 /* PHY addresses to be ignored when probing */
188 /* PHY addresses to ignore the TA/read failure */
189 u32 phy_ignore_ta_mask
;
192 * An array of interrupts, each PHY's interrupt at the index
193 * matching its address
195 int irq
[PHY_MAX_ADDR
];
197 #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
199 struct mii_bus
*mdiobus_alloc_size(size_t);
200 static inline struct mii_bus
*mdiobus_alloc(void)
202 return mdiobus_alloc_size(0);
205 int __mdiobus_register(struct mii_bus
*bus
, struct module
*owner
);
206 #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE)
207 void mdiobus_unregister(struct mii_bus
*bus
);
208 void mdiobus_free(struct mii_bus
*bus
);
209 struct mii_bus
*devm_mdiobus_alloc_size(struct device
*dev
, int sizeof_priv
);
210 static inline struct mii_bus
*devm_mdiobus_alloc(struct device
*dev
)
212 return devm_mdiobus_alloc_size(dev
, 0);
215 void devm_mdiobus_free(struct device
*dev
, struct mii_bus
*bus
);
216 struct phy_device
*mdiobus_scan(struct mii_bus
*bus
, int addr
);
218 #define PHY_INTERRUPT_DISABLED 0x0
219 #define PHY_INTERRUPT_ENABLED 0x80000000
221 /* PHY state machine states:
223 * DOWN: PHY device and driver are not ready for anything. probe
224 * should be called if and only if the PHY is in this state,
225 * given that the PHY device exists.
226 * - PHY driver probe function will, depending on the PHY, set
227 * the state to STARTING or READY
229 * STARTING: PHY device is coming up, and the ethernet driver is
230 * not ready. PHY drivers may set this in the probe function.
231 * If they do, they are responsible for making sure the state is
232 * eventually set to indicate whether the PHY is UP or READY,
233 * depending on the state when the PHY is done starting up.
234 * - PHY driver will set the state to READY
235 * - start will set the state to PENDING
237 * READY: PHY is ready to send and receive packets, but the
238 * controller is not. By default, PHYs which do not implement
239 * probe will be set to this state by phy_probe(). If the PHY
240 * driver knows the PHY is ready, and the PHY state is STARTING,
241 * then it sets this STATE.
242 * - start will set the state to UP
244 * PENDING: PHY device is coming up, but the ethernet driver is
245 * ready. phy_start will set this state if the PHY state is
247 * - PHY driver will set the state to UP when the PHY is ready
249 * UP: The PHY and attached device are ready to do work.
250 * Interrupts should be started here.
251 * - timer moves to AN
253 * AN: The PHY is currently negotiating the link state. Link is
254 * therefore down for now. phy_timer will set this state when it
255 * detects the state is UP. config_aneg will set this state
256 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
257 * - If autonegotiation finishes, but there's no link, it sets
258 * the state to NOLINK.
259 * - If aneg finishes with link, it sets the state to RUNNING,
260 * and calls adjust_link
261 * - If autonegotiation did not finish after an arbitrary amount
262 * of time, autonegotiation should be tried again if the PHY
263 * supports "magic" autonegotiation (back to AN)
264 * - If it didn't finish, and no magic_aneg, move to FORCING.
266 * NOLINK: PHY is up, but not currently plugged in.
267 * - If the timer notes that the link comes back, we move to RUNNING
268 * - config_aneg moves to AN
269 * - phy_stop moves to HALTED
271 * FORCING: PHY is being configured with forced settings
272 * - if link is up, move to RUNNING
273 * - If link is down, we drop to the next highest setting, and
274 * retry (FORCING) after a timeout
275 * - phy_stop moves to HALTED
277 * RUNNING: PHY is currently up, running, and possibly sending
278 * and/or receiving packets
279 * - timer will set CHANGELINK if we're polling (this ensures the
280 * link state is polled every other cycle of this state machine,
281 * which makes it every other second)
282 * - irq will set CHANGELINK
283 * - config_aneg will set AN
284 * - phy_stop moves to HALTED
286 * CHANGELINK: PHY experienced a change in link state
287 * - timer moves to RUNNING if link
288 * - timer moves to NOLINK if the link is down
289 * - phy_stop moves to HALTED
291 * HALTED: PHY is up, but no polling or interrupts are done. Or
292 * PHY is in an error state.
294 * - phy_start moves to RESUMING
296 * RESUMING: PHY was halted, but now wants to run again.
297 * - If we are forcing, or aneg is done, timer moves to RUNNING
298 * - If aneg is not done, timer moves to AN
299 * - phy_stop moves to HALTED
317 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
318 * @devices_in_package: Bit vector of devices present.
319 * @device_ids: The device identifer for each present device.
321 struct phy_c45_device_ids
{
322 u32 devices_in_package
;
326 /* phy_device: An instance of a PHY
328 * drv: Pointer to the driver for this PHY instance
329 * bus: Pointer to the bus this PHY is on
330 * dev: driver model device structure for this PHY
331 * phy_id: UID for this device found during discovery
332 * c45_ids: 802.3-c45 Device Identifers if is_c45.
333 * is_c45: Set to true if this phy uses clause 45 addressing.
334 * is_internal: Set to true if this phy is internal to a MAC.
335 * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc.
336 * has_fixups: Set to true if this phy has fixups/quirks.
337 * suspended: Set to true if this phy has been suspended successfully.
338 * state: state of the PHY for management purposes
339 * dev_flags: Device-specific flags used by the PHY driver.
340 * addr: Bus address of PHY
341 * link_timeout: The number of timer firings to wait before the
342 * giving up on the current attempt at acquiring a link
343 * irq: IRQ number of the PHY's interrupt (-1 if none)
344 * phy_timer: The timer for handling the state machine
345 * phy_queue: A work_queue for the interrupt
346 * attached_dev: The attached enet driver's device instance ptr
347 * adjust_link: Callback for the enet controller to respond to
348 * changes in the link state.
350 * speed, duplex, pause, supported, advertising, lp_advertising,
351 * and autoneg are used like in mii_if_info
353 * interrupts currently only supports enabled or disabled,
354 * but could be changed in the future to support enabling
355 * and disabling specific interrupts
357 * Contains some infrastructure for polling and interrupt
358 * handling, as well as handling shifts in PHY hardware state
361 struct mdio_device mdio
;
363 /* Information about the PHY type */
364 /* And management functions */
365 struct phy_driver
*drv
;
369 struct phy_c45_device_ids c45_ids
;
372 bool is_pseudo_fixed_link
;
376 enum phy_state state
;
380 phy_interface_t interface
;
383 * forced speed & duplex (no autoneg)
384 * partner speed & duplex & pause (autoneg)
391 /* The most recently read link state */
394 /* Enabled Interrupts */
397 /* Union of PHY and Attached devices' supported modes */
398 /* See mii.h for more info */
408 * Interrupt number for this PHY
409 * -1 means no interrupt
413 /* private data pointer */
414 /* For use by PHYs to maintain extra state */
417 /* Interrupt and Polling infrastructure */
418 struct work_struct phy_queue
;
419 struct delayed_work state_queue
;
420 atomic_t irq_disable
;
424 struct net_device
*attached_dev
;
428 void (*adjust_link
)(struct net_device
*dev
);
430 #define to_phy_device(d) container_of(to_mdio_device(d), \
431 struct phy_device, mdio)
433 /* struct phy_driver: Driver structure for a particular PHY type
435 * phy_id: The result of reading the UID registers of this PHY
436 * type, and ANDing them with the phy_id_mask. This driver
437 * only works for PHYs with IDs which match this field
438 * name: The friendly name of this PHY type
439 * phy_id_mask: Defines the important bits of the phy_id
440 * features: A list of features (speed, duplex, etc) supported
442 * flags: A bitfield defining certain other features this PHY
443 * supports (like interrupts)
444 * driver_data: static driver data
446 * The drivers must implement config_aneg and read_status. All
447 * other functions are optional. Note that none of these
448 * functions should be called from interrupt time. The goal is
449 * for the bus read/write functions to be able to block when the
450 * bus transaction is happening, and be freed up by an interrupt
451 * (The MPC85xx has this ability, though it is not currently
452 * supported in the driver).
457 unsigned int phy_id_mask
;
460 const void *driver_data
;
463 * Called to issue a PHY software reset
465 int (*soft_reset
)(struct phy_device
*phydev
);
468 * Called to initialize the PHY,
469 * including after a reset
471 int (*config_init
)(struct phy_device
*phydev
);
474 * Called during discovery. Used to set
475 * up device-specific structures, if any
477 int (*probe
)(struct phy_device
*phydev
);
479 /* PHY Power Management */
480 int (*suspend
)(struct phy_device
*phydev
);
481 int (*resume
)(struct phy_device
*phydev
);
484 * Configures the advertisement and resets
485 * autonegotiation if phydev->autoneg is on,
486 * forces the speed to the current settings in phydev
487 * if phydev->autoneg is off
489 int (*config_aneg
)(struct phy_device
*phydev
);
491 /* Determines the auto negotiation result */
492 int (*aneg_done
)(struct phy_device
*phydev
);
494 /* Determines the negotiated speed and duplex */
495 int (*read_status
)(struct phy_device
*phydev
);
497 /* Clears any pending interrupts */
498 int (*ack_interrupt
)(struct phy_device
*phydev
);
500 /* Enables or disables interrupts */
501 int (*config_intr
)(struct phy_device
*phydev
);
504 * Checks if the PHY generated an interrupt.
505 * For multi-PHY devices with shared PHY interrupt pin
507 int (*did_interrupt
)(struct phy_device
*phydev
);
509 /* Clears up any memory if needed */
510 void (*remove
)(struct phy_device
*phydev
);
512 /* Returns true if this is a suitable driver for the given
513 * phydev. If NULL, matching is based on phy_id and
516 int (*match_phy_device
)(struct phy_device
*phydev
);
518 /* Handles ethtool queries for hardware time stamping. */
519 int (*ts_info
)(struct phy_device
*phydev
, struct ethtool_ts_info
*ti
);
521 /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
522 int (*hwtstamp
)(struct phy_device
*phydev
, struct ifreq
*ifr
);
525 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
526 * the phy driver promises to deliver it using netif_rx() as
527 * soon as a timestamp becomes available. One of the
528 * PTP_CLASS_ values is passed in 'type'. The function must
529 * return true if the skb is accepted for delivery.
531 bool (*rxtstamp
)(struct phy_device
*dev
, struct sk_buff
*skb
, int type
);
534 * Requests a Tx timestamp for 'skb'. The phy driver promises
535 * to deliver it using skb_complete_tx_timestamp() as soon as a
536 * timestamp becomes available. One of the PTP_CLASS_ values
537 * is passed in 'type'.
539 void (*txtstamp
)(struct phy_device
*dev
, struct sk_buff
*skb
, int type
);
541 /* Some devices (e.g. qnap TS-119P II) require PHY register changes to
542 * enable Wake on LAN, so set_wol is provided to be called in the
543 * ethernet driver's set_wol function. */
544 int (*set_wol
)(struct phy_device
*dev
, struct ethtool_wolinfo
*wol
);
546 /* See set_wol, but for checking whether Wake on LAN is enabled. */
547 void (*get_wol
)(struct phy_device
*dev
, struct ethtool_wolinfo
*wol
);
550 * Called to inform a PHY device driver when the core is about to
551 * change the link state. This callback is supposed to be used as
552 * fixup hook for drivers that need to take action when the link
553 * state changes. Drivers are by no means allowed to mess with the
554 * PHY device structure in their implementations.
556 void (*link_change_notify
)(struct phy_device
*dev
);
558 /* A function provided by a phy specific driver to override the
559 * the PHY driver framework support for reading a MMD register
560 * from the PHY. If not supported, return -1. This function is
561 * optional for PHY specific drivers, if not provided then the
562 * default MMD read function is used by the PHY framework.
564 int (*read_mmd_indirect
)(struct phy_device
*dev
, int ptrad
,
565 int devnum
, int regnum
);
567 /* A function provided by a phy specific driver to override the
568 * the PHY driver framework support for writing a MMD register
569 * from the PHY. This function is optional for PHY specific drivers,
570 * if not provided then the default MMD read function is used by
573 void (*write_mmd_indirect
)(struct phy_device
*dev
, int ptrad
,
574 int devnum
, int regnum
, u32 val
);
576 /* Get the size and type of the eeprom contained within a plug-in
578 int (*module_info
)(struct phy_device
*dev
,
579 struct ethtool_modinfo
*modinfo
);
581 /* Get the eeprom information from the plug-in module */
582 int (*module_eeprom
)(struct phy_device
*dev
,
583 struct ethtool_eeprom
*ee
, u8
*data
);
585 /* Get statistics from the phy using ethtool */
586 int (*get_sset_count
)(struct phy_device
*dev
);
587 void (*get_strings
)(struct phy_device
*dev
, u8
*data
);
588 void (*get_stats
)(struct phy_device
*dev
,
589 struct ethtool_stats
*stats
, u64
*data
);
591 struct device_driver driver
;
593 #define to_phy_driver(d) container_of(d, struct phy_driver, driver)
595 #define PHY_ANY_ID "MATCH ANY PHY"
596 #define PHY_ANY_UID 0xffffffff
598 /* A Structure for boards to register fixups with the PHY Lib */
600 struct list_head list
;
604 int (*run
)(struct phy_device
*phydev
);
608 * phy_read_mmd - Convenience function for reading a register
609 * from an MMD on a given PHY.
610 * @phydev: The phy_device struct
611 * @devad: The MMD to read from
612 * @regnum: The register on the MMD to read
614 * Same rules as for phy_read();
616 static inline int phy_read_mmd(struct phy_device
*phydev
, int devad
, u32 regnum
)
621 return mdiobus_read(phydev
->mdio
.bus
, phydev
->mdio
.addr
,
622 MII_ADDR_C45
| (devad
<< 16) | (regnum
& 0xffff));
626 * phy_read_mmd_indirect - reads data from the MMD registers
627 * @phydev: The PHY device bus
628 * @prtad: MMD Address
629 * @addr: PHY address on the MII bus
631 * Description: it reads data from the MMD registers (clause 22 to access to
632 * clause 45) of the specified phy address.
634 int phy_read_mmd_indirect(struct phy_device
*phydev
, int prtad
, int devad
);
637 * phy_read - Convenience function for reading a given PHY register
638 * @phydev: the phy_device struct
639 * @regnum: register number to read
641 * NOTE: MUST NOT be called from interrupt context,
642 * because the bus read/write functions may wait for an interrupt
643 * to conclude the operation.
645 static inline int phy_read(struct phy_device
*phydev
, u32 regnum
)
647 return mdiobus_read(phydev
->mdio
.bus
, phydev
->mdio
.addr
, regnum
);
651 * phy_write - Convenience function for writing a given PHY register
652 * @phydev: the phy_device struct
653 * @regnum: register number to write
654 * @val: value to write to @regnum
656 * NOTE: MUST NOT be called from interrupt context,
657 * because the bus read/write functions may wait for an interrupt
658 * to conclude the operation.
660 static inline int phy_write(struct phy_device
*phydev
, u32 regnum
, u16 val
)
662 return mdiobus_write(phydev
->mdio
.bus
, phydev
->mdio
.addr
, regnum
, val
);
666 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
667 * @phydev: the phy_device struct
669 * NOTE: must be kept in sync with addition/removal of PHY_POLL and
670 * PHY_IGNORE_INTERRUPT
672 static inline bool phy_interrupt_is_valid(struct phy_device
*phydev
)
674 return phydev
->irq
!= PHY_POLL
&& phydev
->irq
!= PHY_IGNORE_INTERRUPT
;
678 * phy_is_internal - Convenience function for testing if a PHY is internal
679 * @phydev: the phy_device struct
681 static inline bool phy_is_internal(struct phy_device
*phydev
)
683 return phydev
->is_internal
;
687 * phy_interface_is_rgmii - Convenience function for testing if a PHY interface
688 * is RGMII (all variants)
689 * @phydev: the phy_device struct
691 static inline bool phy_interface_is_rgmii(struct phy_device
*phydev
)
693 return phydev
->interface
>= PHY_INTERFACE_MODE_RGMII
&&
694 phydev
->interface
<= PHY_INTERFACE_MODE_RGMII_TXID
;
698 * phy_is_pseudo_fixed_link - Convenience function for testing if this
699 * PHY is the CPU port facing side of an Ethernet switch, or similar.
700 * @phydev: the phy_device struct
702 static inline bool phy_is_pseudo_fixed_link(struct phy_device
*phydev
)
704 return phydev
->is_pseudo_fixed_link
;
708 * phy_write_mmd - Convenience function for writing a register
709 * on an MMD on a given PHY.
710 * @phydev: The phy_device struct
711 * @devad: The MMD to read from
712 * @regnum: The register on the MMD to read
713 * @val: value to write to @regnum
715 * Same rules as for phy_write();
717 static inline int phy_write_mmd(struct phy_device
*phydev
, int devad
,
723 regnum
= MII_ADDR_C45
| ((devad
& 0x1f) << 16) | (regnum
& 0xffff);
725 return mdiobus_write(phydev
->mdio
.bus
, phydev
->mdio
.addr
, regnum
, val
);
729 * phy_write_mmd_indirect - writes data to the MMD registers
730 * @phydev: The PHY device
731 * @prtad: MMD Address
733 * @data: data to write in the MMD register
735 * Description: Write data from the MMD registers of the specified
738 void phy_write_mmd_indirect(struct phy_device
*phydev
, int prtad
,
739 int devad
, u32 data
);
741 struct phy_device
*phy_device_create(struct mii_bus
*bus
, int addr
, int phy_id
,
743 struct phy_c45_device_ids
*c45_ids
);
744 struct phy_device
*get_phy_device(struct mii_bus
*bus
, int addr
, bool is_c45
);
745 int phy_device_register(struct phy_device
*phy
);
746 void phy_device_remove(struct phy_device
*phydev
);
747 int phy_init_hw(struct phy_device
*phydev
);
748 int phy_suspend(struct phy_device
*phydev
);
749 int phy_resume(struct phy_device
*phydev
);
750 struct phy_device
*phy_attach(struct net_device
*dev
, const char *bus_id
,
751 phy_interface_t interface
);
752 struct phy_device
*phy_find_first(struct mii_bus
*bus
);
753 int phy_attach_direct(struct net_device
*dev
, struct phy_device
*phydev
,
754 u32 flags
, phy_interface_t interface
);
755 int phy_connect_direct(struct net_device
*dev
, struct phy_device
*phydev
,
756 void (*handler
)(struct net_device
*),
757 phy_interface_t interface
);
758 struct phy_device
*phy_connect(struct net_device
*dev
, const char *bus_id
,
759 void (*handler
)(struct net_device
*),
760 phy_interface_t interface
);
761 void phy_disconnect(struct phy_device
*phydev
);
762 void phy_detach(struct phy_device
*phydev
);
763 void phy_start(struct phy_device
*phydev
);
764 void phy_stop(struct phy_device
*phydev
);
765 int phy_start_aneg(struct phy_device
*phydev
);
767 int phy_stop_interrupts(struct phy_device
*phydev
);
769 static inline int phy_read_status(struct phy_device
*phydev
)
771 return phydev
->drv
->read_status(phydev
);
774 #define phydev_err(_phydev, format, args...) \
775 dev_err(&_phydev->mdio.dev, format, ##args)
777 #define phydev_dbg(_phydev, format, args...) \
778 dev_dbg(&_phydev->mdio.dev, format, ##args);
780 static inline const char *phydev_name(const struct phy_device
*phydev
)
782 return dev_name(&phydev
->mdio
.dev
);
785 void phy_attached_print(struct phy_device
*phydev
, const char *fmt
, ...)
787 void phy_attached_info(struct phy_device
*phydev
);
788 int genphy_config_init(struct phy_device
*phydev
);
789 int genphy_setup_forced(struct phy_device
*phydev
);
790 int genphy_restart_aneg(struct phy_device
*phydev
);
791 int genphy_config_aneg(struct phy_device
*phydev
);
792 int genphy_aneg_done(struct phy_device
*phydev
);
793 int genphy_update_link(struct phy_device
*phydev
);
794 int genphy_read_status(struct phy_device
*phydev
);
795 int genphy_suspend(struct phy_device
*phydev
);
796 int genphy_resume(struct phy_device
*phydev
);
797 int genphy_soft_reset(struct phy_device
*phydev
);
798 void phy_driver_unregister(struct phy_driver
*drv
);
799 void phy_drivers_unregister(struct phy_driver
*drv
, int n
);
800 int phy_driver_register(struct phy_driver
*new_driver
);
801 int phy_drivers_register(struct phy_driver
*new_driver
, int n
);
802 void phy_state_machine(struct work_struct
*work
);
803 void phy_change(struct work_struct
*work
);
804 void phy_mac_interrupt(struct phy_device
*phydev
, int new_link
);
805 void phy_start_machine(struct phy_device
*phydev
);
806 void phy_stop_machine(struct phy_device
*phydev
);
807 int phy_ethtool_sset(struct phy_device
*phydev
, struct ethtool_cmd
*cmd
);
808 int phy_ethtool_gset(struct phy_device
*phydev
, struct ethtool_cmd
*cmd
);
809 int phy_mii_ioctl(struct phy_device
*phydev
, struct ifreq
*ifr
, int cmd
);
810 int phy_start_interrupts(struct phy_device
*phydev
);
811 void phy_print_status(struct phy_device
*phydev
);
812 void phy_device_free(struct phy_device
*phydev
);
813 int phy_set_max_speed(struct phy_device
*phydev
, u32 max_speed
);
815 int phy_register_fixup(const char *bus_id
, u32 phy_uid
, u32 phy_uid_mask
,
816 int (*run
)(struct phy_device
*));
817 int phy_register_fixup_for_id(const char *bus_id
,
818 int (*run
)(struct phy_device
*));
819 int phy_register_fixup_for_uid(u32 phy_uid
, u32 phy_uid_mask
,
820 int (*run
)(struct phy_device
*));
822 int phy_init_eee(struct phy_device
*phydev
, bool clk_stop_enable
);
823 int phy_get_eee_err(struct phy_device
*phydev
);
824 int phy_ethtool_set_eee(struct phy_device
*phydev
, struct ethtool_eee
*data
);
825 int phy_ethtool_get_eee(struct phy_device
*phydev
, struct ethtool_eee
*data
);
826 int phy_ethtool_set_wol(struct phy_device
*phydev
, struct ethtool_wolinfo
*wol
);
827 void phy_ethtool_get_wol(struct phy_device
*phydev
,
828 struct ethtool_wolinfo
*wol
);
830 int __init
mdio_bus_init(void);
831 void mdio_bus_exit(void);
833 extern struct bus_type mdio_bus_type
;
836 * module_phy_driver() - Helper macro for registering PHY drivers
837 * @__phy_drivers: array of PHY drivers to register
839 * Helper macro for PHY drivers which do not do anything special in module
840 * init/exit. Each module may only use this macro once, and calling it
841 * replaces module_init() and module_exit().
843 #define phy_module_driver(__phy_drivers, __count) \
844 static int __init phy_module_init(void) \
846 return phy_drivers_register(__phy_drivers, __count); \
848 module_init(phy_module_init); \
849 static void __exit phy_module_exit(void) \
851 phy_drivers_unregister(__phy_drivers, __count); \
853 module_exit(phy_module_exit)
855 #define module_phy_driver(__phy_drivers) \
856 phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))